THE OLDAKER DIFFERENCE .
THE NEEDLE TIP SAFETY SERIES
THE REPLACEMENT SAFETY SERIES
TAPERED
STRAIN
RELIEF
NICKLE PLATED
THREADED
BRASS TIP
STAINLESS STEELE
THREADED NEEDLE
TIP WITH POLISHED
POINT
HEAVY DUTY WIRE
20,000 VOLTS BREAKDOWN
5,000 VOLTS WORKING.
MOLDED FLAME
RETARDANT
PLASTIC WITH
SAFETY RING
506
MOLDED FLAME
RETARDANT
PLASTIC WITH
SAFETY RING
ACCESSORIES ARE
RECESSED FOR
ADDED SAFETY
9 LEAF SPRING
FOR ADDED
CONTACT
SURFACE
ACCESSORIES ARE
RECESSED FOR
ADDED SAFETY
HEAVY DUTY WIRE
20,000 VOLTS BREAKDOWN
5,000 VOLTS WORKING.
THE WIRE DIFFERENCE
Notice the wire shown on the left, which is used on our test leads, has many more
strands than the wire shown on the right. The difference enables our wire to carry
more current and amps safely, and is not easily broke. Also the wire we use has
EDPM Rubber insulation which stays more consistent in different temperature
ranges, the other wire uses PVC insulation which becomes very stiff in cooler
temperatures. Oldaker standard lead length is 4' most others are 2' to 3'.
THE “OTHER” WIRE
OLDAKER WIRE
THE PROBE DIFFERENCE
Notice the probes on the right use tips that are all nickel plated brass with small
safety rings, all accessories, if any, must slide onto the small .080" diameter pin,
which is not safe or secure. Oldaker probes (Shown on the left) use stainless steel
needle tips with very sharp polished points for piercing insulation and sure contact,
the tips are threaded so all accessories can be securely attached to the tip for
better contact and safety. Also the tips are recessed so that the area where the
accessory connects to the probe tip is inside the probe to prevent the user from
shock. The material used for the probe is ABS, V094 Flame Retardant plastic. The
safety rings are 3/4" and well positioned on the probe to keep the user from the
exposed tip.
THE “OTHER” PROBE
OLDAKER PROBE
VALUE ADDED FROM OLDAKER DISTRIBUTORS
IF YOU HAVE A NEED FOR ANY SPECIAL LEADS OR CABLES THAT ARE NO LONGER AVAILABLE FROM THE MANUFACTURER, OR IF YOU HAVE A NEW DESIGN
YOU NEED MADE. LET OLDAKER DISTRIBUTORS HELP. CHECK FROM OUR LIST OF CAPABILITIES.
SPECIAL CAPABILITIES INCLUDE :
* CUSTOM DESIGN AND MANUFACTURING OF TEST LEADS OR WIRING DEVICES.
* ASSEMBLY OF COMPLEX UNITS, BOTH ELECTRICAL & MECHANICAL.
* PACKAGING.
* RESISTANCE SOLDERING.
MACHINE CAPABILITIES INCLUDE :
* 5 INJECTION MOLDING MACHINES (.5 TO 3 OZ.) BOTH HORIZONTAL & VERTICAL WITH SHUTTLE TABLES.
* AUTOMATIC WIRE CUTTING & STRIPPING.
* LIGHT PUNCH PRESSES.
* LATHES.
* HANDSCREW MACHINES.
* DRILL PRESSES.
OLDAKER MFG. CORP.
* BANDSAWS.
301 NORTH MAIN ST.
* AUTOMATIC SCREW MACHINES, (SINGLE & 5 SPINDLE).
DUNKIRK OHIO 45836
* MILLING MACHINES.
TEL : (419) 759-3551
* WELDING EQUIPMENT (ELECTRIC & GAS).
FAX : (419) 759-3312
* SHEET METAL SHEARS.
E-MAIL : ream@testleads.net
* BEND BRAKES.
Oldaker
TEL : (419) 759-3551
www.testleads.net
FAX : (419) 759-3312
"TEST WITH THE BEST"
PRODUCT INDEX
ACCESSORIES
ADAPTORS & ADAPTOR LEADS
BNC LEADS
BREAKOUT LEADS
BULK WIRE & CABLE
CLIP LEADS
CLIPS
COIL CORD TEST LEADS
CONNECTORS
DOUBLE PLUG ADAPTORS
FLEXIBLE PROBE TEST LEADS
FUSE HOLDER
FUSED TEST LEADS
HOOK LEADS
HOOKS
JUMPER LEADS
LEAD BENDER
LEAD HOLDER
MICRO ADAPTORS
MINIATURE TEST LEADS
PART NUMBER INDEX
PLUGS & JACKS
PROBES
PROBE TIPS
RETRACTABLE TEST LEADS
SCOPE PROBES
SHORTING PLUG
SILICONE TEST LEADS
SOLDERING ACCESSORIES
SPECIALTY LEADS
STACKABLE TEST LEADS
TELEPHONE STYLE LEADS & ACCESSORIES
TEST LEAD KITS
TEST LEAD SETS
10 13 15 18 19 20
13 20 24
7 8 15 16 17
15 16
26
11 12
15 18 19 20 21
5 13 26
23 24
16 17 24
5
24
6
8 9 11 13 16
15 21 22
7 14 15
24
10
8 13 15
4 8 10 13
27
22 23 24
6 7 8 9 10 18 23 24
24
6
25
24
5689
25
7 10 13 16
11 13 14
11 19 20
6 7 8 9 10 22
4 5 6 10
INFORMATION
All Oldaker products are guaranteed, claims of defective material must be made within 10 days of shipment. . .
Oldaker will not be liable for damages, loss or expenses arising in connection with the sale, resale, use of,
or the inability to use its products for anything other than its purpose. . .
All products are shipped in zip polybags or plastic pouch.
Any products to be returned must be authorized by Oldaker or Oldaker Distributors.
IF YOU DON'T SEE IT IN THE OLDAKER CATALOG. ASK FOR IT FROM
YOUR OLDAKER DISTRIBUTOR. WE MAY BE ABLE TO HELP.
FOR A COMPLETE UP TO DATE CROSS REFERENCE
CHECK OUR WEBSITE AT www.testleads.net.
PAGE 3
Oldaker
TEL : (419) 759-3551
STANDARD JACK
STANDARD PLUG
PART NUMBER AND OTHER PLUG STYLES.
SLOTTED JACK
FITS SIMPSON
260 METERS
RECESSED
STANDARD
PLUG .312”
RECESSED
STANDARD
PLUG .380”
RECESSED
STANDARD
PLUG .360”
RECESSED
STANDARD
SHORT PLUG
518-7
518-6
518-20
518-21
518-22
STANDARD JACK
RECESSED STANDARD
PLUG 518-2
518-8
.080” PIN PLUG
RETRACTABLE STANDARD
PLUG
518-9
518-1
STANDARD PLUG
.080” PIN PLUG
518
518-10
518-5
"TEST WITH THE BEST"
FAX : (419) 759-3312
NEEDLE TIP SERIES
SAFETY LEAD
RATED 1,000 VOLTS 10 AMPS
THIS LEAD USES
NEEDLE TIPS
www.testleads.net
518-11
MINI PLUG
MINI .105”
JACK
519
519-1
STACKABLE STANDARD
PLUG
518-3
MINI
RECESSED
PLUG
519-2
The TIP on this lead is made of .080" Dia. X 5/8" long stainless steel with a polished point for insulation piercing. Threaded 8-32 for attachments. (Nickel plated).
The PROBE is 5" molded flame retardant ABS plastic with 3/4" safety ring. .
NOTE: MINI LEADS USE 20 ga. WIRE
The WIRE is 18 ga. (65x36) tinned copper stranding, rubber insulation .145" Dia. 20KV breakdown 5KV working.
(41 X 36) TINNED COPPER STRANDING
Standard length is 4 feet, Sold as Sets 1 Red and 1 Black.
.105" DIA. LEAD LENGTH 3.5'
RATED 1,000 VOLTS 10 AMPS
STANDARD REPLACEMENT SERIES
SAFETY LEAD
RECESSED
STANDARD
PLUG .312”
SLOTTED JACK
FITS SIMPSON
260 METERS
STANDARD JACK
486-7
486-6
581
THIS LEAD
INCLUDES
THREADED
CLIPS
RECESSED STANDARD
PLUG
STANDARD JACK
.080” PIN PLUG
486-3
486-15
486-2
STANDARD PLUG
486-16
486-5
SLIM-LINE SERIES
TEST LEAD
THIS LEAD USES
NEEDLE TIPS
RECESSED
STANDARD
PLUG .360”
486-20
486-21
RETRACTABLE STANDARD
PLUG
486-18
MINI PLUG
476-4
495-1
The TIP on this lead is made of .080" Dia. X 1/2" long brass tip threaded 8-32 for attachments. (Nickel plated). . .
The PROBE is 4" molded flame retardant ABS plastic with 3/4" safety ring. .
The WIRE is 18 ga. (65x36) tinned copper stranding, rubber insulation .145" Dia. 20KV breakdown 5KV working.
Standard length is 4 feet, Sold as Sets 1 Red and 1 Black. Includes clips.
RATED 1,000 VOLTS 10 AMPS
RECESSED
STANDARD
PLUG .380”
MINI .105”
JACK
.080” PIN PLUG
STANDARD PLUG
582
PART NUMBER AND OTHER PLUG STYLES.
RECESSED
STANDARD
SHORT PLUG
486-22
STACKABLE STANDARD
PLUG
486-17
MINI
RECESSED
PLUG
513
NOTE: MINI LEADS USE 20 ga. WIRE
(41 X 36) TINNED COPPER STRANDING
.105" DIA. LEAD LENGTH 3.5'
PART NUMBER AND OTHER PLUG STYLES.
SLOTTED JACK
FITS SIMPSON
260 METERS
RECESSED
STANDARD
PLUG .312”
RECESSED
STANDARD
PLUG .380”
RECESSED
STANDARD
PLUG .360”
RECESSED
STANDARD
SHORT PLUG
596-7
586-1
586-20
586-21
586-22
RECESSED STANDARD
PLUG
597-2
.080” PIN PLUG
STANDARD JACK
596-4
596-2
STANDARD JACK
STANDARD PLUG
596-6
596-5
RETRACTABLE STANDARD
PLUG
596-8
STANDARD PLUG
596-1
STACKABLE STANDARD
PLUG
596-3
.080” PIN PLUG
#10 LUG
596
594
The TIP on this lead is made of .080" Dia. X 5/8" long stainless steel with a polished point for insulation piercing. Threaded 8-32 for attachments. (Nickel plated).
The PROBE is 4.25” slim-line .340 dia. molded flame retardant ABS plastic with non slip ribs and no safety ring. .
The WIRE is 18 ga. (65x36) tinned copper stranding, rubber insulation .145" Dia. 20KV breakdown 5KV working. .Standard length is 4 feet, Sold as Sets 1 Red and 1 Black.
RATED 1,000 VOLTS 10 AMPS
SLIM-LINE MINI SERIES
TEST LEAD
THIS LEAD USES
NEEDLE TIPS
PART NUMBER AND OTHER PLUG STYLES.
THIS LEAD
INCLUDES
THREADED
CLIPS
MINI .105”
JACK
476-16
MINI PLUG
476-14
MINI
RECESSED
PLUG
476-15
The TIP on this lead is made of .080" Dia. X 1/2" long brass tip threaded 8-32 for attachments. (Nickel plated). . .
The PROBE is 3” slim-line mini .340" dia. molded flame retardant ABS plastic with non slip ribs and no safety ring. .
The WIRE is 20 ga. (41x36) tinned copper stranding, rubber insulation .105" Dia. 10KV breakdown 2KV working.
Standard length is 3.5 feet, Sold as Sets 1 Red and 1 Black. Includes clips.
