Forecast 4Z
FORUM
The Forecast Z series by
FORUM is a line of hybrid steel
housing/aluminum trim rectilinear
recessed luminaires, designed
PRODUCT
specifically to fit 4” and 6” on center
DESCRIPTION
grid ceiling systems. Matching
sheetrock applications are available
as well.
JOB
TYPE
Arial font
PRODUCT IMAGE
Forecast
4Z 9is or
a 3 larger
3/8” wide
Size
RECESSED/
DIRECT
IN-WALL/
HORIZONTAL
housing with a 2 5/8” aperture and
can be lamped with T5 and T8
lamps as well as LED.
IN-WALL/
VERTICAL
ORDERING CODE
SRZ 44
Series
Trim
LED Spec
TechZone4 - 4”x4”
recessed steel/
aluminum hybrid
FG = 9/16” grid
TG = 15/16” grid
BG = slot grid
F = 1/2” flange
FF = flange-free
95LED30
95LED35
95LED40
95LED50
sheetrock
Shielding
Length
SAT = Satin lens
WOL = White Opal lens
SAP = Satin Lens over
Parabolic Baffle
WP = White Opal over
95LEDxx = 950lm/ft
Parabolic Baffle
xx30 = 3000k temp
xx35 = 3500k temp
xx40 = 4000k temp
xx50 = 5000k temp
*Consult factory
for custom lumen
settings
Voltage
Finish
Option 1
Option 2
120V
WH = White
EC = Emergency Circuit
2 = 2’
3 = 3’
AZ = Anodized EMLED = LED battery pk
277V
4 = 4’
Silver
DIM = Dimming **
UNV = Universal
5 = 5’
CC = Custom
F = Fusing
6 = 6’
Color *
SW = Separate Switch
7 = 7’
OC = Occupancy Sensor
8 = 8’
MR = 37W MR16 Module ***
XX = Specify
P = Perimeter Mounting
run length
in even
foot
* Please provide
increments
custom color RAL # ________________________________
** Please specify dimming
manufacturer/model (if required) ______________________
*** Number of units 6” on center
(Beginning of fixture)/(End of fixture)
TECHNICAL DRAWINGS
* Dimensions provided as general information. Please see shop drawings for specific rough in dimension
3.375 "
FG
0.642 "
9/16” Grid
4.000 "
(T8 +1.0")
BG - Bolt Slot Grid
F - Overlap Flange
(drywall, wood, metal applications)
TG
FF - Flange Free
15/16” Grid
(seamless drywall application)
2.619 "
SPECIFICATION
3.801 "
* Forum reserves the right to change this information at any time
HOUSING: 18 GA cold rolled steel in a pre-paint
TRIM/FLANGE: Extruded Aluminum trim
DRIVER: 0-10V DC dimming standard. 120V,
GEARTRAY / REFLECTOR: Integrated geartray
and reflector made from 16 GA aluminum in a highly
reflective pre-paint white finish. Fully wired unit
remains completely accessible from below.
SHIELDING: Satin frosted and white opal
LISTING: All fixtures bare an AFL-CIO/IBEW
white finish. Built in individual pieces up to 8 ft in
length. Sections can be joined to form continuous
runs.
is run around all 4 sides of the fixture body.
Provides a clean and precise finish and is
available for a number of ceiling applications.
lenses are snap in. Parabolic baffles are
made from high quality aluminum and come
in a variety of finishes.
277V, and Universal Voltage available standard.
5 year warrenty. Please consult factory for
special driver requirements.
union label and are UL listed for recessed dry
location and insulation contact. For alternative
location configurations, please consult factory.
Forum, Inc. - 908 Old Freeport Rd. - Pittsburgh, Pennsylvania 15238 - T: (412) 781-5970 F: (412) 781-5971 - www.forumlighting.com
Forecast 4Z
FORUM
The Forecast Z series by
FORUM is a line of hybrid steel
housing/aluminum trim rectilinear
recessed luminaires, designed
PRODUCT
specifically to fit 4” and 6” on center
DESCRIPTION
grid ceiling systems. Matching
sheetrock applications are available
as well.
JOB
TYPE
RECESSED/
ASYMMETRIC
Arial font
PRODUCT IMAGE
Forecast
4Z-ASY
is a
Size
9 or larger
3 3/8” wide housing with a 1 3/4””
asymmetric aperture that can be
lamped with T5,T8, and LED.
ORDERING CODE
SRZ 44ASY
Series
Trim
LED Spec
Shielding
Length
TechZone4ASY
4”x4” recessed
steel/aluminum
hybrid with
asymmetric
aperture
FG = 9/16” grid
TG = 15/16” grid
BG = slot grid
F = 1/2” flange
FF = flange-free
95LED30
95LED35
95LED40
95LED50
OP = Open
120V
2 = 2’
WH = White
EC = Emergency Circuit
3 = 3’
AZ = Anodized EMLED = LED battery pk
277V
4 = 4’
Silver
DIM = Dimming **
UNV = Universal
5 = 5’
CC = Custom
F = Fusing
6 = 6’
Color *
SW = Separate Switch
7 = 7’
OC = Occupancy Sensor
8 = 8’
MR = 37W MR16 Module ***
XX = Specify
P = Perimeter Mounting
run length
in even
foot
* Please provide
increments
custom color RAL # ________________________________
sheetrock
SAT = Satin lens
WOL = White Opal lens
95LEDxx = 950lm/ft
xx30 = 3000k temp
xx35 = 3500k temp
xx40 = 4000k temp
xx50 = 5000k temp
*Consult factory
for custom lumen
settings
Voltage
Finish
Option 1
Option 2
** Please specify dimming
manufacturer/model (if required) ______________________
*** Number of units 6” on center
(Beginning of fixture)/(End of fixture)
TECHNICAL DRAWINGS
* Dimensions provided as general information. Please see shop drawings for specific rough in dimension
3.375 "
FG
9/16” Grid
0.642 "
4.000 "
(T8 + 1.0")
TG
15/16” Grid
BG - Bolt Slot Grid
SPECIFICATION
F - Overlap Flange
FF - Flange Free
(drywall, wood, metal applications)
(seamless drywall application)
* Forum reserves the right to change this information at any time
1.527 "
4.079 "
HOUSING: 18 GA cold rolled steel in a pre-paint
TRIM/FLANGE: Extruded Aluminum trim
DRIVER: 0-10V DC dimming standard. 120V,
GEARTRAY / REFLECTOR: Integrated geartray
and reflector made from 16 GA aluminum in a highly
reflective pre-paint white finish. Fully wired unit
remains completely accessible from below.
