Benefits
• 3 mil metallic foil shield
with drain wire
• Provides high-quality digital
transmission medium for xDSL
technologies and, when properly
grounded, removes spectrum
interferences
• Non-metallic or fiberglass
strength members
• Provide necessary
longitudinal strength
• Rip cord
• Facilitates jacket removal
OSP CABLE
FTTP
Solid annealed copper
Insulation
Polyolefin
Core Assembly
Individual conductors are carefully twisted
into pairs in a manner designed to
minimize resistance unbalance
Shield
3 mil metallic foil shield with drain wire
Strength Members
Non-metallic or fiberglass strength
members placed in jacket parallel to
core assembly
Rip cord
Placed parallel to the core
Jacket
Weather-resistant PVC
Performance Compliance
Applicable sections of both GR-3163-CORE
and ANSI/ICEA S-89-648-2011
RoHS-compliant
NRTL Programs
UL® Listed
WIRELESS
Conductor
TECH INFO
Features
Specifications
INDEX
ADP S is a PVC-jacketed, aerial service wire designed for use in extending
communications service (voice, data and/or video) to a subscriber
premises from the distribution cable terminal. This product has additional
capabilities over the standard ADP NMS product because it contains a
shielding screen. The core is wrapped within a metallic foil to provide
shielding from interference and thus provide high-quality digital
transmission. In addition, a drain wire runs longitudinally the length of the
wire to drain off Electromagnetic Interference (EMI) and Radio Frequency
Interference (RFI). Without shielding and a drain wire, noise can be
introduced into circuits from high voltage AC power lines, machinery with
motors, x-ray systems, TV sets and AM radio stations. Shielding also
lessens the chance that DSL or other high frequency transmission protocols
will interfere with other signals on adjacent cables. Each conductor is
insulated with solid polyolefin in distinctive colors. The insulation of the
tip conductor is marked with a stripe of the mating ring insulation color to
reduce the possibility of splitting pairs during installation. A black, weather
resistant, polyvinyl chloride jacket is extruded over the yarns and rip cord
to protect the core from mechanical damage, degradation by sunlight and
ingress of moisture. The jacket bonds to the fiberglass strength members
to provide the required strength characteristics.
PREMISES CABLE
Product Description
TABLE OF CONTENTS
ADP S
UL is a registered trademark of UL LLC.
Electrical Specifications
Number of Pairs
Average Mutual Capacitance @ 1,000 Hz
nF/mile (nF/km)
Maximum Pair
94 (58)
Maximum Average
90 (56)
Conductor Size
AWG (mm)
Minimum Insulation Resistance
@ 68°F (20°C)
megohm-mile (megohm-km)
Maximum Average
Attenuation
772 kHz @ 68°F (20°C)
dB/kft (dB/km)
Maximum Conductor
Resistance
@ 68°F (20°C)
Ohms/mile (Ohms/km)
DC Resistance Unbalance
Maximum %
Individual Pair
Conductor to Conductor
Dielectric Strength
Volts DC
3 secs, no breakdown
22 (0.64)
1,000 (1,600)
5.1 (17)
91 (56.5)
5.0
4,000
Crosstalk Loss
dB/kft (dB/km)
Minimum NEXT @ 722 kHz
Capacitance Unbalance @ 1,000 Hz
pF @ 1 kft (pF @ 1 km)
44 (144)
Maximum Individual Pair
80 (145)
Part Numbers and Physical Characteristics
Dimensions
Part Number
Pair Count
AWG (mm)
Minor
in (mm)
Major
in (mm)
Approx. Weight
lbs/kft (kg/km)
Standard Length
ft (m)
12-101-07
1
22 (0.64)
0.21 (5.3)
0.39 (9.9)
37 (49)
1,000 (305)
Package
12-301-07
3
22 (0.64)
0.27 (6.8)
0.45 (11.4)
55 (82)
1,000 (305)
Reel
Reel
12-302-07
3
22 (0.64)
0.27 (6.8)
0.45 (11.4)
55 (82)
400 (122)
POP™ box
12-303-07
3
22 (0.64)
0.27 (6.8)
0.45 (11.4)
55 (82)
750 (229)
Reel
12-304-07
3
22 (0.64)
0.27 (6.8)
0.45 (11.4)
55 (82)
750 (229)
Coil
12-305-07
3
22 (0.64)
0.27 (6.8)
0.45 (11.4)
55 (82)
500 (152)
Reel-in-a-Box
12-501-07
5
22 (0.64)
0.28 (7.1)
0.49 (12.0)
78 (116)
1,000 (305)
Reel
Technical Guideline
Sag and Tension Technical Guidelines are available for these products.
Refer to the “Resources” section on our site for more information.
Rev 7/15
Ed 13.0
All information, content, data, specifications, packaging and part numbers detailed herein are subject to change. For the most up-to-date information, please
visit SuperiorEssex.com. Purchase of this product is subject exclusively to the then current Superior Essex International LP Terms and Conditions of Sale for
Communications and Energy Cable, Wire and Connectivity Products, which can be found on our website, SuperiorEssex.com, or provided to you upon request.
800.551.8948
SuperiorEssex.com
B-117