Short-stroke cylinders ADVC/AEVC
Compact short-stroke cylinders with
standard port pattern from  32 mm
Optimised fitting space and height
Adaptable housing and piston rod
variants for individual applications
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
1
Short-stroke cylinders ADVC/AEVC
Key features
j 4 ... 25
j 6 ... 25
j 32 ... 100
Brief description
-N-T-
Short-stroke cylinders are ideal for
clamping tasks with short strokes,
e.g. in retaining devices.
Diameter
4 ... 100 mm
Stroke length
2.5 ... 25 mm
Fitting space comparison with 10 mm stroke
The cylinders offer:
Rapid response with applied
pressure
Large clamping forces in
comparison to their size
Minimal installation space
Integrated sensor slots for
contacting or contactless proximity
sensors
Mounting hole pattern to
VDMA 24562 for  32 ... 100 mm
Sensor slots
T-slot for proximity sensor
SME/SMT-8
100%
Standard cylinder
DNC
2
45%
Compact cylinder
ADVU
33%
Short-stroke cylin­
der
ADVC
è Internet: www.festo.com/catalog/...
C-slot for proximity sensor SME/
SMT-10
Subject to change – 2016/03
Short-stroke cylinders ADVC/AEVC
Type codes
ADVC
—
6
—
5
—
A
—
P
—
A
Type
ADVC
AEVC
Double acting short stroke cylinder
Single-acting short stroke cylinder
Piston j [mm]
Stroke [mm]
Piston rod thread
A
I
Male thread
Female thread
Without thread
Cushioning
P
Flexible cushioning rings/plates at both
ends
Position sensing
A
No position sensing
For proximity sensing
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
3
Short-stroke cylinders ADVC/AEVC
Product range overview
Function
Version
Type
Doubleacting
Without position sensing
ADVC
 4 ... 25
ADVC
 32 ... 100
With position sensing
ADVC-...-A
 6 ... 25
ADVC-...-A
 32 ... 100
Singleacting
Without position sensing
AEVC
 4 ... 25
AEVC
 32 ... 100
With position sensing
AEVC-...-A
 6 ... 25
AEVC-...-A
 32 ... 100
4
Piston j
[mm]
Stroke
[mm]
4
6, 10, 12
16, 20, 25
32, 40
2.5; 5
5, 10
5, 10, 15, 20, 25
5, 10, 15, 20, 25
50, 63, 80, 100
10, 15, 20, 25
6, 10, 12
5, 10
16, 20, 25
5, 10, 15, 20, 25
32, 40
5, 10, 15, 20, 25
50, 63, 80, 100
10, 15, 20, 25
4
6, 10, 12
16, 20, 25
32
2.5; 5
5, 10
5, 10, 25
5, 10, 25
40, 50, 63, 80, 100
10, 25
6, 10, 12
5, 10
16, 20, 25
5, 10, 25
32
5, 10, 25
40, 50, 63, 80, 100
10, 25
è Internet: www.festo.com/catalog/...
Position sensing
–
–
n
n
–
–
n
n
Subject to change – 2016/03
Short-stroke cylinders ADVC/AEVC
Product range overview
Type
Piston rod
With male thread
è Page/Internet
Cushioning
With female thread
Without thread
Without position sensing
ADVC
 4 ... 25
n
n
From  12
n
 4 ... 12
n
ADVC
 32 ... 100
n
n
–
n
With position sensing
ADVC-...-A
 6 ... 25
n
n
From  12
n
 6 ... 12
n
ADVC-...-A
 32 ... 100
n
n
–
n
Without position sensing
AEVC
 4 ... 25
n
n
From  12
n
 4 ... 12
n
AEVC
 32 ... 100
n
n
–
n
With position sensing
AEVC-...-A
 6 ... 25
n
n
From  12
n
 6 ... 12
n
AEVC-...-A
 32 ... 100
n
n
–
n
2016/03 – Subject to change
8
8
16
16
24
24
30
30
è Internet: www.festo.com/catalog/...
5
Short-stroke cylinders ADVC/AEVC
Peripherals overview
j 32 ... 100 mm
1
5
7
2
8
3
aJ
4
aB
6
bF
aC
aD
9
aA
bE
aF
aE
aB
aF
aG
aI
bJ
aH
aJ
bA
bD
2
4
3
5
 4 ... 25 mm
Without position sensing
6
bC
bB
 6 ... 25 mm
With position sensing
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Short-stroke cylinders ADVC/AEVC
Peripherals overview
Mounting attachments and accessories
Description
1
Mounting screws
Not included in scope of delivery
1
Mounting screws
for  80, 100
Foot mounting
HNC
Flange mounting
FNC
Trunnion flange
ZNCF
Trunnion support
LNZG
Swivel flange
SNC
Clevis foot
LSNG
Clevis foot
LSNSG
Swivel flange
SNCS
Clevis foot
LBG
Swivel flange
SNCL
Swivel flange
SNCB
Clevis foot
LNG
Clevis foot
LSN
Adapter kit
DPNC
Rod eye
SGS
Right-angle clevis foot
LQG
Rod clevis
SGA
Coupling piece
KSG
Rod clevis
SG
Self-aligning rod coupler
FK
Slot cover
ABP-5-S
Proximity sensors
SME/SMT-8
Proximity sensors
SME/SMT-10
One-way flow control valve
GRLA
Push-in fitting
QS
Not included in scope of delivery
2
3
4
5
6
7
8
9
aJ
aA
aB
aC
aD
aE
aF
aG
aH
aI
bJ
bA
bB
bC
bD
bE
bF
2016/03 – Subject to change
Piston j
4, 6, 12
è Page/Internet
10, 16 … 25
32 … 100
n
DIN 84
n
DIN 912
n
DIN 912
–
–
–
n
45
–
–
n
37
–
–
n
38
–
–
n
39
–
–
n
40
–
–
n
41
–
–
n
45
–
–
n
45
–
–
n
43
–
–
n
45
–
–
n
44
–
–
n
42
–
–
n
45
–
–
n
45
–
–
n
36
–
n
n
46
–
n
n
45
–
–
n
46
–
–
n
46
–
n
n
46
n
 12
n
n
46
–
–
n
47
–
–
n
47
–
n
n
48
To regulate speed
n
n
n
48
For connecting compressed air tubing with
standard external diameters
n
n
n
quick star
For bearing and end caps
For bearing or end caps
For bearing or end caps
–
For end caps
With spherical bearing
Weld-on, with spherical bearing
With spherical bearing for end caps
–
For end caps
For end caps
–
With spherical bearing
For connecting two cylinders with identical piston
diameter to form a multi-position cylinder
With spherical bearing
–
With male thread
For compensating radial deviations
Permits a swivelling movement of the cylinder in
one plane
For compensating radial and angular deviations
To protect the sensor cable and keep dirt out of
the sensor slots
Can be integrated in the cylinder profile barrel
Can be integrated in the cylinder profile barrel
è Internet: www.festo.com/catalog/...
7
Short-stroke cylinders ADVC
Technical data, double-acting – without position sensing
-N-T-
Diameter
4 ... 100 mm
Stroke length
2.5 ... 25 mm
 4 ... 25
 32 ... 100
General technical data
Piston 
80
100
Gx
n
n
–
G¼
n
n
–
Mounting position
M3
M3
M5
M5
M5
M5
M5
Gx
Gx
Gx
Gx
–
–
–
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
–
–
–
–
–
–
–
Compressed air in accordance with ISO 8573­1:2010 [7:4:4]
Operation with lubricated medium possible (in which case lubricated operation will always be required)
Piston
Piston rod
Flexible cushioning rings/plates at both ends
Via through-holes
Via through-holes
–
Via accessories
Any
Operating conditions
Piston 
4
80
100
Operating pressure
[bar]
Ambient temperature
[°C]
Corrosion resistance class CRC1)
2 ... 8 1.5 ... 8 1 ... 8
–20 ... +80
1
Pneumatic connection
Piston rod with female thread
Piston rod with male thread
Piston rod without thread
Operating medium
Note on operating/pilot medium
Constructional design
Cushioning
Type of mounting
1)
8
4
6
6
10
10
12
12
1 ... 10
16
16
20
20
25
25
32
32
40
40
50
50
63
63
0.6 ... 10
Corrosion resistance class CRC 1 to Festo standard FN 940070
Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive
trunnions).
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Short-stroke cylinders ADVC
Technical data, double-acting – without position sensing
Forces [N] and impact energy [J]
Piston 
4
6
10
12
16
20
25
32
40
50
63
80
100
Theoretical force at 6 bar, advancing
Theoretical force at 6 bar, returning
Max. impact energy at end positions
7.5
5.7
0.003
17
13
0.005
47
40
0.03
68
51
0.06
121
91
0.10
189
141
0.14
295
247
0.18
483
415
0.26
754
686
0.36
1178
1056
0.60
1870
1750
0.64
3016
2847
0.90
4712
4418
1.20
Piston 
4
6
10
12
16
20
25
32
40
50
63
80
100
4
4.5
–
–
–
–
–
23
26
–
–
–
–
34
42
–
–
–
–
68
76
84
92
100
–
112
124
136
148
160
–
135
150
165
180
195
–
280
300
320
340
360
–
350
380
410
440
470
–
–
470
505
540
575
–
–
600
650
700
750
–
–
1570
1655
1740
1825
–
–
2480
2570
2660
2750
Piston 
4
6
10
12
16
20
25
32
40
50
63
80
100
0.2
0.25
–
–
–
–
–
2.8
3.3
–
–
–
–
6.6
7.7
–
–
–
–
11
13
15
17
19
–
22
25
28
31
34
–
27
30
33
36
39
–
46
51
56
61
66
–
69
74
79
84
89
–
–
127
135
143
151
–
–
178
186
194
202
–
–
339
351
363
375
–
–
719
739
759
779
Product weight [g]
Stroke [mm]
2.5
5
10
15
20
25
Moving load [g]
Stroke [mm]
2.5
5
10
15
20
25
–
12.5
16
–
–
–
–
1.2
1.5
–
–
–
Materials
Sectional view
3
1
2
4
Short-stroke cylinder
4
 6 ... 100
1
2
3
4
Anodised aluminium
Anodised aluminium
Anodised aluminium
Nitrile rubber
Free of copper and PTFE
Anodised aluminium
Anodised aluminium
High-alloy steel
Polyurethane
Free of copper and PTFE
Cylinder barrel
Cover cap
Piston rod
Rod seal
Note on material
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
9
Short-stroke cylinders ADVC
Technical data, double-acting – without position sensing
Download CAD data è www.festo.com
Dimensions
 4 ... 25 mm
ADVC-...-I-P
Piston rod with female thread
-H-
Note
j 4 mm
Do not exceed maximum screw-in
depth of 3 mm and maximum
tightening torque of 0.7 Nm.
j 10 mm
Depending on tolerance, the bear­
ing cap may project by up to 0.65
mm.
ADVC-...-A-P
Piston rod with male thread
j 12 mm
Depending on tolerance, the bear­
ing cap may project by up to 0.35
mm.
1 No undercut with diameter
4/6/10.
ADVC-...-P
Piston rod without thread
10
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Short-stroke cylinders ADVC
Technical data, double-acting – without position sensing

