ETSI TS 1
131 102 V13.3.0 (2016
16-04)
TECHNICAL SPECIFICATION
ION
Universal Mobile Tel
elecommunications System ((UMTS);
LTE;
Characteristics
ics of the Universal Subscribe
iber
Identity M
Module (USIM) application
(3GPP TS 31.1
.102 version 13.3.0 Release 13)
13
3GPP TS 31.102 version 13.3.0 Release 13
1
ETSI TS 131 102 V13.3.0 (2016-04)
Reference
RTS/TSGC-0631102vd30
Keywords
LTE,UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2016.
All rights reserved.
TM
TM
TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
2
ETSI TS 131 102 V13.3.0 (2016-04)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under
http://webapp.etsi.org/key/queryform.asp.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
3
ETSI TS 131 102 V13.3.0 (2016-04)
Contents
Intellectual Property Rights ................................................................................................................................2
Foreword.............................................................................................................................................................2
Modal verbs terminology....................................................................................................................................2
Foreword...........................................................................................................................................................11
Introduction ......................................................................................................................................................11
1
Scope ......................................................................................................................................................12
2
References ..............................................................................................................................................12
3
Definitions, symbols, abbreviations and coding conventions ................................................................15
3.1
3.2
3.3
3.4
4
4.1
4.2
4.2.1
4.2.2
4.2.3
4.2.4
4.2.5
4.2.6
4.2.7
4.2.8
4.2.9
4.2.10
4.2.11
4.2.12
4.2.13
4.2.14
4.2.15
4.2.16
4.2.17
4.2.18
4.2.19
4.2.20
4.2.21
4.2.22
4.2.23
4.2.24
4.2.25
4.2.26
4.2.27
4.2.28
4.2.29
4.2.30
4.2.31
4.2.32
4.2.33
4.2.34
4.2.35
4.2.36
4.2.37
Definitions ........................................................................................................................................................ 15
Symbols ............................................................................................................................................................ 16
Abbreviations ................................................................................................................................................... 16
Coding Conventions ......................................................................................................................................... 18
Contents of the Files ...............................................................................................................................18
Contents of the EFs at the MF level ................................................................................................................. 18
Contents of files at the USIM ADF (Application DF) level ............................................................................. 18
EFLI (Language Indication) ......................................................................................................................... 19
EFIMSI (IMSI) .............................................................................................................................................. 19
EFKeys (Ciphering and Integrity Keys) ........................................................................................................ 20
EFKeysPS (Ciphering and Integrity Keys for Packet Switched domain) ....................................................... 21
EFPLMNwAcT (User controlled PLMN selector with Access Technology) .................................................... 21
EFHPPLMN (Higher Priority PLMN search period) ....................................................................................... 22
EFACMmax (ACM maximum value) .............................................................................................................. 23
EFUST (USIM Service Table) ...................................................................................................................... 25
EFACM (Accumulated Call Meter) ............................................................................................................... 27
EFGID1 (Group Identifier Level 1) ............................................................................................................... 28
EFGID2 (Group Identifier Level 2) ............................................................................................................... 28
EFSPN (Service Provider Name) .................................................................................................................. 29
EFPUCT (Price per Unit and Currency Table)............................................................................................... 30
EFCBMI (Cell Broadcast Message identifier selection) ................................................................................ 31
EFACC (Access Control Class) ..................................................................................................................... 31
EFFPLMN (Forbidden PLMNs) ..................................................................................................................... 32
EFLOCI (Location Information) .................................................................................................................... 32
EFAD (Administrative Data) ........................................................................................................................ 33
Void ............................................................................................................................................................ 35
EFCBMID (Cell Broadcast Message Identifier for Data Download) .............................................................. 35
EFECC (Emergency Call Codes) .................................................................................................................. 36
EFCBMIR (Cell Broadcast Message Identifier Range selection) ................................................................... 37
EFPSLOCI (Packet Switched location information) ....................................................................................... 38
EFFDN (Fixed Dialling Numbers) ................................................................................................................ 39
EFSMS (Short messages) .............................................................................................................................. 39
EFMSISDN (MSISDN) ................................................................................................................................... 41
EFSMSP (Short message service parameters) ................................................................................................ 41
EFSMSS (SMS status) ................................................................................................................................... 43
EFSDN (Service Dialling Numbers).............................................................................................................. 43
EFEXT2 (Extension2) .................................................................................................................................... 44
EFEXT3 (Extension3) .................................................................................................................................... 44
EFSMSR (Short message status reports) ........................................................................................................ 45
EFICI (Incoming Call Information) .............................................................................................................. 45
EFOCI (Outgoing Call Information) ............................................................................................................. 49
EFICT (Incoming Call Timer) ...................................................................................................................... 50
EFOCT (Outgoing Call Timer) ..................................................................................................................... 50
EFEXT5 (Extension5) .................................................................................................................................... 51
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
4.2.38
4.2.39
4.2.40
4.2.41
4.2.42
4.2.43
4.2.44
4.2.45
4.2.46
4.2.47
4.2.48
4.2.49
4.2.50
4.2.51
4.2.52
4.2.53
4.2.54
4.2.55
4.2.56
4.2.57
4.2.58
4.2.59
4.2.60
4.2.61
4.2.62
4.2.63
4.2.64
4.2.65
4.2.66
4.2.67
4.2.68
4.2.69
4.2.70
4.2.71
4.2.72
4.2.73
4.2.74
4.2.75
4.2.76
4.2.77
4.2.78
4.2.79
4.2.80
4.2.81
4.2.82
4.2.83
4.2.84
4.2.85
4.2.86
4.2.87
4.2.88
4.2.89
4.2.90
4.2.91
4.2.92
4.2.93
4.2.94
4.2.95
4.2.96
4.2.97
4.2.98
4
ETSI TS 131 102 V13.3.0 (2016-04)
EFCCP2 (Capability Configuration Parameters 2) ........................................................................................ 51
EFeMLPP (enhanced Multi Level Precedence and Pre-emption) ................................................................... 52
EFAaeM (Automatic Answer for eMLPP Service) ........................................................................................ 53
Void ............................................................................................................................................................ 54
EFHiddenkey (Key for hidden phone book entries) ......................................................................................... 54
Void ............................................................................................................................................................ 54
EFBDN (Barred Dialling Numbers) .............................................................................................................. 54
EFEXT4 (Extension4) .................................................................................................................................... 55
EFCMI (Comparison Method Information) .................................................................................................. 55
EFEST (Enabled Services Table) .................................................................................................................. 56
EFACL (Access Point Name Control List) ................................................................................................... 56
EFDCK (Depersonalisation Control Keys) ................................................................................................... 57
EFCNL (Co-operative Network List) ............................................................................................................ 57
EFSTART-HFN (Initialisation values for Hyperframe number)........................................................................ 59
EFTHRESHOLD (Maximum value of START)................................................................................................. 59
EFOPLMNwACT (Operator controlled PLMN selector with Access Technology) ........................................... 59
EFHPLMNwAcT (HPLMN selector with Access Technology) ......................................................................... 60
EFARR (Access Rule Reference) .................................................................................................................. 61
Void ............................................................................................................................................................ 62
EFNETPAR (Network Parameters) ................................................................................................................. 62
EFPNN (PLMN Network Name) .................................................................................................................. 64
EFOPL (Operator PLMN List) ...................................................................................................................... 65
EFMBDN (Mailbox Dialling Numbers) ......................................................................................................... 66
EFEXT6 (Extension6) .................................................................................................................................... 67
EFMBI (Mailbox Identifier) .......................................................................................................................... 67
EFMWIS (Message Waiting Indication Status) ............................................................................................. 67
EFCFIS (Call Forwarding Indication Status)................................................................................................. 69
EFEXT7 (Extension7) .................................................................................................................................... 70
EFSPDI (Service Provider Display Information) .......................................................................................... 70
EFMMSN (MMS Notification) ....................................................................................................................... 71
EFEXT8 (Extension 8) ................................................................................................................................... 73
EFMMSICP (MMS Issuer Connectivity Parameters) ...................................................................................... 73
EFMMSUP (MMS User Preferences) ............................................................................................................. 76
EFMMSUCP (MMS User Connectivity Parameters) ....................................................................................... 77
EFNIA (Network's Indication of Alerting) ................................................................................................... 77
EFVGCS (Voice Group Call Service)............................................................................................................ 78
EFVGCSS (Voice Group Call Service Status) ............................................................................................... 80
EFVBS (Voice Broadcast Service)................................................................................................................ 80
EFVBSS (Voice Broadcast Service Status).................................................................................................... 82
EFVGCSCA (Voice Group Call Service Ciphering Algorithm) ..................................................................... 83
EFVBSCA (Voice Broadcast Service Ciphering Algorithm).......................................................................... 84
EFGBABP (GBA Bootstrapping parameters) ................................................................................................. 84
EFMSK (MBMS Service Keys List) ............................................................................................................. 85
EFMUK (MBMS User Key) .......................................................................................................................... 86
Void ............................................................................................................................................................ 87
EFGBANL (GBA NAF List)........................................................................................................................... 87
EFEHPLMN (Equivalent HPLMN) ................................................................................................................. 88
EFEHPLMNPI (Equivalent HPLMN Presentation Indication) ......................................................................... 88
EFLRPLMNSI (Last RPLMN Selection Indication) ......................................................................................... 89
EFNAFKCA (NAF Key Centre Address) ........................................................................................................ 89
EFSPNI (Service Provider Name Icon) ......................................................................................................... 90
EFPNNI (PLMN Network Name Icon) ......................................................................................................... 91
EFNCP-IP (Network Connectivity Parameters for USIM IP connections) ..................................................... 91
EFEPSLOCI (EPS location information) ......................................................................................................... 94
EFEPSNSC (EPS NAS Security Context) ....................................................................................................... 96
EFUFC (USAT Facility Control)................................................................................................................ 97
EFNASCONFIG (Non Access Stratum Configuration) ..................................................................................... 98
EFUICCIARI (UICC IARI) ............................................................................................................................ 102
EFPWS (Public Warning System) ............................................................................................................... 103
EFFDNURI (Fixed Dialling Numbers URI) .................................................................................................. 103
EFBDNURI (Barred Dialling Numbers URI) ................................................................................................ 104
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
5
ETSI TS 131 102 V13.3.0 (2016-04)
4.2.99
EFSDNURI (Service Dialling Numbers URI) ............................................................................................... 105
4.2.100
EFIWL (IMEI(SV) White Lists) ................................................................................................................. 105
4.2.101
EFIPS (IMEI(SV) Pairing Status) ............................................................................................................... 107
4.2.102
EFIPD (IMEI(SV) of Pairing Device) ........................................................................................................ 107
4.2.103
EFePDGId (Home ePDG Identifier) ............................................................................................................. 108
4.2.104
EFePDGSelection (ePDG Selection Information)............................................................................................. 109
4.2.104
EFePDGIdEm (Emergency ePDG Identifier) ................................................................................................. 111
4.2.105
EFePDGSelectionEm (ePDG Selection Information for Emergency Services) .................................................. 111
4.3
DFs at the USIM ADF (Application DF) Level ............................................................................................. 111
4.4
Contents of DFs at the USIM ADF (Application DF) level ........................................................................... 112
4.4.1
Contents of files at the DF SoLSA level ................................................................................................... 112
4.4.1.1
EFSAI (SoLSA Access Indicator)......................................................................................................... 112
4.4.1.2
EFSLL (SoLSA LSA List) .................................................................................................................... 113
4.4.1.3
LSA Descriptor files ........................................................................................................................... 115
4.4.2
Contents of files at the DF PHONEBOOK level ...................................................................................... 116
4.4.2.1
EFPBR (Phone Book Reference file) .................................................................................................... 117
4.4.2.2
EFIAP (Index Administration Phone book) .......................................................................................... 119
4.4.2.3
EFADN (Abbreviated dialling numbers) ............................................................................................... 119
4.4.2.4
EFEXT1 (Extension1) ............................................................................................................................ 122
4.4.2.5
EFPBC (Phone Book Control) ............................................................................................................... 124
4.4.2.6
EFGRP (Grouping file) .......................................................................................................................... 125
4.4.2.7
EFAAS (Additional number Alpha String) ............................................................................................ 125
4.4.2.8
EFGAS (Grouping information Alpha String) ....................................................................................... 126
4.4.2.9
EFANR (Additional Number) ................................................................................................................ 126
4.4.2.10
EFSNE (Second Name Entry) ................................................................................................................ 128
4.4.2.11
EFCCP1 (Capability Configuration Parameters 1) ................................................................................. 129
4.4.2.12
Phone Book Synchronisation .............................................................................................................. 129
4.4.2.12.1
EFUID (Unique Identifier)............................................................................................................... 129
4.4.2.12.2
EFPSC (Phone book Synchronisation Counter)............................................................................... 130
4.4.2.12.3
EFCC (Change Counter) ................................................................................................................. 131
4.4.2.12.4
EFPUID (Previous Unique Identifier) .............................................................................................. 132
4.4.2.13
EFEMAIL (e-mail address) ..................................................................................................................... 132
4.4.2.14
Phonebook restrictions ........................................................................................................................ 133
4.4.2.15
EFPURI (Phonebook URIs) ................................................................................................................... 133
4.4.3
Contents of files at the DF GSM-ACCESS level (Files required for GSM Access) .............................. 134
4.4.3.1
EFKc (GSM Ciphering key Kc) ........................................................................................................... 135
4.4.3.2
EFKcGPRS (GPRS Ciphering key KcGPRS) .......................................................................................... 135
4.4.3.3
Void..................................................................................................................................................... 136
4.4.3.4
EFCPBCCH (CPBCCH Information) ...................................................................................................... 136
4.4.3.5
EFInvScan (Investigation Scan) .............................................................................................................. 137
4.4.4
Contents of files at the MexE level ..................................................................................................... 137
4.4.4.1
EFMexE-ST (MexE Service table) ..................................................................................................... 138
4.4.4.2
EFORPK (Operator Root Public Key) .............................................................................................. 138
4.4.4.3
EFARPK (Administrator Root Public Key) ...................................................................................... 140
4.4.4.4
EFTPRPK (Third Party Root Public Key) ......................................................................................... 141
4.4.4.5
EFTKCDF (Trusted Key/Certificates Data Files) .............................................................................. 141
4.4.5
Contents of files at the DF WLAN level................................................................................................... 142
4.4.5.1
EFPseudo (Pseudonym) .......................................................................................................................... 142
4.4.5.2
EFUPLMNWLAN (User controlled PLMN selector for I-WLAN Access) ................................................ 143
4.4.5.3
EFOPLMNWLAN (Operator controlled PLMN selector for I-WLAN Access) ............................................... 143
4.4.5.4
EFUWSIDL (User controlled WLAN Specific Identifier List) ................................................................ 144
4.4.5.5
EFOWSIDL (Operator controlled WLAN Specific IdentifierList) .......................................................... 145
4.4.5.6
EFWRI (WLAN Reauthentication Identity) .......................................................................................... 145
4.4.5.7
EFHWSIDL (Home I-WLAN Specific Identifier List) ............................................................................ 146
4.4.5.8
EFWEHPLMNPI (I-WLAN Equivalent HPLMN Presentation Indication)................................................ 147
4.4.5.9
EFWHPI (I-WLAN HPLMN Priority Indication) .................................................................................. 147
4.4.5.10
EFWLRPLMN (I-WLAN Last Registered PLMN) ................................................................................... 148
4.4.5.11
EFHPLMNDAI (HPLMN Direct Access Indicator) .................................................................................. 148
4.4.6
Contents of files at the DF HNB level ...................................................................................................... 149
4.4.6.1
Introduction ......................................................................................................................................... 149
4.4.6.2
EFACSGL (Allowed CSG Lists) ............................................................................................................. 149
4.4.6.3
EFCSGT (CSG Type) ............................................................................................................................. 152
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
4.4.6.4
4.4.6.5
4.4.6.6
4.4.6.7
4.4.7
4.4.8
4.4.8.1
4.4.8.2
4.4.8.3
4.4.8.4
4.4.8.5
4.4.8.6
4.4.8.7
4.4.8.8
4.4.8.9
4.4.8.10
4.4.8.11
4.4.8.12
4.4.8.12
4.4.8.13
4.4.8.14
4.4.9
4.4.9.1
4.4.9.2
4.4.9.3
4.5
4.5.1
4.5.2
4.5.3
4.5.4
4.5.5
4.5.6
4.5.7
4.5.8
4.5.9
4.6
4.6.1
4.6.1.1
4.6.1.2
4.6.1.3
4.6.1.4
4.6.1.5
4.6.2
4.6.3
4.6.3.1
4.6.3.2
4.6.4
4.6.4.1
4.6.4.2
4.6.4.3
4.6.4.4
4.6.4.5
4.7
5
5.1
5.1.1
5.1.1.1
5.1.1.2
5.1.1.3
5.1.2
5.1.2.1
6
ETSI TS 131 102 V13.3.0 (2016-04)
EFHNBN (Home NodeB Name) ............................................................................................................ 154
EFOCSGL (Operator CSG Lists) ............................................................................................................ 154
EFOCSGT (Operator CSG Type) ............................................................................................................ 156
EFOHNBN (Operator Home NodeB Name)............................................................................................ 157
Void .......................................................................................................................................................... 157
Contents of files at the DF ProSe level ..................................................................................................... 157
Introduction ......................................................................................................................................... 157
EFPROSE_MON (ProSe Monitoring Parameters) ...................................................................................... 157
EFPROSE_ANN (ProSe Announcing Parameters)..................................................................................... 158
EFPROSEFUNC (HPLMN ProSe Function) .............................................................................................. 159
EFPROSE_RADIO_COM (ProSe Direct Communication Radio Parameters) ............................................... 160
EFPROSE_RADIO_MON (ProSe Direct Discovery Monitoring Radio Parameters)...................................... 161
EFPROSE_RADIO_ANN (ProSe Direct Discovery Announcing Radio Parameters) .................................... 163
EFPROSE_POLICY (ProSe Policy Parameters) .......................................................................................... 164
EFPROSE_PLMN (ProSe PLMN Parameters)............................................................................................ 166
EFPROSE_GC (ProSe Group Counter) ..................................................................................................... 167
EFPST (ProSe Service Table) ............................................................................................................... 168
EFPROSE_UIRC (ProSe UsageInformationReportingConfiguration) ....................................................... 169
EFPROSE_GM_DISCOVERY (ProSe Group Member Discovery Parameters) ................................................ 172
EFPROSE_RELAY (ProSe Relay Parameters) ............................................................................................ 173
EFPROSE_RELAY_DISCOVERY (ProSe Relay Discovery Parameters)........................................................... 174
Contents of files at the DF ACDC level ................................................................................................... 177
Introduction ......................................................................................................................................... 177
EFACDC_LIST (ACDC List) .................................................................................................................... 177
EFACDC_OS_CONFIG (ACDC OS configuration) ...................................................................................... 178
Contents of Efs at the TELECOM level ......................................................................................................... 178
EFADN (Abbreviated dialling numbers) ..................................................................................................... 179
EFEXT1 (Extension1) .................................................................................................................................. 179
EFECCP (Extended Capability Configuration Parameter)........................................................................... 179
EFSUME (SetUpMenu Elements) ................................................................................................................ 179
EFARR (Access Rule Reference) ................................................................................................................ 179
EFICE_DN (In Case of Emergency – Dialling Number) .............................................................................. 179
EFICE_FF (In Case of Emergency – Free Format) ....................................................................................... 180
EFRMA (Remote Management Actions) ..................................................................................................... 181
EFPSISMSC (Public Service Identity of the SM-SC) .................................................................................... 181
Contents of DFs at the TELECOM level........................................................................................................ 181
Contents of files at the DFGRAPHICS level ................................................................................................... 182
EFIMG (Image) ..................................................................................................................................... 182
EFIIDF (Image Instance Data Files) ...................................................................................................... 183
EFICE_graphics (In Case of Emergency – Graphics) ......................................................................... 184
Void..................................................................................................................................................... 184
Void..................................................................................................................................................... 184
Contents of files at the DFPHONEBOOK under the DFTELECOM ...................................................................... 184
Contents of files at the DFMULTIMEDIA level ............................................................................................... 184
EFMML (Multimedia Messages List).................................................................................................... 185
EFMMDF (Multimedia Messages Data File) .......................................................................................... 187
Contents of files at the DFMCPTT level ....................................................................................................... 188
EFMST (MCPTT Service Table) ........................................................................................................... 188
EFMCPTT_UE_CONFIG (MCPTT UE configuration data)........................................................................... 188
EFMCPTT_USER_CONFIG (MCPTT User configuration data) ..................................................................... 189
EFMCPTT_GROUP_CONFIG (MCPTT Group configuration data) ................................................................ 189
EFMCPTT_SERVICE_CONFIG (MCPTT Service configuration data)............................................................. 190
Files of USIM ................................................................................................................................................. 191
Application protocol .............................................................................................................................195
USIM management procedures ...................................................................................................................... 195
Initialisation .............................................................................................................................................. 196
USIM application selection ................................................................................................................. 196
USIM initialisation .............................................................................................................................. 196
GSM related initialisation procedures ................................................................................................. 197
Session termination ................................................................................................................................... 197
3G session termination ........................................................................................................................ 197
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
7
ETSI TS 131 102 V13.3.0 (2016-04)
5.1.2.1.1
GSM termination procedures......................................................................................................... 198
5.1.2.2
3G session reset ................................................................................................................................... 198
5.1.3
USIM application closure ......................................................................................................................... 198
5.1.4
Emergency call codes ............................................................................................................................... 198
5.1.5
Language indication.................................................................................................................................. 198
5.1.6
Administrative information request .......................................................................................................... 198
5.1.7
USIM service table request ....................................................................................................................... 198
5.1.8
Void .......................................................................................................................................................... 198
5.1.9
UICC presence detection .......................................................................................................................... 198
5.1.10
UICC interface in PSM ............................................................................................................................. 199
5.1.11
UICC interface during eDRX ................................................................................................................... 199
5.2
USIM security related procedures .................................................................................................................. 199
5.2.1
Authentication algorithms computation .................................................................................................... 199
5.2.2
IMSI request ............................................................................................................................................. 199
5.2.3
Access control information request .......................................................................................................... 199
5.2.4
Higher Priority PLMN search period request ........................................................................................... 199
5.2.5
Location information ................................................................................................................................ 199
5.2.6
Cipher and Integrity key ........................................................................................................................... 200
5.2.7
Forbidden PLMN ...................................................................................................................................... 200
5.2.8
Void .......................................................................................................................................................... 200
5.2.9
User Identity Request................................................................................................................................ 200
5.2.10
GSM Cipher key ....................................................................................................................................... 200
5.2.11
GPRS Cipher key ...................................................................................................................................... 200
5.2.12
Initialisation value for Hyperframe number .............................................................................................. 200
5.2.13
Maximum value of START ...................................................................................................................... 200
5.2.14
HPLMN selector with Access Technology request .................................................................................. 200
5.2.15
Packet Switched Location information ..................................................................................................... 200
5.2.16
Cipher and Integrity key for Packet Switched domain ............................................................................. 200
5.2.17
LSA information ....................................................................................................................................... 201
5.2.18
Voice Group Call Services ....................................................................................................................... 201
5.2.19
Voice Broadcast Services ......................................................................................................................... 201
5.2.20
Generic Bootstrapping architecture (Bootstrap) ....................................................................................... 201
5.2.21
Generic Bootstrapping architecture (NAF Derivation) ............................................................................. 201
5.2.22
MSK MIKEY Message Reception............................................................................................................ 201
5.2.23
MTK MIKEY Message Reception ........................................................................................................... 201
5.2.24
Void .......................................................................................................................................................... 202
5.2.25
EHPLMN request ..................................................................................................................................... 202
5.2.26
Last RPLMN Selection Indication request ............................................................................................... 202
5.2.29
Non Access Stratum Configuration .......................................................................................................... 202
5.2.30
PWS Configuration ................................................................................................................................... 202
5.3
Subscription related procedures ..................................................................................................................... 202
5.3.1
Phone book procedures ............................................................................................................................. 202
5.3.1.1
Initialisation ........................................................................................................................................ 202
5.3.1.2
Creation/Deletion of information ........................................................................................................ 203
5.3.1.3
Hidden phone book entries.................................................................................................................. 203
5.3.2
Dialling numbers ...................................................................................................................................... 203
5.3.3
Short messages.......................................................................................................................................... 205
5.3.4
Advice of charge ....................................................................................................................................... 205
5.3.5
Capability configuration parameters ......................................................................................................... 206
5.3.6
User controlled PLMN selector with Access Technology ........................................................................ 206
5.3.7
Cell broadcast message identifier ............................................................................................................. 206
5.3.8
Group identifier level 1 ............................................................................................................................. 206
5.3.9
Group identifier level 2 ............................................................................................................................. 206
5.3.10
Service provider name .............................................................................................................................. 206
5.3.11
Enhanced multi level precedence and pre-emption service ...................................................................... 206
5.3.12
Cell broadcast message identifier ranges .................................................................................................. 206
5.3.13
Short message status report....................................................................................................................... 207
5.3.14
APN Control List ...................................................................................................................................... 207
5.3.15
Depersonalisation Control Keys ............................................................................................................... 207
5.3.16
Co-operative Network List ....................................................................................................................... 208
5.3.17
CPBCCH information ............................................................................................................................... 208
5.3.18
Investigation Scan ..................................................................................................................................... 208
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
5.3.19
5.3.20
5.3.21
5.3.22
5.3.23
5.3.24
5.3.25
5.3.26
5.3.27
5.3.28
5.3.29
5.3.30
5.3.31
5.3.32
5.3.33
5.3.34
5.3.35
5.3.36
5.3.37
5.3.38
5.3.39
5.3.40
5.3.40.1
5.3.40.2
5.3.41
5.3.42
5.4
5.4.1
5.4.2
5.4.3
5.4.4
5.4.5
5.4.6
5.4.7
5.4.8
5.4.9
5.4.10
5.4.11
5.4.12
5.4.13
5.5
5.5.1
5.5.2
5.5.3
5.5.4
5.5.5
5.6
5.6.1
5.6.2
5.6.3
5.6.4
5.7
5.8
5.8.1
5.8.2
5.8.3
5.9
5.9.1
5.9.2
5.9.3
5.9.4
5.9.5
8
ETSI TS 131 102 V13.3.0 (2016-04)
Enabled Services Table Request ............................................................................................................... 208
Operator controlled PLMN selector with Access Technology ................................................................. 208
HPLMN selector with Access Technology ............................................................................................... 208
Automatic Answer on eMLPP service ...................................................................................................... 208
Network Parameter information ............................................................................................................... 208
PLMN network name................................................................................................................................ 208
Operator PLMN List ................................................................................................................................. 209
Message Waiting Indication ..................................................................................................................... 209
Call Forwarding Indication Status ............................................................................................................ 209
Service Provider Display Information ...................................................................................................... 209
MMS Notifications ................................................................................................................................... 209
MMS Issuer Connectivity Parameters ...................................................................................................... 210
MMS User Preferences ............................................................................................................................. 210
MMS User Connectivity Parameters ........................................................................................................ 210
Network's indication of alerting ................................................................................................................ 210
Multimedia Messages Storage .................................................................................................................. 210
Equivalent HPLMN Presentation Indication request ................................................................................ 211
NAF Key Centre Address request............................................................................................................. 211
Service provider name Icon ...................................................................................................................... 211
PLMN network name Icon ....................................................................................................................... 211
ICE Information request ........................................................................................................................... 211
eCall Related Procedures .......................................................................................................................... 211
eCall Only support .............................................................................................................................. 211
eCall and Normal call support............................................................................................................. 212
SM-over-IP ............................................................................................................................................... 212
UICC access to IMS ................................................................................................................................. 212
USAT related procedures ............................................................................................................................... 212
Data Download via SMS-PP ..................................................................................................................... 212
Image Request .......................................................................................................................................... 212
Data Download via SMS-CB .................................................................................................................... 212
Call Control by USIM............................................................................................................................... 212
MO-SMS control by USIM ...................................................................................................................... 213
Data Download via USSD and USSD application mode .......................................................................... 213
Additional TERMINAL PROFILE after UICC activation ....................................................................... 213
Terminal Applications .............................................................................................................................. 213
Call control on EPS PDN connection by USIM ....................................................................................... 213
Communication Control for IMS by USIM .............................................................................................. 213
USAT Facility Control.............................................................................................................................. 213
Extended Terminal Applications .............................................................................................................. 213
USAT application pairing procedure ........................................................................................................ 213
MexE related procedures ................................................................................................................................ 214
MexE ST ................................................................................................................................................... 214
Operator root public key ........................................................................................................................... 214
Administrator root public key ................................................................................................................... 214
Third Party root public key(s) ................................................................................................................... 214
Trusted Key/Certificates Data Files .......................................................................................................... 215
WLAN related procedures.............................................................................................................................. 215
WLAN Selection related Procedures ........................................................................................................ 215
WLAN PLMN Selection related procedures ............................................................................................ 215
WLAN access authentication related procedures ..................................................................................... 215
WLAN access re-authentication related procedures ................................................................................. 215
Network Connectivity Parameters for UICC IP connections related procedures ..................................... 215
H(e)NB related procedures ............................................................................................................................. 216
CSG Access Control procedures ............................................................................................................... 216
CSG Type related procedures ................................................................................................................... 216
HNB name display related procedures...................................................................................................... 216
ProSe related procedures ................................................................................................................................ 217
ProSe Direct Discovery Provisioning parameters ..................................................................................... 217
HPLMN ProSe Function address .............................................................................................................. 217
ProSe direct communication related Procedures....................................................................................... 217
ProSe direct discovery related Procedures ................................................................................................ 217
ProSe direct communication related Procedures....................................................................................... 217
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
5.9.6
5.9.7
5.9.8
5.9.9
5.9.10
5.10
5.10.1
5.10.2
5.10.3
5.11
5.11.1
5.12
5.12.1
5.12.2
5.12.3
5.12.4
5.13
5.13.1
5.13.2
5.13.3
6
Security features ...................................................................................................................................220
Authentication and key agreement procedure ................................................................................................ 220
Cryptographic Functions ................................................................................................................................ 221
GSM Conversion Functions ........................................................................................................................... 221
User verification and file access conditions ................................................................................................... 221
USIM Commands .................................................................................................................................221
7.1
7.1.1
7.1.1.1
7.1.1.2
7.1.1.3
7.1.1.4
7.1.1.5
7.1.1.6
7.1.1.7
7.1.1.8
7.1.1.9
7.1.1.10
7.1.1.11
7.1.1.12
7.1.2
7.1.2.1
7.1.2.2
7.1.2.3
7.1.2.4
7.1.2.5
7.1.2.6
7.1.2.6.1
7.1.2.6.2
7.2
7.3
7.3.1
7.3.2
7.4
8
ETSI TS 131 102 V13.3.0 (2016-04)
ProSe direct communication related Procedures....................................................................................... 217
ProSe Group Counter related Procedures ................................................................................................. 218
ProSe Usage Information Reporting Configuration related Procedures ................................................... 218
ProSe Group Member Discovery related Procedures ............................................................................... 218
ProSe Relay related Procedures ................................................................................................................ 218
ePDG Selection related procedures ................................................................................................................ 218
Home ePDG Identifier .............................................................................................................................. 218
ePDG Selection Information ..................................................................................................................... 218
ePDG configuration information configured but empty ........................................................................... 219
ACDC related procedures .............................................................................................................................. 219
ACDC Configuration ................................................................................................................................ 219
MCPTT related procedures ............................................................................................................................ 219
MCPTT UE configuration ........................................................................................................................ 219
MCPTT User configuration ...................................................................................................................... 219
MCPTT Group configuration ................................................................................................................... 219
MCPTT Service configuration .................................................................................................................. 219
ePDG Selection for Emergency Services related procedures ......................................................................... 219
Emergency ePDG Identifier ...................................................................................................................... 219
ePDG Selection Information for Emergency Services .............................................................................. 220
ePDG configuration information for Emergency Services configured but empty .................................... 220
6.1
6.2
6.3
6.4
7
9
AUTHENTICATE ......................................................................................................................................... 221
Command description ............................................................................................................................... 221
3G security context ............................................................................................................................. 222
GSM security context .......................................................................................................................... 223
VGCS/VBS security context ............................................................................................................... 223
GBA security context (Bootstrapping Mode) ..................................................................................... 224
GBA security context (NAF Derivation Mode) .................................................................................. 224
MBMS security context (MSK Update Mode) ................................................................................... 225
Void..................................................................................................................................................... 227
MBMS security context (MTK Generation Mode) ............................................................................. 227
MBMS security context (MSK Deletion Mode) ................................................................................. 227
MBMS security context (MUK Deletion Mode)................................................................................. 227
Local Key Establishment security context (Key Derivation mode) .................................................... 228
Local Key Establishment security context (Key Availability Check mode) ....................................... 229
Command parameters and data ................................................................................................................. 229
GSM/3G security context .................................................................................................................... 231
VGCS/VBS security context ............................................................................................................... 231
GBA security context (Bootstrapping Mode) ..................................................................................... 232
GBA security context (NAF Derivation Mode) .................................................................................. 233
MBMS security context (All Modes) .................................................................................................. 233
Local Key Establishment security context (All Modes) ...................................................................... 234
Local Key Establishment security context (Key Derivation mode)............................................... 234
Local Key Establishment security context (Key Availability Check mode) ................................. 236
Void ................................................................................................................................................................ 237
Status Conditions Returned by the USIM ...................................................................................................... 237
Security management ................................................................................................................................ 237
Status Words of the Commands ................................................................................................................ 238
Optional commands ........................................................................................................................................ 239
Void ......................................................................................................................................................239
Annex A (informative):
EF changes via Data Download or USAT applications ............................240
Annex B (normative):
Image Coding Schemes................................................................................244
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
10
ETSI TS 131 102 V13.3.0 (2016-04)
B.1
Basic Image Coding Scheme ................................................................................................................244
B.2
Colour Image Coding Scheme .............................................................................................................245
B.3
Colour Image Coding Scheme with Transparency...............................................................................246
Annex C (informative):
Structure of the Network parameters TLV objects ..................................247
Annex D (informative):
Tags defined in 31.102 .................................................................................248
Annex E (informative):
Suggested contents of the EFs at pre-personalization ..............................252
Annex F (informative):
Examples of coding of LSA Descriptor files for SoLSA ...........................256
Annex G (informative):
Phonebook Example ....................................................................................257
Annex H (normative):
List of SFI Values.........................................................................................261
H.1
List of SFI Values at the USIM ADF Level .........................................................................................261
H.2
List of SFI Values at the DF GSM-ACCESS Level.............................................................................261
H.3
List of SFI Values at the DF WLAN Level..........................................................................................262
H.4
List of SFI Values at the DF HNB Level .............................................................................................262
H.5
List of SFI Values at the DF ProSe Level ............................................................................................262
H.6
List of SFI Values at the DF ACDC Level...........................................................................................262
H.7
List of SFI Values at the DF MCPTT Level ........................................................................................263
Annex I (informative):
USIM Application Session Activation/Termination .................................264
Annex J (informative):
Example of MMS coding .............................................................................265
J.1
J.2
Coding example for MMS User Preferences .................................................................................................. 265
Coding Example for MMS Issuer/User Connectivity Parameters .................................................................. 265
Annex K (informative):
Examples of VService_Id coding ................................................................267
Annex L :
USIM-INI and USIM-RN for Relay Nodes (normative) ..........................268
L.1
L.2
L.3
L.4
L.5
L.6
L.6.1
L.6.1.1
L.6.2
L.6.2.1
L.6.2.2
Introduction .................................................................................................................................................... 268
Application selection procedure ..................................................................................................................... 268
Secure channel operation................................................................................................................................ 269
Support of commands ..................................................................................................................................... 269
Storage of certificates ..................................................................................................................................... 269
Relay Node files support ................................................................................................................................ 269
USIM-INI Files ......................................................................................................................................... 269
EFCERT (UICC Certificate) .................................................................................................................. 269
USIM-RN Files ......................................................................................................................................... 270
eFRNid (Relay Node identifier) ............................................................................................................. 270
EFSCCmax (maximum value of Secure Channel Counter) ..................................................................... 271
Annex M :
M.1
M.2
M.3
USIM application dedicated for IOPS (normative) ..................................272
Introduction .................................................................................................................................................... 272
Features of the USIM dedicated for IOPS ...................................................................................................... 272
Selection mechanisms ............................................................................................................................... 272
Annex N (informative):
Change history .............................................................................................273
History ............................................................................................................................................................277
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
11
ETSI TS 131 102 V13.3.0 (2016-04)
Foreword
This Technical Specification (TS) has been produced by the 3rd Generation Partnership Project (3GPP).
The contents of the present document are subject to continuing work within the TSG and may change following formal
TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an
identifying change of release date and an increase in version number as follows:
Version x.y.z
where:
x the first digit:
1 presented to TSG for information;
2 presented to TSG for approval;
3 or greater indicates TSG approved document under change control.
Y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc.
Z the third digit is incremented when editorial only changes have been incorporated in the document.
Introduction
The present document defines the Universal Subscriber Identity Module (USIM) application. This application resides
on the UICC, an IC card specified in TS 31.101 [11]. In particular, TS 31.101 [11] specifies the application independent
properties of the UICC/terminal interface such as the physical characteristics and the logical structure.
TS 31.101 [11] is one of the core documents for this specification and is therefore referenced in many places in the
present document.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
1
12
ETSI TS 131 102 V13.3.0 (2016-04)
Scope
The present document defines the USIM application for 3G telecom network operation.
The present document specifies:
-
specific command parameters;
-
file structures;
-
contents of Efs (Elementary Files);
-
security functions;
-
application protocol to be used on the interface between UICC (USIM) and ME.
This is to ensure interoperability between a USIM and an ME independently of the respective manufacturer, card issuer
or operator.
The present document does not define any aspects related to the administrative management phase of the USIM. Any
internal technical realisation of either the USIM or the ME is only specified where these are reflected over the interface.
The present document does not specify any of the security algorithms which may be used.
2
References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including
a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same
Release as the present document.
[1]
3GPP TS 21.111: "USIM and IC Card Requirements".
[2]
3GPP TS 22.011: "Service accessibility".
[3]
3GPP TS 22.024: "Description of Charge Advice Information (CAI)".
[4]
3GPP TS 22.030: "Man-Machine Interface (MMI) of the User Equipment (UE)".
[5]
3GPP TS 23.038: "Alphabets and language".
[6]
3GPP TS 23.040: "Technical realization of the Short Message Service (SMS)".
[7]
3GPP TS 23.060: "General Packet Radio Service (GPRS); Service description; Stage 2".
[8]
3GPP TS 22.067: "enhanced Multi Level Precedence and Pre-emption service (eMLPP) - Stage 1".
[9]
3GPP TS 24.008: "Mobile Radio Interface Layer 3 specification; Core Network Protocols; Stage
3".
[10]
3GPP TS 24.011: "Point-to-Point (PP) Short Message Service (SMS) support on mobile radio
interface".
[11]
3GPP TS 31.101: "UICC-Terminal Interface, Physical and Logical Characteristics".
[12]
3GPP TS 31.111: "USIM Application Toolkit (USAT)".
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
13
ETSI TS 131 102 V13.3.0 (2016-04)
[13]
3GPP TS 33.102: "3GPP Security; Security Architecture".
[14]
3GPP TS 33.103: "3GPP Security; Integration Guidelines".
[15]
3GPP TS 22.086: "Advice of charge (AoC) Supplementary Services - Stage 1".
[16]
3GPP TS 23.041: "Technical realization of Cell Broadcast (CB)".
[17]
3GPP TS 02.07: "Mobile Stations (MS) features".
[18]
3GPP TS 51.011 Release 4: "Specification of the Subscriber Identity Module – Mobile Equipment
(SIM – ME) interface".
[19]
ISO 639 (1988): "Code for the representation of names of languages".
[20]
ISO/IEC 7816-4: "Integrated circuit cards, Part 4: Organization, security and commands for
interchange".
[21]
Void.
