Publications for Liyong Tong
2016
Science and Manufacturing, 84, 196-208. <a
href="http://dx.doi.org/10.1016/j.compositesa.20
16.01.011">[More Information]</a>
Wang, J., Tong, L., Karihaloo, B. (2016). A
bridging law and its application to the analysis of
toughness of carbon nanotube-reinforced
composites and pull-out of fibres grafted with
nanotubes. Archive of Applied Mechanics,
86(1-2), 361-373. <a
href="http://dx.doi.org/10.1007/s00419-015-110
0-x">[More Information]</a>
He, R., Zheng, S., Tong, L. (2016). Multimodal
Vibration Control of Photo-Electric Laminated
Thin Cylindrical Shells Via Self-Organizing
Fuzzy Sliding Mode Control. Journal of
Vibration and Acoustics-Transactions of the
ASME, 138(4), 1-9. <a
href="http://dx.doi.org/10.1115/1.4033195">[Mo
re Information]</a>
Luo, Q., Tong, L. (2016). An algorithm for
eradicating the effects of void elements on
structural topology optimization for nonlinear
compliance. Structural and Multidisciplinary
Optimization, 53(4), 695-714. <a
href="http://dx.doi.org/10.1007/s00158-015-132
5-x">[More Information]</a>
Luo, Q., Tong, L. (2016). Solutions for clamped
adhesively bonded single lap joint with
movement of support end and its application to a
carbon nanotube junction in tension. Journal of
Adhesion, 92(5), 349-379. <a
href="http://dx.doi.org/10.1080/00218464.2015.
1035781">[More Information]</a>
Wang, Y., Tong, L. (2016). Closed-form
Formulas for Adhesion Energy of Blister Tests
under Pressure and Point Load. Journal of
Adhesion, 92(3), 171-193. <a
href="http://dx.doi.org/10.1080/00218464.2015.
1008630">[More Information]</a>
Li, C., Tong, L. (2016). Topology optimization
of incompressible materials based on the mixed
SBFEM. Computers and Structures, 165, 24-33.
<a
href="http://dx.doi.org/10.1016/j.compstruc.2015
.12.003">[More Information]</a>
Chen, W., Liu, S., Tong, L., Li, S. (2016).
Design of multi-layered porous fibrous metals
for optimal sound absorption in the low
frequency range. Theoretical and Applied
Mechanics Letters, 6(1), 42-48. <a
href="http://dx.doi.org/10.1016/j.taml.2015.12.0
02">[More Information]</a>
2015
Publications for Liyong Tong
Islam, M., Tong, L. (2016). Effects of
hygrothermal and ambient humidity conditioning
on shear strength of metal-GFRP single lap joints
co-cured in and out of water. International
Journal of Adhesion and Adhesives, 68, 305-316.
<a
href="http://dx.doi.org/10.1016/j.ijadhadh.2016.
04.008">[More Information]</a>
Guo, J., Wang, Z., Tong, L., Liang, W. (2016).
Effects of short carbon fibres and nanoparticles
on mechanical, thermal and shape memory
properties of SMP hybrid nanocomposites.
Composites Part B: Engineering, 90, 152-159.
<a
href="http://dx.doi.org/10.1016/j.compositesb.20
15.12.010">[More Information]</a>
Islam, M., Deng, Y., Tong, L., Faisal, S., Roy,
A., Minett, A., Gomes, V. (2016). Grafting
carbon nanotubes directly onto carbon fibers for
superior mechanical stability: Towards next
generation aerospace composites and energy
storage applications. Carbon, 96, 701-710. <a
href="http://dx.doi.org/10.1016/j.carbon.2015.10
.002">[More Information]</a>
Islam, M., Tong, L. (2016). Influence of pinning
on static strength of co-cured metal-GFRP hybrid
single lap joints. Composites Part A: Applied
Li, C., Tong, L. (2015). 2D fracture analysis of
magnetoelectroelastic composites by the
SBFEM. Composite Structures, 132(2015),
984-994. <a
href="http://dx.doi.org/10.1016/j.compstruct.201
5.07.015">[More Information]</a>
Li, C., Tong, L. (2015). A mixed SBFEM for
stress singularities in nearly incompressible
multi-materials. Computers and Structures,
157(2015), 19-30. <a
href="http://dx.doi.org/10.1016/j.compstruc.2015
.05.011">[More Information]</a>
Liu, S., Li, Q., Chen, W., Tong, L., Cheng, G.
(2015). An identification method for enclosed
voids restriction in manufacturability design for
additive manufacturing structures. Frontiers of
Mechanical Engineering, 10(2), 126-137. <a
href="http://dx.doi.org/10.1007/s11465-015-034
0-3">[More Information]</a>
Luo, Q., Tong, L. (2015). Design and testing for
shape control of piezoelectric structures using
topology optimization. Engineering Structures,
97, 90-104. <a
href="http://dx.doi.org/10.1016/j.engstruct.2015.
04.006">[More Information]</a>
Lei, H., Tong, L., Wang, Z. (2015). Effect of
temperature on magnetic field-induced response
of Ni-Mn-Ga single crystals. Journal of
Intelligent Material Systems and Structures,
26(17), 2395-2410. <a
href="http://dx.doi.org/10.1177/1045389X14556
164">[More Information]</a>
Publications for Liyong Tong
Islam, M., Tong, L. (2015). Effects of initial
blister radius and shaft diameter on energy
release rate of metal-polymer composite coating.
International Journal of Adhesion and
Adhesives, 62, 107-123. <a
href="http://dx.doi.org/10.1016/j.ijadhadh.2015.
07.007">[More Information]</a>
Zheng, S., Tong, L., Luo, Q. (2015). Finite
element formulations and algorithms for coupled
multiphysics analysis of 0-1 and 0-3 polarized
PLZT actuators. International Journal of Applied
Electromagnetics and Mechanics, 49(4),
513-530. <a
href="http://dx.doi.org/10.3233/JAE-150058">[
More Information]</a>
Liu, S., Li, Q., Chen, W., Hu, R., Tong, L.
(2015). H-DGTP-a Heaviside-function based
directional growth topology parameterization for
design optimization of stiffener layout and height
of thin-walled structures. Structural and
Multidisciplinary Optimization, 52(5), 903-913.
<a
href="http://dx.doi.org/10.1007/s00158-015-128
1-5">[More Information]</a>
Luo, Q., Tong, L. (2015). Optimal Designs for
Vibrating Structures Using a Moving Isosurface
Threshold Method With Experimental Study.
Journal of Vibration and Acoustics-Transactions
of the ASME, 137(6), 1-13. <a
href="http://dx.doi.org/10.1115/1.4030771">[Mo
re Information]</a>
Guo, J., Wang, Z., Tong, L., Lv, H., Liang, W.
(2015). Shape memory and thermo-mechanical
properties of shape memory polymer/carbon
fiber composites. Composites Part A: Applied
Science and Manufacturing, 76, 162-171. <a
href="http://dx.doi.org/10.106/j.compositesa.201
5.05.026">[More Information]</a>
Luo, Q., Tong, L. (2015). Structural topology
optimization for maximum linear buckling loads
by using a moving iso-surface threshold method.