Stroke
AF
AM
[mm]
[mm]
min.
4
2.5
5
5
10
5
10
5
10
5
10
15
20
25
5
10
15
20
25
5
10
15
20
25
6
10
12
16
20
25

Stroke
[mm]
[mm]
4
2.5
5
5
10
5
10
5
10
5
10
15
20
25
5
10
15
20
25
5
10
15
20
25
6
10
12
16
20
25
2016/03 – Subject to change
D2

–0.5
D1

max.
E
EE
FB

KF
KK
–
6
–
3.3 +0.1
10
M3
1.8
–
M2
–
6
–
5 +0.1
13
M3
2.9
–
M3
–
8
7.5
5.8 +0.1
18
M5
3.4
–
M4
8
8
10.7
6 H13
20
M5
3.4
M3
M5
10
12
–
8 H13
25
M5
4.5
M4
M6
12
12
–
10 H13
32
M5
5.5
M5
M8
12
12
–
10 H13
38
M5
5.5
M5
M8
L4
L5
L6
PL
T4
TG
UO
WH
±0.1
max.
max.
MM

P1
L3
+0.2
max.
6.5
–
2
3.7
3.2
–
5.8
10
1
6
9
–
3
4.7
3
–
7
14
1
8
11.5
0.7
4
11
19
1.5
13
0.4
6
5.2
5.5
5.75
6
–
9
5.2
6
5.75
9
6
1.5
13
22
4
11.5
16.5
–
8
6
2
15
27
4
15
21
–
10
7.5
7
2
20
34
5
15.5
21.5
–
10
8
6.5
2
26
37
5
è Internet: www.festo.com/catalog/...
13
15.5
16
21
21
24
23
28
23
28
33
38
43
27
32
37
42
47
27.5
32.5
37.5
42.5
47.5
ZJ
1.8
2.9
3.4
3.4
4.6
5.7
5.7
ß1
±0.8
4
7.5
L2
14
16.5
17
22
22.5
25.5
27
32
27
32
37
42
47
32
37
42
47
52
32.5
37.5
42.5
47.5
52.5
–
–
–
5
7
9
9
11
Short-stroke cylinders ADVC
Technical data, double-acting – without position sensing
Download CAD data è www.festo.com
Dimensions
 32 ... 100 mm
ADVC-...-I-P
Piston rod with female thread
ADVC-...-A-P**
Piston rod with male thread

AF
AM
[mm]
min.
–0.5
32
40
50
63
80
100
12
12
16
16
20
24
14
14
16
16
22
28
*
**
12
BG*
min.
D2

F9
E
max.
21.7
21.7
22.8
22.8
25
25
9
9
11
11
14
14
45
53.5
63.5
75
93
113
EE
FB

H
KF
KK
Gx
Gx
Gx
Gx
Gx
G¼
5.2
5.2
6.8
6.8
8.5
8.5
7
7
7
7.5
7
13
M6
M6
M8
M8
M10
M12
M10x1.25
M10x1.25
M12x1.25
M12x1.25
M16x1.5
M20x1.5
Continuous thread with short overall length
Nut for piston rod thread included in scope of delivery
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Short-stroke cylinders ADVC
Technical data, double-acting – without position sensing

Stroke
L2
[mm]
[mm]
+0.2
32
5
10
15
20
25
5
10
15
20
25
10
15
20
25
10
15
20
25
10
15
20
25
10
15
20
25
34
39
44
49
54
34.5
39.5
44.5
49.5
54.5
38
43
48
53
45
50
55
60
50
55
60
65
59
64
69
74
40
50
63
80
100
2016/03 – Subject to change
L3
MM

P1
PL
RT
T4
TG
WH
±0.1
ß1
±0.8
5.7
12
9
8.5
M6
2.6
32.5
6
5.7
12
11
9
M6
2.6
38
6
6.8
16
11.3
9.5
M8
3.3
46.5
8
6.8
16
12.5
11.5
M8
3.3
56.5
8
9
20
15
15
M10
4.7
72
8
9
25
16.5
19
M10
6.1
89
10
è Internet: www.festo.com/catalog/...
ZJ
40
45
50
55
60
40.5
45.5
50.5
55.5
60.5
46
51
56
61
53
58
63
68
58
63
68
73
69
74
79
84
10
10
13
13
17
22
13
Short-stroke cylinders ADVC
Technical data, double-acting – without position sensing
Ordering data
Type
14
Piston 
Stroke
[mm]
[mm]
Piston rod
with male thread
Part No. Type
Piston rod
with female thread
Part No. Type
Piston rod
without thread
Part No. Type
4
2.5
5
188054
188055
ADVC-4-2,5-A-P
ADVC-4-5-A-P
–
526897
526898
ADVC-4-2,5-P
ADVC-4-5-P
6
5
10
188066
188067
ADVC-6-5-A-P
ADVC-6-10-A-P
–
526899
526900
ADVC-6-5-P
ADVC-6-10-P
10
5
10
188078
188079
ADVC-10-5-A-P
ADVC-10-10-A-P
–
526903
526904
ADVC-10-5-P
ADVC-10-10-P
12
5
10
188094
188095
ADVC-12-5-A-P
ADVC-12-10-A-P
188090
188091
ADVC-12-5-I-P
ADVC-12-10-I-P
530568
530569
ADVC-12-5-P
ADVC-12-10-P
16
5
10
15
20
25
188123
188124
188125
188126
188127
ADVC-16-5-A-P
ADVC-16-10-A-P
ADVC-16-15-A-P
ADVC-16-20-A-P
ADVC-16-25-A-P
188113
188114
188115
188116
188117
ADVC-16-5-I-P
ADVC-16-10-I-P
ADVC-16-15-I-P
ADVC-16-20-I-P
ADVC-16-25-I-P
–
20
5
10
15
20
25
188155
188156
188157
188158
188159
ADVC-20-5-A-P
ADVC-20-10-A-P
ADVC-20-15-A-P
ADVC-20-20-A-P
ADVC-20-25-A-P
188145
188146
188147
188148
188149
ADVC-20-5-I-P
ADVC-20-10-I-P
ADVC-20-15-I-P
ADVC-20-20-I-P
ADVC-20-25-I-P
–
25
5
10
15
20
25
188187
188188
188189
188190
188191
ADVC-25-5-A-P
ADVC-25-10-A-P
ADVC-25-15-A-P
ADVC-25-20-A-P
ADVC-25-25-A-P
188177
188178
188179
188180
188181
ADVC-25-5-I-P
ADVC-25-10-I-P
ADVC-25-15-I-P
ADVC-25-20-I-P
ADVC-25-25-I-P
–
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Short-stroke cylinders ADVC
Technical data, double-acting – without position sensing
Ordering data
Type
Piston 
Stroke
[mm]
[mm]
Piston rod
with male thread
Part No. Type
Piston rod
with female thread
Part No. Type
32
5
10
15
20
25
188219
188220
188221
188222
188223
ADVC-32-5-A-P
ADVC-32-10-A-P
ADVC-32-15-A-P
ADVC-32-20-A-P
ADVC-32-25-A-P
188209
188210
188211
188212
188213
ADVC-32-5-I-P
ADVC-32-10-I-P
ADVC-32-15-I-P
ADVC-32-20-I-P
ADVC-32-25-I-P
40
5
10
15
20
25
188247
188248
188249
188250
188251
ADVC-40-5-A-P
ADVC-40-10-A-P
ADVC-40-15-A-P
ADVC-40-20-A-P
ADVC-40-25-A-P
188237
188238
188239
188240
188241
ADVC-40-5-I-P
ADVC-40-10-I-P
ADVC-40-15-I-P
ADVC-40-20-I-P
ADVC-40-25-I-P
50
10
15
20
25
188272
188273
188274
188275
ADVC-50-10-A-P
ADVC-50-15-A-P
ADVC-50-20-A-P
ADVC-50-25-A-P
188264
188265
188266
188267
ADVC-50-10-I-P
ADVC-50-15-I-P
ADVC-50-20-I-P
ADVC-50-25-I-P
63
10
15
20
25
188296
188297
188298
188299
ADVC-63-10-A-P
ADVC-63-15-A-P
ADVC-63-20-A-P
ADVC-63-25-A-P
188288
188289
188290
188291
ADVC-63-10-I-P
ADVC-63-15-I-P
ADVC-63-20-I-P
ADVC-63-25-I-P
80
10
15
20
25
188320
188321
188322
188323
ADVC-80-10-A-P
ADVC-80-15-A-P
ADVC-80-20-A-P
ADVC-80-25-A-P
188312
188313
188314
188315
ADVC-80-10-I-P
ADVC-80-15-I-P
ADVC-80-20-I-P
ADVC-80-25-I-P
100
10
15
20
25
188344
188345
188346
188347
ADVC-100-10-A-P
ADVC-100-15-A-P
ADVC-100-20-A-P
ADVC-100-25-A-P
188336
188337
188338
188339
ADVC-100-10-I-P
ADVC-100-15-I-P
ADVC-100-20-I-P
ADVC-100-25-I-P
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
15
Short-stroke cylinders ADVC
Technical data, double-acting – with position sensing
-N-T-
Diameter
6 ... 100 mm
Stroke length
5 ... 25 mm
 6 ... 25
 32 ... 100
General technical data
Piston 
Pneumatic connection
Piston rod with female thread
Piston rod with male thread
Piston rod without thread
Operating medium
Note on operating/pilot medium
Constructional design
6
10
12
16
20
25
32
40
50
63
80
100
G¼
n
n
–
Mounting position
M3
M5
M5
M5
M5
M5
Gx
Gx
Gx
Gx
Gx
–
–
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
–
–
–
–
–
–
–
–
Compressed air in accordance with ISO 8573­1:2010 [7:4:4]
Operation with lubricated medium possible (in which case lubricated operation will always be required)
Piston
Piston rod
Flexible cushioning rings/plates at both ends
For proximity sensing
Via through-holes
Via through-holes
–
Via accessories
Any
Operating conditions
Piston 
6
100
Operating pressure
[bar]
Ambient temperature
[°C]
Corrosion resistance class CRC1)
1.5 ... 8 1 ... 8
1 ... 10
–20 ... +80 (note operating range of proximity sensors)
1
Cushioning
Position sensing
Type of mounting
1)
16
10
12
16
20
25
32
40
50
63
80
0.6 ... 10
Corrosion resistance class CRC 1 to Festo standard FN 940070
Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive
trunnions).
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Short-stroke cylinders ADVC
Technical data, double-acting – with position sensing
Forces [N] and impact energy [J]
Piston 
6
10
12
16
20
25
32
40
50
63
80
100
Theoretical force at 6 bar, advancing
Theoretical force at 6 bar, returning
Max. impact energy at end positions
17
13
0.005
47
40
0.03
68
51
0.06
121
91
0.10
189
141
0.14
295
247
0.18
483
415
0.26
754
686
0.36
1178
1056
0.60
1870
1750
0.64
3016
2847
0.90
4712
4418
1.20
Piston 
6
10
12
16
20
25
32
40
50
63
80
100
20
23
–
–
–
37
45
–
–
–
70
79
–
–
–
98
106
114
122
130
162
174
186
198
210
195
210
225
240
255
320
340
360
380
400
460
490
520
550
580
–
630
665
700
735
–
710
760
810
860
–
1940
2025
2110
2195
–
2970
3060
3150
3240
Piston 
6
10
12
16
20
25
32
40
50
63
80
100
1.7
2
–
–
–
8.5
9.6
–
–
–
15
17
19
21
23
26
29
32
35
38
32
35
38
41
44
50
55
60
65
70
66
71
76
81
86
–
116
124
132
140
–
158
166
174
182
–
289
301
313
325
–
555
575
595
615
Product weight [g]
Stroke [mm]
5
10
15
20
25
Moving load [g]
Stroke [mm]
5
10
15
20
25
3.2
3.7
–
–
–
Materials
Sectional view
3
1
2
4
Short-stroke cylinder
1
2
3
4
Cylinder barrel
Cover cap
Piston rod
Rod seal
Note on material
2016/03 – Subject to change
Anodised aluminium
Anodised aluminium
High-alloy steel
Polyurethane
Free of copper and PTFE
è Internet: www.festo.com/catalog/...
17
Short-stroke cylinders ADVC
Technical data, double-acting – with position sensing
Download CAD data è www.festo.com
Dimensions
 6 ... 25 mm
ADVC-...-I-P-A
Piston rod with female thread
-H-
Note
j 10 mm
Depending on tolerance, the bearing
cap may project by up to 0.65 mm.
j 12 mm
Depending on tolerance, the bearing
cap may project by up to 0.35 mm.
1 No undercut with diameter 6/10.
ADVC-...-A-P-A
Piston rod with male thread
ADVC-...-P-A
Piston rod without thread
1 Slot for proximity sensor
SME/SMT-10

