NZQA Expiring unit standard
27866 version 2
Page 1 of 4
Title
Demonstrate introductory skills to maintain aircraft reciprocating
powerplants
Level
3
Credits
15
Purpose
People credited with this unit standard are able to, under
supervision: prepare to maintain aircraft reciprocating
powerplants; locate defects in aircraft reciprocating
powerplants; restore airworthiness of aircraft reciprocating
powerplants; and complete finishing activities related to
maintaining aircraft reciprocating powerplants.
Classification
Aeronautical Engineering > Aircraft Powerplant Maintenance
Available grade
Achieved
Explanatory notes
1
All tasks are to be carried out in accordance with enterprise procedures, the enterprise
the organisation carrying out the work. Enterprise procedures referred to in this unit
standard are the applicable procedures found in the following: enterprise exposition;
manufacturer publications; Government and local body legislation; airworthiness
authority requirements.
2
This unit standard excludes engine running and testing.
3
The scope of the system that this unit standard relates to is described in ATA iSpec
2200, chapter 72(R).
4
This unit standard may be assessed against either on or off job in a real or simulated
aeronautical engineering environment.
5
The supervision requirement is additional to normal supervisory requirements of the
aviation industry, to enable the graduate to operate safely until they meet full
workplace competency.
Outcomes and evidence requirements
Outcome 1
Prepare to maintain aircraft reciprocating powerplants under supervision.
Evidence requirements
1.1
Task is determined by reviewing maintenance documentation.
ServiceIQ
SSB Code 9068
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
1.2
27866 version 2
Page 2 of 4
Resources are obtained and checked for serviceability in accordance with
enterprise procedures.
Range
publications, tools, equipment, safety equipment, spare parts,
materials.
1.3
Aircraft registration and powerplant to be maintained are matched with
documentation.
1.4
Aircraft and powerplant are prepared for the application of power and operation
in accordance with enterprise procedures.
Range
1.5
may include but is not limited to – cockpit controls match
component positions, clearances, isolation tags, warning signs,
other systems ready for the application of power, other personnel
warned of power being applied, permission obtained to apply
power.
Ground and/or support equipment is positioned ready for powerplant
maintenance in accordance with enterprise procedures.
Outcome 2
Locate defects in aircraft reciprocating powerplants under supervision.
Evidence requirements
2.1
Serviceability is determined in accordance with enterprise procedures.
Range
2.2
inspect, assess, test.
Defects are reported and documented in accordance with enterprise
procedures.
Outcome 3
Restore airworthiness of aircraft reciprocating powerplants under supervision.
Evidence requirements
3.1
Methods of rectifying defects are determined in accordance with enterprise
procedures.
3.2
Replacement parts are procured and verified as authentic and serviceable in
accordance with enterprise procedures.
Range
3.3
identify, inspect.
Defects are rectified in accordance with enterprise procedures.
Range
ServiceIQ
SSB Code 9068
may include but is not limited to – repair, replace, modify, adjust,
calibrate, lubricate.
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
27866 version 2
Page 3 of 4
3.4
Powerplants are assessed to verify serviceability, in accordance with enterprise
procedures.
3.5
Servicing activities required as a consequence of the maintenance activity are
completed in accordance with enterprise procedures.
3.6
Inspections are obtained in accordance with enterprise procedures.
Outcome 4
Complete finishing activities related to maintaining aircraft reciprocating powerplants under
supervision.
Evidence requirements
4.1
Completion activities specific to the task and work area are carried out in
accordance with enterprise procedures.
activities may include but are not limited to – tool control,
cleanliness, tidiness, return of publications, systems and aircraft
left ready for next activity.
Range
4.2
Resources are checked for serviceability and returned to service or storage in
accordance with enterprise procedures.
Range
4.3
tools, equipment, safety equipment.
Leftover parts and materials are disposed of in accordance with enterprise
procedures.
Range
4.4
serviceable, unserviceable, surplus, waste, scrap, hazardous.
Documentation is completed in accordance with enterprise procedures.
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
18 October 2012
31 December 2018
Review
2
17 July 2014
31 December 2018
Consent and Moderation Requirements (CMR) reference
0028
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
ServiceIQ
SSB Code 9068
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
27866 version 2
Page 4 of 4
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
ServiceIQ
SSB Code 9068
 New Zealand Qualifications Authority 2016