PAGE 4
Oldaker
TEL : (419) 759-3551
RECESSED
STANDARD
PLUG .312”
RECESSED
STANDARD
PLUG .380”
619
620
STANDARD JACK
619-20
.080” PIN PLUG
RECESSED
STANDARD
SHORT PLUG
619-21
619-22
RETRACTABLE STANDARD
PLUG
663
662
RECESSED
STANDARD
PLUG .360”
RATED 1,000 VOLTS 10 AMPS
THIS LEAD USES
NEEDLE TIPS
THESE LEADS
USE RUBBER
WIRE
STACKABLE STANDARD
PLUG
615-11
617
STANDARD PLUG
615
STANDARD JACK
STANDARD PLUG
FLEXIBLE PROBE
.080” PIN PLUG
RECESSED STANDARD
PLUG
664
618
"TEST WITH THE BEST"
FAX : (419) 759-3312
NEEDLE TIP FLEXIBLE SERIES
SAFETY LEAD
PART NUMBER AND OTHER PLUG STYLES.
SLOTTED JACK
FITS SIMPSON
260 METERS
www.testleads.net
665
616
The TIP on this lead is made of .080" Dia. X 5/8" long stainless steel with a polished point for insulation piercing. Threaded 8-32 for attachments. (Nickel plated). . .
The PROBE is 5" molded P.V.C plastic with 3/4" safety ring. .
The WIRE is 18 ga. (65x36) tinned copper stranding, RUBBER insulation .145" Dia. 20KV breakdown 5KV working.
Standard length is 4 feet, Sold as Sets 1 Red and 1 Black.
PART NUMBER AND OTHER PLUG STYLES.
SLOTTED JACK
FITS SIMPSON
260 METERS
RECESSED
STANDARD
PLUG .312”
RECESSED
STANDARD
PLUG .380”
RECESSED
STANDARD
PLUG .360”
RECESSED
STANDARD
SHORT PLUG
774-7
774-6
774-20
774-21
774-22
STANDARD JACK
.080” PIN PLUG
774-1
774-9
RATED 1,000 VOLTS 10 AMPS
NEEDLE TIP FLEXIBLE SILICONE SERIES
SAFETY LEAD
RETRACTABLE STANDARD
PLUG
THIS LEAD USES
NEEDLE TIPS
THESE LEADS
USE SILICONE
WIRE
STACKABLE STANDARD
PLUG
774-11
774-3
STANDARD PLUG
FLEXIBLE PROBE
774
STANDARD PLUG
STANDARD JACK
.080” PIN PLUG
RECESSED STANDARD
PLUG
774-5
774-8
774-10
774-2
The TIP on this lead is made of .080" Dia. X 5/8" long stainless steel with a polished point for insulation piercing threaded 8-32 for attachments. (Nickel plated). . .
The PROBE is 5" molded P.V.C. plastic with 3/4" safety ring. .
The WIRE is 18 ga. (440x002) copper stranding, SILICONE insulation .145" Dia. -100C to +300c, 20KV breakdown 5KV working.
Standard length is 4 feet, Sold as Sets 1 Red and 1 Black.
RATED 1,000 VOLTS 10 AMPS
COIL CORD SERIES
TEST LEAD
PART NUMBER AND OTHER PLUG STYLES.
STANDARD JACK
773-4
SLOTTED JACK
FITS SIMPSON
260 METERS
RECESSED
STANDARD
PLUG .312”
RECESSED
STANDARD
PLUG .380”
773-7
773-6
773-20
RECESSED
STANDARD
SHORT PLUG
RECESSED
STANDARD
PLUG .360”
773-22
773-21
STANDARD PLUG
STANDARD PLUG
773-5
STANDARD JACK
RECESSED STANDARD
PLUG
THIS LEAD USES
NEEDLE TIPS
773-1
773-2
773
The TIP on this lead is made of .080" dia. X 5/8" stainless steel with a polished point for insulation piercing.
Threaded 8-32 for attachments (nickel plated).
The PROBE is 5" long molded flame retardant ABS plastic with 3/4" safety ring. .
The WIRE is 18 ga. (65x36) neoprene retractable coil cord 1 foot retracted, 5 foot extended. . .
These leads are Sold as Sets 1 Red and 1 Black.
PART NUMBER AND OTHER PLUG STYLES.
STANDARD JACK
776-8
SLOTTED JACK
FITS SIMPSON
260 METERS
776-4
RECESSED
STANDARD
PLUG .312”
776-3
2 CONDUCTOR COIL CORD SERIES
TEST LEAD
RECESSED
STANDARD
PLUG .380”
RECESSED
STANDARD
PLUG .360”
RECESSED
STANDARD
SHORT PLUG
776-22
776-21
776-20
STANDARD PLUG
776-2
STANDARD PLUG
776
RECESSED STANDARD
PLUG
776-1
STANDARD JACK
776-6
RETRACTABLE STANDARD
PLUG
776-5
The TIP on this lead is made of .080" Dia. X 1/2" long brass tip. Threaded 8-32 for attachments. (Nickel
plated). . .
The PROBE is 4" molded flame retardant ABS plastic with 3/4" safety ring. .
The WIRE is 2 conductors of 24 ga. (21 x 36) tinned copper stranding with .220" O.D. Coil size 5/8" 1 foot
retracted 5 foot extended.
This lead has 2 wires in one coil and is very useful where there is a need for coil cord but not the tangles
(1 coil cord, 2 test leads).
PAGE 5
6” WIRE LENGTH
18 GA. WIRE
12” WIRE LENGTH
18 GA. WIRE
Oldaker
TEL : (419) 759-3551
www.testleads.net
ADJUSTABLE NEEDLE TIP SERIES
SAFETY LEAD
RATED 1,000 VOLTS 10 AMPS
PART NUMBER AND OTHER PLUG STYLES.
RECESSED
STANDARD
PLUG .312”
SLOTTED JACK
FITS SIMPSON
260 METERS
763
RECESSED STANDARD STANDARD JACK
PLUG
763-9
RECESSED
STANDARD
PLUG .360”
RECESSED
STANDARD
SHORT PLUG
763-21
763-22
763-20
RETRACTABLE STANDARD
PLUG
STANDARD JACK
.080” PIN PLUG
763-1
763-2
RECESSED
STANDARD
PLUG .380”
763-6
763-7
STANDARD PLUG
"TEST WITH THE BEST"
FAX : (419) 759-3312
763-8
763-11
STACKABLE STANDARD
PLUG
763-3
REPLACEMENT TIP 623-4
STANDARD PLUG
REPLACEMENT PROBE 763-30 (COLOR)
NOTE : NO ATTACHMENTS
CAN BE USED WITH THIS LEAD
.080” PIN PLUG
763-10
763-5
The TIP on this lead is made of .025" Dia. stainless steel with a polished point and is adjustable to 3.5" and is fully insulated to the point.
The PROBE is .312" dia. X 5.25" long molded ABS plastic with .385" dia. safety ring. .
The WIRE is 18 ga. (65x36) tinned copper stranding, rubber insulation .145" Dia. 20KV breakdown 5KV working.
Standard length is 4 feet, Sold as Sets 1 Red and 1 Black lead.
RATED 1,000 VOLTS 10 AMPS
DELUXE SERIES
TEST LEAD KIT
STANDARD JACK
767-8
PACKAGED IN
REUSABLE POUCH
PART NUMBER AND OTHER PLUG STYLES.
SLOTTED JACK
FITS SIMPSON
260 METERS
RECESSED
STANDARD
PLUG .312”
RECESSED
STANDARD
PLUG .380”
RECESSED
STANDARD
PLUG .360”
RECESSED
STANDARD
SHORT PLUG
767-7
767-6
767-20
767-21
767-22
STANDARD PLUG
STANDARD PLUG
767-5
767-1
.080” PIN PLUG
.080” PIN PLUG
767-11
STACKABLE STANDARD
PLUG
767-10
767-9
RETRACTABLE STANDARD
PLUG
STANDARD JACK
RECESSED STANDARD
PLUG
767-2
767
KIT INCLUDES, SCREW-ON
HOOKS - CLIPS - LUGS
TIP PROTECTORS
TIP EXTENSIONS
767-3
The TIP on this lead is made of .080" X 5/8" stainless steel with a polished point for insulation piercing, threaded 8-32 for attachments shown above.
The PROBE is .312" dia. X 5.25" long molded ABS plastic with .385" dia. safety ring. .
The WIRE is 18 ga. (65x36) tinned copper stranding, rubber insulation .145" Dia. 20KV breakdown 5KV working.
Standard length is 4 feet, Sold as Sets 1 Red and 1 Black lead, includes 2 each of the accessories shown above and is packaged in a reusable plastic pouch.
FUSED SERIES
SAFETY LEAD
250 VOLT ½ AMP SUPPLIED
WITH LEAD
SLOTTED JACK
FITS SIMPSON
260 METERS
FUSE TO PLUG
LEAD LENGTH 5”
782-16
STANDARD JACK
782-3
RECESSED STANDARD
PLUG
782-2
PART NUMBER AND OTHER PLUG STYLES.
RECESSED
STANDARD
PLUG .312”
RECESSED
STANDARD
PLUG .380”
RECESSED
STANDARD
PLUG .360”
782-6
782-20
782-21
782-15
STANDARD JACK
782-5
782-7
782-22
RETRACTABLE STANDARD
PLUG
.080” PIN PLUG
STANDARD PLUG
RECESSED
STANDARD
SHORT PLUG
STACKABLE STANDARD
PLUG
782-11
782-17
STANDARD PLUG
.080” PIN PLUG
782
782-1
The TIP on this lead is made of .080" Dia. X 1/2" long brass tip threaded 8-32 for attachments. (Nickel plated). . .
The PROBE is 4" molded flame retardant ABS plastic with 3/4" safety ring. .
The WIRE is 18 ga. (65x36) tinned copper stranding, rubber insulation .145" Dia. 20KV breakdown 5KV working.
Standard length is 4 feet, Sold as Sets 1 Red and 1 Black lead.
2568 FUSED SAFETY TEST LEAD KIT (600 VOLTS)
REPLACEMENT FUSE
PART # 2568-1
PACKAGED IN
REUSABLE POUCH
SILICONE WIRE
RETRACTABLE
TIP COVERS
RECESSED STANDARD
PLUG
MODULAR PROBE HANDLE
HOUSES 600 VOLT FUSE
(INCLUDED)
2568-2
This fused safety test lead kit has a replaceable 600 volt fuse housed in each of the probe
handles which have a pointed 4 MM plug style tip with retractable tip cover.
The PROBE is 4" molded Nylon plastic with safety ring and retractable tip covers.
The WIRE is 18 ga. (65x36) tinned copper stranding, SILICONE insulation .145" Dia..
Standard length is 4 feet, sold with 600 volt fuses included. Replacement Fuse Part # 2568-1
PAGE 6
SLOTTED JACK
FITS SIMPSON
260 METERS
2568-5
STANDARD PLUG
2568-4
RECESSED
STANDARD
PLUG .312”
2568
STANDARD PLUG
2568-3
OTHER PLUG STYLES
Oldaker
TEL : (419) 759-3551
www.testleads.net
"TEST WITH THE BEST"
FAX : (419) 759-3312
833 MINI CLIP LEAD KIT
833-1 ALLIGATOR CLIP LEAD KIT
2 EACH OF 5 DIFFERENT
COLORS, RED, WHITE,
YELLOW, GREEN & BLACK
(10 LEADS)
1 EACH OF 5 DIFFERENT
COLORS, RED, WHITE,
YELLOW, GREEN & BLACK
(5 LEADS)
This is a good quality lead for the money and very useful for most
handymen, this lead includes 1 each of 5 different colored, 24 ga. Wire,
1 foot long. Has clips and boots on both ends.
This is a good quality lead for the money and very useful for most
handymen, this lead includes 2 each of 5 different colored, 24 ga. Wire,
2 foot long. Has mini clips and boots on both ends.
PART NUMBER AND OTHER PLUG STYLES.
