1
subject to change without notice

This is a complete practical laboratory that provides all the resources needed to deliver a comprehensive training programme that covers electrical machines and transformers.
We include a wide range of training kits and test equipment to enable instructors and students to perform a wide range of experiments and practical troubleshooting tasks.
The TSI eLearning content provides easy to use theory lessons include a wide variety of presentations, animations, assessments and interactive simulations for realistic experimentation.
TSI-EIT14 Electrical Safety Trainer
The Electrical Safety Demonstrator is a useful trainer that enables students to understand the basic concepts and fundamentals of many electrical safety standards. Before working with any electrical or electronic device, it is essential to learn about these electrical safety standards.
The trainer is helpful to learn, how to avoid accidents, that can happen while handling any electric or electronic device.
TSI-EMT02 DC Machine Lab (0.5HP)
The TSI DC Machines Lab has been designed for practical use in electrical laboratories. It can used to demonstrate basic concepts and functions of DC motors and generators.
The product provides hands-on experiments including: speed control, torque-speed characteristics, torquecurrent characteristics, N-I characteristics etc. With its accompanying teach ware it provides detailed practical understanding of the subject.
Features:
• Electrical Loading Arrangement
• Flexible Shaft Coupling Arrangement
• Provided with Digital Tachometer
• 2 x DC Shunt Wound Machines with Class “B”
Insulation
• Heavy Duty Base/Channel
• Terminals provided to use the optional externally
• Designed by considering all the safety standards
• Diagrammatic representation for the ease of connections
• Voltmeter and Ammeters
• Safety 4mm Interconnection Sockets
• Complete 4mm Safety Connection Lead Set
2
Design & specifications are
subject to change without notice

TSI-EMT03 Three Phase Synchronous Motor (3HP) lab
The TSI Three Phase Synchronous Motor Lab is flexible training system designed for use in for the Electrical
Laboratories. The product helps students get fully acquainted with the basic concepts, functions and operating principles of a three phase synchronous motor.
The system allows for practical experiment such as investigating the V and inverse V curve of synchronous motor. For engineering students it is important to know how the variation of field current can affect the power factor of the synchronous motor and hence improve the system's performance.
Separate terminals for each winding is brought out on a terminal box fitted on top of the motor so that students can connect them separately to the control panel and can perform experiment correspondingly. All protection circuits are in built, ensuring that there is less chance of faults or danger to user.
Features:
• 1 x Three Phase Synchronous Motor - Salient Pole :
3HP
• 1 x DC Machine - Shunt: 2HP
• Shaft Coupling Arrangement
• Centre-Tapped Wattmeter for better precision
• Equipped with supply indication lamps
• Provided with DigitalTachometer
• Machine with Class“B”Insulation
• HeavyDutyBase/Channel
• Diagrammatic representation for the ease of connections
• Safety 4mm Interconnection Sockets
• Complete 4mm Safety Connection Lead Set
TSI-EMT04 DC Series Motor Lab (1HP)
DC Machines are an important part of Electrical
Engineering Syllabus. This system plays a vital role in providing students with a basic knowledge of the operating principles of the DC machine. It provides practical knowledge and explains to students the fundamental concepts of the DC Series Machine.
This lab includes experiments such as operating characteristic and speed controlling of DC Series Machine.
Students gain an awareness of the methods through which the speed of the DC Series Motor can be controlled. The training system includes terminals for optional Rheostats and Starters so that these devices can be connected externally to the panel.
All the connections and the appearance of panel are designed in a way that helps students make connections by themselves. All the required protection circuits are in built so there is almost no chance of faults or danger to user.
Features:
• Machine with Mechanical Loading Arrangement
• Provided with Digital Tachometer
• 1 x DC Series - 1HP Machine with Class “B”
Insulation
• Heavy Duty Base/Channel
• Brake Drum/Pulley with heat suppression facility
• Equipped with supply indication lamps
• Designed by considering all the safety standards
• Diagrammatic representation for the ease of connections
3
Design & specifications are
subject to change without notice