Structural and Multidisciplinary Optimization,
52(1), 71-90. <a
href="http://dx.doi.org/10.1007/s00158-015-128
6-0">[More Information]</a>
Wang, C., He, X., Tong, L., Luo, Q., Li, Y.,
Song, Q., Lv, X., Shang, Y., Peng, Q., Li, J.
(2015). Tensile failure mechanisms of individual
junctions assembled by two carbon nanotubes.
Composites Science and Technology, 110,
159-165. <a
href="http://dx.doi.org/10.1016/j.compscitech.20
15.02.003">[More Information]</a>
Alfouneh, M., Tong, L. (2015). Topological
design of stiffener for static bending of stiffened
and sandwiched plates. The 2nd Australasian
Conference on Computational Mechanics
(ACCM 2015), Switzerland: Scientific.Net.
2014
Islam, M., Tong, L., Falzon, P. (2014). Influence
of metal surface preparation on its surface
profile, contact angle, surface energy and
adhesion with glass fibre prepreg. International
Journal of Adhesion and Adhesives, 51, 32-41.
<a
href="http://dx.doi.org/10.1016/j.ijadhadh.2014.
02.006">[More Information]</a>
Lei, H., Tong, L., Wang, Z. (2014). Macroscopic
response of Ni-Mn-Ga single crystals
considering the effects of residual reorientation
strain and temperature. Journal of Intelligent
Material Systems and Structures, 25(13),
1566-1584. <a
href="http://dx.doi.org/10.1177/1045389X13508
331">[More Information]</a>
Wang, C., Peng, Q., Wu, J., He, X., Tong, L.,
Luo, Q., Li, J., Moody, S., Liu, H., Wang, R., et
al (2014). Mechanical characteristics of
individual multi-layer graphene-oxide sheets
under direct tensile loading. Carbon, 80(1),
279-289. <a
href="http://dx.doi.org/10.1016/j.carbon.2014.08
.066">[More Information]</a>
Yang, L., Tong, L., He, X., Wagner, H., Wang,
R. (2014). Molecular dynamic simulation of
oblique pullout of carbon nanotube from resin.
Computational Materials Science, 83, 504-512.
<a
href="http://dx.doi.org/10.1016/j.commatsci.201
3.11.006">[More Information]</a>
Tong, L., Luo, Q. (2014). Selection of integral
functions for normal mode analysis in topology
optimization. Applied Mechanics and Materials,
553(2014), 795-800. <a
href="http://dx.doi.org/10.4028/www.scientific.n
et/AMM.553.795">[More Information]</a>
Wood, M., Sun, X., Tong, L., Katzos, A.,
Rispler, A. (2014). The effect of stitch
distribution and stitch pattern on mode I
delamination toughness of stitched laminated
composites. In L Ye, Y.-W. Mai, & Z. Su
(Eds.), Composites Technologies For 2020, (pp.
243-248). U.K.: Woodhead Publishing Limited.
Wang, C., Li, Y., Tong, L., Song, Q., Li, K., Li,
J., Peng, Q., He, X., Wang, R., Jiao, W., et al
(2014). The role of grafting force and surface
wettability in interfacial enhancement of carbon
nanotube/carbon fiber hierarchical composites.
Carbon, 69, 239-246. <a
href="http://dx.doi.org/10.1016/j.carbon.2013.12
.020">[More Information]</a>
Vasista, S., Tong, L. (2014). Topology
Optimisation of 3D Structures using the Moving
Iso-Surface Threshold Method. Applied
Mechanics and Materials, 553(2014), 801-806.
Publications for Liyong Tong
<a
href="http://dx.doi.org/10.4028/www.scientific.n
et/AMM.553.801">[More Information]</a>
<a
href="http://dx.doi.org/10.2514/1.J052239">[Mo
re Information]</a>
Vasista, S., Tong, L. (2014). Topology
optimisation via the moving iso-surface
threshold method: implementation and
application. Aeronautical Journal, 118(1201),
315-342.
2012
2013
Luo, Q., Tong, L. (2013). Adaptive
pressure-controlled cellular structures for shape
morphing I: design and analysis. Smart Materials
and Structures, 22(5), 1-16. <a
href="http://dx.doi.org/10.1088/0964-1726/22/5/
055014">[More Information]</a>
Luo, Q., Tong, L. (2013). Adaptive
pressure-controlled cellular structures for shape
morphing: II. Numerical and experimental
validation. Smart Materials and Structures, 22,
1-12. <a
href="http://dx.doi.org/10.1088/0964-1726/22/5/
055015">[More Information]</a>
Lei, H., Wang, Z., Tong, L., Zhou, B., Fu, J.
(2013). Experimental and numerical
investigation on the macroscopic mechanical
behavior of shape memory alloy hybrid
composite with weak interface. Composite
Structures, 101, 301-312. <a
href="http://dx.doi.org/10.1016/j.compstruct.201
3.02.006">[More Information]</a>
Lei, H., Wang, Z., Tong, L., Tang, X. (2013).
Macroscopic Mechanical Characterization of
SMAs Fiber-Reinforced Hybrid Composite
Under Uniaxial Loading. Journal of Materials
Engineering and Performance, 22(10),
3055-3062. <a
href="http://dx.doi.org/10.1007/s11665-013-058
4-1">[More Information]</a>
Islam, M., Tong, L., Falzon, P. (2013). Metal
surface profile and residual stress: Persuasion of
adhesion. 22nd Australasian Conference on the
Mechanics of Structures and Materials, Leiden:
CRC Press/Balkema. <a
href="http://dx.doi.org/10.1201/b15320-118">[
More Information]</a>
Wang, C., He, X., Tong, L., Peng, Q., Wang, R.,
Li, Y., Li, Y. (2013). Theoretical prediction and
experimental verification of pulling carbon
nanotubes from carbon fiber prepared by
chemical grafting method. Composites Part A:
Applied Science and Manufacturing, 50, 1-10. <a
href="http://dx.doi.org/10.1016/j.compositesa.20
13.03.008">[More Information]</a>
Vasista, S., Tong, L. (2013). Topology
Optimized Design and Testing of a
Pressure-Driven Morphing Aerofoil Trailing
Edge Structure. AIAA Journal, 51(8), 1898-1907.
He, X., Wang, C., Tong, L., Li, Y., Peng, Q.,
Mei, L., Wang, R. (2012). A pullout model for
inclined carbon nanotube. Mechanics of
Materials, 52, 28-39. <a
href="http://dx.doi.org/10.1016/j.mechmat.2012.
04.004">[More Information]</a>
Luo, Q., Tong, L. (2012). Analytic formulas of
energy release rates for delamination using a
global-local method. International Journal of
Solids and Structures, 49(23-24), 3335-3344. <a
href="http://dx.doi.org/10.1016/j.ijsolstr.2012.07
.005">[More Information]</a>
Vasista, S., Tong, L. (2012). Design and Testing
of Pressurized Cellular Planar Morphing
Structures. AIAA Journal, 50(6), 1328-1338. <a
href="http://dx.doi.org/10.2514/1.J051427">[Mo
re Information]</a>
Vasista, S., Tong, L. (2012). Design
Considerations of a Pressure Driven Morphing
Wing Structure. 28th Congress of the
International Council of the Aeronautical
Sciences (ICAS 2012), UK: Optimage Ltd.