[22]
ITU-T Recommendation E.164: "The international public telecommunication numbering plan".
[23]
3GPP TS 23.073: "Support of Localised Service Area (SoLSA); Stage 2".
[24]
3GPP TS 22.101: "Service aspects; service principles".
[25]
3GPP TS 23.003: "Numbering, Addressing and Identification".
[26]
Void.
[27]
3GPP TS 22.022: "Personalisation of Mobile Equipment (ME); Mobile functionality
specification".
[28]
3GPP TS 44.018 "Mobile Interface Layer3 Specification, Radio Resource control protocol".
[29]
3GPP TS 23.022: "Functions related to Mobile Station (MS) in idle mode and group receive
mode".
[30]
3GPP TS 23.057: "Mobile Execution Environment (MexE);Functional description; Stage 2".
[31]
3GPP TS 23.122: "NAS Functions related to Mobile Station (MS) in idle mode".
[32]
Void.
[33]
3GPP TS 25.101: "UE Radio Transmission and Reception (FDD)".
[34]
3GPP TS 45.005: "Radio Transmission and Reception".
[35]
ISO/IEC 8825-1 (2008): "Information technology – ASN.1 encoding rules : Specification of Basic
Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules
(DER)".
[36]
3GPP TS 23.097: "Multiple Subscriber Profile (MSP)".
[37]
Void.
[38]
3GPP TS 23.140 Release 6: "Multimedia Messaging Service (MMS); Functional description; stage
2".
[39]
ETSI TS 102 222 V7.1.0: "Administrative commands for telecommunications applications".
[40]
3GPP TS 24.234: "3GPP System to WLAN Interworking; UE to Network protocols;Stage 3".
[41]
3GPP TS 33.234: "3G Security; Wireless Local Area Network (WLAN) interworking security".
[42]
3GPP TS 33.220: "Generic Authentication Architecture (GAA); Generic bootstrapping
architecture".
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
14
ETSI TS 131 102 V13.3.0 (2016-04)
[43]
3GPP TS 33.246: "Security of Multimedia Broadcast/Multicast Service".
[44]
3GPP TS 43.020: "Technical Specification Group Services and system Aspects; Security related
network functions"
[45]
3GPP2 X.S0016-000-A v1.0: "3GPP2 Multimedia Messaging System MMS Specification
Overview, Revision A"
[46]
3GPP TS 43.068: "Technical Specification Group Core Network; Voice Group Call Service
(VGCS); Stage 2".
[47]
3GPP TS 33.110: "Key establishment between a Universal Integrated Circuit Card (UICC) and a
terminal".
[48]
IETF RFC 3629 (2003): "UTF-8, a transformation format of ISO 10646".
[49]
Open Mobile Alliance; OMA-TS-BCAST_SvcCntProtection
URL: http://www.openmobilealliance.org/
[50]
ETSI TS TS 102 483 V8.1.0: "UICC-Terminal interface; Internet Protocol connectivity between
UICC and Terminal".
[51]
3GPP TS 24.301: "Technical Specification Group Core Network and Terminals; Non-AccessStratum (NAS) protocol for Evolved Packet Systems (EPS): Stage 3".
[52]
3GPP TS 33.401: "3GPP System Architecture Evolution (SAE); Security architecture".
[53]
3GPP2 C.S0074-A v1.0: "UICC-Terminal Interface Physical and Logical Characteristics for
cdma2000 Spread Spectrum Systems"
[54]
3GPP TS 22.220: "Service requirements for Home NodeBs and Home eNodeBs ".
[55]
3GPP TS 24.341: "Support of SMS over IP networks; Stage 3"
[56]
IETF RFC 3261: "SIP: Session Initiation Protocol".
[57]
IETF RFC 3629 (2003): "UTF-8, a transformation format of ISO 10646".
[58]
3GPP TS 24.285: "Allowed Closed Subscriber Group (CSG) list; Management Object (MO)"
[59]
OMA Smartcard-Web-Server Approved Version 1.1 - 12 May 2009
(OMA-TS-Smartcard_Web_Server-V1_1-20090512-A).[60] ISO/IEC 15948:2003: "Information
technology - Computer graphics and image processing - Portable Network Graphics (PNG):
Functional specification".
[61]
IETF RFC 2046: "Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types".
NOTE:
Available from http://www.ietf.org/rfc/rfc2046.txt.
[62]
ETSI TS 101 220 : "Smart Cards; ETSI numbering system for telecommunication application
providers".
[63]
3GPP TS 24.229: "IP multimedia call control protocol based on Session Initiation Protocol (SIP)
and Session Description Protocol (SDP); Stage 3"
[64]
3GPP TS 31.103: "Characteristics of the IP Multimedia Services Identity Module (ISIM)
application".
[65]
3GPP TS 24.368: "Non-Access Stratum (NAS) configuration Management Object (MO)".
[66]
ETSI TS 102 484 V10.1.0: ''Smart Cards; Secure channel between a UICC and end-point terminal"
[67]
ISO/IEC 7816-15:2004: "Identification cards -- Integrated circuit cards -- Part 15: Cryptographic
information application"
[68]
3GPP TS 22.268: "Public Warning System (PWS) Requirements".
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
15
ETSI TS 131 102 V13.3.0 (2016-04)
[69]
3GPP TS 23.401: "General Packet Radio Service (GPRS) enhancements for Evolved Universal
Terrestrial Radio Access Network (E-UTRAN) access"
[70]
3GPP TS 24.334: "Proximity-services (ProSe) User Equipment (UE) to Proximity-services
(ProSe) Function Protocol aspects; Stage 3".
[71]
3GPP TS 24.333: "Proximity-services (ProSe) Management Objects (MO)"
[72]
3GPP TS 33.303: "Proximity-based Services (ProSe); Security aspects"
[73]
3GPP TS 23.303: "Proximity-based services (ProSe); Stage 2"
[74]
3GPP TS 36.331: "Evolved Universal Terrestrial Radio Access (E-UTRA); Radio Resource
Control (RRC); Protocol specification"
[75]
3GPP TS 23.032: " Technical Specification Group Services and System Aspects; Universal
Geographical Area Description (GAD)"
[76]
3GPP TS 33.187: "Security aspects of Machine-Type Communications (MTC) and other mobile
data applications communications enhancements"
[77]
3GPP TS 32.277: "Proximity-based Services (ProSe) charging"
[78]
3GPP TS 23.682: "Technical Specification Group Services and System Aspects; Architecture
enhancements to facilitate communications with packet data networks and applications"
[79]
3GPP TS 24.302: "Access to the 3GPP Evolved Packet Core (EPC) via non-3GPP access
networks".
[80]
IETF RFC 4122: "A Universally Unique IDentifier (UUID) URN Namespace".
[81]
3GPP TS 24.105: "Application specific Congestion control for Data Communication (ACDC)
Management Object (MO)".
[82]
3GPP TS 24.383: "Mission Critical Push To Talk (MCPTT) Management Object (MO)".
[83]
3GPP TS 23.179: "Functional architecture and information flows to support mission critical
communication services".
[84]
GSMA: "IMEI Allocation and Approval Process Version 9.0"
3
Definitions, symbols, abbreviations and coding
conventions
3.1
Definitions
For the purposes of the present document, the following definition applies.
ADM: access condition to an EF which is under the control of the authority which creates this file.
Allocation of these levels and the respective requirements for their fulfilment are the responsibility of the
appropriate administrative authority
The definition of access condition ADM does not preclude the administrative authority from using ALW, PIN,
PIN2 and NEV if required.
A terminal does not need to evaluate access conditions indicated as ADM in the present document.
PIN/ADM: A terminal is required to evaluate the access condition and verify it in order to access the EF if the access
condition is set to PIN or PIN2.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
16
ETSI TS 131 102 V13.3.0 (2016-04)
EHPLMN: represents the Equivalent HPLMNs for network selection purposes. The behaviour of EHPLMNs is defined
in TS 23.122 [31].
3.2
Symbols
For the purposes of the present document, the following symbols apply:
||
⊕
f1
f1*
f2
f3
f4
f5
3.3
Concatenation
Exclusive OR
Message authentication function used to compute MAC
A message authentication code (MAC) function with the property that no valuable information can
be inferred from the function values of f1* about those of f1, ..., f5 and vice versa
Message authentication function used to compute RES and XRES
Key generating function used to compute CK
Key generating function used to compute IK
Key generating function used to compute AK
Abbreviations
For the purposes of the present document, the following abbreviations apply:
3GPP
AC
ACDC
ACL
ADF
AID
AK
ALW
AMF
AoC
APN
ASME
ASN.1
AuC
AUTN
BDN
BER-TLV
B-TID
CCP
CK
CLI
CNL
CPBCCH
CS
DCK
DF
DO
eDRX
EF
ePDG
EPS
FCP
FFS
FQDN
GSM
HE
HNB
HeNB
IARI
ICC
3rd Generation Partnership Project
Access Condition
Application specific Congestion control for Data Communication
APN Control List
Application Dedicated File
Application Identifier
Anonymity key
ALWays
Authentication Management Field
Advice of Charge
Access Point Name
Access Security Management Entity
Abstract Syntax Notation One
Authentication Centre
Authentication token
Barred Dialling Number
Basic Encoding Rule - TLV
Bootstrapping Transaction Identifier
Capability Configuration Parameter
Cipher key
Calling Line Identifier
Co-operative Network List
COMPACT Packet BCCH
Circuit switched
Depersonalisation Control Keys
Dedicated File
Data Object
Extended Discontinuous Reception
Elementary File
Evolved Packet Data Gateway
Evolved Packet System
File Control Parameters
For Further Study
Full Qualified Domain Name
Global System for Mobile communications
Home Environment
Home NodeB
Home eNodeB
IMS Application Reference Identifier
Integrated Circuit Card
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
ICE
ICI
ICT
ID
Idi
Idr
IEI
IK
IMSI
K
KC
KSI
LI
LSB
MAC
MAC-A
MAC-I
MBMS
MCC
MCPTT
MexE
MF
MGV-F
MIKEY
MM
MMI
MMS
MMSS
MNC
MODE
MSB
MSK
MTK
MUK
NEV
NPI
OCI
OCT
PBID
PGK
PIN
PL
PS
PS_DO
PSM
PTK
RAND
RANDMS
RES
RFU
RST
SDN
SE
SEQp
SFI
SGSN
SN
SQN
SRES
SW
TLV
USAT
17
In Case of Emergency
Incoming Call Information
Incoming Call Timer
Identifier
Identity of the initiator
Identity of the responder
Information Element Identifier
Integrity key
International Mobile Subscriber Identity
USIM Individual key
Cryptographic key used by the cipher A5
Key Set Identifier
Language Indication
Least Significant Bit
Message authentication code
MAC used for authentication and key agreement
MAC used for data integrity of signalling messages
Multimedia Broadcast/Multicast Service
Mobile Country Code
Mission Critical Push To Talk
Mobile Execution Environment
Master File
MTK Generation and Validation Function
Multimedia Internet KEYing
Multimedia Message
Man Machine Interface
Multimedia Messaging Service
MultiMode System Selection
Mobile Network Code
Indication packet switched/circuit switched mode
Most Significant Bit
MBMS Service Key
MBMS Traffic Key
MBMS User Key
NEVer
Numbering Plan Identifier
Outgoing Call Information
Outgoing Call Timer
Phonebook Identifier
ProSe Group Key
Personal Identification Number
Preferred Languages
Packet switched
PIN Status Data Object
Power Saving Mode
ProSe Traffic Key
Random challenge
Random challenge stored in the USIM
User response
Reserved for Future Use
Reset
Service dialling number
Security Environment
Sequence number for MGV-F stored in the USIM
Short EF Identifier
Serving GPRS Support Node
Serving Network
Sequence number
Signed RESponse calculated by a USIM
Status Word
Tag Length Value
USIM Application Toolkit
ETSI
ETSI TS 131 102 V13.3.0 (2016-04)
3GPP TS 31.102 version 13.3.0 Release 13
USIM
VLR
WLAN
WSID
XRES
3.4
18
ETSI TS 131 102 V13.3.0 (2016-04)
Universal Subscriber Identity Module
Visitor Location Register
Wireless Local Area Network
WLAN Specific Identifier
Expected user RESponse
Coding Conventions
The following coding conventions apply to the present document.
All lengths are presented in bytes, unless otherwise stated. Each byte is represented by bits b8 to b1, where b8 is the
most significant bit (MSB) and b1 is the least significant bit (LSB). In each representation, the leftmost bit is the MSB.
The coding of Data Objects in the present document is according to TS 31.101 [11].
'XX':
4
Single quotes indicate hexadecimal values. Valid elements for hexadecimal values are the numbers
'0' to '9' and 'A' to 'F'.
Contents of the Files
This clause specifies the Efs for the 3GPP session defining access conditions, data items and coding. A data item is a
part of an EF which represents a complete logical entity, e.g. the alpha tag in an EFADN record.
A file is associated with attributes that depending of the file type indicates how data is to be accessed e.g. file size,
record length etc. Although in the present document some files and data items stored in a file are indicated as having a
fixed length; when reading such structures the terminal shall derive the length of the data item from the attributes
provided in the file information i.e. not use the fixed value specified for the file in the present document. Although the
terminal is able to read the entire structure it should only use those elements in the data item which is recognised by the
terminal.
For any EF, when the SFI is not indicated in the description of the file it is not allowed to assign an SFI. If in the
description of the file an SFI value is indicated the file shall support SFI. The SFI value shall be assigned by the card
issuer. It is mandatory for Efs stating an SFI value ('YY') in the description of their structure to provide an SFI. For files
where in the file description the SFI is indicated as 'Optional' the file may support an SFI.
For an overview containing all files see figures 4.1 and 4.2.
4.1
Contents of the EFs at the MF level
The EFs at the Master File (MF) level are specified in TS 31.101 [11].
The information in EFPL may be used by the ME for MMI purposes.
This information may also be used for the screening of Cell Broadcast messages in a preferred language, as follows.
When the CB Message Identifier capability is available, the ME selects only those CB messages the language of which
corresponds to an entry in this EF or in EFLI, whichever of these Efs is used (see clause 5.1.1). The CB message
language is defined by the Data Coding Scheme (see TS 23.038 [5]) received with the CB message. The ME shall be
responsible for translating the language coding indicated in the Data Coding Scheme for the Cell Broadcast Service (as
defined in TS 23.038 [5]) to the language coding as defined in ISO 639 [19] if it is necessary to check the language
coding in EFPL.
4.2
Contents of files at the USIM ADF (Application DF) level
The Efs in the USIM ADF contain service and network related information.
The File Ids '6F1X' (for Efs), '5F1X' and '5F2X' (for DFs) with X ranging from '0' to 'F' are reserved under the USIM
ADF for administrative use by the card issuer.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
4.2.1
19
ETSI TS 131 102 V13.3.0 (2016-04)
EFLI (Language Indication)
This EF contains the codes for one or more languages. This information, determined by the user/operator, defines the
preferred languages of the user in order of priority. This information may be used by the ME for MMI purposes. This
information may also be used for the screening of Cell Broadcast messages in a preferred language, as follows.
When the CB Message Identifier capability is available, the ME selects only those CB messages the language of which
corresponds to an entry in this EF or in EFPL, whichever of these Efs is used (see clause 5.1.1). The CB message
language is defined by the Data Coding Scheme (DCS: see TS 23.038 [5]) received with the CB message. The ME shall
be responsible for translating the language coding indicated in the Data Coding Scheme for the Cell Broadcast Service
(as defined in TS 23.038 [5]) to the language coding as defined in ISO 639 [19] if it is necessary to check the language
coding in EFPL.
Identifier: '6F 05'
SFI: '02'
File size: 2n bytes, (n ≥ 1)
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Structure: transparent
Optional
Update activity: low
ALW
PIN
ADM
ADM
Bytes
1 to 2
3 to 4
Description
st
1 language code (highest priority).
nd
2 language code
2n-1 to 2n
N language code (lowest priority).
th
M/O
M
O
Length
2 bytes
2 bytes
O
2 bytes
Coding:
each language code is a pair of alpha-numeric characters, defined in ISO 639 [19]. Each alpha-numeric character
shall be coded on one byte using the SMS default 7-bit coded alphabet as defined in TS 23.038 [5] with bit 8 set
to 0.
Unused language entries shall be set to 'FF FF'.
4.2.2
EFIMSI (IMSI)
This EF contains the International Mobile Subscriber Identity (IMSI).
Identifier: '6F07'
SFI: '07'
File size: 9 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2 to 9
Structure: transparent
Mandatory
Update activity: low
PIN
ADM
ADM
ADM
Description
Length of IMSI
IMSI
M/O
M
M
Length
1 byte
8 bytes
- Length of IMSI
Contents:
- the length indicator refers to the number of significant bytes, not including this length byte, required for the IMSI.
Coding:
- according to TS 24.008 [9].
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
20
ETSI TS 131 102 V13.3.0 (2016-04)
- IMSI
Contents:
- International Mobile Subscriber Identity.
Coding:
- this information element is of variable length. If a network operator chooses an IMSI of less than 15 digits, unused
nibbles shall be set to 'F'.
Byte 2:
b8
B7
b6
B5
b4
b3
b2
b1
1
0
0
Parity
LSB of Digit 1
:
:
MSB of Digit 1
For the parity bit, see TS 24.008 [9].
Byte 3:
b8
b7
b6
B5
b4 b3
b2
b1
LSB
:
:
MSB
LSB
:
:
MSB
of Digit 2
of Digit 2
of Digit 3
of Digit 3
etc.
4.2.3
EFKeys (Ciphering and Integrity Keys)
This EF contains the ciphering key CK, the integrity key IK and the key set identifier KSI.
Identifier: '6F08'
SFI: '08'
File size: 33 bytes
Structure: transparent
Update activity: high
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2 to 17
18 to 33
Mandatory
PIN
PIN
ADM
ADM
Description
Key set identifier KSI
Ciphering key CK
Integrity key IK
M/O
M
M
M
- Key Set Identifier KSI.
Coding:
b8
b7
b6
b5
b4
b3
b2
b1
KSI
bits b4 to b8 are coded 0
- Ciphering key CK.
Coding:
ETSI
Length
1 byte
16 bytes
16 bytes
3GPP TS 31.102 version 13.3.0 Release 13
21
ETSI TS 131 102 V13.3.0 (2016-04)
- the least significant bit of CK is the least significant bit of the 17th byte. The most significant bit of CK is the most
significant bit of the 2nd byte.
- Integrity key IK.
Coding:
- the least significant bit of IK is the least significant bit of the 33rd byte. The most significant bit of IK is the most
significant bit of the 18th byte.
4.2.4
EFKeysPS (Ciphering and Integrity Keys for Packet Switched domain)
This EF contains the ciphering key CKPS, the integrity key IKPS and the key set identifier KSIPS for the packet
switched (PS) domain.
Identifier: '6F09'
SFI: '09'
File size: 33 bytes
Structure: transparent
Update activity: high
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2 to 17
18 to 33
Mandatory
PIN
PIN
ADM
ADM
Description
Key set identifier KSIPS
Ciphering key CKPS
Integrity key IKPS
M/O
M
M
M
Length
1 byte
16 bytes
16 bytes
- Key Set Identifier KSIPS.
Coding:
b8
b7
b6
b5
b4
b3
b2
b1
KSIPS
bits b4 to b8 are coded 0
- Ciphering key CKPS.
Coding:
- the least significant bit of CKPS is the least significant bit of the 17th byte. The most significant bit of CKPS is the
most significant bit of the 2nd byte.
- Integrity key IKPS.
Coding:
- the least significant bit of IKPS is the least significant bit of the 33rd byte. The most significant bit of IKPS is the
most significant bit of the 18th byte.
4.2.5
EFPLMNwAcT (User controlled PLMN selector with Access Technology)
If service n° 20 is "available", this file shall be present.
This EF contains the coding for n PLMNs, where n is at least eight. This information is determined by the user and
defines the preferred PLMNs of the user in priority order. The first record indicates the highest priority and the nth
record indicates the lowest. The EF also contains the Access Technologies for each PLMN in this list. (see
TS 23.122 [31])
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
22
Identifier: '6F60'
SFI: '0A'
File size: 5n (where n ≥8 bytes)
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 3
4 to 5
6 to 8
9 to 10
:
36 to 38
39 to 40
41 to 43
44 to 45
:
(5n-4) to (5n-2)
(5n-1) to 5n
ETSI TS 131 102 V13.3.0 (2016-04)
Structure: transparent
Optional
Update activity: low
PIN
PIN
ADM
ADM
Description
st
1 PLMN (highest priority)
st
1 PLMN Access Technology Identifier
nd
2 PLMN
nd
2 PLMN Access Technology Identifier
:
th
8 PLMN
th
8 PLMN Access Technology Identifier
th
9 PLMN
th
9 PLMN Access Technology Identifier
:
th
N PLMN (lowest priority)
th
N PLMN Access Technology Identifier
M/O
M
M
M
M
Length
3 bytes
2 bytes
3 bytes
2 bytes
M
M
O
O
3 bytes
2 bytes
3 bytes
2 bytes
O
O
3 bytes
2 bytes
- PLMN
Contents:
- Mobile Country Code (MCC) followed by the Mobile Network Code (MNC).
Coding:
- according to TS 24.008 [9].
- Access Technology Identifier:
Coding:
- 2 bytes are used to select the access technology where the meaning of each bit is as follows:
- bit = 1: access technology selected;
- bit = 0: access technology not selected.
Byte5n-1:
b8
b7
b6
b5
b4
b3
b2
b1
RFU
RFU
RFU
RFU
RFU
RFU
E-UTRAN
UTRAN
Byte 5n:
b8
b7
b6
b5
b4
b3
b2
b1
RFU
RFU
RFU
RFU
cdma2000 1xRTT
cdma2000 HRPD
GSM COMPACT
GSM
4.2.6
EFHPPLMN (Higher Priority PLMN search period)
This EF contains the interval of time between searches for a higher priority PLMN (see TS 22.011 [2]).
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
23
Identifier: '6F31'
SFI: '12'
File size: 1 byte
Structure: transparent
Mandatory
Update activity: low
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
ETSI TS 131 102 V13.3.0 (2016-04)
PIN
ADM
ADM
ADM
Description
M/O
M
Time interval
Length
1 byte
- Time interval.
Contents:
the time interval between two searches.
Coding:
the time interval is coded in integer multiples of n minutes. The range is from n minutes to a maximum value. The
value '00' indicates that no attempts shall be made to search for any higher priority PLMN. The encoding is:
-
'00':
'01':
'02':
:
'YZ':
No higher priority PLMN search attempts;
n minutes;
2n minutes;
:
(16Y+Z)n minutes (maximum value).
All other values shall be interpreted by the ME as a default period.
For specification of the integer timer interval n, the maximum value and the default period refer to TS 22.011 [2].
4.2.7
EFACMmax (ACM maximum value)
If service n° 13 is "available", this file shall be present.
This EF contains the maximum value of the accumulated call meter.
Identifier: '6F37'
File size: 3 bytes
Structure: transparent
Optional
Update activity: low
Access Conditions:
READ
UPDATE
PIN
PIN/PIN2
(fixed during administrative management)
ADM
ADM
DEACTIVATE
ACTIVATE
Bytes
1 to 3
Description
M/O
M
Maximum value
- Maximum value.
Contents:
- maximum value of the Accumulated Call Meter (ACM).
Coding:
First byte:
b8
b7
b6
b5
b4
b3
b2
b1
223
222
221
220
219
218
217
216
Second byte:
ETSI
Length
3 bytes
3GPP TS 31.102 version 13.3.0 Release 13
24
b8
b7
b6
b5
b4
b3
b2
b1
215
214
213
212
211
210
29
28
b8
b7
b6
b5
b4
b3
b2
b1
27
26
25
24
23
22
21
20
ETSI TS 131 102 V13.3.0 (2016-04)
Third byte:
For instance, '00' '00' '30' represents 25+24.
All ACM data is stored in the USIM and transmitted over the USIM/ME interface as binary.
ACMmax is not valid, as defined in TS 22.024 [3], if it is coded '000000'.
If a GSM application is present on the UICC and the ACMmax value is to be shared between the GSM and the USIM
application this file shall be shared between the two applications.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
4.2.8
25
ETSI TS 131 102 V13.3.0 (2016-04)
EFUST (USIM Service Table)
This EF indicates which services are available. If a service is not indicated as available in the USIM, the ME shall not
select this service.
Identifier: '6F38'
SFI: '04'
File size: X bytes, (X ≥ 1)
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2
3
4
etc.
X
-Services
Contents:
Structure: transparent
Update activity: low
PIN
ADM
ADM
ADM
Description
Services n°1 to n°8
Services n°9 to n°16
Services n°17 to n°24
Services n°25 to n°32
Services n°(8X-7) to n°(8X)
Service n°1:
Service n°2:
Service n°3:
Service n°4:
Service n°5:
Service n°6:
Service n°7:
Service n°8:
Service n°9:
Service n°10:
Service n°11:
Service n°12:
Service n°13:
Service n°14:
Service n°15:
Service n°16:
Service n°17:
Service n°18:
Service n°19:
Service n°20:
Service n°21:
Service n°22:
Service n°23:
Service n°24:
Service n°25:
Service n°26:
Service n°27:
Service n°28:
Service n°29:
Service n°30:
Service n°31:
Service n°32:
Service n°33:
Service n°34:
Service n°35:
Service n°36:
Service n°37:
Service n°38:
Service n°39:
Service n°40:
Service n°41:
Mandatory
M/O
M
O
O
O
Length
1 byte
1 byte
1 byte
1 byte
O
1 byte
Local Phone Book
Fixed Dialling Numbers (FDN)
Extension 2
Service Dialling Numbers (SDN)
Extension3
Barred Dialling Numbers (BDN)
Extension4
Outgoing Call Information (OCI and OCT)
Incoming Call Information (ICI and ICT)
Short Message Storage (SMS)
Short Message Status Reports (SMSR)
Short Message Service Parameters (SMSP)
Advice of Charge (AoC)
Capability Configuration Parameters 2 (CCP2)
Cell Broadcast Message Identifier
Cell Broadcast Message Identifier Ranges
Group Identifier Level 1
Group Identifier Level 2
Service Provider Name
User controlled PLMN selector with Access Technology
MSISDN
Image (IMG)
Support of Localised Service Areas (SoLSA)
Enhanced Multi-Level Precedence and Pre-emption Service
Automatic Answer for eMLPP
RFU
GSM Access
Data download via SMS-PP
Data download via SMS-CB
Call Control by USIM
MO-SMS Control by USIM
RUN AT COMMAND command
shall be set to '1'
Enabled Services Table
APN Control List (ACL)
Depersonalisation Control Keys
Co-operative Network List
GSM security context
CPBCCH Information
Investigation Scan
MexE
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
Service n°42:
Service n°43:
Service n°44:
Service n°45:
Service n°46:
Service n°47:
Service n°48:
Service n°49:
Service n°50:
Service n°51:
Service n°52
Service n°53
Service n°54
Service n°55
Service n°56
Service n°57
Service n°58
Service n°59
Service n°60
Service n°61
Service n°62
Service n°63
Service n°64
Service n°65
Service n°66
Service n°67
Service n°68
Service n°69
Service n°70
Service n°71
Service n°72
Service n°73
Service n°74
Service n°75
Service n°76
Service n°77
Service n°78
Service n°79
Service n°80
Service n°81
Service n°82
Service n°83
Service n°84
Service n°85
Service n°86
Service n°87
Service n°88
Service n°89
Service n°90
Service n°91
Service n°92
Service n°93
Service n°94
Service n°95
Service n°96
Service n°97
Service n°98
Service n°99
Service n°100
Service n°101
Service n°102
Service n°103
Service n°104
Service n°105
Service n°106
Service n°107
Service n°108
Service n°109
Service n°110
26
ETSI TS 131 102 V13.3.0 (2016-04)
Operator controlled PLMN selector with Access Technology
HPLMN selector with Access Technology
Extension 5
PLMN Network Name
Operator PLMN List
Mailbox Dialling Numbers
Message Waiting Indication Status
Call Forwarding Indication Status
Reserved and shall be ignored
Service Provider Display Information
Multimedia Messaging Service (MMS)
Extension 8
Call control on GPRS by USIM
MMS User Connectivity Parameters
Network's indication of alerting in the MS (NIA)
VGCS Group Identifier List (EFVGCS and EFVGCSS)
VBS Group Identifier List (EFVBS and EFVBSS)
Pseudonym
User Controlled PLMN selector for I-WLAN access
Operator Controlled PLMN selector for I-WLAN access
User controlled WSID list
Operator controlled WSID list
VGCS security
VBS security
WLAN Reauthentication Identity
Multimedia Messages Storage
Generic Bootstrapping Architecture (GBA)
MBMS security
Data download via USSD and USSD application mode
Equivalent HPLMN
Additional TERMINAL PROFILE after UICC activation
Equivalent HPLMN Presentation Indication
Last RPLMN Selection Indication
OMA BCAST Smart Card Profile
GBA-based Local Key Establishment Mechanism
Terminal Applications
Service Provider Name Icon
PLMN Network Name Icon
Connectivity Parameters for USIM IP connections
Home I-WLAN Specific Identifier List
I-WLAN Equivalent HPLMN Presentation Indication
I-WLAN HPLMN Priority Indication
I-WLAN Last Registered PLMN
EPS Mobility Management Information
Allowed CSG Lists and corresponding indications
Call control on EPS PDN connection by USIM
HPLMN Direct Access
eCall Data
Operator CSG Lists and corresponding indications
Support for SM-over-IP
Support of CSG Display Control
Communication Control for IMS by USIM
Extended Terminal Applications
Support of UICC access to IMS
Non-Access Stratum configuration by USIM
PWS configuration by USIM
RFU
URI support by UICC
Extended EARFCN support
ProSe
USAT Application Pairing
Media Type support
IMS call disconnection cause
URI support for MO SHORT MESSAGE CONTROL
ePDG configuration Information support
ePDG configuration Information configured
ACDC support
MCPTT
ePDG configuration Information for Emergency Service support
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
Service n°111
27
ETSI TS 131 102 V13.3.0 (2016-04)
ePDG configuration Information for Emergency Service configured
The EF shall contain at least one byte. Further bytes may be included, but if the EF includes an optional byte, then it is
mandatory for the EF to also contain all bytes before that byte. Other services are possible in the future and will be
coded on further bytes in the EF. The coding falls under the responsibility of the 3GPP.
Service n°46 can only be declared "available" if service n°45 is declared "available".
Service n°95 and n°99 shall not be declared "available" if an ISIM application is present on the UICC.
Coding:
1 bit is used to code each service:
bit = 1: service available;
bit = 0: service not available.
-
Service available means that the USIM has the capability to support the service and that the service is available
for the user of the USIM unless the service is identified as "disabled" in EFEST.
Service not available means that the service shall not be used by the USIM user, even if the USIM has the
capability to support the service.
First byte:
b8
b7
b6
B5
B4
b3
b2
b1
Service
Service
Service
Service
Service
Service
Service
Service
n°1
n°2
n°3
n°4
n°5
n°6
n°7
n°8
Service
Service
Service
Service
Service
Service
Service
Service
n°9
n°10
n°11
n°12
n°13
n°14
n°15
n°16
Second byte:
b8
b7
b6
B5
B4
b3
b2
b1
etc.
4.2.9
EFACM (Accumulated Call Meter)
If service n° 13 is "available", this file shall be present.
This EF contains the total number of units for both the current call and the preceding calls.
NOTE:
The information may be used to provide an indication to the user for advice or as a basis for the
calculation of the monetary cost of calls (see TS 22.086 [15]).
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
28
Identifier: '6F39'
SFI: Optional
Record length: 3 bytes
Access Conditions:
READ
UPDATE
INCREASE
DEACTIVATE
ACTIVATE
ETSI TS 131 102 V13.3.0 (2016-04)
Structure: cyclic
Optional
Update activity: high
PIN
PIN/PIN2
(fixed during administrative management)
PIN
ADM
ADM
Bytes
Description
M/O
Length
1 to 3
Accumulated count of units
M
3 bytes
NOTE:
If a SFI is assigned, the recommended value is "1C". However cards may exist
that indicate another value. Therefore the terminal shall be able to handle other
values.
- Accumulated count of units
Contents:
value of the ACM.
Coding:
see the coding of EFACMmax.
If a GSM application is present on the UICC and the ACM value is to be shared between the GSM and the USIM
application this file shall be shared between the two applications.
4.2.10
EFGID1 (Group Identifier Level 1)
If service n° 17 is "available", this file shall be present.
This EF contains identifiers for particular USIM-ME associations. It can be used to identify a group of USIMs for a
particular application.
Identifier: '6F3E'
File size: n bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to n
4.2.11
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
USIM group identifier(s)
EFGID2 (Group Identifier Level 2)
If service n° 18 is "available", this file shall be present.
ETSI
M/O
O
Length
n bytes
3GPP TS 31.102 version 13.3.0 Release 13
29
ETSI TS 131 102 V13.3.0 (2016-04)
This EF contains identifiers for particular USIM-ME associations. It can be used to identify a group of USIMs for a
particular application.
Identifier: '6F3F'
File size: n bytes
Structure: transparent
Optional
Update activity: low
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to n
NOTE:
4.2.12
PIN
ADM
ADM
ADM
Description
USIM group identifier(s)
M/O
O
Length
n bytes
The structure of EFGID1 and EFGID2 is identical. They are provided to allow the network operator to
enforce different levels of security dependant on an application.
EFSPN (Service Provider Name)
If service n° 19 is "available", this file shall be present.
This EF contains the service provider name in text format and appropriate requirements for the display by the ME. The
service provider name may also be provided in a graphical format in EFSPNI. The ME shall use the service provider
name in the text format or the graphical format or both to display the service provider name according to the rules
defined in section 4.2.88.
Identifier: '6F46'
File Size: 17 bytes
Structure: transparent
Optional
Update activity: low
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2 to 17
ALWAYS
ADM
ADM
ADM
Description
Display Condition
Service Provider Name
M/O
M
M
Length
1 byte
16 bytes
- Display Condition
Contents: display condition for the service provider name in respect to the registered PLMN (see TS 22.101 [24]).
Coding:
b8
b7
b6
b5
b4
b3
b2
b1
b1=0: display of registered PLMN name not required
when registered PLMN is either HPLMN or a PLMN in
the service provider PLMN list (see EFSPDI).
B1=1: display of registered PLMN name required when
registered PLMN is either HPLMN or a PLMN in the
service provider PLMN list(see EFSPDI).
B2=0: display of the service provider name is
required when registered PLMN is neither HPLMN nor a
PLMN in the service provider PLMN list(see EFSPDI).
B2=1: display of the service provider name is not
required when registered PLMN is neither HPLMN nor a
PLMN in the service provider PLMN list(see EFSPDI).
RFU (see TS 31.101)
- Service Provider Name
Contents:
service provider string
Coding:
the string shall use:
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
-
4.2.13
30
ETSI TS 131 102 V13.3.0 (2016-04)
either the SMS default 7-bit coded alphabet as defined in TS 23.038 [5] with bit 8 set to 0. The string
shall be left justified. Unused bytes shall be set to 'FF'.
or one of the UCS2 code options defined in the annex of TS 31.101 [11].
EFPUCT (Price per Unit and Currency Table)
If service n° 13 is "available", this file shall be present.
This EF contains the Price per Unit and Currency Table (PUCT). The PUCT is Advice of Charge related information
which may be used by the ME in conjunction with EFACM to compute the cost of calls in the currency chosen by the
subscriber, as specified in TS 22.024 [3].
Identifier: '6F41'
File size: 5 bytes
Structure: transparent
Optional
Update activity: low
Access Conditions:
READ
UPDATE
PIN
PIN/PIN2
(fixed during administrative management)
ADM
ADM
DEACTIVATE
ACTIVATE
Bytes
1 to 3
4 to 5
Description
M/O
M
M
Currency code
Price per unit
Length
3 bytes
2 bytes
- Currency code
Contents:
the alpha-identifier of the currency code.
Coding:
bytes 1, 2 and 3 are the respective first, second and third character of the alpha identifier. This alpha-tagging shall
use the SMS default 7-bit coded alphabet as defined in TS 23.038 [5] with bit 8 set to 0.
- Price per unit
Contents:
price per unit expressed in the currency coded by bytes 1 to 3.
Coding:
byte 4 and bits b1 to b4 of byte 5 represent the Elementary Price per Unit (EPPU) in the currency coded by bytes 1
to 3. Bits b5 to b8 of byte 5 are the decimal logarithm of the multiplicative factor represented by the absolute value of
its decimal logarithm (EX) and the sign of EX, which is coded 0 for a positive sign and 1 for a negative sign.
Byte 4:
b8
b7
b6
b5
b4
B3
b2
b1
211
210
29
28
27
26
25
24
of EPPU
Byte 5:
b8
b7
b6
b5
b4
b3
b2
b1
23
22
21
20 of EPPU
Sign of EX
20 of Abs(EX)
21 of Abs(EX)
22 of Abs(EX)
-
The computation of the price per unit value is made by the ME in compliance with TS 22.024 [3] by the
following formula:
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
31
ETSI TS 131 102 V13.3.0 (2016-04)
price per unit = EPPU * 10EX.
-
The price has to be understood as expressed in the coded currency.
If a GSM application is present on the UICC and the PUCT information is to be shared between the GSM and the
USIM application, then this file shall be shared between the two applications.
4.2.14
EFCBMI (Cell Broadcast Message identifier selection)
If service n° 15 is "available", this file shall be present.
This EF contains the Message Identifier Parameters which specify the type of content of the cell broadcast messages
that the subscriber wishes the UE to accept.
Any number of CB Message Identifier Parameters may be stored in the USIM. No order of priority is applicable.
Identifier: '6F45'
File size: 2 n bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 2
3 to 4
:
2n-1 to 2n
Structure: transparent
Optional
Update activity: low
PIN
PIN
ADM
ADM
Description
CB Message Identifier 1
CB Message Identifier 2
:
CB Message Identifier n
M/O
O
O
:
O
Length
2 bytes
2 bytes
:
2 bytes
- Cell Broadcast Message Identifier
Coding:
- as in TS 23.041 [16], "Message Format on BTS-MS Interface - Message Identifier";
- values listed show the types of message which shall be accepted by the UE;
- unused entries shall be set to 'FF FF'.
4.2.15
EFACC (Access Control Class)
This EF contains the assigned access control class(es). The access control class is a parameter to control the access
attempts. 15 classes are split into 10 classes randomly allocated to normal subscribers and 5 classes allocated to specific
high priority users. For more information see TS 22.011 [2].
Identifier: '6F78'
SFI: '06'
File size: 2 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 2
Structure: transparent
Mandatory
Update activity: low
PIN
ADM
ADM
ADM
Description
Access control classes
M/O
M
Length
2 bytes
- Access control classes
Coding:
- each ACC is coded on one bit. An ACC is "allocated" if the corresponding bit is set to 1 and "not allocated" if this
bit is set to 0. Bit b3 of byte 1 is set to 0.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
32
ETSI TS 131 102 V13.3.0 (2016-04)
Byte 1:
b8
b7
b6
b5
b4
b3
b2
b1
15
14
13
12
11
10
09
08
b8
b7
b6
b5
b4
b3
b2
b1
07
06
05
04
03
02
01
00
Number of the ACC (except for bit b3)
Byte 2:
4.2.16
Number of the ACC
EFFPLMN (Forbidden PLMNs)
This EF contains the coding for n Forbidden PLMNs (FPLMN). It is read by the ME as part of the USIM initialization
procedure and indicates PLMNs which the UE shall not automatically attempt to access.
A PLMN is written to the EF if a network rejects a Location Update with the cause "PLMN not allowed". The ME shall
manage the list as follows.
When n FPLMNs are held in the EF, and rejection of a further PLMN is received by the ME from the network, the ME
th
shall modify the EF using the UPDATE command. This new PLMN shall be stored in the n position, and the existing
list "shifted" causing the previous contents of the first position to be lost.
When less than n FPLMNs exist in the EF, storage of an additional FPLMN shall not cause any existing FPLMN to be
lost.
