Test properties of a composite laminate

advertisement
3196 version 5
Page 1 of 3
Test properties of a composite laminate
Level
4
Credits
10
Purpose
People credited with this unit standard are able to test properties of a
laminate by preparing for laminate test and testing the laminate.
Subfield
Composites
Domain
Production Composites
Status
Registered
Status date
26 September 2001
Date version published
21 August 2009
Planned review date
31 December 2011
Entry information
Open.
Accreditation
Evaluation of documentation and visit by NZQA and
industry.
Standard setting body (SSB)
Boating Industry Training Organisation
Accreditation and Moderation Action Plan (AMAP) reference
0136
This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Special notes
1
Definitions
Product specification refers to the documented requirements of the manufactured
item.
Worksite procedures refer to the documented procedures for the machine and
worksite.
2
All worksite procedures must meet recognised codes of practice such as the Code of
Practice for Health and Safety in the Manufacture of Composites Based on Synthetic
Resins (Fibreglass), 1998. This code, and other relevant codes of practice, are
available from the Composites Association of New Zealand, PO Box 75 345,
Manurewa, Manukau 2243, or at
http://www.hazsubstancesinquiry.osh.govt.nz/order/catalogue/composites.shtml.
They include obligations required under current legislation. All worksite procedures
must also meet documented worksite safety procedures (where these exceed the
code) for personal, product and worksite safety.
 New Zealand Qualifications Authority 2016
3196 version 5
Page 2 of 3
Elements and performance criteria
Element 1
Prepare for test.
Range
hardeners, cure, weight, thickness, and material ratios.
Performance criteria
1.1
Test standard is sourced and verified as matching product specifications.
1.2
Test equipment is set up to match requirements of test standard.
Element 2
Test laminate.
Range
hardeners, cure, weight, thickness, and material ratios.
Performance criteria
2.1
Test procedure is followed according to test standard and worksite procedures.
2.2
Data is recorded according to test standard and worksite procedures.
2.3
Report produced meets requirements of test standard, purpose of test, and is in
accordance with the code of practice.
Please note
Providers must be accredited by NZQA, or an inter-institutional body with delegated
authority for quality assurance, before they can report credits from assessment against
unit standards or deliver courses of study leading to that assessment.
Industry Training Organisations must be accredited by NZQA before they can register
credits from assessment against unit standards.
Accredited providers and Industry Training Organisations assessing against unit standards
must engage with the moderation system that applies to those standards.
Accreditation requirements and an outline of the moderation system that applies to this
standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The
AMAP also includes useful information about special requirements for organisations
wishing to develop education and training programmes, such as minimum qualifications for
tutors and assessors, and special resource requirements.
 New Zealand Qualifications Authority 2016
3196 version 5
Page 3 of 3
Comments on this unit standard
Please contact the Boating Industry Training Organisation training@bia.org.nz if you wish
to suggest changes to the content of this unit standard.
 New Zealand Qualifications Authority 2016
Download