Page 1
Laboratory Furniture
Laboratory Benches / C-Frame System
C-Frames form the skeleton of the Laboratory Benches. It carries the load of the
equipment on the benches so that it does
not have to be carried by the under bench
cabinets. A C-Frame is made from hollow
sections of 30 x 60 x 2 mm and kiln dried at
200 °C after being painted with an anti-acid
epoxy paint.
Laboratory Benches
4
Under Bench Cabinets are suspended from
the C-Frames or placed on the floor in case
of mobile or Pedestal cabinets. The big advantage of this C-Frame is that the frames
carry all the weight. It allows easy removal of
cabinets and back panels to access the services running behind it, without the need to
remove everything from the table top. The
length of the C-Frames vary between 450
and 1800 mm. These modular sizes make it
possible to create benches of all kinds of
sizes
The frame height including legs is 720 mm for sitting type benches, and 870 mm for standing type
benches.
EXE
C-Frames
Front view
Depths
Front view
Depths
C-Frame (Height 750 mm, installed against Wall)
600 mm
750 mm
900 mm
C-Frame (Height 900 mm, installed against Wall)
600 mm
750 mm
MARKT 34A
3131CR VLAARDINGEN
THE NETHERLANDS
900 mm
OFFICE: +31—(0) 10 23 43 080
FAX: +31—(0) 10 46 02 930
info@enlabinternational.com
Page 2
Laboratory Furniture
The bench can be placed against a separate
energy panel. This can be as wall bench or
as island bench. The back side are designed
so that they can be mounted to the energy
panel. It makes it possible to disconnect
these benches to gain access to the backside or to make major changes.
Areas underneath benches without cabinets
are normally used as kneeholes (sitting
spaces). The backside of these parts are
covered with metal panels. If mobile type
cabinets are used the complete backside of
the bench will be covered by metal panels.
This gives a cleaner look, especially when
services are running behind the back panels.
If the side of the table is exposed (end of
wall bench or both ends on an island bench)
they will also be covered by metal panels to
hide the services running through the service panels.
Laboratory Benches
4
Laboratory Benches / C-Frame System
EXE
Depths
Front view
Depths
C-Frame (Height 750 mm, Panel Mounted)
750 mm
800 mm
900 mm
C-Frame (Height 900 mm, Panel Mounted)
750 mm
800 mm
MARKT 34A
3131CR VLAARDINGEN
THE NETHERLANDS
900 mm
OFFICE: +31—(0) 10 23 43 080
FAX: +31—(0) 10 46 02 930
info@enlabinternational.com
C-Frames
Front view
Page 3
Laboratory Furniture
4
Laboratory Benches / C-Frame System
Laboratory Benches
Areas underneath benches without
cabinets are normally used as kneeholes (sitting spaces). The backside
of these parts are covered with
metal panels.
C-Frames
EXE
If mobile type cabinets are used the
complete backside of the bench will
be covered by metal panels. This
gives a cleaner look, especially
when services are running behind
the back panels. If the side of the
table is exposed (end of wall bench
or both ends on an island bench)
they will also be covered by metal
panels to hide the services running
through the service panels.
Sitting space panels and side covering panels of the benches with Pedestal cabinet, which don’t have CFrames, are fixed directly to the
cabinets which are different than the
other types panels. The width and
the height varies with the size of the
bench.
C-Frame – Height 750 mm - Panels for sitting spaces and side coverings
Widths / Depths
750 mm
800 mm
900 mm
C-Frame – Height 900 mm - Panels for sitting spaces and side coverings
Widths / Depths
750 mm
800 mm
MARKT 34A
3131CR VLAARDINGEN
THE NETHERLANDS
900 mm
OFFICE: +31—(0) 10 23 43 080
FAX: +31—(0) 10 46 02 930
info@enlabinternational.com
Page 4
Laboratory Furniture
4
Laboratory Benches / C-Frame System
Materials
Frames have leg supports made of hard PVC. The height of these support
can be adjusted between -10/+20 mm to compensate for uneven areas in
the floor.
The Panels for sitting spaces and side covers are made of galvanized iron
sheet and kiln dried at 200 °C after the surface cl eaning and painting with
anti-acid epoxy.
Colour
The horizontal and vertical parts of the C-Frame are dark grey (RAL 7040)
Sitting space and side covering panels are light grey (RAL 7047)
Sitting Work Height ………….
Height Setting Tolerance ……
Depth (Wall mounted)…..……
Depth (Panel mounted )……..
Length ……………………..….
:
:
:
:
:
720 mm
(-10) / (+ 20) mm
540 / 700 / 850 mm
640 / 690 / 790 mm
450 / 500 / 600 / 750 / 900 / 1000 /
1200 / 1350 / 1500 / 1800 mm
Standing Work Height ……….
Height Setting Tolerance ……
Depth (Wall mounted)…..……
Depth (Panel mounted )……..
Length ……………………..….
:
:
:
:
:
870 mm
(-10) / (+ 20) mm
540 / 700 / 850 mm
640 / 690 / 790 mm
450 / 500 / 600 / 750 / 900 / 1000 /
1200 / 1350 / 1500 / 1800 mm
:
:
:
:
430 / 580 mm
450 / … / 1800 mm
570 / 720 mm
100 / 150 / 250 mm
:
:
:
:
720 / 870 mm
450 / … / 1800 mm
720 / 870 mm
50 / 200 / 350 mm
Sizes
C-Frame Legs
Middle Panel Heights …….….
Middle Panel Lengths ……….
Side Panel Heights .………….
Side Panel Widths …………...
Pedestal Benches
Middle Panel Heights …….….
Middle Panel Lengths ……….
Side Panel Heights .………….
Side Panel Widths …………...
MARKT 34A
3131CR VLAARDINGEN
THE NETHERLANDS
OFFICE: +31—(0) 10 23 43 080
FAX: +31—(0) 10 46 02 930
info@enlabinternational.com
EXE
Technical Specifications
The horizontal and vertical parts are produced from 40x60x2 mm rectangular hollow sections, kiln dried at 200 °C after cle aning the surface and painting with anti-acid epoxy.
Laboratory Benches
TECHNICAL SPECIFICATIONS FOR C- FRAMES