He, X., Wang, C., Tong, L., Wang, R., Cao, A.,
Peng, Q., Moody, S., Li, Y. (2012). Direct
measurement of grafting strength between an
individual carbon nanotube and a carbon fiber.
Carbon, 50(10), 3782-3788. <a
href="http://dx.doi.org/10.1016/j.carbon.2012.03
.053">[More Information]</a>
Yang, L., He, X., Mei, L., Tong, L., Wang, R.,
Li, Y. (2012). Interfacial shear behavior of 3D
composites reinforced with CNT-grafted carbon
fibers. Composites Part A: Applied Science and
Manufacturing, 43(8), 1410-1418. <a
href="http://dx.doi.org/10.1016/j.compositesa.20
11.11.012">[More Information]</a>
Luo, Q., Tong, L. (2012). Laminated plate
formulation for photostrictive actuators and
sensors. Journal of Composite Materials, 46(5),
557-573. <a
href="http://dx.doi.org/10.1177/0021998311414
068">[More Information]</a>
Yang, L., Tong, L., He, X. (2012). MD
simulation of carbon nanotube pullout behavior
and its use in determining mode I delamination
toughness. Computational Materials Science,
55(2), 356-364. <a
href="http://dx.doi.org/10.1016/j.commatsci.201
1.12.014">[More Information]</a>
Luo, Q., Tong, L. (2012). Multifunctional
behaviors of an indium tin
oxide/PbLa(ZrTi)O3/indium tin oxide wafer
Publications for Liyong Tong
illuminated by ultraviolet light. Journal of
Intelligent Material Systems and Structures,
23(7), 765-774. <a
href="http://dx.doi.org/10.1177/1045389X12440
847">[More Information]</a>
Vasista, S., Tong, L. (2012). Pressurized
Morphing Wing Structures. 53rd AIAA
Structural Dynamics, and Materials Conference,
United States: American Institute of Aeronautics
and Astronautics (AIAA).
Vasista, S., Tong, L., Wong, K. (2012).
Realization of morphing wings: A
multidisciplinary challenge. Journal of Aircraft:
devoted to aeronautical science and technology,
49(1), 11-28. <a
href="http://dx.doi.org/10.2514/1.C031060">[M
ore Information]</a>
Lei, H., Wang, Z., Zhou, B., Tong, L., Wang, X.
(2012). Simulation and analysis of shape
memory alloy fiber reinforced composite based
on cohesive zone model. Materials and Design,
40(September 2012), 138-147. <a
href="http://dx.doi.org/10.1016/j.matdes.2012.03
.037">[More Information]</a>
Vasista, S., Tong, L. (2012). Stiffness, Stress and
Morphing Design of Wing Structures via
Structural Topology Optimisation. 3RD
AIRCRAFT STRUCTURAL DESIGN
Conference, United Kingdom: Royal
Aeronautical Society.
Brown, S., Tong, L. (2012). Validation and
enhancements for the localised
experimental-numerical technique. Composites
Part B: Engineering, 43(5), 2359-2374. <a
href="http://dx.doi.org/10.1016/j.compositesb.20
11.11.069">[More Information]</a>
2011
Luo, Q., Tong, L. (2011). 3D Model of Coupled
Multi-physics Fields for PLZT Ceramics and Its
Applications to Photostrictive Plates. Journal of
Intelligent Material Systems and Structures,
22(1), 17-30. <a
href="http://dx.doi.org/10.1177/1045389X10392
615">[More Information]</a>
Brown, S., Tong, L. (2011). A localised
experimental-numerical technique for
determining mixed mode strain energy release
rates. Composite Structures, 94(1), 132-142. <a
href="http://dx.doi.org/10.1016/j.compstruct.201
1.07.009">[More Information]</a>
Luo, Q., Luo, Z., Tong, L. (2011). A variational
principle and finite element formulation for
multi-physics PLZT ceramics. Mechanics
Research Communications, 38(3), 198-202. <a
href="http://dx.doi.org/10.1016/j.mechrescom.20
11.02.011">[More Information]</a>
Plain, K., Tong, L. (2011). An experimental
study on mode I and II fracture toughness of
laminates stitched with a one-sided stitching
technique. Composites Part A: Applied Science
and Manufacturing, 42(2), 203-210. <a
href="http://dx.doi.org/10.1016/j.compositesa.20
10.11.006">[More Information]</a>
Tong, L., Luo, Q. (2011). Analytical Approach
to Joint Design. In Silva, Lucas F. M. da;
Ochsner, Andreas; Adams, Robert D (Eds.),
Handbook of Adhesion Technology, (pp.
597-627). Germany: Springer.
Kang, Z., Wang, R., Tong, L. (2011). Combined
optimization of bi-material structural layout and
voltage distribution for in-plane piezoelectric
actuation. Computer Methods in Applied
Mechanics and Engineering, 200(13-16),
1467-1478. <a
href="http://dx.doi.org/10.1016/j.cma.2011.01.00
5">[More Information]</a>
Brown, S., Tong, L., Luo, Q., Gong, X. (2011).
Mixed mode energy release rates for bonded
composite joints. In Pedro Camanho and
Liyong Tong (Eds.), Composite joints and
connections: Principles, modelling and testing,
(pp. 435-462). Cambridge, UK: Woodhead
Publishing Ltd.
Yang, L., Tong, L., He, X. (2011). Molecular
Dynamic Simulation of Sword-Sheath Extraction
Behavior in CNT Reinforced Composite.
Polymers and Polymer Composites, 19(2-3),
113-118.
Luo, Z., Luo, Q., Tong, L., Gao, W., Song, C.
(2011). Shape morphing of laminated composite
structures with photostrictive actuators via
topology optimization. Composite Structures,
93(2), 406-418. <a
href="http://dx.doi.org/10.1016/j.compstruct.201
0.09.001">[More Information]</a>
Tong, L., Lin, J. (2011). Structural topology
optimization with implicit design
variable-optimality and algorithm. Finite
Elements in Analysis and Design, 47(8),
922-932. <a
href="http://dx.doi.org/10.1016/j.finel.2011.03.0
04">[More Information]</a>
Gu, Y., Tong, L., Tan, P. (2011). Surface strain
distribution method for delamination detection
using piezoelectric actuators and sensors.
Journal of Physics: Conference Series, 305(1,
Article number 012077), 012077-1-012077-10.
<a
href="http://dx.doi.org/10.1088/1742-6596/305/1
/012077">[More Information]</a>
Luo, Q., Tong, L. (2011).
Ultraviolet-light-induced multi-physics behaviors
of 0-3 polarized transparent PLZT plates: I.
Publications for Liyong Tong
Experimental testing. Smart Materials and
Structures, 20, 115004-1-115004-12. <a
href="http://dx.doi.org/10.1088/0964-1726/20/11
/115004">[More Information]</a>
Luo, Q., Tong, L. (2011).
Ultraviolet-light-induced multi-physics behaviors
of 0-3 polarized transparent PLZT plates: II.
Finite element analysis and validation. Smart
Materials and Structures, 20(11),
115005-1-115005-12. <a
href="http://dx.doi.org/10.1088/0964-1726/20/11
/115005">[More Information]</a>
2010
Lin, J., Luo, Z., Tong, L. (2010). A new
multi-objective programming scheme for
topology optimization of compliant mechanisms.
