A-Line contactors
A145 – A300
AC 1035
S
TO
M ER FI
R
CU
ST
IT Y
YS
!
QU
AL
... A LW
A
Registered by UL to
ISO 9002
ABB Control Inc.
General information
A-Line contactors
A145 – A300
General information
• Table of contents ............................................... II
Accessories .......................................................... 5 - 7
AC 1035 — 10/1999
Table of contents: pg 2
ABB Control Inc.
Alphanumeric: pg 3
Approximate dimensions .................................. 10 - 13
Dimensions
Terms & Standard compliance & approvals ..... 15 - 16
Terms
Technical data ...................................................... 8 - 9
Technical data
Pricing and selection, A145-A300 ............................. 4
Accessories
A145 - A300
• Alphanumeric price guide .......................... III – IV
This catalog is published for information purposes only and is not all inclusive. For additional information on products or technical
information, consult ABB Control Inc. The installation and use of ABB Control Inc. products should be in accordance with the
provisions of the U.S. National Electrical Code and/or other local codes or industry standards that are pertinent to the particular
end use.
Installation
with
these
standards
to personnel
and/orpgs
equipment.
Selection:
pg or
4 use not in accordance
Accessories:
pgs
5 – 7codes andTech
data: could
pgs 8be– hazardous
9
Dimensions:
10 – 13
1
Table of contents
Subject
Product category
Page no.
Subject
Product category
Page no.
O
AC operated contactor coil .................................................................................. 7
Across the line contactors .................................................................................... 4
Adapter plates ...................................................................................................... 7
Approximate dimensions ............................................................................... 10-13
Auxiliary contact blocks ....................................................................................... 5
Overload relay mounting kits, T450 ..................................................................... 5
Overload relays .................................................................................................... 5
R
Relays, overload .................................................................................................. 5
S
C
Cable connectors .................................................................................................
Connection bars ...................................................................................................
Connection strips ............................................................................................. 6,
Connectors, cable ................................................................................................
Contact blocks, auxiliary ......................................................................................
Contact sets, main ...............................................................................................
Contactor coil, AC operated .................................................................................
6
6
7
6
5
7
7
Contactors, across the line .................................................................................. 4
D
De-ionizing plates ................................................................................................. 7
Self tapping mounting screws .............................................................................. 7
Standard compliance & approvals ..................................................................... 16
Surge suppressors ............................................................................................... 5
T
T450 overload relay mounting kits ...................................................................... 5
TA200 terminal shroud ......................................................................................... 5
Technical data ................................................................................................... 8-9
Terminal enlargements ........................................................................................ 7
Terminal extensions ............................................................................................. 7
Terminal shroud fro TA200 .................................................................................. 5
Terms & conditions ............................................................................................ 15
M
Main contact sets ................................................................................................. 7
Mechanical interlocks ........................................................................................... 5
Mounting kits, T450 overload relay ..................................................................... 5
Mounting screws, self tapping ............................................................................. 7
Table of contents: pg 2
2
Alphanumeric: pg 3
Selection: pg 4
Accessories: pgs 5 – 7
Tech data: pgs 8 – 9
Dimensions: pgs 10 – 13
ABB Control Inc.
AC 1035 — 10/1999
General information
A
Availability code legend
Alphanumeric price guide
1SFN110401R1000 to ZW300
Catalog price information
Alphanumeric reference
List prices shown in this publication supersede all previously
published documentation and are subject to change without
notice.
This above alphanumeric reference is an extract of AC 5030,
Alphanumeric Reference, which contains all products sold by
ABB Control Inc.
AC 5030 is available on disk for Windows and Macintosh as a
MicroSoft Excel 5.0 document. An ASCII text version of the
data is also included for use in other spreadsheet and database applications.
Catalog
number
Catalog
number
List
price
$180.00
$150.00
$180.00
$300.00
$420.00
ABA
ABA
ABA
ABA
ABA
A
A
A
A
A
5
7
7
7
7
List
price
Disc. Avail. Pg.
sched. code no.
Catalog
number
List
price
Disc. Avail. Pg.
sched. code no.
