Communications Test & Measurement Solutions
Introducing the
New HD3-P
Handheld Display
with Integrated
Patch Cord Microscope
Improved Workflow
•
•
•
•
Reduce inspection time by more than 50%
Streamline your INSPECT BEFORE YOU CONNECTSM process
No more changing, mishandling and misplacing inspection tips for the probe
Protect patch cords from contamination by “parking” it in the patch cord module
1
2
3
Patch Cord
Activate Probe
Bulkhead
Inspect
Press A/B Button
Inspect
4
Connect
Average Inspection Time
Comparison
–– 40 sec. with traditional display
–– 17 sec. with HD3-P display
Cost-savings
–– Save $0.54 per mated pair
(based on average labor cost)
–– Full return on investment after
inspecting just 600–700 connector
pairs
Scenario
The new HD3-P display from JDSU further expands the value of the popular HD3 series by
integrating a patch cord viewing microscope into the compact design. The result is a significant
increase in workflow efficiency and decrease in total inspection time. By combining the power of
two microscopes into one system, the HD3-P enables you to inspect both the “female” (bulkhead)
and “male” (patch cord) sides of a fiber interconnect at the same time. The HD3 series display is well
known for its high-quality image resolution and compact, portable design. With the addition of the
integrated patch cord microscope, the new HD3-P is sure to be the preferred tool for fiber technicians.
–– A technician who inspects 10,000
connectors will save over $5,000 in
labor/time costs
www.jdsu.com/inspect
HD3-P Handheld Display
with Integrated Patch Cord Microscope
Components & Functions
Features
–– 2 microscopes in 1 system
Patch Cord Input
Interchangeable Patch
Cord Module FMAE
Adapter
–– 1.8” TFT LCD to view clear, crisp,
detailed images of fiber end faces
with optimum resolution
Patch Cord Microscope
(PCM) “ON”
Indicator
4-pin Probe Input
Hanging Accessory
–– Ergonomic small form factor design
for ultimate portability
A/B Switch
(toggles probe/patch cord
module fiber view)
Probe Microscope
“ON” Indicator
–– 200 or 400X magnification patch
cord microscope in display
Low Battery Indicator
–– GripSwitchTM for power save mode
(conserves battery life)
Focus Control for Patch
Cord Microscope
1.8” TFT LCD
GripSwitchTM Power Save
(backside battery cover)
–– Input for WESTOVER FBP series
probe microscope
Benefits
–– Inspect both side of fiber
interconnect at one time
AC Power Input
–– Reduce inspection time by more
than 50%
–– Prevent misplacing and mishandling
inspection tips
Specifications
–– No need to change inspection tips
on the probe to inspect patch cord
side
Dimensions
130mm x 98mm x 40mm
Weight
360g with probe
Video Display
1.8” TFT LCD
Connectors
4-pin HiroseTM or hardwired to probe
Power Source
Built-in rechargeable NiMH, 800mAH
battery or AC power supply/charger
(100–240 VAC/9VDS/0.4A)
Power Mode
ƒƒ ON (continuous on)
ƒƒ GRIPSWITCHTM (activates power save)
ƒƒ OFF/CHARGE (power off/charge battery)
Run Time
~3 hours (continuous on)
Horizontal FOV (200X Probe)
350μm
Horizontal FOV (400X Probe)
550μm
Horizontal FOV (200X PCM)
350μm
Horizontal FOV (400X PCM)
550μm
Warranty
1 year
–– Inspect 1 port/channel at a time to
prevent mis-routing
–– Protect “male” (patch cord) ends
from contamination by “parking” it
in the patch cord module
Hirose is a trademark of Hirose Electronic Corporation.
NORTH AMERICA
TEL: 1 866 228 3762
FAX: 1 301 353 9216
LATIN AMERICA
TEL: +55 11 5503 3800
FAX: +55 11 5505 1598
ASIA PACIFIC
TEL: +852 2892 0990
FAX: +852 2892 0770
EMEA
TEL: +49 7121 86 2222
FAX: +49 7181 86 1222
www.jdsu.com/inspect