SHIELDING: Satin frosted and white opal
LISTING: All fixtures bare an AFL-CIO/IBEW
white finish. Built in individual pieces up to 8 ft in
length. Sections can be joined to form continuous
runs.
is run around all 4 sides of the fixture body.
Provides a clean and precise finish and is
available for a number of ceiling applications.
lenses are available and are of a lift-and-shift
nature.
277V, and Universal Voltage available standard.
5 year warrenty. Please consult factory for
special driver requirements.
union label and are UL listed for recessed dry
location and insulation contact. For alternative
location configurations, please consult factory.
Forum, Inc. - 908 Old Freeport Rd. - Pittsburgh, Pennsylvania 15238 - T: (412) 781-5970 F: (412) 781-5971 - www.forumlighting.com
Forecast 4Z
FORUM
The Forecast Z series by
FORUM is a line of hybrid steel
housing/aluminum trim rectilinear
recessed luminaires, designed
PRODUCT
specifically to fit 4” and 6” on center
DESCRIPTION
grid ceiling systems. Matching
sheetrock applications are available
as well.
JOB
TYPE
RECESSED/
DIRECT
Arial font
PRODUCT IMAGE
Forecast
4Z-9REC
is a 3 3/8”
Size
or larger
wide housing with a 2 5/8” aperture,
regressed 1 1/8” and can be
lamped with T5,T8, and LED.
ORDERING CODE
SRZ 44REC
Series
Trim
LED Spec
Shielding
Length
TechZone4REC
4”x4” recessed
steel/aluminum
hybrid w/ regressed
lens
FG = 9/16” grid
TG = 15/16” grid
BG = slot grid
F = 1/2” flange
FF = flange-free
95LED30
95LED35
95LED40
95LED50
SAT = Satin lens
120V
WH = White
EC = Emergency Circuit
2 = 2’
3 = 3’
AZ = Anodized EMLED = LED battery pk
277V
4 = 4’
Silver
DIM = Dimming **
UNV = Universal
5 = 5’
CC = Custom
F = Fusing
6 = 6’
Color *
SW = Separate Switch
7 = 7’
OC = Occupancy Sensor
8 = 8’
MR = 37W MR16 Module ***
XX = Specify
P = Perimeter Mounting
run length
in even
foot
* Please provide
increments
custom color RAL # ________________________________
sheetrock
WOL = White Opal lens
95LEDxx = 950lm/ft
xx30 = 3000k temp
xx35 = 3500k temp
xx40 = 4000k temp
xx50 = 5000k temp
*Consult factory
for custom lumen
settings
Voltage
Finish
Option 1
Option 2
** Please specify dimming
manufacturer/model (if required) ______________________
*** Number of units 6” on center
(Beginning of fixture)/(End of fixture)
TECHNICAL DRAWINGS
* Dimensions provided as general information. Please see shop drawings for specific rough in dimension
3.375 "
1.198 "
FG
9/16” Grid
5.249 "
(T8 + 1.0")
TG
15/16” Grid
BG - Bolt Slot Grid
SPECIFICATION
F - Overlap Flange
FF - Flange Free
(drywall, wood, metal applications)
(seamless drywall application)
* Forum reserves the right to change this information at any time
3.215 "
3.801 "
HOUSING: 18 GA cold rolled steel in a pre-paint
TRIM/FLANGE: Extruded Aluminum trim
DRIVER: 0-10V DC dimming standard. 120V,
GEARTRAY / REFLECTOR: Integrated geartray
and reflector made from 16 GA aluminum in a highly
reflective pre-paint white finish. Fully wired unit
remains completely accessible from below.
SHIELDING: Satin frosted and white opal
LISTING: All fixtures bare an AFL-CIO/IBEW
white finish. Built in individual pieces up to 8 ft in
length. Sections can be joined to form continuous
runs.
is run around all 4 sides of the fixture body.
Provides a clean and precise finish and is
available for a number of ceiling applications.
lenses are available. They are of a lift-andshift nature. They have a stepped side profile
for a secure fit.
277V, and Universal Voltage available standard.
5 year warrenty. Please consult factory for
special driver requirements.
union label and are UL listed for recessed dry
location and insulation contact. For alternative
location configurations, please consult factory.
Forum, Inc. - 908 Old Freeport Rd. - Pittsburgh, Pennsylvania 15238 - T: (412) 781-5970 F: (412) 781-5971 - www.forumlighting.com