$10.00
$10.00
$90.00
$10.00
$10.00
ABA
ABA
ABA
ABA
ABA
A
A
A
A
A
6
6
5
6
6
VM300V
ZA185
ZA300
ZL145
ZL185
ZL210
ZL260
ZL300
ZW185
$525.00
$855.00
$1,020.00
$130.00
ABA
ABA
ABA
ABA
A
A
A
A
7
7
7
7
ZW300
$180.00
ABA
A
7
1SFN110401R1000 $10.00
A145-30-00-84
$785.00
A145-30-11-84
$825.00
A145-30-22-84
$865.00
A185-30-00-84
$1,250.00
ABA
AEA
AEA
AEA
AEA
A
A
A
A
A
7
4
4
4
4
LT185-AC
LT185-AL
LT200A185
LT300-AC
LT300-AL
A185-30-11-84
A185-30-22-84
A210-30-00-84
A210-30-11-84
A210-30-22-84
$1,290.00
$1,330.00
$1,595.00
$1,635.00
$1,695.00
AEA
AEA
AEA
AEA
AEA
A
A
A
A
A
4
4
4
4
4
LW185
LW300
LX185
LX300
LYA185
$120.00
$130.00
$90.00
$140.00
$90.00
ABA
ABA
ABA
ABA
ABA
A
A
A
A
A
7
7
7
7
7
A260-30-00-84
A260-30-11-84
A260-30-22-84
A300-30-00-84
A300-30-11-84
$1,775.00
$1,815.00
$1,855.00
$1,835.00
$1,875.00
AEA
AEA
AEA
AEA
AEA
A
A
A
A
A
4
4
4
4
4
LYA300
PR145-1
PR210-1
PR300-1
RC5-2/133
$140.00
$20.00
$20.00
$20.00
$30.00
ABA
ABA
ABA
ABA
ABA
A
A
A
A
A
7
7
7
7
5
A300-30-22-84
ATK185
ATK300
ATK300/2
BEA185/S3/S4
$1,915.00
$45.00
$68.00
$110.00
$60.00
AEA
ABA
ABA
ABA
ABA
A
A
A
A
A
4
6
6
6
6
RC5-2/250
RC5-2/440
RC5-2/50
TA200DU110
TA200DU135
$30.00
$30.00
$30.00
$165.00
$225.00
ABA
ABA
ABA
TC
TC
A
A
A
A
A
5
5
5
5
5
BEA300/S5
BED145A
BED185
BED210
BED300
$75.00
$250.00
$290.00
$375.00
$500.00
ABA
ABA
ABA
ABA
ABA
A
A
A
A
A
6
6
6
6
6
TA200DU150
TA200DU175
TA200DU200
TA200DU90
TA450DU185
$225.00
$225.00
$225.00
$165.00
$488.00
TC
TC
TC
TC
TCT
A
A
A
A
A
5
5
5
5
5
BEMA185-30
BEMA300-30
BESA185-30
BESA300-30
CAL5-11
$260.00
$470.00
$130.00
$200.00
$30.00
ABA
ABA
ABA
ABA
ABA
A
A
A
A
A
6
6
6
6
5
TA450DU235
TA450DU310
TA450SU105
TA450SU140
TA450SU185
$488.00
$488.00
$525.00
$525.00
$713.00
TCT
TCT
TCT
TCT
TCT
A
A
A
A
A
5
5
5
5
5
CAL5-11B
DT450/A185
DT450/A300
LP185
LP300
$30.00
$225.00
$225.00
$20.00
$30.00
ABA
ABA
ABA
ABA
ABA
A
A
A
A
A
5
5
5
6
6
TA450SU235
TA450SU310
TA450SU60
TA450SU80
VM300H
$713.00
$713.00
$525.00
$525.00
$110.00
TCT
TCT
TCT
TCT
ABA
A
A
A
A
A
5
5
5
5
5
AC 1035 — 10/1999
Table of contents: pg 2
ABB Control Inc.
Alphanumeric: pg 3
Selection: pg 4
Accessories: pgs 5 – 7
Disc. Avail. Pg.
sched. code no.
Catalog
number
Tech data: pgs 8 – 9
List
price
Disc. Avail. Pg.
sched. code no.
Dimensions: pgs 10 – 13
3
General information
A – Stock to 2 weeks
B – 1 to 2 weeks
C – 2 to 4 weeks
D – 4 to 6 weeks
E – Call for delivery
NA – Not available, consult factory
Across the line contactors
A145 – A300
A145-30-11
UL
general purpose
current
A300-30-11
Standard
auxiliary contacts
Maximum motor horsepower ratings
200 – 208VAC
220 – 240VAC
440 – 480VAC
AC operated
550 – 600VAC
N.O.
N.C.
Catalog
number
List
price
UL rated
40
50
100
125
0
1
2
0
1
2
A145-30-00-84
A145-30-11-84
A145-30-22-84
$ 785
825
865
250
50
60
125
150
0
1
2
0
1
2
A185-30-00-84
A185-30-11-84
A185-30-22-84
1250
1290
1330
300
60
75
150
200
0
1
2
0
1
2
A210-30-00-84
A210-30-11-84
A210-30-22-84
1595
1635
1695
350
75
100
200
250
0
1
2
0
1
2
A260-30-00-84
A260-30-11-84
A260-30-22-84
1775
1815
1855
400
100
100
250
300
0
1
2
0
1
2
A300-30-00-84
A300-30-11-84
A300-30-22-84
1835
1875
1915
Coil voltage selection
Coil voltage selection chart
All catalog numbers include a 120VAC coil. To select other coil voltages,
substitute the code from the "Coil voltage selection" chart for the two digits after
the last dash in the catalog number.
Ex.: A 240V coil is required for an A145-30-11 contactor: A145-30-11-80
Table of contents: pg 2
4
Alphanumeric: pg 3
Selection: pg 4
Hz
60
50
Cntr
type 12
A
A
24
81
81
Volts
48 110 120 125 208 220 240 277 380 415 440 480 500 600
83 84 84
34 75 80 42
86 86 51 53 55
83 84
80
85 86
55
Accessories: pgs 5 – 7
Discount schedule AEA
Tech data: pgs 8 – 9
Dimensions: pgs 10 – 13
ABB Control Inc.
