CHARACTERISTICS
CHARACTERISTICS
Low attenuation.
AND
ADVANTAGES
OF
OPTICAL
FIBER
CABLES
ADVANTAGES
Long repeater spacings or
repeaterless networks.
Wide bandwidth.
Large transmission capacity with
simultaneous voice, data and video
transmission capabilities.
Immunity from electromagnetic
No shielding problems. No crosstalk.
interference.
Immunity from NEMP (nuclear
Ideal for high security applications.
electromagnetic pulses).
Non-conductive.
Transmitter and receiver electrically
isolated.
Non-inductive.
No danger of sparks from short
circuits. Perfect for use in hostile
environments.
Small size, small bending radius
Space efficient. Ease of installation
and light weight.
with resulting cost benefits.
Utilisation of existing duct systems.
P A G E
O N E
OPTICAL FIBER HAS
THE CAPACITY TO
TRANSMIT ALMOST
LIMITLESS AMOUNTS
OF INFORMATION
CONTENTS
3
Optical fiber cable product codes
4
Underground (duct) metallic
Single Mode optical fiber cable
5
Underground (duct) non-metallic
Single Mode optical fiber cable
STANDARD OPTICAL FIBER
CABLE PRODUCT CODES
6
Underground (direct buried)
metallic Single Mode optical
fiber cable
FIRST LETTER
F
Optical Fiber
7
SECOND LETTER FIRST SHEATH MATERIAL TYPE
Underground (direct buried)
non-metallic Single Mode
optical fiber cable
E
Polyethylene
R
Halogen-Free Flame Retardant
8
SUBSEQUENT LETTERS OTHER KEY CHARACTERISTICS
Underground (direct buried)
armoured Single Mode optical
fiber cable
F
Filled Cable
S
Metallic Moisture Barrier
B
Indoor Cable
core, LXE-Metallic sheath Single
M
Self-Supporting (Catenary) for Aerial Cable
Mode optical fiber cable
E
Polyethylene Outer Protective Sheath
D
Tape Armour
W
Wire Armour
N
Non-Metallic Cable
9
10
General purpose, Lightpack®
General purpose, Lightpack®
core, LXE-Dielectric sheath
Single Mode optical fiber cable
TRAILING NUMBER
11
Number of Fibers / Core Diameter /
Cladding Diameter
General purpose, Lightpack®
core, LXE-Rodent lightning
sheath Single Mode optical
EXAMPLES
fiber cable
FEFN/12/10/125 Polyethylene Sheathed, Filled,
Non-Metallic Cable with 12 Fibers with 10µm core
diameter and 125µm cladding diameter.
FEFSE/8 Polyethylene Inner Sheathed, Filled,
Metallic Moisture Barrier, Polyethylene Outer
Sheathed Cable with 8 Fibers.
(Based on Saudi Telecom Company MAT-1601
specification)
P A G E
T H R E E
UNDERGROUND
(DUCT)
METALLIC SINGLE MODE
OPTICAL FIBER CABLE
1.
Central Strength Member
5.
Wrapping Tape
9.
2.
Color Coded Fibers
6.
Identification Tape
10. Sheath Marking
3.
Color Coded Filled Loose Tubes
7.
Glass Yarn Strength Members
4.
Filled Interstices
8.
Aluminium Moisture Barrier
10
9
8
7
6
5
Polyethylene Sheath, Black
4
3
2
PRODUCT CODE
FEFS
TECH. SPEC. NO.
TS - 26000
1
SA.PTT
SM DUCT
APPLICATION
Single mode, optical fiber cables used in telecommunication network on trunk or inter-exchange routes. The cables are generally hauled
into ducts.
DESCRIPTION
Single mode color coded fibers, filled color coded loose tubes, MDPE fillers (if required), assembled around a non-metallic central strength
member (CSM), filled core, wrapped with dielectric tape, glass yarn strength members, aluminium polymer laminated tape and PE sheath,
DUCT METALLIC OPTICAL FIBER CABLE complying with STC MAT - 1601 Specification.
DUCT METALLIC CABLE
SCC
Product
No.
Fiber Count
Number of
Loose Tubes
200046
200047
200048
200049
200050
200051
200052
200053
200054
200941
200942
200943
200944
4
6
8
12
16
24
30
36
48
60
72
84
96
2
3
4
6
4
6
5
6
6
5
6
7
8
Number of
SM Fibers
Per Tube
2
2
2
2
4
4
6
6
8
12
12
12
12
Approx.
