11/30/2015
Document No. MS019, Rev. 2
Flowdowns for Prime Contract FA8807-13-C-0002, GPS III Long Lead
Full Text Clauses
H002 ENABLING CLAUSE FOR GOVERNMENT PROGRAM CONTRACTS REQUIRING
INTERFACE WITH AEROSPACE FFRDC CONTRACT SUPPORT (FEB 2013) (Applicable for all
purchase orders/subcontracts.)
a. This contract covers part of the GPS III program which is under the general program management of the
Air Force Space and Missile Systems Center (SMC). The Air Force has entered into a contract with The
Aerospace Corporation, a California nonprofit corporation operating a Federally Funded Research and
Development Center (FFRDC), for the services of a technical group that will support the DoD/U.S.
Government program office by performing General Systems Engineering and Integration, Technical Review,
and/or Technical Support including informing the commander or director of the various Department of
Defense ("DoD") organizations it supports and any U.S. Government program office of product or process
defects and other relevant information, which, if not disclosed to the U.S. Government, could have adverse
effects on the reliability and mission success of a U.S. Government program.
1. General Systems Engineering and Integration (GSE&I) deals with overall system definition;
integration both within the system and with associated systems; analysis of system segment and subsystem
design; design compromises and tradeoffs; definition of interfaces; review of hardware and software,
including manufacturing and quality control; observation, review and evaluation of tests and test data; support
of launch, flight test, and orbital operations; appraisal of the contractors' technical performance through
meetings with contractors and subcontractors, exchange and analysis of information on progress and
problems; review of plans for future work; developing solutions to problems; technical alternatives for
reduced program risk; providing comments and recommendations in writing to the applicable DoD System
Program Manager and/or Project Officer as an independent technical assessment for consideration for
modifying the program or redirecting the contractor's efforts; all to the extent necessary to assure timely and
economical accomplishment of program objectives consistent with mission requirements.
2. Technical Review (TR) includes the process of appraising the technical performance of the
contractor through meetings, exchanging information on progress and problems, reviewing reports, evaluating
presentations, reviewing hardware and software, witnessing and evaluating tests, analyzing plans for future
work, evaluating efforts relative to contract technical objectives, and providing comments and
recommendations in writing to the applicable Air Force Program Manager as an independent technical
assessment for consideration for modifying the program or redirecting the contractor's efforts to assure timely
and economical accomplishment of program objectives.
3. Technical Support (TS) deals with broad areas of specialized needs of customers for planning,
system architecting, research and development, horizontal engineering, or analytical activities for which The
Aerospace Corporation is uniquely qualified by virtue of its specially qualified personnel, facilities, or
corporate memory. The categories of TS tasks are: Selected Research, Development, Test and Evaluation;
Plans and System Architecture; Multi-Program Systems Enhancement; International Technology Assessment;
and Acquisition Support.
b. In the performance of this contract, the contractor agrees to cooperate with The Aerospace Corporation by
1) responding to invitations from authorized U. S. Government personnel to attend meetings; 2) by providing
access to technical information and research, development planning data such as, but not limited to, design
Document No. MS019, Rev. 2
1 of 8
11/30/2015
11/30/2015
Document No. MS019, Rev. 2
Flowdowns for Prime Contract FA8807-13-C-0002, GPS III Long Lead
and development analyses, test data and results, equipment and process specifications, test and test equipment
specifications and procedures, parts and quality control procedures, records and data, manufacturing and
assembly procedures, and schedule and milestone data, all in their original form or reproduced form and
including top-level life cycle cost* data, where available; 3) by discussing technical matters relating to this
program; 4) by providing access to contractor facilities utilized in the performance of this contract; 5) and by
allowing observation of technical activities by appropriate technical personnel of The Aerospace Corporation.
c. The contractor further agrees to include in all subcontracts a clause requiring compliance by subcontractor
and supplier and succeeding levels of subcontractors and suppliers with the response and access and
disclosure provisions of this Enabling Clause, subject to coordination with the contractor, except for
subcontracts for commercial items or commercial services. This agreement does not relieve the contractor of
its responsibility to manage the subcontracts effectively and efficiently nor is it intended to establish privity of
contract between the Government or The Aerospace Corporation and such subcontractors or suppliers, except
as indicated in paragraph (d) below.