AC 1035 — 10/1999
A145 - A300
230
Accessories
Overload relays
For
contactor
Setting range
A
Normal starting time class 10
65 – 90
80 – 110
A145 – A185
Long starting time class 30
$ 165
135
150
175
200
TA200DU135
TA200DU150
TA200DU175
TA200DU200
225
130 – 185
165 – 235
220 – 310
TA450DU185
TA450DU235
TA450DU310
488
40
55
70
95
A145 – A300
TA450DU/SU
List
price
TA200DU90
TA200DU110
100
110
130
150
Normal starting time class 10
A210 – A300
Catalog
number
–
–
–
–
–
–
–
–
60
80
105
140
TA450SU60
TA450SU80
TA450SU105
TA450SU140
130 – 185
165 – 235
220 – 310
TA450SU185
TA450SU235
TA450SU310
525
713
Mounting kits for T450 overload relays
Catalog
number
For contactor
A145 – A185
A260 – A300
DT450/A185
DT450/A300
List
price
$ 225
Terminal shroud for TA200
A145 – A185
CAL5-11
LT200A185
List
price
$ 90
Accessories
Catalog
number
For contactor
Auxiliary contact block
Catalog
number
Description
First block: left and right, 1 N.O. & 1 N.C., for contactors A145 – A300
Second block: second left and right, 1 N.O. & 1 N.C., for contactors A145 – A300
CAL5-11
CAL5-11B
List
price
$ 30
Mechanical interlock for horizontal mounted contactors — for left and right contactor
Catalog
number
For contactor
A110 – A300
VM300H
List
price
$ 110
VM300
Mechanical interlock for vertical mounted contactors
Catalog
number
For contactor
A110 – A300
VM300V
List
price
$ 180
Surge supressors, type RC — for contactors A145 – A300
Catalog
number
Voltage AC
24
50
110
250
–
–
–
–
50
133
250
440
RC5-2/50
RC5-2/133
RC5-2/250
RC5-2/440
List
price
$ 30
RC5-2___
AC 1035 — 10/1999
Table of contents: pg 2
ABB Control Inc.
Alphanumeric: pg 3
Selection: pg 4
Accessories: pgs 5 – 7
Tech data: pgs 8 – 9
Discount schedule ABA – Accessories
Discount schedule TC – TA200 OLR
Discount schedule TCT – TA450 OLR
Dimensions: pgs 10 – 13
5
Accessories
Cable connectors for Al and Cu cables — set of three
Wire
range
For
contactor
6 – 250MCM
4 – 400MCM
(2) 4 – 500MCM
A145 – A185
A210 – A300
A210 – A300
Catalog
number
ATK185
ATK300
ATK300/2
List
price
$ 45
68
110
Terminal shrouds — two pieces
Catalog
number
For contactor
LT185-AC
A145
A145
A210
A210
–
–
–
–
A185
A185
A300
A300
for
for
for
for
cable connectors
compression lugs
cable connectors
compression lugs
LT185-AC
LT185-AL
LT300-AC
LT300-AL
List
price
$ 10
Connection bars for reversing contactors — six bars
Catalog
number
For contactor
LT185-AL
A145 – A185
A210 – A300
BEMA185-30
BEMA300-30
List
price
$ 260
470
Connection bars for phase to phase — three bars
Catalog
number
For contactor
List
price
BEM185-30
A145 – A185
A210 – A300
BESA185-30
BESA300-30
$ 130
200
Accessories
Connection bars between contactor and MCCB — three bars
BEA185/S3/S4
Wire range
For contactor
S3 – S4
S5
A145 – A185
A210 – A300
Catalog
number
BEA185/S3/S4
BEA300/S5
List
price
$ 60
75
Connection bars for star-delta starters — seven bars
Contactors line and delta
Star
A145
A185
A210
A260
A300
A110
A145
A185
A210
A210
Catalog
number
BED145
BED185
BED210
BED300
BED300
List
price
$ 250
290
375
500
500
LP185
Connection strips 2 pole — two pieces
Catalog
number
A145 – A185
A210 – A300
Table of contents: pg 2
6
Alphanumeric: pg 3
Selection: pg 4
Accessories: pgs 5 – 7
Discount schedule ABA
LP185
LP300
Tech data: pgs 8 – 9
List
price
$ 20
30
Dimensions: pgs 10 – 13
ABB Control Inc.
AC 1035 — 10/1999
For contactor
Accessories
Connection strips — 3 pole
Catalog
number
For contactor
A145 – A185
A260 – A300
LYA185
LYA300A
List
price
$ 90
140
Terminal extensions — 3 pole device
Catalog
number
For contactor
LY185
A145 – A185
A260 – A300
LX185
LX300
List
price
$ 90
140
Terminal enlargements — 3 pole device, same width as EH terminals
Catalog
number
For contactor
A145 – A185
A210 – A300
LW185
LW300
List
price
$ 120
130
Main contact sets
LX185
Catalog
number
For contactor
A145
A185
A210
A260
A300
$ 300
420
525
855
1020
De-ionizing plates — six pieces
Catalog
number
For contactor
A145 – A185
A210 – A300
ZW185
ZW300
Accessories
ZL145
ZL145
ZL185
ZL210
ZL260
ZL300
List
price
List
price
$ 130
180
AC operated contactor coil
Catalog
number
For contactor
A145 – A185
A210 – A300
ZW185
ZA185
ZA300
List
price
$ 150
180
Note: for coil code see page 4
Adapter plates — to replace EH contactors
Catalog
number
For contactor
Replace EH100 or EH145 with A145
Replace EH150 – EH210 with A185 – A210
Replace EH250 – EH300 with A260 – A300
ZA185
PR145-1
PR210-1
PR300-1
List
price
$ 20
Self tapping mounting screw (M5 x 70, set of 100)1
Catalog
number
For contactor
A145 – A300
1SFN110401R1000
List
price
$ 10
AC 1035 — 10/1999
PR145-1
1 Four mounting screws (not self-tapping) M5 x 70) come with the contactor
Table of contents: pg 2
ABB Control Inc.
