NZQA Expiring unit standard
7515 version 7
Page 1 of 4
Title
Produce engineering and product design drawings
Level
3
Credits
5
Purpose
People credited with this unit standard are able to: produce
engineering and product design sketches, and communicate
the ideas; prepare to produce final drawings; produce final
engineering and product design drawings; and verify and
present the drawings.
Classification
Design > Design - Graphic Communication
Available grade
Achieved
Explanatory notes
1
This unit standard may be used to award credit for the achievement of learning
outcomes consistent with Technology in the New Zealand Curriculum (Learning
Media Wellington, 1995).
2
Design sketches and working drawings for engineering devices used in attaining this
unit standard need to be product design items consisting of several components,
including mechanical features, control mechanisms and structural elements.
3
Drawings must conform to standards convention NZ/AS1100.
4
Brief needs to include design problems for a specified client.
5
Examples of media and equipment which could be used in attaining this unit standard
are: graphite and colour pencil, pens and markers, cartridge and tracing paper,
drawing equipment, computer aided draughting (CAD) programs.
This unit standard is
expiring
Outcomes and evidence requirements
Outcome 1
Produce engineering and product design sketches, and communicate the ideas.
Evidence requirements
1.1
Media selected for design sketches are suitable for the subject and the
requirements of the brief.
1.2
Sketching techniques applied are suitable for the subject and the stage of the
design process.
NZQA National Qualifications Services
SSB Code 130301
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
7515 version 7
Page 2 of 4
1.3
Sketches, notes, and supporting data communicate ideas and information
relevant to the brief.
1.4
Graphic presentation of design ideas and solutions are complete, as determined
by the brief.
Outcome 2
Prepare to produce final drawings.
Evidence requirements
2.1
Equipment and resources assembled enable construction and completion of the
drawings.
Range
2.2
Types of drawings selected communicate the solution.
Range
2.3
examples are - pictorial drawings, detail, assembly, multi-view
orthographic views.
Drawing features selected communicate the solution.
Range
2.4
may include but are not limited to - brief, design sketches and
notes, standards information, references, drawing media and
equipment.
examples are - choice of view-point and views, number of
drawings, sectioned and/or auxiliary views, parts lists.
Selection of layout, scale, detail, and titling is planned and documented to
communicate the solution.
This unit standard is
Produce final engineering and product design drawings.
expiring
Evidence requirements
Outcome 3
3.1
Construction of views, layout, and scale communicate the design solution.
3.2
Selected drawings are applied in accordance with standards convention and
site practice.
3.3
Drawings communicate the solution to meet the requirements of the brief.
NZQA National Qualifications Services
SSB Code 130301
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
7515 version 7
Page 3 of 4
Outcome 4
Verify and present the drawings.
Evidence requirements
4.1
Drawings are checked for accuracy against the brief, standards convention, and
site requirements; and any needed corrections are identified.
4.2
Drawings are corrected, where necessary, and completed in accordance with
the brief.
4.3
Presentation of drawings meet client and site requirements in terms of titling,
supporting information, arrangement, and mounting.
Replacement information
This unit standard and unit standard 19355 have been
replaced by AS91631.
This unit standard is expiring. Assessment against the standard must take place by
the last date for assessment set out below.
Status information and last date for assessment for superseded versions
Process
Version Date
Last Date for Assessment
Registration
1
31 August 1996
31 December 2016
Revision
2
8 October 1998
31 December 2016
Revision
3
18 February 2002
31 December 2016
Revision
Review
Rollover
Rollover
This
unit standard
is
5
4 December 2012
31 December 2016
6
22 August 2014
31 December 2016
expiring
7
19 March 2015
31 December 2017
4
15 January 2004
31 December 2016
Consent and Moderation Requirements (CMR) reference
0226
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA,
before they can report credits from assessment against unit standards or deliver courses
of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by
NZQA before they can register credits from assessment against unit standards.
NZQA National Qualifications Services
SSB Code 130301
 New Zealand Qualifications Authority 2016
NZQA Expiring unit standard
7515 version 7
Page 4 of 4
Providers and Industry Training Organisations, which have been granted consent and
which are assessing against unit standards must engage with the moderation system that
applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies
to this standard are outlined in the Consent and Moderation Requirements (CMR). The
CMR also includes useful information about special requirements for organisations wishing
to develop education and training programmes, such as minimum qualifications for tutors
and assessors, and special resource requirements.
This unit standard is
expiring
NZQA National Qualifications Services
SSB Code 130301
 New Zealand Qualifications Authority 2016