8116 version 4
28-Jun-16
1 of 3
LEATHER - BOTTOM STOCK, MAKING
AND LASTING
Attach steel toe caps to industrial
footwear
level:
2
credit:
3
planned review date:
November 2005
sub-field:
Footwear and Leather Trades
purpose:
People credited with this unit standard are able to check
components prior to attaching steel toe caps, and attach
steel toe cap to industrial footwear and apply comfort strip.
entry information:
Open.
accreditation option:
Evaluation of documentation by NZQA and industry.
moderation option:
A centrally established and directed national moderation
system has been set up by Competenz.
special notes:
1
Specified industry performance is 55% BSI
performance or equivalent. BSI Performance is the
British Standards Institute internationally recognised
performance system (BS3138) where 100% is the
standard expected from a competent fully qualified
performer using the correct methods and taking the
allowed rest. Other comparable rating or performance
systems such as the 60/80 system are acceptable, with
the appropriate performance adjustment.
2
Company safety requirements must conform to the
Health and Safety in Employment Act 1992 and Health
and Safety in Employment Regulations 1995.
8116 version 4
28-Jun-16
2 of 3
LEATHER - BOTTOM STOCK, MAKING
AND LASTING
Attach steel toe caps to industrial
footwear
Elements and Performance Criteria
element 1
Check components prior to attaching steel toe caps.
performance criteria
1.1
Received toe caps are checked against, and match, work ticket requirements
and/or company standard.
Range:
1.2
Uppers are checked against, and match, work ticket requirements and/or
company standards.
Range:
1.3
size, style, number, not distorted, no rust, no sharp edges.
unlasted – size, style, number;
lasted upper lining – size, style, number, flat bottom, smooth
lining.
Comfort strips are checked against, and match work ticket requirements and/or
company standard.
Range:
size, type, not distorted.
element 2
Attach steel toe cap to industrial footwear and apply comfort strip.
performance criteria
2.1
Work is completed to specified industry performance standard.
2.2
Work is completed to company quality standard.
Range:
toe cap tight on last, insole without creases, comfort strip even to
edge of cap, comfort strip firmly trapped and/or stuck down.
2.3
Documentation is completed to company requirements and practice.
2.4
Work practices meet company safety requirements.
8116 version 4
28-Jun-16
3 of 3
LEATHER - BOTTOM STOCK, MAKING
AND LASTING
Attach steel toe caps to industrial
footwear
Comments on this unit standard
Please contact Competenz info@competenz.org.nz if you wish to suggest changes to the
content of this unit standard.
Please Note
Providers must be accredited by the Qualifications Authority or a delegated interinstitutional body before they can register credits from assessment against unit standards
or deliver courses of study leading to that assessment.
Industry Training Organisations must be accredited by the Qualifications Authority before
they can register credits from assessment against unit standards.
Accredited providers and Industry Training Organisations assessing against unit
standards must engage with the moderation system that applies to those standards.
Accreditation requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for providers wishing to
develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
This unit standard is covered by AMAP 0030 which can be accessed at
http://www.nzqa.govt.nz/framework/search/index.do.