Bulletin 412A
Stainless
Steel
Stainless
Steel
I N D U S T R I A L E VA P O R AT O R S
Copper
Copper
Copper
Aluminum
SUPERIOR PRODUCTS
FROM
Aluminum
SUPERIOR TECHNOLOGY
Aluminum
Member of
International Institute of
Ammonia Refrigeration
www.iiar.org
Corporate Headquarters, Taneytown, MD
S
ince 1976, EVAPCO, Incorporated has become a
leader in the engineering, manufacturing and
T
he ST Series Evaporator Product Lines have been
expanded to include:
supply of quality refrigeration products for the largest
New coil sizes and larger capacities
food and beverage processors around the world.
New combinations of coils and fan motors
New material option with Aluminum
tube coils
EVAPCO is an Employee-Owned Company whose success has been the result of a continual commitment
to product development, quality workmanship and a
dedication to provide the highest level of customer
service in the industry.
S
T Series Evaporators are well-suited for all types of
applications. The ST product lines are the result of
extensive low temperature coil research in EVAPCO’s
With its strong emphasis and annual allocation of
state-of-the-art laboratory. This research coupled with
resources to Research & Development and modern
EVAPCO’s extensive product application experience has
manufacturing facilities, EVAPCO has earned a repu-
yielded a new coil design that provides:
tation for technological innovation and superior
product quality. EVAPCO’s product development
Higher Heat Transfer Efficiency
team continues to focus on the latest needs and con-
Lower Annual Operating Costs
cerns of the Industrial Refrigeration end-user with
Reliable Product Operation
new product designs offering:
Simplified Maintenance
Improved Hygiene and Cleanability
Reduced Energy Requirements
Durable Materials of Construction
P RODUCT F EATURES
Easier Maintenance Accessibility
ST Series Evaporators feature a high performance heat
Clean Hygienic Design
exchanger coil. SST Models are constructed of Type 304L
Stainless Steel tubing and Aluminum fins as standard
equipment. SLT Models are constructed with Aluminum
EVAPCO has consistently achieved record sales
tubing and Aluminum fins. SCT Models are equipped
growth year after year establishing itself as the
with heat exchanger coils manufactured from Copper
industry leader and setting the standard for Quality
tubing with Aluminum fins. The unit casing and drain
and Service for others to follow.
pan are available in either premium G-235 Hot Dip
Galvanized Steel or Type 304 Stainless Steel depending
EVAPCO products are manufactured in 16 facilities
on the product line. ST Series Evaporators are available
located in 7 countries around the world and supplied
in several different models with a wide range of capaci-
through a sales network consisting of over 160 offices.
ties to deliver the cold air required in the majority of
product applications.
2
STM
UNIT COOLERS
Small to medium size unit coolers for freezers, coolers
and docks requiring low, medium and high temperature
applications. STM Models offer improved accessibility
features, clean cabinet/pan design and corrosion
inhibiting materials of construction.
STM Evaporators are offered with Stainless Steel tube
(SSTM Models), Aluminum tube (SLTM Models) or
Copper tube (SCTM Models) all with Aluminum fins.
STM Evaporators are available in capacities from
1.5 to 56 TR.
SSTL
PRODUCT COOLERS
Large product coolers for low and medium temperature
freezer or cooler applications. SSTL Models combine high
capacity models with maintenance friendly features for
the best value in large evaporators.
SSTL Evaporators are only available with Stainless Steel
tube with Aluminum fins. SSTL Models are available in
capacities from 11 to 86 TR.
STW
WORKROOM UNITS
Low velocity air units for processing rooms. Units feature
stainless construction with hinged panels for easy access.
STW Evaporators are designed to provide
working comfort in high occupancy rooms.
STW Evaporators are offered with Stainless Steel tube
(SSTW Models), Aluminum tube (SLTW Models) or Copper
tube (SCTW Models) all with Aluminum fins.
STW Evaporators are available in capacities from
2 to 27 TR.
STD
LOW PROFILE COOLERS
Dual coil models for low, medium and high temperature applications in rooms with low ceiling height
requirements. STD Models feature a unique clean
cabinet/pan design available in durable materials of
construction.
