3193 version 5 Page 1 of 3 Apply quantity surveying to composite production Level 3 Credits 2 Purpose People credited with this unit standard are able to determine quantities for composite product components, and calculate from specifications the material requirements for the composite product. Subfield Composites Domain Production Composites Status Registered Status date 26 September 2001 Date version published 21 August 2009 Planned review date 31 December 2011 Entry information Open. Accreditation Evaluation of documentation and visit by NZQA and industry. Standard setting body (SSB) Boating Industry Training Organisation Accreditation and Moderation Action Plan (AMAP) reference 0136 This AMAP can be accessed at http://www.nzqa.govt.nz/framework/search/index.do. Special notes 1 Definitions Process specification refers to the documented order and method of applying the materials to manufacture the item (time, materials, temperature, application rates). Product specification refers to the documented requirements of the manufactured item. New Zealand Qualifications Authority 2016 3193 version 5 Page 2 of 3 2 All worksite procedures must meet recognised codes of practice such as the Code of Practice for Health and Safety in the Manufacture of Composites Based on Synthetic Resins (Fibreglass), 1998. This code, and other relevant codes of practice, are available from the Composites Association of New Zealand, PO Box 75 345, Manurewa, Manukau 2243, or at http://www.hazsubstancesinquiry.osh.govt.nz/order/catalogue/composites.shtml. They include obligations required under current legislation. All worksite procedures must also meet documented worksite safety procedures (where these exceed the code) for personal, product and worksite safety. Elements and performance criteria Element 1 Determine quantities for composite product components. Range may include but is not limited to – polyester resin, glass fibre, Kevlar. Performance criteria 1.1 Evidence of area calculations shown according to process specification. 1.2 Evidence of volume calculations shown according to process specification. 1.3 Evidence of thickness calculations shown according to process specification. Element 2 Calculate composite product material requirements from product specifications. Performance criteria 2.1 Material quantities calculated meet area, volume and thickness requirements according to the product specification. 2.2 Material quantities meet product specification. Please note Providers must be accredited by NZQA, or an inter-institutional body with delegated authority for quality assurance, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment. Industry Training Organisations must be accredited by NZQA before they can register credits from assessment against unit standards. Accredited providers and Industry Training Organisations assessing against unit standards must engage with the moderation system that applies to those standards. New Zealand Qualifications Authority 2016 3193 version 5 Page 3 of 3 Accreditation requirements and an outline of the moderation system that applies to this standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The AMAP also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements. Comments on this unit standard Please contact the Boating Industry Training Organisation training@bia.org.nz if you wish to suggest changes to the content of this unit standard. New Zealand Qualifications Authority 2016