Publications for David Fletcher
Publications for David Fletcher
2016
McClure, D., Kavanagh, J., Fletcher, D., Barton,
G. (2016). Characterizing bubble column
bioreactor performance using computational
fluid dynamics. Chemical Engineering Science,
144, 58-74. <a
href="http://dx.doi.org/10.1016/j.ces.2016.01.01
6">[More Information]</a>
McClure, D., Wang, C., Kavanagh, J., Fletcher,
D., Barton, G. (2016). Experimental
investigation into the impact of sparger design on
bubble columns at high superficial velocities.
Chemical Engineering Research and Design,
106, 205-213. <a
href="http://dx.doi.org/10.1016/j.cherd.2015.12.
027">[More Information]</a>
Mazubert, A., Fletcher, D., Poux, M., Aubin, J.
(2016). Hydrodynamics and mixing in
continuous oscillatory flow reactors-Part II:
Characterisation methods. Chemical Engineering
and Processing, 102, 102-116. <a
href="http://dx.doi.org/10.1016/j.cep.2016.01.00
9">[More Information]</a>
Guo, Z., Fletcher, D., Haynes, B. (2016).
Numerical simulation of annular flow
hydrodynamics in microchannels. Computers
and Fluids, 133, 90-102. <a
href="http://dx.doi.org/10.1016/j.compfluid.2016
.04.017">[More Information]</a>
Paetzold, J., Cochard, S., Fletcher, D., Vassallo,
A. (2016). Wind Effects in Solar Fields with
Various Collector Designs. 21st SolarPACES
International Conference (SolarPACES 2015),
New York: American Institute of Physics (AIP).
<a
href="http://dx.doi.org/10.1063/1.4949023">[Mo
re Information]</a>
2015
Huynh, B., Chen, Y., Fletcher, D., Young, P.,
Zhu, B., Traini, D. (2015). An Investigation into
the Powder Release Behavior from
Capsule-Based Dry Powder Inhalers. Aerosol
Science and Technology, 49(10), 902-911. <a
href="http://dx.doi.org/10.1080/02786826.2015.
1082532">[More Information]</a>
Howard, C., Abbas, A., Langrish, T., Fletcher, D.
(2015). Application of proper orthogonal
decomposition (POD) techniques and
scale-resolving CFD simulations to study
swirling flow in an axisymmetric sudden
expansion. Eleventh International Conference on
CFD in the Minerals and Process Industries,
Melbourne, Australia: CSIRO.
Fletcher, D., McClure, D., Kavanagh, J., Barton,
G. (2015). CFD simulation of industrial bubble
columns: numerical and modelling challenges
and successes. Eleventh International
Conference on CFD in the Minerals and Process
Industries, Melbourne, Australia: CSIRO.
Rizkalla, P., Fletcher, D. (2015). Development of
a slurry abrasion model using an
Eulerian-Eulerian 'two-fluid' approach. Eleventh
International Conference on CFD in the
Minerals and Process Industries, Melbourne,
Australia: CSIRO.
Kavanagh, J., McClure, D., Ronzani, S., Barton,
G., Fletcher, D. (2015). Effect Of Mixing Time
On The Performance of Recombinant E.coli
Fermentations: Comparison Of
Multi-Compartment Approach With CFD. Asia
Pacific Confederation of Chemical Engineering
Congress 2015: APCChE2015, incorporating
CHEMECA 2015, Melbourne: Engineers
Australia.
Dai, Z., Zheng, Z., Fletcher, D., Haynes, B.
(2015). Experimental study of transient
behaviour of laminar flow in zigzag
semi-circular microchannels. Experimental
Thermal and Fluid Science, 68, 644-651. <a
href="http://dx.doi.org/10.1016/j.expthermflusci.
2015.07.001">[More Information]</a>
Zheng, Z., Johnston, A., Fletcher, D., Haynes, B.
(2015). Heat exchanger specification: Coupling
design and surface performance evaluation.
Chemical Engineering Research and Design, 93,
392-401. <a
href="http://dx.doi.org/10.1016/j.cherd.2014.04.
015">[More Information]</a>
McClure, D., Lee, A., Kavanagh, J., Fletcher, D.,
Barton, G. (2015). Impact of surfactant addition
on oxygen mass transfer in a bubble column.
Chemical Engineering and Technology, 38(1),
44-52. <a
href="http://dx.doi.org/10.1002/ceat.201400403"
>[More Information]</a>
Dai, Z., Fletcher, D., Haynes, B. (2015). Impact
of tortuous geometry on laminar flow heat
transfer in microchannels. International Journal
of Heat and Mass Transfer, 83, 382-398. <a
href="http://dx.doi.org/10.1016/j.ijheatmasstrans
fer.2014.12.019">[More Information]</a>
Guo, Z., Fletcher, D., Haynes, B. (2015).
Implementation of a height function method to
alleviate spurious currents in CFD modelling of
annular flow in microchannels. Applied
Mathematical Modelling, 39(16), 4665-4686. <a
href="http://dx.doi.org/10.1016/j.apm.2015.04.0
22">[More Information]</a>
Dai, Z., Fletcher, D., Haynes, B. (2015).
Influence of Tortuous Geometry on the
Hydrodynamic Characteristics of Laminar Flow
in Microchannels. Chemical Engineering and
Publications for David Fletcher
Technology, 38(8), 1406-1415. <a
href="http://dx.doi.org/10.1002/ceat.201400752"
>[More Information]</a>
McClure, D., Aboudha, N., Kavanagh, J.,
Fletcher, D., Barton, G. (2015). Mixing in bubble
column reactors: Experimental study and CFD
modeling. Chemical Engineering Journal, 264,
291-301. <a
href="http://dx.doi.org/10.1016/j.cej.2014.11.090
">[More Information]</a>
McClure, D., Kavanagh, J., Fletcher, D., Barton,
G. (2015). Oxygen transfer in bubble columns at
industrially relevant superficial velocities:
Experimental work and CFD modelling.
Chemical Engineering Journal, 280, 138-146. <a
href="http://dx.doi.org/10.1016/j.cej.2015.06.003
">[More Information]</a>
Whyte, D., Brown, G., Fletcher, D. (2015).
Predicting flow in alumina digestion vessels.
Eleventh International Conference on CFD in
the Minerals and Process Industries, Melbourne,
Australia: CSIRO.
McClure, D., Kavanagh, J., Barton, G., Fletcher,
D. (2015). Progress Towards the Development of
a Validated Model for Industrial Bubble Column
Bioreactors. The 10th European Congress of
Chemical Engineering (ECCE10) / 3rd
European Congress of Applied Biotechnology
(ECAB3) / 5th EPIC European Process
Intensification Conference (EPIC5), Nice,
France.
Mohamed, A., Carrese, R., Fletcher, D., Watkins,
S. (2015). Scale-resolving simulation to predict
the updraught regions over buildings for MAV
orographic lift soaring. Journal of Wind
Engineering and Industrial Aerodynamics,
140(May 2015), 34-48. <a
href="http://dx.doi.org/10.1016/j.jweia.2015.01.0
16">[More Information]</a>
Dai, Z., Guo, Z., Fletcher, D., Haynes, B. (2015).
Taylor flow heat transfer in
microchannels-Unification of liquid-liquid and
gas-liquid results. Chemical Engineering
Science, 138, 140-152. <a
href="http://dx.doi.org/10.1016/j.ces.2015.08.01
2">[More Information]</a>
Chen, Y., Young, P., Fletcher, D., Chan, K.,
Long, E., Lewis, D., Church, T., Traini, D.
(2015). The Effect of Active Pharmaceutical
Ingredients on Aerosol Electrostatic Charges
from Pressurized Metered Dose Inhalers.
Pharmaceutical Research, 32, 2928-2936. <a
href="http://dx.doi.org/10.1007/s11095-015-167
4-6">[More Information]</a>
Chen, Y., Young, P., Fletcher, D., Chan, K.,
Long, E., Lewis, D., Church, T., Traini, D.