Alphanumeric: pg 3
Selection: pg 4
Accessories: pgs 5 – 7
Discount schedule ABA
Tech data: pgs 8 – 9
Dimensions: pgs 10 – 13
7
Technical data
Type
NEMA ratings
NEMA size
NEMA cont. amp rating (thermal)
NEMA max. HP rating (3PH)
UL / CSA data
Continuous ampere rating
Motor rating 3-phase
208V
240V
460/480V
575/600V
A145
A185
A210
A260
A300
200V
230V
460V/575V
4
135
40
50
100
—
—
—
—
—
—
—
—
—
—
5
270
75
100
200
—
—
—
—
—
A
HP
HP
HP
HP
230
40
50
100
125
250
50
60
125
150
300
60
75
150
200
350
75
100
200
250
400
100
100
250
300
Insulation characteristics
Rated insulation voltage Ui
according to IEC 947-4-1 and VDE 0110 (Gr. C)
according to UL/CSA
V
V
1000
600
Rated impulse withstand voltage Uimp.
8 kV
Main pole utilization characteristics
Rated operational voltage Ue
V
Conventional free-air thermal current Ith
acc. to IEC 947-4-1, open contactors
with conductor cross-sectional area
q ≤ 40°C
A
mm2
1000
250
120
275
150
350
185
400
240
450
300
275
250
180
150
350
300
240
185
400
350
290
240
450
400
325
300
Rated operational current Ie/AC-1 for air temperature
close to contactor
q ≤ 40°C
q ≤ 55°C
q ≤ 70°C
with conductor cross-sectional area
mm2
250
230
180
120
Utilization category AC-3 for air temperature
close to contactor max. 55°C
Rated operational current Ie/AC-3
220 – 230 – 240 V
3-phase motors
380 – 400 V
415 V
M
440 V
500 V
3
690 V
A
A
A
A
A
A
145
145
145
145
145
120
185
185
185
185
170
170
210
210
210
210
210
210
260
260
260
240
240
220
305
305
300
280
280
280
kW
kW
kW
kW
kW
kW
45
75
75
75
90
110
55
90
90
90
110
132
59
110
110
110
132
160
80
140
140
140
180
200
90
160
160
160
200
250
cycles/h
cycles/h
cycles/h
cycles/h
3600
300
300
150
3600
300
300
150
3600
300
300
150
3600
300
300
150
3600
300
300
150
{
A
A
A
Rated operational power AC-3
M
3
220 – 230 – 240 V
380 – 400 V
415 V
440 V
500 V
690 V
Max. mechanical switching frequency
Max. electrical switching
for AC-1
frequency
for AC-3
for AC-4
12 x Ie AC-3
8 x Ie AC-3
Rated making capacity AC-3
Rated breaking capacity AC-3
Short-circuit protection for contactors
without thermal O/L relays – Motor protection excluded
Ue ≤ 500 V a.c. – gG (gl) type fuses
A
315
355
400
500
500
Rated short-time withstand current Icw
at 40°C ambient temp., in free air,
from a cold state
1s
10 s
30 s
1 min
15 min
A
A
A
A
A
1800
1200
800
600
280
2000
1500
1000
800
320
2500
1700
1200
1000
400
3500
2400
1500
1100
500
3500
2400
1500
1100
500
Heat dissipation per pole
Ie/AC-1
Ie/AC-3
W
W
13
5
16
8
18
9
25
14
32
18
400 / 85
400 / 35
400J / 200
400 / 85
400 / 35
400J / 200
800 / 85
800 / 35
600J / 200
800 / 85
800 / 35
600J / 200
800 / 85
800 / 35
600J / 200
Maximum short circuit rating, UL/CSA
MCP
MCP
Fuse
Table of contents: pg 2
8
Alphanumeric: pg 3
Amps/kA @ 480V
Amps/kA @ 600V
Amps/kA @ 600V
Selection: pg 4
Accessories: pgs 5 – 7
Tech data: pgs 8 – 9
Dimensions: pgs 10 – 13
ABB Control Inc.