STANDARD PLUG
SLOTTED JACK
FITS SIMPSON
260 METERS
STANDARD JACK
660-10
660-8
RECESSED
STANDARD
PLUG .312”
660-11
.080” PIN PLUG
660-12
660-21
660-20
RECESSED STANDARD
PLUG
660-22
660
STANDARD JACK
.080” PIN PLUG
STANDARD PLUG
660-6
660-4
660-3 NEEDLE TIP
RECESSED
STANDARD
PLUG .360”
RECESSED
STANDARD
PLUG .380”
660-9
RECESSED
STANDARD
SHORT PLUG
RATED 1,000 VOLTS 10 AMPS
MODULAR SERIES
SAFETY TEST LEAD KIT
660-1 LUG
RETRACTABLE STANDARD
PLUG
660-5
660-2 HOOK
660-14
577-5 TIP
458-3 CLIP
STACKABLE STANDARD
PLUG 660-7
491A PLUG
REUSABLE
POUCH
<< PRESS-ON ACCESSORIES
This lead has a standard banana plug recessed into the probe handle to allow all of the accessories shown above to plug directly into the probe handle.
The PROBE is 4" molded flame retardant ABS plastic with 3/4" safety ring. .
The WIRE is 18 ga. (65x36) tinned copper stranding, rubber insulation .145" Dia. 20KV breakdown 5KV working.
Standard length is 4 feet, sold as Sets 1 Red and 1 Black lead, includes 2 each of the accessories shown above and is packaged in a reusable plastic pouch.
PAK - 5
TEST LEAD KIT
539B PLUGS
USED IN PAK-5B
537 LEAD
538 PROBES
458-1 CLIPS
PACKAGED IN
REUSABLE POUCH
520 LUGS
#10
497-3 HOOKS
539 PLUGS
USED IN PAK-5
623 EXTENSION TIPS
This lead features the ability to directly thread all accessories to both ends of the lead and eliminates accidental disconnection. All attachments recess into molded
connectors to help reduce the possibility of shock. This lead consists of two 4' leads with threaded connectors on both ends, includes 1 Red and 1 Black of all
accessories shown above and is packaged in a reusable plastic pouch. The wire used on this lead is a heavy duty 18 ga. 65 x 36 tinned copper stranding .145"
O.D. Rubber insulation. NOTE: To order PAK-5 Kit with recessed plugs use part number PAK-5B.
BNC MODULAR
SAFETY TEST LEAD KIT
539B PLUGS
USED IN BNC-B
538 PROBES
458-1 CLIPS
520 LUGS
#10
497-3 HOOKS
539 PLUGS
USED IN BNC
623 EXTENSION TIPS
PACKAGED IN
REUSABLE POUCH
598
CABLE LEAD
This lead features the ability to directly thread all accessories to the end of the lead and eliminates accidental disconnection. All attachments recess into molded
connectors to help reduce the possibility of shock. The lead comes as you see it above with 1 red and 1 black of all the accessories shown above and is enclosed in
a reusable plastic pouch. The BNC lead (598) uses 3' of RG/58 CU shielded cable with 19 x .0071 tinned copper stranding center conductor, .195" O.D. PVC
insulation. Rated 50 ohms, 1900 volts, color black, the connector wire is 7” of 18 ga. 65 x 36 tinned copper stranding .145" O.D. Rubber insulation. NOTE: to order
BNC Kit with recessed plugs (539B) order BNC-B Kit.
PAGE 7
Oldaker
TEL : (419) 759-3551
www.testleads.net
"TEST WITH THE BEST"
FAX : (419) 759-3312
BNC / DUAL PLUG MICRO ADAPTER KIT
598 KIT USES RG/58 CABLE
490 KIT USES RG/174 CABLE
506 KIT USES RG/58 CABLE
877 KIT USES RG/174 CABLE
24 Ga.
7” LONG
CABLE LENGTH
3 FEET
CABLE LENGTH
3 FEET
24 Ga.
7” LONG
4256 HOOK
.025”
SOCKET
4379 CLIP
4359 HOOK
4258 HOOK
.025”
SOCKET
These adapter kits allow micro accessories to be used with BNC or Dual Plug Cables both RG/58 and RG/174. A new method of connecting IC's, test points, wire
wrap pins, terminals and other miniature components to BNC RG/58 or RG/174 cable, using a .025” Square Socket Connection. You have your choice of either
BNC or Dual plug on one end and includes 1 red 4379 clip, 1 red 4359 pico hook, 1 black 4258 micro hook, 1 black 4256 pincer hook. To order BNC RG/58 Kit use
part # 598 Kit. To order BNC RG/174 Kit use part # 490 KIT, For Dual Plug RG/58 Kit use part # 506 Kit. To order Dual Plug RG/174 Kit use Part # 877 Kit.
MICRO ADAPTER TEST LEAD KITS
THESE KITS USE A .025” SQUARE SOCKET AND PIN CONNECTION
4379
C
4262
LEAD SET
42
43
59
LIP
4262-1
LEAD SET
58
HO
OK
HO
OK
42
56
K
O
HO
793 KIT
793-1 KIT
TYPICAL APPLICATION
793 KIT
TYPICAL APPLICATION
793-1 KIT
These micro adapter kits allow accessories that were once reserved for scopes and scope probes to be used with standard test meters and is a new method of
connecting IC's, test points, wire wrap pins, terminals and other miniature components to standard leads. The lead (4262) for 793 kit, presses onto any test lead
with a .080" dia. Probe tip, and allows the user to attach any of the micro hooks or clips to the end of any standard lead set. The lead (4262-1) for 793-1 kit, allows
the user to attach micro accessories to either end. The set includes 1 red, 1 black 4262 lead adapter, 1 red 4379 clip, 1 red 4359 pico hook, 1 black 4258 micro
hook, 1 black 4256 pincer hook.
954-1 MODULAR TEST LEAD KIT
954 MODULAR TEST LEAD KIT
769-6S 6’
SILICONE
LEAD SET
PACKAGED IN
REUSABLE POUCH
944-3 CLIP
769-6S 6’
SILICONE
LEAD SET
PACKAGED IN
REUSABLE POUCH
946 PROBE
This test lead kit shown above is recommended for electrical, industrial and HVAC
applications. The 954 kit comes with 944-3 Clip Probes, 946 Probe Handles and
769-6S 6’ with Silicone Insulation, and Shrouded Right Angle 4mm Plugs on each
end. Kit is packaged in a reusable plastic pouch. Rated 1,000 volts / 20 amp.
This test lead kit shown above is recommended for electrical, industrial and HVAC
applications. The 954-1 kit comes with 944-1 Clamp Probes, 946 Probe Handles
and 769-6S 6’ with Silicone Insulation, and Shrouded Right Angle 4mm Plugs on
each end. Kit is packaged in a reusable plastic pouch. Rated 1,000 volts / 20 amp.
954-3 MODULAR TEST LEAD KIT
954-2 MODULAR TEST LEAD KIT
769-6S 6’
SILICONE
LEAD SET
769-6S 6’
SILICONE
LEAD SET
944-4 HOOK
946 PROBE
944-1 CLAMP
PACKAGED IN
REUSABLE POUCH
PACKAGED IN
REUSABLE POUCH
946 PROBE
944-2 PIN PROBE
This test lead kit shown above is recommended for electrical, industrial and HVAC
applications. The 954-2 kit comes with 944-4 Hook Probes, 946 Probe Handles and
769-6S 6’ with Silicone Insulation, and Shrouded Right Angle 4mm Plugs on each
end. Kit is packaged in a reusable plastic pouch. Rated 1,000 volts / 20 amp.
946 PROBE
This test lead kit shown above is recommended for electrical, industrial and HVAC
applications. The 954-3 kit comes with 944-2 Pin Probes, 946 Probe Handles and
769-6S 6’ with Silicone Insulation, and Shrouded Right Angle 4mm Plugs on each
end. Kit is packaged in a reusable plastic pouch. Rated 1,000 volts / 20 amp.
PAGE 8
Oldaker
TEL : (419) 759-3551
956 TEST LEAD KIT
www.testleads.net
"TEST WITH THE BEST"
FAX : (419) 759-3312
1501 ECONOMY ELECTRONIC LEAD KIT
956-1 TEST LEAD KIT
RUBBER WIRE
RUBBER WIRE
SILICONE WIRE
PLASTIC
POUCH
PLASTIC
POUCH
946 PLUG TIP PROBES
946 PLUG TIP PROBES
949-1 CLIPS
963 CLIPS
769-2S 6’
946 PLUG TIP PROBES
667-2
LEAD SET
667-3
LEAD SET
513-27 HOOK LEAD
1500 SUPER ELECTRONIC LEAD KIT
968 TEST LEAD KIT
660-1 LUG
PLASTIC
POUCH
1510 SUPER INDUSTRIAL AUTOMOTIVE KIT
SILICONE WIRE
SILICONE WIRE
SILICONE WIRE
PLASTIC
POUCH
PLASTIC
POUCH
769-2S 6’
LEAD SET
949-1 CLIPS
949-1 CLIPS
769-2S 6’
769-2S 6’
PLASTIC
POUCH
660-1 LUGS
963 CLIPS
949-1 CLIPS
946 PLUG
TIP PROBES
946 PROBES
4359 HOOK
4256 HOOK
949-2 LOW
PROFILE CLIPS
4262-2 MICRO LEADS
946 PLUG TIP PROBES
963 MINI CLIPS
660-1 LUGS
513-27 HOOK LEADS
944-3
CLIP
PROBES
1520 SUPER DELUXE TELECOM LEAD KIT
944-3
CLIP PROBES
992-1 HEAVY DUTY HOOKS WITH NEEDLE
958 DELUXE TEST LEAD KIT
SILICONE WIRE
SILICONE WIRE
769-2S 6’
LEAD SET
PLASTIC
POUCH
949-1 CLIPS
949-1 LARGE CLIPS
769-2S 6’
PLASTIC
POUCH
946 PLUG TIP PROBES
944-1
CLAMP
PROBES
963 CLIPS
946 PLUG TIP PROBES
LEFT TO RIGHT
944-1 CLAMP PROBES
944-3 CLIP PROBES
944-2 PIN PROBES
944-4 HOOK PROBES
820 TELE. CLIPS
660-1 LUGS
521-1 ADAPTERS
513-27 HOOK LEADS
1521 ECONOMY TELECOM TEST LEAD KIT
1511 ECONOMY INDUSTRIAL / AUTOMOTIVE LEAD KIT
SILICONE WIRE
769-2S 6’
LEAD SET
SILICONE WIRE
PLASTIC POUCH
769-2S 6’
LEAD SET
PLASTIC POUCH
949-1 CLIPS
521-1 PLUG
ADAPTOR (RED)
949-1 CLIPS
946 BANANA PLUG TIP PROBES
660-1 LUGS
992-1 HOOK WITH NEEDLE
RED ONLY
820 TELEPHONE
TYPE CLIP (RED)
PAGE 9
660-1 LUGS
946 BANANA PLUG TIP PROBES
Oldaker
TEL : (419) 759-3551
www.testleads.net
"TEST WITH THE BEST"
FAX : (419) 759-3312
2536 TEST LEAD KIT
518-26 TEST LEAD KIT
PLASTIC
POUCH
PLASTIC
POUCH
667-3
LEAD SET
518-6
RECESSED PLUGS
WITH NEEDLE TIP
PROBES
SCREW-ON
40 AMP
BLACK CLIP
20 AMP
BATTERY
CLIP SET
945
PIN PROBES
518-28 TEST LEAD KIT
518-27 TEST LEAD KIT
PLASTIC
POUCH
PLASTIC
POUCH
STRAIGHT RECESSED
PLUGS WITH RED
NEEDLE TIP PROBE
AND 40 AMP BLACK CLIP
518-2
STRAIGHT RECESSED
PLUGS WITH NEEDLE
TIP PROBES
SCREW-ON
40 AMP
CLIP SET
997-1 TEST LEAD KIT
997 TEST LEAD KIT
532-2
LEAD SET
532-2
LEAD SET
PLASTIC
POUCH
946
PROBES
944-4
RED HOOK
946
PROBES
944-4
RED HOOK
458-4
ALLIGATOR
CLIP SET
458-4
ALLIGATOR
CLIP SET
660-1
LUGS
PLASTIC
POUCH
660-1
LUGS
876 TEST LEAD HOLDER
814 MINI HOOK LEAD
814-1 (LENGTH & COLOR)
INCLUDES HOOK
ON ONE END ONLY.
This mini lead uses 24 ga. Miniature test lead wire ( 45 x 40 ) tinned copper
stranding with rubber insulation .066" Dia. Colors available red, black,
green, white & yellow. Standard lengths are 8", 12", 24", 36". Sold by color
& length. Other lengths are available upon request.