d. The Aerospace Corporation shall protect the proprietary information of contractors, subcontractors, and
suppliers in accordance with the Nondisclosure Agreement The Aerospace Corporation entered into with the
Air Force, a copy of which is available upon request. This Nondisclosure Agreement satisfies the
Nondisclosure Agreement requirements set forth in 10 U.S.C. §2320 (f)(2)(B), and provides that such
contractors, subcontractors, and suppliers are intended third-party beneficiaries under the Nondisclosure
Agreement and shall have the full rights to enforce the terms and conditions of the Nondisclosure Agreement
directly against The Aerospace Corporation, as if they had been signatory party hereto. Each such contractor,
subcontractor, or supplier hereby waives any requirement for The Aerospace Corporation to enter into any
separate company-to-company confidentiality or other nondisclosure agreements.
e. Aerospace shall make the technical information (including proprietary information) available only to its
Trustees, officers, employees, contractor labor, consultants, and attorneys who have a need to know, and
Aerospace shall maintain between itself and the foregoing binding agreements of general application as may
be necessary to fulfill their obligations under the Nondisclosure Agreement referred to herein, and Aerospace
agrees that it will inform contractors, subcontractors, and suppliers if it plans to use consultants, or contract
labor personnel and, upon the request of such contractor, subcontractor, or supplier, to have its consultants
and contract labor personnel execute nondisclosure agreements directly therewith.
f. The Aerospace Corporation personnel are not authorized to direct the contractor in any manner. The
contractor agrees to accept technical direction as follows:
1. Technical direction under this contract will be given to the contractor solely by SMC.
2. Whenever it becomes necessary to modify the contract and redirect the effort, a change order
signed by the Contracting Officer or a Supplemental Agreement signed by both the Contracting Officer and
the contractor will be issued.
* Cost data is defined as information associated with the programmatic elements of life cycle (concept,
development, production, operations, and retirement) of the system/program. As defined, cost data differs
from "financial" data, which is defined as information associated with the internal workings of a company or
contractor that is not specific to a project or program.
Document No. MS019, Rev. 2
2 of 8
11/30/2015
11/30/2015
Document No. MS019, Rev. 2
Flowdowns for Prime Contract FA8807-13-C-0002, GPS III Long Lead
H003 ENABLING CLAUSE FOR GOVERNMENT TECHNICAL GROUP (APR 2013) (Applicable
for all purchase orders/subcontracts.)
(a) Definition. As used in this clause, "Cost data" is defined as information associated with the programmatic
elements or life cycle (concept, development, production, operations, and retirement) of the system/program.
As defined, cost data differs from "financial" data, which is defined as information associated with the
internal workings of a company or contractor that is not specific to a project or program.
(b) This contract covers the GPS III effort under the overall program management of the Air Force Space and
Missile Systems Center at Los Angeles Air Force Base. The Air Force has entered into a contract with The
Aerospace Corporation, Tecolote, Quantech, Mitre, Business Technologies and Solutions, Inc. (BTAS),
ARINC, Canyon Consulting, and TASC, Inc., for the services of a technical group which will support the
DoD program office by performing General Systems Engineering and Integration (GSE&I) and Technical
Reviews. This clause also covers the subcontractors of these companies.
(c) GSE&I deals with overall system definition, integration both within the system and with associated
systems, review of analysis definition and requirement allocation, analysis of system, segment, and subsystem
design, design compromises and tradeoffs, definition of interfaces, review of hardware and software,
including manufacturing and quality control, observation, review and evaluation of tests and test data, support
of launch, flight test, and orbital operations, appraisal of the contractors' technical performance through
meetings with contractors and subcontractors, exchange and analysis of information on progress and
problems, review of plans for future work, developing solutions to problems, technical alternatives for
reduced program risk, providing comments and recommendations in writing to the DoD System Program
Manager and Project Officer as an independent technical assessment for consideration for modifying the
program or redirecting the contractor's efforts, all to the extent necessary to assure timely and economical
accomplishment of program objectives consistent with mission requirements. Technical Review includes the
process of appraising the technical performance of the contractor through meetings, exchanging information
on progress and problems, reviewing reports, evaluating presentations, reviewing hardware and software,
witnessing and evaluating tests, analyzing plans for future work, evaluating efforts relative to contract
technical objectives, and providing comments and recommendations in writing to the Air Force Program
Manager as an independent technical assessment for consideration for modifying the program or redirecting
the contractor's efforts to assure timely and economical accomplishment of program objectives. Technical
Support (TS) deals with broad areas of specialized needs of customers for planning, system architecting,
research and development, horizontal engineering, or analytical activities for which the Aerospace FFRDC is
uniquely qualified by virtue of its specially qualified personnel, facilities, or corporate memory. The
categories of TS tasks are: Selected Research, Development, Test and Evaluation, Plans and System
Architecture, Multi-Program Systems Enhancement, International Technology Assessment, and Acquisition
Support.
