EDGE EV3H
3” (76.2mm)
G1/G9/GS:
3-13/16”
Project3-13/16”
Name (96.8mm)
Date
4-1/8” (104.8mm)
Catalog Number
Type
FL & FLF:
E V O L U T I O N
LED Recessed Linear with
Arched Regress Lens
CONSTRUCTION Extruded aluminum trim with formed cold rolled 20 gauge steel back box housing. Highly reflective
die-formed white painted steel reflector, .125” (3.2mm) diffuse snap-in arched acrylic lens with matte finish, removable
for maintenance.
ELECTRICAL Electronic, 120 to 277 volt input and 36V output. 0-10 volt dimming standard. Must specify 1D in circuiting
for dimming.
LED All luminaire configurations tested in accordance with IES LM-79. Diodes tested in accordance with IES LM-80.
R9≥20, 27K is CRI≥90, 30K, 35K, and 40K is CRI≥82. Minimum lifetime greater than 60,000 hours.
MOUNTING Edge is designed to install into acoustical grid and inaccessible ceilings. Specify GXG, FLF, SFS, NFN for
individual, unjoinable units (individual units will fall on-grid). Specify GX, FL, SF, NF for continuous runs (runs designed
to fall on-grid). Grid retention brackets are integral to housing. Each housing contains 4 grid retention brackets. Consult
factory for detailed installation instructions.
FINISH Standard powder-coat textured white, metallic silver, textured black, graphite or bronze painted finish, consult
factory for chip of standard paint finishes. Contact factory for additional custom color and finish options.
WARRANTY Edge LED offered with a 5-year limited warranty. Covers LED, driver and fixture.
LABELS IC Rated, UL and cUL Listed, approved for dry/damp location unless otherwise noted.
YEAR LED
WARRANTY
LFL
Convertible
LED
5-1/8”
YEAR LED
WARRANTY
LED
(130.2mm)
LFL
LED
Convertible
Convertible
LFL
Convertible
LED
LFL
3” (76.2mm)
G1/G9/GS:
3-13/16” (96.8mm)
FL & FLF:
4-1/8” (104.8mm)
L U M I N A I R E S P E C I F I C AT I O N
Sample Catalog #: EV3H-30-24’-FL-120-1C-W
EV3H-
____-
___’-
___-
___-
HOUSING
COLOR/LUMENS
LENGTH
MOUNTING
VOLTAGE
1
LFL
Convertible
Individual Units
2- 2’, 23” (584.2mm) fixture2
3- 3’, 35” (889mm) fixture2
4- 4’, 47” (1193.8mm) fixture2
5- 5’, 59” (1498.6mm) fixture2
6- 6’, 71” (1803.4mm) fixture2
8- 8’, 95” (2413mm) fixture2
Continuous Runs3
xx’- Specify row length to 1’ (304.8mm)
increments
27K Color Temperature Lumen Options
27- 27K, 266 lumens/ft (5.2 watts/ft)
27HO- 27K, 482 lumens/ft (9.9 watts/ft)
30K Color Temperature Lumen Options
30- 30K, 325 lumens/ft (5.2 watts/ft)
30HO- 30K, 587 lumens/ft (9.9 watts/ft)
35K Color Temperature Lumen Options
35- 35K, 339 lumens/ft (5.2 watts/ft)
35HO- 35K, 613 lumens/ft (9.9 watts/ft)
2
EV3H- Edge
Evolution 3,
Arched Regress
Lens
40K Color Temperature Lumen Options
40- 40K, 348 lumens/ft (5.2 watts/ft)
40HO- 40K, 629 lumens/ft (9.9 watts/ft)
Custom Output
CL_____- Specify color temp. and lumens/ft. (i.e. CL35500)
CW____- Specify color temp. and wattage/ft. (i.e. CW407.5)
(Specify lumens/watts between standard offering listed above.
Lumens are specified per color temp.)
__-
YEAR LED
WARRANTY
LED
CIRCUITING
LED
____
FINISH
OPTIONS
(130.2mm)
Convertible
1C120- 120 V
1D277- 277 V
1BUNV- UNV
3” (76.2mm)
(120-277)
G1/G9/GS: 1E3-13/16” (96.8mm)
FL & FLF:
5-1/8”
__-
LFL
Single Circuit
Single Circuit Dimming5
Single Circuit with
Battery Pack5,9
Single Circuit with
Emergency Circuit
4-1/8” (104.8mm)
Individual Units (CANNOT BE JOINED)2
Acoustical Grid Ceiling10
G1G- 1” (25.4mm) Ceiling Grid
G9G- 9/16” (14.3mm) Ceiling Grid
GBG- 9/16” (14.3mm) Ceiling Grid with Bevel Trim
GSG- Screw Slot Ceiling Grid
Inaccessible Ceiling
5-1/8”
FLF- Standard 1/2” (12.7mm) (130.2mm)
Flange
SFS- Spackle Flange
NFN- Flangeless4
Continuous Runs (JOINABLE)3
10
Acoustical Grid
3” Ceiling
(76.2mm)
G1- 1” (25.4mm) Ceiling Grid
G1/G9/GS:
G9- 9/16”3-13/16”
(14.3mm)(96.8mm)
Ceiling Grid
G9- 9/16” (14.3mm)
FL & FLF:Ceiling Grid with Bevel Trim
GS- Screw4-1/8”
Slot Ceiling
Grid
(104.8mm)
Inaccessible Ceiling
FL- Standard 1/2” (12.7mm) Flange
SF- Spackle Flange
NF- Flangeless4
W- Matte White
S- Metallic Silver
BL- Textured Black
GR- Graphite
BR- Bronze
CC- Custom Color
CPMRFLMRFPMRC-
Chicago Plenum
Fixed MR16 Halogen8
Fixed MR16 LED8
Perimeter Mount6
Rotating Crossbar7
See back page for mounting detail. 2Individual units cannot be joined. All end trims are factory installed and cannot be removed in the field. 3Continuous Rows made up of both even and odd length fixtures. Designed to fall on-grid. 4NF and NFN to be utilized for metal pan / millwork ceiling. 5Some Edge configurations will not accommodate all electrical options. Consult factory. 6Available for acoustical
grid ceilings. Wall rail painted white unless otherwise specified. 71/2” to 5/8” drywall thickness. Available for standard 1/2” flange (FL). 8Consult MR16 Resource Guide for configurations using MR16 units.
