NZQA registered unit standard 23071 version 2 Page 1 of 3 Title Demonstrate knowledge of mould equipment for glass container production Level 2 Credits 2 Purpose People credited with this unit standard are able to demonstrate knowledge of mould equipment for glass container production. Classification Glass and Glazing > Glass Container Manufacturing Available grade Achieved Entry information Critical health and safety prerequisites Open. Explanatory notes Definition Enterprise means an organisation where assessment is taking place, and/or where the trainee is employed. Enterprise procedures refer to the documented procedures used by the organisation carrying out the work and applicable to the tasks being carried out. They may include but are not limited to – standard operating procedures, site safety procedures, equipment operating procedures, codes of practice, quality assurance procedures, housekeeping standards, charging of time and materials, management of drawings and documentation, procedures to comply with legislative and local body requirements. Outcomes and evidence requirements Outcome 1 Demonstrate knowledge of mould equipment for glass container production. Evidence requirements 1.1 The components of both sides of a mould set are identified, and their placement on the machine described in accordance with enterprise procedures. Range Competenz SSB Code 101571 components of the blank side – blank mould, thimble, cooling tube for plunger, plunger, set-up blank, neck ring, guide plate, cup funnel, baffle; New Zealand Qualifications Authority 2016 NZQA registered unit standard 23071 version 2 Page 2 of 3 components of the mould side - mould, mould bottom plate, blow head, take out grips, vertiflow plate. 1.2 Mould ancillary equipment is identified in accordance with enterprise procedures. mould ancillary equipment – hinges, neck ring arms, funnel arms, delivery gear. Range 1.3 The functions of mould set components and ancillary equipment are described in accordance with enterprise procedures. 1.4 The glass container mould production process is described in accordance with enterprise procedures. production process – bottle concept and design, prototyping, mould design, customer approval, trial mould construction, trial production, production mould set manufacture. Range Planned review date 31 December 2019 Status information and last date for assessment for superseded versions Process Version Date Last Date for Assessment Registration 1 20 November 2006 31 December 2017 Review 2 16 April 2015 N/A Consent and Moderation Requirements (CMR) reference 0134 This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do. Please note Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment. Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards. Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards. Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMRs). The CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements. Competenz SSB Code 101571 New Zealand Qualifications Authority 2016 NZQA registered unit standard 23071 version 2 Page 3 of 3 Comments on this unit standard Please contact Competenz qualifications@competenz.org.nz if you wish to suggest changes to the content of this unit standard. Competenz SSB Code 101571 New Zealand Qualifications Authority 2016