(2015). The effect of actuator nozzle designs on
the electrostatic charge generated in pressurised
metered dose inhaler aerosols. Pharmaceutical
Research, 32(4), 1237-1248. <a
href="http://dx.doi.org/10.1007/s11095-014-152
9-6">[More Information]</a>
Callaghan, F., Karkouri, J., Broadhouse, K.,
Evin, M., Fletcher, D., Grieve, S. (2015).
Thoracic aortic aneurysm: 4D flow MRI and
computational fluid dynamics model. Computer
Methods in Biomechanics and Biomedical
Engineering, 18(Suppl 1), 1894-1895. <a
href="http://dx.doi.org/10.1080/10255842.2015.
1069559">[More Information]</a>
McClure, D., Norris, H., Kavanagh, J., Fletcher,
D., Barton, G. (2015). Towards a CFD model of
bubble columns containing significant surfactant
levels. Chemical Engineering Science, 127(May
2015), 189-201. <a
href="http://dx.doi.org/10.1016/j.ces.2015.01.02
5">[More Information]</a>
Watkins, S., Mohamed, A., Fisher, A., Clothier,
R., Carrese, R., Fletcher, D. (2015). Towards
Autonomous MAV Soaring in Cities: CFD
Simulation, EFD Measurement and Flight Trials.
International Journal of Micro Air Vehicles,
7(4), 441-448.
Paetzold, J., Cochard, S., Fletcher, D., Vassallo,
A. (2015). Wind effects on parabolic trough
collectors at different positions in the solar field.
17th Australasian Wind Engineering Society
Workshop, Wellington: AWES (Australasian
Wind Engineering Society).
Paetzold, J., Cochard, S., Fletcher, D., Vassallo,
A. (2015). Wind effects on parabolic trough solar
collectors with staggered mirror elements. 14th
International Conference on Wind Engineering,
online: Energy Procedia.
Paetzold, J., Cochard, S., Fletcher, D., Vassallo,
A. (2015). Wind engineering analysis of
parabolic trough collectors to optimise wind
loads and heat loss. Energy Procedia, 69,
168-177. <a
href="http://dx.doi.org/10.1016/j.egypro.2015.03
.020">[More Information]</a>
2014
Guo, Z., Fletcher, D., Haynes, B. (2014). A
Review of Computational Modelling of Flow
Boiling in Microchannels. The Journal of
Computational Multiphase Flows, 6(2), 79-110.
<a
href="http://dx.doi.org/10.1260/1757-482X.6.2.7
9">[More Information]</a>
Cheng, S., Fletcher, D., Hemley, S., Stoodley,
M., Bilston, L. (2014). Corrigendum to "Effects
of fluid structure interaction in a three
dimensional model of the spinal subarachnoid
space" [J. Biomech. 47, 11, (2014), 2826-2830].
Publications for David Fletcher
Journal of Biomechanics, 47(14), 3590-3590. <a
href="http://dx.doi.org/10.1016/j.jbiomech.2014.
09.024">[More Information]</a>
McClure, D., Kavanagh, J., Fletcher, D., Barton,
G. (2014). Development of a CFD Model of
Bubble Column Bioreactors: Part Two Comparison of Experimental Data and CFD
Predictions. Chemical Engineering and
Technology, 37(1), 131-140. <a
href="http://dx.doi.org/10.1002/ceat.201300546"
>[More Information]</a>
Brown, G., Whyte, D., Fletcher, D. (2014).
Dynamic flow modelling in precipitator vessels A study of turbulence modelling approaches.
Applied Mathematical Modelling, 38(17-18),
4163-4174. <a
href="http://dx.doi.org/10.1016/j.apm.2013.11.0
05">[More Information]</a>
Cheng, S., Fletcher, D., Hemley, S., Stoodley,
M., Bilston, L. (2014). Effects of fluid structure
interaction in a three dimensional model of the
spinal subarachnoid space. Journal of
Biomechanics, 47(11), 2826-2830. <a
href="http://dx.doi.org/10.1016/j.jbiomech.2014.
04.027">[More Information]</a>
Leung, S., Gupta, R., Fletcher, D., Haynes, B.
(2014). Experimental Investigation of Taylor and
Intermittent Slug-annular/Annular Flow in
Microchannels. Experimental Heat Transfer,
27(4), 360-375. <a
href="http://dx.doi.org/10.1080/08916152.2013.
849460">[More Information]</a>
McClure, D., Deligny, J., Kavanagh, J., Fletcher,
D., Barton, G. (2014). Impact of Surfactant
Chemistry on Bubble Column Systems.
Chemical Engineering and Technology, 37(4),
652-658. <a
href="http://dx.doi.org/10.1002/ceat.201300711"
>[More Information]</a>
Cochard, S., Paetzold, J., Fletcher, D., Earl, T.,
Mohamad Khairuddi, M., Fathieh, S. (2014).
Numerical simulations of the mixing potential of
a high-rise inclined building. 16th Australasian
Wind Engineering Society Workshop (AWES
2013), Brisbane, Australia: Australasian Wind
Engineering Society.
Liovic, P., Witt, P., Prakash, M., Solnordal, C.,
Fletcher, D. (2014). Preface to special issue of
selected papers from CFD in the minerals and
process industries. Applied Mathematical
Modelling, 38(17-18), 4161-4162. <a
href="http://dx.doi.org/10.1016/j.apm.2014.06.0
01">[More Information]</a>
Chen, Y., Young, P., Fletcher, D., Chan, H.,
Long, E., Lewis, D., Church, T., Traini, D.
(2014). The Influence of Actuator Materials and
Nozzle Designs on Electrostatic Charge of
Pressurised Metered Dose Inhaler (pMDI)
Formulations. Pharmaceutical Research, 31(5),
1325-1337. <a
href="http://dx.doi.org/10.1007/s11095-013-125
3-7">[More Information]</a>
Zheng, Z., Fletcher, D., Haynes, B. (2014).
Transient laminar heat transfer simulations in
periodic zigzag channels. International Journal
of Heat and Mass Transfer, 71, 758-768. <a
href="http://dx.doi.org/10.1016/j.ijheatmasstrans
fer.2013.12.056">[More Information]</a>
McClure, D., Norris, H., Kavanagh, J., Fletcher,
D., Barton, G. (2014). Validation of a
Computationally Efficient Computational Fluid
Dynamics (CFD) Model for Industrial Bubble
Column Bioreactors. Industrial & Engineering
Chemistry Research, 53(37), 14526-14543. <a
href="http://dx.doi.org/10.1021/ie501105m">[M
ore Information]</a>
Paetzold, J., Cochard, S., Vassallo, A., Fletcher,
D. (2014). Wind engineering analysis of
parabolic trough solar collectors: The effects of
varying the trough depth. Journal of Wind
Engineering and Industrial Aerodynamics, 135,
118-128. <a
href="http://dx.doi.org/10.1016/j.jweia.2014.10.0
17">[More Information]</a>
Paetzold, J., Cochard, S., Fletcher, D., Vassallo,
A. (2014). Wind Flow around Parabolic Trough
Solar Collectors - A Parametric Study for
Optimisation of Wind Forces and Heat Losses.
Solar2014: The 52nd Annual Conference of the
Australian Solar Council, Melbourne: Australian
Solar Council.
Paetzold, J., Cochard, S., Vassallo, A., Fletcher,
D. (2014). Wind flow around parabolic trough
solar collectors - a parametric study for
optimisation of wind forces and heat losses.
Solar 2014 Scientific Conference, online: Energy
Procedia.
2013
Zheng, Z., Fletcher, D., Haynes, B. (2013).
Chaotic advection in steady laminar heat transfer
simulations: Periodic zigzag channels with
square cross-sections. International Journal of
Heat and Mass Transfer, 57(1), 274-284. <a
href="http://dx.doi.org/10.1016/j.ijheatmasstrans
fer.2012.10.029">[More Information]</a>
Russell, J., Kelson, N., Barry, M., Pearcy, M.,
Fletcher, D., Winter, C. (2013). Computational
fluid dynamic analysis of intracranial aneurysmal
bleb formation. Neurosurgery, 73(6), 1061-1069.