AC 1035 — 10/1999
Technical data
1500 rpm – 50Hz
1800rpm – 60Hz
3-phase motors
Technical data
Magnet system characteristics
Type
A 145
A 185
Coil operating limits acc. to IEC 947-4-1: 0.85 – 1.1 x Uc
Drop-out voltage in % of Uc
Coil consumption
Average pull-in value
Average holding value
A 210
A 260
A 300
max 70°C
roughly 45 – 65 %
50 Hz
60 Hz
50/60 Hz
VA
VA
VA/VA
550
600
700/650
550
600
700/650
1350
1550
1700/1550
1350
1550
1700/1550
1350
1550
1700/1550
50 Hz
60 Hz
50/60 Hz
VA/W
VA/W
VA/W
35/11
40/12
44/13
35/11
40/12
44/13
60/16
65/19
80/21
60/16
65/19
80/21
60/16
65/19
80/21
at 50 Hz
at 60 Hz
V
V
24 – 690
24 – 600
24 – 690
24 – 600
24 – 690
24 – 600
24 – 690
24 – 600
24 – 690
24 – 600
Between coil energization and:
N.O. contact closing
ms
N.C. contact opening
ms
13 – 27
8 – 22
13 – 27
8 – 22
17 – 35
12 – 30
17 – 35
12 – 30
17 – 35
12 – 30
Between coil de-energization and:
N.O. contact opening
ms
N.C. contact closing
ms
5 – 10
9 – 13
5 – 10
9 – 13
7 – 13
10 – 16
7 – 13
10 – 16
7 – 13
10 – 16
7.10
9.11
7.10
9.11
13.0
17.67
13.0
17.67
13.0
17.67
Rated control circuit voltage Uc
Operating time
Approximate weight
Contactor
Starter
Technical data
lbs
lbs
AC 1035 — 10/1999
Table of contents: pg 2
ABB Control Inc.
Alphanumeric: pg 3
Selection: pg 4
Accessories: pgs 5 – 7
Tech data: pgs 8 – 9
Dimensions: pgs 10 – 13
9
Approximate dimensions
A145 - A300 contactors
00.00
Inches
00.00
Millimeters
A145, A185
4.39
111.5
4.13
105
6.30
150
Ø 0.32
1.38
0.19
8.2
35
5
1.40
35.5
DRILL & TAP 10-24
( TYP 4 )
7.36
7.72
8.94
196
187
6.50
227
165
0.69
1.38
17.5
35
A210, A260, A300
5.51
7.11
140
1.72
43.75
180
Ø 0.40
0.19
10.2
5
1.40
35.5
DRILL & TAP 10-24
( TYP 4 )
307.5
8.62
7.36
219
187
227
Dimensions
Table of contents: pg 2
10
0.69
1.72
17.5
43.75
Alphanumeric: pg 3
Selection: pg 4
Accessories: pgs 5 – 7
Tech data: pgs 8 – 9
Dimensions: pgs 10 – 13
ABB Control Inc.
AC 1035 — 10/1999
12.11
8.94
00.00
Inches
00.00
Millimeters
Approximate dimensions
A145 & A185 mechanically interlocked contactors
A145, A185 with mechanical interlock
9.97
6.60
0.40
253
168
10
0.19
1.72
5
44
9.17
4.99
233
0.42
r = 0.156
4
127
11
Ø 0.312
r = 0.250
8
6
7.36
9.60
187
244
6.50
165
8.94
227
Ø 0.312
8
1.38
5.31
35
135
A210, A260, A300 with mechanical interlock
13.00
0.40
7.39
330
12.2
10
26
310
6.5
0.19
5
1.72
165
44
r = 0.156
4
r = 0.250 Ø 0.312
8
6
12.11
187
8.62
330
10
7.36
307.5
13.00
0.40
219
Ø 0.312
8
6.69
44
Dimensions
170
1.72
AC 1035 — 10/1999
Table of contents: pg 2
ABB Control Inc.
Alphanumeric: pg 3
Selection: pg 4
Accessories: pgs 5 – 7
Tech data: pgs 8 – 9
Dimensions: pgs 10 – 13
11
Approximate dimensions
A145 & A185 starters
A145 – A185 + TA200
0.47
12
0.19
5
Inches
00.00
Millimeters
4.39
111.5
0.73
4.13
6.30
150
00.00
18.5
105
1.40
35.5
1.38
1.38
35
35
0.26
0.69
1.38
6.5
Ø 0.32
17.5
35
8.2
6.49
165
7.36
187
7.36
7.71
12.99
187
196
330
6.50
165
12.16
309
12.34
313.5
For
M5
4.84
123
1.04
26.5
3.22
Ø 0.32
82.0
8.2
0.24
6
0.43
11.0
1.46
37.0
1.97
0.55
0.15
4
For
M5
50.0
14.0
0.79
20.0
2.44
1.65
1.65
62
42
42
4.96
126
A145 – A185 + TA450SU
0.47
4.39
12
111.5
0.73
4.13
6.30
150
0.19
5
18.5
105
1.40
35.5
1.38
1.38
35
35
0.26
6.5
Ø 0.32
8.2
1.38
0.69
35
17.5
6.49
165
7.36
187
7.71
196
196
7.36
187
14.49
6.50
368
165
12.87
327
13.05
For
M5
331.5
Dimensions
6.48
164.5
0.80
0.80
20.5
20.5
2.02
51.5
2.17
55.0
0.12
0.39
2 4 6
3
10.0
0.24
For
M5
6
1.81
5
1.73
46
2.28
2.28
173
58
76.0
For
M5
0.69
44
6.81
2.99
7.60
17.5
58
193
Table of contents: pg 2
12
Alphanumeric: pg 3
Selection: pg 4
Accessories: pgs 5 – 7
Tech data: pgs 8 – 9
Dimensions: pgs 10 – 13
ABB Control Inc.
