Mk31A Advanced Single Phase Electronic Revenue Meter Papillon Series - Class 1 PRODUCT INFORMATION Mk31A is developed on the advanced Papillon metering platform which has an array of features such as neutral current measurement and tamper detection. KEY FEATURES ANTI TAMPER NEUTRAL CURRENT MEASUREMENT Mk31A Advanced Single Phase Electronic Revenue Meter Papillon Series - Class 1 SPECIFICATIONS Accuracy Display and LEDs • Class 1 • 7-segment LCD • Compliance to IEC 62052-11 and IEC 62053-21 • Large digit LCD with optional backlight: n 8mm (H) x 4mm (W) Voltage n 12.2mm (H) x 5.3mm (W) [optional] • Nominal: 110V (Un) / 220V - 240V (Un) • 7-digit display (decimal customized) • Operating Range: 0.7Un - 1.2Un • Power consumption: <10VA 2W Current • Basic current: 5/10A (Ib) • Maximum current: 60A, 100A • LED creeping indicator • Power consumption: <2.5VA • LED energy pulse output indicator (for energy measurement) Frequency Tamper Evident Features • 50Hz or 60Hz, ±5% • Provision for sealing using seals • Permanent sealed by glue/Breakable screw (optional) Meter Constant • Unbalanced load indicator in LCD (optional) • 1600imp/kWh or 3200imp/kWh Environmental Measurement Modes • Specified Operating Range of -30oC to +70oC • Single Phase 2 Wire with optional neutral current measurement • Limit Operating Range of -40oC to +75oC • Single Phase 3 Wire • Relative humidity of up to 95% (non-condensing) • Measurement Sensor: Shunt Dimensions Measured Values • Approx. 152mm (L) x 88mm (W) x 59mm (D) • Import/Export/Absolute: W-h Pulsing Output • Pulsing LED for energy indication • Energy pulsing output port EDMI Limited 47 Yishun Industrial Park A, Singapore 768724 Tel: +65 6756 2938 | Fax: +65 6756 0125 Email: sgmarketing@edmi-meters.com | sgtechsupport@edmi-meters.com Copyright © 2014 www.edmi-meters.com EDMI Limited. All Rights Reserved. EDMI’s Policy is one of continuous product development and the right is reserved to modify specifications contained herein without notice.