<a
href="http://dx.doi.org/10.1227/NEU.000000000
0000137">[More Information]</a>
Clarke, E., Fletcher, D., Stoodley, M., Bilston, L.
(2013). Computational fluid dynamics modelling
Publications for David Fletcher
of cerebrospinal fluid pressure in Chiari
malformation and syringomyelia. Journal of
Biomechanics, 46(11), 1801-1809. <a
href="http://dx.doi.org/10.1016/j.jbiomech.2013.
05.013">[More Information]</a>
McClure, D., Kavanagh, J., Fletcher, D., Barton,
G. (2013). Development of a CFD model of
bubble column bioreactors: Part one - A detailed
experimental study. Chemical Engineering and
Technology, 36(12), 2065-2070. <a
href="http://dx.doi.org/10.1002/ceat.201300544"
>[More Information]</a>
More Information]</a>
2012
Lee Wo, D., Tanner, R., Fletcher, D. (2012). A
numerical treatment of crystallization in tube
flow. Polymer Engineering and Science, 52(6),
1356-1366. <a
href="http://dx.doi.org/10.1002/pen.23067">[Mo
re Information]</a>
Bie, W., Srzednicki, G., Fletcher, D. (2013).
Hydrodynamics Modeling of Corn Drying in a
Triangular Spouted Bed Dryer. Acta
Horticulturae, 1011, 169-178.
Bertholds, A., Cochard, S., Fletcher, D. (2012).
CFD Simulations of the New University of
Sydney Boundary Layer Closed Circuit Wind
Tunnel. 15th Australasian Wind Engineering
Society (AWES) Workshop, Sydney, Australia:
AWES (Australasian Wind Engineering
Society).
Gupta, R., Leung, S., Manica, R., Fletcher, D.,
Haynes, B. (2013). Hydrodynamics of
liquid-liquid Taylor flow in microchannels.
Chemical Engineering Science, 92, 180-189. <a
href="http://dx.doi.org/10.1016/j.ces.2013.01.01
3">[More Information]</a>
Brown, G., Whyte, D., Fletcher, D. (2012).
Dynamic Flow Modelling in precipitator vessels
- a comparative study of turbulence modelling
approaches. Ninth International Conference on
CFD in the Minerals and Process Industries,
Melbourne: CSIRO.
Zheng, Z., Fletcher, D., Haynes, B. (2013).
Laminar heat transfer simulations for periodic
zigzag semicircular channels: Chaotic advection
and geometric effects. International Journal of
Heat and Mass Transfer, 62, 391-401. <a
href="http://dx.doi.org/10.1016/j.ijheatmasstrans
fer.2013.02.073">[More Information]</a>
Leung, S., Gupta, R., Fletcher, D., Haynes, B.
(2012). Effect of flow characteristics on Taylor
flow heat transfer. Industrial and Engineering
Chemistry Research, 51(4), 2010-2020. <a
href="http://dx.doi.org/10.1021/ie200610k">[Mo
re Information]</a>
Fletcher, D., Haynes, B., Aubin, J., Xuereb, C.
(2013). Modeling of Microfluidic Devices. In
Volker Hessel, Albert Renken, Jaap C. Schouten,
Jun-i (Eds.), Micro Process Engineering : A
Comprehensive Handbook, (pp. 117-144).
Germany: Wiley - V C H Verlag GmbH & Co.
KGaA.
Liu, Y., Fletcher, D., Haynes, B. (2013). On the
importance of upstream compressibility in
microchannel boiling heat transfer. International
Journal of Heat and Mass Transfer, 58(1-2),
503-512. <a
href="http://dx.doi.org/10.1016/j.ijheatmasstrans
fer.2012.11.068">[More Information]</a>
Chen, Y., Traini, D., Fletcher, D., Chan, K.,
Lewis, D., Church, T., Young, P. (2013). The
effect of pressurized metered dose inhaler
(pMDI) actuator nozzle design on
triboelectrification and aerosol deposition. RDD
Europe 2013 Respiratory Drug Delivery,
Richmond, VA: Virginia Commonwealth
University.
Gupta, R., Leung, S., Manica, R., Fletcher, D.,
Haynes, B. (2013). Three Dimensional Effects in
Taylor Flow
in Circular Microchannels. La Houille Blanche,
2, 60-67. <a
href="http://dx.doi.org/10.1051/lhb/2013017">[
Leung, S., Fletcher, D., Haynes, B. (2012).
Experimental investigation of Taylor and
intermittent slug-annular/annular flow in
microchannels. 3rd European Conference on
Microfluidics, Heidelberg, Germany: Karlsruhe
University.
Montlaur, A., Cochard, S., Fletcher, D. (2012).
Formation of tip-vortices on triangular
prismatic-shaped cliffs. Part 2: A computational
fluid dynamics study. Journal of Wind
Engineering and Industrial Aerodynamics,
109(5), 21-30. <a
href="http://dx.doi.org/10.1016/j.jweia.2012.06.0
04">[More Information]</a>
Leung, S., Gupta, R., Fletcher, D., Haynes, B.
(2012). Gravitational effect on Taylor flow in
horizontal microchannels. Chemical Engineering
Science, 69(1), 553-564. <a
href="http://dx.doi.org/10.1016/j.ces.2011.11.01
6">[More Information]</a>
Cheng, S., Stoodley, M., Wong, J., Hemley, S.,
Fletcher, D., Bilston, L. (2012). The presence of
arachnoiditis affects the
characteristics of CSF flow in the spinal
subarachnoid space: A modelling study. Journal
of Biomechanics, 45(7), 1186-1191. <a
href="http://dx.doi.org/10.1016/j.jbiomech.2012.
01.050">[More Information]</a>
Hicks, C., See, H., Fletcher, D., Ekwebelam, C.
Publications for David Fletcher
(2012). The shear rheology of bread dough:
Analysis of local flow behaviour using CFD.
Food and Bioproducts Processing, 90(3),
361-369. <a
href="http://dx.doi.org/10.1016/j.fbp.2012.01.00
1">[More Information]</a>
Wong, W., Fletcher, D., Traini, D., Chan, K.,
Young, P. (2012). The use of computational
approaches in inhaler development. Advanced
Drug Delivery Reviews, 64(4), 312-322. <a
href="http://dx.doi.org/10.1016/j.addr.2011.10.0
04">[More Information]</a>
Gupta, R., Manica, R., Leung, S., Fletcher, D.,
Haynes, B. (2012). Three-dimensional effects in
Taylor flow in circular microchannels. 3rd
European Conference on Microfluidics,
Heidelberg, Germany: Karlsruhe University.
Asadolahi, A., Gupta, R., Leung, S., Fletcher, D.,
Haynes, B. (2012). Validation of a CFD model
of Taylor flow hydrodynamics and heat transfer.
Chemical Engineering Science, 69(1), 541-552.
<a
href="http://dx.doi.org/10.1016/j.ces.2011.11.01
7">[More Information]</a>
Leung, S., Gupta, R., Hagnefelt, H., Fletcher, D.,
Haynes, B. (2011). Gravitational effect on Taylor
flow in horizontal microchannels. 2nd Australian
and New Zealand Micro and Nanofluidics
Symposium.
Wong, W., Fletcher, D., Traini, D., Chan, K.,
Crapper, J., Young, P. (2011). Particle
Aerosolisation and Break-Up in Dry Powder
Inhalers: Evaluation and Modelling of Impaction
Effects for Agglomerated Systems. Journal of
Pharmaceutical Sciences, 100(7), 2744-2754. <a
href="http://dx.doi.org/10.1002/jps.22503">[Mor
e Information]</a>
Wong, W., Fletcher, D., Traini, D., Chan, K.,
Crapper, J., Young, P. (2011). Particle
Aerosolisation and Break-up in Dry Powder
Inhalers: Evaluation and Modelling of the
Influence of Grid Structures for Agglomerated
Systems. Journal of Pharmaceutical Sciences,
100(11), 4710-4721. <a
href="http://dx.doi.org/10.1002/jps.22663">[Mor
e Information]</a>
2010
Asadolahi, A., Leung, S., Gupta, R., Fletcher, D.,
Haynes, B. (2012). Validation of an Efficient
Computational Fluid Dynamics Modelling
Approach for Taylor Flow Heat Transfer. 12th
International Conference on Microreaction
Technology, Netherlands: Elsevier BV.