(d) In the performance of this contract, the contractor agrees to cooperate by responding to invitations from
authorized personnel to attend meetings, by providing access to technical information and research,
development planning data such as, but not limited to, design and development analyses, test data and results,
equipment and process specifications, test and test equipment specifications and procedures, parts and quality
control procedures, records and data, manufacturing and assembly procedures, and schedule and milestone
data, all in their original form or reproduced form and excluding financial data, by discussing technical
Document No. MS019, Rev. 2
3 of 8
11/30/2015
11/30/2015
Document No. MS019, Rev. 2
Flowdowns for Prime Contract FA8807-13-C-0002, GPS III Long Lead
matters relating to this program, by providing access to contractor facilities utilized in the performance of this
contract, and by allowing observation of technical activities by appropriate technical personnel. The personnel
engaged in general systems engineering, technical reviews, and integration effort are authorized access to any
technical information pertaining to this contract and are bound by their respective Non-Disclosure
Agreements (NDSs) with the Government to protect the information they receive.
(e) The contractor further agrees to include in each subcontract a clause requiring compliance by
subcontractor and succeeding levels of subcontractors with the response and access provisions of paragraph
(d) above, subject to coordination with the contractor. This agreement does not relieve the contractor of its
responsibility to manage the subcontracts effectively and efficiently nor is it intended to establish privity of
contract between the Government or its technical advisors and such subcontractors.
(f) The technical personnel are not authorized to direct the contractor in any manner. The contractor agrees to
accept technical direction as follows:
(1) Technical direction under this contract will be given to the contractor solely by the Procuring
Contracting Officer.
(2) Whenever it becomes necessary to modify the contract and redirect the effort, a Change Order
signed by the Procuring Contracting Officer or a Supplemental Agreement signed by both the Procuring
Contracting Officer and the contractor will be issued.
FAR Clauses
52.203-7, Anti-Kickback Procedures (Oct 2010)
52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Aug 2012)
52.215-21, Requirements for Certified Cost or Pricing Data and Data Other Than Certified Cost or
Pricing Data - Modifications (Oct 2010) and Alternate III (Oct 1997) (Alternate III will also apply.)
52.222-54, Employment Eligibility Verification (Jul 2012)
52.223-3, Hazardous Material Identification and Material Safety Data (Jan 1997) (Applies if this
purchase order/subcontract involves hazardous materials. "Contracting Officer" means "Lockheed Martin;"
"Government" means "Lockheed Martin and the Government." Para (b), Material Identification No: ')
Material
Identification No.
Material
Hydrazine (N2H4)
Oxidizer (MON-III)
Anhydrous Ammonia
Zirconium & Potassium Perchlorate
Titanium Hydride & Potassium Perchlorate
Document No. MS019, Rev. 2
Identification No.
042641
017380
038957
039886
013285
4 of 8
11/30/2015
11/30/2015
Document No. MS019, Rev. 2
Flowdowns for Prime Contract FA8807-13-C-0002, GPS III Long Lead
Nickel Hydroxide
Potassium Hydroxide
Thorium Fluoride
Blue Solithane
Eccobond Epoxy
Hysol EA 9309/9394
Epon 828-PtA Epoxy
Epon 828-PtA Epoxy
Dow Corning 6-1104
RTV-566B
Braycote 602/815
Silicone Rubber
Beryllium Oxide
Isopropyl Alcohol
Acetone
Gaseous Helium
Gaseous Nitrogen
Liquid Nitrogen
018935
016425
007940
041596
006188
037143/843034
038650
038651
004221
037352
012386
027650
028006
001867
032568
007043
007045
033237
52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (Applicable if you will be
providing energy consuming products which will be delivered to the Government, or the energy consuming
products are acquired by you for use in performing services at a Federally-controlled facility; furnished under
the prime contract for use by the Government; or specified in the design of a building or work, or
incorporated during its construction, renovation, or maintenance.)
