25784 version 1
Page 1 of 4
Carry out a hut inspection
Level
4
Credits
4
Purpose
People credited with this unit standard are able to carry out pre-inspection
processes and planning for inspecting a hut, carry out a hut inspection, and
carry out post-inspection processes.
Subfield
Environment
Domain
Conservation
Status
Registered
Status date
22 May 2009
Date version published
22 May 2009
Planned review date
31 December 2012
Entry information
Open.
Accreditation
Evaluation of documentation and visit by NZQA and
industry.
Standard setting body (SSB)
The Skills Organisation
Accreditation and Moderation Action Plan (AMAP) reference
0121
This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Special notes
1
All activities must comply with the policies, procedures, and requirements of the
organisations involved; the ethical codes and standards of relevant professional
bodies; and any relevant cultural, legislative and/or regulatory requirements.
2
Legislation relevant to this unit standard may include but is not limited to: Building Act
2004, Conservation Act 1987, Hazardous Substances and New Organisms Act 1996
(HSNO Act), Health and Safety in Employment Act 1992, Local Government Act
2002, Public Works Act 1981, Reserves Act 1977, Resource Management Act 1991,
Treaty of Waitangi Act 1975.
 New Zealand Qualifications Authority 2016
25784 version 1
Page 2 of 4
3
Definitions
Associated assets may include but are not limited to – warden’s quarters, toilets,
sheds, bunkrooms, signs.
Huts are buildings under the management of the Department of Conservation,
Territorial Authorities or the Regional Council and include: visitor huts open to the
public, and backcountry biodiversity huts including flyable huts and bivvies.
Hut components may include but are not limited to – the area outside the hut and
associated buildings, waste management system, vegetation, foundations, exterior
claddings, water supply, flooring and decking, walls, roofs, interior fixtures, cooking
appliances, heating, LPG installations, fire safety equipment, electrical fittings,
lighting, radios, furniture, visitor information, natural hazards.
Organisational requirements include the documented policy, procedures, and
methodologies of the organisation. They include requirements documented in
organisation and site health and safety plans, quality assurance documents, and
contract work programmes.
Elements and performance criteria
Element 1
Carry out pre-inspection processes and planning for inspecting a hut.
Performance criteria
1.1
The hut and its associated assets are identified as due for inspection using
organisational information.
Range
1.2
information includes but is not limited to – hut type, assets
associated with the hut, location of huts.
Resources and equipment required to carry out the inspection are collected and
checked in accordance with organisational requirements.
Range
equipment and resources may include but are not limited to –
materials, tools, recording equipment, documents, inspection
schedule, safety equipment.
Element 2
Carry out a hut inspection.
Performance criteria
2.1
Hut identified as due for inspection is physically located using organisational
information.
2.2
Hut, hut components and associated assets are inspected and their condition is
recorded in accordance with organisational requirements.
2.3
Any defects are identified and recorded in accordance with organisational
requirements.
 New Zealand Qualifications Authority 2016
25784 version 1
Page 3 of 4
2.4
Minor defects are repaired in accordance with organisational requirements.
2.5
Where major defects are identified measures are taken to ensure public safety
in accordance with organisational requirements.
Range
measures may include but are not limited to – posting signage,
posting hazard tape, safety notices, changing hut status to closed.
2.6
The hut, hut components and associated assets are photographed and/or
sketched, where applicable, in accordance with organisational requirements.
2.7
Inspection of hut, hut components and associated assets is carried out safely in
accordance with organisational requirements.
Element 3
Carry out post-inspection processes.
Performance criteria
3.1
Inspection information is transferred and recorded in accordance with
organisational requirements.
3.2
Photographs and/or sketches are processed, where applicable, in accordance
with organisational requirements.
3.3
Major defects and hazards identified during inspection are reported to the
appropriate personnel in accordance with organisational requirements.
Range
appropriate personnel may include but are not limited to –
managers, engineers, specialist inspectors, tradespersons.
Please note
Providers must be accredited by NZQA, or an inter-institutional body with delegated
authority for quality assurance, before they can report credits from assessment against
unit standards or deliver courses of study leading to that assessment.
Industry Training Organisations must be accredited by NZQA before they can register
credits from assessment against unit standards.
Accredited providers and Industry Training Organisations assessing against unit standards
must engage with the moderation system that applies to those standards.
Accreditation requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for organisations
wishing to develop education and training programmes, such as minimum qualifications for
tutors and assessors, and special resource requirements.
 New Zealand Qualifications Authority 2016
25784 version 1
Page 4 of 4
Comments on this unit standard
Please contact The Skills Organisation info@skills.org.nz if you wish to suggest changes
to the content of this unit standard.
 New Zealand Qualifications Authority 2016