PREAMP-1UP - Pre-Amplifier
Sound from the Socket
Description of features:
A microphone with a 6.3 mm plug and a sound source, e.g. CD player, tuner, etc. with RCA plugs can be
connected to the preamplifier PREAMP-1UP and be adjusted separately via the two front controls.
The preamplifier PREAMP-1UP is connected to the power amplifier AMP-1UP. The cabling can be realised
via the main lead, i.e. the signals can be fed through from one unit to the other.
A max. of 20 power amplifiers AMP-1UP can be connected to one preamplifier PREAMP-1UP. The speakers
must be connected to the power amplifier AMP-1UP. Two 8 Ohm speakers or one 4 Ohm speaker can be
operated with one power amplifier.
•
•
•
•
Designed for transmitting announcements and music conveniently to different rooms
Individual volume control and switching-off possible in each room
Compatible with many standard switches
Suitable for standard 63 mm flush-mounted wall sockets
Flush-mounted preamplifier
• For connection of up to 20 power amplifiers AMP-1UP
• Fitted metal base plate
• Connections and level controls for line input and microphone input
Description of features:
A microphone with a 6.3 mm plug and a sound source, e.g. CD player and tuner with RCA plugs, can be
connected to the preamplifier PREAMP-1UP and adjusted separately via the two front controls. The level
control of the microphone also serves as the ON/OFF switch of the preamplifier. If several sound sources are
to be reproduced optionally in every room, the hi-fi system has to be connected to the "line" input of the
PREAMP-1UP via the "tape out" output of the hi-fi amplifier. Thus, the reproduced sound source in the
Import: MONACOR Nederland bv - Hofstraat 2 - 6581 KX MALDEN - www.monacor.nl - info@monacor.nl
adjoining rooms is always identical to the one selected at the hi-fi system in the living room.
Therefore, the amplifier should always be built-in near the hi-fi system. At greater distances between the
sound source or hi-fi system and the preamplifer, it is recommended to use a screened cable for the audio
signal. It has to be supplied with DC current 24 V.
The preamplifier PREAMP-1UP must be connected to the power amplifier AMP-1UP. The cabling can be
realised via the main lead, ie. the signals can be fed through from one unit to the other. A maximum of 20
power amplifiers AMP-1UP can be connected to one preamplifier PREAMP-1UP. Please refer to the basic
wiring diagram for the recommendation of cabling. The speakers must be connected to the power amplifier
AMP-1UP. Two 8 Ohm or one 4 Ohm speaker can be operated with one power amplifier. If several
speakers are to be connected to one power amplifier AMP-1UP, the signals have to be passed on at each
speaker, because the max. cross section for connection of the terminals of the AMP-1UP is 1.0 mm2. A
junction box can also be placed. The power amplifiers AMP-1UP must also be supplied with DC current 24
V. The cabling must be arranged radially or a junction box must be placed.
The max. cross section for connection of the terminals of the AMP-1UP is 1.5 mm2. Thus, it is only possible
to connect one cable at a time.
Import: MONACOR Nederland bv - Hofstraat 2 - 6581 KX MALDEN - www.monacor.nl - info@monacor.nl
Technische gegevens:
Frequency range
Input
Output
Control voltage
Power supply
Connection
:
:
:
:
:
:
20-20,000 Hz (line)40-15,000 Hz (mic)
400 mV (line)4 mV (mic)
5 V max./50 Ohm
DC current 0-10 V
DC current 22-26 V/0.025 A
7-pole terminal strip,removable1 x RCA L/R (line)1 x
6.3 mm jack (mic)
Import: MONACOR Nederland bv - Hofstraat 2 - 6581 KX MALDEN - www.monacor.nl - info@monacor.nl