Stroke
AF
AM
[mm]
[mm]
min.
–0.5
6
5
10
5
10
5
10
5
10
15
20
25
5
10
15
20
25
5
10
15
20
25
10
12
16
20
25
18
D1

max.
D2

E
EE
FB

KF
KK
max.
L3
+0.2
–
6
–
5 +0.1
16
M3
2.9
–
M3
–
8
7.5
5.8 +0.1
21
M5
3.4
–
M4
8
8
10.7
6 H13
24
M5
3.4
M3
M5
10
12
–
8 H13
28
M5
4.5
M4
M6
12
12
–
10 H13
32
M5
5.5
M5
M8
12
12
–
10 H13
38
M5
5.5
M5
M8
è Internet: www.festo.com/catalog/...
L2
25.5
30.5
27
32
36
41
35
40
45
50
55
37
42
47
52
57
37
42
47
52
57
2.9
3.4
3.4
4.6
5.7
5.7
Subject to change – 2016/03
Short-stroke cylinders ADVC
Technical data, double-acting – with position sensing

Stroke
[mm]
[mm]
6
5
10
5
10
5
10
5
10
15
20
25
5
10
15
20
25
5
10
15
20
25
10
12
16
20
25
2016/03 – Subject to change
L4
L5
L6
MM

P1
PL
T4
max.
TG
UO
±0.1
max.
WH
ß1
±0.8
5
8
–
3
5.2
3
–
10
16
1
7
10.5
0.7
4
6
6
–
14
22
1.5
8
12
0.4
6
7
6
1.5
16
26
4
12
17
–
8
8
6
2
18
32
4
15
21
–
10
7.5
7
2
20
39
5
15.5
21.5
–
10
10
6
2
26
42
5
è Internet: www.festo.com/catalog/...
ZJ
26.5
31.5
28.5
33.5
40
45
39
44
49
54
59
42
47
52
57
62
42
47
52
57
62
–
–
5
7
9
9
19
Short-stroke cylinders ADVC
Technical data, double-acting – with position sensing
Download CAD data è www.festo.com
Dimensions
 32 ... 100 mm
ADVC-...-I-P-A
Piston rod with female thread
ADVC-...-A-P-A**
Piston rod with male thread
1 Slot for proximity sensor
SME/SMT-8
2 Slot for proximity sensor
SME/SMT-10

AF
AM
[mm]
min.
–0.5
32
40
50
63
80
100
12
12
16
16
20
24
14
14
16
16
22
28
*
**
20
BG*
min.
D2

F9
E
max.
21.7
21.7
22.8
22.8
25
25
9
9
11
11
14
14
45
53.5
63.5
75
93
113
EE
FB

H
KF
KK
Gx
Gx
Gx
Gx
Gx
G¼
5.2
5.2
6.8
6.8
8.5
8.5
7
7
7
7.5
7
13
M6
M6
M8
M8
M10
M12
M10x1.25
M10x1.25
M12x1.25
M12x1.25
M16x1.5
M20x1.5
Continuous thread with short overall length
Nut for piston rod thread included in scope of delivery
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Short-stroke cylinders ADVC
Technical data, double-acting – with position sensing

Stroke
L2
[mm]
[mm]
+0.2
32
5
10
15
20
25
5
10
15
20
25
10
15
20
25
10
15
20
25
10
15
20
25
10
15
20
25
38
43
48
53
58
43
48
53
58
63
48
53
58
63
51
56
61
66
59
64
69
74
68
73
78
83
40
50
63
80
100
2016/03 – Subject to change
L3
MM

