Manufacturer : Matrix
The MOS626F analog oscilloscopes up to 20 MHz are designed
for observation and measurement of electric signals. Observed
parameters can be measured directly on the screen or by means
of cursors. Cursors can be moved vertically and horizontally and
the result of measurement is displayed in the form of digits due
to cursor technology the voltage, time or frequency
measurement can be made quickly, repeatable and with small
error.
Features:
- dual trace
- measures voltage difference, time and frequency by means
of screen cursors
- high brightness CRT made by Toshiba with inner grid
- Japanese electronic encoder
- simultaneous observation of two independent signal
- TV triggering
- trigger level locking
- sweep expansion x10
- high sensitivity 1 mV/div
- XY mode
- Z axis input
- CH1output
- 2 oscilloscope probes
Characteristics:
Bandwidth
: 20 MHz
CRT:
Size
: 104 x 84 mm
Colour
: blue
Acceleration voltage
: 2 kV
Brightness and focus
: adjustable on front panel
(INTEN and FOCUS potentiometers)
Vertical deflection
: 5 mV ~ 5 V/div
Rise time
: 17,5 ns
Input modes
: AC, GND, DC
Operating modes
: CH1, CH2, DUAL (ALT, CHOP), ADD
Input impedance
: 1 MΩ / 25 pF
Max. input voltage
: 300 V (AC + DC peak-peak)
Horizontal deflection
Time base
: 0,2 ms/div ~ 0,5 s/div (x10MAG; 20 ns)
Accuracy
: ±3% (x10%; ±5%)
Triggering
Modes
: AUTO, NORM, TV-V, TV-H
Slope
: +/- (rising or falling)
X-Y Mode
Sensitivity
: 5 mV ~ 5 V/div.
Accuracy
: ±5%
Band
: Axis X: DC to 500 kHz
Phase shift
: ≤3° (DC ~ 50 kHz)
Calibration
Voltage
: 2 V ±2%
Source
: 1 kHz ±1,5%
Cursors
Measurement
- voltage
: DV - volt. difference between cursors
- frequency
: 1/DT - frequency measurement
- time
: DT - time. difference between cursors
Resolution
: 1/25 div.
Accessible error taking account of waveform distortion in
- vertical
: +3 div.
- horizontal
: +4 div.
Screen indicator
- vertical
: V/div.
- horizontal
: t/div., expansion x10
Supply
Voltage
: 230 V ±10% 50/60 Hz
Power consumption
: 35 W
Others
Dimensions
: 310 x 150 x 455 mm
Weight approx
: 8 kg
Standard equipment:
- 2 oscilloscope probes
- mains power cable
- manual