Cheung, C., Fletcher, D., Barton, G. (2010). A
computational fluid dynamics model for
co-deposition of silica and germania in the
MCVD process. Journal of Non-Crystalline
Solids, 356(1), 24-31. <a
href="http://dx.doi.org/10.1016/j.jnoncrysol.200
9.09.025">[More Information]</a>
Cochard, S., Montlaur, A., Fletcher, D.,
Letchford, C., Earl, T. (2012). Vortex formation
above prismatic-shaped cliffs; an experimental
and numerical investigation. 15th Australasian
Wind Engineering Society (AWES) Workshop,
Sydney, Australia: AWES (Australasian Wind
Engineering Society).
Gupta, R., Fletcher, D., Haynes, B. (2010). CFD
modelling of flow and heat transfer in the Taylor
flow regime. Chemical Engineering Science,
65(6), 2094-2107. <a
href="http://dx.doi.org/10.1016/j.ces.2009.12.00
8">[More Information]</a>
2011
Singh, H., Fletcher, D., Nijdam, J. (2011). An
assessment of different turbulence models for
predicting flow in a baffled tank stirred with a
Rushton turbine. Chemical Engineering Science,
66(23), 5976-5988. <a
href="http://dx.doi.org/10.1016/j.ces.2011.08.01
8">[More Information]</a>
Asadolahi, A., Gupta, R., Fletcher, D., Haynes,
B. (2011). CFD approaches for the simulation of
hydrodynamics and heat transfer in Taylor flow.
Chemical Engineering Science, 66(22),
5575-5584. <a
href="http://dx.doi.org/10.1016/j.ces.2011.07.04
7">[More Information]</a>
Leung, S., Gupta, R., Fletcher, D., Haynes, B.
(2011). Flow and heat transfer characteristics of
Taylor flow in microchannels. 2nd Australian
and New Zealand Micro and Nanofluidics
Symposium.
Tierney, C., Wood, S., Harris, A., Fletcher, D.
(2010). Computational Fluid Dynamics
Modelling of Ultra-lean Porous Burners.
Progress in Computational Fluid Dynamics,
10(5-6), 352-365. <a
href="http://dx.doi.org/10.1504/PCFD.2010.035
369">[More Information]</a>
Fouilland, T., Fletcher, D., Haynes, B. (2010).
Film and slug behaviour in intermittent
slug-annular microchannel flows. Chemical
Engineering Science, 65(19), 5344-5355. <a
href="http://dx.doi.org/10.1016/j.ces.2010.07.00
4">[More Information]</a>
Leung, S., Liu, Y., Fletcher, D., Haynes, B.
(2010). Heat Transfer in Well-Characterised
Taylor Flow. Chemical Engineering Science,
65(24), 6379-6388. <a
href="http://dx.doi.org/10.1016/j.ces.2010.09.01
4">[More Information]</a>
Gupta, R., Fletcher, D., Haynes, B. (2010). Heat
Transfer Modelling for Taylor Flow in
Publications for David Fletcher
Microchannels. IMRET 11, Japan.
Mason, M., Wood, G., Fletcher, D. (2010).
Numerical investigation of the influence of
topography on simulated downburst wind fields.
Journal of Wind Engineering and Industrial
Aerodynamics, 98(1), 21-33. <a
href="http://dx.doi.org/10.1016/j.jweia.2009.08.0
11">[More Information]</a>
Mason, M., Fletcher, D., Wood, G. (2010).
Numerical Simulation of Idealised
Three-Dimensional Downburst Wind fields.
Engineering Structures, 32(11), 3558-3572. <a
href="http://dx.doi.org/10.1016/j.engstruct.2010.
07.024">[More Information]</a>
Gupta, R., Hagnefelt, H., Fletcher, D., Haynes,
B. (2010). On the Importance of Buoyancy for
Taylor Flow in Horizontal Microchannels. 7th
International Conference on Multiphase Flow
ICMF 2010, Florida: University of Florida.
Wong, W., Fletcher, D., Traini, D., Chan, K.,
Crapper, J., Young, P. (2010). Particle
Aerosolisation and Break-up in Dry Powder
Inhalers 1: Evaluation and Modelling of Venturi
Effects for Agglomerated Systems.
Pharmaceutical Research, 27(7), 1367-1376. <a
href="http://dx.doi.org/10.1007/s11095-010-012
8-4">[More Information]</a>
Gupta, R., Fletcher, D., Haynes, B. (2010).
Taylor Flow in Microchannels: A Review of
Experimental and Computational Work. The
Journal of Computational Multiphase Flows,
2(1), 1-31. <a
href="http://dx.doi.org/10.1260/1757-482X.2.1.1
">[More Information]</a>
Bilston, L., Stoodley, M., Fletcher, D. (2010).
The influence of the relative timing of arterial
and subarachnoid space pulse waves on spinal
perivascular cerebrospinal fluid flow as a
possible factor in syrinx development Laboratory
investigation. Journal of Neurosurgery, 112(4),
808-813. <a
href="http://dx.doi.org/10.3171/2009.5.JNS0894
5">[More Information]</a>
Wong, W., Adi, H., Traini, D., Chan, K.,
Fletcher, D., Crapper, J., Young, P. (2010). Use
of Rapid Prototyping and Computational Fluid
Dynamics in the Design of DPI Devices. RDD
2010 Florida Respiratory Drug Delivery, United
States: Davis Healthcare International
Publishing.
2009
Torre, J., Higgins, P., Xuereb, C., Fletcher, D.
(2009). A novel method to include the free
surface in a CFD model of jet injection into
partially-baffled mixing vessels. Progress in
Computational Fluid Dynamics, 9(6-7), 368-374.
<a
href="http://dx.doi.org/10.1504/PCFD.2009.027
367">[More Information]</a>
Fletcher, D., Geyer, P., Haynes, B. (2009).
Assessment of the SST and omega-based
Reynolds stress models for the prediction of flow
and heat transfer in a square-section U-bend.
Computational Thermal Sciences, 1(4), 385-403.
<a
href="http://dx.doi.org/10.1615/ComputThermal
Scien.v1.i4.20">[More Information]</a>
Coates, M., Tang, P., Chan, K., Fletcher, D.,
Raper, J. (2009). Characterization of
pharmaceutical aerosols and dry powder inhalers
for pulmonary drug delivery. In Sigmund W,
El-Shall H, Shah D, Moudgil B (Eds.),
Particulate Systems in Nano and
Biotechnologies, (pp. 193-222). Boca Raton,
USA: CRC Press.
Wood, S., Fletcher, D., Joseph, S., Dawson, A.,
Harris, A. (2009). Design and evaluation of a
porous burner for the mitigation of
anthropogenic methane emissions.
Environmental Science and Technology, 43(24),
9329-9334. <a
href="http://dx.doi.org/10.1021/es902367x">[M
ore Information]</a>
Cheung, C., Fletcher, D., Barton, G. (2009).
Impact of chlorine dissociation for modified
chemical vapor deposition. Journal of
Non-Crystalline Solids, 355(13), 817-820. <a
href="http://dx.doi.org/10.1016/j.jnoncrysol.200
9.03.003">[More Information]</a>
Mason, M., Wood, G., Fletcher, D. (2009).
Influence of tilt and surface roughness on the
outflow wind field of an impinging jet. Wind and
Structures, 12(3), 179-204.
Fletcher, D., Haynes, B., Aubin, J., Xuereb, C.