P1
PL
RT
T4
TG
WH
5.7
12
9
8.5
M6
2.6
32.5
6
5.7
12
13.5
9.5
M6
2.6
38
6
6.8
16
11.3
9.5
M8
3.3
46.5
8
6.8
16
12.5
10.5
M8
3.3
56.5
8
9
20
15
8.5
M10
4.7
72
8
9
25
16.5
10.5
M10
6.1
89
10
±0.1
è Internet: www.festo.com/catalog/...
ZJ
ß1
±0.8
44
49
54
59
64
49
54
59
64
69
56
61
66
71
59
64
69
74
67
72
77
82
78
83
88
93
10
10
13
13
17
22
21
Short-stroke cylinders ADVC
Technical data, double-acting – with position sensing
Ordering data
Type
Piston 
Stroke
[mm]
6
[mm]
Piston rod
with male thread
Part No. Type
Piston rod
with female thread
Part No. Type
Piston rod
without thread
Part No. Type
5
10
188064
188065
ADVC-6-5-A-P-A
ADVC-6-10-A-P-A
–
526901
526902
ADVC-6-5-P-A
ADVC-6-10-P-A
5
10
188076
188077
ADVC-10-5-A-P-A
ADVC-10-10-A-P-A
–
526905
526906
ADVC-10-5-P-A
ADVC-10-10-P-A
12
5
10
188092
188093
ADVC-12-5-A-P-A
ADVC-12-10-A-P-A
188088
188089
ADVC-12-5-I-P-A
ADVC-12-10-I-P-A
530572
530573
ADVC-12-5-P-A
ADVC-12-10-P-A
16
5
10
15
20
25
188118
188119
188120
188121
188122
ADVC-16-5-A-P-A
ADVC-16-10-A-P-A
ADVC-16-15-A-P-A
ADVC-16-20-A-P-A
ADVC-16-25-A-P-A
188108
188109
188110
188111
188112
ADVC-16-5-I-P-A
ADVC-16-10-I-P-A
ADVC-16-15-I-P-A
ADVC-16-20-I-P-A
ADVC-16-25-I-P-A
–
20
5
10
15
20
25
188150
188151
188152
188153
188154
ADVC-20-5-A-P-A
ADVC-20-10-A-P-A
ADVC-20-15-A-P-A
ADVC-20-20-A-P-A
ADVC-20-25-A-P-A
188140
188141
188142
188143
188144
ADVC-20-5-I-P-A
ADVC-20-10-I-P-A
ADVC-20-15-I-P-A
ADVC-20-20-I-P-A
ADVC-20-25-I-P-A
–
25
5
10
15
20
25
188182
188183
188184
188185
188186
ADVC-25-5-A-P-A
ADVC-25-10-A-P-A
ADVC-25-15-A-P-A
ADVC-25-20-A-P-A
ADVC-25-25-A-P-A
188172
188173
188174
188175
188176
ADVC-25-5-I-P-A
ADVC-25-10-I-P-A
ADVC-25-15-I-P-A
ADVC-25-20-I-P-A
ADVC-25-25-I-P-A
–
8
10
22
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Short-stroke cylinders ADVC
Technical data, double-acting – with position sensing
Ordering data
Type
Piston 
Stroke
[mm]
[mm]
Piston rod
with male thread
Part No. Type
Piston rod
with female thread
Part No. Type
32
5
10
15
20
25
188214
188215
188216
188217
188218
ADVC-32-5-A-P-A
ADVC-32-10-A-P-A
ADVC-32-15-A-P-A
ADVC-32-20-A-P-A
ADVC-32-25-A-P-A
188204
188205
188206
188207
188208
ADVC-32-5-I-P-A
ADVC-32-10-I-P-A
ADVC-32-15-I-P-A
ADVC-32-20-I-P-A
ADVC-32-25-I-P-A
40
5
10
15
20
25
188242
188243
188244
188245
188246
ADVC-40-5-A-P-A
ADVC-40-10-A-P-A
ADVC-40-15-A-P-A
ADVC-40-20-A-P-A
ADVC-40-25-A-P-A
188232
188233
188234
188235
188236
ADVC-40-5-I-P-A
ADVC-40-10-I-P-A
ADVC-40-15-I-P-A
ADVC-40-20-I-P-A
ADVC-40-25-I-P-A
50
10
15
20
25
188268
188269
188270
188271
ADVC-50-10-A-P-A
ADVC-50-15-A-P-A
ADVC-50-20-A-P-A
ADVC-50-25-A-P-A
188260
188261
188262
188263
ADVC-50-10-I-P-A
ADVC-50-15-I-P-A
ADVC-50-20-I-P-A
ADVC-50-25-I-P-A
63
10
15
20
25
188292
188293
188294
188295
ADVC-63-10-A-P-A
ADVC-63-15-A-P-A
ADVC-63-20-A-P-A
ADVC-63-25-A-P-A
188284
188285
188286
188287
ADVC-63-10-I-P-A
ADVC-63-15-I-P-A
ADVC-63-20-I-P-A
ADVC-63-25-I-P-A
80
10
15
20
25
188316
188317
188318
188319
ADVC-80-10-A-P-A
ADVC-80-15-A-P-A
ADVC-80-20-A-P-A
ADVC-80-25-A-P-A
188308
188309
188310
188311
ADVC-80-10-I-P-A
ADVC-80-15-I-P-A
ADVC-80-20-I-P-A
ADVC-80-25-I-P-A
100
10
15
20
25
188340
188341
188342
188343
ADVC-100-10-A-P-A
ADVC-100-15-A-P-A
ADVC-100-20-A-P-A
ADVC-100-25-A-P-A
188332
188333
188334
188335
ADVC-100-10-I-P-A
ADVC-100-15-I-P-A
ADVC-100-20-I-P-A
ADVC-100-25-I-P-A
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
23
Short-stroke cylinders AEVC
Technical data, single-acting – without position sensing
-N-T-
Diameter
4 ... 100 mm
Stroke length
2.5 ... 25 mm
 4 ... 25
 32 ... 100
General technical data
Piston 
80
100
Gx
n
n
–
G¼
n
n
–
Mounting position
M3
M3
M5
M5
M5
M5
M5
Gx
Gx
Gx
Gx
–
–
–
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
–
–
–
–
–
–
–
Compressed air in accordance with ISO 8573­1:2010 [7:4:4]
Operation with lubricated medium possible (in which case lubricated operation will always be required)
Piston
Piston rod
Flexible cushioning rings/plates at both ends
Via through-holes
Via through-holes
–
Via accessories
Any
Operating conditions
Piston 
4
80
100
Operating pressure
[bar]
Ambient temperature
[°C]
Corrosion resistance class CRC1)
2.5 ... 8 2 ... 8
–20 ... +80
1
Pneumatic connection
Piston rod with female thread
Piston rod with male thread
Piston rod without thread
Operating medium
Note on operating/pilot medium
Constructional design
Cushioning
Type of mounting
1)
24
4
6
6
10
10
12
16
12
1.5 ... 8 1.5 ... 10
16
20
20
25
25
32
32
40
40
50
50
63
63
1 ... 10
Corrosion resistance class CRC 1 to Festo standard FN 940070
Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive
trunnions).
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Short-stroke cylinders AEVC
Technical data, single-acting – without position sensing
Forces [N] and impact energy [J]
Piston 
4
6
10
12
16
20
25
32
40
50
63
80
100
Theoretical force at 6 bar, advancing
Theoretical force at 6 bar, returning
Max. impact energy at end positions
5
1
0.003
11
3
0.005
41
3
0.03
59
4
0.06
105
5
0.10
170
101)
0.14
270
15
0.18
450
22
0.26
700
28
0.36
1120
40
0.60
1800
50
0.64
2900
85
0.90
4500
140
1.20
1)
AEVC-20-5-... = 5 N
-H-
The degree of friction depends upon the mounting position, and the type of load involved. Single-acting cylinders should
as far as possible be operated without lateral forces.
Note
Product weight [g]
Stroke [mm]
2.5
5
10
25
Moving load [g]
Stroke [mm]
2.5
5
10
25
Piston 
4
6
10
12
16
20
25
32
40
50
63
80
100
3.7
4.5
–
–
–
17
24
–
–
24
40
–
–
60
80
150
–
85
130
200
–
130
160
250
–
220
290
400
–
–
370
560
–
–
410
680
–
–
490
770
–
–
1900
2400
–
–
2850
3500
Piston 
4
6
10
12
16
20
25
32
40
50
63
80
100
0.15
0.2
–
–
–
2
2.6
–
–
4.4
6.9
–
–
8
11
19
–
14
21
32
–
22
25
37
–
40
48
62
–
–
65
83
–
–
105
140
–
–
157
191
–
–
327
365
–
–
678
739
–
12
18
–
–
1
1.4
–
Materials
Sectional view
3
1
2
4
Short-stroke cylinder
4
 6 ... 100
1
2
3
4
Anodised aluminium
Anodised aluminium
Anodised aluminium
Nitrile rubber
Free of copper and PTFE
Anodised aluminium
Anodised aluminium
High-alloy steel
Polyurethane
Free of copper and PTFE
Cylinder barrel
Cover cap
Piston rod
Rod seal
Note on material
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
25
Short-stroke cylinders AEVC
Technical data, single-acting – without position sensing
Download CAD data è www.festo.com
Dimensions
 4 ... 25 mm
AEVC-...-I-P
Piston rod with female thread
-H-
Note
j 10 mm
Depending on tolerance, the bear­
ing cap may project by up to 0.65
mm.
j 12 mm
Depending on tolerance, the bear­
ing cap may project by up to 0.35
mm.
AEVC-...-A-P
Piston rod with male thread
1 No undercut with diameter
4/6/10.
AEVC-...-P
Piston rod without thread
26
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Short-stroke cylinders AEVC
Technical data, single-acting – without position sensing

Stroke
AF
AM
[mm]
[mm]
min.
4
2.5
5
5
10
5
10
5
10
5
10
25
5
10
25
5
10
25
6
10
12
16
20
25

Stroke
[mm]
[mm]
4
2.5
5
5
10
5
10
5
10
5
10
25
5
10
25
5
10
25
6
10
12
16
20
25
2016/03 – Subject to change
D2

–0.5
D1

max.
E
EE
FB

KF
KK
–
6
–
3.3+0.1
10
M3
1.8
–
M2
–
6
–
5+0.1
13
M3
2.9
–
M3
–
8
7.5
5.8+0.1
18
M5
3.4
–
M4
8
8
10.7
6 H13
20
M5
3.4
M3
M5
10
12
–
8 H13
25
M5
4.5
M4
M6
12
–
10 H13
32
M5
5.5
M5
M8
12
12
–
10 H13
38
M5
5.5
M5
M8
L4
L5
L6
MM

PL
T4
TG
UO
WH
±0.1
max.
max.
L3
+0.2
8
12
L2
max.
ZJ
1.8
2.9
3.4
3.4
4.6
5.7
5.7
ß1
±0.8
4
6.5
–
2
3.2
–
5.8
10
1
6
9
–
3
3
–
7
14
1
8
11.5
0.7
4
5.5
–
11
19
1
9
13
0.4
6
6
1.5
13
22
1
11.5
16.5
–
8
6
2
15
27
1
15
21
–
10
7
2
20
34
1
15.5
21.5
–
10
6.5
2
26
37
1
è Internet: www.festo.com/catalog/...
13
15.5
16
23.4
16
23
16
27.5
20
27.5
47
20
30.5
48.5
26.1
31.1
50.2
14
16.5
17
24.4
17
24
17
28.5
21
28.5
48
21
31.5
49.5
27.1
32.1
51.2
–
–
–
–
7
9
9
27
Short-stroke cylinders AEVC
Technical data, single-acting – without position sensing
Download CAD data è www.festo.com
Dimensions
 32 ... 100 mm
AEVC-...-I-P
Piston rod with female thread
AEVC-...-A-P**
Piston rod with male thread

Stroke
[mm]
[mm]
32
5
10
25
10
25
10
25
10
25
10
25
10
25
40
50
63
80
100
*
**
28
AF
AM
BG*
min. –0.5 min.
D2