Structural and Multidisciplinary Optimization,
40(1-6), 241-255. <a
href="http://dx.doi.org/10.1007/s00158-008-035
5-z">[More Information]</a>
Lin, J., Luo, Z., Tong, L. (2010). Design of
Adaptive Cores of Sandwich Structures Using a
Compliant Unit Cell Approach and Topology
Optimization. Journal of Mechanical Design,
132(8), 081012-1-081012-8. <a
href="http://dx.doi.org/10.1115/1.4002201">[Mo
re Information]</a>
Luo, Q., Tong, L. (2010). Multi-physics field
models of photostrictive unimorphs and
heterogeneous bimorphs subjected to light
illumination and mechanical loading.
International Journal of Solids and Structures,
47(16), 2006-2016. <a
href="http://dx.doi.org/10.1016/j.ijsolstr.2010.03
.031">[More Information]</a>
Kiang, J., Tong, L. (2010). Nonlinear
magneto-mechanical finite element analysis of
Ni-Mn-Ga single crystals. Smart Materials and
Structures, 19(1), 1-17. <a
href="http://dx.doi.org/10.1088/0964-1726/19/1/
015017">[More Information]</a>
Plain, K., Tong, L. (2010). The effect of stitch
incline angle on mode I fracture toughness Experimental and modelling. Composite
Structures, 92(7), 1620-1630. <a
href="http://dx.doi.org/10.1016/j.compstruct.200
9.11.027">[More Information]</a>
2009
Luo, Z., Tong, L., Kang, Z. (2009). A level set
method for structural shape and topology
optimization using radial basis functions.
Computers and Structures, 87(7-8), 425-434. <a
href="http://dx.doi.org/10.1016/j.compstruc.2009
.01.008">[More Information]</a>
Lin, J., Luo, Z., Tong, L. (2009). An
Evolutionary Method of Dynamic Level Sets for
Shape and Topology Optimization Using X-Fem.
International Conference on Extended Finite
Element Methods XFEM 2009 - Recent
Developments and Applications, Germany:
RWTH Aachen University.
Luo, Q., Tong, L. (2009). Analytical solutions
for nonlinear analysis of composite single-lap
adhesive joints. International Journal of
Adhesion and Adhesives, 29, 144-154. <a
href="http://dx.doi.org/10.1016/j.ijadhadh.2008.
01.007">[More Information]</a>
Luo, Q., Tong, L. (2009). Calculation of Energy
Release Rates for Cohesive and Interlaminar
Delamination Based on the Classical
Beam-adhesive Model. Journal of Composite
Materials, 43(4), 1-348. <a
href="http://dx.doi.org/10.1177/0021998308099
226">[More Information]</a>
Luo, Q., Tong, L. (2009). Constitutive equations
for 0-3 polarized PLZT actuators. International
Journal of Solids and Structures, 46(25-26),
4313-4321. <a
href="http://dx.doi.org/10.1016/j.ijsolstr.2009.08
.014">[More Information]</a>
Luo, Q., Tong, L. (2009). Constitutive Modeling
of Photostrictive Materials and Design
Optimization of Microcantilevers. Journal of
Intelligent Material Systems and Structures,
20(12), 1425-1437. <a
href="http://dx.doi.org/10.1177/1045389X09103
224">[More Information]</a>
Nguyen, V., Tong, L. (2009). Coupled
algorithms for piezoelectric actuator design
optimization for shape control of smart
structures. International Journal of
Computational Methods, 6(4), 501-519. <a
href="http://dx.doi.org/10.1142/S021987620900
1978">[More Information]</a>
Luo, Z., Tong, L., Luo, J., Wei, P., Wang, M.
(2009). Design of piezoelectric actuators using a
multiphase level set method of piecewise
constants. Journal of Computational Physics,
228(7), 2643-2659. <a
href="http://dx.doi.org/10.1016/j.jcp.2008.12.01
9">[More Information]</a>
Luo, Q., Tong, L. (2009). Energy release rates
for interlaminar delamination in laminates
considering transverse shear effects. Composite
Structures, 89(2), 235-244. <a
href="http://dx.doi.org/10.1016/j.compstruct.200
8.07.015">[More Information]</a>
Wood, M., Tong, L., Luo, Q., Sun, X., Katzos,
A., Rispler, A. (2009). Failure of Stitched
Composite L-Joints Under Tensile Loading Experiment and Simulation. Journal of
Reinforced Plastics and Composites, 28(6),
715-742. <a
Publications for Liyong Tong
href="http://dx.doi.org/10.1177/0731684407086
969">[More Information]</a>
Luo, Q., Tong, L. (2009). Fracture Prediction of
Adhesively Bonded Structures Using Energy
Release Rates. Journal of Adhesion Science and
Technology, 23, 1415-1440. <a
href="http://dx.doi.org/10.1163/156856109X433
009">[More Information]</a>
Luo, Z., Tong, L., Ma, H. (2009). Shape and
topology optimization for
electrothermomechanical microactuators using
level set methods. Journal of Computational
Physics, 228(9), 3173-3181. <a
href="http://dx.doi.org/10.1016/j.jcp.2009.01.01
0">[More Information]</a>
Plain, K., Tong, L. (2009). Traction law for
inclined through-thickness reinforcement using a
geometrical approach. Composite Structures,
88(4), 558-569. <a
href="http://dx.doi.org/10.1016/j.compstruct.200
8.06.002">[More Information]</a>
Luo, Q., Tong, L. (2009). Use of optically
transparent lead lanthanum zirconate titanate as
actuators and sensors. 2nd International
Conference on Smart Materials and
Nanotechnology in Engineering SMN 2009,
United States: SPIE - International Society for
Optical Engineering.
2008
Luo, Z., Tong, L. (2008). A level set method for
shape and topology optimization of
large-displacement compliant mechanisms.
International Journal for Numerical Methods in
Engineering, 76(6), 862-892. <a
href="http://dx.doi.org/10.1002/nme.2352">[Mo
re Information]</a>
Luo, J., Luo, Z., Chen, S., Tong, L., Wang, M.
(2008). A new level set method for systematic
design of hinge-free compliant mechanisms.
Computer Methods in Applied Mechanics and
Engineering, 198(2), 318-331. <a
href="http://dx.doi.org/10.1016/j.cma.2008.08.00
3">[More Information]</a>
Luo, J., Luo, Z., Chen, L., Tong, L., Wang, M.
(2008). A semi-implicit level set method for
structural shape and topology optimization.
Journal of Computational Physics, 227(11),
5561-5581. <a
href="http://dx.doi.org/10.1016/j.jcp.2008.02.00
3">[More Information]</a>
Tong, L., Luo, Q. (2008). Analysis of cracked
lap shear (CLS) joints. In Martins da Silva,
Lucas Filipe; Ochsner, Andreas (Eds.), Modeling
of Adhesively Bonded Joints, (pp. 22-51).
Heidelberg: Springer.