(2009). Modeling of microfluidic devices. In
Volker Hessel, Albert Renken, Jaap C. Schouten,
Jun-i (Eds.), Micro Process Engineering : A
Comprehensive Handbook, (pp. 117-144).
Germany: Wiley - V C H Verlag GmbH & Co.
KGaA.
Mason, M., Wood, G., Fletcher, D. (2009).
Numerical simulation of downburst winds.
Journal of Wind Engineering and Industrial
Aerodynamics, 97(11-12), 523-539. <a
href="http://dx.doi.org/10.1016/j.jweia.2009.07.0
10">[More Information]</a>
Fletcher, D., Brown, G. (2009). Numerical
simulation of solid suspension via mechanical
agitation: effect of the modelling approach,
turbulence model and hindered settling drag law.
International Journal of Computational Fluid
Dynamics, 23(2), 173-187. <a
href="http://dx.doi.org/10.1080/1061856080268
Publications for David Fletcher
0211">[More Information]</a>
Gupta, R., Fletcher, D., Haynes, B. (2009). On
the CFD modelling of Taylor flow in
microchannels. Chemical Engineering Science,
64(12), 2941-2950. <a
href="http://dx.doi.org/10.1016/j.ces.2009.03.01
8">[More Information]</a>
Fletcher, D., Langrish, T. (2009). Scale-adaptive
simulation (SAS) modelling of a pilot-scale
spray dryer. Chemical Engineering Research and
Design, 87(10), 1371-1378. <a
href="http://dx.doi.org/10.1016/j.cherd.2009.03.
006">[More Information]</a>
Cheung, C., Fletcher, D., Barton, G., McNamara,
P. (2009). Simulation of particle transport and
deposition in the modified chemical vapor
deposition process. Journal of Non-Crystalline
Solids, 355, 327-334. <a
href="http://dx.doi.org/10.1016/j.jnoncrysol.200
8.11.009">[More Information]</a>
2008
Fletcher, D. (2008). A Novel Method to Include
the Free Surface in a CFD Model of Jet Injection
into Partially-Baffled Mixing Vessels. 2008
ANSYS Australiasian User Conference. LEAP
Pty Ltd.
Torre, J., Fletcher, D., Lasuye, T., Xuereb, C.
(2008). An experimental and CFD study of liquid
jet injection into a partially baffled mixing
vessel: A contribution to process safety by
improving the quenching of runaway reations.
Chemical Engineering Science, 63(4), 924-942.
<a
href="http://dx.doi.org/10.1016/j.ces.2007.10.03
1">[More Information]</a>
Nijdam, J., Langrish, T., Fletcher, D. (2008).
Assessment of an Eulerian CFD model for
prediction of dilute dispersion in turbulent jet.
Applied Mathematical Modelling, 32(12),
2686-2705. <a
href="http://dx.doi.org/10.1016/j.apm.2007.09.0
16">[More Information]</a>
Couerbe, G., Fletcher, D., Xuereb, C., Poux, M.
(2008). Impact of thixotropy on flow patterns
induced in a stirred tank: Numerical and
experimental studies. Chemical Engineering
Research and Design, 86(6), 545-553. <a
href="http://dx.doi.org/10.1016/j.cherd.2007.11.
010">[More Information]</a>
Torre, J., Fletcher, D., Touche, I., Lasuye, T.,
Xuereb, C. (2008). Jet injection studies for
partially baffled mixing reactors: Ageneral
correlation for the jet trajectory and jet
penetration depth. Chemical Engineering
Research and Design, 86(10), 1117-1127. <a
href="http://dx.doi.org/10.1016/j.cherd.2008.05.
005">[More Information]</a>
Bessiere, Y., Fletcher, D., Bacchin, P. (2008).
Numerical simulation of colloid dead-end
filtration: Effect of membrane characteristics and
operating conditions on matter accumulation.
Journal of Membrane Science, 313(1-2), 52-59.
<a
href="http://dx.doi.org/10.1016/j.memsci.2007.1
2.064">[More Information]</a>
Cheung, C., Fletcher, D., Barton, G., McNamara,
P. (2008). Numerical Simulation of silica
deposition in the Modified Chemical Vapour
Deposition Process. CHT-08 : Advances in
Computation Heat Transfer, 50 Cross Highway;
Redding, CT 06896-2404, USA: Begell House
Inc.
Tang, P., Fletcher, D., Chan, K., Raper, J.
(2008). Simple and cost-effective powder
disperser for aerosol particle size measurement.
Powder Technology, 187(1), 27-36. <a
href="http://dx.doi.org/10.1016/j.powtec.2008.01
.003">[More Information]</a>
Gupta, R., Geyer, P., Fletcher, D., Haynes, B.
(2008). Thermohydraulic performance of a
periodic trapezoidal channel with a triangular
cross-section. International Journal of Heat and
Mass Transfer, 51(11-12), 2925-2929. <a
href="http://dx.doi.org/10.1016/j.ijheatmasstrans
fer.2007.09.017">[More Information]</a>
Kor, Y., Prince, R., Fletcher, D. (2008). Using
CFD to identify means of reducing consumption
for mixing and suspension in paper pulp stock
chests. Asia-Pacific Journal of Chemical
Engineering, 3(2), 144-150. <a
href="http://dx.doi.org/10.1002/apj.126">[More
Information]</a>
2007
Rosaguti, N., Fletcher, D., Haynes, B. (2007). A
general implementation of the H1 boundary
condition in CFD simulations of heat transfer in
swept passages. International Journal of Heat
and Mass Transfer, 50(9-10), 1833-1842. <a
href="http://dx.doi.org/10.1016/j.ijheatmasstrans
fer.2006.10.009">[More Information]</a>
Torre, J., Fletcher, D., Lasuye, T., Xuereb, C.
(2007). An experimental and computational
study of the vortex shape in a partially baffled
agitated vessel. Chemical Engineering Science,
62(7), 1915-1926. <a
href="http://dx.doi.org/10.1016/j.ces.2006.12.02
0">[More Information]</a>
Alexiadis, A., Wiley, D., Vishnoi, A., Lee, R.,
Fletcher, D., Bao, J. (2007). CFD modelling of
reverse osmosis membrane flow and validation
with experimental results. Desalination, 217,
242-250. <a
href="http://dx.doi.org/10.1016/j.desal.2007.02.0
14">[More Information]</a>
Publications for David Fletcher
Mason, M., Wood, G., Fletcher, D. (2007).
Impinging jet simulation of stationary downburst
flow over topography. Wind and Structures,
10(5), 437-462.
Coates, M., Chan, K., Fletcher, D., Chiou, H.
(2007). Influence of Mouthpiece Geometry on
the Aerosol Delivery Performance of a Dry
Powder Inhaler. Pharmaceutical Research,
24(8), 1450-1456. <a
href="http://dx.doi.org/10.1007/s11095-007-926
2-z">[More Information]</a>
Aubin, J., Kresta, S., Bertrand, J., Xuereb, C.,
Fletcher, D. (2006). Alternate operating methods
for improving the performance of continuous
stirred tank reactors. Chemical Engineering
Research and Design, 84(A7), 569-582.
Wood, S., Fletcher, D., Joseph, M., Dawson, A.,
Harris, A. (2006). Design of a porous burner for
the oxidation of methane in mine ventilation air.
CHEMECA 2006 Knowledge and Innovation,
Auckland, New Zealand: Auckland University
Press.
Geyer, P., Fletcher, D., Haynes, B. (2007).
Laminar flow and heat transfer in a periodic
trapezoidal channel with semi-circular
cross-section. International Journal of Heat and
Mass Transfer, 50(17-18), 3471-3480. <a
href="http://dx.doi.org/10.1016/j.ijheatmasstrans
fer.2007.01.050">[More Information]</a>
Alexiadis, A., Bao, J., Fletcher, D., Wiley, D.,
Clements, D. (2006). Dynamic response of a
high-pressure reverse osmosis membrane
simulation to time dependent disturbances.
Desalination, 191(1-3), 397-403. <a
href="http://dx.doi.org/10.1016/j.desal.2005.07.0
31">[More Information]</a>
Alexiadis, A., Wiley, D., Fletcher, D., Bao, J.