9
Integral battery packs with remote test switch are provided with 1B option. 10 See page 3 for grid retention bracket details.
1
®
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO 80239
Phone 303.322.5570
Fax 303.322.5568 www.pinnacle-ltg.com
© 2016 Pinnacle Architectural Lighting®
August 2016
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.
1Acoustical Grid Ceiling and Inaccessible Ceilings available as individual units or continuous rows. Individual units and rows are available for on-grid installation with acoustical ceilings.
EDGE EVOLUTION
EV3A, EV3AL, EV3H
INDIVIDUAL AND CONTINUOUS RUN MODULES 1
23" (584.2mm)
2'
59” (1498.6mm) or 60” (1524mm)
5'
(1) lens per 2' unit
(1) lens per 5' unit
71” (1803.4mm) or 72” (1828.8mm)
35" (889mm)
3'
6'
(1) lens per 3' unit
(1) lens per 6' unit
47” (1193.8mm) or 48” (1219.2mm)
4'
95” (2413mm) or 96” (2438.4mm)
8'
(1) lens per 4' unit
(1) lens per 8' unit
1Acoustical Grid Ceiling and Inaccessible Ceilings available as individual units or continuous rows. Individual units and rows are available for on-grid installation with acoustical ceilings.
MOUNTING DETAILS
1” Grid Mounting Options
9/16” Grid Mounting Options
Screw Slot
Mounting
1” Grid, Standard Tile: 1” Grid, Tegular Tile: 9/16” Grid, Standard Tile: 9/16” Grid, Tegular Tile: 9/16” Grid, Tegular Tile: 9/16” Grid, Tegular Tile:
Screw Slot Grid:
Use G1 or G1G in part # Use G1 or G1G in part # Use G9 or G9G in part # Use G9 or G9G in part # Use GB or GBG in part # Use GS or GSG in part # Use GS or GSG in part #
INACCESSIBLE CEILING MOUNTING
Flange Detail
Non-Flange
SPECIALTY MOUNTS
Spackle Flange
Exposed Flange Detail:
Metal Pan or Millwork:
Drywall, Flangeless Look:
Specify FL or FLF in part # Specify NF or NFN in part # Specify SF or SFS in part #
MR16 LAMP
Perimeter Mount
Rotating Crossbar
Bracket and Wall Rail:
Specify PM in part #
Unavailable Structure Support:
Specify RC in part #
APPLICATION: MR16’s are ideal for conference rooms,
corridors, wall washing, retail spaces and training facilities where accent lighting is required.
ELECTRICAL: Standard 50 watt max halogen lamp transformer (120v
or 277v), 60 watt max LED electronic transformer (120v or 277v). MR16
installed as independent circuit. MR16 voltage to match LED voltage.
TECHNICAL: MR16 fully enclosed compartment eliminates light from entering into other fixture areas. Available in 20, 35 and 50 watt halogen lamps, up to 12 watt
LED lamps (lamps not included). Consult factory for other lamp types/ wattages.
LABELS: UL and cUL Listed, approved for dry/damp location unless otherwise noted.
®
ORDERING INFORMATION:
MR16 layout guide.
MR16’s should be specified utilizing
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO 80239
Phone 303.322.5570
Fax 303.322.5568 www.pinnacle-ltg.com
© 2016 Pinnacle Architectural Lighting®
August 2016
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.
PHOTOMETRICS
EDGE EVOLUTION
Joint holes
Joint for
holes
#8-32
for #8-32
ScrewsScrews
GRID RETENTION: At every
joint, the addition of grid
retention brackets results in
a sturdy connection between
the fixtures and the grid.
Insert screws through the
bracket into the grid to
secure.
JOINT ALIGNMENT: Incorporating biscuits and screws
not only creates a secure
joint but also aids in fixture
alignment.
BiscuitBiscuit
®
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO 80239
Phone 303.322.5570
Fax 303.322.5568 www.pinnacle-ltg.com
© 2016 Pinnacle Architectural Lighting®
August 2016
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.