Dependent upon procedures used to manage storage and deletion of FPLMNs in the EF, it is possible, when less than n
FPLMNs exist in the EF, for 'FFFFFF' to occur in any position. The ME shall analyse all the EF for FPLMNs in any
position, and not regard 'FFFFFF' as a termination of valid data.
Identifier: '6F7B'
SFI: '0D'
File size: 3n bytes, (n≥ 4)
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 3
4 to 6
7 to 9
10 to 12
:
(3n-2) to 3n
Structure: transparent
Mandatory
Update activity: low
PIN
PIN
ADM
ADM
Description
PLMN 1
PLMN 2
PLMN 3
PLMN 4
:
PLMN n
M/O
M
M
M
M
:
O
Length
3 bytes
3 bytes
3 bytes
3 bytes
:
3 bytes
- PLMN
Contents:
Mobile Country Code (MCC) followed by the Mobile Network Code (MNC).
Coding:
according to TS 24.008 [9].
For instance, using 246 for the MCC and 81 for the MNC and if this is stored in PLMN 3 the contents is as follows:
Bytes 7 to 9: '42' 'F6' '18'.
If storage for fewer than n PLMNs is required, the unused bytes shall be set to 'FF'.
4.2.17
EFLOCI (Location Information)
This EF contains the following Location Information:
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
-
33
ETSI TS 131 102 V13.3.0 (2016-04)
Temporary Mobile Subscriber Identity (TMSI);
Location Area Information (LAI);
Location update status.
See clause 5.2.5 for special requirements when updating EFLOCI.
Identifier: '6F7E'
SFI: '0B'
File size: 11 bytes
Structure: transparent
Update activity: high
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 4
5 to 9
10
11
Mandatory
PIN
PIN
ADM
ADM
Description
TMSI
LAI
RFU
Location update status
M/O
M
M
M
M
Length
4 bytes
5 bytes
1 byte
1 byte
- TMSI
Contents:
Temporary Mobile Subscriber Identity.
Coding:
according to TS 24.008 [9].
B8
b7
b6
b5
b4
B3
b2
b1
b5
b4
b3
b2
b1
MSB
- LAI
Contents:
Location Area Information.
Coding:
according to TS 24.008 [9].
Byte 5: first byte of LAI
b8
b7
b6
MSB
- Location update status
Contents:
status of location update according to TS 24.008 [9].
Coding:
Byte 11:
Bits:
b3 b2 b1
0
0
0 : updated.
0
0
1 : not updated.
0
1
0 : PLMN not allowed.
0
1
1 : Location Area not allowed.
1
1
1 : reserved.
Bits b4 to b8 are RFU (see TS 31.101 [11]).
4.2.18
EFAD (Administrative Data)
This EF contains information concerning the mode of operation according to the type of USIM, such as normal (to be
used by PLMN subscribers for 3G operations), type approval (to allow specific use of the ME during type approval
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
34
ETSI TS 131 102 V13.3.0 (2016-04)
procedures of e.g. the radio equipment), cell testing (to allow testing of a cell before commercial use of this cell),
manufacturer specific (to allow the ME manufacturer to perform specific proprietary auto-test in its ME during e.g.
maintenance phases).
It also provides an indication about how some ME features shall work during normal operation as well as information
about the length of the MNC, which is part of the International Mobile Subscriber Identity (IMSI).
Identifier: '6FAD'
SFI: '03'
File size: 4+X bytes
Structure: transparent
Update activity: low
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2 to 3
4
5 to 4+X
Mandatory
ALW
ADM
ADM
ADM
Description
UE operation mode
Additional information
length of MNC in the IMSI
RFU
M/O
M
M
M
O
Length
1 byte
2 bytes
1 byte
X bytes
- UE operation mode:
Contents:
mode of operation for the UE
Coding:
Initial value
- '00' normal operation.
- '80' type approval operations.
- '01' normal operation + specific facilities.
- '81' type approval operations + specific facilities.
- '02' maintenance (off line).
- '04' cell test operation.
All other values are RFU
- Additional information:
Contents:
additional information depending on the UE operation mode
Coding:
- specific facilities (if b1=1 in byte 1):
Byte 2 (first byte of additional information):
b8
b7
b6
b5
b4
b3
b2
b1
RFU (see TS 31.101)
Byte 3 (second byte of additional information):
b8
b7
b6
b5
b4
b3
b2
b1
b1=0: ciphering indicator feature disabled
b1=1: ciphering indicator feature enabled
b2: CSG Display Control bit, see below
b3: ProSe services for Public Safety, see below
b4: extended DRX cycle
RFU (see TS 31.101)
b1 is used to control the ciphering indicator feature as specified in TS 22.101 [24].
b2 is used to indicate which CSGs the UE shall display during manual CSG selection. This bit
corresponds to the value of OperatorCSGEntries_Only leaf described in TS 24.285 [58]. This bit shall be
ignored when service n°92 is not "available".
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
35
ETSI TS 131 102 V13.3.0 (2016-04)
- b2=0: for every PLMN not included in EF_OCSGL, or for which a CSG display indicator tag is not
present, all available CSGs can be displayed without any restriction.
- b2=1: for every PLMN not included in EF_OCSGL or any PLMN for which a CSG display indicator
tag is not present, only the available CSGs found in the Operator CSG list shall be displayed.
b3 is used to indicate whether the USIM enables the Public Safety UE to use the ME provisioning
parameters for Public Safety usage, in the cases described in TS 24.334 [70].
- b3=0: the ME is not authorized for ProSe services for Public Safety usage (i.e. Direct Discovery and
Direct Communication as per TS 24.334 [70]) without contacting the ProSe Function.
- b3=1: the ME is authorized to use the parameters stored in the USIM or in the ME for ProSe services
for Public Safety usage, as described in TS 24.334 [70] without contacting the ProSe Function.
b4 is used to indicate whether the UICC polling interval to retrieve proactive commands can be modified
(as described in TS 31.101 [11]) or weather the UICC interface can be deactivated (as described in clause
5.1.11) during extended DRX cycle.
- b4=0: the ME is not authorized to modify the polling interval and/or disable the UICC interface
during extended DRX cycle.
- b4=1: the ME is authorized to modify the polling interval and/or disable the UICC interface during
extended DRX cycle.
- ME manufacturer specific information (if b2=1 in byte 1):
Byte 2 (first byte of additional information):
B8
b7
b6
B5
B4
b3
b2
b1
Any value
Byte 3 (second byte of additional information):
B8
b7
b6
b5
B4
b3
b2
b1
Any value
- Length of MNC in the IMSI:
Contents:
The length indicator refers to the number of digits, used for extracting the MNC from the IMSI
Coding:
Byte 4:
b8
b7
b6
b5
b4
b3
b2
b1
This value codes the number of digits of the MNC in
the IMSI. Only the values '0010' and '0011' are
currently specified, all other values are reserved
for future use.
RFU (see TS 31.101)
4.2.19
Void
4.2.20
EFCBMID (Cell Broadcast Message Identifier for Data Download)
If service n° 29 is "available", this file shall be present.
This EF contains the message identifier parameters which specify the type of content of the cell broadcast messages
which are to be passed to the USIM.
Any number of CB message identifier parameters may be stored in the USIM. No order of priority is applicable.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
36
Identifier: '6F48'
SFI: '0E'
File size: 2n bytes
Structure: transparent
Optional
Update activity: low
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 2
3 to 4
:
2n-1 to 2n
ETSI TS 131 102 V13.3.0 (2016-04)
PIN
ADM
ADM
ADM
Description
CB Message Identifier 1
CB Message Identifier 2
:
CB Message Identifier n
M/O
O
O
:
O
Length
2 bytes
2 bytes
:
2 bytes
- Cell Broadcast Message Identifier.
Coding:
- as in TS 23.041 [16]. Values listed show the identifiers of messages which shall be accepted by the UE to be passed
to the USIM.
Unused entries shall be set to 'FF FF'.
4.2.21
EFECC (Emergency Call Codes)
This EF contains emergency call codes.
Identifier: '6FB7'
SFI: '01'
Record size: X+4 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 3
4 to X+3
X+4
Structure: linear fixed
Mandatory
Update activity: low
ALW
ADM
ADM
ADM
Description
Emergency Call Code
Emergency Call Code Alpha Identifier
Emergency Service Category
M/O
M
O
M
Length
3 bytes
X bytes
1 byte
- Emergency Call Code.
Contents:
- Emergency Call Code.
Coding:
- the emergency call code is of a variable length with a maximum length of 6 digits. Each emergency call code is
coded on three bytes, with each digit within the code being coded on four bits as shown below. If a code of less than 6
digits is chosen, then the unused nibbles shall be set to 'F'.
Byte 1:
b8
b7
b6
b5
b4
b3
b2
b1
LSB
::
::
MSB
LSB
:
:
MSB
of Digit 1
of Digit 1
of Digit 2
of Digit 2
Byte 2:
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
b8
b7
b6
b5
b4
b3
37
b2
ETSI TS 131 102 V13.3.0 (2016-04)
b1
LSB
:
:
MSB
LSB
:
:
MSB
of Digit 3
LSB
:
:
MSB
LSB
:
:
MSB
of Digit 5
of Digit 3
of Digit 4
of Digit 4
Byte 3:
b8
b7
b6
b5
b4
b3
b2
b1
of Digit 5
of Digit 6
of Digit 6
- Emergency Call Code Alpha Identifier.
Contents:
Information about the dialled emergency number to be displayed to the user.
Coding:
this alpha-tagging shall use
either:
- the SMS default 7-bit coded alphabet as defined in TS 23.038 [5] with bit 8 set to 0. The alpha identifier shall
be left justified. Unused bytes shall be set to 'FF'.
Or
- one of the UCS2 coded options as defined in the annex of TS 31.101 [11].
- Emergency Service Category.
Contents:
Information to be sent to the network indicating the category of the emergency call.
Coding:
Coding according to TS 24.008 [9].
4.2.22
EFCBMIR (Cell Broadcast Message Identifier Range selection)
If service n° 16 is "available", this file shall be present.
This EF contains ranges of cell broadcast message identifiers that the subscriber wishes the UE to accept.
Any number of CB Message Identifier Parameter ranges may be stored in the USIM. No order of priority is applicable.
Identifier: '6F50'
File size: 4n bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 4
5 to 8
:
(4n-3) to 4n
Structure: transparent
Optional
Update activity: low
PIN
PIN
ADM
ADM
Description
CB Message Identifier Range 1
CB Message Identifier Range 2
:
CB Message Identifier Range n
ETSI
M/O
O
O
:
O
Length
4 bytes
4 bytes
:
4 bytes
3GPP TS 31.102 version 13.3.0 Release 13
38
ETSI TS 131 102 V13.3.0 (2016-04)
- Cell Broadcast Message Identifier Ranges.
Contents:
- CB Message Identifier ranges:
Coding:
- bytes one and two of each range identifier equal the lower value of a cell broadcast range, bytes three and four equal
the upper value of a cell broadcast range, both values are coded as in TS 23.041 [16] "Message Format on BTS-MS
Interface - Message Identifier". Values listed show the ranges of messages which shall be accepted by the UE.
Unused entries shall be set to 'FF FF FF FF'.
4.2.23
EFPSLOCI (Packet Switched location information)
This EF contains the following Location Information:
-
Packet Temporary Mobile Subscriber Identity (P-TMSI);
Packet Temporary Mobile Subscriber Identity signature value (P-TMSI signature value);
Routing Area Information (RAI);
Routing Area update status.
Identifier: '6F73'
SFI: '0C'
File size: 14 bytes
Structure: transparent
Update activity: high
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 4
5 to 7
8 to13
14
PIN
PIN
ADM
ADM
Description
P-TMSI
P-TMSI signature value
RAI
Routing Area update status
M/O
M
M
M
M
- P-TMSI.
Contents:
Packet Temporary Mobile Subscriber Identity.
Coding:
according to TS 24.008 [9].
Byte 1: first byte of P-TMSI
b8
b7
B6
B5
B4
B3
b2
b1
MSB
- P-TMSI signature value.
Contents:
Packet Temporary Mobile Subscriber Identity signature value.
Coding:
according to TS 24.008 [9].
Byte 5: first byte of P-TMSI signature value.
B8
b7
B6
Mandatory
B5
B4
B3
b2
b1
MSB
- RAI
Contents:
Routing Area Information.
ETSI
Length
4 bytes
3 bytes
6 bytes
1 byte
3GPP TS 31.102 version 13.3.0 Release 13
39
ETSI TS 131 102 V13.3.0 (2016-04)
Coding:
according to TS 24.008 [9].
Byte 8: first byte of RAI
b8
b7
b6
b5
b4
b3
b2
b1
MSB
- Routing Area update status.
Contents:
status of routing area update according to TS 24.008 [9].
Coding:
byte 14:
Bits:
b3 b2 b1.
0
0
0 :
0
0
1 :
0
1
0 :
0
1
1 :
1
1
1 :
Bits b4 to b8 are RFU (see TS 31.101 [11]).
4.2.24
updated.
not updated.
PLMN not allowed.
Routing Area not allowed.
reserved.
EFFDN (Fixed Dialling Numbers)
If service n° 2 and/or service n° 89 is "available", this file shall be present.
This EF contains Fixed Dialling Numbers (FDN) and/or Supplementary Service Control strings (SSC). In addition it
contains identifiers of associated network/bearer capabilities and identifiers of extension records at the USIM ADF
level. It may also contain an associated alpha-tagging. If this file is present in the USIM, the Enabled Services
Table (EFEST) shall also be present.
Identifier: '6F3B'
Record length: X+14 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
X+1
X+2
X+3 to X+12
X+13
X+14
Structure: linear fixed
Optional
Update activity: low
PIN
PIN2
ADM
ADM
Description
Alpha Identifier
Length of BCD number/SSC contents
TON and NPI
Dialling Number/SSC String
Capability/Configuration2 Record Identifier
Extension2 Record Identifier
M/O
O
M
M
M
M
M
Length
X bytes
1 byte
1 byte
10 bytes
1 byte
1 byte
For contents and coding of all data items see the respective data items of the EFADN (clause 4.4.2.3), with the exception
that extension records are stored in the EFEXT2.
By default, destination addresses which are not in EFFDN shall not be allowed on any CS bearer service/teleservice, or
IMS communication or SMS when FDN is enabled.
For the FDN procedures related to SMS see TS 22.101 [24] and TS 31.111 [12].
NOTE:
4.2.25
The value of X (the number of bytes in the alpha-identifier) may be different to the length denoted X in
EFADN.
EFSMS (Short messages)
If service n° 10 is "available", this file shall be present.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
40
ETSI TS 131 102 V13.3.0 (2016-04)
This EF contains information in accordance with TS 23.040 [6] comprising short messages (and associated parameters)
which have either been received by the UE from the network, or are to be used as an UE originated message.
Identifier: '6F3C'
Record length: 176 bytes
Structure: linear fixed
Optional
Update activity: low
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2 to 176
PIN
PIN
ADM
ADM
Description
Status
Remainder
M/O
M
M
Length
1 byte
175 bytes
- Status.
Contents:
Status byte of the record which can be used as a pattern in the SEARCH RECORD command. For UE originating
messages sent to the network, the status shall be updated when the UE receives a status report, or sends a successful
SMS Command relating to the status report.
Coding:
b8
b7
b6
b5
b4
b3
b2
b1
X
X
0
0
X
X
0
1
0
1
1
1
1
1
1
free space
used space
message received by UE from network; message read
message received by UE from network; message to be
read
UE originating message; message to be sent
RFU (see TS 31.101 [11])
b8
b7
b6
b5
b4
b3
b2
b1
X
0
0
1
X
0
1
0
1
1
1
1
0
0
0
0
1
1
1
1
1
1
1
0
1
UE originating message; message sent to
Status report not requested
Status report requested but not (yet)
Status report requested, received but
in EF-SMSR;
Status report requested, received and
in EF-SMSR;
the network:
received;
not stored
stored
RFU (see TS 31.101 [11])
- Remainder.
Contents:
This data item commences with the TS-Service-Centre-Address as specified in TS 24.011 [10]. The bytes
immediately following the TS-Service-Centre-Address contain an appropriate short message TPDU as specified in
TS 23.040 [6], with identical coding and ordering of parameters.
Coding:
according to TS 23.040 [6] and TS 24.011 [10]. Any TP-message reference contained in an UE originated message
stored in the USIM, shall have a value as follows:
message to be sent:
Message sent to the network:
Value of the TP-message-reference:
'FF'.
the value of TP-Message-Reference used in the
message sent to the network.
Any bytes in the record following the TPDU shall be filled with 'FF'.
It is possible for a TS-Service-Centre-Address of maximum permitted length, e.g. containing more than 18 address
digits, to be associated with a maximum length TPDU such that their combined length is 176 bytes. In this case the ME
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
41
ETSI TS 131 102 V13.3.0 (2016-04)
shall store in the USIM the TS-Service-Centre-Address and the TPDU in bytes 2 to 176 without modification, except
for the last byte of the TPDU, which shall not be stored.
4.2.26
EFMSISDN (MSISDN)
If service n° 21 is "available", this file shall be present.
This EF contains MSISDN(s) related to the subscriber. In addition it contains identifiers of associated network/bearer
capabilities and identifiers of extension records at the USIM ADF level. It may also contain an associated
alpha-tagging.
Identifier: '6F40'
Record length: X+14 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
X+1
X+2
X+3 to X+12
X+13
X+14
Structure: linear fixed
Optional
Update activity: low
PIN
PIN/ADM
(fixed during administrative management)
ADM
ADM
Description
Alpha Identifier
Length of BCD number/SSC contents
TON and NPI
Dialling Number/SSC String
Capability/Configuration2 Record Identifier
Extension5 Record Identifier
M/O
O
M
M
M
M
M
Length
X bytes
1 byte
1 byte
10 bytes
1 byte
1 byte
For contents and coding of all data items see the respective data items of EFADN.
If the USIM stores more than one MSISDN number and the ME displays the MSISDN number(s) within the
initialisation procedure then the one stored in the first record shall be displayed with priority.
NOTE:
4.2.27
The value of X (the number of bytes in the alpha-identifier) may be different to the length denoted X in
EFADN.
EFSMSP (Short message service parameters)
If service n° 12 is "available", this file shall be present.
This EF contains values for Short Message Service header Parameters (SMSP), which can be used by the ME for user
assistance in preparation of mobile originated short messages. For example, a service centre address will often be
common to many short messages sent by the subscriber.
The EF consists of one or more records, with each record able to hold a set of SMS parameters. The first (or only)
record in the EF shall be used as a default set of parameters, if no other record is selected.
To distinguish between records, an alpha-identifier may be included within each record, coded on Y bytes.
The SMS parameters stored within a record may be present or absent independently. When a short message is to be sent
from the UE, the parameter in the USIM record, if present, shall be used when a value is not supplied by the user.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
42
Identifier: '6F42'
Record length: 28+Y bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to Y
Y+1
Y+2 to Y+13
Y+14 to Y+25
Y+26
Y+27
Y+28
ETSI TS 131 102 V13.3.0 (2016-04)
Structure: linear fixed
Optional
Update activity: low
PIN
PIN
ADM
ADM
Description
Alpha-Identifier
Parameter Indicators
TP-Destination Address
TS-Service Centre Address
TP-Protocol Identifier
TP-Data Coding Scheme
TP-Validity Period
M/O
O
M
M
M
M
M
M
Length
Y bytes
1 byte
12 bytes
12 bytes
1 byte
1 byte
1 byte
Storage is allocated for all of the possible SMS parameters, regardless of whether they are present or absent. Any bytes
unused, due to parameters not requiring all of the bytes, or due to absent parameters, shall be set to 'FF'.
- Alpha-Identifier.
Contents:
Alpha Tag of the associated SMS-parameter.
Coding:
see clause 4.4.2.3 (EFADN).
NOTE:
The value of Y may be zero, i.e. the alpha-identifier facility is not used. By using the command GET
RESPONSE the ME can determine the value of Y.
- Parameter Indicators.
Contents:
each of the default SMS parameters which can be stored in the remainder of the record are marked absent or present
by individual bits within this byte.
Coding:
allocation of bits:
bit number Parameter indicated.
1
TP-Destination Address.
2
TS-Service Centre Address.
3
TP-Protocol Identifier.
4
TP-Data Coding Scheme.
5
TP-Validity Period.
6
reserved, set to 1.
7
reserved, set to 1.
8
reserved, set to 1.
Bit value
0
1
Meaning.
Parameter present.
Parameter absent.
- TP-Destination Address.
Contents and Coding:
as defined for SM-TL address fields in TS 23.040 [6].
- TP-Service Centre Address.
Contents and Coding:
as defined for RP-Destination address Centre Address in TS 24.011 [10].
- TP-Protocol Identifier.
Contents and Coding:
as defined in TS 23.040 [6].
-
TP-Data Coding Scheme.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
43
ETSI TS 131 102 V13.3.0 (2016-04)
Contents and Coding:
as defined in TS 23.038 [5].
- TP-Validity Period.
Contents and Coding:
as defined in TS 23.040 [6] for the relative time format.
4.2.28
EFSMSS (SMS status)
If service n° 10 is "available", this file shall be present.
This EF contains status information relating to the short message service.
Identifier: '6F43'
File size: 2+X bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2
3 to 2+X
Structure: transparent
Optional
Update activity: low
PIN
PIN
ADM
ADM
Description
Last Used TP-MR
SMS "Memory Cap. Exceeded" Not. Flag
RFU
M/O
M
M
O
Length
1 byte
1 byte
X bytes
- Last Used TP-MR.
Contents:
- the value of the TP-Message-Reference parameter in the last mobile originated short message, as defined in
TS 23.040 [6].
Coding:
- as defined in TS 23.040 [6].
- SMS "Memory Capacity Exceeded" Notification Flag.
Contents:
- this flag is required to allow a process of flow control, so that as memory capacity in the UE becomes available, the
Network can be informed. The process for this is described in TS 23.040 [6].
Coding:
b1=1 means flag unset; memory capacity available;
b1=0 means flag set;
b2 to b8 are reserved and set to 1.
4.2.29
EFSDN (Service Dialling Numbers)
If service n° 4 and or service n° 89 is "available", this file shall be present.
This EF contains special service numbers (SDN) and/or the respective supplementary service control strings (SSC). In
addition it contains identifiers of associated network/bearer capabilities and identifiers of extension records at the USIM
ADF level. It may also contain associated alpha-tagging. If the service n° 89 is available this file will contain the eCall
test and reconfiguration numbers that are used by an UE in eCall and normal service mode.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
44
Identifier: '6F49'
Record length: X+14 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1-X
X+1
X+2
X+3 to X+12
X+13
X+14
ETSI TS 131 102 V13.3.0 (2016-04)
Structure: linear fixed
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
Alpha identifier
Length of BCD number/SSC contents
TON and NPI
Dialling Number/SSC String
Capability/Configuration2 Record Identifier
Extension3 Record Identifier
M/O
O
M
M
M
M
M
Length
X bytes
1 bytes
1 byte
10 bytes
1 byte
1 byte
For contents and coding of all data items see the respective data items of the EFADN (clause 4.4.2.3), with the exception
that extension records are stored in the EFEXT3 and capability/configuration parameters are stored in EFCCP2.
NOTE:
4.2.30
The value of X (the number of bytes in the alpha-identifier) may be different to the length denoted X in
EFADN.
EFEXT2 (Extension2)
If service n° 3 is "available", this file shall be present.
This EF contains extension data of an FDN (see FDN in 4.2.24).
Identifier: '6F4B'
Record length: 13 bytes
Structure: linear fixed
Optional
Update activity: low
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2 to 12
13
PIN
PIN2
ADM
ADM
Description
Record type
Extension data
Identifier
For contents and coding see clause 4.4.2.4 (EFEXT1).
4.2.31
EFEXT3 (Extension3)
If service n° 5 is "available", this file shall be present.
ETSI
M/O
M
M
M
Length
1 byte
11 bytes
1 byte
3GPP TS 31.102 version 13.3.0 Release 13
45
ETSI TS 131 102 V13.3.0 (2016-04)
This EF contains extension data of an SDN (see SDN in 4.2.29).
Identifier: '6F4C'
Record length: 13 bytes
Structure: linear fixed
Optional
Update activity: low
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2 to 12
13
PIN
ADM
ADM
ADM
Description
Record type
Extension data
Identifier
M/O
M
M
M
Length
1 byte
11 bytes
1 byte
For contents and coding see clause 4.4.2.4 (EFEXT1).
4.2.32
EFSMSR (Short message status reports)
If service n° 11 is "available", this file shall be present.
This EF contains information in accordance with TS 23.040 [6] comprising short message status reports which have
been received by the UE from the network.
Each record is used to store the status report of a short message in a record of EFSMS. The first byte of each record is the
link between the status report and the corresponding short message in EFSMS.
Identifier: '6F47'
Record length: 30 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2 to 30
Structure: linear fixed
Optional
Update activity: low
PIN
PIN
ADM
ADM
Description
SMS record identifier
SMS status report
M/O
M
M
Length
1
29 bytes
- SMS record identifier.
Contents:
- this data item identifies the corresponding SMS record in EFSMS, e.g. if this byte is coded '05' then this status report
corresponds to the short message in record #5 of EFSMS.
Coding:
- '00'
- empty record;
- '01' to 'FF' - record number of the corresponding SMS in EFSMS.
- SMS status report:
Contents:
- this data item contains the SMS-STATUS-REPORT TPDU as specified in TS 23.040 [6], with identical coding and
ordering of parameters.
Coding:
- according to TS 23.040 [6]. Any bytes in the record following the TPDU shall be filled with 'FF'.
4.2.33
EFICI (Incoming Call Information)
If service n°9 is "available", this file shall be present.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
46
ETSI TS 131 102 V13.3.0 (2016-04)
This EF is located within the USIM application. The incoming call information can be linked to the phone book stored
under DFTELECOM or to the local phone book within the USIM. The EFICI contains the information related to incoming
calls.
The time of the call and duration of the call are stored in this EF. This EF can also contain associated alpha identifier
that may be supplied with the incoming call. In addition it contains identifiers of associated network/bearer capabilities
and identifiers of extension records at the USIM ADF level. The structure of this EF is cyclic, so the contents shall be
updated only after a call is disconnected.
If CLI is supported and the incoming phone number matches a number stored in the phone book the incoming call
information is linked to the corresponding information in the phone book. If the incoming call matches an entry but is
indicated as hidden in the phone book the link is established but the information is not displayed by the ME if the code
for the secret entry has not been verified. The ME shall not ask for the secret code to be entered at this point.
Optionally the ME may store the link to phone book entry in the file, so that it does not need to look again for a match
in the phone book when it reuses the entry. But the ME will have to check that the incoming call number still exits in
the linked phone book entry, as the link might be broken (entry modified). When not used by the ME or no link to the
phone book has been found, this field shall be set to 'FFFFFF'.
The first byte of this link is used to identify clearly the phone book location either global (i.e. under DFTELECOM) or local
(i.e. USIM specific). To allow the reuse of the referring mechanism in further implementation of the phonebook under
discussion, this byte can be used to indicate those.
For the current version of the phone book, the phone book entry is identified as follows:
-
the record number in the EFPBR which indicates the EFADN containing the entry;
-
the record number inside the indicated EFADN.
The structure of EFICI is shown below. Coding scheme is according to EFADN
Structure of EFICI
Identifier: '6F80'
SFI: '14'
Record length: X+28 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
X+1
X+2
X+3 to X+12
X+13
X+14
X+15 to X+21
X+22 to X+24
X+25
X+26 to X+28
NOTE:
Structure: Cyclic
Optional
Update activity: high
PIN
PIN
ADM
ADM
Description
Alpha Identifier
Length of BCD number contents
TON and NPI
Incoming Call Number
Capability/Configuration2 Record Identifier
Extension5 Record Identifier
Incoming call date and time (see detail 1)
Incoming call duration (see detail 2)
Incoming call status (see detail 3)
Link to phone book entry (see detail 4)
M/O
O
M
M
M
M
M
M
M
M
M
Length
X bytes
1 byte
1 byte
10 bytes
1 byte
1 byte
7 bytes
3 bytes
1 byte
3 bytes
When the contents except incoming call status are invalid, they are filled with 'FF'.
Detail 1 Coding of date and time.
Content:
the date and time are defined by the ME.
Coding:
it is according to the extended BCD coding from Byte1 to Byte 7. The first 3 bytes show year, month and day
(yy.mm.dd). The next 3 bytes show hour, minute and second (hh.mm.ss). The last Byte 7 is Time Zone. The Time Zone
indicates the difference, expressed in quarters of an hour, between the local time and GMT. Bit 4 in Byte 7 represents
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
47
ETSI TS 131 102 V13.3.0 (2016-04)
the algebraic sign of this difference (0: positive, 1: negative). If the terminal does not support the Time Zone, Byte 7
shall be "FF". Byte X+15: Year.
B8
b7
b6
b5
b4
b3
b2
b1
LSB of first digit year
MSB of first digit year
LSB of second digit year
MSB of second digit year
Byte X+16: Month
b8
b7
b6
b5
b4
b3
b2
b1
LSB of first digit month
MSB of first digit month
LSB of second digit month
MSB of second digit month
Byte X+17: Day
b8
b7
b6
b5
b4
b3
b2
b1
LSB of first digit day
MSB of first digit day
LSB of second digit day
MSB of second digit day
Byte X+18: Hour
b8
b7
b6
b5
b4
b3
b2
b1
LSB of first digit hour
MSB of first digit hour
LSB of second digit hour
MSB of second digit hour
Byte X+19: Minute
b8
b7
b6
b5
b4
b3
b2
b1
LSB of first digit minute
MSB of first digit minute
LSB of second digit minute
MSB of second digit minute
Byte X+20: Second
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
b8
b7
b6
b5
b4
b3
48
b2
ETSI TS 131 102 V13.3.0 (2016-04)
b1
LSB of first digit second
MSB of first digit second
LSB of second digit second
MSB of second digit second
Byte X+21: Time Zone
b8
b7
b6
b5
b4
b3
b2
b1
LSB of first digit indicates by quarters an hour
MSB of first digit indicates by quarters an hour
the algebraic sign (0: positive, 1: negative)
LSB of second digit indicates by quarters an hour
MSB of second digit indicates by quarters an hour
Detail 2 Coding of call duration.
Call duration is indicated by second.
Byte X+22:
b8
b7
b6
b5
b4
b3
b2
b1
223
222
221
220
219
218
217
216
b8
b7
b6
b5
b4
b3
b2
b1
215
214
213
212
211
210
29
28
b8
b7
b6
b5
b4
b3
b2
b1
27
26
25
24
23
22
21
20
Byte X+23:
Byte X+24:
For instance, '00' '00' '30' represents 25+24.
Detail 3 Coding of Call status.
Byte X+25:
b8
b7
b6
b5
b4
b3
b2
b1
Answered='0'/ Not Answered='1'
RFU
Detail 4 Link to phone book entry
For the current implementation of the phone book the following coding applies:
Phone book reference.
Byte X+26:
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
b8
b7
b6
b5
b4
b3
49
b2
ETSI TS 131 102 V13.3.0 (2016-04)
b1
0 Global Phone Book (DFTELECOM)
1 Local Phone Book (USIM Specific)
RFU
EFPBR record number:
-
Byte X+27: Hexadecimal value.
EFADN record number:
-
Byte X+28: Hexadecimal value.
4.2.34
EFOCI (Outgoing Call Information)
If service n°8 is "available", this file shall be present.
This EF is located within the USIM application. The outgoing call information can be linked to the phone book stored
under DFTELECOM or to the local phone book within the USIM. The EFOCI contains the information related to outgoing
calls.
The time of the call and duration of the call are stored in this EF. It may also contain associated alpha identifier. In
addition it contains identifiers of associated network/bearer capabilities and identifiers of extension records at the USIM
ADF level. The structure of this file is cyclic, so the contents shall be updated only after a call is disconnected.
If the dialled phone number matches a number stored in the phone book the outgoing call information might be linked
to the corresponding information in the phone book. The dialled number may match with a hidden entry in the phone
book. If the dialled number matches a hidden entry in the phone book the link is established but the information related
to the phone book entry is not displayed by the ME, if the hidden code has not been verified. The ME shall not perform
hidden code verification at this point.
Optionally, the ME may store the link to phone book entry in the file, so that it does not need to look again for a match
in the phone book when it reuses the entry. But the ME will have to check that the outgoing call number still exists in
the linked phone book entry, as the link might be broken (entry modified). When not used by the ME or no link to the
phone book has been found, this field shall be set to 'FFFFFF'.
Coding scheme is according to EFICI.
Structure of EFOCI
Identifier: '6F81'
SFI: '15'
Record length: X+27 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
X+1
X+2
X+3 to X+12
X+13
X+14
X+15 to X+21
X+22 to X+24
X+25 to X+27
NOTE:
Structure: Cyclic
Optional
Update activity: high
PIN
PIN
ADM
ADM
Description
Alpha Identifier
Length of BCD number/SSC contents
TON and NPI
Outgoing Call Number/SSC String
Capability/Configuration2 Record Identifier
Extension5 Record Identifier
Outgoing call date and time
Outgoing call duration
Link to Phone Book Entry
When the contents are invalid, they are filled with 'FF'.
ETSI
M/O
O
M
M
M
M
M
M
M
M
Length
X bytes
1 byte
1 byte
10 bytes
1 byte
1 byte
7 bytes
3 bytes
3 bytes
3GPP TS 31.102 version 13.3.0 Release 13
4.2.35
50
ETSI TS 131 102 V13.3.0 (2016-04)
EFICT (Incoming Call Timer)
If service n°9 is "available", this file shall be present.
This EF contains the accumulated incoming call timer duration value for the current call and previous calls. The EF is
USIM specific and resides within the USIM application.
This file should have only one entry.
Structure of EFICT
Identifier: '6F82'
Record length: 3 bytes
Structure: cyclic
Optional
Update activity: high
Access Conditions:
READ
UPDATE
PIN
PIN/PIN2
(fixed during administrative management)
PIN
ADM
ADM
INCREASE
DEACTIVATE
ACTIVATE
Bytes
1 to 3
Description
Accumulated call timer value
M/O
M
Length
3 bytes
Coding:
Accumulated call timer value is indicated by second.
Byte 1:
b8
b7
b6
b5
b4
b3
b2
b1
223
222
221
220
219
218
217
216
b8
b7
b6
b5
b4
b3
b2
b1
215
214
213
212
211
210
29
28
b8
b7
b6
b5
b4
b3
b2
b1
27
26
25
24
23
22
21
20
Byte 2:
Byte 3:
For example, '00' '00' '30' represents 25+24.
4.2.36
EFOCT (Outgoing Call Timer)
If service n°8 is "available", this file shall be present.
This EF contains the accumulated outgoing call timer duration value for the current call and previous calls. The EF is
USIM specific and resides within the USIM application. The contents of this EF shall be updated only after a call is
disconnected. The coding of this EF is the same as EFICT.
This file should have only one entry.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
51
ETSI TS 131 102 V13.3.0 (2016-04)
Structure of EFOCT
Identifier: '6F83'
Record length: 3 bytes
Structure: cyclic
Optional
Update activity: high
Access Conditions:
READ
UPDATE
PIN
PIN/PIN2
(fixed during administrative management)
PIN
ADM
ADM
INCREASE
DEACTIVATE
ACTIVATE
Bytes
1 to 3
4.2.37
Description
Accumulated call timer value
M/O
M
Length
3 bytes
EFEXT5 (Extension5)
If service n° 44 is "available", this file shall be present.
This EF contains extension data of EFICI, EFOCI and EFMSISDN of the USIM application.
Identifier: '6F4E'
Record length: 13 bytes
Structure: linear fixed
Optional
Update activity: low
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2 to 12
13
PIN
PIN
ADM
ADM
Description
M/O
M
M
M
Record type
Extension data
Identifier
Length
1 byte
11 bytes
1 byte
For contents and coding see EFEXT1.
4.2.38
EFCCP2 (Capability Configuration Parameters 2)
If service n° 14 is "available", this file shall be present.
This EF contains parameters of required network and bearer capabilities and terminal configurations associated with a
call established using a fixed dialling number, a barred dialling number, an MSISDN, a service dialling number, an
incoming call, an outgoing call or an MBDN. It is referred by EFFDN, EFBDN, EFMSISDN, EFSDN, EFICI, EFOCI, EFMBDN and
EFCFIS at USIM ADF level.
Identifier: '6F4F'
SFI: '16'
Record length: X bytes, X≥15
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
-
Structure: linear fixed
Optional
Update activity: low
PIN
PIN
ADM
ADM
Description
Bearer capability information element
M/O
M
Length
X bytes
Bearer capability information elements.
Contents and Coding:
see TS 24.008 [9]. The Information Element Identity (IEI) shall be excluded, i.e. the first byte of the EFCCP2 record
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
52
ETSI TS 131 102 V13.3.0 (2016-04)
shall be Length of the bearer capability contents.
- unused bytes are filled with 'FF'.
4.2.39
EFeMLPP (enhanced Multi Level Precedence and Pre-emption)
If service n° 24 is "available", this file shall be present.
This EF contains information about priority levels and fast call set-up conditions for the enhanced Multi Level
Precedence and Pre-emption service that can be used by the subscriber.
Identifier: '6FB5'
File size: 2 bytes
Structure: transparent
Optional
Update activity: low
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2
PIN
ADM
ADM
ADM
Description
Priority levels
Fast call set-up conditions
M/O
M
M
Length
1 byte
1 byte
- Priority levels.
Contents:
- the eMLPP priority levels subscribed to.
Coding:
-
each eMLPP priority level is coded on one bit. Priority levels subscribed to have their corresponding bits
set to 1. Priority levels not subscribed to have their corresponding bits set to 0. Bit b8 is reserved and set
to 0.
Byte 1:
b8
b7
b6
b5
b4
b3
b2
b1
priority
priority
priority
priority
priority
priority
priority
0
NOTE:
level
level
level
level
level
level
level
A
B
0
1
2
3
4
Priority levels A and B can not be subscribed to (see TS 22.067 [5] for details).
EXAMPLE 1:
If priority levels 0, 1 and 2 are subscribed to, EFeMLPP shall be coded '1C'.
- Fast call set-up conditions.
Contents:
for each eMLPP priority level, the capability to use a fast call set-up procedure.
Coding:
each eMLPP priority level is coded on one bit. Priority levels for which fast call set-up is allowed have their
corresponding bits set to 1. Priority levels for which fast call set-up is not allowed have their corresponding bits set to 0.
Bit b8 is reserved and set to 0.
Byte 2: fast call set-up condition for:
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
b8
b7
b6
b5
b4
b3
53
b2
b1
fast
fast
fast
fast
fast
fast
fast
0
`
call
call
call
call
call
call
call
set-up
set-up
set-up
set-up
set-up
set-up
set-up
condition
condition
condition
condition
condition
condition
condition
for
for
for
for
for
for
for
priority
priority
priority
priority
priority
priority
priority
level
level
level
level
level
level
level
A
B
0
1
2
3
4
If fast call set-up is allowed for priority levels 0, and 1, then byte 2 of EFeMLPP is coded '0C'.
EXAMPLE 2:
4.2.40
ETSI TS 131 102 V13.3.0 (2016-04)
EFAaeM (Automatic Answer for eMLPP Service)
If service n° 25 is "available", this file shall be present.
This EF contains those priority levels (of the Multi Level Precedence and Pre-emption service) for which the ME shall
answer automatically to incoming calls.
Identifier: '6FB6'
File size: 1 byte
Structure: transparent
Optional
Update activity: low
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
PIN
PIN
ADM
ADM
Description
Automatic answer priority levels
M/O
M
Length
1 byte
- Automatic answer priority levels.
Contents:
- for each eMLPP priority level, the capability for the mobile station to answer automatically to incoming calls (with
the corresponding eMLPP priority level).