This test lead holder measures 5.250" wide by 3" high and has 6 slots 3.250"
deep for leads, the holder also has 2 screw holes for wall mounting. Color is blue.
PAGE 10
Oldaker
TEL : (419) 759-3551
www.testleads.net
FAX : (419) 759-3312
"TEST WITH THE BEST"
TELEPHONE STYLE CLIP LEADS
PART NUMBER AND OTHER PLUG STYLES.
SLOTTED JACK
FITS SIMPSON
260 METERS
STANDARD JACK
STANDARD PLUG
812-5
812-10
RECESSED
STANDARD
PLUG .312”
RECESSED
STANDARD
PLUG .380”
RECESSED
STANDARD
PLUG .360”
RECESSED
STANDARD
SHORT PLUG
812-6
812-20
812-21
812-22
812-7
STANDARD PLUG
812-1
RECESSED STANDARD
PLUG
812-12
812-4
812-3
812-8
812-14
RETRACTABLE STANDARD
PLUG
812-11
MINI
RECESSED
PLUG
MINI PLUG
MINI .105”
JACK
.080” PIN PLUG
.080” PIN PLUG
STANDARD JACK
812-2
TELEPHONE CLIP
812-16
STACKABLE STANDARD
PLUG 812-13
THIS HEAVY DUTY CLIP HAS
A SINGLE PENETRATING PIN
FOR INSULATION PIERCING,
ALSO HAS A CLUSTER OF
NOTHING ON END
NEEDLES ALONG WITH
812-9
ANGLED JAW.
812
This lead has a telephone style clip & boot on one end with a single penetrating pin for insulation piercing and a cluster of hardened needles for a sure connection
on groups of wires, also has an angled jaw for hard to reach areas. The other end has various type connections to fit any meter or connection. The wire on
standard leads is 18 ga. (65 x 36) tinned copper stranding .145" O.D. RUBBER insulation. Mini leads use 20 ga. (41 x 36) tinned copper stranding .120" O.D.
RUBBER insulation. All standard leads are available in SILICONE wire (440 x .002) copper stranding .145" O.D. To order silicone just add "S" to the part number.
Stocked length is 4 foot for standard leads, 3.5" for mini leads. These leads are sold as Sets 1 Red and 1 Black.
HOOK SERIES LEADS
PART NUMBER AND OTHER PLUG STYLES.
STANDARD PLUG
STANDARD JACK
513-9
513-10
STANDARD PLUG
513-16
SLOTTED JACK
FITS SIMPSON
260 METERS
RECESSED
STANDARD
PLUG .312”
513-11
513-12
RECESSED STANDARD
PLUG
STANDARD JACK
.080” PIN PLUG
548
513-13
.080” PIN PLUG
MINI PLUG
513-15
513-25
513-14
RECESSED
STANDARD
PLUG .380”
RECESSED
STANDARD
PLUG .360”
513-20
513-21
513-22
RETRACTABLE STANDARD
PLUG
513-17
MINI
RECESSED
PLUG
RECESSED
STANDARD
SHORT PLUG
STACKABLE STANDARD
PLUG
513-18
HOOK
NOTHING ON END
513-19
513-1
513-26
This lead has a 2.5" hook on one end which is made of molded nylon and gold plated hook with various other connections on the other end to
fit any type of meter or connection. The wire on standard leads is 18 ga. (65 x 36) tinned copper stranding .145" O.D. RUBBER insulation.
Mini leads use 20 ga. (41 x 36) tinned copper stranding .120" O.D. RUBBER insulation. All standard leads are available in SILICONE wire
(440 x .002) copper stranding .145" O.D. To order silicone just add "S" to the part number. Stocked length is 4 foot for standard leads, 3.5" for
mini leads. These leads are sold as Sets 1 Red and 1 Black.
EXTENDED HOOK STYLE LEADS
PART NUMBER AND OTHER PLUG STYLES.
STANDARD PLUG
SLOTTED JACK
FITS SIMPSON
260 METERS
STANDARD JACK
813-5
813-10
813-7
STANDARD PLUG
813-1
RECESSED STANDARD
PLUG
STANDARD JACK
RECESSED
STANDARD
PLUG .360”
RECESSED
STANDARD
SHORT PLUG
813-6
813-20
813-21
813-22
.080” PIN PLUG
813-4
MINI
RECESSED
PLUG
MINI PLUG
813-8
813-12
RECESSED
STANDARD
PLUG .380”
813-3
813-2
.080” PIN PLUG
RECESSED
STANDARD
PLUG .312”
RETRACTABLE STANDARD
PLUG
813-11
813-15
NOTHING ON END
EXTENDED HOOK
813-14
STACKABLE STANDARD
PLUG
813-9
813
This lead has a 4.5" hook on one end which is made of molded nylon and gold plated hook with various other connections on the other end to
fit any type of meter or connection. The wire on standard leads is 18 ga. (65 x 36) tinned copper stranding .145" O.D. RUBBER insulation. Mini
leads use 20 ga. (41 x 36) tinned copper stranding .120" O.D. RUBBER insulation. All standard leads are available in SILICONE wire (440 x
.002) copper stranding .145" O.D. To order silicone just add "S" to the part number. Stocked length is 4 foot for standard leads, 3.5" for mini
leads. These leads are sold as Sets 1 Red and 1 Black, single leads of different lengths can be ordered separately.
PART NUMBER AND OTHER PLUG STYLES.
STANDARD PLUG
527-5
STANDARD JACK
527-9
SLOTTED JACK
FITS SIMPSON
260 METERS
527-7
STANDARD PLUG
527-1
.080” PIN PLUG
RECESSED STANDARD
PLUG
527-2
STANDARD JACK
527-3
STACKABLE SERIES TEST LEADS
RECESSED
STANDARD
PLUG .312”
RECESSED
STANDARD
PLUG .380”
RECESSED
STANDARD
PLUG .360”
RECESSED
STANDARD
SHORT PLUG
527-6
527-20
527-21
527-22
.080” PIN PLUG
527-4
RETRACTABLE STANDARD
PLUG
527-10
STACKABLE STANDARD
PLUG
527
NOTHING ON END
527-11
527-8
This lead has a molded polyethelene stackable standard plug on one end with various other connections on the other end to fit any type
of meter or connector. The wire on standard leads is 18 ga. (65 x 36) tinned copper stranding .145" O.D. RUBBER insulation. All standard
leads are available in SILICONE wire (440 x .002) copper stranding .145" O.D. To order silicone just add "S" to the part number. Stocked
length is 4 foot. These leads are sold as Sets 1 Red and 1 Black, single leads of different lengths can be ordered separately.
PAGE 11
Oldaker
TEL : (419) 759-3551
www.testleads.net
ALLIGATOR CLIP LEADS
STANDARD PLUG
STANDARD JACK
510-3
510-7
STANDARD PLUG
550
PART NUMBER AND OTHER PLUG STYLES.
SLOTTED JACK
FITS SIMPSON
260 METERS
RECESSED STANDARD
PLUG 510-1
RECESSED
STANDARD
PLUG .312”
510-4
510-2
STANDARD JACK
.080” PIN PLUG
510-5
565
.080” PIN PLUG
"TEST WITH THE BEST"
FAX : (419) 759-3312
RECESSED
STANDARD
PLUG .380”
RECESSED
STANDARD
PLUG .360”
RECESSED
STANDARD
SHORT PLUG
510-20
510-21
510-22
RETRACTABLE STANDARD
PLUG
510-11
534
NOTHING ON END
ALLIGATOR CLIP
510-6
STACKABLE STANDARD
PLUG
510-12
510
This lead has an alligator clip & boot on one end which is made of nickel plated steel, ( available in copper) with PVC boot and has various
other connections on the other end to fit any type of meter or connection. The wire on standard leads is 18 ga. (65 x 36) tinned copper
stranding .145" O.D. RUBBER insulation. All standard leads are available in SILICONE wire (440 x .002) copper stranding .145" O.D. To order
silicone just add "S" to the part number. Stocked length is 4 foot. These leads are sold as Sets 1 Red and 1 Black. Other lengths available..
MINIGATOR CLIP LEADS
STANDARD PLUG
STANDARD JACK
511-8
511-9
STANDARD PLUG
511-1
SLOTTED JACK
FITS SIMPSON
260 METERS
RECESSED
STANDARD
PLUG .312”
511-10
511-12
RECESSED STANDARD
PLUG
STANDARD JACK
.080” PIN PLUG
511-3
511-4
511-2
MINI
RECESSED
PLUG
MINI PLUG
MINI .105”
JACK
.080” PIN PLUG
PART NUMBER AND OTHER PLUG STYLES.
574
RECESSED
STANDARD
PLUG .380”
RECESSED
STANDARD
PLUG .360”
511-20
511-21
RETRACTABLE STANDARD
PLUG
511-11
RECESSED
STANDARD
SHORT PLUG
511-22
STACKABLE STANDARD
PLUG
543
NOTHING ON END
MINIGATOR CLIP
511-14
511-5
511-6
This lead has a minigator clip & boot on one end which is made of nickel plated steel, ( available in copper) with PVC boot and has various other connections on the
other end to fit any type of meter or connection. The wire on standard leads is 18 ga. (65 x 36) tinned copper stranding .145" O.D. RUBBER insulation. Mini leads use 20
ga. (41 x 36) tinned copper stranding .120" O.D. RUBBER insulation. All standard leads are available in SILICONE wire (440 x .002) copper stranding .145" O.D. To
order silicone just add "S" to the part number. Stocked length is 4 foot for standard leads, 3.5" for mini leads. These leads are sold as Sets 1 Red and 1 Black. Other
lengths and colors (Green, White, Yellow & Blue).
511-13
THIS LEAD IS ALSO AVAILABLE
USING 14 Ga. WIRE. RED OR BLACK
BATTERY STYLE CLIP TEST LEADS
STANDARD PLUG
604
SLOTTED JACK
FITS SIMPSON
260 METERS
STANDARD JACK
607-1
607
STANDARD PLUG
603
RECESSED STANDARD
PLUG
STANDARD JACK
608
609
RECESSED
STANDARD
PLUG .312”
RECESSED
STANDARD
PLUG .380”
RECESSED
STANDARD
PLUG .360”
RECESSED
STANDARD
SHORT PLUG
604-1
604-20
604-21
604-22
.080” PIN PLUG
609-1
MINI
RECESSED
PLUG
MINI PLUG
.080” PIN PLUG
PART NUMBER AND OTHER PLUG STYLES.
606-1
499-1
511
RETRACTABLE STANDARD
PLUG
603-11
BATTERY CLIP
STACKABLE STANDARD
PLUG
605
NOTHING ON END
764-5
602
This lead has a 20 AMP battery clip & boot on one end which is made of nickel plated steel, ( available in copper) with PVC boot and has various other
connections on the other end to fit any type of meter or connection. The wire on standard leads is 18 ga. (65 x 36) tinned copper stranding .145" O.D.
RUBBER insulation. Mini leads use 20 ga. (41 x 36) tinned copper stranding .120" O.D. RUBBER insulation. All standard leads are available in
SILICONE wire (440 x .002) copper stranding .145" O.D. To order silicone just add "S" to the part number. Stocked length is 4 foot for standard leads,
3.5" for mini leads. These leads are sold as Sets 1 Red and 1 Black.
476-8
PART NUMBER AND OTHER PLUG STYLES.
CROCODILE CLIP LEADS
STANDARD PLUG
570
STANDARD JACK
570-3
SLOTTED JACK
FITS SIMPSON
260 METERS
570-2
STANDARD PLUG
572
RECESSED STANDARD
PLUG
STANDARD JACK
572-1
.080” PIN PLUG
MINI PLUG
571
764-3
RECESSED
STANDARD
PLUG .312”
RECESSED
STANDARD
PLUG .380”
RECESSED
STANDARD
PLUG .360”
RECESSED
STANDARD
SHORT PLUG
570-1
570-20
570-21
570-22
.080” PIN PLUG
571-1
572-3
RETRACTABLE STANDARD
PLUG
572-11
CROCODILE CLIP
#10 LUG
764
592
STACKABLE STANDARD
PLUG
610
NOTHING ON END
764-6
This lead has a crocodile clip & boot on one end which is made of nickel plated steel, with PVC boot and has various other connections on the
other end to fit any type of meter or connection. The wire on standard leads is 18 ga. (65 x 36) tinned copper stranding .145" O.D. RUBBER
insulation. Mini leads use 20 ga. (41 x 36) tinned copper stranding .120" O.D. RUBBER insulation. All standard leads are available in SILICONE
wire (440 x .002) copper stranding .145" O.D. To order silicone just add "S" to the part number. Stocked length is 4 foot for standard leads, 3.5" for
mini leads. These leads are sold as Sets 1 Red and 1 Black..
