Wednesday, Oct. 16, 2002

advertisement
PHYS 1443 – Section 003
Lecture #10
Wednesday, Oct. 16, 2002
Dr. Jaehoon Yu
1.
2.
3.
4.
Linear momentum and Force
Linear Momentum Conservation
Impulse and Linear Momentum
Collisions in One and Two Dimension
Today’s homework is homework #11, due 12:00pm, next Wednesday!!
Wednesday, Oct. 16, 2002
PHYS 1443-003, Fall 2002
Dr. Jaehoon Yu
1
Reminder
• I need to see the following students:
– Matt Andrews
– David Hunt
– Dhumil Patel
Wednesday, Oct. 16, 2002
PHYS 1443-003, Fall 2002
Dr. Jaehoon Yu
2
Linear Momentum
The principle of energy conservation can be used to solve problems
that are harder to solve just using Newton’s laws. It is used to
describe motion of an object or a system of objects.
A new concept of linear momentum can also be used to solve physical
problems, especially the problems involving collisions of objects.
Linear momentum of an object whose mass is m
and is moving at a velocity of v is defined as
What can you tell from this
definition about momentum?
What else can use see from the
definition? Do you see force?
Wednesday, Oct. 16, 2002
1.
2.
3.
4.
p  mv
Momentum is a vector quantity.
The heavier the object the higher the momentum
The higher the velocity the higher the momentum
Its unit is kg.m/s
The change of momentum in a given time interval
 
PHYS 1443-003, Fall 2002
Dr. Jaehoon Yu
dp d
dv
 ma  F

mv  m
dt
dt
dt
3
Linear Momentum and Forces
 
dp
d
F

mv
dt
dt
•
•
•
What can we learn from this
Force-momentum relationship?
The rate of the change of particle’s momentum is the same as
the net force exerted on it.
When net force is 0, the particle’s linear momentum is
constant.
If a particle is isolated, the particle experiences no net force,
therefore its momentum does not change and is conserved.
Something else we can do
with this relationship. What
do you think it is?
Can you think of a
few cases like this?
Wednesday, Oct. 16, 2002
The relationship can be used to study
the case where the mass changes as a
function of time.
Motion of a meteorite
PHYS 1443-003, Fall 2002
Dr. Jaehoon Yu
Trajectory a satellite
4
Conservation of Linear Momentum in a Two
Particle System
Consider a system with two particles that does not have any external
forces exerting on it. What is the impact of Newton’s 3rd Law?
If particle#1 exerts force on particle #2, there must be another force that
the particle #2 exerts on #1 as the reaction force. Both the forces are
internal forces and the net force in the SYSTEM is still 0.
Let say that the particle #1 has momentum
Now how would the momenta
p1 and #2 has p2 at some point of time.
of these particles look like?
Using momentumforce relationship
And since net force
of this system is 0
F 21 
d p1
dt
F
and
 F 12  F 21
F 12 
d p2
dt


d p 2 d p1  d p  p
0


2
1
dt
dt
dt
Therefore p 2  p1  const The total linear momentum of the system is conserved!!!
Wednesday, Oct. 16, 2002
PHYS 1443-003, Fall 2002
Dr. Jaehoon Yu
5
More on Conservation of Linear Momentum in
a Two Particle System
From the previous slide we’ve learned that the total
momentum of the system is conserved if no external
forces are exerted on the system.
 p p
p 2i  p1i  p 2 f  p1 f
Mathematically this statement can be written as
xi
system
P

xf
system
P
yi
system
This can be generalized into
conservation of linear momentum in
many particle systems.
Wednesday, Oct. 16, 2002
 p1  const
As in the case of energy conservation, this means
that the total vector sum of all momenta in the
system is the same before and after any interaction
What does this mean?
P
2

P
yf
system
P
zi
system

P
zf
system
Whenever two or more particles in an
isolated system interact, the total
momentum of the system remains constant.
PHYS 1443-003, Fall 2002
Dr. Jaehoon Yu
6
Example 9.1
Estimate an astronaut’s resulting velocity after he throws his book to a
direction in the space to move to a direction.
vA
vB
From momentum conservation, we can write
p i  0  p f  mA v A  mB v B
Assuming the astronaut’s mass if 70kg, and the book’s
mass is 1kg and using linear momentum conservation
vA  
mB v B
1

vB
mA
70
Now if the book gained a velocity
of 20 m/s in +x-direction, the
Astronaut’s velocity is
Wednesday, Oct. 16, 2002
 
1
vA  
20i  0.3i m / s 
70
PHYS 1443-003, Fall 2002
Dr. Jaehoon Yu
7
Example 9.2
A type of particle, neutral kaon (K0) decays (breaks up) into a pair of particles called
pions (p+ and p-) that are oppositely charged but equal mass. Assuming K0 is
initially produced at rest, prove that the two pions must have mumenta that are equal
in magnitude and opposite in direction.
This reaction can be written as
K0
pp
p
p
K p p
0
pp

