Fakulti: FAKULTI KEJURUTERAAN ELEKTRIK Semakan Tarikh Keluaran Pindaan Terakhir No. Prosedur Nama Matapelajaran: Makmal Tahun 4 Kod Matapelajaran : SEE 4722 :1 : 2003 : 2009 : PK-UTM-FKE-(0)-10 SEE 4722 FAKULTI KEJURUTERAAN ELEKTRIK UNIVERSITI TEKNOLOGI MALAYSIA KAMPUS SKUDAI JOHOR ADVANCED POWER LABORATORY STUDENT PACK Open Circuited Distribution Line Disediakan oleh : Nama : PM. Dr Azhar Khairuddin Disahkan oleh : Ketua Jabatan : Prof. Madya Dr. Mohd Wazir Nama b. Mustafa Prof. Ir. Dr. Abdullah Asuhaimi Mohd Zin Tandatangan Cop : : Tandatangan Cop : : Tarikh : 6 Julai 2009 Tarikh : 15 Julai 2009 1. Problem/Project Guide: - The students have to study three phase systems. - Understand balanced and unbalanced loads. - Simulate the distribution system using suitable software and justify your answer with experimental results. The student have to accomplish their task within four weeks time. As guide, students may follow the problem solving time-line as given in table below. (a) Problem-solving Time-line Activities Week 1 Week 2 Week 3 Week 4 1. Understand/Identify/Brainstorming 2. Design/Modeling 3. Experiments/Testing/Measurement 4. Demo/Report Writing Assessment criteria are standardized for all laboratories and will generally be the same for all laboratories. Fof further understanding about the assessment criteria, please refer to PBL Fourth-year Laboratory Assessment document. (b) Report Writing Other than the general guide specified by the Laboratory Coordinator, the report must include: Experimental Procedures Experimental Data Photographs of the actual circuit construction Circuit diagram Photographs of your group members Part of the student assessment will include reporting of their weekly activities and the log book. (c) Questions That Can Help You Tackle The Problem 1. What is three phase four wire feeder? 2. When this type of feeder is important and why? 3. Why a three phase load becomes unbalanced? 2 2. Equipments list: (a) The Distribution Trainer NE9202 which is located in Advanced Power Laboratory. Manual for the Distribution Trainer is available at the laboratory. (b) Other resource: http://www.tq.com 3. Components List: (a) Cable connected 4. Software: (a) Power World 5. Additional resources: 6. References: Power World Introduction Manual 3