PAGE 12
Oldaker
TEL : (419) 759-3551
www.testleads.net
"TEST WITH THE BEST"
FAX : (419) 759-3312
COIL CORD JUMPER LEADS
18 GA. RUBBER WIRE
6” LONG
MOLDED “Y”
2 CONDUCTOR COIL CORD
1 FOOT RETRACTED, 5 FOOT EXTENDED
776-25
776-23
776-27
R/A SHROUDED PLUG TO R/A PLUG
R/A SHROUDED PLUG TO BANANA JACK
R/A .380” SHROUDED PLUG TO
STRAIGHT SHROUDED PLUG
776-26
776-24
776-28
STRAIGHT PLUG TO R/A PLUG
R/A PLUG TO ALLIGATOR CLIP
STRAIGHT PLUG TO R/A SHROUDED PLUG
2602 EXTENDED PROBE TEST LEAD SERIES
15” PROBES
STANDARD PLUG
STANDARD JACK
2602
2602-1
SLOTTED JACK
FITS SIMPSON
260 METERS
RECESSED STANDARD
PLUG
2602-2
2602-5
2602-6
RECESSED
STANDARD
SHORT PLUG
STANDARD JACK
2602-8
2602-7
RECESSED
STANDARD
PLUG .312”
STANDARD PLUG
PART NUMBER AND OTHER PLUG STYLES.
2602-22
The TIP on this lead is made of .080" Dia. X 5/8" long stainless steel with a polished point. (Nickel plated).
The PROBE is 15" LONG For hard to reach areas.
The WIRE is 18 ga. (65x36) tinned copper stranding, rubber insulation .145" Dia. 20KV breakdown 5KV working.
Standard length is 5 feet, Sold as Sets 1 Red and 1 Black.
982-1 GRIPPER ADAPTER LEAD
992-1 AUTOMOTIVE TYPE HOOK ADAPTER LEAD
.100"
5.5" HOOK WITH
INSULATION
PIERCING NEEDLE.
2.160" GRIPPER
HOOK
.185"
6" OF 20 GA. PVC
INSULATED TEST
LEAD WIRE
STANDARD JACK
PLUGS INTO ANY LEAD
WITH STANDARD
PLUG OF ANY TYPE.
STANDARD BANANA JACK
PLUGS INTO ANY LEAD
WITH STANDARD BANANA
PLUG OF ANY TYPE.
This lead is very useful where a heavy duty hook is needed. This lead accessory
has an insulation piercing tip in the hook base. The other end has a standard
banana jack which fits any standard banana plug, recessed or standard. The wire
used is 6" of heavy duty 18 ga. 65 x 36 tinned copper stranding .140" O.D.
MATERIAL = Molded nylon with nickel silver contact.
SOLD = as 1 lead. Colors available are Red or Black.
This lead is very useful where hard to make connections are required. The narrow
size allows close side by side connection for high density IC's. The hook has 2
blades that are connected directly to the wire and are shaped to make a secure
connection. The other end has a standard banana jack which fits any standard
banana plug, recessed or standard. The wire is 6" of 20 ga. PVC wire .100" O.D.
MATERIAL = Molded nylon with stainless steel blades.
SOLD = as 1 lead. Colors available are Red or Black.
513-27 HOOK ADAPTER LEAD
2567 TEST LEAD EXTENSION
6" OF 18 GA. RUBBER
INSULATED TEST
LEAD WIRE
2.250" HOOK
STANDARD BANANA JACK
PLUGS INTO ANY LEAD
WITH STANDARD BANANA
PLUG OF ANY TYPE.
This hook lead permits direct hook-up either vertically or horizontally over
square wire wrap pins. The other end has a standard banana jack which fits
any standard banana plug, recessed or standard. The wire used is 6" of 18
ga. RUBBER wire .140" O.D.
MATERIAL = Molded nylon with gold plated beryllium copper hook.
SOLD as 1 each. Colors available, Red or Black.
PAGE 13
This lead adapter allows the user to add 4' to any test lead that has a
recessed standard banana plug.
The WIRE is 4' of 18ga. (65x36) tinned copper stranding, RUBBER
insulation .145" Dia. Wire is rated 20KV breakdown, 5KV working.
SOLD as 1 Set. Red and Black.
Oldaker
TEL : (419) 759-3551
www.testleads.net
JUMPER
FIRST END
18 Ga.
LEAD WIRE
PART #
STANDARD
PLUG
RECESSED
PLUG
RECESSED
PLUG
.080" PIN PLUG
3/4" LONG
RECESSED STACKABLE
STANDARD PLUG
STACKABLE
STANDARD PLUG
FAX : (419) 759-3312
"TEST WITH THE BEST"
LEADS
FIRST END
14 Ga.
LEAD WIRE
PART #
FIRST END
COIL CORD
LEAD WIRE
PART #
SECOND END
PART #
532
2576
857
-3
667
2577
858
-2
547
2578
859
-1
768
2579
860
-9
2522
2580
N/A
-19
2594
2595
N/A
-20
549
2581
861
-5
769
2582
862
-6
850
2583
863
-12
UNLESS SPECIFIED THESE LEADS ARE
SOLD AS SINGLE LEADS 4 FEET LONG,
WITH STANDARD COLORS RED OR
BLACK. PART NUMBERS 532, 667, 547 &
768 ALSO AVAILABLE IN GREEN, BLUE,
YELLOW & WHITE.
THESE LEADS ARE ALSO
AVAILABLE WITH SILICONE WIRE,
JUST ADD " S " TO THE PART
NUMBER.
*
THESE LEADS USE 20 GA.
RUBBER INSULATED WIRE
42" LONG. OTHER LENGTHS
AVAILABLE UPON REQUEST,
NOT AVAILABLE WITH COIL
CORD. . .
STANDARD PLUG
RECESSED
STANDARD PLUG
.312"
RECESSED
STANDARD PLUG
.380"
LEAD SHOWN
532-2
851
2584
864
-13
18 GA. HEAVY DUTY
RUBBER WIRE
RECESSED
STANDARD PLUG
.360"
852
2585
865
-14
770
2586
866
-8
771
2587
867
-7
772
2588
868
-10
RECESSED
STANDARD SHORT
PLUG
STANDARD JACK
SLOTTED JACK FITS
SIMPSON 260 METERS
LEAD SHOWN
2522-19
.080" PIN PLUG
838
2589
N/A
-11
18 GA. HEAVY DUTY
RUBBER WIRE
RETRACTABLE STANDARD PLUG
*
*
*
N/A
N/A
854
N/A
N/A
-16
855
N/A
N/A
-17
853
-15
MINI RECESSED BANANA PLUG
MINI BANANA PLUG
MINI JACK .105" DIA.
-0
NOTHING ON END
These jumper leads are available in 4 different styles of wire. Style 1 is 20 ga. (41 x 36 ) tinned copper stranding .120" Dia. Rubber insulation. Style 2 is 18 ga. ( 65 x
36 ) tinned copper stranding .145" Dia. Rubber insulation, another option is 14 ga. ( 79 x 45 ) tinned copper stranding .145” O.D. Style 3 is18 ga. ( 440 x .002 ) copper
stranding .145" SILICONE insulation. Standard length 4'. Other lengths available upon request. Style 4 is coil cord, 20 ga. ( 65 x 36 ) tinned copper stranding .165" Dia.
Neoprene insulation, 1' retracted, 5' extended, coil size .750". Available in Black and Red coils only.
PAGE 14
Oldaker
TEL : (419) 759-3551
www.testleads.net
FAX : (419) 759-3312
994 ADAPTOR LEAD
"TEST WITH THE BEST"
4379 MINIGATOR CLIP
WITH .025” PIN CONNECTOR
1.625"
This adaptor lead set is replacement for the B&K Precision # FP-6. Has standard
banana plugs on one end and 2.5" hooks on other.
WIRE is 20 ga. (41 x 36) tinned copper stranding with PVC insulation... Standard
length is 4 feet, SOLD as Sets 1 Red, 1 Black and 1 Green
This minigator clip has a .025" square pin for direct connection to square socket
on wire (Oldaker part # 4262 & 4262-1).
MATERIAL = Nickel plated steel clip with molded PVC boot.
SOLD = as 1 each. Red Only.
948 SPRING LOADED PIN PROBE
947 MINIATURE GRIPPER
BENDS
o
35
SPRING LOADED
2.125"
This bendable, clamp style, rotating gripper can also be used with leads 4262
and 4262-1. It is well suited for use with surface mount devices, and has
extremely thin wires, can bend 35 degrees and still remain fully operable. It
has two .025" square pins to plug into leads and is rated 42V. SOLD as 1
each. Red or Black.
This .030" dia. Needle point pin probe is made of stainless steel for durability
and is spring loaded for reliability and accuracy. It has a .025" square pin to fit
leads 4262 and 4262-1. Rated 50V. SOLD as 1 each. Red or Black.
961-1 TWEEZER LEAD
961-2 TWEEZER LEAD
18 Ga. WIRE
LENGTH 5”
BNC
MALE
STANDARD
BANANA
PLUGS
The tweezers lead is an easy way to test surface mount devices (SMD)
and allows the user one hand testing. Tips are gold plated, durable and
assure positive electrical connection. Maximum voltage rating is 250
VRMS @ 3 Amps. The cable is RG/174U. Lead length 4 feet.
The tweezers lead is an easy way to test surface mount devices (SMD)
and allows the user one hand testing. Tips are gold plated, durable and
assure positive electrical connection. Maximum voltage rating is 250
VRMS @ 3 Amps. The cable is RG/174U. Lead length 4 feet.
765 BNC FEMALE BREAKOUT LEAD
775 BNC MALE BREAKOUT LEAD
MINI HOOK
NOTHING ON END
-0
ALLIGATOR CLIP
-1
MINIGATOR CLIP
STACKABLE PLUG
-2
-3
MINI HOOK
NOTHING ON END
-5
-5
-0
ALLIGATOR CLIP
HOOK
-1
-4
The wire on these breakout leads is 20 ga. (41 x 36) tinned copper stranding with
PVC insulation. The BNC Female connector has gold plated center contacts with
a black polyethelene housing. Red wire connected to center conductor. To order
add the dash number of the type of connection you want on the other end.
MINIGATOR CLIP
-2
STACKABLE PLUG
-3
HOOK
-4
The wire on these breakout leads is 20 ga. (41 x 36) tinned copper stranding
with PVC insulation. The BNC Male connector has gold plated center contacts
with a black polyethelene housing. Red wire connected to center conductor. To
order add the dash number of the type of connection you want on the other end.
PAGE 15
Oldaker
TEL : (419) 759-3551
www.testleads.net
"TEST WITH THE BEST"
FAX : (419) 759-3312
506 SERIES BREAKOUT LEAD
OTHER STYLES
LISTED BELOW
7", 18 GA. HEAVY DUTY
RUBBER INSULATED WIRE
3/4" DUAL STACKABLE
BANANA PLUG.
3 FEET RG/58, 50 OHM CABLE
OTHER LENGTH AVAILABLE
UPON REQUEST.
MINIGATOR CLIP
RECESSED STANDARD
PLUG
.080” PIN PLUG
506-14
STANDARD PLUG
506-3
506-8
506-9
506-5
506-11
506-4
EXTENDED HOOK
STANDARD HOOK
RETRACTABLE STANDARD
PLUG
STACKABLE STANDARD
PLUG
506-7
MINI HOOK
ALLIGATOR CLIP
506-10
506-2
NOTHING ON
ONE END.