(2007). Laminar flow transitions in a 2D channel
with circular spacers. Industrial and Engineering
Chemistry Research, 46(16), 5387-5396.
Coates, M., Chan, K., Fletcher, D., Raper, J.
(2006). Effect of design on the performance of a
dry powder inhaler using computational fluid
dynamics. Part 2: Air inlet size. Journal of
Pharmaceutical Sciences, 95(6), 1382-1392. <a
href="http://dx.doi.org/10.1002/jps.20603">[Mor
e Information]</a>
Rosaguti, N., Fletcher, D., Haynes, B. (2007).
Low-Reynolds number heat transfer
enhancement in sinusoidal channels. Chemical
Engineering Science, 62(3), 694-702. <a
href="http://dx.doi.org/10.1016/j.ces.2006.09.04
5">[More Information]</a>
Cheung, C., Haley, D., Fletcher, D., Barton, G.,
McNamara, P. (2007). Simulation of
particle-vortex interactions in the modified
chemical vapor deposition process. Journal of
Non-Crystalline Solids, 353(44-46), 4046-4075.
Torre, J., Fletcher, D., Lasuye, T., Xuereb, C.
(2007). Single and multiphase CFD approaches
for modelling partially baffled stirred vessels:
Comparison of experimental data with numerical
predictions. Chemical Engineering Science,
62(22), 6246-6262. <a
href="http://dx.doi.org/10.1016/j.ces.2007.06.04
4">[More Information]</a>
Torre, J., Fletcher, D., Lasuye, T., Xuereb, C.
(2007). Transient hydrodynamics and free
surface capture of an under-baffled stirred tank
during stopping. Chemical Engineering Research
and Design, 85(A5), 626-636.
2006
Elgebrandt, R., Fletcher, D., Gomes, V.,
Romagnoli, J. (2006). A framework for modeling
particle size effects in emulsion polymerization
systems usin computational fluid dynamics
linked to a detailed population balance model.
Computer Aided Chemical Engineering, 21(C),
551-556. <a
href="http://dx.doi.org/10.1016/S1570-7946(06)
80103-3">[More Information]</a>
Bilston, L., Fletcher, D., Stoodley, M. (2006).
Focal spinal arachnoiditis increases subarachnoid
space pressure: A computational study. Clinical
Biomechanics, 21(6), 579-584. <a
href="http://dx.doi.org/10.1016/j.clinbiomech.20
06.01.009">[More Information]</a>
Ndinisa, N., Fane, A., Wiley, D., Fletcher, D.
(2006). Fouling control in a submerged flat sheet
membrane system: Part II - Two-Phase flow
characterization and CFD simulations.
Separation Science and Technology, 41(7),
1411-1445.
Coates, M., Chan, K., Fletcher, D. (2006).
Influence of mouthpiece geometry on the
performance of a dry powder inhaler.
Respiratory Drug Delivery 2006, River Grove,
Illinois 60171, United States: Davis Healthcare
International Publishing.
Nijdam, J., Guo, B., Fletcher, D., Langrish, T.
(2006). Lagrangian and Eulerian models for
simulating turbulent dispersion and coalescence
of droplets within a spray. Applied Mathematical
Modelling, 30(11), 1196-1211. <a
href="http://dx.doi.org/10.1016/j.apm.2006.02.0
01">[More Information]</a>
Rosaguti, N., Fletcher, D., Haynes, B. (2006).
Laminar flow and heat transfer in a periodic
serpentine channel with semi-circular
cross-section. International Journal of Heat and
Mass Transfer, 49(17-18), 2912-2923. <a
href="http://dx.doi.org/10.1016/j.ijheatmasstrans
fer.2006.02.015">[More Information]</a>
Publications for David Fletcher
Geyer, P., Rosaguti, N., Fletcher, D., Haynes, B.
(2006). Laminar Flow and Heat Transfer in
Periodic Serpentine Mini-Channels. Journal of
Enhanced Heat Transfer, 13(4), 309-320.
dynamics. Chemical Engineering Science, 60(7),
2005-2015. <a
href="http://dx.doi.org/10.1016/j.ces.2004.12.01
0">[More Information]</a>
Bacchin, P., Espinasse, B., Bessiere, Y., Fletcher,
D., Aimar, P. (2006). Numerical simulation of
colloidal dispersion filtration: description of
critical flux and comparison with experimental
results. Desalination, 192(1-3), 74-81. <a
href="http://dx.doi.org/10.1016/j.desal.2005.05.0
28">[More Information]</a>
Alexiadis, A., Bao, J., Fletcher, D., Wiley, D.,
Clements, D. (2005). Analysis of the dynamic
response of a reverse osmosis membrane to
time-dependent transmembrane pressure
variation. Industrial and Engineering Chemistry
Research, 44(20), 7823-7834.
Gardner, S., Fletcher, D., Joseph, M., Dawson,
A., Harris, A. (2006). On the design of a porous
burner for the oxidation of methane in mine
ventilation air. Australian National Science
Graduate Conference, Sydney.
Doroodchi, E., Zhou, J., Fletcher, D., Galvin, K.
(2006). Particle size classification in a fluidized
bed containing parallel inclined plates. Minerals
Engineering, 19(2), 162-171.
Fletcher, D. (2006). Simulation Numerique
D'une Cuve Agitee. In Xuereb C, Poux M,
Bertrand J (Eds.), Agitation et Mélange - Aspects
fondamentaux et applications industrielles, (pp.
317-337). Paris, France: Dunod.
Geyer, P., Rosaguti, N., Fletcher, D., Haynes, B.
(2006). Thermohydraulics of square-section
microchannels following a serpentine path.
Microfluidics and Nanofluidics, 2(3), 195-204.
<a
href="http://dx.doi.org/10.1007/s10404-005-006
2-7">[More Information]</a>
Fimbres-Weihs, G., Wiley, D., Fletcher, D.
(2006). Unsteady flows with mass transfer in
narrow zigzag spacer-filled channels: A
numerical study. Industrial and Engineering
Chemistry Research, 45(19), 6594-6603.
Nijdam, J., Guo, B., Fletcher, D., Langrish, T.
(2006). Validation of the Lagrangian Approach
for Predicting Turbulent Dispersion and
Evaporation of Droplets within a Spray. Drying
Technology: an international journal, 24(11),
1373-1379.
Fletcher, D., Guo, B., Harvie, D., Langrish, T.,
Nijdam, J., Williams, J. (2006). What is
important in the simulation of spray dryer
performance and how do current CFD models
perform? Applied Mathematical Modelling,
30(11), 1281-1292. <a
href="http://dx.doi.org/10.1016/j.apm.2006.03.0
06">[More Information]</a>
2005
Elgebrandt, R., Romagnoli, J., Fletcher, D.,
Gomes, V., Gilbert, R. (2005). Analysis of
shear-induced coagulation in an emulsion
polymerisation reactor using computational fluid
Makarytchev, S., Langrish, T., Fletcher, D.
(2005). CFD analysis of scale effects in spinning
cone columns. Chemical Engineering Research
and Design, 83(8A), 951-958.
Brown, G., Fletcher, D. (2005). CFD prediction
of odour dispersion and plume visibility for
alumina refinery calciner stacks. Process Safety
and Environmental Protection, 83(3), 231-241.
Cheung, C., Barton, G., McNamara, P., Fletcher,
D. (2005). Computational Fluid Dynamics and
the MCVD Process. BGPP/ ACOFT 2005 : OSA
Topical Meeting on Bragg Gratings, Poling &
Photosensitivity (BGPP) / 30th Australian
Conference on Optical Fibre Technology
(ACOFT) 2005, Sydney: Tour Hosts Pty Ltd.
Ndinisa, N., Wiley, D., Fletcher, D. (2005).
Computational fluid dynamics simulations of
Taylor bubbles in tubular membranes - Model
validation and application to Laminar flow
systems. Chemical Engineering Research and
Design, 83(1), 40-49.
