Type........................................................................................................................................ Date..............................................................................................
Model #..................................................................................................................Prepared by..............................................................................................
Project...........................................................................................................................................................................................................................................
Comments...................................................................................................................................................................................................................................
Urban Act Round
TM
Specification Features for 70, 100, and 150 Watt Ceramic Metal Halide lamps
General: Two-piece die-cast aluminum housing consisting of a socket compartment with
integral cooling fins connected with stainless steel screws to a separate cylindrical ballast
housing of similar design. The one piece reflector screws into the socket compartment.
Mounting yoke is connected to finned ballast housing with hand tightened, tool-less
adjustment mechanism. For re-lamping and focusing, lamp compartment is accessed via a
tool-less latch.
Optics: All reflectors are precisely spun aluminum, fully specular, anodized aluminum with
a smooth, faceted or dimpled surface. Two stainless steel screws are provided for precise
focusing of the Ceramic Metal Halide lamp arc tube within the reflector.
Lamp Enclosure: One-piece spun aluminum with 1/4" tempered glass cover rolled directly
into the front lip of the reflector, all sealed with high temperature silicone rubber gasket.
Electrical: Ballast is electronic, HPF with self configuration to supply voltage. Lamp holder is
medium base, porcelain with nickel plated contacts. All wiring is rated for 90° C.
Mounting Yoke: 3/16" stainless steel, allows for 360° rotation around the center axis and full
vertical adjustment with the finned, die-cast discs ideally sized for hand tightening. The yoke
is pre-drilled for mounting to various EYE mounting accessories.
Finish: Electro statically applied, polyester powder coated. Available in two standard colors:
White (WH) and Dark Gray (DG) with optional colors available. Add appropriate suffix to
catalog number as shown.
EYE Interior or Exterior Floodlighting Luminaires
Accessories (Field Installed)
• BT – Truss System
• F – Flange
• O2, O3, I2 – Outdoor or Indoor Arm
ETL Listed, suitable for wet locations and any mounting orientation.
Specification Language: Luminaire shall be ETL Listed wet location with an IP65 rating that
incorporates an integral electronic ballast in a separate ballast compartment for Ceramic Metal Halide
lamps. Luminaire shall be able to operate a 70, 100, or 150 Watt medium base, CMH lamp. .
The optic shall be a spun, fully specular, anodized aluminum reflector with minimum reflectance
of 90% and adjustable socket positions. Housing and door frame shall be a low copper die-cast
aluminum, polyester powder coated, with water tight strain relief and a SEOOW external cord.
Model Number: UAR – XXX – XX – XXX – XX – XX or equal.
• SHR – Shield
• TF – Tall Flange
• VIR – Visor
• UAR-BD – Barn Doors
• UAR-BS – Beam Softener
• UAR-CL-XXXXX – Dichroic Colored Glass
Protection Class: IP65
• UAR-GLSH – Glare Shield
* Standard cord length is 3 ft, factory options available for other lengths.
• UAR-LSL – Linear Spread Lens
• UAR-SN – Snoot
Urban Act Round Ordering Information: Options and Lamps
FAMILY
WATTAGE
BEAM PATTERN
BALLAST VOLTAGE
FINISH
LAMP
Options (Factory Install)
UAR
70 (70 WATT)
SN (Super Narrow)
120V (Only)
STANDARD
70W CD-5BK = 5 foot cord
100 (100 WATT)
VN (Very Narrow)
UNV (120-277V)
DG (Dark Gray)
4I CMTP70/U/932/MED
CD-7BK = 7 foot cord
150 (150 WATT)
MW (Medium Wide)
WH (White)
4K CMTP70/U/NR936/MED CD-9BK = 9 foot cord
Options
4M CMTP70/U/943/MED
Black (RAL9005)
100W
AML = Aim Lock
Charcoal (RAL7043)
5A CMTP100/U/935/MED
TTA = Tall
Dark Bronze (RAL8019) 5B CMTP100/U/942/MED
Trunnion Adapter
Gray (RAL7000)
150W
PMB/TTA = Post Top
6A CMTP150/U/928/MED
Tenon with
6C CMTP150/U/NR936/MED Tall Trunnion
6E CMTP150/U/943/MED
6G CMTP150/U/955/MED
Urban Act Round
TM
tall Trunnion
.50in 12.7mm
3X
.50in 12.7mm
2.05in 52.0mm
4.09in 103.8mm
8.98in 228.0mm
Super Narrow 6°
(SN)
8.27in 210.0mm
9.02in 229.1mm
11.82in 300.1mm
1.18in 29.9mm
7.48in 190.1mm
3X
9.84in 249.9mm
4.53in 115.0mm
8.98in 228.0mm
VERY Narrow 9°
(VN)
EYE CERA ARC®
High efficacy, high color rendering,
long life Ceramic Metal Halide lamp
13.36in 339.3mm
9.84in 249.9mm
1.18in 29.9mm
Standard TruNnion
EYE Interior or Exterior Floodlighting Luminaires
Specification Features for 70, 100, and 150 Watt CMH lamps
Photometrics
using a 150W
CERA ARC®/ 2800ºK CCT / 95 CRI Lamp
2.05in 52.0mm
4.09in 103.8mm
6º
NEMA.
1x1
Super
Narrow.
Beam
medium wide 23°
9º
NEMA.
1x1
Very.
Narrow
Beam
(MW)
23º
NEMA.
2x2
Medium
Wide.
Beam
(SN)
(VN)
(MW)
EYE Lighting International of North America, Inc.
a division of Iwasaki Electric of Japan
9150 Hendricks Road
Mentor, Ohio 44060
Tel: (888) 665-2677
Fax: (440) 350-7001
m Printed with soy-based inks on mixed-source paper (55% recycled, 30% post consumer waste).
www.eyelighting.com
EQS-N-52-84-00045 REV JULY 12