PC-based Industrial Data Acquisition with analogand digital boards

advertisement
PC-based Industrial
Data Acquisition
with analog and digital boards
Multifunction boards
l
l
l
l
l
l
Optical isolation 500 V
4 to 16 A/D channels, 100 kHz
16-bit resolution
4 or 8 D/A, 14-bit, 20 µs
Sequence-scan
FIFO, PCI-DMA
Digital I-/O boards
l
l
l
l
16 to 32 digital I/O, 24 V,
optical isolated to 1000 V
Pole reversal protection
Short-circuit protection
Watchdog
Standard Driver
l
l
l
l
Your advantages at a
glance!
l
l
l
l
l
l
High safety from interference
Device drivers supplied
with programming examples
Configuration and operation made easy
Extensive technical support and service
All products available from stock
Long-term availability
Windows NT/98/95/3.11,
LabView ,
LabWindows/CVI ,
Delphi , VB, C, C++, DLL ...
TM
TM
TM
TM
Data Acquisition with Interference-proof PCI Boards
Multi-channel data acquisition
For the industrial data acquisition and controlling ADDI-DATA has
developed the ADDIALOG family comprising 9 analog PC boards
for the PCI bus which are used for process controlling,
measurement and monitoring as well as for multi-channel data
acquisition.
Gain and input features (measuring rate, single ended/
differential, unipolar/bipolar) can be programmed individually for
each channel, so that each channel can be set optimally
according to the measurement requirements of the application in
question.
Different types of conversion supported by functionalities like
programmable timer, scan or external trigger signal make sure
that the PC processor capacity is not fully utilized.
All outputs are protected against short circuits and fitted with EMI
filters.
Voltage signals and current inputs are measured most accurately
up to a resolution of 16-bit.
For the processing of digital 24 V signals, additional optically
isolated digital I/O channels are available via a separate
connector.
By means of a sequence scan list the user can determine which
analog inputs can be scanned, in which order and at which
measuring velocity.
Each of the outputs has a ground channel.
Multifunctional board, PCI bus
ADDIALOG APCI-3120
Driver for
500 V electrical isolation
8 to 16 analog inputs, 16 bit
l 100 kHz data transfer rate
l Sequence scan list
l Onboard FIFO, PCI-DMA
l Digital input used as a trigger
l 4 to 8 analog outputs, 14-bit
l Protection against short circuits
on the outputs
l 8 digital I/O, 24 V, optically isolated
l
Filter
l
Programmable
gain
Isolation through
optical coupler
DC/DC converter
Protection against
over-voltage
Robust
37-pin SUB-D
connector
Driver for
Software support for
ADDI-DATA analog and digital boards
Output filter
Creeping distance
2.5 mm
For a quick and easy programmation
real-time drivers for WindowsTM NT,
drivers for WindowsTM 95/98/3.11 and
LabVIEWTM, LabWindowsTM/CVI as well
as programming examples for C, C++,
PASCALTM, Visual Basic, DelphiTM ... are
delivered with the ADDI-DATA boards.
PCI-bus for a 32-bit
access
Current driver list on request
E
AILABL
ERM AV
LONG-T
s
pCI-Bu
ALsO fO
R COMp
ACT
PCI-bus
Optical isolation I/O
SE/diff. inputs
0-10V ;±10V; 0-5V; ±5; 0-2V; ±2V
20 mA (Option)
Resolution
Data transfer rate
PGA
Protection circuitry
Analog output 0-10 V ± 10 V
Outputs resolution
Setting time
PCI-DMA, FIFO
Sequence RAM
3 Timers, Interrupt
Watchdog
Digital I/O 24 V, isolated
Multifunction Boards
Analog Input
Analog Output
APCI-3120-16-8* APCI-3120-16-4* APCI-3120-8-8*APCI-3120-8-4* APCI-3001-4* APCI-3001-8* APCI-3001-16* APCI-3501-4 APCI-3501-8
500 V
16 SE/
8 diff.
yes
16-bit
100 kHz
yes
yes
8
14-bit
20 µs
yes
yes
yes
yes
8
500 V
16 SE/
8 diff.
yes
16-bit
100 kHz
yes
yes
4
14-bit
20 µs
yes
yes
yes
yes
8
500 V
8 SE/
4 diff.
yes
16-bit
100 kHz
yes
yes
8
14-bit
20 µs
yes
yes
yes
yes
8
500 V
8 SE/
4 diff.
yes
16-bit
100 kHz
yes
yes
4
14-bit
20 µs
yes
yes
yes
yes
8
500 V
4 SE
yes
12-bit
100 kHz
yes
yes
yes
yes
yes
8
500 V
8 SE/
4 diff.
yes
12-bit
100 kHz
yes
yes
yes
yes
yes
8
500 V
16 SE/
8 diff.
yes
12-bit
100 kHz
yes
yes
yes
yes
yes
8
500 V
500 V
4
14-bit
20 µs
yes
yes
4
8
14-bit
20 µs
yes
yes
4
* - These boards are also available for the CompactPCI bus with the same technical features
All boards are delivered including technical manual and standard driver.