F9
E
EE
FB

H
KF
KK
max.
L2
L3
MM

PL
RT
T4
+0.2
12
14
21.7
9
45
Gx
5.2
7
M6
M10x1.25
12
14
21.7
9
53.5
Gx
5.2
7
M6
M10x1.25
16
16
22.8
11
63.5
Gx
6.8
7
M8
M12x1.25
16
16
22.8
11
75
Gx
6.8
7.5
M8
M12x1.25
20
22
25
14
93
Gx
8.5
7
M10
M16x1.5
24
28
25
14
113
G¼
8.5
13
M12
M20x1.5
26
35
50
34.5
54.5
30.6
53
35
57
52
67
59
74
TG
WH
±0.1
5.7
12
9.5
M6
2.6
32.5
5.7
12
9.5
M6
2.6
38
6.8
16
9.5
M8
3.3
46.5
6.8
16
11.5
M8
3.3
56.5
9
20
15
M10
4.7
72
9
25
19
M10
6.1
89
ZJ
ß1
±0.8
27
36
51
35.5
1
55.5
31.1
0.5
53.5
36
1
58
53
1
68
60
1
75
1
10
10
13
13
17
22
Continuous thread with short overall length
Nut for piston rod thread included in scope of delivery
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Short-stroke cylinders AEVC
Technical data, single-acting – without position sensing
Ordering data
Type
Ordering data
Type
Piston 
Stroke
[mm]
[mm]
Piston rod
with male thread
Part No. Type
Piston rod
with female thread
Part No. Type
Piston rod
without thread
Part No. Type
4
2.5
5
188052
188053
AEVC-4-2,5-A-P
AEVC-4-5-A-P
–
188050
188051
AEVC-4-2,5-P
AEVC-4-5-P
6
5
10
188062
188063
AEVC-6-5-A-P
AEVC-6-10-A-P
–
188058
188059
AEVC-6-5-P
AEVC-6-10-P
10
5
10
188074
188075
AEVC-10-5-A-P
AEVC-10-10-A-P
–
188070
188071
AEVC-10-5-P
AEVC-10-10-P
12
5
10
188086
188087
AEVC-12-5-A-P
AEVC-12-10-A-P
188082
188083
AEVC-12-5-I-P
AEVC-12-10-I-P
530566
530567
AEVC-12-5-P
AEVC-12-10-P
16
5
10
25
188105
188106
188107
AEVC-16-5-A-P
AEVC-16-10-A-P
AEVC-16-25-A-P
188099
188100
188101
AEVC-16-5-I-P
AEVC-16-10-I-P
AEVC-16-25-I-P
–
20
5
10
25
188137
188138
188139
AEVC-20-5-A-P
AEVC-20-10-A-P
AEVC-20-25-A-P
188131
188132
188133
AEVC-20-5-I-P
AEVC-20-10-I-P
AEVC-20-25-I-P
–
25
5
10
25
188169
188170
188171
AEVC-25-5-A-P
AEVC-25-10-A-P
AEVC-25-25-A-P
188163
188164
188165
AEVC-25-5-I-P
AEVC-25-10-I-P
AEVC-25-25-I-P
–
Piston 
Stroke
[mm]
[mm]
Piston rod
with male thread
Part No. Type
Piston rod
with female thread
Part No. Type
32
5
10
25
188201
188202
188203
AEVC-32-5-A-P
AEVC-32-10-A-P
AEVC-32-25-A-P
188195
188196
188197
AEVC-32-5-I-P
AEVC-32-10-I-P
AEVC-32-25-I-P
40
10
25
188230
188231
AEVC-40-10-A-P
AEVC-40-25-A-P
188226
188227
AEVC-40-10-I-P
AEVC-40-25-I-P
50
10
25
188258
188259
AEVC-50-10-A-P
AEVC-50-25-A-P
188254
188255
AEVC-50-10-I-P
AEVC-50-25-I-P
63
10
25
188282
188283
AEVC-63-10-A-P
AEVC-63-25-A-P
188278
188279
AEVC-63-10-I-P
AEVC-63-25-I-P
80
10
25
188306
188307
AEVC-80-10-A-P
AEVC-80-25-A-P
188302
188303
AEVC-80-10-I-P
AEVC-80-25-I-P
100
10
25
188330
188331
AEVC-100-10-A-P
AEVC-100-25-A-P
188326
188327
AEVC-100-10-I-P
AEVC-100-25-I-P
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
29
Short-stroke cylinders AEVC
Technical data, single-acting – with position sensing
-N-T-
Diameter
6 ... 100 mm
Stroke length
5 ... 25 mm
 6 ... 25
 32 ... 100
General technical data
Piston 
Pneumatic connection
Piston rod with female thread
Piston rod with male thread
Piston rod without thread
Operating medium
Note on operating/pilot medium
Constructional design
6
10
12
16
20
25
32
40
50
63
80
100
G¼
n
n
–
Mounting position
M3
M5
M5
M5
M5
M5
Gx
Gx
Gx
Gx
Gx
–
–
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
–
–
–
–
–
–
–
–
Compressed air in accordance with ISO 8573­1:2010 [7:4:4]
Operation with lubricated medium possible (in which case lubricated operation will always be required)
Piston
Piston rod
Flexible cushioning rings/plates at both ends
For proximity sensing
Via through-holes
Via through-holes
–
Via accessories
Any
Operating conditions
Piston 
6
100
Operating pressure
[bar]
Ambient temperature
[°C]
Corrosion resistance class CRC1)
2 ... 8
1.5 ... 8 1.5 ... 10
–20 ... +80 (note operating range of proximity sensors)
1
Cushioning
Position sensing
Type of mounting
1)
30
10
12
16
20
25
32
40
50
63
80
1 ... 10
Corrosion resistance class CRC 1 to Festo standard FN 940070
Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive
trunnions).
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Short-stroke cylinders AEVC
Technical data, single-acting – with position sensing
Forces [N] and impact energy [J]
Piston 
6
10
12
16
20
25
32
40
50
63
80
100
Theoretical force at 6 bar, advancing
Theoretical force at 6 bar, returning
Max. impact energy at end positions
11
3
0.005
41
3
0.03
59
4
0.06
105
5
0.10
170
101)
0.14
270
15
0.18
450
22
0.26
700
28
0.36
1120
40
0.60
1800
50
0.64
2900
85
0.90
4500
140
1.20
1)
AEVC-20-5-... = 5 N
-H-
The degree of friction depends upon the mounting position, and the type of load involved. Single-acting cylinders should
as far as possible be operated without lateral forces.
Note
Product weight [g]
Stroke [mm]
5
10
25
Moving load [g]
Stroke [mm]
5
10
25
Piston 
6
10
12
16
20
25
32
40
50
63
80
100
19
23
–
37
44
–
70
79
–
95
105
130
160
170
200
195
205
250
320
340
390
–
490
580
–
630
730
–
720
870
–
1940
3290
–
2970
3220
Piston 
6
10
12
16
20
25
32
40
50
63
80
100
1.5
1.8
–
8.5
9.5
–
15
17
26
26
29
40
32
35
47
49
54
67
–
70
83
–
116
140
–
155
179
–
284
321
–
546
604
3
3.5
–
Materials
Sectional view
3
1
2
4
Short-stroke cylinder
1
2
3
4
Cylinder barrel
Cover cap
Piston rod
Rod seal
Note on material
2016/03 – Subject to change
Anodised aluminium
Anodised aluminium
High-alloy steel
Polyurethane
Free of copper and PTFE
è Internet: www.festo.com/catalog/...
31
Short-stroke cylinders AEVC
Technical data, single-acting – with position sensing
Download CAD data è www.festo.com
Dimensions
 6 ... 25 mm
AEVC-...-I-P-A
Piston rod with female thread
-H-
Note
j 10 mm
Depending on tolerance, the bearing
cap may project by up to 0.65 mm.
j 12 mm
Depending on tolerance, the bearing
cap may project by up to 0.35 mm.
1 No undercut with diameter 6/10.
AEVC-...-A-P-A
Piston rod with male thread
AEVC-...-P-A
Piston rod without thread
1 Slot for proximity sensor
SME/SMT-10
32
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Short-stroke cylinders AEVC
Technical data, single-acting – with position sensing

Stroke
AF
AM
[mm]
[mm]
min.
–0.5
6
5
10
5
10
5
10
5
10
25
5
10
25
5
10
25

Stroke
[mm]
[mm]
6
5
10
5
10
5
10
5
10
25
5
10
25
5
10
25
10
12
16
20
25
10
12
16
20
25
2016/03 – Subject to change
D1

max.
D2

E
EE
FB

KF
KK
max.
L2
L3
+0.2
–
6
–
5 +0.1
16
M3
2.9
–
M3
–
8
7.5
5.8 +0.1
21
M5
3.4
–
M4
8
8
10.7
6 H13
24
M5
3.4
M3
M5
10
12
–
8 H13
28
M5
4.5
M4
M6
12
12
–
10 H13
32
M5
5.5
M5
M8
12
12
–
10 H13
38
M5
5.5
M5
M8
L4
L5
L6
MM

PL
T4
TG
UO
WH
±0.1
max.
max.
ZJ
2.9
3.4
3.4
4.6
5.7
5.7
ß1
±0.8
5
8
–
3
3
–
10
16
1
7
10.5
0.7
4
6
–
14
22
1.5
8
12
0.4
6
6
1.5
16
26
4
12
17
–
8
6
2
18
32
4
15
21
–
10
7
2
20
39
5
15.5
21.5
–
10
6
2
26
42
5
è Internet: www.festo.com/catalog/...
25.5
30.5
27
32
36
41
35
40
59.5
37
42
60
37
42
61.1
26.5
31.5
28.5
33.5
40
45
39
44
63.5
42
47
65
42
47
66.1
–
–
5
7
9
9
33
Short-stroke cylinders AEVC
Technical data, single-acting – with position sensing
Download CAD data è www.festo.com
Dimensions
 32 ... 100 mm
AEVC-...-I-P-A
Piston rod with female thread
AEVC-...-A-P-A**
Piston rod with male thread
1 Slot for proximity sensor
SME/SMT-8
2 Slot for proximity sensor
SME/SMT-10

Stroke
[mm]
32
40
50
63
80
100
*
**
34
5
10
25
10
25
10
25
10
25
10
25
10
25
AF
AM
BG*
min. –0.5 min.
D2

F9
E
EE
FB

H
KF
KK
max.
12
14
21.7
9
45
Gx
5.2
7
M6
M10x1.25
12
14
21.7
9
53.5
Gx
5.2
7
M6
M10x1.25
16
16
22.8
11
63.5
Gx
6.8
7
M8
M12x1.25
16
16
22.8
11
75
Gx
6.8
7.5
M8
M12x1.25
20
22
25
14
93
Gx
8.5
7
M10
M16x1.5
24
28
25
14
113
G¼
8.5
13
M12
M20x1.5
L2
L3
MM

