NZQF NQ Ref Version 1337 Page 1 of 6 2 National Certificate in Drilling - Hydrocarbon (Driller) (Level 4) with strands in Off Shore Drilling, and On Shore Drilling Level 4 Credits 119-123 This qualification has been reviewed. The last date to meet the requirements is 31 December 2018. Transition Arrangements This qualification, the National Certificate in Drilling - Non-hydrocarbon (Senior Driller) (Level 4) with an optional strand in Water Well [Ref: 1333], the National Diploma in Drilling – Non-hydrocarbon (Driller Supervisor) (Level 5) [Ref: 1334], and the National Diploma in Drilling – Hydrocarbon (Rig Manager, Tool Pusher) (Level 5) with strands in Off Shore Drilling, and On Shore Drilling [Ref: 1338] have been reviewed and replaced by the New Zealand Certificate in Drilling (Level 5) [Ref: 2623]. The last date for entry into training programmes or courses leading to this qualification is 31 December 2015. The last date of assessment for the replaced qualification is 31 December 2018. People working towards the replaced qualification must complete its requirements or transfer to a programme of study or training leading to its replacement by 31 December 2018. It is anticipated that no existing candidates will be disadvantaged by these transition arrangements. However, anyone who feels that they have been disadvantaged may appeal to MITO at the address below. Appeals will be considered on a case by case basis. For detailed information see Review Summaries on the NZQA website. NZQF National Qualification Registration Information Process Registration Review Version 1 2 Date October 2007 March 2015 NZ Motor Industry Training Organisation (Incorporated) SSB Code 101542 MoE Code 9013 Last Date for Assessment December 2018 December 2018 New Zealand Qualifications Authority 2016 NZQF NQ Ref Version 1337 Page 2 of 6 2 Standard Setting Body NZ Motor Industry Training Organisation (Incorporated) (MITO) PO Box 10803 Wellington 6143 Telephone Fax Email Website 0800 88 2121 04 494 0006 info@mito.org.nz www.mito.org.nz NZ Motor Industry Training Organisation (Incorporated) SSB Code 101542 MoE Code 9013 New Zealand Qualifications Authority 2016 NZQF NQ Ref Version 1337 2 Page 3 of 6 National Certificate in Drilling - Hydrocarbon (Driller) (Level 4) with strands in Off Shore Drilling, and On Shore Drilling Level 4 Credits 119-123 Purpose The National Certificate in Drilling - Hydrocarbon (Driller) (Level 4) with strands in Off Shore Drilling, and On Shore Drilling, recognises the skills of an experienced senior driller at an oil or gas drilling operation. The holder of the qualification is able to perform tasks involving a broad range of varied activities most of which are complex and non-routine. They are responsible for the quantity and quality of the output of others and contribute to the development of technical solutions to non-routine problems. This qualification has a core component of essential skills required to work at a hydrocarbon drilling operation related to maintaining standard procedures and safe working practices; rigging up; conducting drilling operations; performing drilling calculations and reporting; carrying out well control and blowout prevention; participating in nippling-up and pressure tests; maintaining drilling rig communications systems; managing equipment maintenance; maintaining personnel management systems; participating in, leading and facilitating work teams in a hydrocarbon drilling environment; and managing non-routine, complex technical situations in a non-hydrocarbon drilling environment. A small core elective that recognises a variety of skill sets is required due to the diversity of drilling environments. The strands in Off Shore Drilling, and On Shore Drilling, provide opportunities for specialisation. The Off Shore Drilling strand recognises skills in conducting pre-spud operations in a hydrocarbon drilling environment. The On Shore Drilling strand recognises skills in shutting down rigs and coordinating air drilling operations in a hydrocarbon drilling environment. There is an optional standard in this qualification, however, it is not required to achieve the qualification but may be required in some employment contexts. This qualification includes Australian competency standards that are part of the DRT03 Drilling Training Package – Certificate 1V in Drilling. The New Zealand Extractive Industries Training Organisation has endorsed these standards. This qualification is part of a pathway, which begins with the National Certificate in Drilling - Hydrocarbon (Floorman) (Level 2) with strands in Off Shore Drilling, and On Shore Drilling [Ref: 1335], and continues with the National Certificate in Drilling - Hydrocarbon (Derrickman) (Level 3) with strands in Off Shore Drilling, and On Shore Drilling [Ref: 1336], culminating in the National Diploma in Drilling - Hydrocarbon (Rig Manager, Tool Pusher) (Level 5) with strands in Off Shore Drilling, and On Shore Drilling [Ref: 1338]. NZ Motor Industry Training Organisation (Incorporated) SSB Code 101542 MoE Code 9013 New Zealand Qualifications Authority 2016 NZQF