21425
28-Jun-16
1 of 4
ROADMARKING
Set out complex roadmarking work
level:
3
credit:
12
planned review date:
September 2009
sub-field:
Highway Construction and Maintenance
replacement information:
This unit standard and unit standard 21424 replaced unit
standard 15926.
purpose:
People credited with this unit standard are able to describe
set out requirements for complex roadmarking work, and set
out site for complex roadmarking work.
entry information:
Open.
accreditation option:
Evaluation of documentation and visit by NZQA and industry.
moderation option:
A centrally established and directed national moderation
system has been set up by Infrastructure ITO.
special notes:
1
The requirements within the following legislation and
regulations applying to roadmarking operations must be
complied with as appropriate to the context of
assessment for this unit standard:
Employment Relations Act 2000;
Health and Safety in Employment Act 1992;
Health and Safety in Employment Regulations 1995;
Health and Safety in Employment (Pressure
Equipment, Cranes, and Passenger Ropeways)
Regulations 1999;
Injury Prevention, Rehabilitation, and Compensation
Act 2001;
Resource Management Act 1991;
Traffic Regulations 1976;
all available at http://www.legislation.govt.nz/.
 New Zealand Qualifications Authority 2016
21425
28-Jun-16
2 of 4
ROADMARKING
Set out complex roadmarking work
2
The requirements within the following codes of practice
and guidelines applying to roadmarking operations
must be complied with as appropriate to the context of
assessment for this unit standard:
Codes of practice and checklists published by the
New Zealand Roadmarkers Federation, such as Safety,
Health and Environment Guide, available at
http://www.nzrf.co.nz/;
Transit New Zealand’s principal external manuals,
manual amendments, specific examples include:
Code of Practice for Temporary Traffic Management
(CoPTTM),
http://www.transit.govt.nz/technical_information/index.jsp;
Manual of Traffic Signs and Markings, Part II (Transit
New Zealand)
http://www.transit.govt.nz/technical_information/view_m
anual.jsp?content_type=manual&=edit&primary_key=1
5&action=edit;
Transit New Zealand’s Technical documents TNZ C/01,
TNZ M/07, TNZ M/12, TNZ M/13, TNZ M/20, TNZ P/12,
TNZ P/14, TNZ P/20, TNZ P/22, TNZ T/4, TNZ T/08,
TNZ T/12, TNZ TQS1, TNZ TQS2 are listed on
http://www.transit.govt.nz/technical_information/specific
ations.jsp;
Occupational Safety and Health Service of the
Department of Labour documents including approved
codes of practice and guidelines relevant to specific
work activities an example being the Code of Practice
for the Management of Substances Hazardous to
Health (MOSHH), available at
http://www.osh.govt.nz/order/catalogue/327.shtml.
3
The requirements within the following New Zealand
Standards applying to roadmarking operations must be
complied with as appropriate to the context of
assessment for this unit standard:
NZS 3910:2003: Conditions of contract for building and
civil engineering construction;
NZS 3915:2000: Conditions of contract for building and
civil engineering construction (where no person is
appointed to act as engineer to the contract)
http://www.standards.co.nz/.
4
This unit standard should be assessed in a workplace
context.
 New Zealand Qualifications Authority 2016
21425
28-Jun-16
3 of 4
ROADMARKING
Set out complex roadmarking work
5
Definitions
Company requirements include the policy, procedures,
and methodologies of the company. They include
requirements in company and site health, safety and
environmental plans, quality assurance documents, job
plan, and contract work and reporting documents.
Contract specifications may include plans, diagrams,
requirements, and special technical conditions. They
do not include special administrative conditions.
Complex set-out requirements are those which may be
performed by a team or teams involving multiple
marking elements and involve calculations. Situations
include but are not limited to sections of longitudinal
marking lines greater than 150m, complex intersection
markings, median strips, Raised Pavement Markers,
airport markings and sports courts.
Road Controlling Authority (RCA) in relation to a road,
means the Minister, Department of State, Crown entity,
State enterprise, or territorial authority that controls the
road.
Elements and Performance Criteria
element 1
Describe set-out requirements for complex roadmarking work.
performance criteria
1.1
Complex set-out requirements are described in accordance with road controlling
authority specifications.
1.2
Complex set-out requirements are described in terms of the Manual of Traffic
Signs and Markings, Part II.
1.3
Complex set-out requirements are described in terms of contract specifications.
1.4
Acceptability levels of set-out requirements are described in terms of company
requirements and Road Controlling Authority specifications.
1.5
Roadmarking maps and plans are interpreted in terms of scale and symbols.
 New Zealand Qualifications Authority 2016
21425
28-Jun-16
4 of 4
ROADMARKING
Set out complex roadmarking work
element 2
Set out site for complex roadmarking work.
Range:
three complex situations.
performance criteria
2.1
Job requirements are confirmed in accordance with contract specifications.
2.2
Instructions are relayed to operations crew in accordance with contract
specifications and company requirements.
2.3
Site is set out in accordance with contract specifications.
2.4
Layout is approved in accordance with contract specifications and client’s
requirements.
Comments on this unit standard
Please contact Infrastructure ITO askus@infratrain.co.nz if you wish to suggest changes
to the content of this unit standard.
Please Note
Providers must be accredited by the Qualifications Authority or a delegated interinstitutional body before they can register credits from assessment against unit standards
or deliver courses of study leading to that assessment.
Industry Training Organisations must be accredited by the Qualifications Authority before
they can register credits from assessment against unit standards.
Accredited providers and Industry Training Organisations assessing against unit standards
must engage with the moderation system that applies to those standards.
Accreditation requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for providers wishing to
develop education and training programmes, such as minimum qualifications for tutors and
assessors, and special resource requirements.
This unit standard is covered by AMAP 0101 which can be accessed at
http://www.nzqa.govt.nz/site/framework/search.html.
 New Zealand Qualifications Authority 2016