STD Evaporators are offered with Stainless Steel tube
(SSTD Models), Aluminum tube (SLTD Models) or Copper tube (SCTD Models) all with Aluminum fins.
STD Evaporators are available in capacities from 3 to 33 TR.
3
EXTENSIVE RESEARCH & DEVELOPMENT
HEAT EXCHANGER COIL
R ESEARCH & D EVELOPMENT
EVAPCO has long been known for its innovation in heat
The EVAPCO Research &
exchanger coil design. Over ten years ago, EVAPCO intro-
Development
duced the Thermal-Pak® Finned Coil which revolutionized
features the industry’s
the industry. EVAPCO has
largest low temperature,
raised the bar again through
insulated environmental
the strength of field experience
test chamber. The condi-
and R&D focused on coil tech-
tions in the test chamber
nology. ST Evaporators are
are controlled by a fully
equipped with a high perform-
functional
ance coil designed specifically
for industrial applications.
The coil tube diameter, geometry and circuiting have been
optimized through thousands of hours of theoretical modeling and actual laboratory testing. The result is optimal heat
transfer efficiency with the lowest airside pressure drop. The
ST evaporators offer superior performance with the lowest
available motor horsepower per ton.
refrigeration
ammonia
system
designed to operate at suction temperatures as low as -60° F.
EVAPCO is committed to providing the most innovative
products to meet
today’s stringent
application needs
and has dedicated the necessary
resources to pro-
OPTIMIZED COIL CIRCUITING
Industrial refrigeration experience demonstrates that coil circuiting must be designed to match the heat transfer load for
vide that technology today.
a specific refrigerant at the operating temperature. The cir-
F AN T EST S TAND
cuiting program used on all EVAPCO coils has been opti-
The ST Series evaporator performance is based on critical
mized based on actual coil operation in EVAPCO’s research
analysis of the fan performance. Working in EVAPCO’s Air
lab. Refrigerant flow and pressure drop measurements were
Movement and Controls Association (AMCA) style airflow
matched against coil performance to find the optimum cir-
test chamber, fan and motor combinations were matched to
cuiting pattern for a given set of flow and temperature con-
each coil/cab-
ditions. Optimizing the number of circuits and the circuiting
inet
pattern improves the heat transfer efficiency of the coil sys-
to
tem and lowers annual operating cost for the end user.
optimum
design
achieve
performance.
COIL DESIGN
Through the use of computational fluid dynamics (CFD) modeling software, finite element heat transfer analysis and proprietary coil performance calculation methods, EVAPCO engineers
identified significant design elements to improve the finned coil
performance.
The extensive com-
puter modeling was later refined
and verified through coil performance evaluation in EVAPCO’s research laboratory.
4
Center
ADVANCED MATERIALS
AND
DESIGN FEATURES
SUPERIOR STAINLESS STEEL
TECHNOLOGY – SST MODELS
CASING
SST Evaporators are constructed with high grade Type 304L
Standard construction of the casing and drain pan is from
Stainless Steel tubing and Aluminum fins as standard. The
G-235 Hot Dip Galvanized Steel with an option for Type 304
stainless steel tubing meets the requirements of ASME B31.5
Stainless Steel. G-235 is the highest level of mill galvanizing
refrigerant piping code. The tubing is manufactured from
offered in the industry and exceeds the zinc protection that
high quality Type 304L Stainless Steel, roll formed, continu-
other manufacturers provide when using G-90 mill galvanized
ously welded and annealed. The tube is tested using an eddy
steel. The higher level of galvanizing provides a greater level
current device.
of corrosion protection for a longer product life.
STM & SSTL Evaporators
The round tubing is fit into the Aluminum fin plate and
hydraulically expanded. This procedure provides more consistent contact between the tube and the fin plate than
mechanical expansion. The entire coil is then pressure tested
to 400 psig. Lastly, the coil is evacuated and charged with low
pressure Nitrogen prior to shipment.
STW Evaporators
Workroom units are manufactured with Type 304 Stainless
Steel casing panels and pan cover. The shipping supports are
constructed from G-235 Hot Dip Galvanized Steel and should
be removed after installation.
The Stainless Steel tubes are available in 5/8" OD and 1.05”
STD Evaporators
OD. Coils are built in 3, 4 and 6 fpi as standard using a full
Standard construction of the casing and drain pan is from
collar Aluminum fin designed to enable debris to flow
G-235 Hot Dip Galvanized Steel with an option for Type 304
through the coil and allow for more efficient cleaning.