NQ Ref Version 1337 Page 4 of 6 2 Special Notes Prerequisite: National Certificate in Drilling - Hydrocarbon (Floorman) (Level 3) with a strand in Off Shore Drilling, or On Shore Drilling [Ref: 1335], or demonstrate equivalent skills and knowledge. Credit Range Level 3 credits Level 4 credits Minimum totals Core Compulsory 7 101 108 Core Elective 0-5 0-5 5 Level 3 credits Level 4 credits Minimum totals Minimum total with strand Off Shore Drilling Strand 6 – 6 119 On Shore Drilling Strand – 10 10 123 Summary of Requirements Core Compulsory standards Core Elective – A minimum of 5 credits as specified One of the following strands is required Off Shore Drilling Strand On Shore Drilling Strand Award of NQF Qualifications Credit gained for a standard may be used only once to meet the requirements of this qualification. Unit standards and achievement standards that are equivalent in outcome are mutually exclusive for the purpose of award. The table of mutually exclusive standards is provided in section 7 of the New Zealand Qualifications Authority (NZQA) Rules and Procedures publications available at http://www.nzqa.govt.nz/ncea/acrp/index.html. Reviewed standards that continue to recognise the same overall outcome are registered as new versions and retain their identification number (ID). Any version of a standard with the same Id may be used to meet qualification requirements that list the ID and/or that specify the past or current classification of the standard. NZ Motor Industry Training Organisation (Incorporated) SSB Code 101542 MoE Code 9013 New Zealand Qualifications Authority 2016 NZQF NQ Ref 1337 Version Page 5 of 6 2 Detailed Requirements Core Compulsory The following standards are required Engineering and Technology > Drilling Industry > Drilling - Hydrocarbon ID Title Level 23187 23188 23190 23191 23192 23194 23195 23196 23197 23199 Maintain standard procedures and safe working practices in a hydrocarbon drilling environment Rig up in a hydrocarbon drilling environment 4 3 3 7 Conduct drilling operations in a hydrocarbon drilling environment Perform drilling calculations and reporting in a hydrocarbon drilling environment Carry out well control and blowout prevention in a hydrocarbon drilling environment Participate in nippling-up and pressure test in a hydrocarbon drilling environment Maintain drilling rig communications systems in a hydrocarbon drilling environment Manage equipment maintenance in a hydrocarbon drilling environment Maintain personnel management systems in a hydrocarbon drilling environment Participate in, lead and facilitate work teams in a hydrocarbon drilling environment 4 15 4 7 4 10 4 5 4 4 4 4 4 8 4 10 Engineering and Technology > Drilling Industry > Drilling - Non-hydrocarbon ID Title Level 22496 Credit Manage non-routine, complex technical situations in a non-hydrocarbon drilling environment 4 Credit 35 Core Elective A minimum of 5 credits at Level 4 or above From anywhere on the NQF Off Shore Drilling Strand The following standard is required Engineering and Technology > Drilling Industry > Drilling - Hydrocarbon ID Title Level 23189 Conduct pre-spud operations in a hydrocarbon drilling environment NZ Motor Industry Training Organisation (Incorporated) SSB Code 101542 MoE Code 9013 3 Credit 6 New Zealand Qualifications Authority 2016 NZQF NQ Ref 1337 Version Page 6 of 6 2 On Shore Drilling Strand The following standards are required Engineering and Technology > Drilling Industry > Drilling - Hydrocarbon ID Title Level Credit 23193 Shut down rig in a hydrocarbon drilling environment 4 3 23198 Coordinate air drilling operations in a hydrocarbon drilling environment 4 7 Optional standards The following standard is optional Engineering and Technology > Drilling Industry > Drilling - Hydrocarbon ID Title Level 23213 Assist in the transfer of passengers and freight during helicopter operations in a hydrocarbon drilling environment 2 Credit 6 Certification The certificate will display the logos of NZQA and NZ Motor Industry Training Organisation (Incorporated). Classification This qualification is classified according to the NQF classification system and the New Zealand Standard Classification of Education (NZSCED) system as specified below. DAS Classification NZSCED Code Description Code Description 2043 Engineering and Technology > Drilling Industry > Drilling Hydrocarbon 030303 Engineering and Related Technologies > Process and Resources Engineering > Mining and Resources Engineering Quality Management Systems Providers and Industry Training Organisations must be accredited by a recognised Quality Assurance Body before they can register credits from assessment against standards. Accredited providers and Industry Training Organisations assessing against standards must engage with the moderation system that applies to those standards. Accreditation requirements and the moderation system are outlined in the associated Accreditation and Moderation Action Plan (AMAP) for each standard. NZ Motor Industry Training Organisation (Incorporated) SSB Code 101542 MoE Code 9013 New Zealand Qualifications Authority 2016