NZQA registered unit standard
19995 version 4
Page 1 of 4
Title
Carry out a Fritz continuous buttermaking process in a dairy
processing operation
Level
4
Purpose
Credits
5
This unit standard is for people carrying out milk product
processing in a dairy processing operation.
People credited with this unit standard are able to: demonstrate
knowledge of the Fritz continuous buttermaking process;
prepare Fritz continuous buttermaking equipment for operation;
and operate and monitor Fritz continuous buttermaking
equipment, in a dairy processing operation.
Classification
Dairy Processing > Milk Products
Available grade
Achieved
Explanatory notes
1
Legislation relevant to this unit standard includes but is not limited to the Animal
Products Act 1999, Health and Safety in Employment Act 1992, and Animal Products
(Dairy) Regulations 2005.
2
Definitions
Control points – those key points in a work process which must be monitored and
controlled. This includes food safety (critical) quality and regulatory control points as
well as inspection points.
Fritz continuous buttermaking equipment – butter churn, augers, separator, salter,
and vacuum systems.
Materials – pasteurised cream and salt.
Monitoring the process – the use of production data such as performance control
charts.
Organisational requirements – Organisational requirements – instructions to staff on
policies and procedures which are documented in memo, electronic or manual format
and are available in the workplace. These requirements include but are not limited to
– site specific requirements, and company quality management requirements.
Workplace information – Standard Operating Procedures (SOPs), specifications and
production schedules.
3
This unit standard must be assessed in a workplace environment. The candidate
must be under realistic time pressures and use relevant commercial equipment.
Primary Industry Training Organisation
SSB Code 101558
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
19995 version 4
Page 2 of 4
Outcomes and evidence requirements
Outcome 1
Demonstrate knowledge of the Fritz continuous buttermaking process in a dairy
processing operation.
Evidence requirements
1.1
Cleaning and sanitation requirements and procedures for a Fritz continuous
buttermaking process are outlined in terms of organisational requirements
1.2
Components of a Fritz continuous buttermaker are identified and described in
terms of the functions and basic operating principles.
Range
evidence is required of three components.
1.3
The effect of the quality, composition and physical characteristics of raw
materials is identified and explained in terms of process outcomes.
1.4
The Fritz continuous buttermaking process is explained in terms of basic
principles.
1.5
The main buttermaking controls and quality control points are identified and
outlined in terms of their effect on the quality of the product.
Range
1.6
controls and control points may include but are not limited to –
procedures, operating parameters, equipment and instrumentation
components, materials and services;
effects may include but are not limited to – physical quality,
functional quality, microbiological quality, consistency of quality;
evidence is required of three controls and three effects.
Critical control points (CCPs), if relevant, are explained in terms of key
operating parameters, monitoring and operational checks.
Outcome 2
Prepare Fritz continuous buttermaking equipment for operation in a dairy processing
operation.
Evidence requirements
2.1
Workplace information is accessed to identify production requirements for
buttermaking.
2.2
Materials and services necessary to the buttermaking process are confirmed
and available to meet production requirements.
2.3
Buttermaking equipment is checked in terms of status, condition and readiness
for use.
Primary Industry Training Organisation
SSB Code 101558
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
19995 version 4
Page 3 of 4
Outcome 3
Operate and monitor Fitz continuous buttermaking equipment in a dairy processing
operation.
Evidence requirements
3.1
Buttermaking equipment is started up in accordance with organisational
requirements.
3.2
Buttermaking equipment, product and control points are monitored to confirm
that they meet production requirements.
monitoring may include but is not limited to – monitoring control
points and parameters, adjusting operating parameters, plant
checks, identifying sampling and testing requirements, taking
samples, handling samples, dispatch of samples, conducting tests.
Range
3.3
Any out-of-specification product, process and equipment performance is
identified, rectified and/or reported in accordance with organisational
requirements.
3.4
Buttermaking equipment is cleaned and sanitised in accordance with
organisational requirements.
3.5
Waste is collected, treated and disposed of or stored for recycling in
accordance with organisational requirements.
3.6
Workplace information is recorded in accordance with organisational
requirements.
3.7
Buttermaking equipment is shut down in accordance with organisational
requirements.
shutdown includes but is not limited to – putting plant on standby,
routine, emergency situation.
Range
Planned review date
31 December 2020
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
30 June 2003
31 December 2013
Rollover and
Revision
2
25 September 2006
31 December 2014
Rollover
3
17 July 2009
31December 2016
Review
4
18 June 2015
N/A
Primary Industry Training Organisation
SSB Code 101558
 New Zealand Qualifications Authority 2016
NZQA registered unit standard
19995 version 4
Page 4 of 4
Consent and Moderation Requirements (CMR) reference
0022
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
Comments on this unit standard
Please contact the Primary Industry Training Organisation standards@primaryito.ac.nz if
you wish to suggest changes to the content of this unit standard.
Primary Industry Training Organisation
SSB Code 101558
 New Zealand Qualifications Authority 2016