Since this system consists of a K0 in the initial state
which results in two pions in the final state, the
momentum must be conserved. So we can write
Since K0 is produced at rest its
momentum is 0.

p K 0  pp   pp 
p K 0  pp   pp   0
pp    p p 
Therefore, the two pions from this kaon decay have the
momanta with same magnitude but in opposite direction.
Wednesday, Oct. 16, 2002
PHYS 1443-003, Fall 2002
Dr. Jaehoon Yu
8
Impulse and Linear Momentum
Net force causes change of momentum 
Newton’s second law
By integrating the above
equation in a time interval ti to
tf, one can obtain impulse I.
So what do you
think an impulse is?

tf
ti
F
dp
dt
tf
d p  p f  p i  D p   F dt
t
i
d p  Fdt
tf
I   F dt  D p
ti
Impulse of the force F acting on a particle over the time
interval Dt=tf-ti is equal to the change of the momentum of
the particle caused by that force. Impulse is the degree of
which an external force changes momentum.
The above statement is called the impulse-momentum theorem and is equivalent to Newton’s second law.
What are the
dimension and
unit of Impulse?
What is the
direction of an
impulse vector?
Defining a time-averaged force
1 tf
F
F dt

t
i
Dt
Wednesday, Oct. 16, 2002
Impulse can be rewritten
If force is constant
I  FDt
I  F Dt
It is generally approximated that the impulse force exerted acts
PHYS 1443-003, Fall 2002
on a short timeDr.but
muchYugreater than any other forces present.
Jaehoon
9
Example 9.3
A golf ball of mass 50g is struck by a club. The force exerted on the ball by the club
varies from 0, at the instant before contact, up to some maximum value at which the
ball is deformed and then back to 0 when the ball leaves the club. Assuming the ball
travels 200m. Estimate the magnitude of the impulse caused by the collision.
vB
B
m
The range R of a projectile is
vB2 sin 2 B
R
 200m
g
Let’s assume that launch angle i=45o.
vB  200  g  1960  44m / s
Then the speed becomes:
Considering the time interval for the vi  0 (immediate ly before the collision)
collision, ti and tf , initial speed and
v f  44m / s (immediate ly after the collision)
the final speed are
Therefore the magnitude of the impulse I  D p  mvBf  mvBi
on the ball due to the force of the club is  0  0.05  44  2.2kg  m / s
Wednesday, Oct. 16, 2002
PHYS 1443-003, Fall 2002
Dr. Jaehoon Yu
10
Example 9.4
In a crash test, an automobile of mass 1500kg collides with a wall. The initial and
final velocities of the automobile are vi=-15.0i m/s and vf=2.60i m/s. if the collision
lasts for 0.150 seconds, what would be the impulse caused by the collision and the
average force exerted on the automobile?
Let’s assume that the force involved in the collision is a lot larger than any other
forces in the system during the collision. From the problem, the initial and final
momentum of the automobile before and after the collision is
p i  mvi  1500   15.0i  22500i kg  m / s
p f  mv f  1500  2.60i  3900i kg  m / s
Therefore the impulse on the
I  D p  p  pi  3900  22500 i kg  m / s
automobile due to the collision is
 26400i kg  m / s  2.64 104 i kg  m / s
f
The average force exerted on the
automobile during the collision is
Wednesday, Oct. 16, 2002
2.64 10 4
Dp

F 
0.150
Dt
5
2
5

1
.
76

10
i
kg

m
/
s

1
.
76

10
iN
PHYS 1443-003, Fall 2002
Dr. Jaehoon Yu
11
Collisions
Generalized collisions must cover not only the physical contact but also the collisions
without physical contact such as that of electrostatic ones in a microscopic scale.
Consider a case of a collision
between a proton on a helium ion.
F
F12
t
F21
Using Newton’s
3rd
The collisions of these ions never involves a
physical contact because the electrostatic
repulsive force between these two become great
as they get closer causing a collision.
Assuming no external forces, the force
exerted on particle 1 by particle 2, F21,
changes the momentum of particle 1 is
law we obtain
i
i
ti
D p 2   F 12dt
ti
D p 2  t F 12 dt   t F 21dt  D p1
So the momentum change of the system in the
collision is 0 and the momentum is conserved
Wednesday, Oct. 16, 2002
tf
D p1   F 21dt
tf
Likewise for particle 2 by particle 1
tf
tf
D p  D p1  D p 2  0
p system
PHYS 1443-003, Fall 2002
Dr. Jaehoon Yu
 p1  p 2
 constant
12
Example 9.5
A car of mass 1800kg stopped at a traffic light is rear-ended by a 900kg car, and the
two become entangled. If the lighter car was moving at 20.0m/s before the collision
what is the velocity of the entangled cars after the collision?
The momenta before and after the collision are
Before collision
p i  m1 v1i  m2 v 2i  0  m2 v 2i
m2
20.0m/s
m1
p f  m1 v1 f  m2 v 2 f  m1  m2 v f
After collision
Since momentum of the system must be conserved
m2
vf
m1
vf
What can we learn from these equations
on the direction and magnitude of the
velocity before and after the collision?
Wednesday, Oct. 16, 2002
m1  m2 v f
pi  p f

