NZQF NQ Ref Version 0466 Page 1 of 8 5 National Certificate in Pavement Surfacing (Asphalt Production) (Level 4) Level 4 Credits 136 This qualification is expiring. The last date to meet the requirements is 31 December 2018. Transition Arrangements This qualification has been reviewed and replaced by the New Zealand Certificate in Bituminous Surfacing Construction (Level 4) with strands in Bituminous Mixes, Chipseal, and Slurry [Ref: 2686] and the New Zealand Certificate in Bituminous Product Manufacturing (Level 4) with strands in Binder Manufacturing Operation, Bituminous Mixes Operation, and Bitumen Spraying Operation [Ref: 2687]. The last date for entry into training programmes for the replaced qualification is 31 December 2015. The last date of assessment for the replaced qualification is 31 December 2018. People currently working towards achievement of this qualification may either complete the requirements for that qualification or transfer their results to the replacement. However there are substantial differences between the new and the replaced qualifications, and it is recommended that candidates complete the qualification in which they are enrolled. For detailed information see Review Summaries on the NZQA website. This qualification contains standards that replace or are used as substitutes for earlier standards. For the purposes of this qualification people who have gained credit for the expiring standards are exempt from the requirement to gain credit for the replacement or substitute standards – see table below. Credit for Exempt from 1495 20456 1496 20450 1500 20444 1501 20443 Please note in addition to the above exemption for standard 1495, people transferring from the replaced qualification will be required to gain credit for standard 20449, and those holding credit for 13512 will be required to gain credit for standard 20445. Reverse transition Infrastructure ITO SSB Code 101813 MoE Code 8136 New Zealand Qualifications Authority 2016 NZQF NQ Ref Version 0466 Page 2 of 8 5 For the purpose of version 5 of this qualification, people who have gained credit for the replacement standards are exempt from the requirement to gain credit for the expiring standards – see table below. Credit for Exempt from 26551, 26552 6400, 6401, 6402 Any person who feels disadvantaged by these transition arrangements should contact Infrastructure ITO at the address below. NZQF National Qualification Registration Information Process Registration Revision Review Review Review Version 1 2 3 4 5 Date May 1998 February 2000 September 2001 September 2008 February 2015 Last Date for Assessment December 2002 December 2002 December 2012 December 2018 December 2018 Standard Setting Body Infrastructure ITO PO Box 2759 Wellington 6140 Telephone Email Website 0800 486 626 qualifications@connexis.org.nz http://connexis.org.nz/ Infrastructure ITO SSB Code 101813 MoE Code 8136 New Zealand Qualifications Authority 2016 NZQF NQ Ref Version 0466 5 Page 3 of 8 National Certificate in Pavement Surfacing (Asphalt Production) (Level 4) Level 4 Credits 136 Purpose This national certificate is designed for experienced people responsible for operations at a batch mix or a drum mix asphalt production plant. The holder of the qualification is able to operate the plant, unsupervised. The compulsory section recognises knowledge of asphalt production plants, materials used in hot mix asphalt production, safe procedures for handling, transferring, and modifying bituminous materials; and competence in first aid, emergency control, planning a confined space entry, and operating an asphalt production plant. This qualification contains an optional standard that is not required for completion of the certificate. However, it may be necessary in some workplaces. This qualification shares some standards with the National Certificate in Pavement Surfacing (Bulk Bitumen Equipment) with strands in Gangbar Sprayer, Handbar Sprayer, and Tank Wagon [Ref: 1427], the National Certificate in Pavement Surfacing (Single Site Supervision) (Level 4) with strands in Asphalt, and Chipseal, and an optional strand in Temporary Traffic Management [Ref: 1430], and the National Certificate in Pavement Surfacing (Hot Mix Asphalt Design) (Level 5) [Ref: 0467]. Special Notes Award of this qualification may be used as evidence of competence for operators of asphalt production plants registered under the Roading New Zealand Asphalt Plant Accreditation Scheme. Roading New Zealand also recommends this qualification for people who operate unaccredited asphalt production plants. Credit Range Level 1 credits Level 2 credits Level 3 credits Level 4 credits Total Infrastructure ITO SSB Code 101813 MoE Code 8136 1 2 38 95 136 New Zealand Qualifications Authority 2016 NZQF NQ Ref 0466 Version Page 4 of 8 5 Requirements for Award of Qualification Award of NQF Qualifications Credit gained for a standard may be used only once to meet the requirements of this qualification. Unit standards and achievement standards that are equivalent in outcome are mutually exclusive for the purpose of award. The table of mutually exclusive standards is provided in section 7 of the New Zealand Qualifications Authority (NZQA) Rules and Procedures publications available at http://www.nzqa.govt.nz/ncea/acrp/index.html. Reviewed standards that continue to recognise the same overall outcome are registered as new versions and retain their identification number (ID). Any version of a standard with the same Id may be used to meet qualification requirements that list the ID and/or that specify the past or current classification of the