Interwrite PRS – 1st Time Clicker Use
The very first time that students use a
clicker, they must input their student ID
number into their clicker. This ties a
clicker ID to a student ID and is saved
with session data.
1. Turn on clicker
2. Press * (stop scan channels)
3. Press * to Setup MenuScroll ▲or▼
to ID:
4. Press Enter (green arrow key)
5. Enter your ID # (not the first 0 if
starts with 0)
6. Press Enter again.
7. Press * to exit to menu.
Menu button
Enter button
Joining a Clicker Class
 Instructor needs to start eInstruction first, and launch Powerpoint.
 Students should have entered their ID the first class using clickers.
1. Turn on clicker – should set to scanning channel,
Press <your channel> # or Letter, then Enter
2. When see [class name] in clicker display, press Enter again. You have Joined
the class.
TO ANSWER QUESTIONS
 Keep on desk (do not turn off, will enter sleep mode)
 Press any button to wake
1. Enter answer with letters or numbers Press Enter
2. “Answer Received” should appear on screen
3. Turn off at end of class