PDF Datasheet 1309428
Revised 06-03
Only available as PDF at:
http://www.amp.com/fiberoptics/documents/1309428.pdf
OC-3 Singlemode 9 PIN SC Transceiver - Long Reach
Product Facts
■
Complies with SONET
OC-3 SDH STM1 S-1.1
or STM1 L-1.1
■
Conforms to the 9-Pin
Industry Standard Form
Factor
■
Single power supply
(either 3.3V or 5V)
■
PECL and LVPECL data
Interface
■
Transmitter uses 1300nm
FP laser
■
Class 1 Laser Safe per
FDA/CDRH and IEC 60825-1
■
UL 60950 recognized
Applications
■
ATM 155 Mb/s Links
■
SDH STM-1 Links
■
Switches
■
Hubs
■
Routers
Tyco Electronics' Transceiver
1382615-3, a Fabry Perot based
1300 nm singlemode fiber optic
transceiver, is specified for use
in SONET OC-3 Long Reach(LR)
applications. Tyco Electronics,
recognizing the market need for a
9-pin transceiver, has developed
this transceiver with an SC duplex
optical interface.
This transceiver is designed to
send and receive pre-encoded
data over either singlemode or
multimode optical fibers and
operates from either a +3.3V or
+5V power supply. It also contains
separate DC-coupled transmitter
and receiver sections that have
PECL/LVPECL compatible data
interfaces.
Tyco Electronics also offers a wide
variety of Small Form Factor (SFF)
and Small Form-factor Pluggable
(SFP) transceivers for both singlemode and multimode applications.
This Tyco Electronics’ OC-3 9-Pin
transceiver has been extensively
tested to comply with SONET OC-3
SDH STM1 S-1.1 or SONET OC-3
SDH STM1 L-1.1. The Fabry Perot
based transmitter is certified to be
Class 1 laser safe, as defined by U.S.
and international standards. Units
are supplied with process plugs.
© Copyright 2003 by Tyco Electronics.
All Rights Reserved. AMP and Tyco are trademarks. Dimensions are in millimeters with inches (if shown) in
brackets. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners.
For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at:
http://www.tycoelectronics.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications.
1
PDF Datasheet 1309428
Revised 06-03
Only available as PDF at:
http://www.amp.com/fiberoptics/documents/1309428.pdf
OC-3 Singlemode 9 PIN SC Transceiver - Long Reach (Continued)
OC-3 Singlemode
9-Pin SC Transceiver Long Reach
Part Number
1382615-3
Transmitter Performance Specifications: (Long Reach)
(TC =0 to 70°C, VCC -VEE =3.135 to 5.25V DC)
Parameter
Symbol
Notes
Data Rate
Optical Output (avg.)
POUT
1,2
Extinction Ratio
—
3
Center Wavelength
λOUT
4
Spectral Width (RMS)
∆λ
4
Data Inputs-Voltage
VIL
5
VIH
Data Inputs-Current
IIL
5
IIH
Power Supply Voltage
VCC —
(3.3V operation)
VEE
Power Supply Voltage
VCC —
(5V operation)
VEE
Supply Current
ICC or
—
IEE
Operating Temperature
TC
—
Min
2
-5
10
1263
—
VCC -1.81
VCC -1.165
-400
Typ
Units
Mb/s
dBm
dB
nm
nm
V
3.3
Max
156
-0
—
1360
4
VCC -1.475
VCC -0.88
—
400
3.465
—
—
1310
—
—
3.135
4.75
5.0
5.25
V
—
—
140
mA
0
—
70
°C
—
µA
V
Note: All optical measurements made with a 3 meter patch cable using ITU-T Recommendation G.652 compliant
singlemode fiber.
1.
2.
3.
4.
5.
Meets Class I laser safety requirements of IEC 60825-1 and IEC 60825-2 and U.S. Department of Health
Services FDA 21 CFR 1040.11 when operated within the specified temperature and power supply ranges.