PL
RT
T4
TG
5.7
12
8.5
M6
2.6
32.5
6
5.7
12
9.5
M6
2.6
38
6
6.8
16
9.5
M8
3.3
46.5
8
6.8
16
10.5
M8
3.3
56.5
8
9
20
8.5
M10
4.7
72
8
9
25
10.5
M10
6.1
89
10
+0.2
38
43
58
48
63
50
65
51
66
59
74
68
83
WH
±0.1
ZJ
ß1
±0.8
44
49
64
54
69
58
73
59
74
67
82
78
93
10
10
13
13
17
22
Continuous thread with short overall length
Nut for piston rod thread included in scope of delivery
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Short-stroke cylinders AEVC
Technical data, single-acting – with position sensing
Ordering data
Type
Ordering data
Type
Piston 
Stroke
[mm]
[mm]
Piston rod
with male thread
Part No. Type
Piston rod
with female thread
Part No. Type
Piston rod
without thread
Part No. Type
6
5
10
188060
188061
AEVC-6-5-A-P-A
AEVC-6-10-A-P-A
–
188056
188057
AEVC-6-5-P-A
AEVC-6-10-P-A
10
5
10
188072
188073
AEVC-10-5-A-P-A
AEVC-10-10-A-P-A
–
188068
188069
AEVC-10-5-P-A
AEVC-10-10-P-A
12
5
10
188084
188085
AEVC-12-5-A-P-A
AEVC-12-10-A-P-A
188080
188081
AEVC-12-5-I-P-A
AEVC-12-10-I-P-A
530570
530571
AEVC-12-5-P-A
AEVC-12-10-P-A
16
5
10
25
188102
188103
188104
AEVC-16-5-A-P-A
AEVC-16-10-A-P-A
AEVC-16-25-A-P-A
188096
188097
188098
AEVC-16-5-I-P-A
AEVC-16-10-I-P-A
AEVC-16-25-I-P-A
–
20
5
10
25
188134
188135
188136
AEVC-20-5-A-P-A
AEVC-20-10-A-P-A
AEVC-20-25-A-P-A
188128
188129
188130
AEVC-20-5-I-P-A
AEVC-20-10-I-P-A
AEVC-20-25-I-P-A
–
25
5
10
25
188166
188167
188168
AEVC-25-5-A-P-A
AEVC-25-10-A-P-A
AEVC-25-25-A-P-A
188160
188161
188162
AEVC-25-5-I-P-A
AEVC-25-10-I-P-A
AEVC-25-25-I-P-A
–
Piston 
Stroke
[mm]
[mm]
Piston rod
with male thread
Part No. Type
Piston rod
with female thread
Part No. Type
32
5
10
25
188198
188199
188200
AEVC-32-5-A-P-A
AEVC-32-10-A-P-A
AEVC-32-25-A-P-A
188192
188193
188194
AEVC-32-5-I-P-A
AEVC-32-10-I-P-A
AEVC-32-25-I-P-A
40
10
25
188228
188229
AEVC-40-10-A-P-A
AEVC-40-25-A-P-A
188224
188225
AEVC-40-10-I-P-A
AEVC-40-25-I-P-A
50
10
25
188256
188257
AEVC-50-10-A-P-A
AEVC-50-25-A-P-A
188252
188253
AEVC-50-10-I-P-A
AEVC-50-25-I-P-A
63
10
25
188280
188281
AEVC-63-10-A-P-A
AEVC-63-25-A-P-A
188276
188277
AEVC-63-10-I-P-A
AEVC-63-25-I-P-A
80
10
25
188304
188305
AEVC-80-10-A-P-A
AEVC-80-25-A-P-A
188300
188301
AEVC-80-10-I-P-A
AEVC-80-25-I-P-A
100
10
25
188328
188329
AEVC-100-10-A-P-A
AEVC-100-25-A-P-A
188324
188325
AEVC-100-10-I-P-A
AEVC-100-25-I-P-A
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
35
Short-stroke cylinders ADVC/AEVC
Accessories
Adapter kit DPNC
Material:
Flange: Wrought aluminium alloy
Threaded studs, hex nuts: Galvanised
steel
Free of copper and PTFE
RoHS-compliant
+
Dimensions and ordering data
For 
Stroke
[mm]
[mm]
32
5
10, 15, 20, 25
5, 10
15, 20, 25
10
15, 20, 25
10
15, 20, 25
10, 15, 20, 25
10, 15, 20, 25
40
50
63
80
100
F1
= plus stroke length
ZJ
without position sensing
ADVC
AEVC
27
35
27
35.5
32
36
28
43
38
38
48
59
22
26
25.5
30.5
21.1
28.5
26
33
43
50
Weight
with position sensing
ADVC
AEVC
Part No.
Type
[g]
39
39
292
174418
DPNC-32
44
44
410
174419
DPNC-40
46
48
335
174420
DPNC-50
49
49
390
174421
DPNC-63
57
68
57
68
847
1200
174422
174423
DPNC-80
DPNC-100
Connecting two cylinders with identical piston j as a 3 or 4-position cylinder
A 3 or 4-position cylinder consists of
two separate cylinders whose piston
rods advance in opposing directions.
This means that depending upon
actuation and stroke pattern, this type
of cylinder can assume up to four
To achieve 3 positions
fixed, the cylinder barrel executes the
movement. The cylinder must be con­
nected with flexible line connections.
To achieve 4 positions
Two cylinders with identical stroke
length must be connected together.
36
positions. In each case the cylinder is
driven precisely against a stop. Note
that when one end of the piston rod is
Two cylinders with different stroke
lengths must be connected together.
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Short-stroke cylinders ADVC/AEVC
Accessories
Foot mounting HNC
Material:
Galvanised steel
Free of copper and PTFE
+
Dimensions and ordering data
For 
Stroke
[mm]
[mm]
32
80
100
5
10, 15, 20, 25
5, 10
15, 20, 25
10
15, 20, 25
10
15, 20, 25
10, 15, 20, 25
10, 15, 20, 25
For 
Stroke
[mm]
[mm]
32
5
10, 15, 20, 25
5, 10
15, 20, 25
10
15, 20, 25
10
15, 20, 25
10, 15, 20, 25
10, 15, 20, 25
40
50
63
40
50
63
80
100
1)
AB

AH
AO
AT
AU
SA
without position
sensing
ADVC
AEVC
7
32
6.5
4
24
77
10
36
9
4
28
85.5
10
45
9.5
5
32
92
10
50
12.5
5
32
99
12
14.5
63
71
15
17.5
6
6
41
41
122
131
XA
without position
with position
sensing
sensing
ADVC
AEVC
ADVC AEVC
59
63.5
68
75
89
100
= plus stroke length
46
50
53.5
58.5
53.1
60.5
58
65
84
91
69
73
80.5
85.5
84.6
92
89
96
124
131
XS
without position
with position
sensing
sensing
ADVC
AEVC
ADVC AEVC
CRC1)
TR
US
with position sensing
ADVC
AEVC
81
81
32
45
94
94
36
54
102
104
45
64
105
105
50
75
131
140
131
140
63
75
93
110
Part No.
Type
Weight
[g]
63
63
26
21
26
26
2
144
174369
HNC-32
72
72
30
25
30
30
2
193
174370
HNC-40
78
80
35
27.5
35
35
2
353
174371
HNC-50
81
81
35
28
35
35
2
436
174372
HNC-63
98
109
98
109
43
45
36
36
43
45
43
45
2
2
829
1009
174373
174374
HNC-80
HNC-100
Corrosion resistance class CRC 2 to Festo standard FN 940070
Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­
sphere typical for industrial applications.
-H-
Note
Screws with special lengths are
required to fit the sizes  80 mm
and  100 mm. è45
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
37
Short-stroke cylinders ADVC/AEVC
Accessories
Flange mounting FNC
Material:
Galvanised steel
Free of copper and PTFE
RoHS-compliant
+
Dimensions and ordering data
For 
Stroke
[mm]
[mm]
32
80
100
5
10, 15, 20, 25
5, 10
15, 20, 25
10
15, 20, 25
10
15, 20, 25
10, 15, 20, 25
10, 15, 20, 25
For 
Stroke
40
50
63
[mm]
[mm]
32
5
10, 15, 20, 25
5, 10
15, 20, 25
10
15, 20, 25
10
15, 20, 25
10, 15, 20, 25
10, 15, 20, 25
40
50
63
80
100
1)
= plus stroke length
D1

H11
E
FB

H13
MF
R
TF
UF
30
45
7
10
32
64
80
35
54
9
10
36
72
90
40
65
9
12
45
90
110
45
75
9
12
50
100
120
45
55
93
110
12
14
16
16
63
75
126
150
150
175
CRC1)
ZF
without position sensing
ADVC
AEVC
45
45.5
48
55
64
75
32
36
35.5
40.5
33.5
40.5
38
45
59
66
with position sensing
ADVC
AEVC
Weight
Part No.
Type
[g]
49
49
1
221
174376
FNC-32
54
54
1
291
174377
FNC-40
58
60
1
536
174378
FNC-50
61
61
1
679
174379
FNC-63
73
84
73
84
1
1
1495
2041
174380
174381
FNC-80
FNC-100
Corrosion resistance class CRC 1 to Festo standard FN 940070
Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive
trunnions).
-H-
Note
Screws with special lengths are
required to fit the sizes  80 mm
and  100 mm. è45
38
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Short-stroke cylinders ADVC/AEVC
Accessories
Trunnion flange ZNCF
Material:
Special steel casting
Free of copper and PTFE
RoHS-compliant
+
Dimensions and ordering data
For 
Stroke
[mm]
[mm]
32
80
100
5
10, 15, 20, 25
5, 10
15, 20, 25
10
15, 20, 25
10
15, 20, 25
10, 15, 20, 25
10, 15, 20, 25
For 
Stroke
40
50
63
[mm]
[mm]
32
5
10, 15, 20, 25
5, 10
15, 20, 25
10
15, 20, 25
10
15, 20, 25
10, 15, 20, 25
10, 15, 20, 25
40
50
63
80
100
1)
= plus stroke length
C2
C3
D1

H11
TD

e9
TK
TL
TM
US
XH
71
86
30
12
16
12
50
45
2
87
105
35
16
20
16
63
54
4
99
117
40
16
24
16
75
64
4
116
136
45
20
24
20
90
75
4
136
164
156
189
45
55
20
25
28
38
20
25
110
132
93
110
6
9
CRC1)
XL
without position sensing
ADVC
AEVC
43
45.5
48
55
62
78
30
34
35.5
40.5
33.1
40.5
38
45
57
69
with position sensing
ADVC
AEVC
Weight
Part No.
Type
[g]
47
47
2
150
174411
ZNCF-32
54
54
2
285
174412
ZNCF-40
58
60
2
473
174413
ZNCF-50
61
61
2
687
174414
ZNCF-63
71
87
71
87
2
2
1296
2254
174415
174416
ZNCF-80
ZNCF-100
Corrosion resistance class CRC 2 to Festo standard FN 940070
Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­
sphere typical for industrial applications.
-H-
Note
Screws with special lengths are
required to fit the sizes  80 mm
and  100 mm. è45
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
39
Short-stroke cylinders ADVC/AEVC
Accessories
Trunnion support LNZG
Material:
Trunnion support:
Anodised aluminium
Plain bearing: Plastic
Free of copper and PTFE
RoHS-compliant
Dimensions and ordering data
For 
CR
DA
FK



[mm]
D11
H13
±0.1
32
40, 50
63, 80
100
1)
40
12
16
20
25
11
15
18
20
15
18
20
25
FN
30
36
40
50
FS
10.5
12
13
16
H1
15
18
20
24.5
HB

