IEEE 802.16m on Low Duty Cycle Mode of Femtocell Base...

advertisement
IEEE 802.16m on Low Duty Cycle Mode of Femtocell Base Stations
Document Number: IEEE C80216m-09_0821r1
Date Submitted: 2009-05-04
Source:
Ying Li, Zhouyue Pi, Baowei Ji,
Jung Je Son, Anshuman Nigam
Email: yli2@sta.samsung.com
Phone: +1-972-761-7903
Samsung Electronics
Andreas Maeder, Linghang Fan
Email: Andreas.Maeder@nw.neclab.eu; Linghang.Fan@EU.NEC.COM
NEC
Jin Lee, Kiseon Ryu, Ronny Kim
Email: {jins978, ksryu, ronnykim}@lge.com
LG Electronics
Venue:
IEEE Session #61
Base Contributions:
Re:
Change Request for IEEE 802.16m SDD, Section 15
Purpose:
Notice:
Discussion and Approval
This document does not represent the agreed views of the IEEE 802.16 Working Group or any of its subgroups. It represents only the views of the participants listed in
the “Source(s)” field above. It is offered as a basis for discussion. It is not binding on the contributor(s), who reserve(s) the right to add, amend or withdraw material
contained herein.
Release:
The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an
IEEE Standards publication; to copyright in the IEEE’s name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s
sole discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor also acknowledges and accepts that this
contribution may be made public by IEEE 802.16.
Patent Policy:
The contributor is familiar with the IEEE-SA Patent Policy and Procedures:
<http://standards.ieee.org/guides/bylaws/sect6-7.html#6> and <http://standards.ieee.org/guides/opman/sect6.html#6.3>.
Further information is located at <http://standards.ieee.org/board/pat/pat-material.html> and <http://standards.ieee.org/board/pat >.
Low duty cycle mode for open femtocells
• In current SDD, LDC mode is only for CSG femtocells
– “Besides the normal operation mode, CSG Femtocell BSs may support
Low-duty Operation Mode, in order to reduce interference to neighbor
cells.”
• Propose: LDC mode should be also available for open femtocells
– For an open femto BS, it also has chances to have no active user in its
coverage, due to smaller coverage of femtocell
– If open femtocells have LDC mode, it can help reduce interference to
neighbor cells as well.
– LDC for open femtocell can save energy as well.
2
FA information to help MS scan
femtocells in LDC mode (1/3)
• Femtocells can be at different frequency allocations (FA) .
• FA of femtocells is the key information an MS needs to
shorten the time of searching for femtocells
• MS knowing the active timings of LDC of femtocells can help
MS search for femtocells
3
FA information to help MS scan
femtocells in LDC mode (2/3)
• An example
Preamble
Femto1 @ FA1
Regular mode
time
AI
Femto2 @ FA2
LDC mode
UAI
time
AI
UAI
Femto3 @ FA3
LDC mode
MS
AI
UAI
FA others FA
3
2
Scan others
AI
FA2 others FA3
UAI
Scan others
time
time
AI: available interval
UAI: Unavailable interval
4
FA information to help MS scan
femtocells in LDC mode (3/3)
• Macrocell/femtocell may broadcast/unicast femtocell FAs and
LDC patterns
• Femtocell FAs and LDC patterns may be written in MS white
list.
5
Proposed text
15.7 Low Duty Operation Mode
[Remove CSG in the first sentence]
Besides the normal operation mode, CSG Femtocell BSs may
support Low-duty Operation Mode, in order to reduce
interference to neighbor cells.
[Insert the following to the end of 15.7.]
Macrocell/femtocell may broadcast/unicast femtocell FAs and
patterns of low duty cycle over the air.
6
Download