506-6
598 SERIES BREAKOUT LEAD
OTHER STYLES
LISTED BELOW
BNC MALE
3 FEET RG/58, 50 OHM CABLE
OTHER LENGTH AVAILABLE
UPON REQUEST.
7", 18 GA. HEAVY DUTY
RUBBER INSULATED WIRE
GOLD
CENTER
PIN
5981 SERIES
MOLDED STRAIN RELIEF
AVAILABLE IN OTHER COLORS
.080” PIN PLUG
598-12
RECESSED STANDARD
PLUG
STANDARD PLUG
MINIGATOR CLIP
598-3
598-7
STANDARD HOOK
MINI HOOK
OTHER STYLES
LISTED BELOW
NOTHING ON
ONE END.
ALLIGATOR CLIP
598-8
598-9
598-1
598-10
598-4
EXTENDED HOOK
AVAILABLE WITH BOOT
THAT COMPLETELY COVERS
BNC, AVAILABLE IN COLORS
RETRACTABLE STANDARD
PLUG
STACKABLE STANDARD
PLUG
598-6
598-5
KELVIN CLIP
598-2
598-13
766 SERIES BREAKOUT LEAD
3 FEET RG/58, 50 OHM CABLE
OTHER LENGTHS AVAILABLE
UPON REQUEST.
7", 18 GA. HEAVY DUTY
RUBBER INSULATED WIRE
BNC FEMALE
GOLD
CENTER
PIN
MOLDED STRAIN RELIEF
AVAILABLE IN OTHER COLORS
.080” PIN PLUG
766-11
RECESSED STANDARD
PLUG
MINIGATOR CLIP
STANDARD PLUG
766-2
766-7
EXTENDED HOOK
MINI HOOK
766-4
766-9
766-8
The cable used on the
above leads is RG/58,
center conductor is
(19 x 0071) tinned copper
stranding .195" O.D. PVC
insulation Cap=29.5 PF/FT,
color black.
766-10
766-3
STANDARD HOOK
CABLE DESCRIPTION
RETRACTABLE STANDARD
PLUG
STACKABLE STANDARD
PLUG
766-6
NOTHING ON
ONE END.
ALLIGATOR CLIP
766-5
766-1
490 SERIES BREAKOUT LEAD
OTHER STYLES LISTED BELOW
7", 24 GA. RUBBER
INSULATED WIRE
STANDARD HOOK
MINI HOOK
490-1
490-4
BNC MALE
KELVIN CLIP
490-13
ALLIGATOR CLIP
MINIGATOR CLIP
NOTHING ON
ONE END.
490-2
490
490-3
3 FEET RG/174, 50 OHM CABLE
OTHER LENGTHS AVAILABLE
UPON REQUEST.
4901 SERIES
AVAILABLE WITH BOOT
THAT COMPLETELY COVERS
BNC, AVAILABLE IN COLORS
PAGE 16
.080” PIN PLUG
490-12
CABLE DESCRIPTION
The cable used on this
lead is RG/174, center
conductor is (7 x 34)
tinned copper stranding
.125" O.D. PVC insulation
Cap=30.0 PF/FT, color black.
Oldaker
TEL : (419) 759-3551
STANDARD LENGTH ON THESE
LEADS IS 3' , OTHER LENGTHS
AVAILABLE UPON REQUEST
www.testleads.net
FAX : (419) 759-3312
"TEST WITH THE BEST"
BNC / DUAL PLUG LEADS
BNC MALE & BNC FEMALE LEADS
AVAILABLE WITH DIFFERENT COLOR
STRAIN RELIEFS. ORANGE, GREEN,
YELLOW, BLUE, BROWN, GREY,
PURPLE, BLACK, RED.
541-2 = RG/58
541-3 = RG/59
541-4 = RG/174
GOLD
PLATED
PIN
OTHER COLOR STRAIN
RELIEFS AVAILABLE
BLACK, RED, GREEN, YELLOW, BLUE, WHITE
621-1 = RG/58
621-2 = RG/59
622-1 = RG/58
622-2 = RG/59
GOLD
PLATED
SOCKET
OTHER COLOR STRAIN
RELIEFS AVAILABLE
BLACK, RED, GREEN, YELLOW, BLUE, WHITE
GOLD
PLATED
SOCKET
OTHER COLOR STRAIN
RELIEFS AVAILABLE
BLACK, RED, GREEN, YELLOW, BLUE, WHITE
541 = RG/58
GOLD
PLATED
PIN
BNC
MALE
BNC
MALE
OTHER COLOR BOOTS
AVAILABLE, BLACK, RED,
GREEN, YELLOW, BLUE, WHITE
766 = RG/58
3/4" DUAL STACKABLE
BANANA PLUG.
3/4" DUAL STACKABLE
BANANA PLUG.
3/4" DUAL STACKABLE
BANANA PLUG.
559 = RG/58
GOLD
PLATED
SOCKET
599-1 = RG/174
GOLD
PLATED
PIN
506-1 = RG/58
506 = ZIP CORD
506-13 = RG/174
CABLE DESCRIPTION
RG/58 cable has a center conductor of (19 x 007) tinned copper stranding .195" O.D. Insulation, dielectric is 116P nom, Cap 29.5 PF/Ft. Maximum operating voltage
1900 - 50 ohms, temp. Rating -55c to +90c. Color Black.
RG/59 cable has a center conductor of 22 ga. copper stranding .242" O.D. Insulation, dielectric is 146P nom, Cap 21 PF/Ft. Maximum operating voltage 2300 - 75
ohms, temp. Rating -40c to +80c. Color Black.
RG/174 cable has a center conductor of (7 x 34) tinned copper stranding .105" O.D. PVC Insulation, dielectric is 116P nom, Cap 30.0 PF/Ft. Maximum operating
voltage 1500 - 50 ohms. Temp rating -100c to +300c. Color Black.
PAGE 17
Oldaker
TEL : (419) 759-3551
www.testleads.net
FAX : (419) 759-3312
"TEST WITH THE BEST"
944 SERIES PROBES
The Oldaker 944 series test probes are designed to provide utmost user safety. The 1000V products are
based on the Rigid Sleeve principle: Each probe has a socket that accommodates a standard banana plug
either standard, shrouded or retractable. The sleeve that surrounds the sides of the 4mm socket is insulated
to keep fingers from the test area to insure a shock proof connection to 1000V. Choose from a variety of grip,
pierce, clamp and hook types to find the right probe for your test and measurement applications.
The 944-1 features 2 rotating, clamp-style tongs for securely grabbing pins and wires with
diameters of up to 5/32". And, thanks to the special shrink - tubing on the flexible shaft, this and all
944 probes are resistant to solder iron heat and high temperatures. Sold as RED or BLACK.
The 944-2 features a clamp-style probe with spring-loaded, stainless-steel pin that allows the user
to pierce wires without removing the insulation or causing any damage to the wire. This part
pierces wires up to .138" O.D. Sold as RED or BLACK
BLE
FLEXA
944-1
944-2
The 944-3 features a special wide-opening jaw which opens to 7/8" to accommodate a large range
of test connectors in R & D labs, workstations and service departments. When the plunger is
pressed the jaws simultaneously open and extend from the probe body, then close to make a tight,
reliable connection. Sold as RED or BLACK
944-3
The 944-4 is the perfect tool for electricians and repair technicians working in hard-to-reach spaces.
Its spring-loaded hook extends to a full 7/32" before retracting for a secure grip around the test
point.. Sold as RED or BLACK
944-4
945 PROBES
945-1 TIP PROTECTOR
The 945 provides precise contact with the area being tested. Its tapered,
durable steel tip (9/32" long) is perfect for penetrating insulated and backing
layers on PC boards. An anti-shorting clear cap (Oldaker P/N 945-1) can be
purchased separately for fine pitch testing... Sold as 1 each, RED or BLACK.
946 PROBES
The 946 combines testing and measurement functions in one handy tool.
Its rugged, dual-function test tip is equally suitable for penetrating insulating
and backing layers of printed circuit boards or for inserting directly into
4mm dia. sockets... Sold as 1 each, RED or BLACK.
949-1 LARGE JAWED INSULATED CLIP
949-2 LOW PROFILE INSULATED CLIP
The 949-2 is an insulated clip that attaches to standard 4mm shrouded plugs
and is low profile, the center of the jaw clamps pins up to 3/8" dia. while the
teeth at the front of the jaw are designed to accommodate extremely fine wires. .
. Sold as 1 each, RED or BLACK.
963 MINI INSULATED CLIP
The 949-1 is an insulated clip that attaches to standard 4mm shrouded plugs
and has an expanded clamping range of 1", making it especially useful in a wide
range of heavy duty electrical, automotive, marine, aviation and industrial test
measurement applications ... Sold as 1 each, RED or BLACK.
The 963 clip is an insulated minigator with standard banana jack to fit shrouded
or exposed plugs. . . SOLD as 1 each, RED or BLACK.
PAGE 18
Oldaker
TEL : (419) 759-3551
www.testleads.net
497-3 HOOK-IT
520 LUG ADAPTER
THREADED
8-32
.150"
.175"
"TEST WITH THE BEST"
FAX : (419) 759-3312
.027"
TYPICAL APPLICATION
2.2
50
"
This threaded adapter converts any 8-32 threaded probe tip to a #10 lug.
MATERIAL = #10 lug with nickel plated brass insert threaded 8-32 and
molded ABS insulator.
SOLD as Sets 1 Red and 1 Black.
This 8-32 threaded Hook-It attaches directly onto any test probe tip with
matching threads and allows the user to attach lead to any small connector.
MATERIAL = .028" silver coated beryllium copper wire with nickel plated
brass insert and molded nylon housing. SOLD as Sets 1 Red and 1 Black.
498 TIP PROTECTOR
458-4 ALLIGATOR CLIPS FIT RECESSED 4 mm PLUG
BEFORE
PROTECTS USER
FROM SHORTING
OUT TIP. . .
AFTER
This alligator clip set fits any standard recessed 4mm plug.
MATERIAL = Nickel plated steel.
SOLD = Part # 458-4 is Sold as Sets, 1 Red and 1 Black.
MATERIAL = Polypropelene.
SOLD = as Sets 2 Red and 2 Black.
458-1 THREADED CLIPS
820 THREADED TELEPHONE STYLE CLIP
TYPICAL APPLICATION
This 8-32 threaded alligator clip (149-2) attaches directly to threaded probe.
MATERIAL = Nickel plated steel with 8-32 threaded end. The Boot (226) is PVC.
SOLD = Part # 458-1 is Sold as Sets, 1 Red and 1 Black.
This clip set threads directly onto any lead with an 8-32 threaded tip, and adds
the ability to clip onto larger parts. Clip length is 2 19/32" x 15/16" high and has
a PVC boot. Sold as Sets 1 Red and 1 Black, can be ordered separately.
458-3 ALLIGATOR FITS 4 MM PLUGS
521 PLUG ADAPTER
THIS ADAPTER FITS
NON RECESSED PLUGS ONLY
This threaded adapter converts any standard banana plug to a threaded
connection and allows the user to thread on any of the Oldaker adapters
directly to the plug end and changes meter lead to a jumper lead.
MATERIAL = nickel plated brass with molded in polyethelene insulator.
SOLD as Sets 1 Red and 1 Black.
This alligator clip set fits any standard 4mm plug.
MATERIAL = Nickel plated steel.
SOLD = Part # 458-3 is Sold as Sets, 1 Red and 1 Black.
623 & 623-3 THREADED EXTENSION TIPS
521-1 PLUG ADAPTER
623
5"
623-3
THIS ADAPTER FITS
NON RECESSED PLUGS ONLY
3.25”
This threaded adapter converts any standard banana plug, recessed or exposed,
to a threaded connection and allows the user to thread on any of the Oldaker
adapters directly to the plug end and changes meter lead to a jumper lead.
MATERIAL = nickel plated brass with molded in polyethelene insulator.
SOLD as Sets, 1 Red and 1 Black.
These extended tips thread onto any standard probe tip with 8-32 threads, and
allows the user to reach difficult areas, it also has a stainless steel tip with a
polished point for insulation piercing or penetrating coated connections. The tip is
fully insulated to the point with cut resistant clear shrink tubing, to prevent shorting.