Luo, Q., Tong, L. (2008). Analytical solutions
for adhesive composite joints considering large
deflection and transverse shear deformation in
adherends. International Journal of Solids and
Structures, 45(22-23), 5914-5935. <a
href="http://dx.doi.org/10.1016/j.ijsolstr.2008.07
.001">[More Information]</a>
Luo, Z., Tong, L., Wang, M. (2008). Design of
distributed compliant micromechanisms with an
implicit free boundary representation. Structural
and Multidisciplinary Optimization, 36(6),
607-621. <a
href="http://dx.doi.org/10.1007/s00158-007-019
8-z">[More Information]</a>
Tong, L., Sun, X., Tan, P. (2008). Effect of Long
Multi-walled Carbon Nanotubes on
Delamination Toughness of Laminated
Composites. Journal of Composite Materials,
42(1), 5-23. <a
href="http://dx.doi.org/10.1177/0021998307086
186">[More Information]</a>
Tan, P., Tong, L., Sun, X. (2008). Effective
properties for plain weave composites
through-thickness reinforced with carbon
nanotube forests. Composite Structures, 84(1),
1-10. <a
href="http://dx.doi.org/10.1016/j.compstruct.200
7.05.008">[More Information]</a>
Tan, P., Tong, L. (2008). Integrated and
discontinuous piezoelectric sensor/actuator for
delamination detection. In Srinivasan Sridharan
(Eds.), Delamination behaviour of composites,
(pp. 141-168). Cambridge, UK: Woodhead
Publishing Ltd.
Kang, Z., Tong, L. (2008). Integrated
Optimization of Material Layout and Control
Voltage for Piezoelectric Laminated Plates.
Journal of Intelligent Material Systems and
Structures, 19, 889-904. <a
href="http://dx.doi.org/10.1177/1045389X07084
527">[More Information]</a>
Luo, Q., Tong, L. (2008). Moving least square
approximation for tracking dynamic shapes of
smart structures. 7th European Conference on
Structural Dynamics, UK: University of
Southampton.
Chen, J., Tong, L., Wei, J., Sun, D. (2008).
Numerical investigation on multiphase coupling
heat conduction with subcooling boiling
boundary conditions and effect of shape during
quenching process. Journal of Materials
Processing Technology, 203, 86-94. <a
href="http://dx.doi.org/10.1016/j.jmatprotec.200
7.09.042">[More Information]</a>
Liu, S., Tong, L., Lin, Z. (2008). Simultaneous
optimization of control parameters and
configurations of PZT actuators for morphing
structural shapes. Finite Elements in Analysis
Publications for Liyong Tong
and Design, 44, 417-424. <a
href="http://dx.doi.org/10.1016/j.finel.2008.01.0
08">[More Information]</a>
Sun, D., Tong, L. (2008). Theoretical
investigation on wireless vibration control of thin
beams using photostrictive actuators. Journal of
Sound and Vibration, 312, 182-194. <a
href="http://dx.doi.org/10.1016/j.jsv.2007.10.049
">[More Information]</a>
Kang, Z., Tong, L. (2008). Topology
optimization-based distribution design of
actuation voltage in static shape control of plates.
Computers and Structures, 86(19-20),
1885-1893. <a
href="http://dx.doi.org/10.1016/j.compstruc.2008
.03.002">[More Information]</a>
8">[More Information]</a>
Tan, P., Tong, L. (2007). Experimental and
analytical identification of a delamination using
isolated PZT sensor and actuator patches.
Journal of Composite Materials, 41(4), 477-492.
Luo, Q., Tong, L. (2007). Fully-coupled
nonlinear analysis of single lap adhesive joints.
International Journal of Solids and Structures,
44(7-8), 2349-2370. <a
href="http://dx.doi.org/10.1016/j.ijsolstr.2006.07
.009">[More Information]</a>
2007
Sun, D., Tong, L. (2007). Modeling of wireless
remote shape control for beams using nonlinear
photostrictive actuators. International Journal of
Solids and Structures, 44, 672-684. <a
href="http://dx.doi.org/10.1016/j.ijsolstr.2006.05
.013">[More Information]</a>
Wood, M., Sun, X., Tong, L., Luo, Q., Katzos,
A., Rispler, A. (2007). A new ENF test specimen
for the mode II delamination toughness testing of
stitched woven CFRP laminates. Journal of
Composite Materials, 41(14), 1743-1772.
Luo, Q., Tong, L. (2007). Nonlinear Analysis of
Bonded Composite Patch Repairs. Sixteenth
INTERNATIONAL CONFERENCE ON
COMPOSITE MATERIALS (ICCM-16,2007),
Japan: Japan Society for Composite Materials.
Luo, Q., Tong, L. (2007). A segment based
sequential least squares algorithm with optimum
energy control for tracking the dynamic shapes
of smart structures. Smart Materials and
Structures, 16(5), 1517-1526.
Tong, L., Sun, X., Tan, P. (2007). On the effect
of long carbon nanotubes on
mode i delamination toughness of laminated
Tan, P., Tong, L. (2007). Active vibration
control of a laminated composite beam using
MFRC patches. Sixteenth INTERNATIONAL
CONFERENCE ON COMPOSITE MATERIALS
(ICCM-16,2007), Japan: Japan Society for
Composite Materials.
composites. Sixteenth INTERNATIONAL
CONFERENCE ON COMPOSITE MATERIALS
(ICCM-16,2007), Japan: Japan Society for
Composite Materials.
Tong, L., Sun, X. (2007). Bending effect of
through-thickness reinforcement rods on mode II
delamination toughness of ENF specimen:
Elastic and rigid-perfectly plastic analyses.
Composites Part A: Applied Science and
Manufacturing, 38(2), 323-336. <a
href="http://dx.doi.org/10.1016/j.compositesa.20
06.04.001">[More Information]</a>
mechanisms using a parameterization level set
method. Journal of Computational Physics, 227,
680-705. <a
href="http://dx.doi.org/10.1016/j.jcp.2007.08.01
1">[More Information]</a>
Luo, Q., Tong, L. (2007). Closed-Form Solutions
for Nonlinear Analysis of Single-Sided Bonded
Composite Patch Repairs. AIAA Journal, 45(12),
2957-2965.
Tan, P., Tong, L. (2007). Delamination detection
of a laminated beam using magnetostrictive
composite sensor and actuator. Journal of
Reinforced Plastics and Composites, 26(8),
831-846.
Nguyen, Q., Tong, L., Gu, Y. (2007).
Evolutionary piezoelectric actuators design
optimisation for static shape control of smart
plates. Computer Methods in Applied Mechanics
and Engineering, 197, 47-60. <a
href="http://dx.doi.org/10.1016/j.cma.2007.07.01
Luo, Z., Tong, L., Wang, M., Wang, S. (2007).
Shape and topology optimization of compliant
Wood, M., Sun, X., Tong, L., Katzos, A.,
Rispler, A., Mai, Y. (2007). The effect of stitch
distribution on Mode I delamination toughness of
stitched laminated composites - experimental
results and FEA simulation. Composites Science
and Technology, 67(6), 1058-1072. <a
href="http://dx.doi.org/10.1016/j.compscitech.20
06.06.002">[More Information]</a>
Kiang, J., Tong, L. (2007). Three-dimensional
constitutive equations for Ni-Mn-Ga single
crystals. Journal of Magnetism and Magnetic
Materials, 313, 214-229. <a
href="http://dx.doi.org/10.1016/j.jmmm.2007.01.