Coding:
- each eMLPP priority level is coded on one bit. Priority levels allowing an automatic answer from the mobile station
have their corresponding bits set to 1. Priority levels not allowing an automatic answer from the mobile station have
their corresponding bits set to 0. Bit b8 is reserved and set to 0.
Byte 1:
b8
b7
b6
b5
b4
b3
b2
b1
Automatic
Automatic
Automatic
Automatic
Automatic
Automatic
Automatic
0
EXAMPLE:
answer
answer
answer
answer
answer
answer
answer
priority
priority
priority
priority
priority
priority
priority
for
for
for
for
for
for
for
priority
priority
priority
priority
priority
priority
priority
level
level
level
level
level
level
level
A
B
0
1
2
3
4
If automatic answer is allowed for incoming calls with priority levels A, 0 and 1, then EFAaeM is
coded '0D'.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
54
ETSI TS 131 102 V13.3.0 (2016-04)
4.2.41
Void
4.2.42
EFHiddenkey (Key for hidden phone book entries)
This EF contains the hidden key that has to be verified by the ME in order to display the phone book entries that are
marked as hidden. The hidden key can consist of 4 to 8 digits.
Identifier: '6FC3'
File size: 4 bytes
Structure: transparent
Optional
Update activity: low
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 4
PIN
PIN
ADM
ADM
Description
Hidden Key
M/O
M
Length
4 bytes
- Hidden Key.
Coding:
- the hidden key is coded on 4 bytes using BCD coding. The minimum number of digits is 4. Unused digits are
padded with 'F'.
NOTE 1: Digits are not swapped, i.e. for instance the key "1234" is coded as '12 34 FF FF'.
NOTE 2: The phone book entries marked as hidden are not scrambled by means of the hidden key. They are stored
in plain text in the phone book.
4.2.43
Void
4.2.44
EFBDN (Barred Dialling Numbers)
If service n° 6 is "available", this file shall be present.
This EF contains Barred Dialling Numbers (BDN) and/or Supplementary Service Control strings (SSC). In addition it
contains identifiers of associated network/bearer capabilities and identifiers of extension records. It may also contain an
associated alpha-tagging. As the BDN service relies on the Call Control feature, BDN shall only be available if Call
Control is available. If this file is present in the USIM, the Enabled Services Table (EFEST) shall also be present.
Identifier: '6F4D'
Record length: X+15 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
X+1
X+2
X+3 to X+12
X+13
X+14
X+15
Structure: linear fixed
Optional
Update activity: low
PIN
PIN2
ADM
ADM
Description
Alpha Identifier
Length of BCD number/SSC contents
TON and NPI
Dialling Number/SSC String
Capability/Configuration2 Record Identifier
Extension4 Record Identifier
Comparison Method Pointer
M/O
O
M
M
M
M
M
M
Length
X bytes
1 byte
1 byte
10 bytes
1 byte
1 byte
1 byte
For contents and coding of all data items, except for the Comparison Method Pointer, see the respective data items of
EFADN, with the exception that extension records are stored in the EFEXT4 and capability/configuration parameters are
stored in EFCCP2. The Comparison Method Pointer refers to a record number in EFCMI.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
NOTE:
4.2.45
55
ETSI TS 131 102 V13.3.0 (2016-04)
The value of X (the number of bytes in the alpha-identifier) may be different to the length denoted X in
EFADN.
EFEXT4 (Extension4)
If service n° 7 is "available", this file shall be present.
This EF contains extension data of a BDN/SSC.
Identifier: '6F55'
Record length: 13 bytes
Structure: linear fixed
Optional
Update activity: low
Access Conditions:
READ
UPDATE
DEACTIVE
ACTIVATE
Bytes
1
2 to 12
13
PIN
PIN2
ADM
ADM
Description
Record type
Extension data
Identifier
M/O
M
M
M
Length
1 byte
11 bytes
1 byte
For contents and coding see clause 4.4.2.4 EFEXT1.
4.2.46
EFCMI (Comparison Method Information)
If service n° 6 is "available", this file shall be present.
This EF contains the list of Comparison Method Identifiers and alpha-tagging associated with BDN entries (see EFBDN).
Identifier: '6F58'
Record length: X+1 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
X+1
Structure: linear fixed
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
Alpha Identifier
Comparison Method Identifier
M/O
M
M
Length
X bytes
1 byte
-
Alpha Identifier.
Contents:
Alpha-tagging of the associated Comparison Method Identifier.
Coding:
Same as the alpha identifier in EFADN.
- Comparison Method Identifier.
Contents:
- this byte describes the comparison method which is associated with a BDN record. Its interpretation is not specified
but it shall be defined by the card issuers implementing the BDN feature on their USIMs.
Coding:
- binary; values from 0 to 255 are allowed.
The default coding 255 is reserved for empty field.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
4.2.47
56
ETSI TS 131 102 V13.3.0 (2016-04)
EFEST (Enabled Services Table)
If service n° 2, 6, 34 or 35 is "available" (as indicated in the USIM Service Table), this file shall be present.
This EF indicates which services are enabled. If a service is not indicated as enabled in this table, the ME shall not
select the service.
Identifier: '6F56'
SFI: '05'
File size: X bytes, (X ≥ 1)
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2
etc.
X
-Services
Contents:
Structure: transparent
Update activity: low
PIN
PIN2
ADM
ADM
Description
Services n°1 to n°8
Services n°9 to n°16
Services n°(8X-7) to n°(8X)
Service n°1:
Service n°2:
Service n°3:
Optional
M/O
M
O
Length
1 byte
1 byte
O
1 byte
Fixed Dialling Numbers (FDN)
Barred Dialling Numbers (BDN)
APN Control List (ACL)
The EF shall contain at least one byte. Further bytes may be included, but if the EF includes an optional byte, then the
EF shall also contain all bytes before that byte. Other services are possible in the future. The coding falls under the
responsibility of the 3GPP.
Coding:
-
1 bit is used to code each service:
- bit = 1: service activated;
- bit = 0: service deactivated.
- Unused bits shall be set to '0'.
A service which is listed in this table is enabled if it is indicated as available in the USIM Service Table (UST) and
indicated as activated in the Enabled Services Tables (EST) otherwise this service is, either not available or disabled.
First byte:
b8
b7
b6
B5
b4
b3
b2
b1
Service
Service
Service
Service
Service
Service
Service
Service
n°1
n°2
n°3
n°4
n°5
n°6
n°7
n°8
etc.
4.2.48
EFACL (Access Point Name Control List)
If service n° 35 is "available", this file shall be present.
This EF contains the list of allowed APNs (Access Point Names). If this file is present in the USIM, the Enabled
Services Table (EFEST) shall also be present.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
57
Identifier: '6F57'
File size: X bytes (X>1)
Structure: transparent
Optional
Update activity: low
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2 to X
ETSI TS 131 102 V13.3.0 (2016-04)
PIN
PIN2
ADM
ADM
Description
Number of APNs
APN TLVs
M/O
M
M
Length
1 byte
X-1 byte
For contents and coding of APN-TLV values see TS 23.003 [25]. The tag value of the APN-TLV shall be 'DD'.
"Network provided APN" is coded with a TLV object of length zero.
4.2.49
EFDCK (Depersonalisation Control Keys)
If service n° 36 is "available", this file shall be present.
This EF provides storage for the de-personalization control keys associated with the OTA de-personalization cycle of
TS 22.022 [27].
Identifier: '6F2C'
File Size: 16 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 4
5 to 8
9 to 12
13 to 16
Structure: transparent
Optional
Update activity: low
PIN
PIN
ADM
ADM
Description
8 digits of network de-personalization control key
8 digits of network subset de-personalization
control key
8 digits of service provider de-personalization
control key
8 digits of corporate de-personalization control
key
M/O
M
M
Length
4 bytes
4 bytes
M
4 bytes
M
4 bytes
Empty control key bytes shall be coded 'FFFFFFFF'.
4.2.50
EFCNL (Co-operative Network List)
If service n° 37 is "available", this file shall be present.
This EF contains the Co-operative Network List for the multiple network personalization services defined in
TS 22.022 [27].
Identifier: '6F32'
File size: 6n bytes, (n ≥ 1)
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 6
:
6n-5 to 6n
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
Element 1 of co-operative net list
:
Element n of co-operative net list
ETSI
M/O
M
:
O
Length
6 bytes
:
6 bytes
3GPP TS 31.102 version 13.3.0 Release 13
-
58
ETSI TS 131 102 V13.3.0 (2016-04)
Co-operative Network List.
Contents:
- PLMN network subset, service provider ID and corporate ID of co-operative networks.
Coding:
- For each 6 byte list element.
Bytes 1 to 3: PLMN (MCC + MNC): according to TS 24.008 [9].
Byte 4:
b8
b7
b6
b5
b4
b3
b2
b1
LS
:
:
MS
LS
:
:
MS
bit of network subset digit 1
LS
:
:
MS
LS
:
:
MS
bit of service provider digit 1
LS
:
:
MS
LS
:
:
MS
bit of corporate digit 1
bit of network subset digit 1
bit of network subset digit 2
bit of network subset digit 2
Byte 5:
b8
b7
b6
b5
b4
b3
b2
b1
bit of service provider digit 1
bit of service provider digit 2
bit of service provider digit 2
Byte 6:
b8
b7
b6
b5
b4
b3
b2
b1
bit of corporate digit 1
bit of corporate digit 2
bit of corporate digit 2
-
Empty fields shall be coded with 'FF'.
-
The end of the list is delimited by the first MCC field coded 'FFF'.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
4.2.51
59
ETSI TS 131 102 V13.3.0 (2016-04)
EFSTART-HFN (Initialisation values for Hyperframe number)
This EF contains the values of STARTCS and STARTPS of the bearers that were protected by the keys in EFKEYS or
EFKEYSPS at release of the last CS or PS RRC connection. These values are used to control the lifetime of the keys (see
TS 33.102 [13]).
Identifier: '6F5B'
SFI: '0F'
File size: 6 bytes
Structure: transparent
Update activity: high
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 3
4 to 6
Mandatory
PIN
PIN
ADM
ADM
Description
M/O
M
M
STARTCS
STARTPS
Length
3 bytes
3 bytes
-
STARTCS
Contents: Initialisation value for Hyperframe number – CS domain.
Coding: The LSB of STARTCS is stored in bit 1 of byte 3. Unused nibbles are set to 'F'.
-
STARTPS
Contents: Initialisation value for Hyperframe number – PS domain.
Coding: As for STARTCS.
4.2.52
EFTHRESHOLD (Maximum value of START)
This EF contains the maximum value of STARTCS or STARTPS. This value is used to control the lifetime of the keys
(see TS 33.102 [13]).
Identifier: '6F5C'
SFI: '10'
File size: 3 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 3
Structure: transparent
Mandatory
Update activity: low
PIN
ADM
ADM
ADM
Description
Maximum value of STARTCS or STARTPS.
M/O
M
Length
3 bytes
- Maximum value of STARTCS or STARTPS.
Coding: As for STARTCS
4.2.53
EFOPLMNwACT (Operator controlled PLMN selector with Access
Technology)
If service n° 42 is "available", this file shall be present.
This EF contains the coding for n PLMNs where n is determined by the operator. This information is determined by the
operator and defines the preferred PLMNs in priority order. The first record indicates the highest priority and the nth
record indicates the lowest. The EF also contains the Access Technologies for each PLMN in this list. (see
TS 23.122 [31])
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
60
Identifier: '6F61'
SFI: '11'
File size: 5n bytes , (n ≥ 8)
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 3
4 to 5
:
36 to 38
39 to 40
41 to 43
44 to 45
:
(5n-4) to (5n-2)
(5n-1) to 5n
ETSI TS 131 102 V13.3.0 (2016-04)
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
st
1 PLMN (highest priority)
st
1 PLMN Access Technology Identifier
:
th
8 PLMN
th
8 PLMN Access Technology Identifier
th
9 PLMN
th
9 PLMN Access Technology Identifier
:
th
N PLMN (lowest priority)
th
N PLMN Access Technology Identifier
M/O
M
M
Length
3 bytes
2 bytes
M
M
O
O
3 bytes
2 bytes
3 bytes
2 bytes
O
O
3 bytes
2 bytes
- PLMN.
Contents:
- Mobile Country Code (MCC) followed by the Mobile Network Code (MNC).
Coding:
- according to TS 24.008 [9].
- Access Technology Identifier:
Coding:
- See EFPLMNwACT for coding.
4.2.54
EFHPLMNwAcT (HPLMN selector with Access Technology)
If service n°43 is "available", this file shall be present.
The HPLMN Selector with access technology data field shall contain the HPLMN code, or codes together with the
respected access technology in priority order (see TS 23.122 [31]).
Identifier: '6F62'
SFI: '13'
File size: 5n (n ≥ 1) bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 3
4 to 5
6 to 8
9 to 10
:
(5n-4) to (5n-2)
(5n-1) to 5n
Structure: Transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
st
1 PLMN (highest priority)
st
1 PLMN Access Technology Identifier
nd
2 PLMN
nd
2 PLMN Access Technology Identifier
:
th
n PLMN (lowest priority)
th
n PLMN Access Technology Identifier
- PLMN
Contents:
Mobile Country Code (MCC) followed by the Mobile Network Code (MNC).
Coding:
ETSI
M/O
M
M
O
O
Length
3 bytes
2 bytes
3 bytes
2 bytes
O
O
3 bytes
2 bytes
3GPP TS 31.102 version 13.3.0 Release 13
61
ETSI TS 131 102 V13.3.0 (2016-04)
according to TS 24.008 [47].
- Access Technology:
Contents: The Access Technology of the HPLMN that the ME will assume when searching for the HPLMN, in priority
order. The first Access Technology in the list has the highest priority.
Coding:
-
4.2.55
See EFPLMNwACT for coding.
EFARR (Access Rule Reference)
This EF contains the access rules for files located under the USIM ADF in the UICC. If the security attribute tag '8B' is
indicated in the FCP it contains a reference to a record in this file.
Structure of EFARR at ADF-level
Identifier: '6F06'
SFI: '17'
Record Length: X bytes, (X > 0)
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
Structure: Linear fixed
Mandatory
Update activity: low
ALW
ADM
ADM
ADM
Description
Access Rule TLV data objects
M/O
M
Length
X bytes
This EF contains one or more records containing access rule information according to the reference to expanded format
as defined in ISO/IEC 7816-4 [20]. Each record represents an access rule. Unused bytes in the record are set to 'FF'.
If the card cannot access EFARR , any attempt to access a file with access rules indicated in this EFARR shall not be
granted.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
62
4.2.56
Void
4.2.57
EFNETPAR (Network Parameters)
ETSI TS 131 102 V13.3.0 (2016-04)
This EF contains information concerning the cell frequencies
Network Parameter storage may reduce the extent of the terminal search of FDD, TDD or GSM carriers when selecting
a cell. The network parameters stored in the USIM shall be in accordance with the procedures specified in this clause.
The RF carrier frequency information is stored on 2 bytes and coded on 16 bits starting from 0,0 MHz. Each increment
of the 16 bit value is an increment of 200 kHz in frequency. This allows the exact channel frequency to be stored in this
data field making it independent of any band information. It is up to the terminal to associate the indicated frequency
with a particular band, e.g. GSM 900, GSM 1800 etc. This means that a range from 0 to 13,1 GHz can be covered, with
the resolution of 200 kHz. The frequency indicated is always the terminal receiver carrier frequency.
The EF provides a minimum storage capacity of 46 bytes in order to provide the capability of storing at least two cell
information TLV objects, e.g. GSM/FDD or FDD/TDD in its minimum configuration, i.e. the terminal can rely on the
required memory space for storing at least two cell information lists offering 8 GSM neighbour carrier frequencies and
8 Intra/Inter frequencies, respectively. In what configuration the available memory actually is being used is up to the
terminal.
A terminal shall ignore a TLV object or the value of a carrier frequency which is beyond its capabilities, i.e. an FDD
only terminal shall ignore the GSM related frequency information. When updating this file, the terminal shall update it
with the current values available in the terminal. Updating of this file shall start from the beginning of the file. The
terminal need not respect the structure of any information previously stored, i.e. an FDD only terminal may overwrite
the GSM parameters stored in this file by another terminal.
The GSM cell information constructed TLV object contains the information of the BCCH channel frequency that the
terminal is currently camped on, indicated by tag '80'. The constructed TLV object also contains an indication of up to
32 neighbour BCCH carrier frequencies indicated by tag '81'. In order to store a complete set of GSM network
parameters, a total of 72 bytes is required. The terminal shall convert the BCCH channel information, as specified in
TS 44.018 [28], received from the network into the corresponding frequency before storing it in the USIM.
The FDD cell information constructed TLV object contains the scrambling code information for the intra frequency
carrier, tag '80', and the inter frequency scrambling codes, tag '81'. The intra frequency carrier information may contain
up to 32 scrambling codes (m) while there is a limitation of the number of inter frequency scrambling codes (n1, n2,
n3). The number of inter frequencies that can be indicated is limited to three and the total amount of scrambling codes
for the inter frequencies is limited to 32 (n1+n2+n3 <= 32), i.e. if only one inter frequency carrier is indicated, it can
contain up to 32 scrambling codes. If two or more inter frequency carriers are indicated, a total of 32 scrambling codes
can be provided. How the information is split between the inter frequency carriers is determined by the terminal. In
order to store a complete set of FDD cell information a total of 146 bytes is required. The terminal shall convert the
UARFCN information, as specified in TS 25.101 [33], received from the network into the corresponding frequency
before storing it in the USIM.
The TDD cell information constructed TLV object has the same structure as the FDD cell information TLV object.
NOTE:
Currently there is no inter frequency cell information required for the TDD case.
Identifier: '6FC4'
File size: X bytes, (X ≥ 46)
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
-
Structure: transparent
Mandatory
Update activity: high
PIN
PIN
ADM
ADM
Description
TLV object(s) containing GSM/FDD/TDD cell
information
EFNETPAR Cell Information tags
ETSI
M/O
O
Length
X
3GPP TS 31.102 version 13.3.0 Release 13
Description
-
ETSI TS 131 102 V13.3.0 (2016-04)
Value
GSM Cell Information Tag
Camping Frequency Tag
Camping Frequency Information
Neighbour Frequency Tag
Neighbour Frequency Information
'A0'
'80'
FDD Cell Information Tag
Intra Frequency Information Tag
Scrambling code Information
'A1'
'80'
Inter Frequency Information Tag
Scrambling code information
'81'
TDD Frequency information Tag
Intra Frequency Information Tag
Cell parameters ID
'A2'
'80'
Inter Frequency Information Tag
Cell parameters ID
'81'
'81'
Information Element size
bytes
1
1
2
1
2*m
(8 <= m <= 32)
1
1
2*m
(8 <= m <= 32)
1
2*(n1+n2+n3)
(8 <= n1+n2+n3 <= 32)
1
1
2*m
(8 <= m <= 32)
1
2*(n1+n2+n3)
(8 <= n1+n2+n3 <= 32)
GSM Cell Information, if tag 'A0' is present in this EF the content of this TLV is as follows:
Description
GSM Cell Information Tag
Length
Current camped cell BCCH frequency
information tag
Length
Current camped BCCH frequency
Neighbour Cell BCCH Frequency
information tag
Length
Neighbour BCCH carrier frequencies
-
63
Value
'A0''
'4+ (2+2*m)
(<=70) '
'80'
M/O
M
M
Length
1
1
M
1
'02'
M
M
O
1
2
1
O
O
1
2*m
(8 <= m <= 32)
'81'
2*m (=< 32)
FDD Cell Information. If tag 'A1' is present in this EF the content of this TLV is as follows:
Description
FDD Cell Information Tag
Length
FDD Intra Frequency information tag
Length
Intra Frequency carrier frequency
Intra Frequency scrambling codes
Value
'A1'
4+(2*m)+(4+2*n1
)+(4+2*n2)+(4+2*
n3) (<=144)
'80'
2+2*m
M/O
M
M
Length
1
1
M
M
M
M
1
1
2
2*m
(8 <= m <= 32)
1
FDD Inter Frequency information tag
'81'
O
(see NOTE 1)
Length
2+2*n (NOTE 2)
O
1
Inter Frequency carrier frequencies
O
2
Inter Frequency scrambling codes
O
2*n (NOTE 2)
NOTE 1: This TLV object may occur up to 3 times within the constructed TLV object
depending how many inter frequencies are indicated
NOTE 2: n is in this case n1, n2 or n3, 8 <= (n1+n2+n3)<=32
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
-
64
ETSI TS 131 102 V13.3.0 (2016-04)
TDD Cell Information: If tag 'A2' is present in this EF the content of this TLV is as follows:
Description
TDD Cell Information Tag
Length
Value
'A2'
4+(2*m)+(4+2*n1
)+(4+2*n2)+(4+2*
n3) (<=144)
'80'
2+2*m
TDD Intra Frequency information tag
Length
Intra Frequency carrier frequency
Intra Frequency scrambling codes
M/O
M
M
Length
1
1
M
M
M
M
1
1
2
2*m
(8 <= m <= 32)
1
TDD Inter Frequency information tag
'81'
O
(see NOTE 1)
Length
2+2*n (NOTE 2)
O
1
Inter Frequency carrier frequencies
O
2
Inter Frequency scrambling codes
O
2*n (NOTE 2)
NOTE 1: This TLV object may occur up to 3 times within the constructed TLV object
depending how many inter frequencies are indicated
NOTE 2: n is in this case n1, n2 or n3, 8 <= (n1+n2+n3)<=32
4.2.58
EFPNN (PLMN Network Name)
If service n°45 is "available", this file shall be present.
This EF contains the full and short form versions of the network name for the registered PLMN. The ME shall use these
versions in place of its own versions of the network name for the PLMN (stored in the ME's memory list), and also in
place of the versions of the network name received when registered to the PLMN, as defined by TS 24.008 [9].
This file may also contain PLMN additional information to be displayed to the user during the Manual Network
Selection procedures as defined in TS 23.122 [31].
If the EFOPL is not present, then the first record in this EF is used for the default network name when registered in the
HPLMN (if the EHPLMN list is not present or is empty) or an EHPLMN (if the EHPLMN list is present).
Identifier: '6FC5'
SFI: '19'
Record length: X bytes; X ≥ 3
Access Conditions:
READ
UPDATE
ACTIVATE
DEACTIVATE
Bytes
1 to X
-
Structure: linear fixed
Optional
Update activity: low
ALWAYS
ADM
ADM
ADM
Description
Network name TLV objects
M/O
M
Length
X bytes
Network name TLV objects.
The content and coding (Full name for network and Short name for network) is defined below, where the fields
within the objects are defined in TS 24.008 [9]:
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
65
ETSI TS 131 102 V13.3.0 (2016-04)
Coding of the Network name TLV objects
Length
1 byte
Description
Status
Full name for network IEI: '43'
M
(This shall be the same as that used in the
MM/GMM INFORMATION message).
1 byte
Length of Full name for network Name contents
M
Y bytes
Full name for network contents (Octets 3 to n of
M
network name information element)
1 byte
Short name for network IEI: '45'
O
(This shall be the same as that used in the
MM/GMM INFORMATION message).
1 byte
Length of Short name for network
C1
Z bytes
Short name for network contents (Octets 3 to n
C1
of network name information element)
1 byte
PLMN Additional Information tag ('80')
O
1 byte
Length of PLMN Additional Information
C2
W bytes
PLMN Additional Information (coded using one
C2
of the UCS2 code options as defined in
TS 31.101 [11]).
C1: this field shall be present if the short name for network IEI is present
C2: this field shall be present if the PLMN Additional Information tag is
present
Unused bytes shall be set to 'FF'.
4.2.59
EFOPL (Operator PLMN List)
If service n°46 is "available", this file shall be present.
This EF contains a prioritised list of Location Area Information (LAI) or Tracking Area Identity (TAI) identities that
are used to associate a specific operator name contained in EFPNN or EFPNNI with the LAI/TAI. The ME shall use this EF
in association with the EFPNN in place of any network name stored within the ME's internal list and any network name
received when registered to the PLMN, as defined by TS 24.008 [9] or TS 24.301 [51]. The PLMN Network Name may
also be provided in a graphical format in EFPNNI. The ME shall use the text format or the graphical format or both to
display the service provider name according to the rules defined in section 4.2.89.
Identifier: '6FC6'
SFI: '1A'
Record length: X bytes, (X ≥ 8)
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 7
8
-
Structure: linear fixed
Optional
Update activity: low
ALWAYS
ADM
ADM
ADM
Description
Location Area Identity/Tracking Area Identity
PLMN Network Name Record Identifier
M/O
M
M
Length
7 bytes
1 byte
Location Area Identity/Tracking Area Identity
Contents:
Location Area Information, this comprises of the MCC, MNC and LAC
Tracking Area Identity, this comprises of the MCC, MNC and TAC
Coding:
PLMN : according to TS 24.008 [9]/TS 24.301 [51]
A BCD value of 'D' in any of the MCC and/or MNC digits shall be used to indicate a "wild" value for that
corresponding MCC/MNC digit
LAC/TAC : according to TS 24.008 [9]/TS 24.301 [51]
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
66
ETSI TS 131 102 V13.3.0 (2016-04)
Two values for the LAC/TAC are stored in order to allow a range of LAC/TAC values to be specified for a
given PLMN. A value of '0000' stored in bytes 4 to 5 and a value of 'FFFE' stored in bytes 6 to 7 shall be
used to indicate the entire range of LACs/TACs for the given PLMN. In the case where only a single
LAC/TAC value is to be specified then the value stored in bytes 4 to 5 shall be identical to the value stored
in bytes 6 to 7 for the given PLMN. If a range of LAC/TAC values are to be specified, then the value stored
in bytes 4 to 5 shall be the start of the LAC/TAC range and the value stored in bytes 6 to 7 shall be the end
of the LAC/TAC range for the given PLMN.
-
PLMN Network Name Record Identifier
Contents:
Identifier of operator name to be displayed
Coding:
A value of '00' indicates that the name is to be taken from other sources, see TS 22.101 [24]
A value in the range '01' to 'FE' indicates the record number in EFPNN that shall be displayed as the registered
PLMN name. It also indicates the record number in EFPNNI that may be displayed as the registered PLMN
name icon.
NOTE:
4.2.60
The intent of this file is to provide exceptions to the other sources of a network name. Care should be
taken not to introduce too many PLMN entries. An excessive number of entries could result in a longer
initialisation period.
EFMBDN (Mailbox Dialling Numbers)
If service n°47 is "available", this file shall be present.
This EF contains dialling numbers to access mailboxes associated with Voicemail, Fax, Electronic Mail and other
messages. It may also contain associated alpha-tags for each supported mailbox. Each dialling number shall be
associated with a message waiting indication group type using EFMBI (see TS 23.038 [5] for message waiting indication
group types).
Identifier: '6FC7'
Record length: X+14 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
X+1
X+2
X+3 to X+12
X+13
X+14
Structure: linear fixed
Optional
Update activity: low
PIN
PIN/ADM
(fixed during administrative management)
ADM
ADM
Description
Alpha Identifier
Length of BCD number/SSC contents
TON and NPI
Dialling Number/SSC contents
Capability/Configuration2 Record Identifier
Extension 6 Record Identifier
M/O
O
M
M
M
M
M
Length
X bytes
1 byte
1 byte
10 bytes
1 byte
1 byte
For contents and coding of all data items see the respective data items of the EFADN (clause 4.4.2.3), with the exception
that extension records are stored in the EFEXT6 and with the exception that Capability/Configuration parameters are
stored in the EFCCP2.
NOTE:
The value of X (the number of bytes in the alpha-identifier) may be different to the length denoted X in
EFADN.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
4.2.61
67
ETSI TS 131 102 V13.3.0 (2016-04)
EFEXT6 (Extension6)
This EF contains extension data of an MBDN (see MBDN in 4.2.60).
Identifier: '6FC8'
Record length: 13 bytes
Structure: linear fixed
Optional
Update activity: low
Access Conditions:
READ
UPDATE
PIN
PIN/ADM
(fixed during administrative management)
ADM
ADM
DEACTIVATE
ACTIVATE
Bytes
1
2 to 12
13
Description
Record type
Extension data
Identifier
M/O
M
M
M
Length
1 byte
11 bytes
1 byte
For contents and coding, see clause 4.4.2.4 (EFEXT1).
4.2.62
EFMBI (Mailbox Identifier)
If service n°47 is "available", this file shall be present.
This EF contains information to associate mailbox dialling numbers in EFMBDN with a message waiting indication group
type and subscriber profile (as defined in TS 23.097 [36]). A message waiting indication group type may either be
Voicemail, Fax, Electronic Mail, Other or Videomail (as defined in TS 23.040 [6]).
This EF contains as many records as there are subscriber profiles (shall be record to subscriber profile). Each record
contains references to mailbox dialling numbers in EFMBDN (one reference for each message waiting indication group
type).
Identifier: '6FC9'
Record length: X bytes, (X ≥ 4)
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2
3
4
5
Structure: linear fixed
Optional
Update activity: low
PIN
PIN/ADM
(fixed during administrative management)
ADM
ADM
Description
Mailbox Dialling Number Identifier – Voicemail
Mailbox Dialling Number Identifier – Fax
Mailbox Dialling Number Identifier – Electronic
Mail
Mailbox Dialling Number Identifier – Other
Mailbox Dialling Number Identifier – Videomail
M/O
M
M
M
Length
1 byte
1 byte
1 byte
M
O
1byte
1 byte
-
Mailbox Dialling Number Identifier (message waiting group type = Voicemail, Fax, Electronic Mail, Other or
Videomail).
Contents:
Identifies the mailbox dialling number to be associated with message waiting type.
Coding:
'00' – no mailbox dialling number associated with message waiting indication group type.
'xx' – record number in EFMBDN associated with message waiting indication group type.
4.2.63
EFMWIS (Message Waiting Indication Status)
If service n°48 is "available", this file shall be present.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
68
ETSI TS 131 102 V13.3.0 (2016-04)
This EF contains the status of indicators that define whether or not a Voicemail, Fax, Electronic Mail, Other or
Videomail message is waiting (as defined in TS 23.040 [6]). The ME uses the status after re-activation to determine
whether or not to display the respective message-waiting indication on its display.
This EF contains as many records as there are subscriber profiles (shall be record to subscriber profile) as defined in
TS 23.097 [36] for MSP.
Identifier: '6FCA'
Record length: X bytes, (X ≥ 5)
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2
3
4
5
6
Structure: Linear fixed
Optional
Update activity: high
PIN
PIN
ADM
ADM
Description
Message Waiting Indicator Status
Number of Voicemail Messages Waiting
Number of Fax Messages Waiting
Number of Electronic Mail Messages Waiting
Number of Other Messages Waiting
Number of Videomail Messages waiting
M/O
M
M
M
M
M
O
Length
1 byte
1 byte
1 byte
1 byte
1 byte
1 byte
Message Waiting Indication Status
Contents:
Indicates the status of the message-waiting indication.
Coding:
The indicator status for each indicator type is 1 bit long and set as follows:
bit = 1: Set Indication Active
bit = 0: Set Indication Inactive
b8
b7
B6
b5
b4
b3
b2
b1
Message
Message
Message
Message
Message
RFU
Waiting
Waiting
Waiting
Waiting
Waiting
Indication
Indication
Indication
Indication
Indication
Number of Voicemail Messages Waiting
Contents:
Contains the number of voicemail messages waiting (see TS 23.040 [6]).
Coding:
Binary.
Number of Fax Messages Waiting
Contents:
Contains the number of fax messages waiting (see TS 23.040 [6]).
Coding:
Binary.
Number of Electronic Mail Messages Waiting
Contents:
Contains the number of electronic mail messages waiting (see TS 23.040 [6])
Coding:
Binary.
Number of Other Messages Waiting
Contents:
Contains the number of other messages waiting (see TS 23.040 [6]).
ETSI
Status
Status
Status
Status
Status
–
–
–
–
-
Voicemail
Fax
Electronic Mail
Other
Videomail
3GPP TS 31.102 version 13.3.0 Release 13
69
ETSI TS 131 102 V13.3.0 (2016-04)
Coding:
Binary.
Number of Videomail Messages Waiting
Contents:
Contains the number of Videomail messages waiting (see TS 23.040 [6]).
Coding:
Binary.
4.2.64
EFCFIS (Call Forwarding Indication Status)
If service n°49 is "available", this file shall be present.
This EF contains the status of indicators that are used to record whether call forward is active. The ME uses the status
after re-activation to determine whether or not to display the respective Call Forwarding indicator on its display.
This EF contains as many records as there are subscriber profiles (shall be record to subscriber profile) as defined in
TS 23.097 [36] for MSP.
Identifier: '6FCB'
Record length: 16 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2
3
4
5 to 14
15
16
NOTE:
Structure: Linear Fixed
Optional
Update activity: low
PIN
PIN
ADM
ADM
Description
MSP number
CFU indicator status
Length of BCD number
TON and NPI
Dialling Number
Capability/Configuration2 Record Identifier
Extension 7 Record Identifier
M/O
M
M
M
M
M
M
M
Length
1 byte
1 byte
1 byte
1 byte
10 bytes
1 byte
1 byte
For contents and coding of data items not detailed below, see the respective data items of EFADN (clause
4.4.2.3), Capability/Configuration2 Record Identifier and Extension 7 Record Identifier.
MSP number:
Contents:
The MSP number contains the Profile Identity of the subscriber profile. The Profile Identity shall be between 1and 4
as defined in TS 23.097 [36] for MSP.
Coding:
Binary.
CFU indicator status:
Contents:
Indicates the status of the call forward unconditional indicator. Service code = 21 (CFU) or 002 (for CFU part of all
CF), as defined in TS 22.030 [4]
Coding:
The indicator status for each indicator type is 1 bit long and is set as follows:
bit = 1: Set indication active
bit = 0: Set indication inactive.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
B8
b7
b6
b5
b4
b3
70
b2
ETSI TS 131 102 V13.3.0 (2016-04)
b1
CFU indicator status – Voice
MMI Service code = 11 (Telephony), as defined in TS
22.030 [4]).
CFU indicator status – Fax
MMI Service code = 13 (Fax), as defined in TS 22.030
[4]).
CFU indicator status – All data teleservices
MMI Service code = 12 (Data (Teleservices)), as
defined in TS 22.030 [4]).
CFU indicator status – SMS
MMI Service code = 16 (SMS), as defined in TS 22.030
[4].
CFU indicator status – All bearer services
MMI Service code = 20 (Data (Bearer Services)), as
defined in TS 22.030 [4]).
RFU (e.g. for other MMI service codes)
4.2.65
EFEXT7 (Extension7)
This EF contains extension data of a CFIS (Call Forwarding Indication Status - see 4.2.64).
Identifier: '6FCC'
Record length: 13 bytes
Structure: linear fixed
Optional
Update activity: low
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2 to 12
13
PIN
PIN
ADM
ADM
Description
M/O
M
M
M
Record type
Extension data
Identifier
Length
1 byte
11 bytes
1 byte
For contents and coding see clause 4.4.2.4 (EFEXT1).
4.2.66
EFSPDI (Service Provider Display Information)
If service n°51 is "available", this file shall be present.
This EF contains information regarding the service provider display i.e. the service provider PLMN list.
Identifier: '6FCD'
SFI: '1B'
File size: x bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to x
Structure: transparent
Update activity: low
PIN
ADM
ADM
ADM
Description
TLV object(s) containing Service Provider
information
Tag Value
'A3'
'80'
Optional
M/O
M
Length
x bytes
Tag Description
Service provider display information Tag
Service provider PLMN list tag
The service provider display information object is a constructed TLV coded according to ISO/IEC 8825-1 [35].
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
71
ETSI TS 131 102 V13.3.0 (2016-04)
- Service provider PLMN list
Contents:
This TLV contains a list of n PLMNs in which the Service Provider Name shall be displayed, as defined in
clause 4.2.12 (EFSPN).
Coding:
Description
M/O
Length
Service provider PLMN list tag
M
1 byte
Length (see note)
M
x bytes
st
1 PLMN entry
M
3 bytes
nd
2 PLMN entry
O
3 bytes
rd
3 PLMN entry
O
3 bytes
…
th
n PLMN entry
O
3 bytes
Note: the length is 3*n bytes, where n denotes the number of PLMN entries. The length can
be coded on one or more bytes according to ISO/IEC 8825-1 [35].
Each PLMN is coded as follows:
Mobile Country Code (MCC) followed by the Mobile Network Code (MNC) according to TS 24.008 [9].
In case a PLMN entry is not used, it shall be set to 'FF FF FF'.
4.2.67
EFMMSN (MMS Notification)
If service n°52 is "available", this file shall be present.
This EF contains information in accordance with TS 23.140 [38] and X.S0016-000-A v1.0 [45] comprising MMS
notifications (and associated parameters) which have been received by the UE from the network. A 3GPP terminal
needs only to support the MMS implementation specified in TS 23.140 [38].
Identifier: "6FCE"
Structure: Linear fixed
Record length: 4+X bytes
Update activity: low
Access Conditions:
READ
PIN
UPDATE
PIN
DEACTIVATE
ADM
ACTIVATE
ADM
Bytes
Description
1 to 2
MMS Status
3
MMS Implementation
4 to X+3
MMS Notification
X+4
Extension file record number
Optional
M/O
M
M
M
M
Length
2 bytes
1 byte
X bytes
1 byte
- MMS Status
Content:
The status bytes contain the status information of the notification.
Coding:
b1 indicates whether there is valid data or if the location is free. B2 indicates whether the MMS notification has been read
or not. Bits b3-b4 of the first byte indicate the MM retrieval, MM rejection, or MM forwarding status, Bits b5-b8 of
the first byte and the entire second byte are reserved for future use.
First byte:
b8
b7
b6
b5
b4
b3
b2
b1
X
X
X
0
Free space
X
X
X
1
Used space
X
X
0
1
Notification not read
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
72
X
X
1
1
Notification read
0
0
X
1
MM not retrieved
0
1
X
1
MM retrieved
1
0
X
1
MM rejected
1
1
X
1
MM forwarded
ETSI TS 131 102 V13.3.0 (2016-04)
Reserved for future use
Second byte:
b8
b7
b6
b5
b4
b3
b2
b1
Reserved for future use
- MMS Implementation
Contents:
The MMS Implementation indicates the used implementation type, e.g. WAP.
Coding:
Allocation of bits:
Bit number Parameter indicated
1
WAP implementation of MMS as defined in TS 23.140 [38]
2
Reserved for 3GPP2: M-IMAP implementation of MMS as defined in X.S0016-000-A v1.0 [45]
3
Reserved for 3GPP2: SIP implementation of MMS as defined in X.S0016-000-A v1.0 [45]
4-8
Reserved for future use
Bit value Meaning
0
Implementation not supported.
1
Implementation supported.
- MMS Notification
Contents:
The MMS Notification contains the MMS notification.
Coding:
The MMS Notification is coded according to the MMS Implementation as indicated in Byte 3.
Any unused byte shall be set to 'FF'.
- Extension file record number
Contents:
- extension file record number. This byte identifies the number of a record in the EFEXT8 containing extension data for the
notification information. The use of this byte is optional. If it is not used it shall be set to 'FF'.
Coding:
- binary.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
4.2.68
73
ETSI TS 131 102 V13.3.0 (2016-04)
EFEXT8 (Extension 8)
If service n°53 is "available", this file shall be present.
This EF contains extension data of a MMS Notification (Multimedia Messaging Service - see 4.2.67).
Identifier: '6FCF'
Record length: X+2 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2 to X+1
X+2
Structure: linear fixed
Optional
Update activity: low
PIN
PIN
ADM
ADM
Description
Record type
Extension data
Identifier
M/O
M
M
M
Length
1 byte
X bytes
1 byte
The structure of this EF is identical to the structure of EFEXT1 (see clause 4.4.2.4).
- Record type.
Contents:
type of the record, see clause 4.4.2.4
Coding:
according to the "additional data" type
- Extension data.
Contents:
additional data (MMS notification extension)
Coding:
the first byte of the extension data gives the number of bytes of the remainder of the MMS notification in this record.
The following bytes contain the extension of the MMS notification.
- Identifier.