Contact your distributor for prices -ADDI-DATA distributors on Internet www.addi-data.com or fax your request to +49/7223 9493-92
Industrial Controlling with Digital Boards
The 4 digital boards of the ADDINUM family for the PCI bus are wellsuited for use in the industrial automation and process control
engineering.
In order to protect the boards from interference, the inputs and
outputs are electrically isolated up to 1000 V. Furthermore the
boards are protected against fast transients, electrostatic
discharge and EMI.
They are used for example in the industrial I/O controlling, the
signal generation, as interfaces to automatic test equipment, for
the ON/OFF controlling of electrical devices or as interfaces to
machines. They can switch on ventilators, valves, pumps and
electromechanical relays. All boards work on the 24V voltage level,
which corresponds to the industry standard.
To avoid any damages in your application, all outputs are set to
the status "0" after a Power-On reset.
In addition, the boards feature timers. Timers can be used as
programmable watchdogs for resetting the outputs.
On the APCI-1500, due to a readable status register the user can
check whether a short circuit or overtemperature have occurred.
Digital I/O Board APCI-1500
Protection against
short circuits,
overtemperature
and voltage drop
Filters
16 inputs, 24 V, isolated
incl. 14 interruptible
l Voltage reversal protection
l 16 outputs, 24 V, isolated,
500 mA per channel
l Protection against short circuits
l I/O Filters
l Watchdog
l Timer
l
Optical couplers
Watchdog
Interrupthandling
Protection against
overvoltage
Software
24 V Voltage supply filter
Drivers for WindowsTM NT,
WindowsTM 95/98/3.11, DOS
as well as programming examples
for C, C++ PASCALTM, Visual Basic, DelphiTM
Creeping distance 3.2 mm
Electronic fuse
Screw terminal board
with status LEDs for
connecting digital signals
Shielded connection cable
twisted pairs
Relay output board
Digital Input and Output
PCI-bus
Digital Input
Digital Output
APCI-1500*
APCI-1516
APCI-1016
Optical isolation 1000 V
1000 V
1000 V
1000 V
1000 V
Filter/Protection circuitry
yes
yes
yes
yes
Digital inputs
16
8
16
-
Interruptible inputs
14
-
-
-
Nominal voltage (V)
24 (15-30)
24 (15-30)
24 (15-30)
-
6 mA
6 mA
6 mA
-
16
8
-
16
Input current 24 V
Digital outputs
APCI-2016
Nominal voltage (V)
24 (15-36)
24 (15-36)
-
24 (15-36)
Output current/channel
500 mA
500 mA
-
500 mA(1)
Number of I/O bytes
(1)
(1)
8
8
8
8
Watchdog
yes
yes
-
yes
Timer
yes
yes
yes
*The board APCI-1500 is also available for the CompactPCI bus with the same technical features.
All boards are delivered including technical manual and standard driver. Connection accessories not included in the delivery.
Contact your distributor for further technical information - data sheets on Internet www.addi-data.com
yes
(1)
Limited to 3A for all outputs.
Fax us your request
I am interested in the following products:
Boards for PCI bus
Boards for ISA bus
Digital I/O
Analog I/O
Multiport, serial interface
Counter
Watchdog
Boards for CompactPCI bus
Digital I/O
Analog I/O
Multiport, serial interface
Counter
Digital I/O
Analog I/O
Multiport, serial interface
Counter
Watchdog
Price inquiry
7
I would like to receive a quotation for the following products:
Please fill in the fields in capital letters, for example:
A DD I N UM A PC I - 1 5 0 0
Product description
2
Quantity
digital I/O Board, 24 V
Short description of the product
Information
Yes,
I would like to have more information!
Send me the free product guide for PCI & ISA
"Industrial Data Acquisition,
Control and Automation"
Further information on the internet!
Visit us!
No, I am no longer interested in ADDI-DATA products,
please take my address off your mailing list.
My address:
Company
Name
First name
Our sales representative:
Department
Street
Postcode/City
Telephone
Telefax
e-mail
ADDI-DATA GmbH - Meß- und Steuerungstechnik - Dieselstraße 3 - 77833 Ottersweier - Germany
Tel.: + 49(0)7223/9493-20 - Fax: +49(0)7223/9493-92 - e-mail: info@addi-data.com - Internet: http://www.addi-data.com
Download