016">[More Information]</a>
Nguyen, Q., Tong, L. (2007). Voltage and
evolutionary piezoelectric actuator design
optimisation for static shape control of smart
Publications for Liyong Tong
plate structures. Materials and Design, 28(2),
387-399.
href="http://dx.doi.org/10.1016/j.ijadhadh.2004.
04.007">[More Information]</a>
2006
Sun, D., Tong, L. (2005). Design optimization of
piezoelectric actuator patterns for static shape
control of smart plates. Smart Materials and
Structures, 14(6), 1353-1362.
Wood, M., Tong, L., Sun, X. (2006). A
parametric study on the design of stitched
laminated DCB specimens. Composite
Structures, 75(1-4), 72-78. <a
href="http://dx.doi.org/10.1016/j.compstruct.200
6.04.061">[More Information]</a>
Tan, P., Tong, L. (2006). A sensor charge output
deviation method for delamination detection
using isolated piezoelectric actuator and sensor
patches. Composites Part B: Engineering,
37(7-8), 583-592. <a
href="http://dx.doi.org/10.1016/j.compositesb.20
06.03.007">[More Information]</a>
Luo, Q., Tong, L. (2006). A sequential linear
least square algorithm for tracking dynamic
shapes of smart structures. International Journal
for Numerical Methods in Engineering, 67(1),
66-88. <a
href="http://dx.doi.org/10.1002/nme.1627">[Mo
re Information]</a>
Luo, Q., Tong, L. (2006). High precision shape
control of plates using orthotropic piezoelectric
actuators. Finite Elements in Analysis and
Design, 42(11), 1009-1020. <a
href="http://dx.doi.org/10.1016/j.finel.2006.03.0
02">[More Information]</a>
Tan, P., Tong, L. (2006). Multiple delamination
detection of composite beam using
magnetostrictive patch. AIAA Journal, 44(11),
2547-2551.
Chen, B., Tong, L., Gu, Y. (2006). Precise time
integration for linear two-point boundary value
problems. Applied Mathematics and
Computation, 175(1), 182-211. <a
href="http://dx.doi.org/10.1016/j.amc.2005.08.00
1">[More Information]</a>
Chen, W., Sun, D., Wang, D., Wei, J., Tong, L.,
Wang, Q. (2006). Reduction approaches for
vibration control of repetitive structures. Applied
Mathematics and Mechanics, 27(5), 637-644. <a
href="http://dx.doi.org/10.1007/s10483-006-050
9-z">[More Information]</a>
Woon, S., Tong, L., Querin, O., Steven, G.
(2005). Effective optimisation of continuum
topologies through a multi-GA system.
Computer Methods in Applied Mechanics and
Engineering, 194(30-33), 3416-3437. <a
href="http://dx.doi.org/10.1016/j.cma.2004.12.02
5">[More Information]</a>
Sun, D., Tong, L. (2005). Energy optimization in
local shape control of structures with nonlinear
piezoelectric actuators. AIAA Journal, 43(10),
2210-2217.
Zhu, J., Gu, Y., Tong, L. (2005). Formulation of
reference surface element and its applications in
dynamic analysis of delaminated composite
beams. Composite Structures, 68(4), 481-490. <a
href="http://dx.doi.org/10.1016/j.compstruct.200
4.04.014">[More Information]</a>
Tang, W., Tong, L., Gu, Y. (2005). Improved
genetic algorithm for design optimization of truss
structures with size, shape and topology
variables. International Journal for Numerical
Methods in Engineering, 62(13), 1737-1762. <a
href="http://dx.doi.org/10.1002/nme.1244">[Mo
re Information]</a>
Sun, X., Liu, H., Yan, W., Tong, L., Mai, Y.
(2005). Modelling composite reinforcement by
stitching and z-pinning. In C Soutis, Shefield
University & P.W.R. Beaumont, Cambridge
University, UK (Eds.), Mutli-scale modelling of
composite material systems: The art of predictive
damage modelling, (pp. 319-355). Cambridge,
England: Woodhead Publishing Ltd.
Kiang, J., Tong, L. (2005). Modelling of
magneto-mechanical behavior of Ni-Mn-Ga
single crystals. Journal of Magnetism and
Magnetic Materials, 292, 394-412.
2005
Sun, D., Tong, L. (2005). Optimal voltage design
for static shape control of smart structures with
nonlinear piezoelectric actuators. Journal of
Reinforced Plastics and Composites, 24(4),
355-373.
Tan, P., Tong, L. (2005). A Dynamic Model for
Delamination Identification using MFRC Patch.
2nd International Conference on Structural
Health Monitoring of Intelligent Infrastructure,
London, UK: Taylor and Francis.
Sun, D., Tong, L., Jin, D., Chen, W., Wang, D.
(2005). Static shape control of repetitive
structures integrated with piezoelectric actuators.
Smart Materials and Structures, 14(6),
1410-1420.
Cheuk, P., Tong, L., Rider, A., Wang, J. (2005).
Analysis of energy release rate for fatigue
cracked metal-to-metal double-lap shear joints.
International Journal of Adhesion and
Adhesives, 25(2), 181-191. <a
Chen, B., Tong, L. (2005). Thermo-mechanically
coupled sensitivity analysis and design
optimization of functionally graded materials.
Computer Methods in Applied Mechanics and
Engineering, 194(18-20), 1891-1911. <a
Publications for Liyong Tong
href="http://dx.doi.org/10.1016/j.cma.2004.07.00
5">[More Information]</a>
2004
Sun, D., Tong, L. (2004). A
Compressional-Shear Model For Vibratoin
Control Of Beams With Active Constrained
Layer Damping. International Journal of
Mechanical Sciences, 46(9), 1307-1325. <a
href="http://dx.doi.org/10.1016/j.ijmecsci.2004.0
8.005">[More Information]</a>
Tan, P., Tong, L. (2004). A Delamination
Detection Model For Composite Beams Using
Pfrc Sensor/Actuator. Composites Part A:
Applied Science and Manufacturing, 35(2),
231-247. <a
href="http://dx.doi.org/10.1016/j.compositesa.20
03.09.024">[More Information]</a>
Sun, D., Tong, L. (2004). Adhesive Element
Modelling And Weighted Static Shape Control
Of Composite Plates With Piezoelectric Actuator
Patches. International Journal for Numerical
Methods in Engineering, 60(11), 1911-1932. <a
href="http://dx.doi.org/10.1002/nme.1030">[Mo
re Information]</a>
Luo, Q., Tong, L. (2004). An Accurate
Laminated Element For Piezoelectric Smart
Beams Including Peel Stress. Computational
Mechanics, 33(2), 108-120. <a
href="http://dx.doi.org/10.1007/s00466-003-050
4-6">[More Information]</a>
Luo, Q., Tong, L. (2004). An Adhesively
Laminated Plate Element For Pzt Smart Plates.
Computational Mechanics, 34(3), 224-236. <a
href="http://dx.doi.org/10.1007/s00466-004-056
7-z">[More Information]</a>
Sun, D., Tong, L. (2004). An Equivalent Model
For Smart Beams With Debonded Piezoelectric
Patches. Journal of Sound and Vibration,
276(3-5), 933-956.