52.223-18, Encouraging Contractor Policy to Ban Text Messaging While Driving (Aug 2011)
52.230-2, Cost Accounting Standards (May 2012)
52.232-16, Progress Payments (Apr 2012) and Alternate I (Mar 2000) (Applicable where progress
payments will be paid to the seller. If you are a small business concern, then Alternate I also applies.
"Contracting Officer" means "Lockheed Martin" except in paragraph (g) where it means "Lockheed Martin or
Contracting Officer." "Government" means "Lockheed Martin" except: (1) in paragraphs (d), (e) and (j)(5)
where the term is unchanged and (2) in paragraphs (g) and (i) where it means "Lockheed Martin and the
Government.")
52.232-17, Interest (Jun 1996) (Applicable if your contract contains any clauses which refers to an Interest
clause. “Government” means “Lockheed Martin.”)
52.232-99, Providing Accelerated Payments to Subcontractors (Deviation 2012-O0014) (Aug 2012)
(Applicable if Seller is a small business concern. "Government" means "Lockheed Martin" and "small
business subcontractors" means "Seller's small business lower tier subcontractors." For the avoidance of
doubt the parties understand that the government is not obligated to make accelerated payments to the
contractor and the government may discontinue making accelerated payments at any time. The payment
Document No. MS019, Rev. 2
5 of 8
11/30/2015
11/30/2015
Document No. MS019, Rev. 2
Flowdowns for Prime Contract FA8807-13-C-0002, GPS III Long Lead
terms of this purchase order/subcontract are not modified notwithstanding the issuance of any accelerated
payments under this clause.)
52.243-2, Changes—Cost-Reimbursement (Aug 1987) and Alternate II (Apr 1984) (Alternate II will also
apply if your purchase order/subcontract is cost reimbursement and is for services and supplies are to be
furnished.)
52.245-1, Government Property (Apr 2012)
52.245-9, Use and Charges (Apr 2012) (Applicable for all purchase orders/subcontracts where FAR 52.2451 is inserted. Communications with the Government under this clause will be made through Lockheed
Martin.)
52.246-15, Certificate of Conformance (Apr 1984) (Applicable if you will be making direct shipments to
the Government and there is no intervening acceptance by Lockheed Martin.)
52.248-1, Value Engineering (Oct 2010)
52.249-2, Termination for the Convenience of the Government (Fixed Price) (Apr 2012)
52.249-6, Termination (Cost Reimbursement) (May 2004)
DFARS Clauses
252.203-7003, Agency Office of the Inspector General (Apr 2012)
252.204-7000, Disclosure of Information (Dec 1991) (Applicable for all purchase orders/subcontracts. In
paragraph (b) "Contracting Officer" means "Lockheed Martin" and "45 days" means "60 days.")
252.208-7000 Intent to Furnish Precious Metals as Government-Furnished Material (Dec 1991)
(Applicable if this purchase orders/subcontracts involves precious metals.)
252.211-7007, Reporting of Government-Furnished Property (Aug 2012) (Applicable if Seller will be in
possession of Government property for the performance of this contract.)
252.211-7008, Use of Government-Assigned Serial Numbers (Sep 2010) (Applicable for all purchase
orders/subcontracts where the seller will be in the possession of Government property for the performance of
the purchase order/subcontract. If Lockheed Martin will assume responsibility for marking the property, the
clause may be excluded from the purchase order/subcontract.)
252.215-7000, Pricing Adjustments (Dec 1991)
252.219-7004, Small Business Subcontracting Plan (Test Program) (Jan 2011) (Applicable if you
participate in the DoD Test Program.)
Document No. MS019, Rev. 2
6 of 8
11/30/2015
11/30/2015
Document No. MS019, Rev. 2
Flowdowns for Prime Contract FA8807-13-C-0002, GPS III Long Lead
252.223-7008, Prohibition of Hexavalent Chromium (May 2011) (Applicable for all purchase orders/
subcontracts for supplies, maintenance and repair services, or construction materials.)
252.225-7001, Buy American and Balance of Payments Program (Jun 2012)
252.225-7009, Restriction on Acquisition of Certain Articles Containing Specialty Metals (Jun 2012)
252.225-7012, Preference for Certain Domestic Commodities (Jun 2012) (Applicable for all purchase
orders/subcontracts with any deliverables of items covered by this clause.)
252.225-7013, Duty-Free Entry (Jun 2012)
252.225-7021, Trade Agreements (Dec 2012) and Alternate I (Oct 2011) (Alternate I will also apply.)
