PROJECT INFORMATION
SIMPLESEAL™
Job Name
CSEGO SERIES – HID GRID MOUNT – OVERLAPPING DOOR
Fixture Type
Catalog Number
PRODUCT FEATURES:
Approved by
»»Recessed ceiling moun; grid for 1.0", 1.5" and 2.0" T-Bar – 2×2'
»»One-piece doorframe provides air-tight integrity of luminaire
»»Optional Food Zone/Non-Contact listing for food processing applications
»»For Hazardous applications please refer to the HSEGO series
SPECIFICATIONS:
HOUSING: 20-gauge CRS. Hole-free one-piece seam welded construction. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
DOORFRAME: 20-gauge type 304 stainless steel (#4 finish-post fabrication). One-piece 60° beveled perimeter construction. Continuous angle lens retention system. Mechanical guide for doorframe
fastener alignment. Doorframe secured to housing with stainless steel aircraft cables and 8 captive flush mounted Phillips head stainless steel fasteners. Thumb screws used for FN option. Doorframe
Gasket: One-piece closed cell extruded nitrile gasket seals doorframe to ceiling structure.
REFLECTOR: Die-formed aluminum reflector – Type V distribution.
LENS: .156" C73 tempered glass lens sealed to perimeter ledge of lens aperture with urethane sealant and secured with continuous lens retention system. L­ ens orientation – smooth side out.
See Options for alternate lens selections If required, specify lens overlay combinations inner/outer (Example: R/T). Inner lens must be glass. FN option includes FDA approved Food Zone clear
polycarbonate lens outer lens; prismatic glass inner lens.
ELECTRICAL: All HID ballasts UL listed HPF type. Wireway hole provided with hub/ring assembly. See Options listing for alternates. Mogul base lamps only.
INSTALLATION: 1.0", 1.5" and 2.0" T-Bar installation standard. See Options for T-Bar clips and earthquake clips. Consult factory for custom T-Bar ceilings.
LISTINGS: UL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone. Optional NSF2 Food Zone/non-Contact. CCEA Approved. Meets K230 Leakage
Standard for luminaire leakage in pressurized environments and FED-STD-209E/Class 100 (ISO 5) Cleanrooms.
IP65
K230
ISO 5
Class 100
FN
CCEA
OPTION
Approved
ORDERING INFORMATION (Ex: CSEGO2424-1-250S-1-120-5F-2H-R)
Model
Lamp Qty/Type
Ballast Qty
CSEGO2424
Voltage
Doorframe Option
Housing
Lens Type
Options
1
Lamp Quantity/Type
1-150S 150 Watt HPS
1-250S 250 Watt HPS
1-250M250 Watt MH
1-400S 400 Watt HPS
1-400M400 Watt MH
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
DT 120-277 Volts
Housing Options
2H 18-Ga CRS (STD)
5H 20-Ga Type 304 SS
XH 20-Ga Type 316 SS
Doorframe Options
5F 20-Ga Type 304 SS (STD)
2F 20-Ga CRS
XF 20-Ga Type 316 SS
PAF .063" Painted Fabricated Aluminum
Ballast Quantity
1One
Lens Options
Tempered Glass
R
.156" C73 Glass (STD)
Acrylic
T
.125" Clear
Polycarbonate
G
.125" Clear
Options
EC Earthquake Clips
FN** Food Zone/Non-Contact
FS Fuse & Holder
HJ Sealed Wireway
QR Quartz restrike system for maximum
100 Watt DC Bayonet Quartz Lamp
QS Quartz Socket Only
SB Specified Ballast
TC T-Bar Clips
UV UV Filtering Lens (Specify)
** Lensing consists of FDA approved Food
Zone clear polycarbonate outer lens and
prismatic glass inner lens (specify ‘R’ as
Lens Type).
Specified Lens
SL Specified Lens
DIMENSIONAL DATA
GASKET PROFILE
T-BAR INTERFACE
23.75"
Fixture
Housing
Gasket
mechanically
retained
Doorframe
CROSS SECTION
15.40"
Max.
2"
T-Bar Grid
Gasket
www.kenall.com
23.44" x 23.44"
Doorframe
P: 800-4-Kenall
F: 262-891-9701
10200 55th Street Kenosha, Wisconsin 53144
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy
American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found
at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2015 Kenall Mfg. Co. All rights reserved.
CSEGO2424-040715