Contents:
identifier of the next extension record (in EXT8) to enable longer storage of information.
Coding:
record number of next record. 'FF' identifies the end of the chain.
4.2.69
EFMMSICP (MMS Issuer Connectivity Parameters)
If service n°52 is "available", this file shall be present.
This EF contains values for Multimedia Messaging Connectivity Parameters as determined by the issuer, which can be
used by the ME for MMS network connection. This file may contain one or more sets of Multimedia Messaging Issuer
Connectivity Parameters. The first set of Multimedia Messaging Issuer Connectivity Parameters is used as the default
set. Each set of Multimedia Messaging Issuer Connectivity Parameters may consist of one or more Interface to Core
Network and Bearer information TLV objects, but shall contain only one MMS implementation TLV object, one MMS
Relay/Server TLV object and one Gateway TLV object. The order of the Interface to Core Network and Bearer
information TLV objects in the MMS Connectivity TLV object defines the priority of the Interface to Core Network
and Bearer information, with the first TLV object having the highest priority.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
Identifier: '6FD0'
File Size: X1+…+ Xn bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X1
X1+1 to X1 + X2
…
X1+…+ Xn-1+1 to X1+…+ Xn
74
ETSI TS 131 102 V13.3.0 (2016-04)
Structure: Transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
MMS Connectivity Parameters TLV
object
MMS Connectivity Parameters TLV
object
…
MMS Connectivity Parameters TLV
object
M/O
M
Length
X1 bytes
O
X2 bytes
O
Xn bytes
MMS Connectivity Parameters tags
Description
MMS Connectivity Parameters Tag
MMS Implementation Tag
MMS Relay/Server Tag
Interface to Core Network and Bearer Information Tag
GatewayTag
Reserved for 3GPP2: MMS Authentication Mechanism Tag
Reserved for 3GPP2: MMS Authentication User Name Tag
-
MMS Connectivity Parameters contents
ETSI
Tag Value
'AB'
"80"
"81"
'82'
'83'
'84'
'85'
3GPP TS 31.102 version 13.3.0 Release 13
75
ETSI TS 131 102 V13.3.0 (2016-04)
Description
Value
M/O
Length (bytes)
MMS Connectivity Parameters Tag
'AB'
M
1
Length
Note 1
M
Note 2
MMS Implementation Tag
'80'
M
1
Length
1
M
1
MMS Implementation Information
-M
1
MMS Relay/Server Tag
'81'
M
1
Length
X1
M
Note 2
MMS Relay/Server Address
-M
X1
MMS Authentication Mechanism Tag
'84'
C1
1
Length
X2
C1
Note 2
MMS Authentication Mechanism
-C1
X2
MMS Authentication User Name Tag
'85'
C1
1
Length
X3
C1
Note 2
MMS Authentication User Name
-C1
X3
st
1 Interface to Core Network and
'82'
C2
1
Bearer Information Tag (highest priority)
Length
Y1
C2
Note 2
st
1 Interface to Core Network and
-C2
Y1
Bearer information
nd
2 Interface to Core Network and
'82'
C2
1
Bearer Information Tag
Length
Y2
C2
Note 2
nd
2 Interface to Core Network and
-C2
Y2
Bearer information
…
th
N Interface to Core Network and
'82'
C2
1
Bearer Information Tag (lowest priority)
Length
Y3
C2
Note 2
th
N Interface to Core Network and
-C2
Y3
Bearer information
GatewayTag
'83'
O
1
Length
Z
O
Note 2
Gateway Information
-O
Z
Note 1: This is the total size of the constructed TLV object.
Note 2: The length is coded according to ISO/IEC 8825-1 [35].
C1:
Reserved for 3GPP2: only present if M-IMAP or SIP indicated in tag 80.
C2:
Only present if WAP is indicated in tag 80.
- MMS Implementation Tag '80'
See section 4.2.67 for contents and coding.
-
MMS Relay/server Tag '81'
Contents:
The MMS relay/server contains the address of the associated MMS relay/server.
Coding:
The MMS relay/server address is coded according to the guideline provided in TS 23.140 [38].
-
MMS Authentication Mechanism Tag '84'
Contents:
The MMS authentication mechanism contains the authentication mechanism used for M-IMAP and SIP.
Coding:
The MMS authentication mechanism is coded according to the guidelines provided in X.S0016-000-A v1.0 [45].
-
MMS Authentication User Name Tag '85'
Contents:
The MMS Authentication User Name contains the authentication user name used for M-IMAP and SIP.
Coding:
The MMS authentication User Name is coded according to the guidelines provided in X.S0016-000-A v1.0 [45].
- Interface to Core Network and Bearer Information Tag '82'
Contents:
The Interface to Core Network and Bearer Information may contain the following information to set up the bearer:
Bearer, Address, Type of address, Speed, Call type, Authentication type, Authentication id, Authentication password.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
76
ETSI TS 131 102 V13.3.0 (2016-04)
Coding:
The coding is according to the guideline provided in TS 23.140 [38].
- Gateway Tag '83'
Contents:
The Gateway may contain the following information; Address, Type of address, Port, Service, Authentication type,
Authentication id and Authentication password.
Coding:
The coding is according to the guideline provided in TS 23.140 [38].
Unused bytes shall be set to 'FF'.
An Example for the coding of these parameters can be found in Annex J.2.
4.2.70
EFMMSUP (MMS User Preferences)
If service n°52 is "available", this file shall be present.
This EF contains values for Multimedia Messaging Service User Preferences, which can be used by the ME for user
assistance in preparation of mobile multimedia messages (e.g. default values for parameters that are often used).
Identifier: '6FD1'
Record Length: X bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
Structure: Linear Fixed
Optional
Update activity: low
PIN
PIN
ADM
ADM
Description
MMS User Preference TLV Objects
M/O
M
Length
X bytes
MMS User Preference tags
Description
MMS Implementation Tag
MMS User preference profile name Tag
MMS User Preference information Tag
Tag Value
'80'
'81'
'82'
MMS User Preference information
Description
Value
M/O
MMS Implementation Tag
'80'
M
Length
1
M
MMS Implementation information
-M
MMS User preference profile name Tag
'81'
M
Length
X
M
MMS User profile name
-M
MMS User Preference information Tag
'82'
M
Length
Y
M
MMS User Preference information
-M
Note:
The length is coded according to ISO/IEC 8825-1 [35]
- MMS Implementation Tag '80'
For contents and coding see 4.2.67
- MMS User preference profile name Tag '81'
Contents:
Alpha tagging of the MMS user preference profile.
Coding:
this alpha-tagging shall use either:
ETSI
Length (bytes)
1
Note
1
1
Note
X
1
Note
Y
3GPP TS 31.102 version 13.3.0 Release 13
77
ETSI TS 131 102 V13.3.0 (2016-04)
- the SMS default 7-bit coded alphabet as defined in TS 23.038 [5] with bit 8 set to 0. The alpha identifier shall be left
justified.
Or:
- one of the UCS2 coded options as defined in the annex of TS 31.101 [11].
- MMS User Preference information Tag '82'
Contents:
The following information elements may be coded; Sender Visibility, Delivery Report, Read-Reply, Priority, Time of
Expiry and Earliest Delivery Time.
Coding:
Depending upon the MMS implementation as indicated in Tag '80'.
An Example for the coding of these parameters can be found in Annex J.1.
4.2.71
EFMMSUCP (MMS User Connectivity Parameters)
If service n°52 and n°55 are "available", this file shall be present.
This EF contains values for Multimedia Messaging Connectivity Parameters as determined by the user, which can be
used by the ME for MMS network connection. This file may contain one or more sets of Multimedia Messaging User
Connectivity Parameters. Each set of Multimedia Messaging User Connectivity Parameters may consist of one or more
Interface to Core Network and Bearer information TLV objects, but shall contain only one MMS implementation TLV
object, one MMS Relay/Server TLV object and one Gateway TLV object. The order of the Interface to Core Network
and Bearer information TLV objects in the MMS Connectivity TLV object defines the priority of the Interface to Core
Network and Bearer information, with the first TLV object having the highest priority.
Identifier: '6FD2'
File Size: X1+…+ Xn bytes
Access Conditions:
READ
UPDATE
Structure: Transparent
Optional
Update activity: low
PIN
PIN/PIN2
(fixed during administrative management)
DEACTIVATE
ACTIVATE
Bytes
1 to X1
X1+1 to X1 + X2
…
X1+…+ Xn-1+1 to X1+…+ Xn
ADM
ADM
Description
MMS Connectivity Parameters TLV
object
MMS Connectivity Parameters TLV
object
…
MMS Connectivity Parameters TLV
object
M/O
O
Length
X1 bytes
O
X2 bytes
O
Xn bytes
For the contents and coding see 4.2.69
4.2.72
EFNIA (Network's Indication of Alerting)
If service n°56 is "available", this file shall be present.
This EF contains categories and associated text related to the Network's indication of alerting in the MS service defined
in TS 22.101 [24].
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
78
Identifier: '6FD3'
Record length : X+1 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2 to X+1
-
ETSI TS 131 102 V13.3.0 (2016-04)
Structure: linear fixed
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
Alerting category
Informative text
M/O
M
M
Length
1 byte
X bytes
Alerting category
Contents:
category of alerting for terminating traffic.
Coding:
according to TS 24.008 [9]. Value 'FF' means that no information on alerting category is available.
-
Informative text
Contents:
text describing the type of terminating traffic associated with the category.
Coding:
see the coding of the Alpha Identifier item of the EFADN. The maximum number of characters for this
informative text is indicated in TS 22.101 [24].
4.2.73
EFVGCS (Voice Group Call Service)
If service n°57 is "available", this file shall be present.
This EF contains a list of those VGCS group identifiers the user has subscribed to. The elementary file is used by the
ME for group call establishment and group call reception.
Identifier: '6FB1'
File size: 4n bytes, (1≤ n ≤ 50)
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 4
5 to 8
:
(4n-3) to 4n
-
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
Group ID 1
Group ID 2
:
Group ID n
M/O
M
O
:
O
Length
4 bytes
4 bytes
:
4 bytes
Group ID
Contents: VGCS Group ID, according to TS 23.003 [25]
Coding:
The VGCS Group ID is of a variable length with a maximum length of 8 digits. Each VGCS Group ID is
coded on four bytes, with each digit within the code being coded on four bits corresponding to BCD code.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
79
ETSI TS 131 102 V13.3.0 (2016-04)
If a VGCS Group ID of less than 8 digits is chosen, then the unused nibbles shall be set to 'F'. VGCS
Group ID Digit 1 is the most significant digit of the Group ID.
Byte 1:
b8
b7
b6
b5
b4
b3
b2
b1
LSB
:
:
MSB
LSB
:
:
MSB
of Digit 1 of Group ID 1
LSB
:
:
MSB
LSB
:
:
MSB
of Digit 3 of Group ID 1
LSB
:
:
MSB
LSB
:
:
MSB
of Digit 5 of Group ID 1
LSB
:
:
MSB
LSB
:
:
MSB
of Digit 7 of Group ID 1
LSB
:
:
MSB
LSB
:
:
MSB
of Digit 7 of Group ID n
of Digit 1 of Group ID 1
of Digit 2 of Group ID 1
of Digit 2 of Group ID 1
Byte 2:
b8
b7
b6
b5
b4
b3
b2
b1
of Digit 3 of Group ID 1
of Digit 4 of Group ID 1
of Digit 4 of Group ID 1
Byte 3:
b8
b7
b6
b5
b4
b3
b2
b1
of Digit 5 of Group ID 1
of Digit 6 of Group ID 1
of Digit 6 of Group ID 1
Byte 4:
b8
b7
b6
b5
b4
b3
b2
b1
of Digit 7 of Group ID 1
of Digit 8 of Group ID 1
of Digit 8 of Group ID 1
:
: etc........
Byte (4n-3) to 4n:
b8
b7
b6
b5
b4
b3
b2
b1
of Digit 7 of Group ID n
of Digit 8 of Group ID n
of Digit 8 of Group ID n
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
80
ETSI TS 131 102 V13.3.0 (2016-04)
If storage for fewer than the maximum possible number n of VGCS Group Ids, is required, the excess
bytes shall be set to 'FF'.
4.2.74
EFVGCSS (Voice Group Call Service Status)
If service n°57 is "available", this file shall be present.
This EF contains the status of activation for the VGCS group identifiers. The elementary file is directly related to the
EFVGCS. This EF shall always be allocated if EFVGCS is allocated.
Identifier: '6FB2'
File size: 7 bytes
Structure: transparent
Optional
Update activity: low
Access Conditions:
READ
UPDATE
PIN
PIN/ADM
(fixed during administrative management)
ADM
ADM
DEACTIVATE
ACTIVATE
Bytes
1 to 7
Description
Activation/Deactivation Flags
M/O
M
Length
7 bytes
Activation/Deactivation Flags
Contents:
Coding:
Activation/Deactivation Flags of the appropriate Group Ids
bit = 0 means - Group ID deactivated
bit = 1 means - Group ID activated
Byte 1:
b8
b7
b6
b5
b4
b3
b2
b1
Group ID 1
:
:
:
:
:
:
Group ID 8
etc
:
:
:
:
:
:
b7
b6
b5
b4
b3
b2
:
:
Byte 7:
b8
b1
Group ID 49
Group ID 50
b3=1
b4=1
b5=1
b6=1
b7=1
b8=1
4.2.75
EFVBS (Voice Broadcast Service)
If service n°58 is "available", this file shall be present.
This EF contains a list of those VBS group identifiers the user has subscribed to. The elementary file is used by the ME
for broadcast call establishment and broadcast call reception.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
81
Identifier: '6FB3'
File size: 4n bytes, (1 ≤ n ≤ 50)
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 4
5 to 2
:
(4n-3) to 4n
ETSI TS 131 102 V13.3.0 (2016-04)
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
M/O
M
O
:
O
Group ID 1
Group ID 2
:
Group ID n
Length
4 bytes
4 bytes
:
4 bytes
Group ID
Contents:
Coding:
VBS Group ID, according to TS 23.003 [25]
The VBS Group ID is of a variable length with a maximum length of 8 digits. Each VBS Group ID
is coded on four bytes, with each digit within the code being coded on four bits corresponding to
BCD code. If a VBS Group ID of less than 8 digits is chosen, then the unused nibbles shall be set
to 'F'. VBS Group ID Digit 1 is the most significant digit of the Group ID.
Byte 1:
b8
b7
b6
b5
b4
b3
b2
b1
LSB
:
:
MSB
LSB
:
:
MSB
of Digit 1 of Group ID 1
LSB
:
:
MSB
LSB
:
:
MSB
of Digit 3 of Group ID 1
LSB
:
:
MSB
LSB
:
:
MSB
of Digit 5 of Group ID 1
of Digit 1 of Group ID 1
of Digit 2 of Group ID 1
of Digit 2 of Group ID 1
Byte 2:
b8
b7
b6
b5
b4
b3
b2
b1
of Digit 3 of Group ID 1
of Digit 4 of Group ID 1
of Digit 4 of Group ID 1
Byte 3:
b8
b7
b6
b5
b4
b3
b2
b1
of Digit 5 of Group ID 1
of Digit 6 of Group ID 1
of Digit 6 of Group ID 1
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
82
ETSI TS 131 102 V13.3.0 (2016-04)
Byte 4:
b8
b7
b6
b5
b4
b3
b2
b1
LSB
:
:
MSB
LSB
:
:
MSB
of Digit 7 of Group ID 1
LSB
:
:
MSB
LSB
:
:
MSB
of Digit 7 of Group ID n
of Digit 7 of Group ID 1
of Digit 8 of Group ID 1
of Digit 8 of Group ID 1
:
: etc........
Byte (4n-3) to 4n:
b8
b7
b6
b5
b4
b3
b2
b1
of Digit 7 of Group ID n
of Digit 8 of Group ID n
of Digit 8 of Group ID n
If storage for fewer than the maximum possible number n of VBS Group Ids, is required, the excess bytes shall be set to
'FF'.
4.2.76
EFVBSS (Voice Broadcast Service Status)
If service n°58 is "available", this file shall be present.
This EF contains the status of activation for the VBS group identifiers. The elementary file is directly related to the
EFVBS. This EF shall always be allocated if EFVBS is allocated.
Identifier: '6FB4'
File size: 7 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 7
Structure: transparent
Optional
Update activity: low
PIN
PIN/ADM
(fixed during administrative management)
ADM
ADM
Description
Activation/Deactivation Flags
Activation/Deactivation Flags
Contents:
Coding:
Activation/Deactivation Flags of the appropriate Group Ids
see coding of EFVGCSS
ETSI
M/O
M
Length
7 bytes
3GPP TS 31.102 version 13.3.0 Release 13
4.2.77
83
ETSI TS 131 102 V13.3.0 (2016-04)
EFVGCSCA (Voice Group Call Service Ciphering Algorithm)
If service n°64 is "available", this file shall be present.
This EF contains the ciphering algorithm identifiers for each of the Master Group Key (V_Ki) of each VGCS group that
the user has subscribed to (defined in EFVGCS).
Identifier: '6FD4'
File size: 2n bytes, (1 ≤ n ≤ 50)
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2
3
4
:
2n-1
2n
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
VGCS Group ciphering algorithm identifier for
st
1 V_Ki of Group 1
VGCS Group ciphering algorithm identifier for
nd
2 V_Ki of Group 1
VGCS Group ciphering algorithm identifier for
st
1 V_Ki of Group 2
VGCS Group ciphering algorithm identifier for
nd
2 V_Ki of Group 2
:
VGCS Group ciphering algorithm identifier for
st
1 V_Ki of Group n
VGCS Group ciphering algorithm identifier for
nd
2 V_Ki of Group n
M/O
M
Length
1 byte
M
1 byte
O
1 byte
O
1 byte
:
O
:
1 byte
O
1 byte
Ciphering Algorithm Identifier:
Contents: Ciphering Algorithm identifier for the specified Master Group Key of each Voice Call Group
Coding:
Value
"00" no ciphering
"01" ciphering with algorithm GSM A5/1
"02" ciphering with algorithm GSM A5/2
"03" ciphering with algorithm GSM A5/3
"04" ciphering with algorithm GSM A5/4
"05" ciphering with algorithm GSM A5/5
"06" ciphering with algorithm GSM A5/6
"07" ciphering with algorithm GSM A5/7
"08" to "FF" RFU
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
4.2.78
84
ETSI TS 131 102 V13.3.0 (2016-04)
EFVBSCA (Voice Broadcast Service Ciphering Algorithm)
If service n°65 is "available", this file shall be present.
This EF contains the ciphering algorithm identifiers for each of the Master Group Key (V_Ki) of each VBS group that
the user has subscribed to (defined in EFVBS).
Identifier: '6FD5'
File size: 2n bytes, (1 ≤ n ≤ 50)
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2
3
4
:
2n-1
2n
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
st
VBS Group ciphering algorithm identifier for 1
V_Ki of Group 1
VBS Group ciphering algorithm identifier for
nd
2 V_Ki of Group 1
st
VBS Group ciphering algorithm identifier for 1
V_Ki of Group 2
VBS Group ciphering algorithm identifier for
nd
2 V_Ki of Group 2
:
st
VBS Group ciphering algorithm identifier for 1
V_Ki of Group n
VBS Group ciphering algorithm identifier for
nd
2 V_Ki of Group n
M/O
M
Length
1 byte
M
1 byte
O
1 byte
O
1 byte
:
O
:
1 byte
O
1 byte
Ciphering Algorithm Identifier:
Contents:
Coding:
4.2.79
Ciphering Algorithm identifier for the specified Master Group Key of each Voice Broadcast Group
See coding of EFVGCSCA
EFGBABP (GBA Bootstrapping parameters)
If service n°68 is "available", this file shall be present.
This EF contains the AKA Random challenge (RAND) and Bootstrapping Transaction Identifier (B-TID) associated
with a GBA bootstrapping procedure.
Identifier: '6FD6'
File length: L+X+N+3 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2 to (X +1)
X+2
(X+3) to (X+2+L)
X+L+3
(X+L+4) to
(X+L+N+3)
Structure: transparent
Optional
Update activity: low
PIN
PIN
ADM
ADM
Description
Length of RAND (X)
RAND
Length of B-TID (L)
B-TID
Length of key lifetime
Key lifetime
M/O
M
M
M
M
M
M
Length of RAND
Contents:
number of bytes, not including this length byte, of RAND field
ETSI
Length
1 byte
X bytes
1 byte
L bytes
1 byte
N bytes
3GPP TS 31.102 version 13.3.0 Release 13
85
ETSI TS 131 102 V13.3.0 (2016-04)
RAND
Contents:
Coding:
Random challenge used in the GBA_U bootstrapping procedure.
as defined in TS 33.103 [13]
Length of B-TID
Contents:
number of bytes, not including this length byte, of B-TID field
B-TID
Content:
Coding:
Bootstrapping Transaction Identifier the GBA_U bootstrapped keys
As defined in TS 33.220 [42]
Length of key lifetime
Contents:
number of bytes, not including this length byte, of key lifetime field
Key lifetime
Content:
Coding:
4.2.80
Lifetime of the GBA_U bootstrapped keys
As defined in TS 33.220 [42]
EFMSK (MBMS Service Keys List)
If service n°69 is "available", this file shall be present.
A record of this EF contains the list of MBMS Service Keys (MSK) and associated parameters, which are related to an
MBMS Key Domain. There are up to two MSKs per Key Domain ID/Key Group ID pair, where the Key Group ID is
the Key Group part of the MSK ID as defined in TS 33.246 [43]. Two 4 byte MSK IDs stored within a record have the
same value for the 2 byte Key Group part.
Identifier: '6FD7'
Structure: linear fixed
Optional
Record length: 8n+4 bytes, (n ≥ 2)
Update activity: high
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 3
4
PIN
ADM
ADM
ADM
5 to 8
9 to 12
13 to 16
17 to 20
:
8(n-1)+5 to 8n
Description
Key Domain ID
Number of stored MSK IDs and
corresponding TS
st
1 MSK ID
st
1 Time Stamp Counter (TS)
nd
2 MSK ID
nd
2 Time Stamp Counter (TS)
:
th
n MSK ID
8n+1 to 8n+4
n Time Stamp Counter (TS)
th
M/O
M
M
Length
3 bytes
1 byte
M
M
M
M
:
O
(See Note)
C
(See Note)
4 bytes
4 bytes
4 bytes
4 bytes
:
4 bytes
Note: In the current version of the specification, these bytes are RFU.
Key Domain ID:
Content:
Coding:
Identifier of the Domain of the BM-SC providing MBMS Service.
As defined in TS 33.246 [43]
ETSI
4 bytes
3GPP TS 31.102 version 13.3.0 Release 13
86
ETSI TS 131 102 V13.3.0 (2016-04)
Number of stored MSK IDs and corresponding TS:
Content: Number of stored MSK IDs and corresponding Time Stamp counter (TS) within the record, as defined in
TS 33.246 [43]. This number shall not exceed the maximum limit of MSK IDs fixed in TS 33.246 [43] (e.g if the
maximum number of MSK IDs is 2, then this byte may only take the following values: '00', '01', '02').
Coding: binary.
MSK ID:
Content:
Coding:
Identifier of MBMS Service Key (MSK) within a particular Key Domain.
As defined in TS 33.246 [43]
Time Stamp Counter (TS):
Content:
Coding:
Counter for MIKEY replay protection in MTK delivery. Each counter is associated with a
particular MSK.
As defined in TS 33.246 [43]
Any unused bytes shall be set to 'FF'.
4.2.81
EFMUK (MBMS User Key)
If service n°69 is "available", this file shall be present.
This EF contains the identifier of the MBMS User Key (MUK) that is used to protect the transfer of MBMS Service
Keys (MSK). The file also contains the Time Stamp Counter associated with the MUK, which is used for Replay
Protection in MSK transport messages. This EF shall not contain MUK IDs with the same Idi part.
Identifier: '6FD8'
Record length: Z bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to Z
Structure: linear fixed
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
MBMS User Key TLV objects
M/O
M
Bytes
1 to Z
MBMS User Key tags
Description
Tag Value
MUK ID Tag
'A0'
Time Stamp Counter Tag
'81'
MBMS User Key information
Description
Value
MUK ID Tag
'A0'
Length
X
MUK Idr Tag
'80'
Lenght
A
MUK Idr value
-MUK Idi Tag
'82'
Lenght
W
MUK Idi Value
Time Stamp Counter Tag
'81'
Length
Y
Time Stamp Counter value
-Note:
The length is coded according to ISO/IEC 8825-1 [35]
M/O
Length (bytes)
M
M
M
M
M
M
M
M
M
M
M
1
Note
1
Note
A
1
Note
W
1
Note
Y
- MUK ID Tag 'A0'. This constructed data object consists of the Idr, and the Idi
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
87
ETSI TS 131 102 V13.3.0 (2016-04)
- Idr Tag '80'
Content:
Idr part of MBMS User Key (MUK).
Coding:
As defined in TS 33.246 [43]
- Idi Tag '82'
Content:
Idi part of MBMS User Key (MUK).
Coding:
As defined in TS 33.246 [43]
- Time Stamp Counter Tag '81'
Content:
Counter for MIKEY replay protection in MSK delivery. The counter is associated with the particular MUK. The
length value is defined in TS 33.246 [43].
Coding:
As defined in TS 33.246 [43]
Unused bytes shall be set to 'FF'.
4.2.82
Void
4.2.83
EFGBANL (GBA NAF List)
If service n°68 is "available", this file shall be present.
This EF contains the list of NAF_ID and B-TID associated to a GBA NAF derivation procedure.
Identifier: '6FDA'
Record length: Z bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to Z
Structure: Linear fixed
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
NAF Key Identifier TLV objects
M/O
M
Length
Z bytes
NAF Key Identifier tags
Description
Tag Value
NAF_ID Tag
'80'
B-TID Tag
'81'
NAF Key Identifier information
Description
Value
NAF_ID Tag
'80'
Length
X
NAF_ID value
-B-TID Tag
'81'
Length
Y
B-TID value
-Note:
The length is coded according to ISO/IEC 8825-1 [35]
- NAF_ID Tag '80'
ETSI
M/O
Length (bytes)
M
M
M
M
M
M
1
Note
X
1
Note
Y
3GPP TS 31.102 version 13.3.0 Release 13
88
ETSI TS 131 102 V13.3.0 (2016-04)
Contents:
Identifier of Network Application Function used in the GBA_U NAF Derivation procedure.
Coding:
As defined in TS 33.220 [42]
- B-TID Tag '81'
Content:
Bootstrapping Transaction Identifier of the GBA_U bootstrapped key
Coding:
As defined in TS 33.220 [42]
Unused bytes shall be set to 'FF'
4.2.84
EFEHPLMN (Equivalent HPLMN)
If service n°71 is "available", this file shall be present.
This EF contains the coding for n EHPLMNs. The usage of EHPLMN is defined in TS 23.122 [31]. This data field may
contain the HPLMN code derived from the IMSI as an EHPLMN entry.
Identifier: '6FD9'
SFI: '1D'
File size: 3n, (n ≥1)
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 3
4 to 6
:
(3n-2) to (3n)
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
st
1 EHPLMN (highest priority)
nd
2 EHPLMN
:
th
n EHPLMN (lowest priority)
M/O
M
O
Length
3 bytes
3 bytes
O
3 bytes
- EHPLMN
Contents:
- Mobile Country Code (MCC) followed by the Mobile Network Code (MNC).
Coding:
- according to TS 24.008 [9].
Unused entries shall be set to 'FF FF FF'
4.2.85
EFEHPLMNPI (Equivalent HPLMN Presentation Indication)
If service n°71 and service n°73 are "available", this file shall be present.
This EF contains an indication to the ME for the presentation of the available EHPLMN(s). The usage of the EHPLMN
presentation indication is defined in TS 23.122 [31].
Identifier: '6FDB'
File size: 1 byte
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
EHPLMN Presentation Indication
ETSI
M/O
M
Length
1 byte
3GPP TS 31.102 version 13.3.0 Release 13
89
ETSI TS 131 102 V13.3.0 (2016-04)
-
EHPLMN Presentation Indication:
Contents:
EHPLMN display mode
Coding:
- '00' - No preference for the display mode
- '01' - Display the highest-priority available EHPLMN only
- '02' - Display all the available EHPLMNs
- All other values are RFU
4.2.86
EFLRPLMNSI (Last RPLMN Selection Indication)
If service n°74 is "available", this file shall be present.
This EF contains an indication to the ME for the selection of the RPLMN or the home network at switch on, or
following recovery from lack of coverage. The usage of the Last RPLMN Selection Indication is defined in
TS 23.122 [31].
Identifier: '6FDC'
File size: 1 byte
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
Last RPLMN Selection Indication
M/O
M
Length
1 byte
-
Last RPLMN Selection Indication:
Contents:
Last RPLMN Selection Indication
Coding:
- '00' - The UE shall attempt registration on the last RPLMN at switch-on or recovery from out-of-coverage as
described in TS 23.122 [31]
- '01' - The UE shall attempt registration either on the HPLMN or the last RPLMN at switch-on or recovery from outof-coverage as described in TS 23.122 [31]
- All other values are RFU
4.2.87
EFNAFKCA (NAF Key Centre Address)
If service n°68 and service n°76 are "available", this file shall be present.
This EF contains one or more NAF Key Centre addresses. The first record in the EF shall be considered to be of the
highest priority. The last record in the EF shall be considered to be the lowest priority.
Identifier: '6FDD'
Record length: Z bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to Z
Structure: Linear fixed
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
NAF Key Centre TLV object
Unused bytes shall be set to 'FF'.
NAF Key Centre tags
ETSI
M/O
M
Length
Z bytes
3GPP TS 31.102 version 13.3.0 Release 13
90
ETSI TS 131 102 V13.3.0 (2016-04)
Description
NAF Key Centre address Tag
Tag Value
'80'
NAF Key Centre information
Description
Value
M/O
NAF Key Centre address Tag
'80'
M
Length
X
M
NAF Key Centre address value
-M
Note:
The length is coded according to ISO/IEC 8825-1 [35].
-
Length (bytes)
1
Note
X
NAF Key Centre Address value (Tag '80')
Contents:
Fully qualified Domain Name (FQDN) of the NAF Key Centre used in the Local Key Establishment
procedures (see TS 33.110 [47]).
Coding:
Encoded to an octet string according to UTF-8 encoding rules as described in IETF RFC 3629 [48].
4.2.88
EFSPNI (Service Provider Name Icon)
If service n°78 is "available", this file shall be present.
This EF may contain one or several links to the service provider name icon. When more than one link is available, it is
up to the ME to choose the link type to be used (e.g. the link type that is supported by the ME). The requirements for
the display by the ME are defined in section 4.2.12.
Identifier: '6FDE'
File Size: X bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
Structure: transparent
Optional
Update activity: low
ALWAYS
ADM
ADM
ADM
Description
Icon TLV object(s)
M/O
M
Length
X bytes
This file may contain one or several service provider name Icon TLV object(s). The coding of the service provider name
Icon TLV objects is described hereafter:
Length
Description
Value
Status
1 byte
Icon Tag (See Note 1)
-M
1 byte
Length (see Note 2)
Y+1
M
1 byte
Icon Qualifier
-M
Y bytes
Icon Link
-M
Note 1: The tag value indicates the type and format of the Icon Link that is provided in the TLV value
field (e.g. Tag '80' indicates that the Icon link is a URI, while Tag '81' indicates that the Icon Link is the
record number of the corresponding image in EFIMG).
Note 2: coded according to ISO/IEC 8825-1 [35].
-
Icon Tag
Contents: Tag value.
- When the Icon Link is an URI, the Tag value shall be set to '80'.
- When the Icon Link is a pointer to the record number of the corresponding image in EFIMG, the Tag value
shall be set to '81'.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
91
ETSI TS 131 102 V13.3.0 (2016-04)
- All other values are RFU.
Coding: binary.
- Icon Qualifier
Contents: The icon qualifier indicates to the ME how the icon shall be used.
- '01' = icon is self-explanatory, i.e. if displayed, it replaces the corresponding name in text format.
- '02' = icon is not self-explanatory, i.e. if displayed, it shall be displayed together with the corresponding
name in text format.
- All other values are RFU.
Coding: binary.
-
Icon Link
Contents: Link to the icon. This link shall point to a UICC resource.
Coding:
- When the Tag value indicates an URI (i.e. Tag = '80') , the Icon Link shall be encoded to an octet string
according to UTF-8 encoding rules as described in IETF RFC 3629 [48] (e.g.
http://127.0.0.1:3516/pub/files/spng.jpg).
- When the Tag value indicates that the Icon Link contains the record number of the corresponding image in
EFIMG (i.e. Tag = '81'), the Icon Link shall be encoded in binary.
4.2.89
EFPNNI (PLMN Network Name Icon)
If service n°79 is "available", this file shall be present.
This EF contains one or several links to the PLMN network name icon. When more than one link is available in a
record, it is up to the ME to choose the link type to be used (e.g. the link type that is supported by the ME).
Identifier: '6FDF'
Record length: X bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
Structure: linear fixed
Optional
Update activity: low
ALWAYS
ADM
ADM
ADM
Description
Icon TLV object(s)
M/O
M
Length
X bytes
Each record may contain one or several PLMN network name Icon TLV object(s). The coding of the Icon TLV
object(s) is described in EFSPNI.
4.2.90
EFNCP-IP (Network Connectivity Parameters for USIM IP connections)
If service n°80 is "available", this file shall be present.
This EF contains the network activation parameters to be used by the ME for establishing a data channel (e.g. PDP
context activation) for UICC remote IP connectivity as described in ETSI TS 102 483 [50].
Each record contains a network connectivity parameters set. A network connectivity parameters set may comprise an
Access Point Name, a Login and Password of the Access Point Name, a Data Destination Address Range and the Bearer
Description. The priority order of the different Network Connectivity Parameters sets is the same as the order of the
record numbers.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
92
ETSI TS 131 102 V13.3.0 (2016-04)
Each network connectivity parameters set provides a condition and the network connectivity parameters to be used
when this condition is met:
-
The network activation parameters present in a record shall be associated with this Data Destination Address
Range in the same record (i.e. if a record contains a Data Destination Address Range, all IP packets that are sent
by the UICC to any network destination address belonging to this Address Range shall transit through a network
connection established using the parameters provided in that record).
Note: A Data Destination Address Range TLV with a zero length prefix matches all addresses of the
address type.
In a record, if the Access Point Name has a value part, the associated Login and Password may be provided. If
supported by the ME, the Login and Password may be used for Access Point Name authentication. If only the Login is
present, the ME shall use its default Password configuration if any. If the Login and Password are not present, the ME
shall use its default Login/Password configuration if any. If no authentication is requested, the Login and Password
shall be ignored. The Password TLV can only be provided in a record if a Login TLV is provided in the same record.
In any record, if the Access Point Name has no value part, the ME may use its default Access Point Name or the default
subscription value together with the other network connectivity parameters of that record.
When present, the Bearer Description TLV provides recommended values for parameters that the ME should use to
establish the data link for UICC remote IP connections. However if the ME or network does not support these values,
the ME selects the most appropriate values.
Structure of EFNCP-IP
Identifier: '6FE2'
Record length: Z bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to M
M+1 to M+N
M+N+1 to
M+N+O
M+N+O+1 to
M+N+O+P
M+N+O+P+1
to
M+N+O+P+Q
-
Structure: linear fixed
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
Data Destination Address Range TLV
Access Point Name TLV
Login TLV
M/O
M
M
C
Length
M bytes
N bytes
O bytes
Password TLV
C
P bytes
Bearer description TLV
C
Q bytes
Access Point Name TLV
Contents: Access Point Name provides information to the ME necessary to identify the Gateway entity which
provides interworking with an external packet data network.
Coding:
the coding of the Access Point Name TLV object is described hereafter. The Access Point Name
Value is coded as defined in TS 23.003 [25].
Length Description
1 byte
Access Point Name Tag
1 byte
Length (see note 1)
1 byte
Access Point Name Value
Note 1: coded according to ISO/IEC 8825-1 [35].
-
Login TLV
Contents: the login of the Access Point Name.
ETSI
Value
80
X
--
Status
M
M
M
3GPP TS 31.102 version 13.3.0 Release 13
Coding:
93
the coding of the Login TLV object is described hereafter. The Login Value is coded as for SMS Data
coding scheme defined in TS 23.038 [5]. Parts of the data coding scheme other than the character set
indication shall be ignored.
Length Description
1 byte
Login Tag
1 byte
Length (see note 1)
1 byte
Login Value
Note 1: coded according to ISO/IEC 8825-1 [35].
-
Value
81
X
--
Status
M
M
M
Password TLV
Contents: the password of the Access Point Name.
Coding:
the coding of the Password TLV object is described hereafter. The Password Value is coded as for
SMS Data coding scheme defined in TS 23.038 [5]. Parts of the data coding scheme other than the
character set indication shall be ignored.
Length Description
1 byte
Password Tag
1 byte
Length (see note 1)
1 byte
Password Value
Note 1: coded according to ISO/IEC 8825-1 [35].
-
ETSI TS 131 102 V13.3.0 (2016-04)
Value
82
X
--
Status
M
M
M
Data Destination Address Range TLV
Contents: the data destination address or the range of data destination addresses.
Coding:
the coding of the Data Destination Address Range TLV object is described hereafter.
Length
1 byte
1 byte
1 byte
1 byte
Description
Data Destination Address Range Tag
Length (see note1)
Type of Address
Prefix length (in bits)
0 to 16
Prefix
bytes
Note 1: coded according to ISO/IEC 8825-1 [35].
-
Value
83
X
-'00' to
'20' for
Ipv4
'00' to
'80' for
Ipv6
--
Status
M
M
M
M
Type of Address
Contents: the type of data destination address range.
Coding:
-
-
'21' = Ipv4 address range;
-
'57' = Ipv6 address range;
-
Other values are RFU.
Prefix length
Contents: the number N of valid bits of the prefix of the address range. A prefix length of zero denotes the
default "all IP addresses" range.
Coding: binary
-
Prefix
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
94
ETSI TS 131 102 V13.3.0 (2016-04)
Contents: Prefix, i.e. the leftmost bits of the address range. All addresses where the leftmost N bits match
the prefix belong to the address range.
Coding:
-
-
the leftmost N bits encode the prefix of the address range. If N is not an integer multiple of 8, the
prefix is right padded with zeroes to the next octet boundary.
Bearer Description TLV
Contents: bearer description.
Coding:
the coding of the Bearer Description TLV object is described hereafter. The Bearer Description Value
is encoded as the value part of the "Bearer description" TLV data object defined in TS 31.111 [12].
Length Description
1 byte
Bearer Description Tag
1 byte
Length (see note 1)
1 byte
Bearer Description Value
Note 1: coded according to ISO/IEC 8825-1 [35].
Value
84
X
--
Status
M
M
M
Any unused bytes shall be set to 'FF'.
4.2.91
EFEPSLOCI (EPS location information)
If service n°85 is "available", this file shall be present.
This EF contains the following EPS location information:
-
Globally Unique Temporary Identifier (GUTI);
Last visited registered Tracking Area Identity (TAI);
EPS update status.
Identifier: '6FE3'
SFI: '1E'
File size: 18 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 12
13 to17
18
-
Structure: transparent
Optional
Update activity: high
PIN
PIN
ADM
ADM
Description
GUTI
Last visited registered TAI
EPS update status
M/O
M
M
M
Length
12 bytes
5 bytes
1 byte
GUTI.
Contents:
Globally Unique Temporary Identifier.
Coding:
as the GUTI part of the EPS mobile identity information element defined in TS 24.301 [51]. Byte 1
corresponds to "octet 2" of an EPS mobile identity information element containing a GUTI. Byte 12
corresponds to "octet 13" of an EPS mobile identity information element information element containing
a GUTI.
Byte 1: first byte of GUTI
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
b8
b7
b6
b5
95
b4
b3
ETSI TS 131 102 V13.3.0 (2016-04)
b2
b1
MSB
-
Last visited registered TAI
Contents:
Last visited registered Tracking Area Identity.