H13
KE
6.6
9
11
14
6.8
9
11
13
NH
TH
UL
CRC1)
±0.2
18
21
23
28.5
32
36
42
50
Weight
Part No.
Type
32959
32960
32961
32962
LNZG-32
LNZG-40/50
LNZG-63/80
LNZG-100/125
[g]
46
55
65
75
2
2
2
2
83
129
178
306
Corrosion resistance class CRC 2 to Festo standard FN 940070
Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­
sphere typical for industrial applications.
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Short-stroke cylinders ADVC/AEVC
Accessories
Swivel flange SNC
Material:
Die-cast aluminium
Free of copper and PTFE
RoHS-compliant
+ = plus stroke length
1 The pivot pin is secured against rotation with a dowel pin
Dimensions and ordering data
For 
Stroke
CG
CP
[mm]
[mm]
H14
32
80
100
5
10, 15, 20, 25
5, 10
15, 20, 25
10
15, 20, 25
10
15, 20, 25
10, 15, 20, 25
10, 15, 20, 25
For 
Stroke
40
50
63
[mm]
[mm]
32
5
10, 15, 20, 25
5, 10
15, 20, 25
10
15, 20, 25
10
15, 20, 25
10, 15, 20, 25
10, 15, 20, 25
40
50
63
80
100
1)
h14
EK

h9
FL
L
SR
±0.2
14
34
10
22
13
10
16
40
12
25
16
12
21
45
16
27
16
12
21
51
16
32
21
16
25
25
65
75
20
20
36
41
22
27
16
20
CRC1)
XC
without position sensing
ADVC
AEVC
57
60.5
63
75
84
100
44
48
50.5
55.5
48.1
55.5
58
65
79
91
with position sensing
ADVC
AEVC
Weight
Part No.
Type
[g]
61
61
2
93
174383
SNC-32
69
69
2
140
174384
SNC-40
73
75
2
234
174385
SNC-50
81
81
2
331
174386
SNC-63
93
109
93
109
2
2
618
865
174387
174388
SNC-80
SNC-100
Corrosion resistance class CRC 2 to Festo standard FN 940070
Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­
sphere typical for industrial applications.
-H-
Note
Screws with special lengths are
required to fit the sizes  80 mm
and  100 mm. è45
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
41
Short-stroke cylinders ADVC/AEVC
Accessories
Swivel flange SNCB
Material:
Die-cast aluminium
Free of copper and PTFE
RoHS-compliant
+
Dimensions and ordering data
For 
Stroke
CB
[mm]
[mm]
32
80
100
5
10, 15, 20, 25
5, 10
15, 20, 25
10
15, 20, 25
10
15, 20, 25
10, 15, 20, 25
10, 15, 20, 25
For 
Stroke
40
50
63
[mm]
[mm]
32
5
10, 15, 20, 25
5, 10
15, 20, 25
10
15, 20, 25
10
15, 20, 25
10, 15, 20, 25
10, 15, 20, 25
40
50
63
80
100
1)
FL
= plus stroke length
H14
EK

e8
L
±0.2
26
10
22
13
55
8.5
45
28
12
25
16
63
12
52
32
12
27
16
71
12
60
40
16
32
21
83
16
70
50
60
16
20
36
41
22
27
103
127
16
20
90
110
57
60.5
63
75
84
100
44
48
50.5
55.5
48.1
55.5
58
65
79
91
MR
UB
h14
CRC1)
XC
without position sensing
ADVC
AEVC
ML
with position sensing
ADVC
AEVC
Weight
Part No.
Type
[g]
61
61
2
103
174390
SNCB-32
69
69
2
155
174391
SNCB-40
73
75
2
232
174392
SNCB-50
81
81
2
375
174393
SNCB-63
93
109
93
109
2
2
636
1035
174394
174395
SNCB-80
SNCB-100
Corrosion resistance class CRC 2 to Festo standard FN 940070
Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­
sphere typical for industrial applications.
-H-
Note
Screws with special lengths are
required to fit the sizes  80 mm
and  100 mm. è45
42
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Short-stroke cylinders ADVC/AEVC
Accessories
Swivel flange SNCS
Material:
SNCS 32 … 80:
Die-cast aluminium
SNCS 100:
Wrought aluminium alloy
Free of copper and PTFE
RoHS-compliant
+
Dimensions and ordering data
For 
Stroke
[mm]
[mm]
32
80
100
5
10, 15, 20, 25
5, 10
15, 20, 25
10
15, 20, 25
10
15, 20, 25
10, 15, 20, 25
10, 15, 20, 25
For 
Stroke
40
50
63
[mm]
[mm]
32
5
10, 15, 20, 25
5, 10
15, 20, 25
10
15, 20, 25
10
15, 20, 25
10, 15, 20, 25
10, 15, 20, 25
40
50
63
80
100
1)
CN

E
EP
EX
±0.2
= plus stroke length
FL
LT
MS
RA
±0.2
TG
+1
10+0.013
45 +0.2/–0.5
10.5
14
22
13
15 +0.5
14.5
32.5
12+0.015
54–0.5
12
16
25
16
17+0.5
17.5
38
16+0.015
64–0.6
15
21
27
16
20+0.5
18.5
46.5
16+0.015
75–0.6
15
21
32
21
23–0.5
23
56.5
93–0.8
109+1/–0.7
18
18
25
25
36
41
22
27
28–0.5
30±0.5
25
95
72
89
+0.018
20
20+0.018
CRC1)
XC
without position sensing
ADVC
AEVC
57
60.5
63
75
84
100
44
48
50.5
55.5
48.1
55.5
58
65
79
91
with position sensing
ADVC
AEVC
Weight
Part No.
Type
174397
SNCS-32
174398
SNCS-40
174399
SNCS-50
174400
SNCS-63
174401
174402
SNCS-80
SNCS-100
[g]
61
61
2
86
69
69
2
122
73
75
2
216
81
81
2
281
93
109
93
109
2
2
557
683
Corrosion resistance class CRC 2 to Festo standard FN 940070
Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­
sphere typical for industrial applications.
-H-
Note
Screws with special lengths are
required to fit the sizes  80 mm
and  100 mm. è45
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
43
Short-stroke cylinders ADVC/AEVC
Accessories
Swivel flange SNCL
Material:
Die-cast aluminium
Free of copper and PTFE
RoHS-compliant
+
Dimensions and ordering data
For 
Stroke
[mm]
[mm]
32
80
100
5
10, 15, 20, 25
5, 10
15, 20, 25
10
15, 20, 25
10
15, 20, 25
10, 15, 20, 25
10, 15, 20, 25
For 
Stroke
40
50
63
[mm]
[mm]
32
5
10, 15, 20, 25
5, 10
15, 20, 25
10
15, 20, 25
10
15, 20, 25
10, 15, 20, 25
10, 15, 20, 25
40
50
63
80
100
1)
CD