 m2 v 2i
m2 v 2i
900  20.0i

 6.67i m / s
m1  m2  900  1800
The cars are moving in the same direction as the lighter
car’s original direction to conserve momentum.
The magnitude is inversely proportional to its own mass.
PHYS 1443-003, Fall 2002
Dr. Jaehoon Yu
13
Elastic and Inelastic Collisions
Momentum is conserved in any collisions as long as external forces negligible.
Collisions are classified as elastic or inelastic by the conservation of kinetic
energy before and after the collisions.
Elastic
Collision
A collision in which the total kinetic energy and momentum
are the same before and after the collision.
Inelastic
Collision
A collision in which the total kinetic energy is not the same
before and after the collision, but momentum is.
Two types of inelastic collisions:Perfectly inelastic and inelastic
Perfectly Inelastic: Two objects stick together after the collision
moving at a certain velocity together.
Inelastic: Colliding objects do not stick together after the collision but
some kinetic energy is lost.
Note: Momentum is constant in all collisions but kinetic energy is only in elastic collisions.
Wednesday, Oct. 16, 2002
PHYS 1443-003, Fall 2002
Dr. Jaehoon Yu
14
Elastic and Perfectly Inelastic Collisions
In perfectly Inelastic collisions, the objects stick
together after the collision, moving together.
Momentum is conserved in this collision, so the
final velocity of the stuck system is
m1 v1i  m2 v 2i  (m1  m2 )v f
vf 
m1 v1i  m2 v 2i
(m1  m2 )
m1 v1i  m2 v 2i  m1 v1 f  m2 v 2 f
How about elastic collisions?
1
1
1
1
In elastic collisions, both the
m1v12i  m2 v22i  m1v12f  m2 v22 f
2
2
2
2
momentum and the kinetic energy
m1 v12i  v12f   m2 v22i  v22 f 
are conserved. Therefore, the
final speeds in an elastic collision
m1 v1i  v1 f v1i  v1 f   m2 v2i  v2 f v2i  v2 f 
can be obtained in terms of initial From momentum
m1 v1i  v1 f   m2 v2i  v2 f 
speeds as
conservation above
 m  m2 
 2m2 
v1i  
v2i
v1 f   1
 m1  m2 
 m1  m2 
Wednesday, Oct. 16, 2002
 2m1 
 m  m2 
v1i   1
v2i
v2 f  
 m1  m2 
 m1  m2 
PHYS 1443-003, Fall 2002
Dr. Jaehoon Yu
15
Two dimensional Collisions
In two dimension, one can use components of momentum to apply
momentum conservation to solve physical problems.
m1
m1 v 1i  m2 v 2 i  m1 v1 f  m2 v 2 f
v1i
m2

f
x-comp.
m1v1ix  m2 v2ix  m1v1 fx  m2 v2 fx
y-comp.
m1v1iy  m2 v2iy  m1v1 fy  m2 v2 fy
Consider a system of two particle collisions and scatters in
two dimension as shown in the picture. (This is the case at
fixed target accelerator experiments.) The momentum
conservation tells us:
m1 v 1i  m2 v 2i  m1 v1i
m1v1ix  m1v1 fx  m2 v2 fx  m1v1 f cos   m2 v2 f cos f
m1v1iy  0  m1v1 fy  m2 v2 fy  m1v1 f sin   m2 v2 f sin f
And for the elastic conservation,
the kinetic energy is conserved:
Wednesday, Oct. 16, 2002
1
1
1
m1v 12i  m1v12f  m2 v22 f
2
2
2
PHYS 1443-003, Fall 2002
Dr. Jaehoon Yu
What do you think
we can learn from
these relationships?
16
Example 9.9
Proton #1 with a speed 3.50x105 m/s collides elastically with proton #2 initially at
rest. After the collision, proton #1 moves at an angle of 37o to the horizontal axis and
proton #2 deflects at an angle f to the same axis. Find the final speeds of the two
protons and the scattering angle of proton #2, f.
m1
v1i
m2

Since both the particles are protons m1=m2=mp.
Using momentum conservation, one obtains
x-comp. m p v1i  m p v1 f cos   m p v2 f cos f
y-comp.
f
m p v1 f sin   m p v2 f sin f  0
Canceling mp and put in all known quantities, one obtains
v1 f cos 37  v2 f cos f  3.50 105 (1)
From kinetic energy
conservation:
3.50 10 
5 2
 v v
2
1f
2
2f
Wednesday, Oct. 16, 2002
v1 f sin 37  v2 f sin f
Solving Eqs. 1-3
(3) equations, one gets
(2)
v1 f  2.80 105 m / s
v2 f  2.1110 m / s
5
f  53.0
PHYS 1443-003, Fall 2002
Dr. Jaehoon Yu
Do this at
home
17
Download