Coding:
as the content of the tracking area identity information element defined in TS 24.301 [51]. Byte 13
corresponds to "octet 2" of a tracking area identity information element. Byte 17 corresponds to "octet 6"
of a tracking area identity information element.
Byte 13: first byte of last visited registered TAI
b8
b7
b6
b5
b4
b3
b2
b1
MSB
-
EPS update status.
Contents:
status of EPS update according to TS 24.301 [51].
Coding:
byte 18:
Bits:
b3 b2 b1.
0
0
0 :
0
0
1 :
0
1
0 :
0
1
1 :
1
0
0 :
1
0
1 :
1
1
0 :
1
1
1 :
Bits b4 to b8 are RFU (see TS 31.101 [11]).
UPDATED.
NOT UPDATED.
ROAMING NOT ALLOWED.
reserved.
reserved.
reserved.
reserved.
reserved.
Unused bytes shall be set to 'FF'.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
4.2.92
96
ETSI TS 131 102 V13.3.0 (2016-04)
EFEPSNSC (EPS NAS Security Context)
If service n°85 is "available", this file shall be present.
This EF contains the EPS NAS Security context as defined in TS 33.401 [52]. This file shall contain only one record.
Identifier: '6FE4'
SFI: '18'
Record size: X bytes (X≥54)
Structure: linear fixed
Update activity: high
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
Optional
PIN
PIN
ADM
ADM
Description
EPS NAS Security Context TLV Object
M/O
M
Length
X bytes
EPS NAS Security Context tags
Description
EPS NAS Security Context Tag
Tag Value
'A0'
EPS NAS Security Context information
Description
Value
M/O
EPS NAS Security Context Tag
'A0'
M
Length (length of all subsequent data)
Y
M
Key set identifier KSIASME Tag
'80'
M
Length
K
M
Key set identifier KSIASME
-M
ASME key (KASME) Tag
'81'
M
Length
L
M
ASME key (KASME)
-M
Uplink NAS count Tag
'82'
M
Length
M
M
Uplink NAS count
-M
Downlink NAS count Tag
'83'
M
Length
N
M
Downlink NAS count
-M
Identifiers of selected NAS integrity and
'84'
M
encryption algorithms Tag
Length
S
M
Identifiers of selected NAS integrity and
-M
encryption algorithms
Note 1: The length is coded according to ISO/IEC 8825-1 [35]
-
Length (bytes)
1
Note 1
1
Note 1
K
1
Note 1
L
1
Note 1
M
1
Note 1
N
1
Note 1
S
Key set identifier KSIASME Tag '80'
Contents:
The ASME key set identifier as defined in TS 33.401 [52]. In this release the KSIASME is coded on 1 byte.
Coding:
b8
b7
b6
b5
b4
b3
b2
b1
KSIASME
bits b4 to b8 are coded 0
-
ASME key (KASME) Tag '81'
Contents:
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
97
ETSI TS 131 102 V13.3.0 (2016-04)
The ASME Key as defined in TS 33.401 [52]. In this release a valid ASME key is coded on 32 bytes. The
ME shall treat any ASME key values stored in this EF as invalid if the ASME key set identifier indicates
that no ASME key is available or if the length indicated in the ASME key TLV is set to '00',
Coding:
The most significant bit of KASME is the most significant bit of the 1st byte of this TLV value field. The least
significant bit of KASME is the least significant bit of the last byte of this TLV value field.
-
Uplink NAS count Tag '82'
Contents:
The uplink NAS count as defined in TS 33.401 [52]. In this release the Uplink NAS count is coded on 4
bytes.
Coding:
The most significant bit of the uplink NAS count is the most significant bit of the 1st byte of this TLV value
field. The least significant bit of the uplink NAS count is the least significant bit of the last byte of this
TLV value field.
-
Downlink NAS count Tag '83'
Contents:
The downlink NAS count as defined in TS 33.401 [52]. In this release the downlink NAS count is coded on 4
bytes.
Coding:
The most significant bit of the downlink NAS count is the most significant bit of the 1st byte of this TLV
value field. The least significant bit of the downlink NAS count is the least significant bit of the last byte
of this TLV value field.
-
Identifiers of selected NAS integrity and encryption algorithms Tag '84'
Contents:
The identifiers of selected NAS integrity and encryption algorithms as defined in TS 33.401 [52] and TS
24.301 [51]. In this release the identifiers of selected NAS integrity and encryption algorithms are coded
on 1 byte.
Coding:
as the content of the NAS security algorithms information element defined in TS 24.301 [51].
Byte 1 of this TLV value field: first byte of the NAS security algorithms information element
b8
b7
b6
b5
b4
b3
b2
b1
MSB
Unused bytes shall be set to 'FF'.
In order to mark the stored EPS NAS security context as invalid:
- the record bytes shall be set to 'FF', or
- the KSIASME is set to '07', or
- the length indicated in the ASME key TLV is set to '00'.
4.2.93
EFUFC (USAT Facility Control)
This EF contains data for USAT Facility Control related to AT commands for USAT (see TS 31.111 [12]).
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
Identifier: '6FE6'
File size: X bytes, (X ≥ 1)
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
98
ETSI TS 131 102 V13.3.0 (2016-04)
Structure: transparent
Optional
Update activity: low
ALW
ADM
ADM
ADM
Description
M/O
M
Facility list
Length
X bytes
The facility list has the same format as the TERMINAL PROFILE defined in TS 31.111 [12].
By setting the corresponding bits to 1, the facility list defines facilities which can only be provided by the MT and
which are not allowed to be provided by the TE.
If a TERMINAL PROFILE is longer than the facility list, for the purpose of facility control, the exceeding bytes of the
TERMINAL PROFILE shall be compared according to the generic rules found in TS 31.111 [12].
4.2.94
EFNASCONFIG (Non Access Stratum Configuration)
If service n°96 is "available", this file shall be present. This EF contains NAS configuration parameters defined in
TS 24.368 [65]. For each NAS configuration parameter, a parameter provided in EFNASCONFIG shall take precedence over
the corresponding parameter stored in the ME's non-volatile memory.
Identifier: '6FE8'
File size: Z bytes
Access Conditions:
READ
UPDATE
ACTIVATE
DEACTIVATE
Bytes
1 to Z
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
NAS configuration parameter TLV objects
M/O
M
Length
Z bytes
NAS configuration parameter information
Description
Value
ETSI
M/O/C
Length (bytes)
3GPP TS 31.102 version 13.3.0 Release 13
99
NAS signalling priority Tag
'80'
Length
L1
NAS signalling priority value
-NMO I Behaviour Tag
'81'
Length
L2
NMO I Behaviour value
-Attach with IMSI Tag
'82'
Length
L3
Attach with IMSI value
-Minimum Periodic Search Timer Tag
'83'
Length
L4
Minimum Periodic Search Timer value
-Extended access barring Tag
'84'
Length
L5
Extended access barring value
-Timer T3245 Behaviour Tag
'85'
Length
L6
Timer T3245 Behaviour value
-Override NAS signalling low priority Tag
'86'
Length
L7
Override NAS signalling low priority
-value
Override Extended access barring Tag
'87'
Length
L8
Override Extended access barring value
-Fast First Higher Priority PLMN Search
'88'
Tag
Length
L9
Fast First Higher Priority PLMN value
-E-UTRA Disabling Allowed for EMM
'89'
cause #15 Tag
Length
L10
E-UTRA Disabling Allowed for EMM
cause #15 Value
SM_RetryWaitTime Tag
'8A'
Length
L11
SM_RetryWaitTime value
-SM_RetryAtRATChange Tag
'8B'
Length
L12
SM_RetryAtRATChange value
-Note 1 : The length is coded according to ISO/IEC 8825-1 [35]
Note 2: C; if the Tag is present, this is mandatory.
ETSI TS 131 102 V13.3.0 (2016-04)
O
C
C
O
C
C
O
C
C
O
C
C
O
C
C
O
C
C
O
C
C
1
Note 1
L1
1
Note 1
L2
1
Note 1
L3
1
Note 1
L4
1
Note 1
L5
1
Note 1
L6
1
Note 1
L7
O
C
C
O
1
Note 1
L8
1
C
C
O
Note 1
L9
1
C
C
Note 1
L10
O
C
C
O
C
C
1
Note 1
L11
1
Note 1
L12
- NAS signalling priority
Contents:
As described in TS 24.368 [65], used to determine the NAS signalling priority included in NAS messages.
Coding:
As defined for the NAS_SignallingPriority leaf in TS 24.368 [65].
- NMO I Behaviour
Content:
As described in TS 24.368 [65], indicates whether the "NMO I, Network Mode of Operation I" indication is
applied by the UE.
Coding:
b8
b7
b6
b5
b4
b3
b2
b1
b1 value to be interpreted as defined for the
NMO_I_Behaviour leaf in TS 24.368 [65].
RFU (see TS 31.101 [11])
- Attach with IMSI
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
100
ETSI TS 131 102 V13.3.0 (2016-04)
Content:
As described in TS 24.368 [65], indicates whether attach with IMSI is performed when moving to a nonequivalent PLMN.
Coding:
b8
b7
b6
b5
b4
b3
b2
b1
b1 value to be interpreted as defined for the
AttachWithIMSI leaf in TS 24.368 [65].
RFU (see TS 31.101 [11])
- Minimum Periodic Search Timer
Content:
As described in TS 24.368 [65], gives a minimum value in minutes for the timer T controlling the periodic
search for higher prioritized PLMNs. The content applies a minimum value that may override the value in file
EFHPPLMN (Higher Priority PLMN search period), as specified in TS 23.122 [31] clause 4.4.3.3.1.
Coding:
As defined for the MinimumPeriodicSearchTimer leaf in TS 24.368 [65].
- Extended access barring
Content:
As described in TS 24.368 [65], indicates whether the UE applies extended access barring.
Coding:
b8
b7
b6
b5
b4
b3
b2
b1
b1 value to be interpreted as defined for
ExtendedAccessBarring leaf in TS 24.368 [65].
RFU (see TS 31.101 [11])
- Timer T3245 Behaviour
Content:
As described in TS 24.368 [65], indicates whether the timer T3245 and the related functionality is used by the
UE.
Coding:
b8
b7
b6
b5
b4
b3
b2
b1
b1 value to be interpreted as defined for
Timer_T3245_Behaviour leaf in TS 24.368 [65].
RFU (see TS 31.101 [11])
- Override NAS signalling low priority
Contents:
As described in TS 24.368 [65], used to determine whether the NAS signalling priority included in NAS
messages can be overriden.
Coding:
b8
b7
b6
b5
b4
b3
b2
b1
b1 value to be interpreted as defined for the
Override_NAS_SignallingLowPriority leaf in
TS 24.368 [65].
RFU (see TS 31.101 [11])
The Override NAS signalling low priority tag and the Override Extended access barring tag shall be set to the same
value, e.g., if the UE is configured to override the NAS signalling low access priority indicator, then it has also to be
configured to override Extended access barring (see 3GPP TS 23.401 [69] subclause 4.3.17.4).
- Override Extended access barring
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
101
ETSI TS 131 102 V13.3.0 (2016-04)
Contents:
As described in TS 24.368 [65], used to determine whether the Extended access barring included in NAS
messages can be overriden.
Coding:
b8
b7
b6
b5
b4
b3
b2
b1
b1 value to be interpreted as defined for the
Override_ ExtendedAccessBarring leaf in
TS 24.368 [65].
RFU (see TS 31.101 [11])
The Override Extended access barring tag and the Override NAS signalling low priority tag shall be set to the same
value, e.g., if the UE is configured to override Extended access barring, then it has also to be configured to override
the NAS signalling low access priority indicator (see 3GPP TS 23.401 [69] subclause 4.3.17.4).
- Fast First Higher Priority PLMN Search
Contents:
Determine whether the UE can perform Fast First Higher Priority PLMN Search upon selecting a VPLMN as
specified in 3GPP TS 23.122 [31].
Coding:
b8
b7
b6
b5
b4
b3
b2
b1
b1 value to be interpreted as defined for the
FastFirstHigherPriorityPLMNSearch leaf in
TS 24.368 [65].
RFU (see TS 31.101 [11])
- E-UTRA Disabling Allowed for EMM cause #15
Contents:
Determine whether the UE is allowed to disable the E-UTRA capability when it receives the Extended EMM IE
with value cause "E-UTRAN not allowed" as specified in 3GPP TS 24.301 [51].
Coding:
b8
b7
b6
b5
b4
b3
b2
b1
b1 value to be interpreted as defined for the
EUTRADisablingAllowedforEMMcause15 leaf in
3GPP TS 24.368 [65]
RFU (see TS 31.101 [11])
-
SM_RetryWaitTime
Contents:
As described in TS 24.368 [65], provides a configured UE retry wait time value applicable when in HPLMN or
EHPLMN (see 3GPP TS 23.122 [31]) for controlling the UE session management retry behaviour when prior
session management request was rejected by the network with cause value #8, #27, #32, #33 as specified in
3GPP TS 24.008 [9] and 3GPP TS 24.301 [51].
Coding:
b8
b7
b6
b5
b4
b3
b2
b1
bits b1 to b8 to be interpreted as defined for the
SM_RetryWaitTime leaf in 3GPP TS 24.368 [65]
-
SM_RetryAtRATChange
Contents:
As described in TS 24.368 [65], indicates the UE's retry behaviour when in HPLMN or EHPLMN (see
3GPP TS 23.122 [31]) after inter-system change between S1 mode and A/Gb or Iu mode as specified in 3GPP
TS 24.008 [9] and 3GPP TS 24.301 [51].
Coding:
b8
b7
b6
b5
b4
b3
b2
b1
b1 value to be interpreted as defined for the
SM_RetryAtRATChange leaf in 3GPP TS 24.368 [65]
RFU (see TS 31.101 [11])
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
102
ETSI TS 131 102 V13.3.0 (2016-04)
If any of these NAS configuration parameters is neither included in EFNASCONFIG nor stored in the ME's non-volatile
memory, the default value as defined for the corresponding leaf in TS 24.368 [65] shall apply.
Unused bytes shall be set to 'FF'.
4.2.95
EFUICCIARI (UICC IARI)
If service n°95 is "available", this file shall be present.
As specified in TS 24.229 [63] a ME includes the list of IARIs for the IMS applications it intends to use when sending
an initial registration or when sending subsequent registrations to the IMS in the form of a SIP REGISTER request.
This EF contains a list of IARIs associated with active applications installed on the UICC that are included in the SIP
REGISTER request in accordance with the procedures of TS 24.229 [63].
NOTE:
If this file is present in both the USIM and the ISIM, the file in the ISIM is used. It is assumed that the
presence of this file in the USIM when an ISIM is present on the UICC is an incorrect configuration of
the UICC.
Identifier: '6FE7'
Record length: X bytes.
Access Conditions:
READ
UPDATE
ACTIVATE
DEACTIVATE
Bytes
1 to X
Structure: linear fixed
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
IARI TLV object
M/O
M
Length
X bytes
IARI TLV object:
Contents:
- The content and coding is defined below.
Coding of the IARI TLV objects
Length
1 byte
1 byte
Y bytes
-
Description
IARI TLV TAG
Length of IARI
IARI value
Value
'80'
Y
-
Status
M
M
M
Coding:
IMS Application Reference Identifier: shall be coded as specified in TS 24.229 [63].
Unused bytes shall be set to 'FF'.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
4.2.96
103
ETSI TS 131 102 V13.3.0 (2016-04)
EFPWS (Public Warning System)
If service n°97 is "available", this file shall be present. This EF contains the configuration parameters for PWS, as
defined in TS 22.268 [68].
Identifier: '6FEC'
File size: 1+Z bytes
Structure: transparent
Optional
Update activity: low
Access Conditions:
READ
UPDATE
ACTIVATE
DEACTIVATE
Bytes
1 to Z+1
ALW
ADM
ADM
ADM
Description
M/O
M
PWS configuration
Length
1+Z bytes
Contents:
Configuration for PWS
Coding:
First byte:
b8
b7
b6
b5
b4
b3
b2
b1
b1=0 process all PWS warning messages in HPLMN and
equivalent PLMNs
b1=1 ignore all PWS warning messages in HPLMN and
equivalent PLMNs
b2=0 process all PWS warning messages in VPLMNs
b2=1 ignore all PWS warning messages in VPLMNs
RFU (see TS 31.101 [11])
Successive bytes:
RFU (see TS 31.101 [11])
4.2.97
EFFDNURI (Fixed Dialling Numbers URI)
If service n° 2 and service n° 99 are "available", this file may be present.
This EF contains a list of FDN stored in URI address format. It may also contain an associated alpha-tagging.
Structure of EFFDNURI
Identifier: '6FED'
Structure: linear fixed
Record length: X+Y bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
X+1 to X+Y
-
Update activity: low
PIN
PIN2
ADM
ADM
Description
URI Address
Alpha Identifier
URI Address.
Content:
The URI Address associated to the referenced file Record number.
Coding:
Same as URI TLV data object in EFIMPU defined in TS 31.103 [64].
-
Optional
Alpha Identifier.
ETSI
M/O
M
O
Length
X bytes
Y bytes
3GPP TS 31.102 version 13.3.0 Release 13
104
ETSI TS 131 102 V13.3.0 (2016-04)
Contents:
-Alpha-tagging of the associated dialling number.
Coding:
this alpha-tagging shall use either:
- the SMS default 7-bit coded alphabet as defined in TS 23.038 [5] with bit 8 set to 0. The alpha identifier
shall be left justified. Unused bytes shall be set to 'FF'.
Or:
- one of the UCS2 coded options as defined in the annex of TS 31.101 [11].
If FDN is enabled, the ME shall only allow outgoing calls using destination addresses which are in EFFDNURI, in addition
to the EFFDN entries, following the same principle as defined in the Fixed Number Dialling description in TS 22.101
[24] applied to URI addresses.
The EFFDNURI shall be enforced:
-
If the dialling number introduced by the user is an URI
-
Or if the dialling number has been stored in the UE as a URI
NOTE:
4.2.98
The value of Y (the number of bytes in the alpha-identifier) may be different to the length denoted X in
EFFDN.
EFBDNURI (Barred Dialling Numbers URI)
If service n° 6 and service n° 99 are "available", this file may be present.
This EF contains a list of BDN stored in URI address format. It may also contain an associated alpha-tagging.
Structure of EFBDNURI
Identifier: '6FEE'
Structure: linear fixed
Record length: X+Y bytes
Update activity: low
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
X+1 to X+Y
-
Optional
PIN
PIN2
ADM
ADM
Description
URI Address
Alpha Identifier
M/O
M
O
Length
X bytes
Y bytes
URI Address.
Content:
The URI Address associated to the referenced file Record number.
Coding:
Same as URI TLV data object in EFIMPU defined in TS 31.103 [64].
-
Alpha Identifier.
Contents:
Alpha-tagging of the associated dialling number.
Coding:
this alpha-tagging shall use either:
- the SMS default 7-bit coded alphabet as defined in TS 23.038 [5] with bit 8 set to 0. The alpha identifier
shall be left justified. Unused bytes shall be set to 'FF'.
or:
- one of the UCS2 coded options as defined in the annex of TS 31.101 [11].
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
105
ETSI TS 131 102 V13.3.0 (2016-04)
If BDN is enabled, the ME shall only allow outgoing calls using destination addresses which are neither in EFBDNURI nor
in the EFBDN entries, following the same principle as defined in the Barring of Dialled Numbers described in TS 22.101
[24] applied to URI addresses.
The EFBDNURI shall be enforced:
-
If the dialling number introduced by the user is an URI
-
Or if the dialling number has been stored in the UE as a URI
NOTE:
4.2.99
The value of Y (the number of bytes in the alpha-identifier) may be different to the length denoted X in
EFBDN.
EFSDNURI (Service Dialling Numbers URI)
If service n° 4 and service n° 99 are "available", this file may be present.
This EF contains a list of SDN stored in URI address format. It may also contain an associated alpha-tagging.
Structure of EFSDNURI
Identifier: '6FEF'
Structure: linear fixed
Record length: X+Y bytes
Update activity: low
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
X+1 to X+Y
-
Optional
PIN
ADM
ADM
ADM
Description
URI Address
Alpha Identifier
M/O
M
O
Length
X bytes
Y bytes
URI Address.
Content:
The URI Address associated to the referenced file Record number.
Coding:
Same as URI TLV data object in EFIMPU defined in TS 31.103 [64].
-
Alpha Identifier.
Contents:
Alpha-tagging of the associated dialling number.
Coding:
this alpha-tagging shall use either:
- the SMS default 7-bit coded alphabet as defined in TS 23.038 [5] with bit 8 set to 0. The alpha identifier
shall be left justified. Unused bytes shall be set to 'FF'.
or:
- one of the UCS2 coded options as defined in the annex of TS 31.101 [11].
If SDN is enabled, the ME shall perform SDN procedure using destination addresses which are in EFSDNURI or in EFSDN
entries, following the same principle as defined in the Service Dialling Numbers description in TS 22.101 [24] applied
to URI addresses.
NOTE:
The value of Y (the number of bytes in the alpha-identifier) may be different to the length denoted X in
EFSDN.
4.2.100 EFIWL (IMEI(SV) White Lists)
The file EFIWL stores ranges of values of IMEI(SV) to which the USIM is authorized to be paired as defined in this
specification.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
106
ETSI TS 131 102 V13.3.0 (2016-04)
This file shall be present if USAT Application Pairing is supported as defined in this specification.
This file shall contain at least one IMEI(SV) range of values to which the USIM is authorized to be paired.
Identifier: '6FF0'
Record length: X+2 bytes (X>=16)
Access Conditions:
READ
UPDATE
ACTIVATE
DEACTIVATE
Bytes
1 to X+2
-
Structure: linear fixed
Optional
Update activity: low
ADM
ADM
ADM
ADM
Description
IMEI or IMEISV range TLV object
M/O
M
Length
X+2 bytes
IMEI(SV) range of values TLV object.
The content and coding is defined below, where IMEI and IMEISV are defined in 3GPP TS 23.003[25]:
Coding of the IMEI Range TLV objects
Length
1 byte
1 byte
X bytes
Description
Tag of Range of IMEI values: "80"
Length
IMEI range of values that the USIM is
authorized to be paired to (Detail 1)
Status
M
M
C
Coding of the IMEISV Range TLV objects
Length
1 byte
1 byte
X bytes
Description
Tag of Range of IMEISV values: "81"
Length
IMEISV range of values that the USIM is
authorized to be paired to (Detail 1)
Status
M
M
C
Detail 1:
• Following the Length of the TLV, the range is defined as follow: [lower value][higher value].
• The authorized values of IMEI or IMEISV in an authorized range of values include the lower and higher
values of the specified range.
• To define an authorized individual IMEI or IMEISV, the lower value and the higher value of a range shall
both be equal to the value of the authorized IMEI or IMEISV.
• For an IMEI, the Check Digit is not considered in the evaluation
• For an IMEISV, the TAC|SNR part and the SVN part may be evaluated separately
Coding:
•
•
IMEI and IMEISV coding is defined in 3GPP TS 23.003 [25] and 3GPP TS 24.008 [9]
Unused nibble (IMEI) is set to 'F'
Unused bytes shall be set to 'FF'.
UICC OTA mechanism is used to update the file EF IWL stored in the USIM. This mechanism provides dynamic
management of the pairing to change the allowed combinations of USIM and MTC ME(s) by adding or removing
authorized IMEI(SV) ranges in the file EF IWL.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
107
ETSI TS 131 102 V13.3.0 (2016-04)
4.2.101 EFIPS (IMEI(SV) Pairing Status)
The EFIPS file stores the status of USAT Application Pairing checking.
This file shall be present if USAT Application Pairing is supported as defined in this specification.
The status flag of pairing check (with value "OK" or "KO") stored in the file EFIPS can be read by any terminal hosting
the UICC. The information stored in the file EFIPS provides a mechanism to detect changes of association between a
USIM and a MTC ME. The information stored in the file EFIPS can be read locally by e.g. the maintenance person.
Structure of EFIPS
Identifier: '6FF1'
Record length: 4 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1-2
3
4
Structure: Cyclic
Optional
Update activity: high
ALWAYS
ADM
ADM
ADM
Description
Status of the last pairing procedure (detail 1)
Link to a record of EFIPD (detail 2)
Reserved for future use
M/O
O
O
-
Length
2 bytes
1 byte
1 byte
Due to the frequency of the pairing procedure, it is recommended that this file contain at least 100 records.
Detail 1:
These 2 bytes contain the status of the last pairing procedure as defined below:
- If the pairing is successful then:
1. Byte 1 is the character "O"
2. Byte 2 is the character "K"
- If the pairing is not successful then:
1. Byte 1 is the character "K"
2. Byte 2 is the character "O"
- The characters are coded using the SMS default 7-bit coded alphabet as defined in TS 23.038 [5] with bit 8 set to
0.
Detail 2:
This byte contains a link to a record of EFIPD file:
- Unsigned integer coded from '01' to 'FE'
4.2.102 EFIPD (IMEI(SV) of Pairing Device)
The EFIPD contains the IMEI(SV) as defined in TS 23.003[25] that was used in the USAT Application Pairing
procedure.
This file shall be present if USAT Application Pairing is supported as defined in this specification.
Identifier: '6FF2'
Record length: X+2 bytes (X>=8)
Access Conditions:
READ
UPDATE
ACTIVATE
DEACTIVATE
Bytes
1 to X+2
Structure: linear fixed
Optional
Update activity: high
ADM
ADM
ADM
ADM
Description
IMEI or IMEISV TLV object
ETSI
M/O
M
Length
X+2 bytes
3GPP TS 31.102 version 13.3.0 Release 13
-
108
ETSI TS 131 102 V13.3.0 (2016-04)
IMEI(SV) TLV object.
The content and coding is defined below, where IMEI and IMEISV are defined in 3GPP TS 23.003[25]:
Coding of the IMEI TLV object
Length
1 byte
1 byte
X bytes
Description
Tag for an IMEI: '80'
Length
IMEI value used in the pairing procedure
Status
M
M
C
Coding of the IMEISV TLV object
Length
1 byte
1 byte
X bytes
•
•
Description
Tag for an IMEISV: '81'
Length
IMEISV value used in the pairing procedure
Status
M
M
C
Coding:IMEI and IMEISV coding is defined in 3GPP TS 23.003 [25] and 3GPP TS 24.008 [9]
Unused nibble (IMEI) is set to 'F'
Unused bytes are set to 'FF'.
4.2.103 EFePDGId (Home ePDG Identifier)
If service n°106 and service n°107 are "available", this file shall be present.
This EF contains zero or more Home Evolved Packet Data Gateway (ePDG) Identifier data objects as defined in the
"Selection of the ePDG" UE procedure of 3GPP TS 24.302 [79].
Identifier: '6FF3'
File size: >X bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
X+1 to Y
…
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
Home ePDG identifier TLV data object
Home ePDG identifier TLV data object
M/O
O
O
Length
X bytes
Y-X bytes
Home ePDG Identifier TLV data object
Contents:
-
Address of Evolved Packet Data Gateway, in the format of a FQDN, an IPv4 address, or an IPv6 address.
Coding:
-
The tag value of this Home ePDG Identifier TLV data object shall be '80'. The format of the data object is as
follows:
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
109
ETSI TS 131 102 V13.3.0 (2016-04)
Field
Tag
Length
Address Type
Home ePDG Address
Address Type:
-
Length (bytes)
1
1
1
Address Length
Type of the ePDG address.
This field shall be set to the type of the ePDG address according to the following:
Value
'00'
'01'
'02'
All other values are
reserved
Address Type
FQDN
IPv4
IPv6
ePDG Address: Address of the Evolved Packet Data Gateway
Contents:
-
This field shall be set to the address of the ePDG.
Coding:
-
When the Address Type is set to '00', the corresponding ePDG FQDN Address shall be encoded to an octet
string according to UTF-8 encoding rules as specified in IETF RFC 3629 [48].
-
When the Address Type is set to '01', the corresponding ePDG IPv4 Address is in octet 5 to octet 8 of the
Home ePDG Identifier TLV data object. Bit 8 of octet 5 represents the most significant bit of the IP address
and bit 1 of octet 8 the least significant bit.
-
When the Address Type is set to '02', the corresponding ePDG IPv6 Address is in octet 5 to octet 20 of the
Home ePDG Identifier TLV data object. Bit 8 of octet 5 represents the most significant bit of the IP address
and bit 1 of octet 20 the least significant bit.
Unused bytes shall be set to 'FF'.
4.2.104 EFePDGSelection (ePDG Selection Information)
If service n°106 and service n°107 are "available", this file shall be present.
This EF contains Evolved Packet Data Gateway (ePDG) selection information for one or more PLMNs as defined in the
"Selection of the ePDG" UE procedure of 3GPP TS 24.302 [79].
Identifier: '6FF4'
File size: Z bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to Z
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
ePDG selection information TLV data object
ETSI
M/O
O
Length
Z bytes
3GPP TS 31.102 version 13.3.0 Release 13
110
ETSI TS 131 102 V13.3.0 (2016-04)
The file contains one ePDG selection information TLV data object. The ePDG selection information TLV data object
contains a list of PLMNs which are preferred for ePDG selection. The list of PLMNs may include the HPLMN. For
each PLMN, it is indicated:
• the preference order (priority) given to ePDG of a PLMN and
• whether selection of an ePDG in such PLMN should be based on Tracking/Location Area Identity FQDN or on
Operator Identifier FQDN,
as specified in the "Selection of the ePDG" UE procedure of 3GPP TS 24.302 [79].
ePDG selection information TLV data object:
Description
Value
M/O/C
ePDG Selection Information Tag
'80'
Length
5n
PLMN 1
-ePDG Priority
-ePDG FQDN format
'00' or '01'
…
PLMN n
-ePDG Priority
-ePDG FQDN format indicator
'00' or '01'
Note:
The length is coded according to ISO/IEC 8825-1 [35]
Length (bytes)
M
M
C
C
C
1
Note
3
2
1
C
C
C
3
2
1
PLMN:
Contents:
-
Mobile Country Code (MCC) followed by the Mobile Network Code (MNC).
Coding:
-
According to TS 24.008 [9].
-
A BCD value of 'D' in any of the MCC and/or MNC digits shall be used to indicate a "wild" value for that
corresponding MCC/MNC digit.
-
A value of 'DDDDDD' represents "any PLMN" value.
ePDG Priority:
Contents:
-
The PLMN Priority represents the preference order given to ePDGs of a PLMN.
Coding:
-
ePDG Priority value is coded as a 2-Byte integer.
ePDG FQDN format:
Contents:
-
Indicates whether the selection of an ePDG in this PLMN should be based on Tracking/Location Area
Identity FQDN or on Operator Identifier FQDN (see 3GPP TS 24.302 [79]).
Coding:
-
'00': Indicates that Operator Identifier FQDN format shall be used (see 3GPP TS 24.302 [79]).
-
'01': Indicates that location based FQDN format shall be used (see 3GPP TS 24.302 [79]).
-
Other values are RFU.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
111
ETSI TS 131 102 V13.3.0 (2016-04)
4.2.104 EFePDGIdEm (Emergency ePDG Identifier)
If service n°111 and service n°110 are "available", this file shall be present.
This EF contains zero or more Emergency Evolved Packet Data Gateway (ePDG) Identifier data objects.
Identifier: '6FF5'
File size: >X bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
X+1 to Y
…
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
Emergency ePDG identifier TLV data object
Emergency ePDG identifier TLV data object
M/O
O
O
Length
X bytes
Y-X bytes
For coding, see EFePDGId
4.2.105 EFePDGSelectionEm (ePDG Selection Information for Emergency
Services)
If service n°111 and service n°110 are "available", this file shall be present.
This EF contains Evolved Packet Data Gateway (ePDG) selection information for Emergency Services.
Identifier: '6FF6'
File size: Z bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to Z
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
ePDG selection information for Emergency
Services TLV data object
M/O
O
Length
Z bytes
For coding, see EFePDGSelection
4.3
DFs at the USIM ADF (Application DF) Level
DFs may be present as child directories of USIM ADF. The following DFs are defined:
DFPHONEBOOK
'5F3A' (see Note 2).
DFGSM-ACCESS
'5F3B'.
DFMexE
'5F3C'.
DFWLAN
'5F40'.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
DFHNB
'5F50'.
DFSoLSA
'5F70'.
DFBCAST
'5F80' (see Note 1).
DFProSe
'5F90'.
DFACDC
'5FA0'
112
ETSI TS 131 102 V13.3.0 (2016-04)
Note 1: The DF identifier '5F80' is reserved for OMA BCAST Smart Card Profile [49]
Note 2: DF for application specific phonebook. This DF has the same structure as the DFPHONEBOOK under
DFTELECOM.
4.4
Contents of DFs at the USIM ADF (Application DF) level
4.4.1
Contents of files at the DF SoLSA level
This only applies if the Support of Localised Service Areas is supported, as indicated by Service Number 23 in the
USIM Service Table and specified in TS 23.073 [23] .
The Efs contain information about the users subscribed local service areas.
4.4.1.1
EFSAI (SoLSA Access Indicator)
This EF contains the 'LSA only access indicator'. This EF shall always be allocated if DFSoLSA is present.
If the indicator is set, the network will prevent terminated and/or originated calls when the MS is camped in cells that
are not included in the list of allowed LSAs in EFSLL. Emergency calls are, however, always allowed.
The EF also contains a text string which may be displayed when the MS is out of the served area(s).
Identifier: '4F30'
File size: X + 1 bytes
Structure: transparent
Optional
Update activity: low
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2 to X+1
-
PIN
ADM
ADM
ADM
Description
LSA only access indicator
LSA only access indication text
M/O
M
M
Length
1 byte
X bytes
LSA only access indicator
Contents: indicates whether the MS is restricted to use LSA cells only or not.
Coding:
b8
b7
b6
b5
b4
b3
b2
b1
b1=0: LSA only access not activated
b1=1: LSA only access activated
RFU
-
LSA only access indication text
Contents: text to be displayed by the ME when it's out of LSA area.
Coding: the string shall use either
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
113
ETSI TS 131 102 V13.3.0 (2016-04)
-
the SMS default 7-bit coded alphabet as defined in TS 23.038 [5] with bit 8 set to 0. The alpha identifier
shall be left justified. Unused bytes shall be set to 'FF'; or
-
one of the UCS2 coded options as defined in the annex of TS 31.101 [11].
4.4.1.2
EFSLL (SoLSA LSA List)
This EF contains information describing the LSAs that the user is subscribed to. This EF shall always be allocated if
DFSoLSA is present.
Each LSA is described by one record that is linked to a LSA Descriptor file. Each record contains information of the
PLMN, priority of the LSA, information about the subscription and may also contain a text string and/or an icon that
identifies the LSA to the user. The text string can be edited by the user.
Identifier: '4F31'
Record length: X + 10 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
X+1
X+2
X+3
X+4
X+5 to X+7
X+8 to X+9
X+10
-
Structure: linear fixed
Optional
Update activity: low
PIN
PIN
ADM
ADM
Description
LSA name
Configuration parameters
RFU
Icon Identifier
Priority
PLMN code
LSA Descriptor File Identifier
LSA Descriptor Record Identifier
M/O
O
M
M
M
M
M
M
M
Length
X bytes
1 byte
1 byte
1 byte
1 byte
3 bytes
2 byte
1 byte
LSA name
Contents: LSA name string to be displayed when the ME is camped in the corresponding area, dependant on the
contents of the LSA indication for idle mode field.
Coding: the string shall use either
-
-
the SMS default 7-bit coded alphabet as defined in TS 23.038 [5] with bit 8 set to 0. The alpha identifier
shall be left justified. Unused bytes shall be set to 'FF'; or
-
one of theUCS2 code options defined in the annex of TS 31.101 [11].
Configuration parameters
Contents: Icon qualifier, control of idle mode support and control of LSA indication for idle mode.
Coding:
b8
b7
b6
b5
b4
b3
b2
b1
Icon qualifier
Idle mode support
LSA indication for idle mode
RFU
Icon qualifier:
Contents: The icon qualifier indicates to the ME how the icon is to be used.
B2, b1: 00: icon is not to be used and may not be present
01: icon is self-explanatory, i.e. if displayed, it replaces the LSA name
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
114
ETSI TS 131 102 V13.3.0 (2016-04)
10: icon is not self-explanatory, i.e. if displayed, it shall be displayed together with the LSA name
11: RFU
Idle mode support:
Contents: The idle mode support is used to indicate whether the ME shall favour camping on the LSA cells in
idle mode.
B3 = 0:
b3 = 1:
Idle mode support disabled
Idle mode support enabled
LSA indication for idle mode:
Contents: The LSA indication for idle mode is used to indicate whether or not the ME shall display the LSA
name when the ME is camped on a cell within the LSA.
B4 = 0:
b4 = 1:
LSA indication for idle mode disabled
LSA indication for idle mode enabled
Bits b5 to b8 are RFU (see subclause 9.3).
-
Icon Identifier
Contents: The icon identifier addresses a record in EFIMG.
Coding: binary.
-
Priority
Contents: Priority of the LSA which gives the ME the preference of this LSA relative to the other LSAs.
Coding:
b8
b7
b6
b5
b4
b3
b2
b1
Priority
RFU
'0' is lowest priority, 'F' is highest.
-
PLMN code
Contents: MCC + MNC for the LSA.
Coding: according to TS 24.008 [9] and EFLOCI.
-
LSA Descriptor File Identifier:
Contents: these bytes identify the EF which contains the LSA Descriptors forming the LSA.
Coding: byte X+8: high byte of the LSA Descriptor file;
byte X+9: low byte of the LSA Descriptor file.
-
LSA Descriptor Record Identifier:
Contents: this byte identifies the number of the first record in the LSA Descriptor file forming the LSA.
Coding: binary.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
4.4.1.3
115
ETSI TS 131 102 V13.3.0 (2016-04)
LSA Descriptor files
Residing under DFSoLSA, there may be several LSA Descriptor files. These Efs contains one or more records again
containing LSA Descriptors forming the LSAs. LSAs can be described in four different ways. As a list of LSA Ids, as a
list of LAC + Cis, as a list of Cis or as a list of LACs. As the basic elements (LSA ID, LAC + CI, CI and LAC) of the
four types of lists are of different length, they can not be mixed within one record. Different records may contain
different kinds of lists within the Efs. Examples of codings of LSA Descriptor files can be found in annex F.
Identifier: '4FXX'
Record length: n*X+2 bytes
Structure: linear fixed
Optional
Update activity: low
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2 to X+1
X+2 to 2X+1
:
(n-1)*X+2 to
n*X+1
n*X+2
-
PIN
ADM
ADM
ADM
Description
LSA descriptor type and number
st
1 LSA Descriptor
nd
2 LSA Descriptor
:
th
n LSA Descriptor
Record Identifier
M/O
M
M
M
:
M
Length
1 byte
X bytes
X bytes
:
X bytes
M
1 byte
LSA descriptor type and number:
Contents: The LSA descriptor type gives the format of the LSA descriptor and the number of valid LSA
Descriptors within the record.
Coding:
b8
b7
b6
b5
b4
b3
b2
b1
LSA descriptor type
Number of LSA Descriptors
LSA descriptor type:
Contents: Gives the format of the LSA Descriptors.
B2, b1:
00: LSA ID.
01: LAC + CI
10: CI
11: LAC
Number of LSA Descriptors:
Contents: Gives the number of valid LSA Descriptors in the record.
Coding: binary, with b8 as MSB and b3 as LSB leaving room for 64 LSA Descriptors per record.
-
LSA Descriptor
Contents: Dependant of the coding indicated in the LSA descriptor type:
-
in case of LSA ID the field length 'X' is 3 bytes;
-
in case of LAC + CI the field length 'X' is 4 bytes;
-
in case of CI the field length 'X' is 2 bytes;
-
in case of LAC the field length 'X' is 2 bytes.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
116
ETSI TS 131 102 V13.3.0 (2016-04)
Coding: according to TS 24.008 [9].
-
Record Identifier:
Contents: This byte identifies the number of the next record containing the LSA Descriptors forming the LSA.
