DATE:TYPE: One/Two Circuit Trak Rail and Components FIRM NAME: PROJECT: For conversion to millimeters, multiply inches by 25.4 Not to Scale Live-end (AKTEF) with wire cover (AKTWC) at one end of run 31⁄8" 4" TRAK HOUSING: 48" Constructed of .065 heavy extruded aluminum. Housing is low profile at 3/4” high by 11/2” wide. Thermoplastic extruded insulator with two #12 solid copper buses on each side. Contains two (2) 20A (2400 watts) rated 120V circuits. Each 1920 watts based on National Electrical Code loading capacity. Each circuit has a dedicated neutral for control isolation. The system can be wired to one circuit with two wires, two circuits with three wires, or two circuits with four wires. Baked enamel finish available in black, white, or Zet (metallic silver). ArchiTrak is listed for dry locations only; it is not suitable for damp or wet locations. 31⁄8" 40" 4" 48" 44" 4" 31⁄8" 4" Stems available in 18" or custom lengths 12' Rail Overall length with Power Feed: 12'-31⁄8" 44" 32" 4" FEATURES: 8' Rail Overall length with Power Feed: 8'-31⁄8" 32" Can be field cut at 90° in any length without modification to bussing (Do not cut rail less than 8” in length) 31⁄8" 4" 40" Toggle bolts are provided with each Trak rail (2’ and 4’ = two toggle bolts, 6’ and 8’ = three toggle bolts,12’ = four toggle bolts) for gypsum or plaster mount applications 11/2” 4" 6' Rail Overall length with Power Feed: 6'-31⁄8" 4" Neutral 1 4' Rail Overall length with Power Feed: 4'-31⁄8" 31⁄8" 4" Supplied with one end cap /4” Neutral 2 3 CKT2 CKT1 20" All ArchiTrak rails, and components can be vertically mounted, except the wand components. 2' Rail Overall length with Power Feed: 2'-31⁄8" LABELS: CSA NRTL/C Listed Dry location only Ground bus 2 Circuit Identification 4" One/Two Circuit CATALOG NUMBER: EXAMPLE: AKT4 TRAK RAIL TRAK RAIL COMPONENTSCOMPONENTSCOMPONENTSCOMPONENTS ❑AKT2 ❑AKT6 ❑ AKTEF BL ❑ AKTEF WH ❑ AKTEF Z ❑ AKTIL BL ❑ AKTIL WH ❑ AKTIL Z ❑ AKTSL BL ❑ AKTSL WH ❑ AKTSL Z ❑ AKTT BL ❑ AKTT WH ❑ AKTT Z ❑ AKTX BL ❑ AKTX WH ❑ AKTF BL ❑ AKTF WH ❑ AKTF Z 24” One/Two Circuit Trak Rail ❑AKT4 48” One/Two Circuit Trak Rail 72” One/Two Circuit Trak Rail ❑AKT8 96” One/Two Circuit Trak Rail ❑AKT12 144" One/Two Circuit Trak Rail A Division of Hubbell Lighting, Inc. ❑ AKTCF BL ❑ AKTCF WH ❑ AKTCF Z ❑ AKTMP BL ❑ AKTMP WH ❑ AKTMP Z ❑ AKTW BL ❑ AKTW WH ❑ AKTW Z ❑ AKTCC BL ❑ AKTCC WH ❑ AKTPA BL ❑ AKTPA WH ❑ AKTFF BL ❑ AKTFF WH ❑ AKTFF Z ❑ AKTEC BL ❑ AKTEC WH ❑ AKTEC Z ❑ AKTCSK BL ❑ AKTCSK WH ❑ AKTCSK Z ❑ AKTTBC Z ❑ AKTWC WH ❑ AKTEF BL ❑ AKTEF WH ❑ AKTEF Z ❑ AKTPFCC BL ❑ AKTPFCC WH ❑ AKTPFCC Z ❑ AKTPFC BL ❑ AKTPFC WH ❑ AKTPFC Z In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Web: www.prescolite.com • Tech Support: (888) 777-4832 ❑ AKTTSK BL ❑ AKTTSK WH ❑ AKTTSK Z ❑ AKTW BL ❑ AKTW WH ❑ AKTW Z (specify length) ATRK-021 ArchiTrak Trak Rail and Components /64” 5 31/8” 11/2” 11/2” 11/2” AKTEF Live-End Joiner 3” AKTIL Straight Mini-Joiner • Finish: black (BL), white (WH) or Zet (Z, metallic silver) • Specify a live-end joiner for top feed electrical connections from a recessed outlet box. It can also be top fed directly with cable. • Finish: black (BL), white (WH) or Zet (Z, metallic silver) • Specify the straight mini-joiner to mechanically and electrically couple any two trak lengths in a straight line. Add .078” (2mm) for the straight mini-joiner when calculating overall trak lengths. 