Transmitter optical output power measured per TIA/EIA 455-95. Transmitter modulated with a valid 8b/10b
data pattern.
Extinction ratio measured per TIA/EIA 526-4A with a repeating K28.7 data pattern.
Center wavelength and spectral width measured per TIA/EIA 455-127 using optical spectrum analyzer with a
valid 8b/10b data pattern.
Compatible with 10 K, 10 KH and 100 K ECL, PECL and LVPECL.
© Copyright 2003 by Tyco Electronics.
2
All Rights Reserved. AMP and Tyco are trademarks. Dimensions are in millimeters with inches (if shown) in
brackets. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners.
For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at:
http://www.tycoelectronics.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications.
PDF Datasheet 1309428
Revised 06-03
Only available as PDF at:
http://www.amp.com/fiberoptics/documents/1309428.pdf
OC-3 Singlemode 9 PIN SC Transceiver - Long Reach (Continued)
OC-3 Singlemode
9-Pin SC Transceiver Long Reach
Part Number
1382615-3
Receiver Performance Specifications: (Long Reach)
(TC =0 to 70°C, VCC -VEE =3.135 to 5.25V DC)
Parameter
Symbol
Notes
Data Rate
Optical Input Sensitivity
PIN
1
(avg.)
Receiver Overload
Optical Wavelength
λIN
—
Output Voltage Levels
VOH
VOL
Signal Detect Output
SD
Voltage
Assert
VA
2
Deassert
VD
2
SD Power Levels (avg)
Assert
PA
—
Deassert
PD
—
Hysteresis
—
—
SD Delay Time
Assert
—
Deassert
—
Power Supply Voltage
VCC —
(3.3V operation)
VEE
Power Supply Voltage
VCC —
(5V operation)
VEE
Supply Current
ICC
—
Operating Temperature
TC
—
Min
10
-34
Typ
-10
1261
VCC -1.025
VCC -1.810
—
—
—
VCC -1.025
VCC -1.810
Max
156
—
Units
Mb/s
dBm
—
1360
VCC -0.880
VCC -1.62
dBm
nm
V
V
VCC -0.880
VCC -1.62
V
V
dBm
dBm
dB
—
—
—
-34
-42
1.5
50
250
3.465
µs
3.135
—
—
3.3
4.75
5.0
5.25
V
—
0
—
—
150
70
mA
°C
—
V
Note: All optical measurements made with a 3 meter patch cable using ITU-T Recommendation G.652 compliant
singlemode fiber.
1.
2.
Measured per ITU-T Recommendation G-957.
Compatible with 10 K, 10 KH and 100 K ECL and PECL.
© Copyright 2003 by Tyco Electronics.
All Rights Reserved. AMP and Tyco are trademarks. Dimensions are in millimeters with inches (if shown) in
brackets. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners.
For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at:
http://www.tycoelectronics.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications.
3
PDF Datasheet 1309428
Revised 06-03
Only available as PDF at:
http://www.amp.com/fiberoptics/documents/1309428.pdf
OC-3 Singlemode 9 PIN SC Transceiver - Long Reach (Continued)
NOTE: Transmitter optical waveform characteristics
including rise time, fall time, pulse undershoot, pulse
overshoot, and ringing comply with this eye diagram.
These characteristics are controlled to help prevent
excessive degradation of the receiver sensitivity. The
eye mask test is performed using a receiver compliant
with ITU-T Recommended G.957.