TSI-EMT05 Single Phase Induction Motor Lab
(1HP)
This Single Phase Induction Motor Lab is designed to provide a complete practical learning resource that covers the concepts of a Single Phase
Capacitor Start Induction Motor.
Separate terminals have been provided for main winding, starting winding and capacitor so that students can understand the significance of the individual windings along with the role of the capacitor in operation of the motor in a simple hands-on way.
It covers the phenomenon of excitation, running and reversing of the motor. Students can calculate the equivalent circuit parameters and the power factor of the motor. It demonstrates the relationship between speed and torque, known as load characteristic or speed-torque characteristic of the motor.
All the connections and the appearance of panel are designed in a simple manner. Students can make connections by themselves, using the 4mm safety connection sockets and leads
Features:
• Machine with Mechanical Loading Arrangement
• Provided with Digital Tachometer
• 1 x Single Phase Capacitor Start 1HP
Machine with Class“B”Insulation
• Heavy Duty Base/Channel
• Brake Drum/Pulley with heat suppression facility
• Equipped with supply indication lamps}
Diagrammatic representation for the ease of connections
TSI-EMT06 Synchronous Machine (3 HP) Training
System
Synchronous Machines are used as generators in power plants because of their characteristic relation of speed with frequency. The TSI Synchronous Machine Training System is designed to demonstrate the fundamental concepts of parallel operation of ThreePhaseSynchronousGenerators.
This product is equipped with advanced measurement system for AC Parameters and DC Parameters. It has an integral built Phase Sequence Indicator which is highly stable and accurate. A large LCD display makes it possible to observe multiple parameters simultaneously. The microcontroller based design provides better resolution and sensitivity as compared to analog meters.
The panel is also equipped with advanced Digital
Synchroscope as well as Conventional Lamps (Dark Lamp
Method) to perform the synchronization of two generators.
Students can learn the basics as well as advanced experiments and safety conditions with precautions that are encountered while generating power with multiple generators .
Various terminals, including three phase starter terminals are provided on front panel to provide flexibility and ease of connections while performing experiments. Students can perform experiments like Synchronization of parallel generators using advanced and conventional methods, behavior of generator, load sharing, power transfer parameters, analysis of voltage regulation of generator, V curve and inverse V curve in three phase synchronous generators with a vast flexibility.
Features:
• Two Identical Motors Generator Set
• Electrical Loading Arrangement
• 240 X 128 Graphical LCD Display
• Microcontroller based design for measurement highresolution ADC for accurate measurement
• In-built Digital Phase Sequence Indicator
Equipped with Synchroscope
• Inbuilt Multifunction Meter for AC & DC
Measurement
• Phase Sequence Indicator
• Phase Sequence Indicator Generator 1:
• Phase Not in Sequence Generator 2:
• Phase in Sequence Generator 1 and 2
• Not in Sequence
• Phase Sequence Indicator - measures the phase sequence of both the generators individually. When both generators are in same phase then it indicates to proceed further.
• AC Parameters Measurement
4
Design & specifications are
subject to change without notice

TSI-EMT07 DC Compound Motor Lab (1HP)
The TSI Compound Motor Lab is a practical training system designed for Electrical laboratories to demonstrate the operation of DC compound motor. Students can understand the fundamental operating principle of DC
Compound Motor. This product includes various experiments such as No Load Test, Load Test and
Operating Characteristics of DC Compound Motor. The training system includes terminals for optional 4 point starters and rheostat so that these can be connected externally to the control panel.
Features
• 1 x Compound DC 1HP Machine with mechanical loading arrangement
• Digital Tachometer
Machine with Class “B” Insulation
• Heavy Duty Base/Channel
• Terminals provided to use the optional externally Brake-Drum/Pulley
• Diagrammatic representation for the ease of connections
TSI-EMT08 Single Phase Transformer Lab
This Single Phase Transformer Lab is an excellent training system for use in Electrical laboratories.
The product helps students to get fully acquainted with the basic concepts and functioning of a single phase transformer.
The Lab enables students to practically explore concepts like Polarity, Turns Ratio, Transformation
Ratio, Iron Loss, Copper Loss, Efficiency etc.
Features:
• Inbuilt Single Phase Variac
• Equipped with Supply Indication Lamp
• Facility to use Fixed and Variable Load
• Diagrammatic representation for the ease of connections
• Flexibility to configure Step-up, Step-down and Isolation Transformer
TSI-EMT09 Three Phase Transformer Lab
This Three Phase Transformer Lab is an adaptable training system for Electrical laboratories. The product helps students understand the basic concepts and functioning of a three phase transformer.
The product is represented in an easy way so that each test can be studied differently in proper sequence. Three Phase configurations such as Star-
Star, Star-Delta, Delta-Star and Delta-Delta,
Measurement of different losses and consequently determine efficiency and voltage regulation at any predetermined load etc.
Features:
• Standalone operation
• Graphical LCD display for high resolution
• Flexibility to use in star and delta configuration
• Equipped with Supply Indication Lamps
• Facility to display entire parameter in single shot
• Diagramma(c  Representa(on  for  the  Ease  of
5
Design & specifications are
subject to change without notice

