University of technology____________ Fluid Flow __________________ Dr. Asawer A. Alwasity Tutorial Sheet No. 3 Q1) Water and oil in horizontal pipelines. A double U-Tube manometer is connected between the pipelines as shown in figure. Calculate the pressure difference between the water pipe and oil pipe. (sp.gr for liquid and oil are 1.6 and 0.9 respectivelly) Q2) The system in Fig. is at 20°C. If atmospheric pressure is 101.33 kPa and the pressure at the bottom of the tank is 242 kPa, what is the specific gravity of fluid X? Q3) a-What is the pressure of oil shown in figure if the pressure in the water pip? b- If the pressure increased to 15.5 kPa, while the pressure in the oil pipe remain constant. What will be the new manometer reading? Q4) For the tank shown in the figure, determine the reading of pressure gage if h=10cm and H=2m. Q5) A mercury U-tube manometer is used to measure the pressure drop across an orifice in pipe. If the liquid that flowing through the orifice is brine of sp.gr. 1.26 and upstream pressure is 2 psig and the downstream pressure is (10 in Hg) vacuum, find the reading of manometer. 1