CDR cable distribution racks
Characteristics
•Only 300mm deep and completely front-accessible
•Lightweight 2-post design for improved access to cables
•Available as 900 mm or 1200 mm wide variants
•Up to 1620 duplex LC ports per 47U 900mm cabinet
•Up to 1080 MPO ports per 47U 1200mm cabinet
•Integrated cable over-length management
•Perforated doors to match nearby equipment cabinets
•Quick release doors without tools
•Mount against an unused wall or at the end of row or
•Back-to-back mount on a single floor tile of 600 mm
•Large apertures for all cable types, sizes and quantities
•Fast installation of sub-racks from the front side
•Easy mounting of sub-racks with unit position number strips
•Side by side mounting with clear cable routing
See also:
CDR accessories page 40
Fiber trays page 42
Highest packing density for evolving data centers
The CDR (Cable Distribution Rack) is a purpose-built high density fiber management rack which serves as a central cross-connect
in the main distribution area of data centers. With a footprint depth of only 300 mm, the CDR is fully modular and scalable up to
1620 ports (3240 fibers) using LC connectivity and 1080 ports (25 920 fibers) using MTP connectivity . Users can benefit from a
C-shaped construction where all internal sub-elements are completely installable and accessible from the front side. This important
feature means that CDRs can be placed back-to-back on a single floor tile or alternatively against an unused wall for minimal
space consumption.
Designed to match your data center
The CDR has been designed to match equipment cabinets in the datacenter and provide a seamless visual transition from passive
racks to active racks. The CDR’s perforated curved doors are the same design as those used on the HUBER+SUHNER equipment
cabinet range and the same quality look and feel is echoed across the complete portfolio.
Configured to suit your needs
The CDR is 47U high, 300 mm deep and comes in two standard width dimensions of 900 mm and 1200 mm. The 900 mm version
is designed for splicing and MTP-LC furcation trays and the 1200 mm version is intended for patching only, whether it be LC or
MTP cable systems.
HUBER+SUHNER Data center
37
900 mm wide
The 900 mm wide rack has integrated patch cord
management on the right hand side and can facilitate standard
fiber trays for pigtail splicing or MTP-LC furcation. Generally
the 900 mm wide rack is used for 1G and 10G serial
transmission where a standard LC connector interface is
required. The 900 mm wide cabinet is supplied as an empty
cabinet and then «tray units» can be installed on-site to accept
different types of «fiber trays» depending on the required
performance or connectivity type.
The tray unit can be fitted to the rack on-site and has a capacity
of 15 × patching trays. In a 47U high rack, a maximum of 6 ×
7U tray units can be fitted giving an overall capacity of 90 ×
fiber trays per rack. The tray unit can accommodate MTP or LC
patching trays as standard.
See page 42 for fiber trays
Characteristics
•Rear-mounted 19 inch
•Available in 2U, 3U and 7U heights
•Universal adapter plate for conduit (splicing)
or MTP adapters (plug & play)
•Adapter plates for 3 MTP adapters (3 × 12 fibers)
•2 × fiber tray positions per 1U
•Integrated patch cord mandrel
•Runner mechanism for fiber trays
Order code
Description
PU
Item no.
CDR 900 with integrated patch cord management and perforated doors, black
(47U high, 600 mm and 300 mm door)
1
85029082
7U tray unit for connecting up to 15 MTP transition fiber trays
1
85013562
Note: Please contact your local sales representative for other configurations and types
38
Description
PU
Item no.
2U tray unit for connecting up to 4 MTP transition fiber trays
1
84143144
3U tray unit for connecting up to 6 MTP transition fiber trays
1
84143135
HUBER+SUHNER Data center
1200 mm wide
The CDR 1200 is designed as a dedicated «patching rack»
and is configured by adding a 300 mm wide cable over-length
rack to the left hand side of a standard 900 mm rack. The CDR
1200 is configured so that an equal amount of cable management is provided on both sides of the rack. The 1200 mm wide
rack is better suited for patching applications with standard
connectivity (patch cords or fan-outs) or 40G and 100G
applications where MTP connectivity is required.
The patching tray unit can be fitted to the rack on-site and
has a capacity of 15 × patching trays. In a 47U high rack, a
maximum of 6 × 7U tray units can be fitted giving an overall
capacity of 90 × patching trays per rack.The patching tray unit
can accommodate MTP or LC patching trays as standard.
See page 42 for patching trays
Characteristics
•Suitable for MTP, LC and SC
•Available in 2U, 3U and 7U heights
•Up to 18 × adapters per slot (0.5U)
•Rear-mounted 19 inch
•2 × patch tray positions per 1U
•Integrated patch cord mandrels
•Runner mechanism for patch trays
Order code
Description
PU
Item no.
CDR 900 with integrated patch cord management and perforated doors and side panels, black
(47U high, 600 mm and 300 mm door)
1
85029082
CDR 300 with integrated patch cord management and perforated doors without side panels, black
(47U high, 300 mm door)
1
85029083
7U sub-rack for patch to patch solution. Accommodates up to 15 patching trays
1
85017847
Note: Please contact your local sales representative for other configurations and types
Description
PU
Item no.
2U sub-rack for patch to patch solution. Accommodates up to 4 patching trays
1
85015635
3U sub-rack for patch to patch solution. Accommodates up to 6 patching trays
1
85015637
HUBER+SUHNER Data center
39
CDR accessories
Horizontal patch cord routing channel
Characteristics
•Patch cord guide for CDR 900
•Facilitates side by side rack patching
•Facilitates front to back patching
•Can be mounted in the upper or lower position in rack
•Protective cover protects the patch cords
Order code
Description
PU
Item no.
4U routing channel for top of rack or bottom of rack mounting, silver
1
85029682
Vertical radius plate (required when routing channel is top mounted)
1
85029683
19 inch break-out plate and cover
Characteristics
•Full width plate for high quantity of cables
•Suitable for all cable sizes and fiber counts
•Provides strain relief for loose-tubes
•Provides central strength member fixation
•Protective cover for transition point of fibers
•Suitable for top or bottom rack entry
•Fast cable installation from the front side
•Easy and fast installation of new cables
Order code
40
Description
Item no.
19 inch break-out plate for conduit fixation, black
84088572
Protective cover for 19 inch break-out Plate, black
84076533
HUBER+SUHNER Data center
Conduit
Characteristics
•Over-sleeve conduit for cable loose-tubes
•30 mm bending radius protection
•External diameter 5 mm and internal diameter 3.3 mm
•Prevents loose tubes kink damage
•Provides excellent strain relief
Order code
Description
PU
Item no.
Cable conduit, solid wall, black (only for splice applications)
100 m
84014502
Cable conduit, slitted wall, black (only for splice applications)
100 m
85017566
Floor fixing kit
Characteristics
•Secures rack to concrete substrate
•Takes weight load away from tile
•Cable protection sleeves for threaded bar
•Expanding anchors provide strong fixation
•Double nut array prevents loosening during service
•Large washers provide excellent support
Order code
Description
PU
Item no.
Fastening kit for raised computer floors incl. anchors, threaded-rod, nuts and washers)
1
85029106
Fastening kit for solid concrete floors incl. anchor, nuts and washers
1
85091849
Additional rack mandrel kit
Characteristics
•Front-mountable
•Lightweight aluminium
•Adjustable dividers to separate cables
•Anti-twist
•Fast installation with front-mounted cage nut
Order code
Description
PU
Item no.
Front mountable mandrel assembly incl. 2 divider plates and end cap
5
85029681
HUBER+SUHNER Data center
41