Stainless Steel.
Variable fin spacing is available as an option.
Refer to the product sections in this bulletin for additional
SUPERIOR ALUMINUM
TECHNOLOGY – SLT MODELS
construction details.
SLT Evaporators are built with seamless 5/8” OD Aluminum
FANS
tubing. The Aluminum tubes are are fit into the Aluminum
EVAPCO’s extensive air side research and testing has identified
fin and expanded for optimum contact between tube and fin.
fans with the best combination of efficiency and sound levels.
3, 4 and 6 fpi increments are available with variable spacing
Standard catalog models are selected to provide low sound
as an option.
levels. EVAPCO’s low sound fan selections provide more comfort and a safer working environment for personnel entering
SUPERIOR COPPER
TECHNOLOGY – SCT MODELS
the cold space. SSTL Evaporators have cast aluminum fans as
standard while cast blades are optional on most other models.
SCT Evaporators are manufactured with seamless 5/8" OD
Copper tubing. The Copper tubes are fit into the Aluminum
fin and expanded for optimum contact between tube and fin.
Coils are built in 3, 4 and 6 fpi increments with a full collar aluminum fin designed to enable debris to flow through the coil
and allow for more efficient cleaning. Variable fin spacing is
available as an option.
5
STM SMALL & MEDIUM UNIT COOLERS
Small to medium size unit coolers for freezers, coolers and docks for low, medium and
high temperature applications. STM Evaporators are equipped with many owner
oriented features that increase the ease of maintenance, improve the hygienic design of
the evaporator and provide a safer working environment.
Shown with shipping and installation supports.
SSTM constructed with heavy wall Stainless Steel tubing
SLTM constructed with Aluminum tubing
SCTM constructed with Copper tubing
Standard Aluminum Fin construction
One to five fan models
Capacities from 1.5 to 56 TR
Clean cabinet design
Hygienic drain pan design
Easy installation
6
CONSTRUCTION
STM Evaporators are furnished with heavy duty sheet
SSTM Evaporators are manufactured as standard with Type
metal fans as standard. EVAPCO has selected these fans
304L Stainless Steel tubing and Aluminum fin heat exchanger
specifically for their efficiency as well as for their low
coils. SLTM Models are built with Aluminum tube and
sound to improve worker comfort and safety. Optional
Aluminum fin coils. SCTM Evaporators are equipped with
cast aluminum fan blades are available to meet special low
Copper tubing and Aluminum fin coils. The casing and drain
temperature applications.
ADVANCED MATERIALS
OF
pan are manufactured from G-235 Hot Dip Galvanized steel
as standard. Optional materials of construction for the cas-
Sloped Top Panels
ing and drain pans are Type 304 Stainless steel.
The top panels of STM Evaporators are sloped to prevent
moisture from condensation or clean-up cycles from accumu-
DESIGN FEATURES
lating on the top of the unit. Water from the top of the unit
STM evaporators are equipped with owner-oriented benefits
will drain into the over-sized, full coverage drain pan,
that solve many operational problems end users have experi-
improving the cleanliness of the unit and preventing the pos-
enced with traditional evaporators. Cleanability, good main-
sibility of product contamination.
tenance access and a safe working environment are important
concerns of most end-users. EVAPCO has designed the STM
Drain Pans
Evaporator to address all of these issues and to provide the
Sloped Hygienic Design
easiest evaporator to clean and maintain.
The drain pans on STM Evaporators are sloped in two directions to prevent water from pooling in the pan. The drain
Hinged Fan Panels
pans are custom engineered and equipped with swaged bot-
The fan panels on all STM Evaporators are hinged to provide
access to the fan motors and the air exit side of the coil. This
tom outlets to ensure complete drainage. The drain pan is
factory mounted prior to shipment.
feature facilitates
cleaning of the
coil and drain pan
as well as allowing
the operator to
perform any maintenance required
to the interior of
the unit.