Sun, D., Tong, L., Wang, D. (2004). An
Incremental Algorithm For Static Shape Control
Of Smart Structures With Nonlinear
Piezoelectric Actuators. International Journal of
Solids and Structures, 41(9-10), 2277-2292. <a
href="http://dx.doi.org/10.1016/j.ijsolstr.2003.12
.002">[More Information]</a>
Tong, L., Sun, X. (2004). Bending Effect Of
Through-Thickness Reinforcement Rods On
Mode I Delamination Toughness Of Dcb
Specimen. I. Linearly Elastic And
Rigid-Perfectly Plastic Models. International
Journal of Solids and Structures, 41(24-25),
6831-6852. <a
href="http://dx.doi.org/10.1016/j.ijsolstr.2004.06
.010">[More Information]</a>
Sun, D., Tong, L. (2004). Curvature Effect On
Fracture Toughness Of Cracked Cylindrical
Shells Boned With Patches. AIAA Journal,
42(12), 2585-2591.
Tan, P., Tong, L. (2004). Delamination Detection
Of A Magnetostrictive Composite Beam Using A
Movable Sensing And Actuation Coil. 11th
US-Japan Conference on Composite Materials,
Japan: Yamagata University, Japan.
Tan, P., Tong, L. (2004). Delamination Detection
Of Composite Beams Using Piezoelectric
Sensors With Evenly Distributed Electrode
Strips. Journal of Composite Materials, 38(4),
321-352.
Sun, X., Tong, L., Wood, M., Mai, Y. (2004).
Effect Of Stitch Distribution On Mode I
Delamination Toughness Of Laminated Dcb
Specimens. Composites Science and Technology,
64(7-8), 967-981. <a
href="http://dx.doi.org/10.1016/j.compscitech.20
03.07.004">[More Information]</a>
Sun, X., Tong, L. (2004). Fracture Toughness
Analysis Of Inclined Crack In Cylindrical Shell
Repaired With Bonded Composite Patch.
Composite Structures, 66(1-4), 639-645. <a
href="http://dx.doi.org/10.1016/j.compstruct.200
4.05.022">[More Information]</a>
Tan, P., Tong, L. (2004). Identification Of
Delamination In A Composite Beam Using
Integrated Piezoelectric Sensor/Actuator Layer.
Composite Structures, 66(1-4), 391-398. <a
href="http://dx.doi.org/10.1016/j.compstruct.200
4.04.060">[More Information]</a>
Luo, Q., Tong, L. (2004). Linear And Higher
Order Displacement Theories For Adhesively
Bonded Lap Joints. International Journal of
Solids and Structures, 41(22-23), 6351-6381. <a
href="http://dx.doi.org/10.1016/j.ijsolstr.2004.05
.024">[More Information]</a>
Nguyen, V., Tong, L. (2004). Modal Shape
Control Of Smart Composite Plates Using
Piezoelectric Actuators. 14th International
Conference on Composite Materials (ICCM-14),
Dearborn, Michigan, USA: Society of
Manufacturing Engineers.
Yang, T., Li, Z., Wang, J., Tong, L. (2004).
Overall Moduli And Natural Frequencies Of
Composite Laminates Containing Multiple
Interlaminar Transverse Cracks. Composite
Structures, 66(1-4), 223-230. <a
href="http://dx.doi.org/10.1016/j.compstruct.200
4.04.041">[More Information]</a>
Tan, P., Tong, L. (2004). Prediction Of
Non-Linear Electromagnetoelastic Properties For
Piezoelectric/Piezomagnetic Fibre Reinforced
Composites. Institution of Mechanical
Engineers. Proceedings. Part L: Journal of
Materials: Design and Applications, 218(L2),
Publications for Liyong Tong
111-127.
Chen, B., Tong, L. (2004). Sensitivity Analysis
Of Heat Conduction For Functionally Graded
Materials. Materials and Design, 25(8), 663-672.
Nguyen, V., Tong, L. (2004). Shape Control Of
Smart Composite Plate With Non-Rectangular
Piezoelectric Actuators. Composite Structures,
66(1-4), 207-214. <a
href="http://dx.doi.org/10.1016/j.compstruct.200
4.04.039">[More Information]</a>
Sun, D., Tong, L. (2004). Static Shape Control
Of Structures Using Nonlinear Piezoelectric
Actuators With Energy Constraints. Smart
Materials and Structures, 13(5), 1059-1068.
Chen, B., Tong, L., Gu, Y., Zhang, H., Ochoa, O.
(2004). Transient Heat Transfer Analysis Of
Functionally Graded Materials Using Adaptive
Precise Time Integration And Graded Finite
Elements. Numerical Heat Transfer Part
B-Fundamentals, 45(2), 181-200.
2003
Tong, L., Sun, X. (2003). Adhesive elements for
stress analysis of bonded patch to curved
thin-walled structures. Computational
Mechanics, 30(2), 143-154. <a
href="http://dx.doi.org/10.1007/s00466-002-037
4-3">[More Information]</a>
Sun, D., Tong, L. (2003). Closed-loop based
detection of debonding of piezoelectric actuator
patches in controlled beams. International
Journal of Solids and Structures, 40(10),
2449-2471.
Sun, D., Tong, L. (2003). Effect of debonding in
active constrained layer damping patches on
hybrid control of smart beams. International
Journal of Solids and Structures, 40(7),
1633-1651.
Tong, L., Luo, Q. (2003). Exact dynamic
solutions to piezoelectric smart beams including
peel stresses. I : Theory and application.
International Journal of Solids and Structures,
40(18), 4789-4812.
Luo, Q., Tong, L. (2003). Exact dynamic
solutions to piezoelectric smart beams including
peel stresses. Part 2: Numerical results,
comparison and approximate solution.
International Journal of Solids and Structures,
40(18), 4813-4836.
Woon, S., Tong, L., Querin, O., Steven, G.
(2003). Knowledge-based algorithms in
fixed-grid GA shape optimization. International
Journal for Numerical Methods in Engineering,
58(4), 643-660. <a
href="http://dx.doi.org/10.1002/nme.795">[More
Information]</a>
Tong, L., Sun, X. (2003). Nonlinear stress
analysis for bonded patch to curved thin-walled
structures. International Journal of Adhesion and
Adhesives, 23(5), 349-364.
Tong, L., Sun, X. (2003). Optimization of Ply
Drop-offs in Bonded Patch to Cylindrical Shell
Structures. Journal of Composite Materials,
37(14), 1289-1314.
Sun, D., Tong, L. (2003). Optimum Control
Voltage Design for Constrained Static Shape
Control of Piezoelectric Structures. AIAA
Journal, 41(12), 2444-2450.
Tong, L., Sun, X. (2003). Shape optimization of
bonded patch to cylindrical shell structures.
International Journal for Numerical Methods in
Engineering, 58(5), 793-820. <a
href="http://dx.doi.org/10.1002/nme.802">[More
Information]</a>
2002
Tong, L., Mouritz, A., Bannister, M. (2002). 3D
Fibre Reinforced Polymer Composites. United
States: Elsevier.
Tan, P., Tong, L. (2002). A
micro-electromechanics model for the 3-D PFRC
materials. Journal of Composite Materials,
36(2), 127-141.
Tan, P., Tong, L. (2002). A one-dimensional
model for non-linear behaviour of piezoelectric
composite materials. Composite Structures,
58(4), 551-561.
Qi, B., Ness, R., Tong, L. (2002). A stitched
blade-stiffened RFI composite panel under shear
loading. Journal of Reinforced Plastics and
Composites, 21(3), 255-276.