MATERIAL = .045" Dia stainless steel needle tip. 623 is 5” long, 623-3 is 3.25” long.
The base is nickel plated brass with 8-32 threads and is molded in polyproplene.
SOLD as Sets 1 Red and 1 Black.
PAGE 19
Oldaker
TEL : (419) 759-3551
www.testleads.net
FAX : (419) 759-3312
"TEST WITH THE BEST"
966 PLUG TO PLUG ADAPTER
STANDARD PLUG
STANDARD PLUG
INSERT BOTH PLUGS IN EACH
END OF THE ADAPTER.
This adapter has standard banana jacks on each end and allows the user to attach any lead with a standard banana plug, (shrouded or exposed) to the end of
another standard banana plug lead which will extend a standard 4' lead to 8' . (See Diagrams Above). Sold as Sets, 1 Red and 1 Black.
966-2 PROBE ADAPTER
PLUG-IN ACCESSORY
PRESS ATTACHMENT ONTO
END OF ADAPTER PLUG.
THREADED PROBE
966-2 ADAPTER
This adapter threads onto any lead with an 8-32 threaded tip and allows the user to attach any of the Oldaker 944 series heavy duty lead accessories to any of the
Oldaker standard lead sets (See Illustrations Above). This adapter also accepts The Oldaker insulated clip 949 series and if required Oldaker Part Numbers 945 &
946 can also be attached.
Sold as Sets, 1 Red and 1 Black.
966-1 TEST LEAD EXTENSION
966 ADAPTER KIT
TO METER
USER
TYPICAL APPLICATION
4' LEAD
4' LEAD
966-1
ADAPTER
One end of this adapter threads onto any probe with an 8-32 threaded tip and allows the user
to attach any lead with a standard banana plug, (shrouded or exposed) to the other end which
will extend a standard 4' lead to 8' . (See Diagrams Above). Sold as sets, 1 Red and 1 Black.
815 BED OF NAILS CLIP
5-1
81
This complete adapter kit has 1 set of all the adapters shown
on this page. The kit includes 1 red and 1 black of each of
the following adapters, 521-1, 966, 966-1 and 966-2. The kit
comes packaged in a reusable plastic pouch.
149-2 THREADED ALLIGATOR CLIP
OT
BO
USES 226 BOOT
This heavy duty 2.625” telephone type clip has a cluster of hardened needles
and also a single pin for extra secure connection and a wide opening jaw
(1.312"). 815 is Sold as 1 Clip. 815-1 Boot is Sold as 1 Boot, Red or Black.
This 8-32 threaded alligator clip attaches directly to threaded probe.
MATERIAL = Nickel plated steel with 8-32 threaded end.
SOLD = Part # 149-2 is sold as 1 Clip. Part # 226 is Sold as 1 Boot, colors
available are red, black, blue, green, yellow & white.
149-4, 458-5 ALLIGATOR CLIP FITS PIN PLUG
149 ALLIGATOR CLIP
USES 226 BOOT
USES 226 BOOT
This alligator clip can be soldered or crimped directly to wire.
MATERIAL = Nickel plated steel. SOLD = Part # 149 is Sold as 1 Clip.
Part # 226 is Sold as 1 Boot, colors available are red, black, blue,
green, yellow & white..
This Mueller #60PR clip attaches directly to .080” pin plug. MATERIAL = Nickel
plated steel. Part # 149-4 is Sold as 1 Clip. Part # 226 is Sold as 1 Boot, colors
available are red, black, blue, green, yellow & white.. Also Available, Part # 458-5,
Which is Clip & Boot assembled and Sold as Sets 1 Red & 1 Black.
PAGE 20
Oldaker
TEL : (419) 759-3551
www.testleads.net
249 MINI CLIP
"TEST WITH THE BEST"
FAX : (419) 759-3312
668 CROCODILE CLIP
USES 277A BOOT
USES 680 BOOT
This Mueller #30BL clip is made of nickel plated steel and can be crimped or
soldered. 249 clip is Sold as 1 Clip. Part # 277A is Sold as 1 Boot, please
specify color, Red or Black.
This Mueller #85 crocodile clip has a screw for attaching wire. Clip is made of
plated steel. 668 clip is sold as 1 Clip. Part # 680 is Sold as 1 Boot. Colors
available are red, black, green, blue, yellow & white.
170 10 AMP CLIP
170-1 20 AMP CLIP
USES 684-1 BOOT
USES 684 BOOT
170C IS COPPER CLIP
170-1C IS COPPER CLIP
This Mueller #48B clip is plated steel with screw connection. 170 is Sold as 1 Clip.
Part # 684 is sold as 1 Boot, please specify Red or Black.
This Mueller #27 clip is plated steel with screw. 170-1 is Sold as 1 Clip. Part #
684-1 is Sold as 1 Boot, please specify Red or Black.
170-2 40 AMP CLIP
170-3 50 AMP CLIP
USES 684-2 BOOT
USES 684-3 BOOT
170-2C IS COPPER CLIP
This Mueller #25 clip is plated steel with screw. 170-2 is Sold as 1 Clip. Part #
684-2 is sold as 1 Boot, please specify Red or Black.
This Mueller #21A clip is plated steel with screw. 170-2 clip is Sold as 1 clip.
684-3 boot is Sold as 1 boot of one color, please specify Red or Black.
977 STUB NOSE CLIP
454 HOOK
ATTACH WIRE
BODY
PLUNGER
2.250"
This Mueller #46A clip is plated steel with crimp connection and plastic
handles. 977 clip is Sold as 1 clip, please specify Red or Black.
816 EXTENDED HOOK
This hook is field repairable and permits direct hook-up either vertically or
horizontally over square wire wrap pins. and is available in 10 different
colors, red, black, brown, orange, yellow, green, blue, violet, grey & white.
MATERIAL = Gold plated beryllium copper conductor with molded nylon
housing. SOLD as 1 Each, Select Color.
817 MINI MICRO HOOK
ATTACH WIRE
BODY
PLUNGER
1.750"
5.000"
This 5" hook is field repairable and permits direct hook-up either vertically
or horizontally over square wire wrap pins.
MATERIAL = Gold plated beryllium copper with molded nylon housing.
SOLD as 1 Each Red Or Black.
This hook is field repairable and is designed for difficult IC test connections.
Lightweight (less than 1 gram) and finger-eze Hypo Action permits direct hook-up to
delicate wires where weight & leverage may damage component. Available in 10
different colors, red, black, brown, orange, yellow, green, blue, violet, grey & white.
MATERIAL = Gold plated beryllium copper conductor with molded nylon housing.
SOLD as 1 Each, Select Color. . .
PAGE 21
Oldaker
TEL : (419) 759-3551
www.testleads.net
982 DOUBLE GRIPPER
.100"
"TEST WITH THE BEST"
FAX : (419) 759-3312
4258 MICRO HOOK WITH .025” PIN
.185"
2.160"
This hook is designed for hard to make test connections with different shapes and
sizes. The narrow size allows close side by side connection for high density IC's.
The hook has 2 blades that are connected directly to the wire and are shaped to
make a good connection, and is field repairable. Available in red, black, blue, green,
yellow & white.
Material = molded nylon with stainless steel blades. Sold = as 1 Each, Select Color.
1.75"
This micro hook is designed for difficult IC test connections. Has .025" square
pin connector which plugs directly onto wire socket.
MATERIAL = Molded nylon with gold plated center contact.
SOLD as 1 Each, available in 10 colors brown, black, red, orange, yellow,
green, blue, violet, gray & white.
4359 PICO HOOK WITH .025” PIN
4256 DBL-GRIPPER WITH .025” PINS
.100"
.060"
.090"
.016"
.018"
DIA.
.013"
2.250"
1.420"
This double grip hook assures solid positive connection and with a narrow
configuration (.050" wide) makes it ideal for side by side stacking. It also has
dual .025" square pins for plug in connection, its spring loaded design is easy
to use and assures solid positive contact.
MATERIAL = Molded Nylon.
SOLD as 1 Each. Available in 10 different colors, black, brown, red, orange,
yellow, green, blue, violet, gray & white.
This pico hook has one .025" square pin which plugs into wire socket and is
designed for direct connection to a single leg of a DIP or other components
with a maximum diameter of .025".
MATERIAL = Molded nylon with gold plated center contact.
SOLD as 1 Each. Available in 10 colors, brown, black, red, orange, yellow,
green, blue, violet, gray & white.
491 SOLDER & PRESS 4 mm PLUG
992 AUTOMOTIVE TYPE HOOK
RATED 15 AMP
USE INSULATOR
457C FOR
BANANA PLUG.
.192"
1.062"
USE INSULATOR
457B FOR RECESSED
BANANA PLUG.
5.5"
This heavy-duty test hook is ideal for automotive testing, solder connection.
Has sharp point in hook for sure contact. Available in black, brown, blue,
orange, yellow, grey and white.
MATERIAL = Molde nylon with nickel silver contact. SOLD as 1 Each.
This standard banana plug fits .175" Dia. Jack and must be soldered onto wire
and pressed into insulator 457B (recessed) or 457C (standard).
Material = knurled nickel plated brass body with nickel silver contacts.
Sold = as 1 Plug.
491B THREADED 4 mm PLUG
491A STACKABLE 4 mm PLUG
RATED 15 AMP.
RATED 15 AMP.
.257" DIA.
THREADED
8-32
.250" O.D.
DRILLED
.166" DIA.
1.062"
1.5"
This standard stackable banana plug fits .175" Dia. And has .166" Dia
hole in back. NOTE = This is a stand alone plug, no insulator.
Material = knurled nickel plated brass body with nickel silver contacts.
Sold = as 1 Plug.
This standard banana plug fits .175" Dia. Jack and is threaded 8-32.
NOTE = This is a stand alone plug, no insulator.
Material = knurled nickel plated brass body with nickel silver contacts.
Sold = as 1 Plug.
284-3 .080” PIN PLUG
450 MINI PLUG
RATED 10 AMP.
.080"
USE INSULATOR
457C FOR
PIN PLUG.
.187" DIA.
USE INSULATOR
457C FOR
MINI PLUG.
.187" DIA.
.540"
1.5"
This standard pin plug has a .080" Dia. Pin and must be
soldered onto wire and pressed into insulator 457C.
MATERIAL = Nickel plated brass.
SOLD = as 1 Pin Plug.
This mini plug fits a .105" jack and must be soldered onto wire and
pressed into insulator 457C.
MATERIAL = Nickel plated brass body with nickel silver contacts.
SOLD = as 1 Mini Plug.
PAGE 22
Oldaker
TEL : (419) 759-3551
www.testleads.net
"TEST WITH THE BEST"
FAX : (419) 759-3312
457B INSULATOR FOR 491 PLUGS.
457D INSULATOR FOR 456C & 456D JACKS
456C 4 MM BANANA JACK & 456D THREADED JACK
Use Insulator 457D
For Both 456C & 456D
.187" O.D.
.750"
1.5"
The 456C banana jack accepts any standard banana plug. The 456D is an 8-32
threaded jack. Both types must be soldered to wire and pressed into 457D
insulator.
MATERIAL = nickel plated brass
456C IS SOLD = as 1 Each of banana jack.
456D IS SOLD = as 1 Each of threaded jack.
457B insulator is for a recessed standard banana plug 491 and 457D
insulator is used with 456C banana jack and 456D threaded jack.
MATERIAL = ABS V0/94 flame retardant plastic.
SOLD = as 1 Each. Available in red, black, green, yellow, blue and
white.
908-1 SOCKET & 908-2 PLUG
2 MM BANANA PLUG & INSULATOR 2570
”
5
.47
1.1
0 0”
JACK & PLUG
CAN BE THREADED
TOGETHER.
”
INCLUDES
INSULATOR
1.030
.460”
1.150"
.787"
The 908-1 jack is threaded 8-32. The 908-2 4 MM plug is threaded 8-32.
MATERIAL = Nickle plated brass body with nickle silver contacts and
molded Polyproplene.
SOLD = as 1 each of 1 color. Select 908-1 Jack or 908-2 Plug. Colors
Red Or Black.
This 2 mm banana plug (2570) must be soldered to wire and pressed into
insulator.