AC 1035 — 10/1999
0.19
00.00
Inches
00.00
Millimeters
Approximate dimensions
A210 - A300 starters
A210 – A300 + TA450DU/SU
0.47
5
12
140
180.5
0.19
0.47
5.51
12
7.10
1.72
1.72
43.75
43.75
0.69
1.72
1.40
17.5
43.75
Ø
0.40
35.5
10.2
For
M5
7.36
187
8.62
219
8.94
227
15.81
7.36
187
402
14.17
360
14.29
363
0.55
14
7.38
187.5
0.63
0.63
16.1
16.1
2.50
63.5
0.11
3
2.17
55
2 4 6
0.23
Ø
0.32
For M5
3.00
8.2
0.55
6
76
14
0.19
5
1.73
1.81
44
46
For
M5
0.79
2.29
2.29
20
58
58
7.59
6.81
193
Dimensions
173
AC 1035 — 10/1999
Table of contents: pg 2
ABB Control Inc.
Alphanumeric: pg 3
Selection: pg 4
Accessories: pgs 5 – 7
Tech data: pgs 8 – 9
Dimensions: pgs 10 – 13
13
Notes
00.00
Inches
00.00
Millimeters
14
Alphanumeric: pg 3
Selection: pg 4
Accessories: pgs 5 – 7
Tech data: pgs 8 – 9
Dimensions: pgs 10 – 13
ABB Control Inc.
AC 1035 — 10/1999
Dimensions
Table of contents: pg 2
Terms & conditions
Prices
Prices are subject to change without notice. Prices will be the prices in effect at the time of
shipment by ABB Control Inc. and include freight, prepaid and allowed to first destination in the
continental United States. In the event of a price change, the effective date of the change will be
the date shown on the new price discount sheets. However, where a price change is made by
letter or telegram, the effective date will be given as part of the announcement.
Taxes
The price does not include any Federal, state or local property, license, privilege, sales, use,
excise, gross receipts or other like taxes which may now or hereafter be applicable. Payment by
ABB Control Inc. of any such taxes shall be for the account of purchaser.
Standard Terms of Payment
Standard terms of payment are according to the appropriate discount schedule (AC 5000 - AC
5002).
Payment and Late Charges
ABB Control Inc. may require full or partial payment in advance if, in its sole judgement, the
financial condition of the purchaser, at any time prior to delivery, does not merit the terms of
payment specified.
If shipments are delayed by the purchaser or by reason of any of the causes referred to in the
paragraph entitled "Excusable Delay", payments shall become due from the date when ABB
Control Inc. is prepared to make shipment. Products held for the purchaser as a result of such
delay shall be at the risk and expense of the purchaser.
If the purchaser fails to pay any invoice when due, ABB Control Inc. may defer deliveries under
this or any other contract with purchaser, except upon prior receipt of satisfactory security for
or cash in payment of any such invoice. Failure on the part of purchaser to pay invoices when
due shall at the option of
ABB Control Inc. constitute a default under this contract.
A service charge, the lesser of the highest rate allowed by law or 11/2% per month, or fraction
thereof, for a maximum charge of 18% per annum will be charged on all overdue accounts.
Delivery
Delivery of products shall be FOB point of shipment regardless of transportation costs being
"allowed", "prepaid" or collect". Where the scheduled delivery of products and parts is delayed by
the purchaser or by reason of any of the causes referred to in the paragraph entitled Excusable
Delay, ABB Control Inc. may deliver such products by moving them to storage for the account of
and at the risk of the purchaser. Shipping dates are approximate and are based upon prompt
receipt of all necessary information from purchaser. ABB Control Inc. reserves the right to make
delivery in installments.
Purchaser Pick-up
No allowance will be made in lieu of transportation charges if the purchaser accepts shipment at
the factory, warehouse or freight station. Transportation charges will not be deducted from the
purchase price.
Origin, Method of Shipment and Routing
ABB Control Inc. shall determine the point of origin of shipment, the method of transportation and
the routing of shipment. Costs for shipment by means requested by purchaser different from ABB
Control Inc.'s standard means of shipment are invoiced to the purchaser as a separate charge.
Freight charges will be added to the price of any order under $100.
Excusable Delay
ABB Control Inc. shall not be liable for loss, damage, detention or delay, nor be deemed to be in
default from causes beyond its reasonable control, including without limitation, fire, flood, strike or
other labor difficulty, act or omission of any governmental authority or of the purchaser,
insurrection or riot, embargo, delays or shortage in transportation or inability to obtain necessary
labor, materials or manufacturing facilities from usual sources.
In the event of delay in performance due to any such cause, the date of delivery will be
postponed by such length of time as may be reasonably necessary to compensate for the delay.
Warranty
ABB Control Inc. warrants that on date of shipment to purchaser, the goods will be the kind and
quality described herein, merchantable and free of defects in workmanship and material.
If within one year from date of initial operation, but not more than eighteen months from date of
shipment, should any failure to conform with this warranty appear within such time, ABB Control
Inc. shall, if given prompt notice by purchaser, correct such nonconformity, at its option, either by
repair or replacement F.O.B. repair facility or by refund of the purchase price of the
nonconforming product or part. Return of products to ABB Control Inc. pursuant to this paragraph
shall be at purchaser's risk and expense. The foregoing warranty is exclusive and in lieu of all
other warranties of quality, expressed or implied, and all other warranties, including any warranty
of merchantability or fitness for a particular purpose are hereby disclaimed.