Fans & Fan Motors
All fan motors including fractional horsepower fan motors are
foot mounted for improved durability in a wide range of
operating conditions. EVAPCO worked closely in conjunction
with leading motor manufacturers to develop fan motors
specifically for evaporator applications. Fan motors on catalog models up to 1-1/2 horsepower are equipped with automatic thermal overload protection and all fan motors are prewired to a NEMA 4X
The standard drain pans on STM Evaporators provide full coverage of the entire casing section and coil connections. This
design ensures that all moisture from the evaporator collects
in the drain pan while preventing any droplets from falling
into the refrigerated space. In addition, the drain pans are
fully accessible with the wet coil baffles installed. Wet coil baffles are installed in the middle of the coil to prevent air bypass
and allow for drain pan access from both sides of the coil.
junction box. Fan motors
are mounted on struc-
Ease of Installation
tural channels designed
STM Evaporators are designed for greater structural rigidity
and built by EVAPCO to
and easier installation. STM Models ship with sheet metal
operate reliably and are
guaranteed
Full Coverage, Fully Accessible
channels that allow the unit to be easily handled with a
against
forklift. Once the unit is installed, the shipping supports are
structural failure caused
easily removed.
by low temperature conditions.
Optional Cast Aluminum Fan Blades
7
SSTL LARGE PRODUCT COOLERS
Large product coolers for low and medium temperature freezer or cooler applications.
Built for larger applications, SSTL Evaporators offer end user oriented features that
improve sustainability and facilitate maintenance.
SSTL constructed with heavy wall Stainless Steel tubing
Standard Aluminum Fin construction
One to four fan models
Capacities from 11 to 86 TR
Clean cabinet design
Hygienic drain pan design
Easy installation
8
ADVANCED MATERIALS
OF
CONSTRUCTION
Sloped Top Panels
SSTL Evaporators are manufactured as standard with Type
The top panels of SSTL Evaporators are sloped to prevent
304L Stainless Steel tubing and Aluminum fin heat exchanger
moisture from condensation or clean-up cycles from accumu-
coils. The casing and drain pan are manufactured from G-235
lating on the top of the unit. Water from the top of the unit
Hot Dip Galvanized steel as standard. Optional materials of
will drain into the drain pan, improving the cleanliness of the
construction for the casing and drain pans are Type 304
unit and preventing the possibility of product contamination.
Stainless steel.
Drain Pans
DESIGN FEATURES
Sloped Hygienic Design
SSTL evaporators are equipped with owner-oriented benefits
The drain pans on SSTL Evaporators are sloped in two direc-
that solve many operational problems end users have experi-
tions to prevent water from pooling in the pan. The drain
enced with traditional evaporators. Cleanability, good main-
pans are custom engineered and equipped with swaged bot-
tenance access and a safe working environment are important
tom outlets to ensure complete drainage. The drain pan is
concerns of most end-users. EVAPCO has designed the SSTL
factory mounted prior to shipment.
Evaporator to address all of these issues.
Fans & Fan Motors
All fan motors are foot mounted for improved durability in a
wide range of operating conditions. EVAPCO worked closely in conjunction with leading motor manufacturers to develop fan motors specifically for evaporator applications. All
fan motors are prewired to a NEMA 4X
junction
box.
Fan
motors are mounted
on structural channels
designed and built by
EVAPCO to operate
reliably and are guaranteed against structural failure caused
by low temperature
conditions.
Cast Aluminum Fan Blades
SSTL Evaporators are furnished with heavy duty cast aluminum fans as standard. EVAPCO has selected these fans
specifically for their efficiency as well as for their low
sound to improve worker comfort and safety.
9
STW WORKROOM UNITS
STW Evaporators are designed for low velocity applications such as processing rooms
where the evaporators are located in the same space as operating personnel.
Shown with shipping and rigging supports.
SSTW constructed with heavy wall Stainless Steel tubing
SLTW constructed with Aluminum tubing
SCTW constructed with Copper tubing
Standard Aluminum Fin construction
One to five fan models
Capacities from 2 to 27 TR
Easy access cabinet design
Hygienic drain pan design
Easy installation
10
ADVANCED MATERIALS
CONSTRUCTION
OF
SSTW Evaporators are manufactured as standard with Type
will drain into the over-sized full coverage drain pans, thereby, improving the cleanliness of the unit and preventing the
possibility of food contamination.