Aubin, J., Fletcher, D., Xuereb, C. (2005).
Design of micromixers using CFD modelling.
Chemical Engineering Science, 60(n 8-9 SPEC.
ISS.), 2503-2516. <a
href="http://dx.doi.org/10.1016/j.ces.2004.11.04
3">[More Information]</a>
Marklund, M., Gebart, B., Fletcher, D. (2005).
Determination of the influence of uncertain
model parameters in pressurized gasification of
black liquor using a factorial design. Combustion
Science and Technology, 177(3), 435-453.
Makarytchev, S., Langrish, T., Fletcher, D.
(2005). Exploration of spinning cone column
capacity and mass transfer performance using
CFD. Chemical Engineering Research and
Design, 83(12), 1372-1380.
Coates, M., Chan, K., Fletcher, D., Raper, J.
(2005). Influence of air flow on the performance
of a dry powder inhaler using computational and
experimental analyses. Pharmaceutical
Research, 22(9), 1445-1453. <a
href="http://dx.doi.org/10.1007/s11095-005-615
5-x">[More Information]</a>
Rosaguti, N., Fletcher, D., Haynes, B. (2005).
Laminar flow and heat transfer in a periodic
serpentine channel. Chemical Engineering and
Publications for David Fletcher
Technology, 28(3), 353-361. <a
href="http://dx.doi.org/10.1002/ceat.200407148"
>[More Information]</a>
447-456. <a
href="http://dx.doi.org/10.1016/j.expthermflusci.
2001.12.001">[More Information]</a>
Doroodchi, E., Galvin, K., Fletcher, D. (2005).
The influence of inclined plates on expansion
behaviour of solid suspensions in a liquid
fluidised bed - A computational fluid dynamics
study. Powder Technology, 160(1), 20-26.
Guo, B., Fletcher, D., Langrish, T. (2004).
Simulation Of The Agglomeration In A Spray
Using Lagrangian Particle Tracking. Applied
Mathematical Modelling, 28(3), 273-290.
Coates, M., Fletcher, D., Chan, K., Raper, J.
(2005). The role of capsule on the performance
of a dry powder inhaler using computational and
experimental analyses. Pharmaceutical
Research, 22(6), 923-932. <a
href="http://dx.doi.org/10.1007/s11095-005-458
7-y">[More Information]</a>
2004
Nijdam, J., Guo, B., Fletcher, D., Langrish, T.
(2004). Challenges Of Simulating Droplet
Coalescence Within A Spray. Drying
Technology: an international journal, 22(6),
1463-1488.
Coates, M., Fletcher, D., Chan, K., Raper, J.
(2004). Effect Of Design On The Performance
Of A Dry Powder Inhaler Using Computational
Fluid Dynamics. Part 1: Grid Structure And
Mouthpiece Length. Journal of Pharmaceutical
Sciences, 93(11), 2863-2876.
Stiles, P., Fletcher, D. (2004). Hydrodynamic
Control Of The Interface Between Two Liquids
Flowing Through A Horizontal Or Vertical
Microchannel. Lab on a Chip, 4(2), 121-124.
Doroodchi, E., Fletcher, D., Galvin, K. (2004).
Influence Of Inclined Plates On The Expansion
Behaviour Of Particulate Suspensions In A
Liquid Fluidised Bed. Chemical Engineering
Science, 59(17), 3559-3567. <a
href="http://dx.doi.org/10.1016/j.ces.2004.05.02
0">[More Information]</a>
Makarytchev, S., Langrish, T., Fletcher, D.
(2004). Mass Transfer Analysis Of Spinning
Cone Columns Using Cfd. Chemical
Engineering Research and Design, 82(A6),
752-761.
Aubin, J., Fletcher, D., Xuereb, C. (2004).
Modeling Turbulent Flow In Stirred Tanks With
Cfd: The Influence Of The Modeling Approach,
Turbulence Model And Numerical Scheme.
Experimental Thermal and Fluid Science, 28(5),
431-445. <a
href="http://dx.doi.org/10.1016/j.expthermflusci.
2003.04.001">[More Information]</a>
Aubin, J., Le Sauze, N., Bertrand, J., Fletcher,
D., Xuereb, C. (2004). Piv Measurements Of
Flow In An Aerated Tank Stirred By A DownAnd An Up-Pumping Axial Flow Impeller.
Experimental Thermal and Fluid Science, 28(5),
Langrish, T., Williams, J., Fletcher, D. (2004).
Simulation Of The Effects Of Inlet Swirl On Gas
Flow Patterns In A Pilot-Scale Spray Dryer.
Chemical Engineering Research and Design,
82(A7), 821-833.
Schwinge, J., Neal, P., Wiley, D., Fletcher, D.,
Fane, A. (2004). Spiral Wound Modules And
Spacers - Review And Analysis. Journal of
Membrane Science, 242(1-2), 129-153.
2003
Bilston, L., Fletcher, D., Brodbelt, A., Stoodley,
M. (2003). Arterial Pulsation-driven
Cerebrospinal Fluid Flow in the Perivascular
Space: A Computational Model. Computer
Methods in Biomechanics and Biomedical
Engineering, 6(4), 235-241.
Makarytchev, S., Langrish, T., Fletcher, D.
(2003). CDF Analysis of Spinning Cone
Columns: Prediction of Unsteady Gas Flow and
Pressure Drop in a Dry Column. Chemical
Engineering Journal, 87(3), 301-311.
Brown, G., Fletcher, D. (2003). CFD prediction
of odour dispersion and plume visibility for
alumina refinery calciner stacks. Computational
Fluid Dynamics In The Minerals And Process
Industries, Sydney: CSIRO.
Aubin, J., Fletcher, D., Bertrand, J., Xuereb, C.
(2003). Characterization of the Mixing Quality in
Micromixers. Chemical Engineering and
Technology, 26(12), 1262-1270. <a
href="http://dx.doi.org/10.1002/ceat.200301848"
>[More Information]</a>
Stiles, P., Fletcher, D. (2003). Effects of Gravity
on the Steady State of a Reaction in a
Liquid-State Microreactor-Deviations From
Poiseuille Flow. Physical Chemistry Chemical
Physics, 5(6), 1219-1224.
Nijdam, J., Guo, B., Fletcher, D., Langrish, T.
(2003). Lagrangian and Eulerian models for
simulating turbulent dispersion and
agglomeration of droplets within a spray.
Computational Fluid Dynamics In The Minerals
And Process Industries, Sydney: CSIRO.
Baird, J., Fletcher, D., Haynes, B. (2003). Local
Condensation Heat Transfer Rates in Fine
Passages. International Journal of Heat and
Mass Transfer, 46(23), 4453-4466.
Langrish, T., Makarytchev, S., Fletcher, D.,
Prince, R. (2003). Progress in Understanding the
Publications for David Fletcher
Physical Processes Inside Spinning Cone
Columns. Chemical Engineering Research and
Design, 81, 122-130.
Langrish, T., Fletcher, D. (2003). Prospects for
the Modelling and Design of Spray Dryers in the
21st Century. Drying Technology: an
international journal, 21(2), 197-215.
Guo, B., Fletcher, D., Rojas Marquez, G.,
Al-Abdeli, Y., Starner, S., Masri, A. (2003).
Rans calculations and measurements of
instabilities in swirl-stabilised jets and flames.
2003 Australian Symposium on Combustion &
the 8th Australian Flame Days, Melbourne:
Monash University.
Guo, B., Langrish, T., Fletcher, D. (2003).
Simulation of Gas Flow Instability in a Spray
Dryer. Chemical Engineering Research and
Design, 81(6), 631-638.
Schwinge, J., Wiley, D., Fletcher, D. (2003).
Simulation of Unsteady Flow and Vortex
Shedding for Narrow Spacer-Filled Channels.
Industrial and Engineering Chemistry Research,
42(20), 4962-4977.
Haynes, B., Fletcher, D. (2003). Subcooled Flow
Boiling Heat Transfer in Narrow Passages.