standard. Summary of Requirements Compulsory standards Detailed Requirements Compulsory The following standards are required Engineering and Technology > Civil Works and Services > Civil Infrastructure Health, Safety, and Environment ID Title Level Credit 20867 20868 20872 20876 Respond to fire incidents at a civil infrastructure worksite Demonstrate knowledge of emergency response in the civil infrastructure industry Take control of an emergency at a civil infrastructure worksite Conduct and document civil infrastructure worksite health and safety meetings 3 4 3 4 4 6 4 2 Engineering and Technology > Pavement Surfacing > Asphalt Surfacing ID Title Level 1509 Credit 4 10 4 5 4 12 20444 Demonstrate knowledge of materials used in asphalt production and construction Demonstrate knowledge of the use of polymer modifiers in hot mix asphalt production and construction Operate bitumen storage and heating equipment at an asphalt plant Operate an asphalt production plant 4 25 20445 Demonstrate knowledge of asphalt production plants 4 10 17672 20443 Infrastructure ITO SSB Code 101813 MoE Code 8136 New Zealand Qualifications Authority 2016 NZQF NQ Ref 0466 Version Page 5 of 8 5 Engineering and Technology > Pavement Surfacing > Bitumen Surfacing ID Title Level 20449 20450 20456 Demonstrate knowledge of the dangers of handling bituminous materials and the need for safety Describe safe heating, blending, modification, and transfer of bulk bituminous liquids Demonstrate first aid relating to liquid bitumen and bitumen additives Health > Health Studies > Core Health ID Title Credit 3 20 4 20 2 1 Level Credit 6400 Manage first aid in emergency situations 3 2 6401 Provide first aid 2 1 6402 Provide resuscitation level 2 1 1 Health > Occupational Health and Safety > Occupational Health and Safety Practice ID Title Level Credit 17599 Plan a confined space entry 4 5 17602 Apply hazard identification and risk assessment procedures in the workplace Demonstrate knowledge of hazards associated with confined space 3 4 3 4 18426 Optional standard The following standard is optional Engineering and Technology > Civil Plant Operation and Management > Civil Plant Operation ID Title Level Credit 16158 Operate wheeled loader in asphalt production, pavement surfacing, or extractive industry environment 3 12 Transition Arrangements Version 4 Version 4 of this qualification was issued following a planned review taking account of changes to classifications and a review of standards in the Pavement Surfacing subfield, and the registration of standards in the Civil Infrastructure Health, Safety and Environment domain. Infrastructure ITO SSB Code 101813 MoE Code 8136 New Zealand Qualifications Authority 2016 NZQF NQ Ref 0466 Version Page 6 of 8 5 Changes to structure and content descriptor simplified and strand removed from title special note added to advise of industry requirements titles and credits of reviewed standards updated standards 17599, 17602, 18426, 20450, 20456, 20867, 20868, 20872, and 20876 added to compulsory section standard 17672 moved from optional strand in Polymers to compulsory section, and optional strand in Polymers removed from the qualification standard 16158 moved from compulsory section and made optional to eliminate restrictions on achievement of the qualification expiring standards 1495, 1500, 1501, 13512 and 13516, and standards 1510, 13515, and 13521, not included in the qualification – see exemptions below (where applicable) credit total changed from 107 or 152, to 136. For detailed information see Review Summaries on the NZQA website. It is not intended that anyone is disadvantaged by this review, and the above arrangements have been designed for a smooth transition. However, anyone who feels they have been disadvantaged may appeal to InfraTrain New Zealand at the address below. Previous versions of the qualification Version 3 was issued to: remove the elective section; add a new optional strand; and update the title, standard setting bodies, prerequisite diagram, and reviewed standards. Version 2 was issued to replace standards and add an elective section. Other standard setting bodies whose standards are included in the qualification New Zealand Industry Training Organisation NZQA Certification This certificate will display the logos of NZQA, InfraTrain New Zealand and the accredited organisation. Infrastructure ITO SSB Code 101813 MoE Code 8136 New Zealand Qualifications Authority 2016 NZQF NQ Ref 0466 Version Page 7 of 8 5 Classification This qualification is classified according to the NQF classification system and the New Zealand Standard Classification of Education (NZSCED) system as specified below. DAS Classification NZSCED Code Description Code Description 308 Engineering and Technology > Pavement Surfacing 030910 Engineering and Related Technologies > Civil Engineering > Road Construction Quality Management Systems Providers and Industry Training Organisations must be accredited by a recognised Quality Assurance Body before they can register credits from assessment against standards. Accredited providers and Industry Training Organisations assessing against standards must engage with the moderation system that applies to those standards. Accreditation requirements and the moderation system are outlined in the associated Accreditation and Moderation Action Plan (AMAP) for each standard. Infrastructure ITO SSB Code 101813 MoE Code 8136 New Zealand Qualifications Authority 2016 NZQF NQ Ref 0466 Version 5 Page 8 of 8 Prerequisite Diagram Infrastructure ITO SSB Code 101813 MoE Code 8136 New Zealand Qualifications Authority 2016