304L Stainless Steel tubing and Aluminum fin coils. SLTW
Evaporators are built with Aluminum tube and Aluminum fin
coils. SCTW Evaporators are built with Copper tubing and
Drain Pans
Sloped Hygienic Design
Aluminum fins. Casing panels and drain pan covers are also
The drain pans on STW Evaporators are sloped in two direc-
Type 304 Stainless Steel. Fan motor base, inner pan liner and
tions to prevent water from pooling in the pan. The drain
shipping/installation supports are constructed from G-235 Hot
pans are custom engineered and equipped with swaged bot-
Dip Galvanized Steel with options for Type 304 Stainless Steel.
tom outlets to ensure complete drainage of the pan. The
drain pan ships factory mounted on the unit.
DESIGN FEATURES
The STW evaporators are equipped with owner-oriented
benefits that improve the operation of processing rooms.
The ease of maintenance and improved accessibility reduces
downtime required for clean-up.
Hinged Access Panels
All casing panels on STW Evaporators are hinged to facilitate
cleaning. Where most workroom units have removable casing panels, the hinged panels on the STW reduce the time
required to service the evaporator.
Full Coverage, Fully Accessible
The drain pans on STW Evaporators provide full coverage of
the entire casing section and coil connections as standard.
This ensures that all moisture from the evaporator collects in
the drain pan while preventing any water droplets from
falling into the refrigerated space. In addition, the drain
pans are fully accessible. The operator has access to the
entire drain pan for cleaning without any disassembly.
Fans & Fan Motors
All fan motors including fractional horsepower fan motors
are foot mounted for improved durability in a wide range of
operating conditions.
All fan motors are equipped with
automatic thermal overload protection and are pre-wired to
a NEMA 4X junction box. Fan motors are mounted on heavy
gauge structural channels specifically designed and built by
Ease of Installation
EVAPCO to operate reliably. All catalog models are selected
STW Evaporators are designed for greater structural rigidity
with 870 rpm motors for low air velocity and low sound.
and easier installation. Shipping supports incorporate structural channels that allow them to be safely lifted into posi-
Sloped Top Panels
tion using a forklift. Once the unit is installed, the supports
The top panels of STW Evaporators are sloped to prevent
are easily removed. The increased structural integrity of the
moisture from condensation or clean-up cycles from accu-
STW evaporators allow for the elimination of shipping skids
mulating on the top of the unit. Any water from this area
and crating disposal expense.
11
STD DUAL COIL LOW PROFILE UNIT COOLERS
STD Evaporators are designed for freezer and cooler applications requiring a low profile
unit or dual airflow from a single unit.
Shown with shipping and installation supports.
SSTD constructed with heavy wall Stainless Steel tubing
SLTD constructed with Aluminum tubing
SCTD constructed with Copper tubing
Standard Aluminum Fin construction
One to five fan models
Capacities from 3 to 33 TR
Easy access cabinet design
Hygienic drain pan design
Easy installation
12
MATERIALS
OF
CONSTRUCTION
SSTD Evaporators are manufactured with Type 304L Stainless
Steel tubing and Aluminum fin coils as standard.
SLTD
Models are built with Aluminum tube and Aluminum fin
coils. SCTD Evaporators are built with Copper tubing and
Aluminum fins.
Casing panels and drain pans are G-235 Hot
Dip Galvanized steel as standard. Type 304 Stainless steel
construction is available as an option
HINGED FAN
PANELS
The fan panels on all STD
Evaporators are hinged
to provide access to the
fan motors and plenum
section of the unit. This
feature facilitates clean-
Full Coverage, Fully Accessible
The standard drain pans on STD Evaporators are fully accessible. Wet coil baffles are installed in the middle of the coil.
This allows the operator to clean the entire drain pan without any disassembly.
ing of the inside coil face
and the unit housing as
INTERCONNECTING PIPING
well
the
EVAPCO furnishes the interconnecting piping between coils
operator to perform any
for the inlet and outlet connections. This reduces the cost of
maintenance required to
installation of the evaporators.
as
allowing
the interior of the unit.
FAN MOTORS
All fan motors, including fractional horsepower, are foot
mounted on heavy duty steel channels for improved structural integrity. Fan motors on catalog models up to 1-1/2
horsepower are equipped with automatic thermal overload
protection. All fan motors are pre-wired to a NEMA 4X
junction box. Fan motors are mounted on structural channels designed by EVAPCO.