Outer Dia.
(mm)
12.5
12.5
12.5
12.5
13.0
13.0
14.5
14.5
14.5
14.5
14.5
16.0
16.0
Approx.
Net Wt.
(kgs/km)
Shipping
Length
(+5/-0m)
139
140
140
142
147
149
180
182
182
182
183
216
218
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
Reel Size
(Flange Dia.)
(mm)
1,700
1,700
1,700
1,700
1,700
1,700
1,900
1,900
1,900
1,900
1,900
2,000
2,000
* Other fiber count cable constructions and shipping lengths are available upon request.
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
CHARACTERISTICS
Optical
Mechanical
Environmental
Single mode fiber optimised at 1,310
and/or 1,550nm.
Pulling force (maximum): 2,000N
Operating temperature: -30°C, +70°C
Bending radius (minimum):
Full load - 20 x cable diameter
No load - 10 x cable diameter
Storage temperature:
Other fiber types/specifications can be
offered upon request.
S A U D I
P A G E
F O U R
C A B L E
C O M P A N Y
T E L E C A B L E
-20°C, +70°C
Installation temperature: -10°C, +60°C
D I V I S I O N
O P T I C A L
F I B E R
C A B L E
UNDERGROUND (DUCT) NON-METALLIC
SINGLE MODE OPTICAL FIBER CABLE
1.
Central Strength Member
5.
Wrapping Tape
2.
Color Coded Fibers
6.
Identification Tape
3.
Color Coded Filled Loose Tubes
7.
Glass Yarn Strength Members
4.
Filled Interstices
8.
Polyethylene Sheath, Black
9
8
9.
7
6
5
Sheath Marking
4
3
2
PRODUCT CODE
FEFN
TECH. SPEC. NO.
TS - 26000
1
SA.PTT
SM DUCT
APPLICATION
Single mode, optical fiber cables used in telecommunication network on trunk or inter-exchange routes. The cables are generally hauled
into ducts.
DESCRIPTION
Single mode color coded fibers, filled color coded loose tubes, MDPE fillers (if required), assembled around a non-metallic central strength
member (CSM), filled core, wrapped with dielectric tape, glass yarn strength members and PE sheath, DUCT NON-METALLIC OPTICAL
FIBER CABLE complying with STC MAT - 1601 Specification.
DUCT METAL FREE CABLE
SCC
Product
No.
Fiber Count
Number of
Loose Tubes
200055
200056
200057
200058
200059
200060
200061
200062
200063
200945
200946
200947
200948
4
6
8
12
16
24
30
36
48
60
72
84
96
2
3
4
6
4
6
5
6
6
5
6
7
8
Number of
SM Fibers
Per Tube
2
2
2
2
4
4
6
6
8
12
12
12
12
Approx.
Outer Dia.
(mm)
12.0
12.0
12.0
12.0
12.5
12.5
14.0
14.0
14.0
14.0
14.0
15.5
15.5
Approx.
Net Wt.
(kgs/km)
Shipping
Length
(+5/-0m)
118
118
119
120
125
127
156
157
158
158
159
191
193
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
Reel Size
(Flange Dia.)
(mm)
1,700
1,700
1,700
1,700
1,700
1,700
1,800
1,800
1,800
1,800
1,800
1,900
1,900
* Other fiber count cable constructions and shipping lengths are available upon request.
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
CHARACTERISTICS
Optical
Mechanical
Environmental
Single mode fiber optimised at 1,310
and/or 1,550nm.
Pulling force (maximum): 2,000N
Operating temperature:
-30°C, +70°C
Bending radius (minimum):
Full load - 20 x cable diameter
No load - 10 x cable diameter
Storage temperature:
-20°C, +70°C
Other fiber types/specifications can be
offered upon request.
Installation temperature: -10°C, +60°C
P A G E
F I V E
UNDERGROUND (DIRECT BURIED) METALLIC
SINGLE MODE OPTICAL FIBER CABLE
1.
Central Strength Member
5.
Wrapping Tape
9.
2.
Color Coded Fibers
6.
Identification Tape
10. Flooding Compound
3.
Color Coded Filled Loose Tubes
7.
Glass Yarn Strength Members
11. Outer Polyethlyene Sheath, Black
4.
Filled Interstices
8.
