21431
28-Jun-16
1 of 5
ROADMARKING
Demonstrate knowledge of
specifications used for complex
roadmarking
level:
3
credit:
10
planned review date:
September 2009
sub-field:
Highway Construction and Maintenance
replacement information:
This unit standard and unit standard 21430 replaced unit
standard 15933.
purpose:
People credited with this unit standard are able to
demonstrate knowledge of specifications used for complex
roadmarking, and refer to documents for details of complex
roadmarking requirements and complete as appropriate.
entry information:
Open.
accreditation option:
Evaluation of documentation and visit by NZQA and industry.
moderation option:
A centrally established and directed national moderation
system has been set up by Infrastructure ITO.
special notes:
1
The requirements within the following legislation and
regulations applying to roadmarking operations must be
complied with as appropriate to the context of
assessment for this unit standard:
Employment Relations Act 2000;
Health and Safety in Employment Act 1992;
Health and Safety in Employment Regulations 1995;
Health and Safety in Employment (Pressure
Equipment, Cranes, and Passenger Ropeways)
Regulations 1999;
Injury Prevention, Rehabilitation, and Compensation
Act 2001;
Resource Management Act 1991;
Traffic Regulations 1976;
all available at http://www.legislation.govt.nz/.
 New Zealand Qualifications Authority 2016
21431
28-Jun-16
2 of 5
ROADMARKING
Demonstrate knowledge of
specifications used for complex
roadmarking
2
The requirements within the following codes of practice
and guidelines applying to roadmarking operations
must be complied with as appropriate to the context of
assessment for this unit standard:
Codes of practice and checklists published by the
New Zealand Roadmarkers Federation, such as Safety,
Health and Environment Guide, available at
http://www.nzrf.co.nz/;
Transit New Zealand’s principal external manuals,
manual amendments, specific examples include:
Code of Practice for Temporary Traffic Management
(CoPTTM),
http://www.transit.govt.nz/technical_information/index.jsp;
Manual of Traffic Signs and Markings, Part II
http://www.transit.govt.nz/technical_information/view_m
anual.jsp?content_type=manual&=edit&primary_key=1
5&action=edit;
Transit New Zealand’s Technical documents TNZ C/01,
TNZ M/07, TNZ M/12, TNZ M/13, TNZ M/20, TNZ P/12,
TNZ P/14, TNZ P/20, TNZ P/22, TNZ T/4, TNZ T/08,
TNZ T/12, TNZ TQS1, TNZ TQS2 are listed on
http://www.transit.govt.nz/technical_information/specific
ations.jsp;
Occupational Safety and Health Service of the
Department of Labour documents including approved
codes of practice and guidelines relevant to specific
work activities an example being the Code of Practice
for the Management of Substances Hazardous to
Health (MOSHH), available at
http://www.osh.govt.nz/order/catalogue/327.shtml.
3
This unit standard could be assessed in both the
workplace or provider environments.
 New Zealand Qualifications Authority 2016
21431
28-Jun-16
3 of 5
ROADMARKING
Demonstrate knowledge of
specifications used for complex
roadmarking
4
Definitions
Company requirements include the policy, procedures,
and methodologies of the company. They include
requirements in company and site health, safety and
environmental plans, quality assurance documents, and
contract work and reporting documents.
Contract specifications include plans, diagrams, and
special technical conditions. They do not include
special administrative conditions.
Complex roadmarking is roadmarking performed by a
team or teams involving multiple marking elements and
involve calculations. Situations include but are not
limited to sections of longitudinal marking lines greater
than 150m, complex intersection markings, median
strips, Raised Pavement Markers (RPMs), airport
markings and sports courts.
Elements and Performance Criteria
element 1
Demonstrate knowledge of specifications used for complex roadmarking.
performance criteria
1.1
The scope and application of marking categories are described in accordance
with the Manual of Traffic Signs and Markings, Part II.
1.2
Specifications for road markings and RPMs are stated in accordance with the
Manual of Traffic Signs and Markings, Part II.
1.3
Specifications for dimensional tolerances, application rates, material diary
entries, traffic management, setting out, preparation of road surface, nonconforming markings, remedial markings, and equipment calibration are stated
in accordance with Transit New Zealand specifications.
 New Zealand Qualifications Authority 2016
21431
28-Jun-16
4 of 5
ROADMARKING
Demonstrate knowledge of
specifications used for complex
roadmarking
element 2
Refer to documents for details of complex roadmarking requirements and complete as
appropriate.
performance criteria
2.1
Manual of Traffic Signs and Markings, Part II, details are identified and
described in terms of complex roadmarking and RPM requirements.
2.2
Transit New Zealand roadmarking documents are referred to and details of
specifications identified and described in terms of complex roadmarking and
RPM requirements.
Range:
2.3
Code of Practice for Temporary Traffic Management, Transit
New Zealand’s Technical documents.
A specification review schedule is completed in accordance with Transit
New Zealand specification TNZ TQS2.
Comments on this unit standard
Please contact Infrastructure ITO askus@infratrain.co.nz if you wish to suggest changes
to the content of this unit standard.
Please Note
Providers must be accredited by the Qualifications Authority or a delegated interinstitutional body before they can register credits from assessment against unit standards
or deliver courses of study leading to that assessment.
Industry Training Organisations must be accredited by the Qualifications Authority before
they can register credits from assessment against unit standards.
Accredited providers and Industry Training Organisations assessing against unit standards
must engage with the moderation system that applies to those standards.
 New Zealand Qualifications Authority 2016
21431
28-Jun-16
5 of 5
ROADMARKING
Demonstrate knowledge of
specifications used for complex
roadmarking
Accreditation requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for providers wishing to
develop education and training programmes, such as minimum qualifications for tutors and
assessors, and special resource requirements.
This unit standard is covered by AMAP 0101 which can be accessed at
http://www.nzqa.govt.nz/site/framework/search.html.
 New Zealand Qualifications Authority 2016