Wang, J., Tong, L. (2002). A study of the
vibration of delaminated beams using a nonlinear
anti-interpenetration constraint model.
Composite Structures, 57(1-4), 483-488.
Zhang, L., Tong, L., Gal,, J. (2002). Applied
Mechanics: Progress and Applications.
Australasia Congress on Applied Mechanics,
Singapore: World Scientific Publishing.
Sun, D., Tong, L. (2002). Control stability
analysis of smart beams with debonded
piezoelectric actuator layer. AIAA Journal, 40(9),
1852-1859.
Tan, P., Tong, L., Sun, D. (2002). Dynamic
characteristics of a beam system with active
piezoelectric fiber reinforced composite layers.
Composites Part B: Engineering, 33(7), 545-555.
Tong, L., Tan, P., Steven, G. (2002). Effect of
yarn waviness on strengths of 3D orthogonal
woven CFRP composite materials. Journal of
Reinforced Plastics and Composites, 21(2),
153-173.
Luo, Q., Tong, L. (2002). Exact static solutions
Publications for Liyong Tong
to peizoelectric smart beams including peel
stresses. II. Numerical results, comparison and
discussion. International Journal of Solids and
Structures, 39(18), 4697-4722.
smart composite plate structures with
non-rectangular shaped PZT actuators. Applied
Mechanics Progress and Applications,
Singapore: World Scientific Publishing.
Luo, Q., Tong, L. (2002). Exact static solutions
to piezoelectric smart beams including peel
stresses. I. Theoretical formulation. International
Journal of Solids and Structures, 39(18),
4677-4695.
Tong, L., Sun, X. (2002). Shape optimization of
a bonded patch to a cylindrical shell. Applied
Mechanics Progress and Applications,
Singapore: World Scientific Publishing.
Cheuk, P., Tong, L. (2002). Failure of adhesive
bonded composite lap shear joints with
embedded precrack. Composites Science and
Technology, 62(7-8), 1079-1095.
Cheuk, P., Tong, L., Wang, C., Baker, A.,
Chalkley, P. (2002). Fatigue crack growth in
adhesively bonded composite-metal double-lap
joints. Composite Structures, 57(1-4), 109-115.
Sun, D., Tong, L. (2002). Frequency response of
beams with debonded piezoelectric actuator
layer. Applied Mechanics Progress and
Applications, Singapore: World Scientific
Publishing.
Tan, P., Tong, L. (2002). Investigation of loading
assumptions on the effective electroelastic
constants for PFRC materials. Composite
Structures, 57(1-4), 101-108.
Sun, D., Tong, L., Wang, D. (2002). Modal
actuator/sensor by modulating thickness of
piezoelectric layers for smart plates. AIAA
Journal, 40(8), 1676-1679.
Sun, D., Tong, L. (2002). Modeling and analysis
of curved beams with debonded piezoelectric
sensor/actuator patches. International Journal of
Mechanical Sciences, 44(8), 1755-1777.
Sun, D., Tong, L. (2002). Modelling and
vibration control of beams with partially
debonded active constrained layer damping
patch. Journal of Sound and Vibration, 252(3),
493-507. <a
href="http://dx.doi.org/10.1006/jsvi.2001.4033">
[More Information]</a>
Chee, C., Tong, L., Steven, G. (2002). Static
shape control of composite plates using a
slope-displacement-based algorithm. AIAA
Journal, 40(8), 1611-1618.
2001
Woon, S., Tong, L., Steven, G., Querin, O.
(2001). Displacement and stress based fitness
function considerations in FG-GA shape
optimisation. 3rd ASMO UK/ISSMO Conference,
: Ads & Adea.
Sun, D., Tong, L., Atluri,, S. (2001). Effects of
piezoelectric sensor/actuator debonding on
vibration control of smart beams. International
Journal of Solids and Structures, 38, 9033-9051.
Woon, S., Tong, L., Querin, O., Steven, G.
(2001). Implementation of knowledge based
algorithms in FG-GA structuralshape
optimisation. 4th World congress of Structural
and Multidisiplinary optimization, : Ads & Adea.
Higgs, W., Tong, L., Steven, G. (2001). Lateral
Buckling behavior of pneumatically stiffened,
reinforced composite beams in bending. AIAA
Journal, 39, 303-307.
Tan, P., Tong, L., Steven, G. (2001). Mechanical
behavior for 3-D orthogonal woven
E-glass/epoxy composites. Journal of Reinforced
Plastics and Composites, 20(04), 274-303.
Tan, P., Tong, L. (2001).
Micro-electromechanics models for
piezoelectric-fiber-reinforced composite
materials. Composites Science and Technology,
61, 759-769.
Tan, P., Tong, L. (2002). Modelling for the
electro-magneto-thermo-elastic properties of
piezoelectric-magnetic fiber reinforced
composites. Composites Part A: Applied Science
and Manufacturing, 33(5), 631-645.
Tong, L., Tan, P. (2001).
Micro-electromechanics models for the
electro-magneto-elastic properties of PEMFRC
materials. 13th International Conference on
Composite Materials. Ads & Adea.
Luo, Q., Tong, L. (2002). Peeling effects on
performance of piezoelectric actuators and
sensors in smart beams. Applied Mechanics
Progress and Applications, Singapore: World
Scientific Publishing.
Tan, P., Tong, L. (2001). Micromechanics
models for non-linear behavior of piezo-electrid
fiber reinforced composite materials.
International Journal of Solids and Structures,
38, 8999-9032.
Chee, C., Tong, L., Steven, G. (2002).
Piezoelectric actuator orientation optimization
for static shape control of composite plates.
Composite Structures, 55, 169-184.
Sun, D., Tong, L. (2001). Modal control of smart
shells by optimized discretely distributed
piezoelectric transducers. International Journal
of Solids and Structures, 38, 3281-3299.
Nguyen, V., Tong, L. (2002). Shape control of
Sun, X., Tong, L., Chen, H. (2001). Progressive
Publications for Liyong Tong
failure analysis of laminated plates with
delamination. Journal of Reinforced Plastics and
Composites, 20(16), 1370-1389.
Tong, L., Sun, D., Atluri,, S. (2001). Sensing and
actuating behaviours of piezoelectric layers with
debonding in smart beams. Smart Materials and
Structures, 10, 713-723.
Sun, D., Tong, L. (2001). Sensor/actuator
equations for curved piezoelectric fibers and
vibration control of composite beams using fiber
modal actuators/sensors. Journal of Sound and
Vibration, 241, 297-314.
Chee, C., Tong, L., Steven, G. (2001). Static
shape control of composite plates using a
curvature-displacement based algorithm.
International Journal of Solids and Structures,
38, 6381-6403.
Tong, L., Sun, X. (2001). Stress analysis of
curved joints with non-uniform bondline
thickness. 13th International Conference on
Composite Materials. Ads & Adea.
Sun, D., Tong, L. (2001). Vibration control of
beams with debonded active constrained layer
damping. 13th International Conference on
Composite Materials. Ads & Adea.
Sun, D., Tong, L., Wang, D. (2001). Vibration
control of plates using discretely distributed
piezoelectrid quasi-modal actuators/sensors.
AIAA Journal, 39(9), 1766-1772.