VT3
VA P O R T I T E I N D U S T R I A L
Sealed and gasketed enclosure utilizes internal heat for optimal
performance in ambient environments down to -20°F (-29°C).
Surface or chain mount
from supplied mounting
bracket. (chain supplied
by others)
Durable fiberglass housing is reinforced polyester
and self-extinguishing (ASTM-D635-74) plastic of
a permanent pearl gray color.
Polyurethane gasketing is formed in the
housing providing a continuous seamless
seal for the diffuser.
High impact lens options to withstand
the most demanding environments.
UL Listed for wet locations (standard).
UL/CUL Listed. IP65 rated.
Optional IP67 rating with
8 latches. NSF listed.
A watertite hub for 1/2" conduit entry
is provided at each end of housing
(standard) for continuous feed.
Tethered gear tray for tool-less
access to ballast compartment and
hands-free maintenance.
Applications include holding freezers, refrigerated
storage, walk-in freezers, food processing and
outdoor locations.
Ordering Information
Optional die formed high reflective polyester
powder coat or high
performance 95%
Specular reflector.
Factory installed code compliant
disconnect for safe and convenient
means of disconnecting power.
Sample Number: 8TVT3-254T5DR-UNV-EB82-M4-U
Width
Blank=4' Length
8T=8' Length
Series
VT3=Vaportite (Gasketed
Enclosure)
Number of Lamps (3)
1=1 Lamp
2=2 Lamps
3=3 Lamps
(Lamps not included)
Lamp Type
32=32W T8 Lamp
28T5=28W T5 Lamp
54T5=54W T5HO Lamp (3)
Voltage (1)
120V=120 Volt
277V=277 Volt
347V=347 Volt
480V=480 Volt
UNV=Universal
Voltage 120/277V
UNC=Universal
Voltage 347/480V (6)
Options
GL=Single Element Fuse
GM=Double Element Fuse
EL=Emergency Installed (3) (4)
(see table on pg. 48)
Lens
DR=Internal Prismatic Lens/15% DR High Impact
Additive (Standard)
DR-50=50% High Impact Additive
DR-100%=100% High Impact Additive (Extreme)
NOTES: (1) Ballast type used only if ballast & voltage is chosen. (2) Not available when specifying
emergency ballasts, voltage must be specific. (3) EHT2 ballasts are recommended for ambient
temperatures above 102°F (40°C) 3 Lamp 54W T5HO configurations. (4) Emergency option in
3 lamp version must use remote mount test switch. (5) Top Hub required when stem mounting.
(6) 2/3 lamp ballast configurations in EB8/PLUS only for T8 UNC version. (7) Use EHT1 ballast in
ambient temperatures below 0°F (-18°C) on 3 Lamp 54W T5HO configurations.
43
Sturdy cam latches clamp diffuser
tightly for a positive seal between
housing, gasketing and diffuser.
WL=Wet
Ballast Type (1)
Location
T8 Systems
Label
(4)
EB8 =T8 Electronic Instant Start.
Total Harmonic Distortion < 10%
No. of Ballast
1 or 2
EB8 /PLUS=T8 Electronic Instant Start. (4), (6)
High Ballast Factor >1.15.
No. of
Total Harmonic Distortion < 10%
Ballast
1 or 2
ER8 =T8 Electronic Program Rapid Start.(4)
Total Harmonic Distortion < 10%
No. of Ballast
1 or 2
ER8 /PLUS=T8 Electronic Program Start. (4)
High Ballast Factor >1.15.
No. of
Total Harmonic Distortion < 10%
Ballast
1 or 2
T5 Systems
EBT =T5 Linear Electronic Program Rapid Start.
Total Harmonic Distortion < 10%
No. of
Ballast
1 or 2
EHT =T5HO Linear Electronic Program Rapid Start
High Ambient. Total Harmonic Distortion < 10%
No. of Ballast (3), (7)
1 or 2
Packaging
Options
U=Unit Pack
8L=8 Latches (IP67 Rating),
(4' only)
PALC=Job Pack
in Carton
RIF1=Radio Interference
Suppressor
(5)
TH=(2) Top Watertite Hubs
TEH=(2) Top & (2) End Watertite Hubs
(all Watertite Hubs have 1/2" Conduit Entry) (5)
BKS=(2) Snap-on Brackets for Stem or Surface
Mount
M4=Specular Reflector
SSL=Stainless Steel Latches
VRS=Vandal Resistant Screws for Latches
Accessories (order separately)
VT2 Stem Bushing=1/2" – 3/8" (Required when
using Stem/Sets, Requires (1) per (Stem/Set)
VT2-Chain/Set-U=Chain Hanging Set
Includes 6 ft. of chain, 4 large S-Hooks and 4 small
S-Hooks. Order Two (2) Kits for each 4' or 8'
Fixture
VT2-SS-MBK=Stainless Steel Mounting Bracket
VT3-BKS2-PK=(2) Snap-on Brackets for Stem,
Surface or Chain Mount. Adjustable along length
of fixture.