Demonstrate knowledge of testing heavy vehicle or machine electrical

advertisement
24125 version 1
Page 1 of 3
Demonstrate knowledge of testing heavy vehicle or machine electrical
starting and charging systems
Level
4
Credits
2
Purpose
This theory-based unit standard is for people in the automotive heavy and
electrical repair industries. People credited with this unit standard are able to
demonstrate knowledge of testing heavy vehicle or machine electrical
starting and charging systems.
Subfield
Motor Industry
Domain
Automotive Electrical and Electronics
Status
Registered
Status date
25 January 2008
Date version published
25 January 2008
Planned review date
31 December 2012
Entry information
Open.
Replacement information
This unit standard and unit standard 24126 replaced unit
standard 3396.
Accreditation
Evaluation of documentation and visit by NZQA and
industry.
Standard setting body (SSB)
NZ Motor Industry Training Organisation (Incorporated)
Accreditation and Moderation Action Plan (AMAP) reference
0014
This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Special notes
1
Legislation relevant to this unit standard includes but is not limited to – Health and
Safety in Employment Act 1992.
2
Definitions
Heavy vehicle refers to a motor vehicle that is of Class MD3, MD4, ME, NB, NC, TC
or TD; or has a gross vehicle mass that exceeds 3500 kg and is not of a class
specified in the Table of vehicle classes as listed from Land Transport New Zealand
website http://www.landtransport.govt.nz/publications/infosheets/infosheet-110.html#classes.
 New Zealand Qualifications Authority 2016
24125 version 1
Page 2 of 3
Service information may include but is not limited to – technical information of a
vehicle, machine, or product detailing operation; installation and servicing
procedures; manufacturer instructions and specifications; technical terms and
descriptions; and detailed illustrations. This can be accessed in hard copy or
electronic format and is normally sourced from the manufacturer.
Elements and performance criteria
Element 1
Demonstrate knowledge of testing heavy vehicle or machine electrical starting and
charging systems.
Performance criteria
1.1
Safety precautions to be observed when carrying out starting and charging tests
on vehicles and machines are described in accordance with tool and component
service information and legislative requirements.
Range
personal safety, safety of others, vehicle or machine safety,
workshop safety, environmental safety, tools and equipment
safety, handling 12 and 24 volt supply, test equipment safety.
1.2
Starting and charging faults and their causes are described in accordance with
service information.
1.3
External factors affecting starter operation are described in accordance with
service information.
1.4
External factors affecting charging operation are described in accordance with
service information.
1.5
Test equipment application and compatibility to vehicle or machine starting and
charging systems are described in accordance with test instrument
specifications.
1.6
Starter test procedures on a vehicle or machine are described in accordance
with service information.
Range
1.7
includes but is not limited to – series system, parallel system;
solenoid, relays, switches, cables, connectors.
Charger test procedures on a vehicle or machine are described in accordance
with service information.
Range
includes but is not limited to – series system, parallel system;
connectors, wires, internal regulator, warning lamp, relay.
 New Zealand Qualifications Authority 2016
24125 version 1
Page 3 of 3
Please note
Providers must be accredited by NZQA, or an inter-institutional body with delegated
authority for quality assurance, before they can report credits from assessment against
unit standards or deliver courses of study leading to that assessment.
Industry Training Organisations must be accredited by NZQA before they can register
credits from assessment against unit standards.
Accredited providers and Industry Training Organisations assessing against unit standards
must engage with the moderation system that applies to those standards.
Accreditation requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for organisations
wishing to develop education and training programmes, such as minimum qualifications for
tutors and assessors, and special resource requirements.
Comments on this unit standard
Please contact the NZ Motor Industry Training Organisation (Incorporated)
info@mito.org.nz if you wish to suggest changes to the content of this unit standard.
 New Zealand Qualifications Authority 2016
Download