University of Manitoba SPRINKLER PROOF-EQUIPMENT Section 16470

advertisement
University of Manitoba
Req. #
1.1
SPRINKLER PROOF-EQUIPMENT
Section 16470
Page 1
SPRINKLER PROOF-EQUIPMENT
.1
All electrical equipment installed in areas where sprinklers are also installed shall be
constructed so that exposure to water from the sprinkler heads will not impair the
effectiveness of the equipment.
.2
A separate and complete non combustible cover or roof shall be provided on all equipment.
An overhang at the front, rear and sides shall effectively prevent the entrance of water either
at the top or through projecting face plates, meters, etc.
.3
Ventilation louvers shall be of the outdoor type where falling water or water running down the
sides of the enclosure will not enter the enclosure. Where openings in the top are required for
outgoing conduits, etc. a removable gasketted plate shall be provided and conduits or cables
shall be installed using waterproof fittings.
.4
Surface mounted panel boards installed in the same areas as sprinkler heads shall be
complete with drip hoods (and shall have gasketted covers and doors. Flush mounted panel
boards shall have gaskets between trim and wall and shall have gasketted doors.)
.5
All sprinkler proofing shall comply with the latest Code requirements and with requirements of
the local inspection authorities.
Date revised November 30, 2012
Download
Related flashcards
Bronchodilators

16 Cards

Antitussives

54 Cards

Expectorants

13 Cards

Create flashcards