International Journal of Heat and Mass
Transfer, 46(19), 3673-3682.
Wiley, D., Fletcher, D. (2003). Techniques for
Computational Fluid Dynamics Modelling of
Flow in Membrane Channels. Journal of
Membrane Science, 211(1), 127-137.
Fletcher, D., Guo, B., Harvie, D., Langrish, T.,
Nijdam, J., Williams, J. (2003). What is
important in the simulation of spray dryer
performance and how do current CFD models
perform? Computational Fluid Dynamics In The
Minerals And Process Industries, Sydney:
CSIRO.
2002
Petrie, J., Fletcher, D., Dustan, A., Krige, A.
(2002). A CFD analysis of reactie crystallisation
in stirred tanks. World Congress on Particle
Technology 4, Sydney, Australia:
WCPT4/IEAust.
Schwinge, J., Wiley, D., Fletcher, D. (2002). A
CFD study of unsteady flow in narrow
spacer-filled channels for spiral-wound
membrane modules. Desalination, 146(1-3),
195-201.
drop in a dry column. Chemical Engineering
Journal, 87(3), 301-311.
Guo, B., Langrish, T., Fletcher, D. (2002). CFD
simulation of precession in sudden pipe
expansion flows with low inlet swirl. Applied
Mathematical Modelling, 26(1), 1-15.
Wiley, D., Fletcher, D. (2002). Computational
fluid fynamics modelling of flow and permeation
for pressure-driven membrane processes.
Desalination, 145, 183-186.
Rosaguti, N., Fletcher, D., Al-Abdeli, Y., Masri,
A. (2002). Computations and measurements of
turbulent non-reacting swirling jets. 2002
Australian Symposium on Combustion and 7th
Australian Flame Days, Adelaide: Australian
Flame Research Committee Inc.
Guo, B., Fletcher, D., Langrish, T. (2002). Flow
patterns in sudden expansions and their relevance
to understanding the behaviour of spray dryers.
Developments in Chemical Engineering and
Mineral Processing, 10(3-4), 305-322.
Langrish, T., Fletcher, D. (2002). Simulation of
the agglomeration in a spray using lagrangian
particle tracking. WCPT4, Sydney, Australia:
WCPT4 Inc.
Schwinge, J., Wiley, D., Fletcher, D. (2002).
Simulation of the flow around spacer filaments
between channel walls. 2. mass -transfer
enhancement. Industrial and Engineering
Chemistry Research, 41(19), 4879-4888.
Schwinge, J., Wiley, D., Fletcher, D. (2002).
Simulation of the flow around spacer filaments
between narrow channel walls. 1.
Hydrodynamics. Industrial and Engineering
Chemistry Research, 41(12), 2977-2987.
Moghtaderi, B., Novozhilov, V., Fletcher, D.,
Kent, J. (2002). The effect of char ozidation on
the flaming combustion characteristics of wood
materials. In Paul R DeCicco (Eds.), The
Behaviour Of Glass And Other Materials
Exposed To Fire, (pp. 165-176). United States:
BMJ Publishing Group.
Stiles, P., Fletcher, D. (2002). The effect of
gravity on the rate of a simple neutralisation
reaction in a small, open cylindrical vessell.
Physical Chemistry Chemical Physics, 4(9),
1587-1591.
2001
Harvie, D., Langrish, T., Fletcher, D. (2002). A
computational fluid dynamics study of a
tall-form spray dryer. Food and Bioproducts
Processing, 80(3), 163-175.
Harvie, D., Fletcher, D. (2001). A hydrodynamic
and thermodynamic simulation of droplet
impacts on hot surfaces, part I: Theoretical
model. International Journal of Heat and Mass
Transfer, 44(14), 2633-2642.
Makarytchev, S., Langrish, T., Fletcher, D.
(2002). CDF analysis of spinning cone columns:
perdiction of unsteady gas flow and pressure
Harvie, D., Fletcher, D. (2001). A hydrodynamic
and thermodynamic simulation of droplet
impacts on hot surfaces, Part II: validation and
Publications for David Fletcher
applications. International Journal of Heat and
Mass Transfer, 44, 2643-2659.
Fletcher, D., Harvie, D. (2001). A new volume of
fluid advection algorithm: the defined donating
region scheme. International Journal for
Numerical Methods in Fluids, 35, 151-172.
Harvie, D., Fletcher, D. (2001). A Simple
Kinetic Theory Treatment of Volatile Liquid-Gas
Interfaces. Journal of Heat Transfer, 123,
486-491.
Langrish, T., Fletcher, D., Guo, B. (2001). An
assessment of turbulence models applied to the
simulation of a two-dimensional submerged jet.
Applied Mathematical Modelling, 25, 635-653.
Langrish, T., Fletcher, D., Guo, B. (2001). Effect
of a Downstream Sudden Contraction on Flow
Instability Behind a Sudden Pipe Expansion.
14th Australasian Fluid Mechanics Conference.
UNSW Australian Defence Force Academy.
Fletcher, D., Aubin, J., Mavros, P., Bertrand, J.,
Xuereb, C. (2001). Effect of Axial Agitator
Configuration (up-pumping, down-pumping,
reverse rotation) on Flow Patterns generated in
stirred vessels. Chemical Engineering Research
and Design, 79, 845-856.
Kockel, T., Fletcher, D., Langrish, T., Lebarbier,
C. (2001). Experimental Measurement and
numerical simulation of the effect of swirl on
flow stability in spray dryers. Chemical
Engineering Research and Design, 79 Part A,
260-268.
Fletcher, D., Haynes, B., Chen, J., Duffy, B.,
Nelson, P. (2001). FTIR spectroscopy
measurments and CFD simulations of the
pollutants arising from unflued combustion in a
room. Building and Environment, 36, 597-603.
Langrish, T., Fletcher, D., Guo, B. (2001).
Numerical Simulation of Unsteady Turbulent
Flow in Axisymmetric Sudden Expansions.
Journal of Fluids Engineering, 123, 574-587.
Fletcher, D., Harvie, D., Langrish, T. (2001).
Numerical Simulations of Gas Flow Patterns
within a tall-form spray dryer. Chemical
Engineering Research and Design, 79 Part A,
235-248.
Fletcher, D., Motteram, N., Wood, G., Kwok, K.
(2001). Physical and numerical modelling of
thunderstorm downbursts. Journal of Wind
Engineering and Industrial Aerodynamics, 89,
535-552.
Langrish, T., Fletcher, D. (2001). Prospects for
the Modelling and Design of Spray Dryers in the
21st Century. 6th World Congress of Chemical
Engineering. UNSW Australian Defence Force
Academy.
Langrish, T., Fletcher, D., Guo, B. (2001).
Simulation of Turbulent Swirl Flow in an
Axisymmetric Sudden Expansion. AIAA Journal,
39 No 1, 96-102.
Langrish, T., Fletcher, D. (2001). Spray Drying
of food ingredients and applications of CFD in
spray drying. Chemical Engineering and
Processing, 40, 345-354.
Fletcher, D., Stiles, P. (2001). The effect of
gravity on the rate of a simple liquid-state
reaction in a small, unstirred cylindrical vessel.
Physical Chemistry Chemical Physics, 3,
1617-1621.
Fletcher, D., Holm-Christensen, O., Jones, I.,
Wilkes, N., Splawski, B., Stopford, P., Creemers,
B., Pulles, C. (2001). The solution of coupled
flow and chemistry problems. Progress in
Computational Fluid Dynamics, 1, 43-49.
Fletcher, D., Sowana, D., Williams, D., Dunlop,
E., Dally, B., O'Neill, B. (2001). Turbulent Shear
Stress Effects on Plant Cell suspension cultures.
Chemical Engineering Research and Design, 79,
867-875.
Langrish, T., Fletcher, D., Southwell, D. (2001).
Use of Computational Fluid Dynamics
Techniques to assess design alternatives for the
plenum chamber of a small spray dryer. Drying
Technology: an international journal, 19 (2),
257-268.