DRAFT: 10/12/04
Contact:
Stuart J. Kerry, Chair of the IEEE 802.11 Working Group
+1 408 474 7356, stuart.kerry@philips.com.
or
Karen McCabe, IEEE Senior Marketing Manager
+1 732 562 3824, k.mccabe@ieee.org
IEEE INITIATES COMMUNICATION STANDARD PROJECT FOR
CARS, TRUCKS, TRAINS AND OTHER VEHICLES
IEEE P802.11p™ Intended to Enable Wireless Local Area Networks
to Foster Vehicular Safety and New Services, e.g., Mobile Internet
PISCATAWAY, N.J., USA, __ October 2004 – The IEEE has begun a project to
develop a standard amendment to IEEE Std 802.11™ to foster wireless communications
from vehicles to the roadside and between vehicles. The purpose of the project., which
has a target completion date of December 2006, is to open opportunities for advances in
collision avoidance, traveler information, toll collection, traffic management and mobile
Internet access, among other uses. Many automakers anticipate installation of devices
based on the standard in the 2008 model year.
The standard development project, IEEE P802.11p™, “Wireless LAN Medium
Access Control (MAC) and Physical Layer (PHY) Specifications: Wireless Access in
Vehicular Environments,” or WAVE, will support wireless local area networks so
automobiles, trucks, trains, ships and other surface vehicles can talk to fixed stations and
each other. The network will accommodate vehicles traveling as fast as 200 km/h (125
mph) and separated by distances to one kilometer.
2
IEEE P802.11p will allow multiple data exchanges in just 4 to 50 milliseconds
utilizing the 5.850-5.925 GHz radio band, a licensed part of the spectrum approved for
vehicular wireless LAN use in the U.S. by the Federal Communication Commission.
Fixed WAVE hot spots will create bidirectional links that can focus tightly on one car or
speak to hundreds of highway vehicles at once across multiple lanes of traffic.
“The main motivation behind WAVE is to make surface transportation safer and
more efficient,” says Lee Armstrong, Chair of the IEEE P802.11p Task Group. “It will
extend the widely used LAN methods in IEEE Std 802.11 to the highway environment.
“This means that, rather than being a stand-alone highway safety protocol,
WAVE will enable a host of commercial motorist services to be delivered via the Internet
or other means. Many state and local government agencies intend to construct highway
infrastructures so access points for vehicular WAVE-based radios are widely available.
We’ve placed this project on a fast track and expect to begin reviewing an initial draft
early in 2005.”
{I think this paragraph ought to be deleted. The first sentence is making a
statement about where the project will end up, but I think this is presumptous since I
don’t see such language in the PAR. The second sentence essentially says that ITS
references “WAVE”, but I think this is inappropriate because there is not even a draft yet.
-RBM}The project will also be coordinated with work underway by ISO Technical
Committee 204/Working Group 16, which is evaluating communication media used on
vehicles worldwide. IEEE P802.11p will be written for global use and will allow
countries to adopt WAVE frequency bands other than those used in North America.
Development of IEEE P802.11p has broad support in the transportation
3
community. Participants in the Working Group for this standard development project
include the US DoT and its counterparts in Canada and Mexico, many state and local
agencies, automakers, device manufacturers and potential service providers.
IEEE P802.11p is being written in concert with other IEEE WAVE-related
projects now underway. These involve IEEE P1609™, which concerns protocols for
specific end uses, and IEEE P1556™, which concerns security and user anonymity.
IEEE P802.11p, when approved, will be a part of the IEEE 802.11™ standards
family that defines how wireless LAN equipment should be manufactured so equipment
from different producers can work together. It will be developed within the IEEE 802.11
Working Group, which is sponsored by the IEEE 802® LAN/MAN Standards Committee
of the IEEE Computer Society. For further information, visit: http://www.ieee802.org.
“I’m pleased to see the application of 802.11 based networks extended to include
innovative applications such as Vehicular Environments by the automotive and
communications experts,” said Paul Nikolich, Chair of the IEEE 802 LAN/MAN
Standards Committee. “The extensive support that this project has is yet another
validation of the value of the standards development to our society and economy.”
About the IEEE Standards Association
The IEEE Standards Association, a globally recognized standards-setting body,
develops consensus standards through an open process that brings diverse parts of an
industry together. These standards set specifications and procedures based on current
scientific consensus. The IEEE-SA has a portfolio of more than 870 completed standards
and more than 400 standards in development. For further information on IEEE-SA see:
4
http://standards.ieee.org/.
About the IEEE
The IEEE has more than 360,000 members in approximately 175 countries.
Through its members, the organization is a leading authority on areas ranging from
aerospace, computers and telecommunications to biomedicine, electric power and
consumer electronics. The IEEE produces nearly 30 percent of the world's literature in
the electrical and electronics engineering, computing and control technology fields. This
nonprofit organization also sponsors or cosponsors more than 300 technical conferences
each year. Additional information about the IEEE can be found at http://www.ieee.org.
# # #