Correction of nonconformities in the manner and for the period of time provided above shall be
purchaser's exclusive remedy and shall constitute fulfillment of all liabilities of ABB Control Inc.
whether in warranty, strict liability, contract, negligence, tort or otherwise with respect to any
nonconformance or defect in the product.
The foregoing warranty shall not apply to any product which has been: a) improperly repaired or
altered, b) subjected to misuse, misapplication, negligence or accident, c) used in a manner
contrary to manufacturer's directions.
AC 1035 — 10/1999
Limitation of Liability
ABB Control Inc.'s liability to purchaser on any claim in connection with the product shall not
exceed the purchase price of the product which gives rise to the claim.
otherwise including but not limited to loss of profits or revenue, loss of use of the product or any
associated product, cost of capital, cost of substitute products, facilities or services, downtime
costs or claims of customers of the purchaser for such or other damages.
Except as prohibited by law, all causes of action against ABB Control Inc. shall expire unless
brought within one year of the time of accrual thereof. ABB CONTROL INC. NEITHER ASSUMES
NOR AUTHORIZES ANYONE TO ASSUME FOR IT ANY OTHER OR FURTHER LIABILITY
THAN AS SET OUT ABOVE.
Patent Indemnity
ABB Control Inc. will at its own expense defend any suit which may
be brought against the Purchaser based on a claim that any apparatus or part furnished under
contract constitutes an infringement of any United States letter patent (provided ABB Control Inc.
is notified promptly of such suit and copies of all papers therein are delivered to ABB Control
Inc.), and ABB Control Inc. agrees to pay all judgements and costs recovered in any such suit
and to reimburse the Purchaser for costs of expenses incurred in the defense of any such claim
or suit. In case said apparatus or any part is held to constitute infringement and the use of the
apparatus or part is enjoined, ABB Control Inc. shall at its own expense, either procure for the
Purchaser the right to continue using the apparatus or part or replace it with non-infringing
apparatus; or modify it so it becomes non-infringing, or remove the apparatus and refund the
purchase price and the transportation and installation cost thereof. The foregoing states the entire
liability of ABB Control Inc. for patent infringement by apparatus or any part thereof.
Shipping loss or damage
In the event of shipping loss or damage: 1) Notification must be given to ABB Control Inc. within
72 hours of delivery; 2) Written notice of apparent loss or damage must be made on the carrier's
delivery receipt; and 3) Concealed damage must be immediately reported to the delivering
carrier with a request for inspection. Purchaser shall comply with the foregoing procedure
whether or not ABB Control Inc. has the risk of loss at the point of loss or damage to the
shipment.
Title – risk of loss
The products sold hereunder shall remain the property of
ABB Control Inc. and shall remain personal property until fully paid for in cash, and purchaser
agrees, if requested by ABB Control Inc. to execute a further security agreement covering the
products sold, and to perform all acts which may be necessary to perfect and assure retention of
title to such products by ABB Control Inc. Not withstanding any agreement with respect to
delivery terms, risk of loss or damage shall pass to the purchaser and delivery shall be deemed
to be complete upon delivery to a private or common carrier or upon moving into storage,
whichever occurs first, at the point of shipment.
Termination
Any order or contract may be terminated by the purchaser only on written notice and upon
payment of reasonable and proper termination charges, including without limitation, all costs
identified to the order of contract incurred by ABB Control Inc. up to the date of notice of
termination and all charges incurred by ABB Control Inc. in respect of the termination.
Returns
In no event will ABB Control Inc. be responsible for unauthorized return of products. Returns will
be accepted only at ABB Control Inc.'s option and subject to terms specified by ABB Control Inc.
Authorization and shipping instructions for return of products must be obtained from ABB Control
Inc. prior to return shipment. Product must be returned with proper identification. When a
purchaser requests authorization to return for his own reasons, the return is subject to a minimum
restocking charge of 20% for standard inventoried product and for any transportation paid by ABB
Control Inc., both out and ingoing. Returns will be accepted up to 60 days after invoice date.
Goods returned for purchaser's reason are subject to inspection and must be in good working
condition, as new, and in original cartons.
Purchase orders
Except as provided below, all orders must be in writing and show quantities and prices, complete
description (including catalog numbers) of products requested and mutually agreed delivery
dates.
Verbal orders received via telephone or otherwise must be confirmed within 5 days either by mail,
telex or the equivalent. Verbal orders with a purchase price over $5,000 will not be processed
until such written confirmation is received.
Unless otherwise agreed in writing, an addition to a previously entered order will be accepted
only at then applicable prices, discount schedules, conditions of sale, etc.
Special quotations
Special quotations will automatically expire 30 days from issuance unless renewed in writing by
ABB Control Inc.
Assignment
Any assignment of this contract, or any rights hereunder, without prior written consent of ABB
Control Inc. by a duly authorized representative thereof shall be void.
Partial invalidity
If any provisions herein or portions thereof conflict with any statute or rule of law of the
jurisdiction of applicable law or wherein the contract may be sought to be enforced, then such
provisions or portions thereof shall be deemed void to the extent that they may so conflict, but
without invalidating the remaining portions of such provisions or other provisions hereof.
Remedies
The remedies expressly provided for in the Conditions of Sale shall be in addition to any other
remedies which ABB Control Inc. may have under the Uniform Commercial Code or other
applicable law.
