Spec Sheet

advertisement
PROJECT INFORMATION
MILLENIUM METREX™
Job Name
Fixture Type
METESW SERIES
Catalog Number
PRODUCT FEATURES:
Approved by
»» Surface wall mount – Single Face
»» Indirect LED with life up to 50,000 hours
»» Cooler operation and simpler testing protocol
SPECIFICATIONS
HOUSING: High impact, injection molded polycarbonate. Housing provided with canopy mounting and wireway drill points top and side – see Cross Section/Details. Closed cell die-cut Neoprene
gasket seals housing to canopy.
SHIELD: UV-stabilized, high impact, injection molded clear polycarbonate. Nominal thickness .120". Corrosion resistant Phillips head fasteners secure shield to housing. Continuous closed cell
silicone gasket seals shield to housing.
LEGEND: Legend illuminated by internal high output LEDs. Lettering height and stroke determined by legend option. Polycarbonate red or green filter panels. Stencil is 18-gauge laser cut steel with
TGIC polyester powder coat finish to match housing.
ELECTRICAL: 624 nm Red, or 527 nm Green LED light source. Electrical components mounted to removable high impact, injection molded polycarbonate chassis. Drill points provided for optional
conduit entry.
OPTIONS: Sealed nickel-cadmium Emergency Battery Pack (EL) with standard deep cycle battery conditioning, self test and self diagnostic circuitry, remote laser activated test switch, protected
mechanical test switch and status indicator. Provides 120 minutes of emergency operation. The Emergency Battery Pack (EL) is suitable for 10°C to 45°C (50°F to 113°F). Cold Weather Emergency
Battery Pack (CEL) suitable for -45°C to 45°C (-49°F to 113°F).
INSTALLATION: Standard four-point mounting required for Peace of Mind Guarantee .
LISTINGS: UL and CUL listed for Wet Location. UL certified IP64 per IEC 60598. Meets or exceeds UL924 and NFPA 101 standards. Meets or exceeds CSA and NRCAN requirements. NSF2 Splash/
Non-Food Zone.
LED
IP64
UL
924
NFPA
101
ORDERING INFORMATION (Ex: METESW-MW-R-REF-DT)
Model
Finish
Legend Color
Legend Options
Voltage
Options
Accessories
METESW
Finish
MB Matte Black
MW Matte White
Legend Options
RSC AREA OF RESCUE ASSISTANCE (with symbol of Accessibility)
REFA AREA OF REFUGE (with symbol of Accessibility)
REF AREA OF REFUGE
STA STAIRS (with field adjustable directional indicators)
Legend Color
RRed
GGreen
Voltage
DT 120/277 Volts
DTC 120/347 Volts
Options
CEL Cold Weather Emergency Battery Pack
EL Standard Emergency Battery Pack
XAC Auxiliary AC Supply (matches voltage selection)
XDC Auxiliary DC Supply (6-24 volts)
TR* Tamper Resistant Torx® with center pin Fasteners
Accessories
LP Laser Pointer
9500Torx® with center pin Screwdriver
*n/a with NSF2 listing
DIMENSIONAL DATA
BASEPLATE MOUNTING VIEW
14.00"
3.27"
7.00"
8.80"
4.00"
(4) .31" Mounting Holes
.875" Dia. Hole
CHARACTER HEIGHT CHART
RSC- Area of Rescue Assistance
1.63
REFA- Area of Refuge
1.63
REF - Area of Refuge
2.00
STA- Stairs
3.00
See appropriate building codes for viewing distance and
mounting height of signage based on the character height listed.
www.kenall.com
P: 800-4-Kenall
F: 847-360-1781
1020 Lakeside Drive Gurnee, Illinois 60031
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers,
and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.
Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2014 Kenall Mfg. Co. All rights reserved.
METESW-010214
Download