Audio Signal Generator Board

advertisement

Audio Signal Generator Board

BKPF-L754

The BKPF-L754 is an audio signal generator board that has a dual audio signal generator. Each signal generator can be selected between 1 kHz and 440 Hz (440 Hz or 400 Hz is selectable) via GPI or the on-board switch. Three outputs of each of these two signals are provided. Normally the left and right channels carry the same frequency, but they can be switched to carry different frequencies.

The BKPF-L754 is especially of use as an audio identification for video sources, or as a centralized tone source.

BKPF-L Series function boards can be installed into PFV-L

Series Interface Units in any combination.

D i g i t a l

P r o c e s s i n g

E q u i p m e n t

Audio Signal Generator Board

BKPF-L754

Features

• Provides two channels of test signals

• Independent frequency setting of both signals to either 1 kHz and 440 Hz (440

Hz or 400 Hz is selectable) via GPI or the on-board switch

• Three outputs of each test signal

Specifications

General

Power requirements

Dimensions

Mass

+5 V DC: 0.5 A

Main board: 267 x 77 mm (w x h)

(10 5/8 x 3 1/8 inches)

Connector board: 33 x 85 mm (w x h)

(1 5/16 x 3 3/8 inches)

Main board: 140 g (5 oz)

Connector board: 100 g (4 oz)

Inputs/outputs

Audio output

(including remote)

OUT and CONT connectors:

Phoenix type 15-pin connector x 2

(6 channels—3 stereo pair and 1 GPI)

Video characteristics

Output frequency

Distortion

Output level

Supplied Accessories

Operational manual x 1

Installation manual x 1

Optional Accessories

PFV-L10 Interface Unit

BKPF-LPS10 Backup Power Supply Unit

Extension Board

RMM-10 Rack Mount Kit

Maintenance Manual

400 Hz/440 Hz/1 kHz ±10 %

Less than 0.01%

FIX: 0/+4/+8 dBm ±0.1 dB (600 Ω loaded)

VARIABLE: -2 to +10 dBm (600

Ω loaded)

D i g i t a l

P r o c e s s i n g

E q u i p m e n t

• Output level adjustment (selectable with the on-board switch)

FIX: 0/+4/+8 dBm ± 0.1 dB

VARIABLE: -2 to +10 dBm

• ±12 V internal power status lamp

BKPF-L754 Connector Panel

◆ BKPF-L754 Functional Block Diagram

440 or

400 Hz

SG

1 kHz

SG

ATT

ATT

ANALOG AUDIO OUT 1-1

ANALOG AUDIO OUT 1-2

ANALOG AUDIO OUT 1-3

ANALOG AUDIO OUT 2-1

ANALOG AUDIO OUT 2-2

ANALOG AUDIO OUT 2-3

©1999 Sony Corporation. All rights reserved.

Reproduction in whole or part without written permission is prohibited.

All non-metric weights and measurements are approximate.

Features and specifications subject to change without notice.

Sony is a trademark of Sony Corporation.

All other trademarks are the property of their respective owner.

Distributed by

Printed in Japan

MK7262V1TC99MAR

Download