Terms
These terms and conditions govern all sales and shipments of control equipment products
(including parts and accessories).
ABB Control Inc. hereby gives notice of its objection to any different or additional terms and
conditions except for such as may be expressly accepted by it in writing.
Choice of law
The construction and performance of this contract and the rights and remedies of the parties
hereto shall be governed by the laws of the State of Texas.
IN NO EVENT SHALL ABB CONTROL INC. BE LIABLE FOR SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES whether in warranty, contract, strict liability, tort, negligence or
Table of contents: pg 2
ABB Control Inc.
Alphanumeric: pg 3
Selection: pg 4
Accessories: pgs 5 – 7
Tech data: pgs 8 – 9
Dimensions: pgs 10 – 13
15
Standard compliance and approvals
Worldwide approvals1
VDE 0660 CEI EN 60947-2 BS4752 NCF 120 IEC 947 UL489 CSA
C22.2 VDE 0660 CEI EN 60947-2 BS4752 NCF 120 IEC 947 UL489
CSA C22.2 VDE 0660 CEI EN 60947-2 BS4752 NCF 120 IEC 947
UL489 CSA C22.2 VDE 0660 CEI EN 60947-2 BS4752 NCF 120 IEC
947 UL489 CSA C22.2 VDE 0660 CEI EN 60947-2 BS4752 NCF 120
IEC 947 UL489 CSA C22.2 VDE 0660 CEI EN 60947-2 BS4752 NCF
120 IEC 947 UL489 CSA C22.2 VDE 0660 CEI EN 60947-2 BS4752
NCF 120 IEC 947 UL489 CSA C22.2 VDE 0660 CEI EN 60947-2
BS4752 NCF 120 IEC 947 UL489 CSA C22.2 VDE 0660 CEI EN
60947-2 BS4752 NCF 120 IEC 947 UL489 CSA C22.2 VDE 0660
The CE Mark
ABB Low Voltage Apparatus
ABB is a global group serving customers
in electric power generation,
transmission and distribution, industrial
building systems, and rail transportation.
ABB Low Voltage Apparatus develops,
produces and markets low voltage
products such as disconnect switches,
contactors,
starters,
pushbuttons,
soft starters, arc
guard systems,
relays, minicontactors,
manual motor
starters, Isomax
MCCBs, and
MCBs. With six manufacturing units
within the European Union, we are
ideally located to develop, manufacture
and provide low voltage equipment to
comply with the EU directive.
Background
The guarantee of free trade of goods
within the Community is the most
important objective. This will eliminate
trade restrictions that result from
different technical regulations in each
individual member country.
Harmonization of existing European
standards and regulations, is being
accomplished and already partially
realized. Based on this goal, a new
concept for creating directives was
formed in 1985 by the European
Community (EC) Commission to produce
directives with a wide range of
application which contain only the most
basic safety requirements.
The CE Mark
ABB´s commitment to
the directives
ABB Low Voltage Apparatus producing
companies will attach the CE mark in
accordance with the product directives.
Our products will conform as follows:
• Declarations of conformity for ABB
products will be available when
required by the relevant EU directives.
• Those products required to do so will
bear CE marking as specified by the
relevant EU directives and CE marking
regulations.
• Necessary technical documentation
will be on file and made available to
authorized organizations upon written
request.
The CE mark is prescribed by law and
assures the European free trade of
goods. It is short for “Communauté
Européen”, and is displayed on goods
and/or packaging which acts as an
external symbol for the inspection of
products. It also illustrates the
manufacturer’s responsibility to uphold
the community’s directives.
1 Approvals listed may not apply to products listed in this publication.
Table of contents: pg 2
16
Alphanumeric: pg 3
Selection: pg 4
Accessories: pgs 5 – 7
Tech data: pgs 8 – 9
Dimensions: pgs 10 – 13
ABB Control Inc.
AC 1035 — 10/1999
Within the European Union, EU,
conformity of products and the proper
application of the CE marking to
machines and control equipment is
necessary for marketing electrical
equipment. The intent is to ensure
compliance with all relevant EU
Directives.
Product scope
Industrial controls
•
•
•
•
•
•
•
•
•
•
•
•
•
Contactors
Drive contactors
Welding contactors
Overload relays
Starters, open & enclosed
Manual motor starters
Softstarters
Control relays
Pilot devices
Miniature controls
Control circuit transformers
Sensors
Arc Guard systems
Circuit protective
devices
•
•
•
•
•
•
Fusible disconnect switches
Non-fusible disconnect switches
Enclosed disconnect switches
Molded case circuit breakers
Miniature circuit breakers
Megamax & Emax power
circuit breakers (IEC)
Low Voltage
Network Quality
Power factor correction
• Individual capacitors
• Fixed capacitor banks
• Automatic capacitor banks
Harmonics correction
• Anti-resonance capacitor banks
• Filter banks
• Dynacomp
L O W
V O L T A G E
N E T W O R K
Q U A L I T Y
ABB Control Inc.
1206 Hatton Road
Wichita Falls, TX 76302
Tel.
888-385-1221
940-397-7000
Fax
940-397-7001
Email abbcontrol@uscon.mail.abb.com
www www.abb.com/usa/abbcontrol
AC 1035
October, 1999