MATERIAL = nickel plated brass, nickel silver contacts. Insulator Molded Nylon.
457C INSULATOR FOR 450, 491,& 284-3 PLUGS
660-1 LUG ADAPTER FITS 4 MM PLUG
.435"
.110"
TO
.300"
.250" O.D.
1"
1.750"
This insulator accepts part numbers 450, 491 & 284-3 and when pressed together
becomes a miniature banana plug, a standard banana plug or a standard pin plug.
MATERIAL = ABS V0/94 flame retardant plastic.
SOLD = as 1 Each. Available in red, black, green, yellow, blue and white.
This lug adapter fits any standard or recessed banana plug. The lug fits
any size terminal from .100" to .300".
Material = nickel plated brass body with nickel plated copper lug.
Sold = as 1 lug.
SAFETY RECESSED STACKABLE 4 MM PLUG
826 RETRACTABLE 4 MM PLUG
2594
2522
DO-IT YOURSELF,
JUST SOLDER AND
SNAP TOGETHER.
This plug fits any meter that requires a banana plug, makes no difference if it takes
recessed or standard. The sleeve is spring loaded and covers the contacts when the
plug is removed from the meter. Total length, 2.335"
MATERIAL : molded nylon with nickel,plated brass body and gold plated contacts.
SOLD : as 1 Plug. Select Color, Red or Black.
This 3 piece recessed safety stackable plug is a solder type and then
snaps together.. Plug 2522 is covered, 2594 is not covered.
Material = Nickel plated brass body with nickel silver contacts. Plastic
housing is Molded nylon.
Sold = as 1 Plug. Colors available are Red, Black, Yellow, Blue & Green.
2514 SERIES HI-VOLTAGE PROBE HANDLES WITH TIPS
2571 2 MM SOCKET
THREADED
1/4-28
4.875"
I.D. .305”
WALL
THICKNESS .097”
.500"
.312" O.D.
MATERIAL:
POLYPRO.
.875"
.710"
TIP “A”
TIP “B”
106HH
106KK
2514 Uses tip “B”. Nickel Plated Brass not threaded.
2514-1 Uses tip “A”. Stainless Steel Needle Tip and threaded for accessories.
SOLD = as 1 Probe Each. Choose Red Or Black.. Tips can be ordered separately,
106HH has a threaded needle tip, 106KK has a .080” brass tip. Sold as Each.
PAGE 23
This 2 mm safety insulated jack (2571) is for surface mount and has
a .187” tab for solder connection or slide connector.
MATERIAL = Nylon.
SOLD = As 1 Jack, Specify Color (Red Or Black)..
Oldaker
TEL : (419) 759-3551
www.testleads.net
805-3 DBL-PLUG TO BNC MALE
FAX : (419) 759-3312
"TEST WITH THE BEST"
805-4 DBL-PLUG TO BNC FEMALE
This adapter has double stackable banana plugs with cross holes on one
end and BNC male on other.
MATERIAL = ABS Black. Plugs nickel plated brass. SOLD = as 1 Each.
This adapter has double stackable banana plugs with cross holes on one end
and a BNC female on the other.
MATERIAL = ABS Black. Plugs nickel plated brass. SOLD = as 1 Each.
805-6 DBL-BINDING POST TO BNC FEMALE
805-5 DBL-BINDING POST TO BNC MALE
This adapter has a red and black binding post with cross holes
for stacking on one end and a BNC female on the other.
MATERIAL = ABS. Nickel plated brass. SOLD = as 1 Each.
This adapter has a red and black binding post with cross
holes for stacking on one end and BNC male on the other.
MATERIAL = ABS. Nickel plated brass. SOLD = as 1 Each.
805-2 DBL-PLUG WITH SET SCREWS
.375”
985-2 BULKHEAD BNC FEMALE CONNECTOR.
.340”
This plug adapter has double stackable banana plugs with set screws for attaching
wire. Colors are Red or Black.
MATERIAL = ABS with nickel plated brass. SOLD = as 1 Each, Select Red or Black.
796 IN-LINE FUSE HOLDER
This is a BNC Female Bulkhead type connector and has gold center conductor
and nylon plastic threaded base, solder connection.
SOLD = as 1 Each.
984 BNC MALE
984 > RG/58 984-1 > RG/59
985 BNC FEMALE
985 > RG/58 985-1 > RG/59
APROX.
2” TO 2.5”
This 2 piece crimp style fuse holder uses 1/4" dia. Fuses from
7/8" to 1 1/4" long, up to 30 Amp.
MATERIAL : molded nylon, color yellow SOLD : as 1 Each
These BNC dual crimp connectors are for RG/58 and RG/59 cable. The male
BNC part # is 984, The female BNC part # is 985.
MATERIAL = Non tarnish finish, Gold plated center jack. SOLD = as 1 Each.
836 NEEDLE TIP & INSULATOR COMBO
962 LEAD BENDER
MODEL 962-1
MODEL 962-1 FORMS:
1 WATT
2 WATT
1" BODY LENGTH
1.25" BODY LENGTH
This tip and insulator combo includes one .080" stainless steel needle tip,
polished point, threaded 8-32 and one 5" ABS molded insulator. Colors are
Red or Black..
MATERIAL: molded ABS with nickel plated brass tip and stainless steel
needle tip. Note: Tip threads into insulator.
SOLD: as 1 Each, Tip and Insulator, please specify color, Red or Black.
MODEL 962-2 FORMS:
DIODES
1/4 WATT
1/2 WATT
MODEL 962-2
Radiused edges, eliminates scarring of leads. Graduated in .050"
increments. Made of high impact red cycolac plastic. Size - 5 1/2" long.
PAGE 24
Oldaker
TEL : (419) 759-3551
www.testleads.net
"TEST WITH THE BEST"
FAX : (419) 759-3312
OLDAKER SCOPE PROBES
OTHER ACCESSORIES
AVAILABLE
12” GROUND LEAD
4263
WIRE WRAP TIP
4264
ALLIGATOR TIP
4270
PICO HOOK
4257
PINCER HOOK
4256
MICRO HOOK
HEAVY DUTY - RUGGED - RELIABLE
3 POSITION SWITCH (1X, REF, 10X)
4258
PROBE HOLDER
CHANNEL
MARKERS
4272
4271
COMPENSATION FOR ALL SCOPES
R.P.OPTION = Available with readout pin, the readout
actuator option (permanently attached), is available on the
10X fixed probes only. This option provides necessary
resistor circuit to change the range factor on model 465,
475, 485 & 7000 series Tektronix scopes.
FLEXIBLE 5 FOOT CABLE.
WIRE WRAP GROUND
4265
SCOPE PROBE SELECTION CHART
PART #
3501
3502
3503
3504
3504RP
3505
3505RP
3506
3510
3511
3512
3513
3515
ATTEN.
SWT 1X-10X
SWT 1X-10X
FIXED 1X
FIXED 10X
FIXED 10X
FIXED 10X
FIXED 10X
FIXED 10X
FIXED 100X
FIXED 1X
FIXED 1X
FIXED 10X
SWT 1X-10X
B.W.MHz
@ 30B
5/100
10/200
20
100
100
200
200
100
100
12
15
300
6/250
RISE
TIME
N.S.
70/3.5
35/1.4
17.5
3.5
3.5
1.4
1.4
11.0
3.5
60
23.3
1.16
58/1.4
LOADING
pF
MO
90/16
1/10
60/15
1/10
45
1
15
10
15
10
13
10
13
10
10
60
4
10
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
LENGTH
5 FOOT
5 FOOT
5 FOOT
5 FOOT
5 FOOT
5 FOOT
5 FOOT
6 FOOT
5 FOOT
6 FOOT
6 FOOT
5 FOOT
6 FOOT
DC
MAX
500 V
500 V
500 V
500 V
500 V
500 V
500 V
600 V
500 V
600 V
500 V
500 V
500 V
971 “THE THIRD HAND”
MULTI ADJUSTABLE
HANDS FREE
SOLDERING
“THE THIRD HAND” WILL FIT ANY
SOLDERING IRON UP TO 7/8”
This handy fixture gives the user a 3rd hand, it holds the iron in place while you assemble and solder. 2 way adjustment with replacement parts available. Fits
any soldering iron up to 7/8” Dia. Made of aluminum and measures 6" x 6' x 12”. SOLD as 1 Unit Without soldering iron. Includes Instructions.
PAGE 25
Oldaker
TEL : (419) 759-3551
www.testleads.net
"TEST WITH THE BEST"
FAX : (419) 759-3312
TEST LEAD WIRE, 14, 18, 20 & 24 GA. RUBBER, PVC, SILICONE
INSUL.
THICK O. D.
.045" .145"
PART #
183
GA. - STRAND
18 (65 X 36)
183A
18 (65 X 36)
.045"
.145"
183B
18 (440 X 002)
.045"
.145"
183C
14 (7x24 X 36)
.033”
.145”
184
20 (41 X 36)
.040"
.120"
184B
20 (10 X 30)
.032"
.102"
990
24 (45 X 40)
.019"
.066"
INSUL.
TYPE
RUBBER
PUT-UP
VOLTAGE
COLORS
IN FEET
5K - 20K RED, BLK, BLU, 10-25-50-100
GRN, YEL, WHT 250-500-1000
PVC
5K - 20K
RED & BLACK 10-25-50-100
250-500-1000
SILICONE 5K - 20K
RED & BLACK 10-25-50-100
250-500-1000
PVC
5K - 20K
RED & BLACK 10-25-50-100
250-500-1000
RUBBER 1.5K - 6K RED & BLACK 10-25-50-100
250-500-1000
PVC
600 V
RED, BLK, BLU, 10-25-50-100
GRN, YEL, WHT 250-500-1000
RUBBER 1K - 10K RED, BLK, BLU, 10-25-50-100
GRN, YEL, WHT 250-500-1000
COAXIAL CABLE, RG 58, RG 59, RG 174
NOM
INSUL.
PART # RG/U O.D. SHIELD
VOLTS
TYPE
288-1 58C .195" T.COPPER P.ETHEL. 1900
588-4
288
IMP.
CAP
pF / FT OHMS COLORS
BLACK
50
29.5
COPPER P.ETHEL.
2300
21.0
75
BLACK
174 .105" T.COPPER P.ETHEL.
1500
30.0
50
BLACK
59
.242"
PUT-UP
IN FEET
10-25-50-100
250-500-1000
10-25-50-100
250-500-1000
10-25-50-100
250-500-1000
COIL CORDS - 1 & 2 CONDUCTOR.
780 = 2 CONDUCTOR 24 GA. PVC INSULATION
.220" O.D. 1 FOOT RETRACTED, 4 FOOT EXTENDED
5/8" DIA. COIL, 12" STRAIGHT ENDS. SOLD AS 1 COLOR,
BLACK.
742 (COLOR) = 1 CONDUCTOR 20 GA. NEOPRENE INSULATION
.165" O.D. 1 FOOT RETRACTED, 5 FOOT EXTENDED
3/4" DIA. COIL, 12" STRAIGHT ENDS. SOLD AS 1 COLOR
RED OR BLACK.
106FF NICKLE PLATED BRASS TIP
106GG NICKLE PLATED NEEDLE TIP
106GG TIP HAS A .080” X .625” STAINLESS STEEL NEEDLE
TIP WITH POLISHED POINT PRESSED INTO A BRASS BODY.
TIP BODY SIZE IS KNURLED TO .198” DIA. AND IS SOLDER
TYPE CONNECTION.
PART IS NICKLE PLATED AND SOLD AS 1 EACH.
O
N
-L
IN
E
A
T
w
w
w
.t
e
tlse
a
d
.sn
e
t.
C
L
IC
K
O
N
C
R
O
S
S
R
E
F
E
R
E
N
C
E
.
F
O
R
A
C
O
M
P
L
E
T
E
U
P
T
O
D
A
T
E
C
R
O
S
S
R
E
F
E
R
E
N
C
E
C
H
E
C
K
106FF TIP HAS A .080” X .625” BRASS TIP.
BODY SIZE IS KNURLED BRASS TO .198” DIA.
AND IS SOLDER TYPE CONNECTION.
PART IS NICKLE PLATED AND SOLD AS 1 EACH.
PAGE 26