TSI-EMT10 Scott Connection Trainer
The TSI Scott Connection Trainer is a vital training system for the Electrical Laboratories. It enables students to practically explore three Phase to two phase conversion in a very simple manner. It helps to study and analyze the operation of a teaser transformer and a main transformer.
Students can perform stand alone operations and observe the two phase step down waveforms on oscilloscope, which will have 90° phase displacement with each other.
Features
• Main and Teaser Transformer are shown separately
• Two Phase Step down Outputs for Waveform
• Observation Equipped with supply indication lamps
• Provided with bulb holder to use an external load
• Diagrammatic representation for the ease of connections
TSI-EMT11 Sumpner's Test of Two Single Phase
Transformers
The TSI Sumpner's Test of Single Phase Transformer is an important product designed for students of Electrical
Engineering. It is used to explain the basic concepts of
Sumpner's test.
With this trainer, students can learn about the significance of carrying out the heat run test with two single phase transformers and correspondingly they can determine the efficiency and voltage regulation. Additionally they will also learn the phenomenon of polarity.
Features:
• Two Identical Single Phase Transformer
Inbuilt Single Phase Variac
• Microcontroller based LCD to display variation in temperature
• Equipped with supply indication lamps
• Diagrammatic representation for the ease of connections
TSI-EMT12 Parallel Operation of Two Single
Phase Transformers Trainer
This Parallel Operation of Two Single Phase
Transformer trainer has been exclusively designed to demonstrate the fundamental concepts of parallel connections of two or more single phase transformers.
The user can load the transformer more than the rating of the individual transformer to analyze
Parallel operation phenomenon. Students can learn about the significance of connecting the two transformers in parallel and its effect on the system. Additionally, they can also learn the polarity in the transformers.
Features:
• Two Identical Single Phase Transformer
• Facility to use Fixed and Variable Load
• Equipped with supply indication lamp
• Diagrammatic representation for the ease of connections
6
Design & specifications are
subject to change without notice

TSI-EMT60 TSI Test Equipment Package for
Electrical Machines and Transformers
This is a complete package of test equipment that will cover all the test and measurement requirements in the lab. It includes the type of test equipment that students will use in the workplace.
• 1 x Digital Multimeter
• 1 x Analog Multimeter
• 1 x Digital Storage Oscilloscope 60Mhz
• 1 x 3MZ Function Generator
• 1 x Power Quality Meter
• 1 x True RMS Watt Meter
• 1 x Power Factor Meter
TSI-MID01 Interactive Display + Mobile Stand
Full HD LED-backlit display with touch functionality. The Anti
Glare coating is used in professional-grade displays to help avoid issues with reflections and external light sources affecting colour reproduction, contrast and sharpness. It also makes the screen less susceptible to dust, grease and dirt marks. The display supports PIP, a video-wall function and incorporates a wide range of video and audio inputs which ensures compatibility with multiple platforms.
TSI-LPBW Laser Printer (Black & White)
High quality black and white print laser printer from recognised manufacturers.
TSI-LTPC Windows Laptop
High quality windows laptop from recognised manufacturers.
TSI-SWD01 Student Workstation
Welded H-frame lab tables are ideal for use throughout the education sector where you need extra strength, stability or height 1.5mm gauge,
25mm square tube steel H-frame with T-bar for added strength. Polished edge or 2mm PVC edge to seal and protect the table edges from damage and wear. Instructor station has drawer set
TSI-IWD01 Instructor Workstation
Designed specifically for the education sector. Easy clean
18mm Beech laminate. MDF bullnose edge. Sturdy crush bent steel frame in Metallic Charcoal complete with lockable two drawer pedestal Finished with black drawer handles
TSI-SC01 Student Chair
Designed especially for the education sector and manufactured in the UK. Fully compliant with BS EN1729
Parts 1 & 2. One piece wipe clean high grade polypropylene shell Moulded back rest promotes good posture. Easy to maintain and keep clean. Black epoxy coated steel frame with anti-slip feet.
TSI-IC01 Instructor Chair
Designed specifically for easy movement Ideal for teaching students in the classroom. Highly stable fixed and upholstered back for added comfort .
Fully upholstered with a comfortable seat and back cushion . Mounted on 5 castors for great manoeuvrability Simple gas height adjustment for flexibility.
7
Design & specifications are
subject to change without notice

8