STD Evaporators are furnished with heavy duty sheet metal
fans as standard. Optional cast aluminum fans are available
for special low temperature applications.
DRAIN PANS
Sloped Hygienic Design
UNIT CONFIGURATION
All dual coil model Evaporators can be constructed for either
blow-thru or draw-thru air configuration to match the room
application.
Ease of Installation
Evaporators are designed for greater structural rigidity and
easier installation. STD shipping supports incorporate struc-
The drain pans on STD Evaporators are sloped in two direc-
tural channels that allow the unit to be easily handled with a
tions for maximum effectiveness and to prevent any water
forklift. Once the unit is installed, the supports should be
from pooling in this critical area. The saddle drain connec-
removed.
tion is installed in the end of the pan to minimize the height
of the evaporator piping and to ensure complete drainage.
13
OPTIONAL FEATURES
Air Discharge Arrangements
Long Throw Adapters
ST Series Evaporators may be equipped with long throw
adapters for installations in large rooms or corridors.
45° or 90° Downblow Configuration
ST Series Evaporators may be equipped with a 45°
downblow option for layout flexibility or with 90° downblow for penthouse applications.
Defrost
Air
ST Series Evaporators with air defrost are equipped with
full coverage insulated drain pans.
Water
ST Series Evaporators with water
defrost are equipped with a water
distribution system and a special
drain pan to prevent water from
splashing into the refrigerated space.
Hot Gas
Hot gas defrost options include the
coil only or hot gas coil and pan. For
coil only defrost, ST Series
Evaporators are equipped with insulated drain pans. For hot gas coil
and pan, ST Series Evaporators are
equipped with a hot gas coil under
the inner drain pan. The unique
Series flow Hot
design of the hot gas drain pan pro- Gas Coil and Pan
with factory
vides for highly efficient defrost.
mounted check
Hot gas defrost units may be piped
valve
with either parallel feed to coil and
drain pan or series flow from drain pan to coil. Hot gas
pan-to-coil piping includes a factory mounted check valve.
Electric Defrost
Available on STM, STD and STW Models, the electric
defrost option incorporates electric resistance heater elements with termination thermostat to defrost the coil.
STM and STD electric defrost options are sized based on
room temperature. Electric pan heaters included for
room temperatures below 32°F. Electric defrost can be
supplied with optional heater contractor.
Electrical
Fan Motors on ST Series Evaporators are
prewired to a terminal box as standard.
Wiring on one and two fan models terminate with leads inside a NEMA 4x
junction box. For models with three or
more fan motors, a terminal strip is
included to which the motor leads are
wired. Other electrical options include:
Prewired to Terminal Strip
Prewired to a Common Non-Fused
Disconnect
14
Terminal Strip
Prewired to Disconnect
with Thermal Overload
Protection
Prewired to Magnetic
Motor Starter with
Disconnect
Common Non-Fused Disconnect
Fan Motors
All ST Series Evaporators are supplied with totally enclosed
air over (TEAO), foot mounted fan motors with sealed bearings and low temperature grease. Standard motors range
from 1/2 horsepower fractional motors to 5 horsepower and are suitable for
230/460 volt, 3 phase, 60
cycle applications. In addition, standard motors are
across-the-line start and
operate at either 870, 1160 or
1750 rpm.
All 870 rpm
motors up to 1 hp, all 1160
rpm motors up to 1-1/2 hp
and all motors up to 2 hp
1750 rpm are equipped with
automatic thermal overload protection. Optional motors are
available, some of which are detailed below.
Multi-Speed
ST Series Evaporators may be equipped with multi-speed fan
motors to match equipment capacity to reduced heat load
requirements.
Inverter Duty
ST Series Evaporators may be equipped with VFD duty fan
motors for infinite steps of capacity control.
Washdown Duty
For applications requiring CIP or water clean-up cycles, ST
Series Evaporators may be equipped with washdown duty
fan motors.
Coil Options
Reheat Coil
Optional reheat coils are available
for applications requiring humidity
control. A separate heating coil is
designed and circuited for refrigerant or an alternate heat source and
is installed on the leaving air side of
the cooling coil to heat the air to the
desired temperature. Consult your
EVAPCO Industrial Refrigeration
Representative for selection and
application assistance.
AIR
Reheat Coil
Configuration
Heavy FIn
ST Series Evaporators can be equipped with 0.028” heavy
gauge Aluminum fins. 8 times stronger than galvanized
steel fins, this option provides heavy duty construction for
harsh environments and heavy frost applications.
OPTIONAL FEATURES
(Cont.)
Canadian Registration Number
ST Series Evaporators can be furnished with CRN for
Canadian applications.
Variable Fin Spacing
For applications where
heavy frost loads are anticipated, variable fin spacing is
available to extend cycles
between defrost. Variable
fin spacing is available in
1.5/3 fpi or 2 /4 fpi in two
Variable Fin Spacing
row increments. Consult
your EVAPCO Industrial Refrigeration Representative for
selection and application assistance.
Drain Pan Options
Hot Gas Defrost
Drain pans equipped with hot gas defrost incorporate a
unique tube design mechanically bonded to the underside
of the pan liner and secured with a retaining plate. The
hot gas coil design provides more heat transfer surface
area and results in improved defrost performance with
very low pressure drop. The construction features yield a
completely flat, easy to clean interior pan surface.
Stainless Steel Construction
• Inner pan liner, outer pan cover or both
Heat Tracing
• Inner pan liner
• Outer pan cover
Over-sized Drain Pan
Wider and/or longer than standard
CUSTOM COIL
APPLICATIONS
EVAPCO offers a broad range of unit configurations along with
engineering expertise and manufacturing capability to design
and build virtually any type of non-cataloged custom coil or
special unit, some of which are featured below. We welcome
the opportunity to meet with you and discuss your custom coil
applications. Please call your EVAPCO Industrial Refrigeration
Representative or contact the factory for assistance.
Spiral Freezer Evaporator
Custom Coils
Custom fin length, rows deep and/or tubes high
Alternate materials of construction
• Hot Dip Galvanized Steel
• Stainless Steel Tube and Aluminum Fin
• Copper Tube and Aluminum Fin
• Aluminum Tube and Aluminum Fin
Inner Pan Liner
Hot Gas Coil
Retainer
Stacked Blast Freezer Evaporator
Foam Board Insulation
Outer Pan Cover
Hot Gas Drain Pan
Floor Mount Evaporator
15
EVAPCO–YOUR ONE SOURCE FOR
QUALITY REFRIGERATION SYSTEM COMPONENTS.
Evaporative Condensers
Custom
Recirculators
& Vessels
Critical Process
Air Systems
Induced Draft Models
Forced Draft Models
Make-Up
Air Systems
Cooling Towers & Closed Circuit Coolers
MRP Recirculator
Systems™
Forced Draft Models
Induced Draft Models
EVAPCO, Inc. — World Headquarters & Research / Development Center
EVAPCO, Inc. P.O. Box 1300 Westminster, MD 21158 USA
PHONE: 410-756-2600 FAX: 410-756-6450 E-MAIL: marketing@evapco.com
EVAPCO North America
EVAPCO Europe
EVAPCO, Inc.
North American Headquarters
P.O. Box 1300
Westminster, MD 21158 USA
Phone: 410-756-2600
Fax: 410-756-6450
E-mail: marketing@evapco.com
EVAPCO East
5151 Allendale Lane
Taneytown, MD 21787 USA
Phone: 410-756-2600
Fax: 410-756-6450
E-mail: marketing@evapco.com
EVAPCO Midwest
1723 York Road
Greenup, IL 62428 USA
Phone: 217-923-3431
Fax: 217-923-3300
E-mail: evapcomw@evapcomw.com
EVAPCO West
1900 West Almond Avenue
Madera, CA 93637 USA
Phone: 559-673-2207
Fax: 559-673-2378
E-mail: contact@evapcowest.com
EVAPCO Iowa
925 Quality Drive
Lake View, IA 51450 USA
Phone: 712-657-3223
Fax: 712-657-3226
Refrigeration Valves &
Systems Corporation
A wholly owned subsidiary of EVAPCO, Inc.
1520 Crosswind Dr.
Bryan, TX 77808 USA
Phone: 979-778-0095
Fax: 979-778-0030
E-mail: rvs@rvscorp.com
McCormack Coil Company, Inc.
A wholly owned subsidiary of EVAPCO, Inc.
P.O. Box 1727
6333 S.W. Lakeview Boulevard
Lake Oswego, OR 97035 USA
Phone: 503-639-2137
Fax: 503-639-1800
E-mail: mail@mmccoil.com
A wholly owned subsidiary of EVAPCO, Inc.
8331 Nieman Road
Lenexa, KS 66214 USA
Phone: 913-322-5165
Fax: 913-322-5166
E-mail: marketing@evaptechinc.com
EVAPCO China
Asia/Pacific Headquarters
1159 Luoning Rd. Baoshan Industrial Zone
Shanghai, P. R. China, Postal Code: 200949
Phone: (86) 21-6687-7786
Fax: (86) 21-6687-7008
E-mail: marketing@evapcochina.com
EVAPCO Europe, S.r.l.
Via Ciro Menotti 10
1-20017 Passirana di Rho
Milan, Italy
Phone: (39) 02-939-9041
Fax: (39) 02-935-00840
E-mail: evapcoeurope@evapco.it
Evapco (Shanghai) Refrigeration
Equipment Co., Ltd.
1159 Louning Rd., Baoshan Industrial Zone
Shanghai, P.R. China
Postal Code: 200949
Phone: (86) 21-6687-7786
Fax: (86) 21-6687-7008
E-mail: marketing@evapcochina.com
EVAPCO Europe, S.r.l.
Via Dosso 2
23020 Piateda Sondrio, Italy
EVAPCO Europe, GmbH
Bovert 22
D-40670 Meerbusch, Germany
Phone: (49) 2159-69560
Fax: (49) 2159-695611
E-mail: info@evapco.de
Beijing EVAPCO Refrigeration
Equipment Co., Ltd.
Yan Qi Industrial Development District
Huai Rou County
Beijing, P.R. China
Postal Code: 101407
Phone: (86) 10 6166-7238
Fax: (86) 10 6166-7395
E-mail: evapcobj@evapcochina.com
EVAPCO S.A. (Pty.) Ltd.
Aqua-Cool Towers (Pty.) Ltd.
A licensed manufacturer of EVAPCO, Inc.
A licensed manufacturer of EVAPCO, Inc.
18 Quality Road
Isando 1600
Republic of South Africa
Phone: (27) 11 392-6630
Fax: (27) 11-392-6615
E-mail: evapco@evapco.co.za
34-42 Melbourne St.
P.O. Box 436
Riverstone, N.S.W. Australia 2765
Phone: (61) 29 627-3322
Fax: (61) 29 627-1715
E-mail: sales@aquacoolingtowers.com.au
A wholly owned subsidiary of EVAPCO, Inc.
5960 US HWY 64E
Ramseur, NC 27316
Phone: 336-824-2102
Fax: 336-824-2190
E-mail: mail@towercomponentsinc.com
EVAPCO...SPECIALISTS
IN
Tiba Engineering Industries Co.
A licensed manufacturer of EVAPCO, Inc.
5 Al Nasr Road St.
Nasr City,
Cairo, Egypt
Phone: (20) 2-290-7483 / (20) 2-291-3610
Fax: (20) 2-404-4667/ (20) 2-290-0892
E-mail: manzgroup@tedata.net.eg
HEAT TRANSFER PRODUCTS
Visit EVAPCO’s Website at:
3M/DGD/10-07
EVAPCO Europe, N.V.
European Headquarters
Industrieterrein Oost 4010
3700 Tongeren, Belgium
Phone: (32) 12-395029
Fax: (32) 12-238527
E-mail: evapco.europe@evapco.be
EvapTech, Inc.
Tower Components, Inc.
EVAPCO Iowa
Sales & Engineering
1234 Brady Boulevard
Owatonna, MN 55060 USA
Phone: 507-446-8005
Fax: 507-446-8239
E-mail: evapcomn@evapcomn.com
EVAPCO Asia/Pacific
AND
SERVICES.
http://www.evapco.com
Printed on FSC Certified Paper – 25% PCW
Printed with Soy Based Inks
©2007 EVAPCO, Inc.