H9
EW
FL
–0.2/–0.6
±0.2
10
26
12
L
MR
22
13
10
28
25
16
12
12
32
27
16
12
16
40
32
21
16
16
20
50
60
36
41
22
27
16
20
CRC1)
XC
without position sensing
ADVC
AEVC
57
60.5
63
75
84
100
= plus stroke length
44
48
50.5
55.5
48.1
55.5
58
65
79
91
with position sensing
ADVC
AEVC
Weight
Part No.
Type
[g]
61
61
2
71
174404
SNCL-32
69
69
2
95
174405
SNCL-40
73
75
2
158
174406
SNCL-50
81
81
2
225
174407
SNCL-63
93
109
93
109
2
2
436
655
174408
174409
SNCL-80
SNCL-100
Corrosion resistance class CRC 2 to Festo standard FN 940070
Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­
sphere typical for industrial applications.
-H-
Note
Screws with special lengths are
required to fit the sizes  80 mm
and  100 mm. è45
44
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Short-stroke cylinders ADVC/AEVC
Accessories
Technical data è Internet: clevis foot
Part No. Type
Ordering data – Mounting attachments
Designation
For 
Part No.
Type
Designation
Clevis foot mounting LNG
32
40
50
63
80
100
33890
33891
33892
33893
33894
33895
LNG-32
LNG-40
LNG-50
LNG-63
LNG-80
LNG-100
Clevis foot mounting LSN
32
40
50
63
80
100
Clevis foot mounting LSNG
32
40
50
63
80
100
31740
31741
31742
31743
31744
31745
LSNG-32
LSNG-40
LSNG-50
LSNG-63
LSNG-80
LSNG-100
Weld-on clevis foot mounting LSNSG
32
31747
40
31748
50
31749
63
31750
80
31751
100
31752
Clevis foot LBG on swivel flange SNCS
32
31761
40
31762
50
31763
63
31764
80
31765
100
31766
Clevis foot, right-angled LQG
32, 40
50, 63
80
100
Ordering data
Special screw For 
80, 100
80
100
1)
31768
31769
31770
31771
31772
31773
For 
Clevis foot LBG on rod eye SGS
32, 40
50, 63
80
LBG-32
LBG-40
LBG-50
LBG-63
LBG-80
LBG-100
100
5561
5562
5563
5564
5565
5566
31761
31762
31763
31764
31765
31766
LSN-32
LSN-40
LSN-50
LSN-63
LSN-80
LSN-100
LSNSG-32
LSNSG-40
LSNSG-50
LSNSG-63
LSNSG-80
LSNSG-100
LBG-32
LBG-40
LBG-50
LBG-63
LBG-80
LBG-100
LQG-32
LQG-40
LQG-50
LQG-63
LQG-80
LQG-100
PU1)
For accessory
Part No.
HNC, FNC,
SNC, SNCS,
SNCL, SNCB
ZNCF
ZNCF
238600
M10x30
204138
370524
M10x40
M10x50
1
Packaging unit quantity
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
45
Short-stroke cylinders ADVC/AEVC
Accessories
Ordering data – Piston rod attachments
Designation
For 
Part No.
Type
Rod eye SGS
For 
Technical data è Internet: piston-rod attachment
Part No. Type
Rod clevis SGA
10
16
20
25
32
40
50
63
80
100
9253
9254
9255
SGS-M4
SGS-M6
SGS-M8
9261
SGS-M10x1,25
9262
SGS-M12x1,25
9263
9264
SGS-M16x1,5
SGS-M20x1,5
10
12
16
20
25
32
40
50
63
80
100
6532
–
3110
3111
SG-M4
–
SG-M6
SG-M8
6144
SG-M10x1,25
6145
SG-M12x1,25
6146
6147
SG-M16x1,5
SG-M20x1,5
32963
KSG-M10x1,25
32964
KSG-M12x1,25
32965
32966
KSG-M16x1,5
KSG-M20x1,5
Rod clevis SG
Coupling piece KSG
32
40
50
63
80
100
46
Designation
è Internet: www.festo.com/catalog/...
32
40
50
63
32
40
50
63
80
100
Self-aligning rod coupler FK
10
12
16
20
25
32
40
50
63
80
100
–
–
32954
SGA-M10x1.25
10767
SGA-M12x1,25
10768
10769
SGA-M16x1,5
SGA-M20x1,5
6528
30984
2061
2062
FK-M4
FK-M5
FK-M6
FK-M8
6140
FK-M10x1,25
6141
FK-M12x1,25
6142
6143
FK-M16x1,5
FK-M20x1,5
Subject to change – 2016/03
Short-stroke cylinders ADVC/AEVC
Accessories
Ordering data – Proximity sensors for T-slot, magneto-resistive
Type of mounting
Switch
output
Technical data è Internet: smt
Electrical connection
Cable length
[m]
Part No.
Type
Cable, 3-wire
Plug M8x1, 3-pin
Plug M12x1, 3-pin
Cable, 3-wire
Plug M8x1, 3-pin
2.5
0.3
0.3
2.5
0.3
574335
574334
574337
574338
574339
SMT-8M-A-PS-24V-E-2,5-OE
SMT-8M-A-PS-24V-E-0,3-M8D
SMT-8M-A-PS-24V-E-0,3-M12
SMT-8M-A-NS-24V-E-2,5-OE
SMT-8M-A-NS-24V-E-0,3-M8D
Cable, 3-wire
7.5
574340
SMT-8M-A-PO-24V-E-7,5-OE
N/O contact
Insertable in the slot from above, flush
with cylinder profile, short design
PNP
NPN
N/C contact
Insertable in the slot from above, flush
with cylinder profile, short design
PNP
Electrical connection
Cable length
[m]
Part No.
Technical data è Internet: sme
Type
Cable, 3-wire
Cable, 2-wire
Plug M8x1, 3-pin
Cable, 3-wire
Plug M8x1, 3-pin
2.5
5.0
2.5
0.3
2.5
0.3
543862
543863
543872
543861
150855
150857
SME-8M-DS-24V-K-2,5-OE
SME-8M-DS-24V-K-5,0-OE
SME-8M-ZS-24V-K-2,5-OE
SME-8M-DS-24V-K-0,3-M8D
SME-8-K-LED-24
SME-8-S-LED-24
Cable, 3-wire
7.5
160251
SME-8-O-K-LED-24
Electrical connection, right
Cable length
[m]
Part No.
Technical data è Internet: nebu
Type
Straight socket, M8x1, 3-pin
Cable, open end, 3-wire
Straight socket, M12x1, 5-pin
Cable, open end, 3-wire
Angled socket, M8x1, 3-pin
Cable, open end, 3-wire
Angled socket, M12x1, 5-pin
Cable, open end, 3-wire
2.5
5
2.5
5
2.5
5
2.5
5
541333
541334
541363
541364
541338
541341
541367
541370
NEBU-M8G3-K-2.5-LE3
NEBU-M8G3-K-5-LE3
NEBU-M12G5-K-2.5-LE3
NEBU-M12G5-K-5-LE3
NEBU-M8W3-K-2.5-LE3
NEBU-M8W3-K-5-LE3
NEBU-M12W5-K-2.5-LE3
NEBU-M12W5-K-5-LE3
Part No.
Type
151680
ABP-5-S
Ordering data – Proximity sensors for T-slot, magnetic reed
Type of mounting
Switch
output
N/O contact
Insertable in the slot from above, flush
with cylinder profile
Contacting
Insertable in the slot lengthwise, flush
with the cylinder profile
Contacting
Insertable in the slot lengthwise, flush
with the cylinder profile
Contacting
N/C contact
Ordering data – Connecting cables
Electrical connection, left
Ordering data – Slot cover for T-slot
Mounting
Length
Insertable from
above
2016/03 – Subject to change
2x 0.5 m
è Internet: www.festo.com/catalog/...
47
Short-stroke cylinders ADVC/AEVC
Accessories
Technical data è Internet: smt
Ordering data – Proximity switches for C-slot, magneto-resistive
Type of mounting
Switch
Electrical connection,
output
connection direction
Cable length
[m]
Part No.
Type
0,3
2,5
551375
551373
SMT-10M-PS-24V-E-0,3-L-M8D
SMT-10M-PS-24V-E-2,5-L-OE
Cable length
[m]
Part No.
Technical data è Internet: sme
Type
0,3
2,5
173212
173210
SME-10-SL-LED-24
SME-10-KL-LED-24
Electrical connection, right
Cable length
[m]
Part No.
Technical data è Internet: nebu
Type
Straight socket, M8x1, 3-pin
Cable, open end, 3-wire
Angled socket, M8x1, 3-pin
Cable, open end, 3-wire
2,5
5
2,5
5
541333
541334
541338
541341
NEBU-M8G3-K-2.5-LE3
NEBU-M8G3-K-5-LE3
NEBU-M8W3-K-2.5-LE3
NEBU-M8W3-K-5-LE3
Material
Part No.
Type
3
3
4
6
3
4
6
8
6
8
10
Metal design
175041
193137
193138
193139
193142
193143
193144
193145
193146
193147
193148
GRLA-M3-QS-3
GRLA-M5-QS-3-D
GRLA-M5-QS-4-D
GRLA-M5-QS-6-D
GRLA-x-QS-3-D
GRLA-x-QS-4-D
GRLA-x-QS-6-D
GRLA-x-QS-8-D
GRLA-¼-QS-6-D
GRLA-¼-QS-8-D
GRLA-¼-QS-10-D
3
3
4
6
3
4
6
8
Metal design
175043
193153
193154
193155
193156
193157
193158
193159
GRLZ-M3-QS-3
GRLZ-M5-QS-3-D
GRLZ-M5-QS-4-D
GRLZ-M5-QS-6-D
GRLZ-x-QS-3-D
GRLZ-x-QS-4-D
GRLZ-x-QS-6-D
GRLZ-x-QS-8-D
N/O contact
Insertable in the slot from
above
PNP
Plug M8x1, 3-pin, in-line
Cable, 3-wire, in-line
Ordering data – Proximity switches for C-slot, magnetic reed
Type of mounting
Switch
Electrical connection,
output
connection direction
N/O contact
Insertable in the slot
lengthwise
Contacting
Ordering data – Connecting cables
Electrical connection, left
Ordering data – One-way flow control valves
Connection
Thread
Plug M8x1, 3-pin, in-line
Cable, 3-wire, in-line
Technical data è Internet: grl
For tubing O.D.
For exhaust air
M3
M5
Gx
G¼
For supply air
M3
M5
Gx
48
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Product Range and Company Overview
A Complete Suite and Company Overview
Our experienced engineers provide complete support at every stage of your development process, including: conceptualization,
analysis, engineering, design, assembly, documentation, validation, and production
Custom Automation Components
Complete custom engineered solutions
Custom Control Cabinets
Comprehensive engineering support
and on-site services
Complete Systems
Shipment, stocking and storage services
The Broadest Range of Automation Components
With a comprehensive line of more than 30,000 automation components, Festo is capable of solving the most complex
automation requirements
Electromechanical
Electromechanical actuators, motors,
controllers & drivers
Pneumatics
Pneumatic linear and rotary actuators,
valves, and air supply
P/Cs and ,O 'evices
PLC’s, operator interfaces, sensors
and I/O devices
To meet this commitment, we strive to ensure a consistent, integrated, and systematic approach to
management that will meet or exceed the requirements of the ISO 9001 standard for Quality
0anagement and the ISO 1001 standard for (nvironmental 0anagement
ISO 9001
ISO 14001
&HUWLÀHG
Company
&(57&$$4(617*$
4ualit\ Assurance ,SO and ,SO Certiącations
Festo Corporation is committed to supply all Festo products and services that will meet or exceed
our customersn reTuirements in product Tuality, delivery, customer service and satisfaction
&(57&$4(617*$
Supporting Advanced Automation… As No One Else Can!
Festo is a leading global manufacturer of pneumatic and electromechanical systems, components and controls for industrial
automation, Zith more than , employees in national headTuarters serYing more than countries For more than years,
Festo has continuously elevated the state of manufacturing with innovations and optimized motion control solutions that deliver higher
performing, more proątable automated manufacturing and processing eTuipment 2ur dedication to the advancement of automation
extends beyond technology to the education and development of current and future automation and robotics designers with simulation
tools, teaching programs, and onsite services
 Copyright 01, Festo Corporation :hile every effort is made to ensure that all dimensions and speciącations are correct, Festo cannot guarantee that publications are
completely free of any error, in particular typing or printing errors $ccordingly, Festo cannot be held responsible for the same For /iability and :arranty conditions, refer to our
oTerms and Conditions of Salep, available from your local Festo ofące $ll rights reserved 1o part of this publication may be reproduced, distributed, or transmitted in any form
or by any means, electronic, mechanical, photocopying or otherwise, without the prior written permission of Festo $ll technical data subMect to change according to technical
update
Printed on recycled paper at 1ew +orizon *raphic, Inc, FSC certiąed as an environmental friendly printing plant
Festo North America
1 Festo Canada
Headquarters
Festo Inc.
5300 Explorer Drive
0ississauga, O1
LW 5*
2 Montréal
5600, Trans-Canada
Pointe-Claire, QC
+95 1%6
3 Québec City
930, rue Watt11
Québec, QC
*1; *3
4 Festo United States
Headquarters
Festo Corporation
395 Moreland Road
+auppauge, 1<
11
5 Appleton
1orth 9 Tower 9iew Drive, Suite 1
Greenville, WI
59
7 'etroit
11 West Long Lake Road
Troy, MI
09
6 Chicago
5 W Algonquin - Suite 30
Arlington +eights, IL
60005
8 Silicon Valley
935 Southfront Road, Suite F
Livermore, CA
9550
Festo Regional Contact Center
Canadian Customers
Commercial Support:
Tel: 1 *O FESTO 1 3 3
Fax: 1 F; FESTO 1 393 3
Email: festocanada#cafestocom
Technical Support:
Tel:1 *O FESTO 1 3 3
Fax:1 F; FESTO1 393 3
Email: technicalsupport#cafestocom
USA Customers
Commercial Support:
Tel:1 00 99 FESTO 1 00 993 3
Fax:1 00 9 FESTO 1 00 93 3
Email: customerservice#usfestocom
Technical Support:
Tel:1 *O FESTO 1 3 3
Fax:100 9 FESTO1 00 93 3
Email: productsupport#usfestocom
SubMect to change
Internet: www.festo.com/us