11/2” 8” 47/16” 41/2” AKTSL Straight/L Joiner 11/2” AKTT T Joiner • Finish: black (BL), white (WH) or Zet (Z, metallic silver) • Specify the straight/L joiner to mechanically and electrically couple any two trak lengths in a straight line or L 90° configuration. Supplied with separate straight and L covers. • Finish: black (BL), white (WH) or Zet (Z, metallic silver) • Specify the T joiner to mechanically and electrically couple any three trak lengths in a T configuration. 11/2” 11/2” 31/8” 47/16” 51/2” AKTX X Joiner AKTF Flex Joiner • Finish: black (BL) or white (WH) • Specify the X joiner to mechanically and electrically couple any four trak lengths in an X configuration. @ • Finish: black (BL), white (WH) or Zet (Z, metallic silver) • Specify the flex joiner to mechanically and electrically couple any two trak lengths to create angles from 0° to 90°. The flex joiner can be flexed in either horizontal or vertical planes. 85/8” 11/2” 31/8” AKTCC Live-End Joiner w/Cord 31/8” 90° AKTCF Conduit End Joiner • Finish: black (BL), white (WH) or Zet (Z, metallic silver) • Specify the conduit end joiner when utilizing conduit to provide the electrical connection. 13/8” 41/4” 5” /8” 7 • Finish: black (BL) or white (WH) • Specify the live-end joiner when temporary or portable trak hookup is required. • Supplied with a 10’ SPT-2 105 C 3/c 16 AWG flexible cord with NEMA 5-15P grounding plug. 5” AKTTBC T-bar Mounting Clips AKTWC Wireway Cover • Finish: Chrome only • Specify for installation for T-Bar ceilings. Four clips per package. Constructed of .5mm tempered and plated SK5 steel. /16” 7 • Finish: White (WH) only • For enclosing wiring from stem to power feed at stem power feed location. 5” AKTMP Mono-Point Adaptor AKTPA Pendant Adaptor • Finish: black (BL) or white (WH) • For single fixture mounting without the use of trak rails. Mounts over a twogang box. • Finish: black (BL) or white (WH) • For use of pendant or cord hung luminaires (by others). Maximum weight: 25 lbs. 41/4” AKTFF Floating Feed AKTPFCC Outlet Box Cover Plate • Finish: black (BL), white (WH) or Zet (Z, metallic silver) • Specify the cover plate with any power joiner with a recessed junction box. /4” AKTEC End Cap /16” 15 45/8” 45/8” AKTPFC Power Feed Cover 11/2” • Finish: black (BL), white (WH) or Zet (Z, metallic silver) • For single run installation of floating canopy joiner runs. Two per package. • Finish: black (BL), white (WH) or Zet (Z, metallic silver) • For T-Bar installations with any power joiner. 41/2” 1” AKTW Wand Component • Finish: black (BL), white (WH) or Zet (Z, metallic silver) • Specify for pendant mount ArchiTrak fixtures below trak rail. •Lengths: See 12” = AKTW12 Lengths 24” = AKTW24 36” = AKTW36 48” = AKTW48 13/8” /8” 3 AKTCSK Canopy Mount Stem Kit AKTTSK T-Bar Mount Stem Kit 1.15” • Finish: black (BL), white (WH) or Zet (Z, metallic silver) 18” • Specify for suspension applications of Standard ArchiTrak rail system below finished ceiling. Two stems per kit. • Length: 18” standard Contact factory for custom lengths. 4.46” AKTSPA Sloped Ceiling Adapter Kit • Finish: black (BL), white (WH) or Zet (Z, metallic silver) • Use with AKTCSK(Sold Seperately) • Will susbend track from ceiling up to 45°. 11/4” 17/16” Web: www.prescolite.com • 21/4” • Finish: black (BL), white (WH) or Zet (Z, metallic silver) • For electrical connection anywhere along the length of the trak. Mounts over a two-gang box and can be connected to one or two circuits. 3 33/16” 11/2” 13/8” Tech Support: (888) 777-4832 701 Millennium Boulevard • Greenville, SC 29607 U.S.A. • Phone (864) 678-1000 Copyright ©2014 Prescolite, Inc., a division of Hubbell Lighting, Inc. All Rights Reserved Specifications subject to change without notice. • Printed in U.S.A. • ATRK-021• 11/19/14 25/8”