Coding: record number of next record. 'FF' identifies the end of the chain.
This file utilises the concept of chaining as for EFEXT1.
The identifier '4FXX' shall be different from one LSA Descriptor file to the other and different from the identifiers of
EFSAI and EFSLL. For the range of 'XX', see TS 31.101 [11].
4.4.2
Contents of files at the DF PHONEBOOK level
The Efs in the DFPHONEBOOK level contain phone book related features as required in TS 21.111 [1].
The UICC may contain a global phonebook, or application specific phonebooks, or both in parallel. When both
phonebook types co-exist, they are independent and no data is shared. In this case, when the terminal supports
application specific phonebooks, it shall be possible for the user to select which phonebook the user would like to
access. To achieve this, the terminal shall support the global and, conditionally, the application specific phonebooks,
also known as local phonebook. The support of local phone book is:
a) optional for terminals that support alternative phonebook applications; and
NOTE 1: Such terminals could be of type "Smartphone" as described in GSMA: "IMEI Allocation and Approval
Process" [84].
b) mandatory for terminals that do not support alternative phonebook applications.
NOTE 2: Such terminals could be of type "Feature Phone" as described in GSMA: "IMEI Allocation and Approval
Process" [84].
It is recommended that the terminal searches for the global phonebook located under DFTELECOM as its presence is not
indicated anywhere in the USIM application.
The global phonebook is located in DFPHONEBOOK under DFTELECOM.. Each specific USIM application phonebook is
located in DFPHONEBOOK of its respective Application ADFUSIM. The organisation of files in DFPHONEBOOK under ADFUSIM
and under DF TELECOM follows the same rules. Yet DFPHONEBOOK under ADFUSIM may contain a different set of files than
DFPHONEBOOK under DFTELECOM. All phonebook related Efs are located under their respective DFPHONEBOOK. USIM
specific phonebooks are dedicated to application specific entries. Each application specific phonebook is protected by
the application PIN.
EFADN and EFPBR shall always be present if the DFPhonebook is present. If any phonebook file other than EFADN or
EFEXT1, is used, then EFPBC shall be present.
If a GSM application resides on the UICC, the Efs ADN and EXT1 from one DFPHONEBOOK (defined at GSM application
installation) are mapped to DFTELECOM. Their file Ids are specified in TS 51.011 [18], i.e. EFADN = '6F3A' and EFEXT1 =
'6F4A', respectively.
If the UICC is inserted into a terminal accessing the ADN and EXT1 files under DFTELECOM; and a record in these files
has been updated, a flag in the corresponding entry control information in the EFPBC is set from 0 to 1 by the UICC. If
the UICC is later inserted into a terminal that supports the global and/or application specific phonebook, the terminal
shall check the flag in EFPBC and if this flag is set, shall update the EFCC, and then reset the flag. A flag set in EFPBC
results in a full synchronisation of the phonebook between an external entity and the UICC (if synchronisation is
requested).
The EF structure related to the public phonebook is located under DFPHONEBOOK in DFTELECOM. A USIM specific
phonebook may exist for application specific entries. The application specific phonebook is protected by the application
PIN. The organisation of files in the application specific phonebook follows the same rules as the one specified for the
public phone book under DFTELECOM. The application specific phonebook may contain a different set of files than the
one in the public area under DFTELECOM.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
4.4.2.1
117
ETSI TS 131 102 V13.3.0 (2016-04)
EFPBR (Phone Book Reference file)
This file describes the structure of the phonebook. All Efs representing the phonebook are specified here (with the
exception of EFPSC, EFPUID and EFCC), together with their file identifiers (FID) and their short file identifiers (SFI), if
applicable.
Certain kinds of Efs can occur more than once in the phonebook, e.g. there may be two entities of Abbreviated Dialling
Numbers, EFADN and EFADN1. For these kinds of Efs, no fixed FID values are specified. Instead, the value '4FXX'
indicates that the value is to be assigned by the card issuer. These assigned values are then indicated in the associated
TLV object in EFPBR.
The SFI value assigned to an EF which is indicated in EFPBR shall correspond to the SFI indicated in the TLV object in
EFPBR.
The reference file is a file that contains information how the information in the different files is to be combined together
to form a phone book entry. The reference file contains records. Each record specifies the structure of up to 254 entries
in the phone book. Each phone book entry consists of data stored in files indicated in the reference file record. The entry
structure shall be the same over all the records in the EF PBR. If more than 254 entries are to be stored, a second record
is needed in the reference file. The structure of a phone book entry is defined by different TLV objects that are stored in
a reference file record. The reference file record structure describes the way a record in a file that is part of the
phonebook is used to create a complete entry. Three different types of file linking exist.
Type 1 files:
Files that contain as many records as the reference/master file (EFADN, EFADN1) and are linked on
record number bases (Rec1 -> Rec1). The master file record number is the reference.
Type 2 files:
Files that contain less entries than the master file and are linked via pointers in the index
administration file (EFIAP).
Type 3 files:
Files that are linked by a record identifier within a record.
Table 4.1: Phone Book Reference file Constructed Tags
Tag Value
'A8'
'A9'
'AA'
Constructed TAG Description
Indicating files where the amount of records equal to
master EF, type 1
Indicating files that are linked using the index
administration file, type 2. Order of pointer appearance
in index administration EF is the same as the order of
file Ids following this tag
Indicating files that are linked using a record identifier,
type 3. (The file pointed to is defined by the TLV
object.)
The first file ID in the first record of EFPBR indicated using constructed Tag 'A8' is called the master EF. Access
conditions for all other files in the Phonebook structure using Tags 'A8', 'A9' or 'AA' is set to the same as for the master
EF unless otherwise specified in the present document.
File Ids indicated using constructed Tag 'A8' is a type 1 file and contains the same number of records as the first file that
is indicated in the data part of this TLV object. All files following this Tag are mapped one to one using the record
numbers/Ids of the first file indicated in this TLV object.
File Ids indicated using constructed Tag 'A9' are mapped to the master EF (the file ID indicated as the first data object
in the TLV object using Tag 'A8') using the pointers in the index administration file. The order of the pointers in the
index administration file is the same as the order of the file Ids presented after Tag 'A9'. If this Tag is not present in the
reference file record the index administration file is not present in the structure. In case the index administration file is
not present in the structure it is not indicated in the data following tag 'A8'.
File Ids indicated using constructed Tag 'AA' indicate files that are part of the reference structure but they are addressed
using record identifiers within a record in one or more of the files that are part of the reference structure. The length of
the tag indicates whether the file to be addressed resides in the same directory or if a path to the file is provided in the
TLV object.
Type 2 and type 3 files contain records that may be shared between several phonebook entries (except when otherwise
indicated). The terminal shall ensure that a shared record is emptied when the last phonebook entry referencing it is
modified in such a way that it doesn't reference the record anymore.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
NOTE:
118
ETSI TS 131 102 V13.3.0 (2016-04)
in the current version of the specification, only type 3 files contain records that may be shared.
Each constructed Tag contains a list of primitive Tags indicating the order and the kind of data (e.g. ADN, IAP,…) of
the reference structure.
The primitive tag identifies clearly the type of data, its value field indicates the file identifier and, if applicable, the SFI
value of the specified EF. That is, the length value of a primitive tag indicates if an SFI value is available for the EF or
not:
-
Length = '02' Value: 'FID (2 bytes)'
-
Length = '03' Value: 'FID (2 bytes)', 'SFI (1 byte)'
Table 4.2: Tag definitions for the phone book kind of file
Tag Value
'C0'
'C1'
'C2'
'C3'
'C4'
'C5'
'C6'
'C7'
'C8'
'C9'
'CA'
'CB'
'CC'
TAG Description
EFADN data object
EFIAP data object
EFEXT1 data object
EFSNE data object
EFANR data object
EFPBC data object
EFGRP data object
EFAAS data object
EFGAS data object
EFUID data object
EFEMAIL data object
EFCCP1 data object
EFPURI data object
Table 4.3 (below) lists the allowed types for each kind of file:
Table 4.3: Presence of files as type
File name
EFAAS
EFADN
EFANR
EFEMAIL
EFEXT1
EFGAS
EFGRP
EFIAP
EFPBC
EFSNE
EFUID
EFCCP1
EFPURI
Type 1
Type 2
X
X
X
X
X
Type 3
X
X
X
X
X
X
X
X
X
X
X
X
Phone Book Reference file EFPBR structure
Identifier: '4F30'
Structure: linear fixed
Conditional
(see Note)
Update activity: low
Record Length: X bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
PIN
ADM
ADM
ADM
Bytes
1 to X
NOTE:
Description
M/O
TLV object(s) for indicating Efs that are part of
M
the phone book structure
This file is mandatory if and only if DFPhonebook is present.
ETSI
Length
X bytes
3GPP TS 31.102 version 13.3.0 Release 13
119
ETSI TS 131 102 V13.3.0 (2016-04)
At the end of each record, unused bytes, if any, shall be filled with 'FF'.
4.4.2.2
EFIAP (Index Administration Phone book)
This file is present if Tag 'A9' is indicated in the reference file.
The EF contains pointers to the different records in the files that are part of the phone book. The index administration
file record number/ID is mapped one to one with the corresponding EFADN (shall be record to record). The index
administration file contains the same amount of records as EFADN. The order of the pointers in an EFIAP shall be the
same as the order of file Ids that appear in the TLV object indicated by Tag 'A9' in the reference file record. The amount
of bytes in a record is equal to the number of files indicated the EFPBR following tag 'A9'.
The value 'FF' is an invalid record number/ID and is used in any location in to indicate that no corresponding record in
the indicated file is available.
The content of EFIAP is set to 'FF' at the personalisation stage.
Index administration file EFIAP structure
Identifier: '4FXX'
Structure: linear fixed
SFI: 'YY'
Record Length: X bytes, (X ≥ 1)
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Conditional
(see Note)
Update activity: low
PIN
PIN
ADM
ADM
Bytes
1
2
X
NOTE 1:
NOTE 2:
4.4.2.3
Description
M/O
Length
Record number of the first object indicated after
M
1 byte
Tag 'A9'
Record number of the second object indicated
C
1 byte
after Tag 'A9'
th
Record number of the x object indicated after
C
1 byte
Tag 'A9'
This file is mandatory if and only if type 2 files are present.
th
th
x -field marked with "C" is mandatory if x -object indicated following tag "A9" is
present in EFPBR
EFADN (Abbreviated dialling numbers)
This EF contains Abbreviated Dialling Numbers (ADN) and/or Supplementary Service Control strings (SSC). In
addition it contains identifiers of associated network/bearer capabilities and identifiers of extension records. It may also
contain an associated alpha-tagging.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
120
Identifier: '4FXX'
ETSI TS 131 102 V13.3.0 (2016-04)
Structure: linear fixed
SFI: 'YY'
Record length: X+14 bytes
Conditional
(see Note)
Update activity: low
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
PIN
PIN
ADM
ADM
Bytes
Description
M/O
1 to X
Alpha Identifier
O
X+1
Length of BCD number/SSC contents
M
X+2
TON and NPI
M
X+3 to X+12
Dialling Number/SSC String
M
X+13
Capability/Configuration1 Record Identifier
M
X+14
Extension1 Record Identifier
M
NOTE:
This file is mandatory if and only if DFPHONEBOOK is present.
Length
X bytes
1 byte
1 byte
10 bytes
1 byte
1 byte
- Alpha Identifier.
Contents:
- Alpha-tagging of the associated dialling number.
Coding:
- this alpha-tagging shall use either:
- the SMS default 7-bit coded alphabet as defined in TS 23.038 [5] with bit 8 set to 0. The alpha identifier
shall be left justified. Unused bytes shall be set to 'FF'.
Or:
- one of the UCS2 coded options as defined in the annex of TS 31.101 [11].
NOTE 1: The value of X may be from zero to 241. Using the command GET RESPONSE the ME can determine
the value of X.
- Length of BCD number/SSC contents.
Contents:
- this byte gives the number of bytes of the following two data items containing actual BCD number/SSC information.
This means that the maximum value is 11, even when the actual ADN/SSC information length is greater than 11. When
an ADN/SSC has extension, it is indicated by the extension1 identifier being unequal to 'FF'. The remainder is stored in
the EFEXT1 with the remaining length of the additional data being coded in the appropriate additional record itself (see
clause 4.4.2.4).
Coding:
- according to TS 24.008 [9].
- TON and NPI.
Contents:
- Type of number (TON) and numbering plan identification (NPI).
Coding:
- according to TS 24.008 [9]. If the Dialling Number/SSC String does not contain a dialling number, e.g. a control
string deactivating a service, the TON/NPI byte shall be set to 'FF' by the ME (see note 2).
NOTE 2: If a dialling number is absent, no TON/NPI byte is transmitted over the radio interface (see
TS 24.008 [9]). Accordingly, the ME should not interpret the value 'FF' and not send it over the radio
interface.
B8
b7
b6
b5
b4
b3
b2
b1
NPI
TON
1
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
121
ETSI TS 131 102 V13.3.0 (2016-04)
- Dialling Number/SSC String
Contents:
- up to 20 digits of the telephone number and/or SSC information.
Coding:
- according to TS 24.008 [9], TS 22.030 [4] and the extended BCD-coding (see table 4.4). If the telephone number or
SSC is longer than 20 digits, the first 20 digits are stored in this data item and the remainder is stored in an associated
record in the EFEXT1. The record is identified by the Extension1 Record Identifier. If ADN/SSC require less than
20 digits, excess nibbles at the end of the data item shall be set to 'F'. Where individual dialled numbers, in one or more
records, of less than 20 digits share a common appended digit string the first digits are stored in this data item and the
common digits stored in an associated record in the EFEXT1. The record is identified by the Extension 1 Record
Identifier. Excess nibbles at the end of the data item shall be set to 'F'.
Byte X+3
B8
b7
B6
b5
b4
b3
b2
b1
LSB
:
:
MSB
LSB
:
:
MSB
of Digit 1
LSB
:
:
MSB
LSB
:
:
MSB
of Digit 3
of Digit 1
of Digit 2
of Digit 2
Byte X+4:
B8
b7
B6
b5
b4
b3
b2
b1
of Digit 3
of Digit 4
of Digit 4
etc.
- Capability/Configuration1 Record Identifier.
Contents:
- capability/configuration identification byte. This byte identifies the number of a record in the EFCCP1 containing
associated capability/configuration parameters required for the call. The use of this byte is optional. If it is not used it
shall be set to 'FF'.
Coding:
- binary.
- Extension1 Record Identifier.
Contents:
- extension1 record identification byte. This byte identifies the number of a record in the EFEXT1 containing an
associated called party subaddress or additional data. The use of this byte is optional. If it is not used it shall be set to
'FF'.
- if the ADN/SSC requires both additional data and called party subaddress, this byte identifies the additional record.
A chaining mechanism inside EFEXT1 identifies the record of the appropriate called party subaddress (see clause 4.4.2.4).
Coding:
- binary.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
122
ETSI TS 131 102 V13.3.0 (2016-04)
NOTE 3: EFADN in the public phone book under DFTELECOM may be used by USIM, GSM and also other
applications in a multi-application card. If the non-GSM application does not recognise the use of Type of
Number (TON) and Number Plan Identification (NPI), then the information relating to the national
dialling plan shall be held within the data item dialling number/SSC and the TON and NPI fields set to
UNKNOWN. This format would be acceptable for 3G operation and also for the non-GSM application
where the TON and NPI fields shall be ignored.
EXAMPLE:
SIM storage of an International Number using E.164 [22] numbering plan.
TON
NPI
Digit field.
USIM application
001
0001
abc...
Other application compatible with 3G
000
0000
xxx...abc...
where "abc..." denotes the subscriber number digits (including its country code), and "xxx..."
denotes escape digits or a national prefix replacing TON and NPI.
NOTE 4: When the ME acts upon the EFADN with a SEARCH RECORD command in order to identify a character
string in the alpha-identifier, it is the responsibility of the ME to ensure that the number of characters used
as SEARCH RECORD parameters are less than or equal to the value of X if the MMI allows the user to
offer a greater number.
Table 4.4: Extended BCD coding
BCD Value
'0'
:
'9'
'A'
'B'
'C'
'D'
'E'
'F'
Character/Meaning
"0"
:
"9"
"*"
"#"
DTMF Control digit separator (see TS 22.101 [24]).
"Wild" value. This will cause the MMI to prompt the user for a single digit (see TS 22.101 [24]).
RFU.
Endmark e.g. in case of an odd number of digits.
BCD values 'C', 'D' and 'E' are never sent across the radio interface.
NOTE 5: The interpretation of values 'D', 'E' and 'F' as DTMF digits is for further study.
NOTE 6: A second or subsequent 'C' BCD value will be interpreted as a 3 second PAUSE (see TS 22.101 [24]).
4.4.2.4
EFEXT1 (Extension1)
This EF contains extension data of an ADN/SSC.
Extension data is caused by:
-
an ADN/SSC which is greater than the 20 digit capacity of the ADN/SSC Elementary File or where common
digits are required to follow an ADN/SSC string of less than 20 digits. The remainder is stored in this EF as a
record, which is identified by a specified identification byte inside the ADN/SSC Elementary File. The EXT1
record in this case is specified as additional data;
-
an associated called party subaddress. The EXT1 record in this case is specified as subaddress data.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
123
Identifier: '4FXX'
SFI: 'YY'
Record length: 13 bytes
Structure: linear fixed
Optional
Update activity: low
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2 to 12
13
ETSI TS 131 102 V13.3.0 (2016-04)
PIN
PIN
ADM
ADM
Description
Record type
Extension data
Identifier
M/O
M
M
M
Length
1 byte
11 bytes
1 byte
- Record type.
Contents:
- type of the record.
Coding:
B8
b7
b6
b5
b4
b3
b2
b1
Called Party Subaddress
Additional data
RFU
-
b3 to b8 are reserved and set to 0;
-
a bit set to 1 identifies the type of record;
-
only one type can be set;
-
'00' indicates the type "unknown" or "free".
The following example of coding means that the type of extension data is "additional data":
B8
b7
b6
b5
b4
b3
b2
b1
0
0
0
0
0
0
1
0
- Extension data.
Contents:
additional data or Called Party Subaddress depending on record type.
Coding:
Case 1, Extension1 record is additional data:
- The first byte of the extension data gives the number of bytes of the remainder of ADN/SSC. The coding
of remaining bytes is BCD, according to the coding of ADN/SSC. Unused nibbles at the end shall be set
to 'F'. It is possible if the number of additional digits exceeds the capacity of the additional record to chain
another record inside the EXT1 Elementary File by the identifier in byte 13. In this case byte 2 (first byte
of the extension data) of all records for additional data within the same chain indicates the number of
bytes ('01' to '0A') for ADN/SSC (respectively MSISDN, LND) within the same record unequal to 'FF'.
Case 2, Extension1 record is Called Party Subaddress:
- The subaddress data contains information as defined for this purpose in TS 24.008 [9]. All information
defined in TS 24.008, except the information element identifier, shall be stored in the USIM. The length
of this subaddress data can be up to 22 bytes. In those cases where two extension records are needed,
these records are chained by the identifier field. The extension record containing the first part of the
called party subaddress points to the record which contains the second part of the subaddress.
- Identifier.
Contents:
identifier of the next extension record to enable storage of information longer than 11 bytes.
Coding:
record number of next record. 'FF' identifies the end of the chain.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
-
124
ETSI TS 131 102 V13.3.0 (2016-04)
Example of a chain of extension records being associated to an ADN/SSC. The extension1 record identifier
(Byte 14+X) of EFADN is set to 3.
EF EXT1
Byte: 1
2
3
4
5
6
Record
Type
7
8
9
10
11
12
Extension data
13
Identifier
Record 1
01
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
FF
Record 2
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
Record 3
02
0A
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
04
Record 4
02
04
xx
xx
xx
xx
FF
FF
FF
FF
FF
FF
06
Record 5
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
Record 6
01
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
01
•
•
•
In this example, ADN/SSC is associated to additional data (records 3 and 4) which represent the last 27 or 28 digits of
the whole ADN/SSC (the first 20 digits are stored in EFADN) and a called party subaddress whose length is more than 11
bytes (records 6 and 1).
4.4.2.5
EFPBC (Phone Book Control)
This EF contains control information related to each entry in the phone book. This EF contains as many records as the
EFADN associated with it (shall be record to record). Each record in EFPBC points to a record in its EFADN. This file
indicates the control information and the hidden information of each phone book entry.
The content of EFPBC is linked to the associated EFADN record by means of the ADN record number/ID (there is a one to
one mapping of record number/identifiers between EFPBC and EFADN).
Structure of control file EFPBC
Identifier: '4FXX'
Structure: linear fixed
SFI: 'YY'
Record length: 2 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Conditional
(see Note)
Update activity: low
PIN
PIN
ADM
ADM
Bytes
Description
M/O
1
Entry Control Information
M
2
Hidden Information
M
NOTE:
This file is mandatory if one or both of the following is true:
- hidden entries are supported
- a GSM SIM application is supported in the UICC.
Length
1 byte
1 byte
- Entry Control Information.
Contents:
- provides some characteristics about the phone book entry e.g. modification by a terminal accessing the ADN and
EXT1 files under DFTELECOM (see clause 4.4.2).
Coding:
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
b8
B7
b6
B5
b4
B3
125
b2
ETSI TS 131 102 V13.3.0 (2016-04)
B1
Modified phonebook entry '1', no change '0'
RFU (see TS 31.101)
- Hidden Information.
Contents:
indicates to which USIM application of the UICC this phone book entry belongs, so that the corresponding secret code
can be verified to display the phone book entry. If the secret code is not verified, then the phone book entry is hidden.
Coding:
'00' – the phone book entry is not hidden;
'xx' – the phone book entry is hidden. 'xx' is the record number in EFDIR of the associated USIM application.
4.4.2.6
EFGRP (Grouping file)
This EF contains the grouping information for each phone book entry. This file contains as many records as the
associated EFADN. Each record contains a list of group identifiers, where each identifier can reference a group to which
the entry belongs.
Structure of grouping file EFGRP
Identifier: '4FXX'
Structure: linear fixed
SFI: 'YY'
Record Length: X bytes (1 ≤ X ≤10)
Access Conditions:
READ
PIN
UPDATE
PIN
DEACTIVATE
ADM
ACTIVATE
ADM
Bytes
1
2
X
NOTE:
-
Conditional
(see Note)
Update activity: low
Description
Group Name Identifier 1
Group Name Identifier 2
Group Name Identifier X
M/O
M
O
O
Length
1 byte
1 byte
1 byte
This file is mandatory if and only if EFGAS is present.
Group Name Identifier x.
Content:
- indicates if the associated entry is part of a group, in that case it contains the record number of the group name in
EFGAS.
- One entry can be assigned to a maximum of 10 groups.
Coding:
- '00' – no group indicated;
'XX' – record number in EFGAS containing the alpha string naming the group of which the phone book entry is a
member.
4.4.2.7
EFAAS (Additional number Alpha String)
This file contains the alpha strings that are associated with the user defined naming tags for additional numbers
referenced in EFANR.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
126
ETSI TS 131 102 V13.3.0 (2016-04)
Structure of EFAAS
Identifier: '4FXX'
SFI: Optional
Record length: X bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
-
Structure: linear fixed
Optional
Update activity: low
PIN
PIN
ADM
ADM
Description
M/O
M
Alpha text string
Length
X bytes
Alpha text string.
Content:
- user defined text for additional number.
Coding:
- same as the alpha identifier in EFADN.
4.4.2.8
EFGAS (Grouping information Alpha String)
This file contains the alpha strings that are associated with the group name referenced in EFGRP.
Structure of EFGAS
Identifier: '4FXX'
Structure: linear fixed
SFI: Optional
Record length: X bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
NOTE:
-
Conditional
(see Note)
Update activity: low
PIN
PIN
ADM
ADM
Description
Alpha text string
M/O
M
Length
X bytes
This file is mandatory if and only if EFGRP is present.
Alpha text string
Content:
- group names.
Coding:
- same as the alpha identifier in EFADN.
4.4.2.9
EFANR (Additional Number)
Several phone numbers and/or Supplementary Service Control strings (SSC) can be attached to one EFADN record, using
one or several EFANR. The amount of additional number entries may be less than or equal to the amount of records in
EFADN. The EF structure is linear fixed. Each record contains an additional phone number or Supplementary Service
Control strings (SSC). This record cannot be shared between several phonebook entries. The first byte indicates whether
the record is free or the type of additional number referring to the record number in EFAAS, containing the text to be
displayed. The following part indicates the additional number and the reference to the associated record in the EFADN
file. In addition it contains identifiers of associated network/bearer capabilities and identifiers of extension records.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
127
ETSI TS 131 102 V13.3.0 (2016-04)
Structure of EFANR
Identifier: '4FXX'
SFI: 'YY'
Record length: 15 or 17 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Structure: linear fixed
Optional
Update activity: low
PIN
PIN
ADM
ADM
Bytes
Description
M/O
Length
1
Additional Number Record identifier
M
1 byte
2
Length of BCD number/SSC contents
M
1 byte
3
TON and NPI
M
1 byte
4 to 13
Additional number/SSC String
M
10 bytes
14
Capability/Configuration1 Record Identifier
M
1 byte
15
Extension1 Record Identifier
M
1 byte
16
ADN file SFI
C
1 byte
17
ADN file Record Identifier
C
1 byte
NOTE:
The fields marked C above are mandatory if and only if the file is not type 1 (as
specified in EFPBR)
-
Additional Number Record Identifier
Content:
- describes the type of the additional number defined in the file EFAAS.
Coding:
- '00' – no additional number description;
'xx' – record number in EFAAS describing the type of number (e.g. "FAX");
'FF' – free record.
-
Length of BCD number/SSC contents
Contents:
- this byte gives the number of bytes of the following two data items containing actual BCD number/SSC information.
This means that the maximum value is 11, even when the actual additional number/SSC information length is greater
than 11. When the additional number/SSC has extension, it is indicated by the extension1 identifier being unequal to
'FF'. The remainder is stored in the EFEXT1 with the remaining length of the additional data being coded in the
appropriate additional record itself (see clause 4.4.2.4).
Coding:
- same as the length of BCD number/SSC string byte in EFADN.
-
TON and NPI.
Contents:
- Type of number (TON) and numbering plan identification (NPI).
Coding:
- same as the TON and NPI byte in EFADN.
-
Additional number/SSC string
Content:
- up to 20 digits of the additional phone number and/or SSC information linked to the phone book entry.
Coding:
- same as the dialling number /SSC string in EFADN.
-
Capability/Configuration1 Record Identifier.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
128
ETSI TS 131 102 V13.3.0 (2016-04)
Contents:
- This byte identifies the number of a record in the EFCCP1 containing associated capability/configuration parameters
required for the call. The use of this byte is optional. If it is not used it shall be set to 'FF'.
Coding:
- binary.
-
Extension1 Record Identifier.
Contents:
- extension1 record identification byte. This byte identifies the number of a record in the EFEXT1 containing an
associated called party subaddress or additional data. The use of this byte is optional. If it is not used it shall be set to
'FF'.
if the number requires both additional data and called party subaddress, this byte identifies the additional record. A
chaining mechanism inside EFEXT1 identifies the record of the appropriate called party subaddress (see clause 4.4.2.4).
Coding:
- binary.
-
ADN file SFI.
Content:
- Short File identifier of the associated EFADN file.
Coding:
- as defined in the UICC specification.
-
ADN file Record Identifier
Content:
- record identifier of the associated phone book entry.
Coding:
- 'xx' – record identifier of the corresponding ADN record.
4.4.2.10
EFSNE (Second Name Entry)
The phone book also contains the option of a second name entry. The amount of second name entries may be less than
or equal to the amount of records in EFADN. Each record contains a second name entry. This record cannot be shared
between several phonebook entries.
Structure of EFSNE
Identifier: '4FXX'
SFI: 'YY'
Record length: X or X+2 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Structure: linear fixed
Optional
Update activity: low
PIN
PIN
ADM
ADM
Bytes
Description
M/O
Length
1 to X
Alpha Identifier of Second Name
M
X bytes
X+1
ADN file SFI
C
1 byte
X+2
ADN file Record Identifier
C
1 byte
NOTE:
The fields marked C above are mandatory if and only if the file is not type 1 (as
specified in EFPBR)
-
Alpha Identifier of Second Name.
Content:
- string defining the second name of the phone book entry.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
129
ETSI TS 131 102 V13.3.0 (2016-04)
Coding:
- as the alpha identifier for EFADN.
-
ADN file SFI.
Content:
- Short File identifier of the associated EFADN file.
Coding:
- as defined in the UICC specification.
-
ADN file Record Identifier
Content:
record identifier of the associated phone book entry.
Coding:
'xx' – record identifier of the corresponding ADN record.
4.4.2.11
EFCCP1 (Capability Configuration Parameters 1)
This EF contains parameters of required network and bearer capabilities and ME configurations associated with a call
established using a phone book entry.
Structure of EFCCP1
Identifier: '4FXX'
SFI: 'YY'
Record length: X bytes, X ≥ 15
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
-
Structure: linear fixed
Optional
Update activity: low
PIN
PIN
ADM
ADM
Description
Bearer capability information element
M/O
M
Length
X bytes
Bearer capability information element.
Contents and Coding:
- see TS 24.008 [9]. The Information Element Identity (IEI) shall be excluded; i.e. the first byte of the EFCCP1 record
shall be Length of the bearer capability contents.
''- unused bytes are filled with 'FF'
4.4.2.12
Phone Book Synchronisation
To support synchronisation of phone book data with other devices, the USIM may provide the following files to be used
by the synchronisation method: a phone book synchronisation counter (PSC), a unique identifier (UID) and change
counter (CC) to indicate recent changes.
If synchronisation is supported in the phonebook, then EFPSC, EFUID, EFPUID and EFCC are all mandatory.
4.4.2.12.1
EFUID (Unique Identifier)
The EFUID is used to uniquely identify a record and to be able to keep track of the entry in the phone book. The terminal
assigns the (UID) when a new entry is created. The value of the UID does not change as long as the value of the PBID
remains the same. The UID shall remain on the UICC, in EFUID, until the PBID is regenerated. This means that when a
phone book entry is deleted, the content of the linked information (e.g. ADN, E-MAIL,..) shall be set to the
personalization value 'FF…FF'. But the UID-value of the deleted record shall not be used when a new entry is added to
the phonebook until the PBID is regenerated, but it shall be set to a new value.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
130
ETSI TS 131 102 V13.3.0 (2016-04)
If/when the PBID is regenerated, all UIDs for the entry in the phone book shall be assigned new values starting from 1.
If more than one EFUID exists (i.e. multiple phone book file sets) then all values of UIDs used in that phone book shall
be unique over all phone book file sets within that phone book. The new value of the UID for each entry shall then be
kept until the PBID is regenerated again.
Structure of EFUID
Identifier: '4FXX'
Structure: linear fixed
SFI: 'YY'
Record length: 2 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Conditional
(see Note)
Update activity: low
PIN
PIN
ADM
ADM
Bytes
Description
M/O
Length
1 to 2
Unique Identifier (UID) of Phone Book Entry
M
2 bytes
NOTE:
This file is mandatory if and only if synchronisation is supported in the phonebook.
-
Unique Identifier of Phone Book Entry.
Content:
- number to unambiguously identify the phone book entry for synchronisation purposes.
Coding:
- hexadecimal value. At initialisation all UIDs are personalised to ''00 00'' (i.e. empty).
4.4.2.12.2
EFPSC (Phone book Synchronisation Counter)
The phone book synchronisation counter (PSC) is used by the ME to construct the phone book identifier (PBID) and to
determine whether the accessed phone book is the same as the previously accessed phone book or if it is a new
unknown phone book (might be the case that there is one phonebook under DF-telecom and one phone book residing in
a USIM-application). If the PSC is unknown, a full synchronisation of the phone book will follow.
The PSC is also used to regenerate the UIDs and reset the CC to prevent them from running out of range. When the
UIDs or the CC has reached its maximum value, a new PSC is generated. This leads to a scenario where neither the CC
nor the UIDs will run out of range.
The PSC shall be regenerated by the terminal if one of the following situation applies:
- the values of the UIDs have run out of range;
- the whole phone book has been reset/deleted;
- the value of the CC has run out of range.
Structure of EFPSC
Identifier: '4F22'
Structure: transparent
SFI: 'YY'
File size: 4 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Conditional
(see Note)
Update activity: low
PIN
PIN
ADM
ADM
Bytes
Description
M/O
Length
1 to 4
Phone book synchronisation counter (PSC)
M
4 bytes
NOTE:
This file is mandatory if and only if synchronisation is supported in the phonebook.
-
PSC: Unique synchronisation counter of Phone Book.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
131
ETSI TS 131 102 V13.3.0 (2016-04)
Content:
number to unambiguously identify the status of the phone book for synchronisation purposes.
Coding:
hexadecimal value.
The phone book identifier (PBID) coding based on the EFPSC is described hereafter:
-
PBID = ICCid (10bytes) "fixed part" + 4 bytes (in EFPSC) "variable part".
-
-
For a phone book residing in DF-telecom:
For a phone book residing in an USIM application:
PBID = 10 last bytes of (ICCid XOR AID) "fixed part" + 4 bytes (in EFPSC) "variable part".
To be able to detect if the PSC needs to be regenerated (i.e. the variable part) the following test shall be made by
the terminal before for each update of either the CC or the assignment of a new UID:
-
Each time the terminal has to increment the value of the UID the following test is needed:
-
If UID = 'FF FF' then.
{Increment PSC mod 'FF FF FF FF'; all the UIDs shall be regenerated}.
-
Each time the terminal has to increment the value of CC the following test is needed:
If CC = 'FF FF' then.
{Increment PSC mod 'FF FF FF FF'; CC=0001}.
NOTE:
If the phonebook is deleted then the terminal will change the PSC according to:
Incrementing PSC modulus 'FFFFFFFF'.
4.4.2.12.3
EFCC (Change Counter)
The change counter (CC) shall be used to detect changes made to the phone book.
Every update/deletion of an existing phone book entry or the addition of a new phone book entry causes the terminal to
increment the EFCC. The concept of having a CC makes it possible to update the phone book in different terminals,
which still are able to detect the changes (e.g. changes between different handset and/or 2nd and 3rd generation of
terminals).
Structure of EFCC
Identifier: '4F23'
Structure: transparent
SFI: 'YY'
File size: 2 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Conditional
(see Note)
Update activity: high
PIN
PIN
ADM
ADM
Bytes
Description
M/O
Length
1 to 2
Change Counter (CC) of Phone Book
M
2 bytes
NOTE:
This file is mandatory if and only if synchronisation is supported in the phonebook.
-
Change Counter of Phone Book.
Content:
- indicates recent change(s) to phone book entries for synchronisation purposes.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
132
ETSI TS 131 102 V13.3.0 (2016-04)
Coding:
- hexadecimal value. At initialisation, CC shall be personalised to '00 00' (i.e. empty).
4.4.2.12.4
EFPUID (Previous Unique Identifier)
The PUID is used to store the previously used unique identifier (UID). The purpose of this file is to allow the terminal
to quickly generate a new UID, which shall then be stored in the EFUID.
Structure of EFPUID
Identifier: '4F24'
Structure: transparent
SFI: 'YY'
File size: 2 bytes
Conditional
(see Note)
Update activity: high
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
PIN
PIN
ADM
ADM
Bytes
1 to 2
NOTE:
-
Description
M/O
Length
Previous Unique Identifier (PUID) of Phone
M
2 bytes
Book Entry
This file is mandatory if and only if synchronisation is supported in the phonebook.
Previous unique Identifier of Phone Book Entry.
Content:
- Previous number that was used to unambiguously identify the phone book entry for synchronisation purposes.
Coding:
-
As for EFUID
4.4.2.13
EFEMAIL (e-mail address)
This EF contains the e-mail addresses that may be linked to a phone book entry. Several e-mail addresses can be
attached to one EFADN record, using one or several EFEMAIL. The number of email addresses may be equal to or less
than the amount of records in EFADN. Each record contains an e-mail address. The first part indicates the e-mail
address, and the second part indicates the reference to the associated record in the EFADN file. This record cannot be
shared between several phonebook entries.
Structure of EFEMAIL
Identifier: '4FXX'
SFI: 'YY'
Record length: X or X+2 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Structure: linear fixed
Optional
Update activity: low
PIN
PIN
ADM
ADM
Bytes
Description
M/O
Length
1 to X
E-mail Address
M
X bytes
:
:
:
:
:
:
:
:
X+1
ADN file SFI
C
1 byte
X+2
ADN file Record Identifier
C
1 byte
NOTE:
The fields marked C above are mandatory if and only if the file is not type 1 (as
specified in EFPBR)
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
133
ETSI TS 131 102 V13.3.0 (2016-04)
- E-mail Address.
Content:
- string defining the e-mail address
Coding:
- the SMS default 7-bit coded alphabet as defined in TS 23.038 [5] with bit 8 set to 0. The alpha identifier shall be left
justified. Unused bytes shall be set to 'FF'.
-
ADN file SFI.
Content:
- short File identifier of the associated EFADN file.
Coding:
- as defined in TS 31.101 [11].
-
ADN file Record Identifier.
Content:
- record identifier of the associated phone book entry.
Coding:
- binary.
4.4.2.14
Phonebook restrictions
This clause lists some general restrictions that apply to the phonebook:
-
if an EFPBR file contains more than one record, then they shall all be formatted identically on a type-by-type
basis, e.g. if EFPBR record #1 contains one type 1 e-mail then all EFPBR records shall have one type 1 email;
-
if an EFPBR record contains more than one reference to one kind of file, such as two EFEMAIL files, then they
shall all be formatted identically on a type-by-type basis, e.g. if an EFPBR record has 2 email addresses, then
they shall have the same record size and the same number of records in each EFPBR entry;
-
an EFPBR record may contain TLV entries indicating that the file exist as a type 1 and 2 file, e.g. a phonebook
entry may have two emails, one with a one-to-one mapping (type 1) and one with a indirect mapping (type 2).
Regardless of the type, files in all entries shall have the same record configuration;
-
an EFPBR record shall not contain more than one occurrence of a given kind of file indicated in tag 'AA' (type 3
link). For instance, an EFPBR record may only contain one reference to an EFEXT1.
4.4.2.15
EFPURI (Phonebook URIs)
This EF contains the URI address that may be linked to a phonebook entry. Several URI addresses can be attached to
one EFADN record, using one or several EFPURI. The number of URI addresses may be equal to or less than the amount
of records in EFADN. Each record contains a URI address. The first part indicates the URI address, and the second part
indicates the reference to the associated record in the EFADN file. This record cannot be shared between several
phonebook entries.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
134
ETSI TS 131 102 V13.3.0 (2016-04)
Structure of EFPURI
Identifier: '4FXX'
SFI: 'YY'
Record length: X or X+2 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Structure: linear fixed
Optional
Update activity: low
PIN
PIN
ADM
ADM
Bytes
Description
M/O
Length
1 to X
URI Address
M
X bytes
X+1
ADN file SFI
C
1 byte
X+2
ADN file Record Identifier
C
1 byte
NOTE:
The fields marked C above are mandatory if and only if the file is not type 1 (as
specified in EFPBR)
- URI Address.
Content:
- The URI Address associated to the ADN Record.
Coding:
- Same as URI TLV data object in EFIMPU defined in TS 31.103 [64].
-
ADN file SFI.
Content:
- Short File identifier of the associated EFADN file.
Coding:
- as defined in TS 31.101 [11].
-
ADN file Record Identifier.
Content:
- record identifier of the associated phone book entry.
Coding:
- binary.
4.4.3
Contents of files at the DF GSM-ACCESS level
(Files required for GSM Access)
The Efs described in this clause are required for the USIM application to be able to access service through a GSM
network.
The presence of this DF and thus the support of a GSM access is indicated in the 'USIM Service Table' as service no.
'27' being available.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
4.4.3.1
135
ETSI TS 131 102 V13.3.0 (2016-04)
EFKc (GSM Ciphering key Kc)
If service n°27 is "available", this file shall be present.