Aluminium Moisture Barrier
12. Sheath Marking
12
11
10
9
8
7
6
Inner Polyethylene Sheath
5
4
3
2
PRODUCT CODE
FEFSE
TECH. SPEC. NO.
TS - 26000
1
SA.PTT
SM
APPLICATION
Single mode, optical fiber cables generally used in telecommunication network on trunk or inter-exchange routes. The cables are used for
outdoor direct burial application.
DESCRIPTION
Single mode color coded fibers, filled color coded loose tubes, MDPE fillers (if required), assembled around a non-metallic central strength
member (CSM), filled core, wrapped with dielectric tape, glass yarn strength members, aluminium polymer laminated tape, PE inner and
outer sheath, DIRECT BURIED METALLIC OPTICAL FIBER CABLE complying with STC MAT - 1601 Specification.
DIRECT BURIED METALLIC CABLE
SCC
Product
No.
Fiber Count
Number of
Loose Tubes
200064
200065
200066
200067
200068
200069
200070
200071
200072
200949
200950
200951
200952
4
6
8
12
16
24
30
36
48
60
72
84
96
2
3
4
6
4
6
5
6
6
5
6
7
8
Number of
SM Fibers
Per Tube
2
2
2
2
4
4
6
6
8
12
12
12
12
Approx.
Outer Dia.
(mm)
15.0
15.0
15.0
15.0
15.0
15.0
16.0
16.0
16.0
16.5
16.5
18.0
18.0
Approx.
Net Wt.
(kgs/km)
Shipping
Length
(+5/-0m)
181
181
182
183
183
184
210
211
212
221
223
263
264
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
Reel Size
(Flange Dia.)
(mm)
1,900
1,900
1,900
1,900
1,900
1,900
2,000
2,000
2,000
2,000
2,000
2,100
2,100
* Other fiber count cable constructions and shipping lengths are available upon request.
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
CHARACTERISTICS
Optical
Mechanical
Environmental
Single mode fiber optimised at 1,310
and/or 1,550nm.
Pulling force (maximum): 1,000N
Operating temperature:
-30°C, +70°C
Bending radius (minimum):
Full load - 20 x cable diameter
No load - 10 x cable diameter
Storage temperature:
-20°C, +70°C
Other fiber types/specifications can be
offered upon request.
S A U D I
P A G E
S I X
C A B L E
C O M P A N Y
T E L E C A B L E
Installation temperature: -10°C, +60°C
D I V I S I O N
O P T I C A L
F I B E R
C A B L E
UNDERGROUND (DIRECT BURIED) NON-METALLIC
SINGLE MODE OPTICAL FIBER CABLE
1.
Central Strength Member
5.
Wrapping Tape
9.
2.
Color Coded Fibers
6.
Identification Tape
10. Outer Polyethylene Sheath, Black
3.
Color Coded Filled Loose Tubes
7.
Glass Yarn Strength Members
11. Sheath Marking
4.
Filled Interstices
8.
Inner Polyethlyene Sheath
11
10
9
8
7
6
5
Filling Compound
4
3
2
PRODUCT CODE
FEFNE
TECH. SPEC. NO.
TS - 26000
1
SA.PTT
SM
APPLICATION
Single mode, optical fiber cables generally used in telecommunication network on trunk or inter-exchange routes. The cables are for
outdoor direct burial application.
DESCRIPTION
Single mode color coded fibers, filled color coded loose tubes, MDPE fillers (if required), assembled around a non-metallic central
strength member (CSM), filled core, wrapped with dielectric tape, glass yarn strength members, PE inner and outer sheath, DIRECT
BURIED NON-METALLIC OPTICAL FIBER CABLE complying with STC MAT - 1601 Specification.
DIRECT BURIED METAL FREE CABLE
SCC
Product
No.
Fiber Count
Number of
Loose Tubes
200073
200074
200075
200076
200077
200078
200079
200080
200081
200953
200954
200955
200956
4
6
8
12
16
24
30
36
48
60
72
84
96
2
3
4
6
4
6
5
6
6
5
6
7
8
Number of
SM Fibers
Per Tube
2
2
2
2
4
4
6
6
8
12
12
12
12
Approx.
Outer Dia.
(mm)
14.0
14.0
14.0
14.0
14.0
14.0
16.0
16.0
16.0
16.0
16.0
17.5
17.5
Approx.
Net Wt.
(kgs/km)
Shipping
Length
(+5/-0m)
148
149
150
151
151
151
190
192
192
196
197
234
236
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
Reel Size
(Flange Dia.)
(mm)
1,800
1,800
1,800
1,800
1,800
1,800
2,000
2,000
2,000
2,000
2,000
2,100
2,100
* Other fiber count cable constructions and shipping lengths are available upon request.
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
CHARACTERISTICS
Optical
Mechanical
Environmental
Single mode fiber optimised at 1,310
and/or 1,550nm.
Pulling force (maximum): 1,000N
Operating temperature:
-30°C, +70°C
Bending radius (minimum):
Full load - 20 x cable diameter
No load - 10 x cable diameter
Storage temperature:
-20°C, +70°C
Other fiber types/specifications can be
offered upon request.
Installation temperature: -10°C, +60°C
P A G E
S E V E N
UNDERGROUND (DIRECT BURIED) ARMOURED
SINGLE MODE OPTICAL FIBER CABLE
1.
Central Strength Member
5.
Wrapping Tape
9.
2.
Color Coded Fibers
6.
Identification Tape
10. Corrugated Steel Tape
3.
Color Coded Filled Loose Tubes
7.
Glass Yarn Strength Members
11. Outer Polyethlyene Sheath, Black
4.
Filled Interstices
8.
Aluminium Moisture Barrier
12. Sheath Marking
12
11
9
10
8
7
6
Inner Polyethylene Sheath
5
4
3
2
PRODUCT CODE
FEFSDE
TECH. SPEC. NO.
TS - 26000
1
SA.PTT
SM
APPLICATION
Single mode, optical fiber cables generally used in telecommunication network on trunk or inter-exchange routes. The cables are used for
outdoor direct burial application.
DESCRIPTION
Single mode color coded fibers, filled color coded loose tubes, MDPE fillers (if required), assembled around a non-metallic central strength
member (CSM), filled core, wrapped with dielectric tape, glass yarn strength members, aluminium polymer laminated tape, PE inner sheath,
corrugated steel tape and PE outer sheath, DIRECT BURIED ARMOURED OPTICAL FIBER CABLE complying with STC MAT - 1601
Specification.
DIRECT BURIED ARMOURED CABLE
SCC
Product
No.
Fiber Count
Number of
Loose Tubes
200082
200083
200084
200085
200086
200957
200087
200088
200089
200090
200958
200959
200960
200961
4
6
8
12
16
20
24
30
36
48
60
72
84
96
2
3
4
6
4
5
6
5
6
6
5
6
7
8
Number of
SM Fibers
Per Tube
2
2
2
2
4
4
4
6
6
8
12
12
12
12
Approx.
Outer Dia.
(mm)
17.0
17.0
17.0
17.0
17.0
17.0
17.0
19.0
19.0
19.0
19.0
19.0
20.5
20.5
Approx.
Net Wt.
(kgs/km)
Shipping
Length
(+5/-0m)
248
249
249
250
250
251
251
304
305
305
305
306
350
352
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
4,000
4,000
Reel Size
(Flange Dia.)
(mm)
2,100
2,100
2,100
2,100
2,100
2,100
2,100
2,300
2,300
2,300
2,300
2,300
2,100
2,100
* Other fiber count cable constructions and shipping lengths are available upon request.
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
CHARACTERISTICS
Optical
Mechanical
Environmental
Single mode fiber optimised at 1,310
and/or 1,550nm.
Pulling force (maximum): 1,000N
Operating temperature:
-30°C, +70°C
Bending radius (minimum):
Full load - 20 x cable diameter
No load - 10 x cable diameter
Storage temperature:
-20°C, +70°C
Other fiber types/specifications can be
offered upon request.
S A U D I
P A G E
E I G H T
C A B L E
C O M P A N Y
T E L E C A B L E
Installation temperature: -10°C, +60°C
D I V I S I O N
O P T I C A L
F I B E R
C A B L E
GENERAL PURPOSE, LIGHTPACK® CORE, LXE-METALLIC
SHEATH SINGLE MODE OPTICAL FIBER CABLE
1.
2.
Fibers in Bundle(s) with Color
3.
Water Blocking Tape
6.
Sheath Rip Cords
Coded Marker Thread
4.
Corrugated ECCS Steel Tape
7.
Polyethylene Sheath, Black
Filled PBT Core Tube
5.
Steel Wire Strength Members
8.
Sheath Marking
8
7
6
5
4
3
2
PRODUCT CODE
LXE - ME
TECH.SPEC.NO.
TS - 38000
1
LXE-ME
APPLICATION
Single mode, Lightpack® Metallic Sheath (LXE-ME) Optical fiber cables generally used in telecommunication network on trunk or Inter-exchange routes
for underground Duct, Direct Buried, or Aerial applications. The cable conforms to the requirements of International Standards such as IEC 794-1,
Bellcore GR-20-CORE and REA Bulletin 1753F-601 (PE-90) for Optical, Mechanical and Environmental Characteristics.
DESCRIPTION
Single mode color coded fibers, filled central core tube, wrapped with a water blocking tape, corrugated ECCS steel tape armour, steel wire strength
members and PE sheath, Lightpack® Metallic sheath (LXE-ME) OPTICAL FIBER CABLE.
LIGHTPACK® METALLIC SHEATH
(LXE-ME) CABLE
SCC
Product
No.
Fiber Count
250001
250002
250003
250004
250005
250006
250007
250008
250009
250010
250011
250012
250013
250014
250015
250016
250017
250018
4
6
8
10
12
16
20
24
30
36
48
52
60
64
72
76
84
96
Nominal
Core Tube Dia.
(mm)
Approx.
Outer Dia.
(mm)
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
Approx.
Net Wt.
(kgs/km)
12.90
12.90
12.90
12.90
12.90
12.90
12.90
12.90
12.90
12.90
12.90
15.40
15.40
15.40
15.40
15.40
15.40
15.40
178
178
178
178
178
178
178
179
179
179
180
238
238
238
238
239
239
240
Shipping
Length
(+5/-0m)
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
Reel Size
(Flange Dia.)
(mm)
1,700
1,700
1,700
1,700
1,700
1,700
1,700
1,700
1,700
1,700
1,700
2,000
2,000
2,000
2,000
2,000
2,000
2,000
* Other fiber count cable constructions and shipping lengths are available upon request.
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
CHARACTERISTICS
Optical
Mechanical
Environmental
Single mode fiber optimised at 1,310
and/or 1,550nm.
Pulling force (maximum) : 2,700N
Operating temperature :
-40°C, +70°C
Bending radius (minimum) :
Full load - 20 x cable diameter
No load - 10 x cable diameter
Storage temperature :
-40°C, +75°C
Other fiber types/specifications can
be offered upon request.
Installation temperature : -30°C, +60°C
P A G E
LXE-ME is a trademark of Lucent Technologies and is manufactured by SCC-T under their licence.
N I N E
GENERAL PURPOSE, LIGHTPACK® CORE, LXE-DIELECTRIC
SHEATH SINGLE MODE OPTICAL FIBER CABLE
1.
2.
Fibers in Bundle(s) with Colour
3.
Water Blocking Tape
6.
Sheath Rip Cords
Coded Marker Thread
4.
Glass Roving Strength Members
7.
Polyethylene Sheath, Black
Filled PBT Core Tube
5.
Glass Rod Strength Members
8.
Sheath Marking
8
7
6
5
4
3
2
PRODUCT CODE
LXE - DE
TECH.SPEC.NO.
TS - 39000
1
LXE-DE
APPLICATION
Single mode, Lightpack® Dielectric Sheath (LXE-DE) Optical fiber cables generally used in telecommunication network on trunk or Inter-exchange
routes for underground Duct, Direct Buried, or Aerial applications. The cable conforms to the requirements of International Standards such as IEC
794-1, Bellcore GR-20-CORE and REA Bulletin 1753F-601 (PE-90) for Optical, Mechanical and Environmental Characteristics.
DESCRIPTION
Single mode color coded fibers, filled central core tube, wrapped with a water blocking tape, Non-Metallic glass strength members and PE sheath,
Lightpack® Dielectric sheath (LXE-DE) OPTICAL FIBER CABLE.
LIGHTPACK® DIELECTRIC SHEATH
(LXE -DE) CABLE
SCC
Product
No.
Fiber Count
250019
250020
250021
250022
250023
250024
250025
250026
250027
250028
250029
250030
250031
250032
250033
250034
250035
250036
4
6
8
10
12
16
20
24
30
36
48
52
60
64
72
76
84
96
Nominal
Core Tube Dia.
(mm)
Approx.
Outer Dia.
(mm)
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
Approx.
Net Wt.
(kgs/km)
12.90
12.90
12.90
12.90
12.90
12.90
12.90
12.90
12.90
12.90
12.90
15.40
15.40
15.40
15.40
15.40
15.40
15.40
151
151
151
151
151
151
151
151
152
152
152
207
207
208
208
208
209
209
Shipping
Length
(+5/-0m)
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
Reel Size
(Flange Dia.)
(mm)
1,700
1,700
1,700
1,700
1,700
1,700
1,700
1,700
1,700
1,700
1,700
2,000
2,000
2,000
2,000
2,000
2,000
2,000
* Other fiber count cable constructions and shipping lengths are available upon request.
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
CHARACTERISTICS
Optical
Mechanical
Environmental
Single mode fiber optimised at 1,310
and/or 1,550nm.
Pulling force (maximum) : 2,700N
Operating temperature :
-40°C, +70°C
Bending radius (minimum) :
Full load - 20 x cable diameter
No load - 10 x cable diameter
Storage temperature :
-40°C, +75°C
Other fiber types/specifications can
be offered upon request.
S A U D I
P A G E
C A B L E
C O M P A N Y
T E L E C A B L E
T E N
LXE-DE is a trademark of Lucent Technologies and is manufactured by SCC-T under their licence.
Installation temperature : -30°C, +60°C
D I V I S I O N
O P T I C A L
F I B E R
C A B L E
GENERAL PURPOSE, LIGHTPACK® CORE, LXE-RODENT
LIGHTNING SHEATH SINGLE MODE OPTICAL FIBER CABLE
1.
2.
Fibers in Bundle(s) with Colour
3.
Water Blocking Tape
6.
Sheath Rip Cords
Coded Marker Thread
4.
Corrugated Stainless Steel Tape
7.
Polyethylene Sheath, Black
Filled PBT Core Tube
5.
Steel Wire Strength Members
8.
Sheath Marking
8
7
6
5
4
3
2
PRODUCT CODE
LXE - RL
TECH.SPEC.NO.
TS - 40000
1
LXE-RL
APPLICATION
Single mode, Lightpack® Rodent-lightning sheath (LXE-RL) Optical fiber cables generally used in telecommunication network on trunk or
inter-exchange routes for underground Duct, Direct Buried, or Aerial applications. The cable conforms to the requirements of International Standards
such as IEC 794-1, Bellcore GR-20-CORE and REA Bulletin 1753F-601 (PE-90) for Optical, Mechanical and Environmental Characteristics.
DESCRIPTION
Single mode color coded fibers, filled central core tube, wrapped with a water blocking tape, corrugated stainless steel tape armour, steel wire
strength members and PE sheath, Lightpack® Rodent-Lightning sheath (LXE-RL) OPTICAL FIBER CABLE.
LIGHTPACK® RODENT-LIGHTNING
SHEATH (LXE-RL) CABLE
SCC
Product
No.
Fiber Count
250037
250038
250039
250040
250041
250042
250043
250044
250045
250046
250047
250048
250049
250050
250051
250052
250053
250054
4
6
8
10
12
16
20
24
30
36
48
52
60
64
72
76
84
96
Nominal
Core Tube Dia.
(mm)
Approx.
Outer Dia.
(mm)
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
Approx.
Net Wt.
(kgs/km)
12.90
12.90
12.90
12.90
12.90
12.90
12.90
12.90
12.90
12.90
12.90
15.40
15.40
15.40
15.40
15.40
15.40
15.40
175
175
175
175
176
176
176
176
177
177
177
229
229
230
230
230
231
231
Shipping
Length
(+5/-0m)
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
Reel Size
(Flange Dia.)
(mm)
1,700
1,700
1,700
1,700
1,700
1,700
1,700
1,700
1,700
1,700
1,700
2,000
2,000
2,000
2,000
2,000
2,000
2,000
* Other fiber count cable constructions and shipping lengths are available upon request.
The information given in this leaflet is correct to the best of our knowledge and given in good faith, however the right is reserved to make alterations without prior notice.
CHARACTERISTICS
Optical
Mechanical
Environmental
Single mode fiber optimised at 1,310
and/or 1,550nm.
Pulling force (maximum) : 2,700N
Operating temperature :
-40°C, +70°C
Bending radius (minimum) :
Full load - 20 x cable diameter
No load - 10 x cable diameter
Storage temperature :
-40°C, +75°C
Other fiber types/specifications can
be offered upon request.
Installation temperature : -30°C, +60°C
P A G E
LXE-RL is a trademark of Lucent Technologies and is manufactured by SCC-T under their licence.
E L E V E N