Absolute Maximum Ratings:
Parameter
Storage temperature
Lead Soldering Limits/Time
Supply Voltage
Symbol
Units
Min
Max
TS
—
VCC-VEE
°C
°C/s
V
-40
—
-0.2
100
240/10
7.0
Regulatory Compliance:
Agency
FDA
TUV
Test Method
CDRH 21-CFR 1040 Class 1
EN60825-1:1994+A11:1996
EN60825-2:1994+A1
EN60950:1992+A1+A2+A3+A4+A11
UL /
IECEE
CB SCHEME
UL60950
IEC 60950, 3rd Edition (1999)
IEC 60825-1: 1993+A1: 1997+A2:2001
Listing Document
Accession Number: 9122051-10
TUV Product Services
Laser Class I
Protection Class III
TUV Certificate Number: B 02 05 46940 001
E141081
US/5838/UL
ESD Testing:
Test
ESD1
ESD2
Test Method
JEDEC/EIA JESD22-A-114-A
(C=100 pF, R=1500 ohm - Human
body model)
25 KV maximum air discharge
(simulates human body discharge into
a DUT)
Procedure
Pulses applied to each pin and Ground at 1 KV
40 discharges are applied per DUT to the nose. Each
module is tested with both power ON and OFF
All products which contain a laser must comply with government regulations for laser safety. In the U.S., the applicable
standard is FDA 21 CFR 1040. In other parts of the world, IEC 60825-1 applies. These transceivers were designed and
tested to the requirements of the above standards and found to be in compliance with class 1 laser safety limits. When
operated within the limits specified in this document, this product conforms to IEC 60825-1: 1993 + A1 : 1997 + A2: 2001,
class 1 laser product, requirements.
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous
radiation exposure.
Related Documents:
OC-3 Singlemode, 9-Pin, SC Duplex Transceivers Application Specification #114-13077
© Copyright 2003 by Tyco Electronics.
4
All Rights Reserved. AMP and Tyco are trademarks. Dimensions are in millimeters with inches (if shown) in
brackets. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners.
For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at:
http://www.tycoelectronics.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications.
PDF Datasheet 1309428
Revised 06-03
Only available as PDF at:
http://www.amp.com/fiberoptics/documents/1309428.pdf
OC-3 Singlemode 9 PIN SC Transceiver - Long Reach (Continued)
Package Outline Drawings
IMPORTANT: PLEASE SEE THE TYCO ELECTRONICS’ CUSTOMER DRAWING 1382615 FOR TRANSCEIVER
HOUSING DIMENSIONS AND TOLERANCES. DRAWINGS CAN BE OBTAINED ON OUR WEBSITE AT:
http://www.tycoelectronics.com OR CALL AMPFAX AT 1-800-522-6752 FOR 24HR FAX SERVICE.
© Copyright 2003 by Tyco Electronics.
All Rights Reserved. AMP and Tyco are trademarks. Dimensions are in millimeters with inches (if shown) in
brackets. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners.
For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at:
http://www.tycoelectronics.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications.
5
PDF Datasheet 1309428
Revised 06-03
Only available as PDF at:
http://www.amp.com/fiberoptics/documents/1309428.pdf
OC-3 Singlemode 9 PIN SC Transceiver - Long Reach (Continued)
Pin-Out Descriptions
Symbol
VEE RX
RD+
RDSD
VCC RX
VCC TX
TDTD+
VEE TX
PIN#
1
2
3
4
5
6
7
8
9
Function
Receiver Signal Ground [See Note 1]
Receiver Data Out [See Note 3]
Receiver Data Out Bar [See Note 3]
Signal Detect [See Note 3]
Receiver Power Supply [See Note 2]
Transmitter Power Supply [See Note 2]
Transmitter Data In Bar [See Note 3]
Transmitter Data In [See Note 3]
Transmitter Signal Ground [See Note 1]
Note 1: Transmitter and Receiver grounds are isolated inside the transceiver module.
Note 2: VCC TX and VCC RX are isolated inside the transceiver module. Use appropriate supply filtering (see application specification)
Note 3: This is a DC coupled connection. Provide appropriate termination (see application specification)
© Copyright 2003 by Tyco Electronics.
6
All Rights Reserved. AMP and Tyco are trademarks. Dimensions are in millimeters with inches (if shown) in
brackets. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners.
For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at:
http://www.tycoelectronics.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications.