Stannah Xtralift 2.0
passenger lift range
Lift finishes and options
Fashioned to suit a range of environments the
Xtralift 2.0 offers a range of options for walls, floors
and ceilings and the choice to mix and match them
too. Customise with your own car photography or
choose a finish from our range. Whichever finish
you choose will be attractive, durable and blend
beautifully into the surrounding environment.
Contents
• Car walls
• Car ceilings
• Car floors
• Car operating panels
• Landing controls and indicators
• Mirrors and handrails
• Xtralift 2.0 standard specification
• Example configurations
Samples are available on request – please call: 01264 339090
The colours and designs reproduced in this document have been matched as closely as the
scanning and printing process will allow. It is recommended you obtain samples prior to final
specification. We are continually developing and improving our range of products and finishes
and we therefore reserve the right to alter or amend the specification without prior notice.
Car walls
White
Slate Blue
Silver Grey
Beige
K01
K10
K11
K17
Satin
Mirror
Linen
Elephant Hide
Vinyl skinplates
Please note
All skirting, corner profiling and entrance
returns are satin stainless steel as standard.
The stainless steel grading is AIS1441 as
standard. We offer AIS1316 as a special option.
Stainless steel†
Laminates
X02
X12
X13
X14
Sand
Plum
Light Blue
Light Grey
0414
6903
7884
7927
Redwood
Light Oak
Grey Woodgrain
Pear
Beech
Walnut
1293
7520
1672
2884
2958
1306
Red
White
Blue
Forest
Splash
Custom
Glass
Create your own
AC2
BACK TO
CONTENTS
NEXT
SECTION
AC4
AC6
AI1
AI4
XTRALIFT 2.0 – SECTION 1: CAR WALLS
Car ceilings
Bubble
Please note
All suspended ceilings with stainless steel finish
as standard. Ceilings are available in optional
finishes on request.
Standard
All ceilings are available with standard halogen
lighting (no. of lights is dependent on car size)
or high energy efficiency (LED).
L11
Mirror stainless steel and plexiglass
diffuser. Fluorescent tubes.
Panel
Domino
Grid
Aperture
L10
Mirror stainless steel and frosted
glass diffuser. Fluorescent tubes.
L40
Mirror stainless steel and
downlighters.
(EN81-70 non-compliant)
L18
Mirror stainless steel and plexiglass
diffuser. Fluorescent tubes.
L95
Mirror stainless steel and plexiglass
diffuser. Fluorescent tubes.
This style is also suitable for low
headroom cars.
Note: the panel is 600 x 600mm.
The appearance may differ
depending on the car size.
Options
BACK TO
CONTENTS
PREVIOUS
SECTION
NEXT
SECTION
XTRALIFT 2.0 – SECTION 2: CAR CEILINGS
Samples are available on request – please call: 01264 339090
The colours and designs reproduced in this document have been matched as closely as the
scanning and printing process will allow. It is recommended you obtain samples prior to final
specification. We are continually developing and improving our range of products and finishes
and we therefore reserve the right to alter or amend the specification without prior notice.
Car floors
Black Circles
Grey Circles
Stone
Light Wood
R24
R28
R60
R42
Black
Grey
Beige
G53
G54
G59
Aluminium
Steel
C03
C04
Altro Blue
Altro Grey
PVC flooring
Artificial granite
Metal plate
Antibacterial PVC
R11
BACK TO
CONTENTS
PREVIOUS
SECTION
R12
NEXT
SECTION
Please note:
Floors can be left recessed for
finishing by others.
XTRALIFT 2.0 – SECTION 3: CAR FLOORS
Car operating panel
Standard car operating panel†
240mm(w) x 1975/2075mm(h)
Satin stainless steel with dot matrix
position and direction of travel indicator
Push buttons†
Radius cornered squares 35 x 35mm
Satin stainless steel or mirror stainless steel
BACK TO
CONTENTS
PREVIOUS
SECTION
NEXT
SECTION
†
ADDITIONAL NOTES
XTRALIFT 2.0 – SECTION 4: CAR OPERATING PANELS
Landing controls & indicators
Landing operating panels†
80mm(w) x 230mm(h)
Satin stainless steel
Standard configurations
Single button collective.
Highest call-down
collective and fully
directional call
collective available.
Single button with
integrated LED display
standard at entry on
ground floor.
The LED display is
available as an option at
all subsequent landings.
BACK TO
CONTENTS
PREVIOUS
SECTION
NEXT
SECTION
†
ADDITIONAL NOTES
XTRALIFT 2.0 – SECTION 5: LANDING CONTROLS & INDICATORS
Mirrors and handrails
Mirrors
Handrails
P13 mirror stainless steel fitted as standard. EN81-70 compliant.
Additional colours are available on request.
P11 mirror stainless steel fitted as standard. EN81-70 non-compliant.
Additional colours are available on request.
Please note
Additional handrail finishes, including wooden,
are available as an option.
Half height, full width mirror fitted as standard
BACK TO
CONTENTS
PREVIOUS
SECTION
Full height and narrow options
available
NEXT
SECTION
XTRALIFT 2.0 – SECTION 6: MIRRORS AND HANDRAILS
Xtralift 2.0 standard specification
Lift car: fabricated steel lift car frame including
header assembly, platform buffer plates and
guide shoes with lubricators
Car & landing doors: finished in stainless steel
Doors: 2hr fire-rated doors in 800, 900 & 1000mm
width, 2000mm height
Communication options: EN81-28 compliant
autodialler
Motor drive type: gearless traction drive, MRL
Configuration: motor and rope anchorage points
mounted on the guides to reduce shaft wall
loadings
Rated speed: up to 1.6 m/s
Additional standard features:
• Overload weighing device
• Emergency lighting within lift car giving a
3hr duration
BACK TO
CONTENTS
PREVIOUS
SECTION
NEXT
SECTION
XTRALIFT 2.0 – SECTION 8: STANDARD SPECIFICATION
Example configuration 1
Flooring:
Black Circles (R24) PVC floor
Walls & skirting:
Silver grey (K11) vinyl skin plate with
satin stainless steel skirting
Handrail:
P13 mirror stainless steel standard
handrail
Car operating panel:
Standard mirror stainless steel
Ceiling:
Bubble (L11)
Stainless steel mirror finish and
plexiglass diffuser
Fluorescent tubes
BACK TO
CONTENTS
PREVIOUS
SECTION
NEXT PAGE
XTRALIFT 2.0 – SECTION 9: EXAMPLE CONFIGURATION 1
Example configuration 2
Flooring:
Stone (R37) PVC floor
Walls & skirting:
Redwood (1293) laminate with satin
stainless steel skirting
Handrail:
P13 mirror stainless steel standard
handrail
Car operating panel:
Standard mirror stainless steel
Ceiling:
Grid (L18)
Stainless steel mirror finish and
plexiglass diffuser
Fluorescent tubes
BACK TO
CONTENTS
PREVIOUS
SECTION
NEXT PAGE
XTRALIFT 2.0 – SECTION 9: EXAMPLE CONFIGURATION 2
Example configuration 3
Flooring:
Light Wood (R41) PVC floor
Walls & skirting:
Satin stainless steel (X02) skin plate
Handrail:
P13 mirror stainless steel standard
handrail
Car operating panel:
Standard mirror stainless steel
Ceiling:
Check (L16)
Stainless steel mirror finish and
plexiglass diffuser
Fluorescent tubes
BACK TO
CONTENTS
PREVIOUS
SECTION
NEXT PAGE
XTRALIFT 2.0 – SECTION 9: EXAMPLE CONFIGURATION 3
Example configuration 4
Flooring:
Black artificial granite (G53)
Walls & skirting:
Grey woodgrain laminate (1672),
Forest (AI1) glass image panel, satin
stainless steel skirting
Handrail:
P13 mirror stainless steel standard
handrail
Ceiling:
Custom specification
BACK TO
CONTENTS
PREVIOUS
SECTION
XTRALIFT 2.0 – SECTION 9: EXAMPLE CONFIGURATION 4
Additional notes
Additional notes – car operating panels
CAR OPERATING PANELS
• LCD position indicator
Available on the car operating panel as an option
• Push buttons
Schaefer push buttons are available on request
RETURN
TO PAGE
XTRALIFT 2.0 – ADDITIONAL NOTES – CAR OPERATING PANELS
Additional notes – landing controls & indicators
LANDING CONTROLS & INDICATORS
• There are an array of options within the display including LED or LCD. For further
details please contact us.
• The direction of lift travel is indicated by the direction indicator arrows in the car,
next to the door and visible from landing. We have a variety of digital display
indicators availabe as an option.
RETURN
TO PAGE
XTRALIFT 2.0 – ADDITIONAL NOTES – LANDING CONTROLS & INDICATORS
Stannah Lifts
Anton Mill, Andover, Hampshire SP10 2NX
Telephone: 01264 339090
www.stannahlifts.co.uk