252.225-7025, Restriction on Acquisition of Forgings (Dec 2009) (Applicable if the work contains forging
items described by the clause.)
252.227-7013, Rights in Technical Data--Noncommercial Items (Feb 2012)
252.227-7014, Rights in Noncommercial Computer Software and Noncommercial Computer Software
Documentation (Feb 2012)
252.227-7037, Validation of Restrictive Markings on Technical Data (Jun 2012)
252.227-7038, Patent Rights-Ownership by the Contractor (Large Business) (Jun 2012)
252.234-7002, Earned Value Management System (May 2011) (Applicable if you are listed in paragraph
(k) of this clause in the prime contract. "Government" means "Lockheed Martin and Government."
Paragraphs (i) and (j) are deleted.)
252.234-7004, Cost and Software Data Reporting System (Nov 2010) (Applicable if your purchase
orders/subcontracts in excess of $50,000,000. In paragraph (b), "Government" means “Lockheed Martin.”)
252.235-7003, Frequency Authorization (Dec 1991) and Alternate I (Aug 2008) (Alternate I also applies.)
252.237-7010, Prohibition on Interrogation of Detainees by Contractor Personnel (Nov 2010)
(Applicable for all purchase orders/subcontracts that may require subcontractor personnel to interact with
detainees in the course of their duties.)
252.239-7000, Protection Against Compromising Emanations (Jun 2004) (Applicable if classified work
is required. "Contracting Officer" means "Lockheed Martin." "Government" means "Lockheed Martin and
the Government" in paragraphs (c) and (d).)
252.239-7001, Information Assurance Contractor Training and Certification (Jan 2008) (Applicable if
you will be accessing DoD Information Systems.)
Document No. MS019, Rev. 2
7 of 8
11/30/2015
11/30/2015
Document No. MS019, Rev. 2
Flowdowns for Prime Contract FA8807-13-C-0002, GPS III Long Lead
252.243-7002, Requests for Equitable Adjustment (Mar 1998) (Applicable to all purchase orders/
subcontracts over $150,000. “Government” means “Lockheed Martin.”)
252.244-7000, Subcontracts for Commercial Items and Commercial Components (DoD Contracts) (Jun
2012) (Applicable if your purchase order/subcontract is for commercial items or commercial components.)
252.245-7001, Tagging, Labeling, and Marking of Government-Furnished Property (Apr 2012)
(Applicable for purchase orders/subcontracts where the items furnished by you will be subject to serialized
tracking.)
252.245-7004, Reporting, Reutilization, and Disposal (Apr 2012) (Applicable to all purchase orders/
subcontracts containing the clause at FAR 52.245-1, Government Property. "Contracting Officer" means
“Lockheed Martin.”)
252.246-7000, Material Inspection and Receiving Report (Mar 2008) (Applicable if direct shipments will
be made to the Government.)
252.246-7001, Warranty of Data (Dec 1991) and Alternate II (Dec 1991) (Applicable if you will be
delivering data. "Government" means "Lockheed Martin or the Government." "Contracting Officer" means
"Lockheed Martin." The last sentence in paragraph (b) is changed to read as follows: The warranty period
shall extend for three years after completion of delivery of the data to Lockheed Martin, or if the data is
delivered to the Government, either by Lockheed Martin or Seller, the warranty period shall extend for three
years after delivery to the Government." Alternate II will also apply when extended liability is desired and a
firm fixed price purchase order/subcontract is contemplated. )
AFFARS Clauses
5352.223-9000, Elimination of Use of Class I Ozone Depleting Substances (Nov 2012) (Applicable for all
purchase orders/subcontracts. The blank in paragraph (d) is completed with "None." In paragraph (d)
"Contracting Officer" means "Lockheed Martin.")
5352.223-9001, Health and Safety on Government Installations (Nov 2012) (Applicable if you will be
performing work on a government installation. "Contracting Officer" means "Lockheed Martin.")
5352.242-9000, Contractor Access to Air Force Installations (Nov 2012) (Applicable if you will be
performing work on a government installation. "Contracting Officer" means "Lockheed Martin." In
paragraph (e) "the prime contractor" means "Seller.")
5352.242-9001, Common Access Cards (CACS) for Contractor Personnel – AF Systems (Nov 2012)
(Applicable if you will be performing work on a government installation. All communication with the
government required by this clause shall be conducted through Lockheed Martin.)
Document No. MS019, Rev. 2
8 of 8
11/30/2015