This EF contains the ciphering key Kc and the ciphering key sequence number n for enciphering in a GSM access
network.
Identifier: '4F20'
SFI: '01'
File size: 9 bytes
Structure: transparent
Update activity: high
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 8
9
Optional
PIN
PIN
ADM
ADM
Description
Ciphering key Kc
Ciphering key sequence number n
M/O
M
M
Length
8 bytes
1 byte
- Ciphering key Kc.
Coding:
- the least significant bit of Kc is the least significant bit of the eighth byte. The most significant bit of Kc is the most
significant bit of the first byte.
- Ciphering key sequence number n
Coding:
b8
b7
b6
b5
b4
b3
b2
b1
N
bits b4 to b8 are coded 0
NOTE:
4.4.3.2
TS 24.008 [9] defines the value of n=111 as "key not available". Therefore the value '07' and not 'FF'
should be present following the administrative phase.
EFKcGPRS (GPRS Ciphering key KcGPRS)
If service n°27 is "available", this file shall be present.
This EF contains the ciphering key KcGPRS and the ciphering key sequence number n for GPRS (see TS 23.060 [7]).
Identifier: '4F52'
SFI: '02
File size: 9 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 8
9
Structure: transparent
Optional
Update activity: high
PIN
PIN
ADM
ADM
Description
Ciphering key KcGPRS
Ciphering key sequence number n for GPRS
M/O
M
M
Length
8 bytes
1 byte
- Ciphering key KcGPRS.
Coding:
the least significant bit of KcGPRS is the least significant bit of the eighth byte. The most significant bit of KcGPRS
is the most significant bit of the first byte.
-
Ciphering key sequence number n for GPRS.
Coding:
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
b8
b7
b6
b5
b4
b3
136
b2
ETSI TS 131 102 V13.3.0 (2016-04)
b1
n
bits b4 to b8 are coded 0
NOTE:
TS 24.008 [9] defines the value of n=111 as "key not available". Therefore the value '07' and not 'FF'
should be present following the administrative phase.
4.4.3.3
Void
4.4.3.4
EFCPBCCH (CPBCCH Information)
If service n°39 is "available", this file shall be present.
This EF contains information concerning the CPBCCH according to TS 44.018 [28].
CPBCCH storage may reduce the extent of a Mobile Station's search of CPBCCH carriers when selecting a cell. The
CPBCCH carrier lists shall be in accordance with the procedures specified TS 23.022 [29]. The MS stores CPBCCH
information (from the System Information 19 message, Packet System Information 3, and Packet System Information 3
bis) on the USIM. The same CPBCCH carrier shall never occur twice in the list.
Identifier: '4F63'
File size: 2n bytes
Structure: transparent
Optional
Update activity: high
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 2
:
2n-1 to 2n
PIN
PIN
ADM
ADM
Description
Element 1 of CPBCCH carrier list
:
Element n of CPBCCH carrier list
M/O
M
:
M
Length
2 bytes
:
2 bytes
- Element in CPBCCH carrier list
Coding:
Byte 1: first byte of CPBCCH carrier list element
b8
b7
b6
b5
b4
b3
b2
b1
LSB of ARFCN
:
:
:
:
:
:
:
Byte 2: second byte of CPBCCH carrier list element
b8
b7
b6
b5
b4
b3
b2
b1
:
MSB of ARFCN
High/Low band indicator
bits b4 to b7 are RFU
Empty indicator
-
ARFCN (10 bits) as defined in TS 45.005 [34].
-
High/Low band indicator: If the ARFCN indicates possibly a channel in the DCS 1800 or a channel in the
PCS 1900 band, if the bit is set to '1' the channel is in the higher band (GSM 1900). If the bit is set to '0',
the lower band (GSM 1800) is indicated. If ARFCN indicates a unique channel, this indicator shall be set
to '0'.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
-
4.4.3.5
137
ETSI TS 131 102 V13.3.0 (2016-04)
Empty indicator: If this bit is set to '1', no valid CPBCCH carrier is stored in this position. If the Empty
Indicator is set to '1', the content of the CPBCCH carrier field shall be ignored. The empty indicator shall
also be used, and set to '1', if storage of fewer than maximum number n, of CPBCCH carrier fields is
required.
EFInvScan (Investigation Scan)
If service n°40 is "available", this file shall be present.
This EF contains two flags used to control the investigation scan for higher prioritized PLMNs not offering voice
services.
Identifier: '4F64'
File size: 1 byte
Structure: transparent
Optional
Update activity: low
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
-
PIN
ADM
ADM
ADM
Description
Investigation scan flags
M/O
M
Length
1 byte
Investigation scan flags
Coding:
b8
b7
b6
b5
b4
b3
b2
b1
In limited service mode
After successful PLMN selection
Bits b3 to b8 are coded RFU
A '1' in a bit position indicates that the investigation scan shall be performed for the condition
corresponding to that bit position and a '0' that it shall not be performed.
If this elementary file is not present, no investigation scan shall be performed.
4.4.4
Contents of files at the MexE level
This clause specifies the Efs in the dedicated file DFMexE. It only applies if the USIM supports MexE (see
TS 23.057 [30]).
The presence of this DF is indicated in the 'USIM Service Table' as service no. '41' being available.
The Efs in the Dedicated File DFMexE contain execution environment related information.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
4.4.4.1
138
ETSI TS 131 102 V13.3.0 (2016-04)
EFMexE-ST (MexE Service table)
If service n°41 is "available", this file shall be present.
This EF indicates which MexE services are available. If a service is not indicated as available in the USIM, the ME
shall not select this service.
Identifier: '4F40'
File size: X bytes, X ≥ 1
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2
etc.
X
-Services
Contents:
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
Services n°1 to n°8
Services n°9 to n°16
Services (8X-7) to (8X)
Service n°1:
Service n°2:
Service n°3:
Service n°4:
M/O
M
O
Length
1 byte
1 byte
O
1 byte
Operator Root Public Key
Administrator Root Public Key
Third Party Root Public Key
RFU
Coding:
the coding rules of the USIM Service Table apply to this table.
4.4.4.2
EFORPK (Operator Root Public Key)
If service n°41 is "available", this file shall be present.
This EF contains the descriptor(s) of certificates containing the Operator Root Public Key. This EF shall only be
allocated if the operator wishes to verify applications and certificates in the MexE operator domain using a root public
key held in the USIM. Each record of this EF contains one certificate descriptor.
For example, an operator may provide a second key for recover disaster procedure in order to limit OTA data to load.
Identifier: '4F41'
Record length: X + 10 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2
3
4 to 5
6 to 7
8 to 9
10
11 to 10+X
Structure: linear fixed
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
Parameters indicator
Flags
Type of certificate
Key/certificate file identifier
Offset into key/certificate file
Length of key/certificate data
Key identifier length (X)
Key identifier
M/O
M
M
M
M
M
M
M
M
- Parameter indicator
Contents:
The parameter indicator indicates if record is full and which optional parameters are present
ETSI
Length
1 byte
1 byte
1 byte
2 bytes
2 bytes
2 bytes
1 byte
X bytes
3GPP TS 31.102 version 13.3.0 Release 13
139
ETSI TS 131 102 V13.3.0 (2016-04)
Coding: bit string
b8
b7
b6
b5
b4
b3
b2
b1
Certificate descriptor is valid (bit1=0 key
descriptor is valid)
Reserved bit set to 1 (bitx=0 optional parameter
present)
- Flags
Contents:
The authority flag indicates whether the certificate identify an authority (i.e. CA or AA) or not.
Coding: bit string
b8
b7
b6
b5
b4
b3
b2
b1
Authority certificate (bit=1 certificate of an
authority)
RFU
RFU
-
Type of certificate
Contents:
This field indicates the type of certificate containing the key.
Coding: binary:
0 : WTLS
1 : X509
2 : X9.68
Other values are reserved for further use
-
Key/certificate File Identifier
Contents:
these bytes identify an EF which is the key/certificate data file (see clause 4.4.4.5), holding the actual key/certificate
data for this record.
Coding:
byte 4: high byte of Key/certificate File Identifier;
byte 5: low byte of Key/certificate File Identifier.
-
Offset into Key/certificate File
Contents:
these bytes specify an offset into the transparent key/certificate data File identified in bytes 4 and 5.
Coding:
byte 6: high byte of offset into Key/certificate Data File;
byte 7: low byte of offset into Key/certificate Data File
-
Length of Key/certificate Data
Contents:
these bytes yield the length of the key/certificate data, starting at the offset identified in "Offset into Key/certificate
File" field.
Coding:
byte 8: high byte of Key/certificate Data length;
byte 9: low byte of Key/certificate Data length.
-
Key identifier length
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
140
ETSI TS 131 102 V13.3.0 (2016-04)
Contents:
This field gives length of key identifier
Coding:
binary
-
Key identifier
Contents:
This field provides a means of identifying certificates that contain a particular public key (chain building) and linking
the public key to its corresponding private key. For more information about value and using see TS 23.057 [30].
Coding:
octet string
NOTE:
4.4.4.3
transparent key/certificate data longer than 256 bytes may be read using successive READ BINARY
commands.
EFARPK (Administrator Root Public Key)
If service n°41 is "available", this file shall be present.
This EF contains the descriptor(s) of certificates containing the Administrator Root Public Key. This EF shall only be
allocated if the SIM issuer wishes to control the Third Party certificates on the terminal using an Administrator root
public key held in the USIM. Each record of this EF contents one certificate descriptor.
This file shall contain only one record.
Identifier: '4F42'
Record length: X + 10 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2
3
4 to 5
6 to 7
8 to 9
10
11 to 10+X
Structure: linear fixed
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
Parameters indicator
Flags
Type of certificate
Key/certificate file identifier
Offset into key/certificate file
Length of key/certificate data
Key identifier length (X)
Key identifier
M/O
M
M
M
M
M
M
M
M
Length
1 byte
1 byte
1 byte
2 bytes
2 bytes
2 bytes
1 byte
X bytes
For contents and coding of all data items see the respective data items of the EFORPK (clause 4.4.4.2).
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
4.4.4.4
141
ETSI TS 131 102 V13.3.0 (2016-04)
EFTPRPK (Third Party Root Public Key)
If service n°41 is "available", this file shall be present.
This EF contains descriptor(s) of certificates containing the Third Party root public key (s). This EF shall only be
allocated if the USIM issuer wishes to verify applications and certificates in the MexE Third Party domain using root
public key(s) held in the USIM. This EF can contain one or more root public keys. Each record of this EF contains one
certificate descriptor.
For example, an operator may provide several Third Party Root Public Keys.
Identifier:'4F43'
Record length: X + Y + 11 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2
3
4 to 5
6 to 7
8 to 9
10
11 to 10+X
11+X
12+X to
11+X+Y
Structure: linear fixed
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
Parameters indicator
Flags
Type of certificate
Key/certificate file identifier
Offset into key/certificate file
Length of key/certificate data
Key identifier length (X)
Key identifier
Certificate identifier length (Y)
Certificate identifier
M/O
M
M
M
M
M
M
M
M
M
M
Length
1 byte
1 byte
1 byte
2 bytes
2 bytes
2 bytes
1 byte
X bytes
1 byte
Y bytes
- Certificate identifier length
Contents:
This field gives the length of the certificate identifier
Coding:
binary
- Certificate identifier
Contents:
This field identifies the issuer and provides an easy way to find a certificate. For more information about the value and
usage see TS 23.057 [30].
Coding:
Octet string
For contents and coding of all other data items see the respective data items of the EFORPK (clause 4.4.4.2).
4.4.4.5
EFTKCDF (Trusted Key/Certificates Data Files)
Residing under DFMexE, there may be several key/certificates data files. These Efs containing key/certificates data shall
have the following attributes:
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
142
Identifier: '4FXX'
File size: Y bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to Y
ETSI TS 131 102 V13.3.0 (2016-04)
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
Key/Certificate Data
M/O
M
Length
Y bytes
Contents and coding:
Key/certificate data are accessed using the key/certificates descriptors provided by EFTPRPK (see clause 4.4.4.4).
The identifier '4FXX' shall be different from one key/certificate data file to another. For the range of 'XX', see
TS 31.101 [11]. The length Y may be different from one key/certificate data file to another.
4.4.5
Contents of files at the DF WLAN level
This clause describes the additional files that are used for WLAN purposes.
DFWLAN shall be present at the ADFUSIM level if either of the services nº59, nº60, nº61, nº62, nº63, nº66, n°81, n°82,
n°83, n°84 or n°88 are "available" in the corresponding EFUST (USIM Service Table).
4.4.5.1
EFPseudo (Pseudonym)
If service n°59 is "available", this file shall be present.
This EF contains a temporary user identifier (pseudonym) for subscriber identification. Pseudonyms may be provided as
part of a previous authentication sequence. Pseudonyms are used as defined in TS 24.234 [40].
Identifier: '4F41'
SFI : '01'
File size: Y bytes (Y≥n+2)
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 2
3 to n+2
Structure: Transparent
Optional
Update activity: high
PIN
PIN
ADM
ADM
Description
Pseudonym Length
Pseudonym
M/O
M
M
Length
2 bytes
n bytes
-Pseudonym Length
Contents:
- these bytes give the number of bytes of the following data item containing the Pseudonym value.
Coding:
- unsigned length coded on 2 bytes
- Pseudonym.
Contents:
-Pseudonym to be used as the username part of the NAI
Coding:
- As described for the user portion of the NAI in TS 33.234 [41]. Unused bytes shall be set to 'FF' and shall
not be considered as a part of the value.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
4.4.5.2
143
ETSI TS 131 102 V13.3.0 (2016-04)
EFUPLMNWLAN (User controlled PLMN selector for I-WLAN Access)
If service n°60 is "available", this file shall be present.
This EF contains the coding for preferred PLMNs to be used for WLAN PLMN Selection. This information is
determined by the user and defines the preferred PLMNs of the user in priority order. The first PLMN entry indicates
the highest priority and the nth PLMN entry indicates the lowest. It shall be possible to store at least the number of
PLMNs specified in TS 24.234 [40].
Identifier: '4F42'
SFI: '02'
File size: 3n (where n ≥10)
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 3
4 to 6
:
28 to 30
31 to 33
:
(3n-2) to 3n
Structure: transparent
Optional
Update activity: low
PIN
PIN
ADM
ADM
Description
st
1 PLMN (highest priority)
nd
2 PLMN
:
th
10 PLMN
th
11 PLMN
:
th
N PLMN (lowest priority)
M/O
M
M
Length
3 bytes
3 bytes
M
O
3 bytes
3 bytes
O
3 bytes
- PLMN
Contents:
- Mobile Country Code (MCC) followed by the Mobile Network Code (MNC).
Coding:
- according to TS 24.008 [9].
4.4.5.3 EFOPLMNWLAN (Operator controlled PLMN selector for I-WLAN
Access)
If service n°61 is "available", this file shall be present.
This EF contains the coding for operator preferred PLMNs to be used for WLAN PLMN Selection. This information is
determined by the operator and defines the operator preferred PLMNs in priority order. The first PLMN entry indicates
the highest priority and the nth PLMN entry indicates the lowest. It shall be possible to store at least the number of
PLMNs specified in TS 24.234 [40].
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
144
Identifier: '4F43'
SFI: '03'
File size: 3n (where n ≥10)
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 3
4 to 6
:
28 to 30
31 to 33
:
(3n-2) to 3n
ETSI TS 131 102 V13.3.0 (2016-04)
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
st
1 PLMN (highest priority)
nd
2 PLMN
:
th
10 PLMN
th
11 PLMN
:
th
N PLMN (lowest priority)
M/O
M
M
Length
3 bytes
3 bytes
M
O
3 bytes
3 bytes
O
3 bytes
- PLMN
Contents:
- Mobile Country Code (MCC) followed by the Mobile Network Code (MNC).
Coding:
- according to TS 24.008 [9].
4.4.5.4
EFUWSIDL (User controlled WLAN Specific Identifier List)
If service n°62 is "available", this file shall be present.
This file contains the user preferred list of WLAN specific identifier (WSID) for WLAN selection in priority order. The
first record indicates the highest priority and the nth record indicates the lowest. This file is used for WLAN selection
and shall store a list of at least the number of WSIDs specified in TS 24.234 [40].
Identifier: '4F44'
SFI: '04'
Record size: X+1 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2 to X + 1
Structure: linear fixed
Optional
Update activity: low
PIN
PIN
ADM
ADM
Description
Length of WSID
WSID
M/O
M
M
Length
1 bytes
X bytes
-Length of WSID
Contents:
- this byte gives the number of bytes of the following data item containing the WSID.
Coding:
- unsigned length coded on one byte
-WSID
Contents:
- WLAN specific identifier (WSID) as defined in TS 24.234 [40].
Coding:
- binary. Unused bytes shall be set to 'FF' and not used either as a part of the value or for length calculation.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
4.4.5.5
145
ETSI TS 131 102 V13.3.0 (2016-04)
EFOWSIDL (Operator controlled WLAN Specific IdentifierList)
If service n°63 is "available", this file shall be present.
This file contains the operator preferred list of WLAN specific identifier (WSID) for WLAN selection in priority order.
The first record indicates the highest priority and the nth record indicates the lowest. This file is used for WLAN
selection It shall be possible to store at least the number of PLMNs specified in TS 24.234 [40].
Identifier: '4F45'
SFI: '05'
Record size: X + 1 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2 to X + 1
Structure: linear fixed
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
Length of WSID
WSID
M/O
M
M
Length
1 bytes
X bytes
-Length of WSID
Contents:
- this byte gives the number of bytes of the following data item containing the WSID.
Coding:
- unsigned length coded on one byte
-WSID
Contents:
- WLAN specific identifier (WSID) as defined in TS 24.234 [40].
Coding:
- binary. Unused bytes shall be set to 'FF' and not used either as a part of the value or for length calculation.
4.4.5.6
EFWRI (WLAN Reauthentication Identity)
If service n°66 is "available", this file shall be present.
This EF contains a list of parameters linked to a re-authentication identity to be used in fast re-authentication. Reauthentication identities and related parameters (Master Key and Counter Value) are provided as part of a previous
authentication sequence.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
146
Identifier: '4F46'
SFI: '06'
File size: n bytes, (n ≥ J+K+L+6)
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2
3 to J+2
J+3
J+4
J+5 to J+K+4
J+K+5
J+K+6
J+K+7 to
J+K+L+6
ETSI TS 131 102 V13.3.0 (2016-04)
Structure: Transparent
Optional
Update activity: high
PIN
PIN
ADM
ADM
Description
Reauthentication Identity Tag '80'
Re-authentication Identity Length
Re-authentication Identity Value
Master Key Tag '81'
Master Key Length
Master Key Value
Counter Tag '82'
Counter Length
Counter Value
M/O
M
M
M
M
M
M
M
M
M
Length
1 byte
1 byte
J bytes
1 byte
1 byte
K bytes
1 byte
1 byte
L bytes
- Reauthentication Identity
Contents:
- Re-authentication identity TLV to be used as the username part of the NAI.
Coding:
Tag '80'
Unsigned length on 1 byte
Value: As described for the user portion of the NAI in TS 33.234 [41]. Unused bytes shall be set to 'FF' and shall not be
considered as a part of the value.
- Master Key
Contents:
- Master Key TLV.
Coding:
Tag '81'
Unsigned length on 1 byte
Value: As described in TS 33.234 [41].
- Counter
Contents:
- Counter TLV
Coding:
Tag '82'
Unsigned length on 1 byte
Value: As described in TS 33.234 [41].
4.4.5.7
EFHWSIDL (Home I-WLAN Specific Identifier List)
If service n°81 is "available", this file shall be present.
This file contains the Home I-WLAN specific identifier list (WSID list) for I-WLAN selection in priority order. The
WSIDs in this list are known to connect to the HPLMN. The first record indicates the highest priority and the nth record
indicates the lowest. This file is used for I-WLAN selection. It shall be possible to store at least the number of WSIDs
specified in TS 24.234 [40].
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
147
Identifier: '4F47'
SFI: '07'
Record size: X + 1 bytes
Structure: linear fixed
Optional
Update activity: low
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2 to X + 1
ETSI TS 131 102 V13.3.0 (2016-04)
PIN
ADM
ADM
ADM
Description
M/O
M
M
Length of WSID
WSID
Length
1 bytes
X bytes
For contents and coding see EFOWSIDL.
4.4.5.8
EFWEHPLMNPI (I-WLAN Equivalent HPLMN Presentation Indication)
If service n°82 is "available", this file shall be present.
This EF contains an indication to the ME for the presentation of the available EHPLMN(s) during I-WLAN selection
procedures. The usage of the I-WLAN EHPLMN presentation indication is defined in TS 24.234 [40].
Identifier: '4F48'
SFI: '08'
File size: 1 byte
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
-
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
I-WLAN EHPLMN Presentation Indication
M/O
M
Length
1 byte
I-WLAN EHPLMN Presentation Indication:
Contents:
I-WLAN EHPLMN display mode
Coding:
- '00' - No preference for the display mode
-
'01' - Display the highest-priority available EHPLMN only
-
'02' - Display all the available EHPLMNs
-
All other values are RFU
4.4.5.9
EFWHPI (I-WLAN HPLMN Priority Indication)
If service n°83 is "available", this file shall be present.
This EF contains an indication to the ME for the selection of the I-WLAN EHPLMN or the I-WLAN last Registered
PLMN. The usage of the I-WLAN HPLMN Priority Indication file is defined in TS 24.234 [40].
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
148
Identifier: '4F49'
SFI: '09'
File size: 1 byte
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
-
ETSI TS 131 102 V13.3.0 (2016-04)
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
I-WLAN Last RPLMN Selection Indication
M/O
M
Length
1 byte
I-WLAN Last RPLMN Selection Indication:
Contents:
I-WLAN Last RPLMN Selection Indication
Coding:
- '00' - The UE shall attempt registration on the last I-WLAN RPLMN as described in TS 24.234 [40]
-
'01' - The UE shall attempt registration on the I-WLAN home network as described in TS 24.234 [40]
-
All other values are RFU
4.4.5.10
EFWLRPLMN (I-WLAN Last Registered PLMN)
If service n°84 is "available", this file shall be present.
This EF contains I-WLAN Last Registered PLMN Selection. The usage of the I-WLAN Last Registered PLMN is
defined in TS 24.234 [40].
Identifier: '4F4A'
SFI: '0A'
File size: 3 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 3
-
-
Structure: transparent
Optional
Update activity: low
PIN
PIN
ADM
ADM
Description
I-WLAN Last Registered PLMN
M/O
M
Length
3 bytes
I-WLAN Last Registered PLMN
Contents:
- Mobile Country Code (MCC) followed by the Mobile Network Code (MNC).
Coding:
according to TS 24.008 [9].
4.4.5.11
EFHPLMNDAI (HPLMN Direct Access Indicator)
If service n°88 is "available", this file shall be present.
This EF contains HPLMN Direct Access related informations. The usage of the HPLMN Direct Access Indicator file is
defined in TS 23.234 [40].
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
149
Identifier: '4F4B'
SFI: '0B'
File size: 1 byte
Structure: transparent
-
Optional
Update activity: low
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
ETSI TS 131 102 V13.3.0 (2016-04)
PIN
ADM
ADM
ADM
Description
HPLMN Direct Access Indication
M/O
M
Length
1byte
HPLMN Direct Access Indication:
Contents:
HPLMN Direct Access Indication
Coding:
- '00' – HPLMN Direct Access Indicator is disabled
-
-
'01' – HPLMN Direct Access Indicator is enabled
All other values are RFU
4.4.6
Contents of files at the DF HNB level
4.4.6.1
Introduction
This clause describes the additional files that are used for Home (e)NodeB purposes.
DFHNB shall be present at the ADFUSIM level if service nº86 and/or service nº90 isare "available" in EFUST .
4.4.6.2
EFACSGL (Allowed CSG Lists)
If service n°86 is "available", this file shall be present.
This EF contains the coding for CSG ID belonging to the Allowed CSG lists. Furthermore, for each CSG ID in the list,
a link to the corresponding HNB name and CSG Type may be provided.
Identifier: '4F81'
SFI: '01'
Record length: X
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Structure: linear fixed
Optional
Update activity: low
PIN
PIN
ADM
ADM
Bytes
Description
M/O
1 to X
CSG Lists TLV object
M
Note: The CSG List in different records may contain the same PLMN
Length
X bytes
The CSG List TLV object shall contain only one PLMN TLV object, Tag '80', and at least one CSG information TLV,
Tag '81'. A record may contain one or more CSG List TLV objects. This means that all CSG Ids in one CSG List TLV
object belong to the same PLMN.
CSG List Tags
Description
Tag Value
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
150
ETSI TS 131 102 V13.3.0 (2016-04)
'A0'
CSG List TLV object Tag
CSG List information
Description
Value
CSG List Tag
'A0'
Length
Y
PLMN Tag
'80'
Length
A
PLMN
-CSG Information Tag
'81'
Length
W
CSG Information
Note:
The length is coded according to ISO/IEC 8825-1 [35]
-
M/O
Length (bytes)
M
M
M
M
M
M
M
M
1
Note
1
Note
A
1
Note
W
PLMN Tag '80'
Contents:
Mobile Country Code (MCC) followed by the Mobile Network Code (MNC).
Coding:
according to TS 24.008 [47].
CSG Information Tag '81'
.
Tag '81' Coding:
1
CSG Type indication
M
2
HNB Name indication
M
3 to W
CSG ID
M
Note: The length of the CSG ID is calculated from the TLV object length
-
1 byte
1 byte
W-2 bytes
CSG Type indication
Contents:
the CSG Type for the subsequent CSG ID.
Coding:
a value of '00' indicates that the CSG Type is to be taken from other sources (e.g. stored in the nonvolatile memory of the ME). A value in the range '01' to 'FE' indicates the record number in EFCSGT
that shall be displayed as the CSG Type.
-
HNB Name indication
Contents:
the HNB name for the subsequent CSG ID.
Coding:
a value of '00' indicates that the HNB name is to be taken from other sources (e.g. broadcasted by the
Home Node B or stored in the non-volatile memory of the ME). A value in the range '01' to 'FE'
indicates the record number in EFHNBN that shall be displayed as the HNB name.
-
CSG ID
Contents:
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
151
ETSI TS 131 102 V13.3.0 (2016-04)
CSG ID which is part of the allowed CSG list.
Coding:
the CSG ID shall be encoded as defined in TS 23.003 [25]. The CSG ID is coded left justified, i.e. the
most significant bit of the CSG ID is coded on bit 8 of byte 3, over the number of bits as specified in
TS 23.003 [25] using bytes 3 to W . The unused rightmost bits of byte W shall be set 1.
Unused bytes shall be set to 'FF'.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
4.4.6.3
152
ETSI TS 131 102 V13.3.0 (2016-04)
EFCSGT (CSG Type)
If service n°86 is "available", this file shall be present.
This EF contains the CSG Type. The CSG Type is defined in TS 22.220 [54]. The association between a CSG ID and
the corresponding CSG Type is provided in EFACSGL. The CSG Type may be provided in text or in graphic format.
Identifier: '4F82'
SFI: '02'
Record length: X bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
Structure: linear fixed
Optional
Update activity: low
PIN
PIN
ADM
ADM
Description
CSG Type TLV objects
M/O
M
Length
X bytes
CSG Type tags
Description
Tag Value
'89'
'80' or '81'
Text CSG Type Tag
Graphics CSG Type Tag
CSG Type information
Contents:
CSG Type contains either Text CSG Type or Graphic CSG Type or both the Graphic and Text CSG Types
Coding:
Text CSG Type:
Description
Value
M/O
Text CSG Type Tag
'89'
M
Length
K
M
Text CSG Type
-M
Note:
The length is coded according to ISO/IEC 8825-1 [35].
Length (bytes)
1
Note
K
Graphic CSG Type:
Description
Value
M/O
Length (bytes)
Graphic CSG Type Tag
'80' or '81'
M
1
Length
K+1
M
Note 1
Graphic CSG Type Icon Qualifier
-M
1
Graphic CSG Type Icon Link
-M
K (Note 2)
Note 1: The length is coded according to ISO/IEC 8825-1 [35].
Note 2: The tag value indicates the type and format of the Icon Link that is provided in the
TLV value field (e.g. Tag '80' indicates that the Icon link is a URI, while Tag '81'
indicates that the Icon Link is the record number of the corresponding image in
EFIMG).
-
Text CSG Type Tag '89'
Contents:
Tag value for the CSG Type in text format.
Coding:
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
153
ETSI TS 131 102 V13.3.0 (2016-04)
- '89' = the Text CSG Type is coded using one of the UCS2 code options as defined in TS 31.101 [11].
-
Graphic CSG Type Tag
Contents:
Tag value for the CSG Type in graphic format with the Icon Qualifier or an Icon Link
Coding:
- '80' = the Graphic CSG Type Icon Link is an URI
- '81' = the Graphic CSG Type Icon Link is a pointer to the record number of the corresponding image in
EFIMG,
- All other values are RFU.
-
Graphic CSG Type Icon Qualifier
Contents:
The icon qualifier indicates to the ME how the icon shall be used.
Coding:
- '01' = icon is self-explanatory, i.e. if displayed, it replaces the corresponding name in text format.
- '02' = icon is not self-explanatory, i.e. if displayed, it shall be displayed together with the corresponding
name in text format.
- All other values are RFU.
-
Graphic CSG Type Icon Link
Contents:
Link to the icon. This link shall point to a UICC resource.
Coding:
- When the Tag value indicates an URI (i.e. Tag = '80') , the Icon Link shall be encoded to an octet string
according to UTF-8 encoding rules as described in IETF RFC 3629 [48] (e.g.
http://127.0.0.1:3516/pub/files/csgtype.jpg).
- When the Tag value indicates that the Icon Link contains the record number of the corresponding image in
EFIMG (i.e. Tag = '81'), the Icon Link shall be encoded in binary.
Unused bytes shall be set to 'FF'.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
4.4.6.4
154
ETSI TS 131 102 V13.3.0 (2016-04)
EFHNBN (Home NodeB Name)
If service n°86 is "available", this file shall be present.
This EF contains the HNB name. The HNB name is defined in TS 22.220 [54]. HNB name is a common name referring
to HNB/HeNB. The association between a CSG ID and the corresponding HNB name is provided in EFACSGL.
Identifier: '4F83'
SFI: '03'
Record length: X bytes; X ≥ 3
Access Conditions:
READ
UPDATE
ACTIVATE
DEACTIVATE
Bytes
1 to X
Structure: linear fixed
Optional
Update activity: low
PIN
PIN
ADM
ADM
Description
HNB Name TLV object
M/O
M
Length
X bytes
HNB Name tags
Description
Tag Value
'80'
HNB Name Tag
HNB Name information
Description
Value
M/O
HNB Name Tag
'80'
M
Length
K
M
HNB Name
-M
Note 1: The length is coded according to ISO/IEC 8825-1 [35].
-
Length (bytes)
1
Note
K
HNB Name Tag '80'
Contents:
name of the HNB or HeNB.
Coding:
coded using one of the UCS2 code options as defined in TS 31.101 [11].
Unused bytes shall be set to 'FF'.
4.4.6.5
EFOCSGL (Operator CSG Lists)
If service n°90 is "available", this file shall be present.
This EF contains the coding for CSG Ids belonging to the Operator CSG lists. Furthermore, for each CSG ID in the list,
a link to the corresponding HNB name and CSG type may be provided. Within one PLMN the first occurrence of CSG
ID indicates the highest priority CSG ID and the last occurrence indicates the lowest.
NOTE 1: There is no requirement for the ME to take the priority into account.
Additionally, if service n°92 is "available", this EF allows the HPLMN to control, on a per PLMN basis, which
available CSGs are displayed by the ME during a manual CSG selection. If there is no CSG display indicator for a
PLMN, the ME shall display the available CSGs according to the value in EFAD byte 3 bit 2.
NOTE 2: Operators should ensure that all CSG display indicators have the same value if the same PLMN is used in
multiple CSG List TLV objects.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
155
Identifier: '4F84'
SFI: '04'
Record length: Y bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
ETSI TS 131 102 V13.3.0 (2016-04)
Structure: linear fixed
Optional
Update activity: low
PIN
ADM
ADM
ADM
Bytes
Description
M/O
1 to X
Operator CSG List TLV objects
M
Note:
The CSG List in different records may contain the same PLMN
Length
X bytes
The Operator CSG List TLV object shall contain only one PLMN TLV object, Tag '80', and at least one Operator CSG
information TLV, Tag '81'. A record may contain one or more Operator CSG List TLV objects. This means that all
CSG Ids in one Operator CSG List TLV object belong to the same PLMN.
Additionally, the Operator CSG List TLV object may contain one CSG Display Indicator TLV object, if service n°92 is
available.
CSG List Tags
Description
Tag Value
'A0'
Operator CSG List TLV object Tag
CSG List information
Description
Value
CSG List Tag
'A0'
Length
Y
PLMN Tag
'80'
Length
A
PLMN
-CSG Information Tag
'81'
Length
W
CSG Information
CSG Display indicator tag
'82'
Length
Z
CSG Display indicator
Note:
The length is coded according to ISO/IEC 8825-1 [35]
-
M/O
Length (bytes)
M
M
M
M
M
M
M
M
O
O
O
1
Note
1
Note
A
1
Note
W
1
Note
Z
PLMN Tag '80'
Contents:
Mobile Country Code (MCC) followed by the Mobile Network Code (MNC).
Coding:
according to TS 24.008 [47].
-
CSG Information Tag '81'
Tag '81' Coding:
1
CSG Type indication
M
2
HNB Name indication
M
3 to W
CSG ID
M
Note:
The length of the CSG ID is calculated from the TLV object length
-
CSG Type indication
ETSI
1 byte
1 byte
W-2 bytes
3GPP TS 31.102 version 13.3.0 Release 13
156
ETSI TS 131 102 V13.3.0 (2016-04)
Contents:
the CSG Type for the subsequent CSG ID.
Coding:
a value of '00' indicates that the CSG Type is to be taken from other sources (e.g. stored in the nonvolatile memory of the ME). A value in the range '01' to 'FE' indicates the record number in
EFCSGT that shall be displayed as the CSG Type.
-
HNB Name indication
Contents:
the HNB name for the subsequent CSG ID.
Coding:
a value of '00' indicates that the HNB name is to be taken from other sources (e.g. broadcasted by
the Home Node B or stored in the non-volatile memory of the ME). A value in the range '01' to
'FE' indicates the record number in EFHNBN that shall be displayed as the HNB name.
-
CSG ID
Contents:
CSG ID which is part of the allowed CSG list.
Coding:
the CSG ID shall be encoded as defined in TS 23.003 [25]. The CSG ID is coded left justified, i.e.
the most significant bit of the CSG ID is coded on bit 8 of byte 3, over the number of bits as
specified in TS 23.003 [25] using bytes 3 to W. The unused rightmost bits of byte W shall be set 1.
-
CSG display indicator Tag '82':
Coding:
- '00' All available CSG Ids can be displayed during a manual CSG selection
-
'01' Only CSG Ids contained in Operator CSG lists shall be displayed during a manual CSG
selection
Unused bytes shall be set to 'FF'
4.4.6.6
EFOCSGT (Operator CSG Type)
If service n°90 is "available", this file shall be present.
This EF contains the Operator CSG Types. The CSG Type is defined in TS 22.220 [54]. The association between an
Operator CSG ID and the corresponding Operator CSG Type is provided in EFOCSGL. The Operator CSG Type may be
provided in text or in graphic format.
Identifier: '4F85'
SFI: '05'
Record length: X bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
Structure: linear fixed
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
CSG Type TLV objects
ETSI
M/O
M
Length
X bytes
3GPP TS 31.102 version 13.3.0 Release 13
157
ETSI TS 131 102 V13.3.0 (2016-04)
For coding see EFCSGT
4.4.6.7
EFOHNBN (Operator Home NodeB Name)
If service n°90 is "available", this file shall be present.
This EF contains the Operator HNB names. The HNB name is defined in TS 22.220 [54]. HNB Name is a common
name referring to HNB/HeNB. The association between an Operator CSG ID and the corresponding Operator HNB
name is provided in EFOCSGL.
Identifier: '4F86'
SFI: '06'
Record length: X bytes; X ≥ 3
Access Conditions:
READ
UPDATE
ACTIVATE
DEACTIVATE
Bytes
1 to X
Structure: linear fixed
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
HNB Name TLV object
M/O
M
Length
X bytes
For coding see EFHNBN
4.4.7
Void
4.4.8
Contents of files at the DF ProSe level
4.4.8.1
Introduction
This clause describes the additional files that are used for ProSe purposes.
DFProSe shall be present at the ADFUSIM level if service nº101 is "available" in EFUST .
4.4.8.2
EFPROSE_MON (ProSe Monitoring Parameters)
If service n°1 is "available" in the ProSe Service Table, this file shall be present.
This EF contains the authorized PLMNs for restricted ProSe direct discovery for public safety as described in TS
24.334 [70]. This file shall be used only if the ME is authorized as per content of EFAD or received service authorization
from the ProSe Function.
Each record shall be associated with a different PLMN.
Identifier: '4F01'
SFI: '01'
Record size: Z bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to Z
Structure: linear fixed
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
ProSe Discovery monitoring parameters TLV
data object
ProSe Discovery monitoring parameters information
ETSI
M/O
O
Length
Z bytes
3GPP TS 31.102 version 13.3.0 Release 13
158
Description
Value
ETSI TS 131 102 V13.3.0 (2016-04)
M/O/C
ProSe Discovery monitoring parameters
'A0'
TLV
Length
X
PLMN Tag
'80'
Length
L1
PLMN value
-Model Tag
'82'
Length
1
Model value
-Note:
The length is coded according to ISO/IEC 8825-1 [35]
Length (bytes)
M
1
M
M
M
M
O
C
C
Note
1
Note
L1
1
1
1
- PLMN
Contents:
As described in TS 24.333 [71], the PLMN code of the operator in which the UE is authorised to use ProSe
direct discovery monitoring.
Coding:
As defined for the <X>/MonitoringPolicy/<X>/PLMN leaf in TS 24.333 [71].
- Model
Contents:
Model used for the ProSe direct discovery, as described in TS 24.334 [70].
Coding:
b8
b7
b6
b5
b4
b3
b2
b1
b1 indicates if the UE is authorised for Restricted
Model A monitoring policy
b2 indicates if the UE is authorised for Restricted
Model B discoveree policy.
RFU (see TS 31.101 [11])
If the data object is missing, the UE shall behave as if only Restricted Model A monitoring policy is allowed. All
other values are reserved.
Unused bytes shall be set to 'FF'.
4.4.8.3
EFPROSE_ANN (ProSe Announcing Parameters)
If service n°1 is "available" in the ProSe Service Table, this file shall be present.
This EF contains the authorized PLMNs for restricted ProSe direct discovery for public safety, as described in TS
24.334 [70]. This file shall be used only if the ME is authorized as per content of EFAD or received service authorization
from the ProSe Function.
Each record shall be associated with a different PLMN.
Identifier: '4F02'
SFI: '02'
Record size: Z bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to Z
Structure: linear fixed
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
ProSe Discovery announcing parameters TLV
data object
M/O
O
Length
Z bytes
ProSe Discovery announcing parameters information
Description
Value
ETSI
M/O/C
Length (bytes)
3GPP TS 31.102 version 13.3.0 Release 13
159
ETSI TS 131 102 V13.3.0 (2016-04)
ProSe Discovery announcing
'A0'
M
1
parameters TLV
Length
X
M
Note 1
PLMN Tag
'80'
M
1
Length
L1
M
Note 1
PLMN value
-M
L1
Range Tag (Note 3)
'81'
O
1
Length
L2
C
Note 1
Range value
-C
L2
Model Tag
'82'
O
1
Length
1
C
1
Model value
-C
1
Note 1 : The length is coded according to ISO/IEC 8825-1 [35]
Note 2: C; if the Tag is present, this is mandatory.
Note 3: The Range data object is obsolete from Rel-13 onwards and shall be ignored if
present.
- PLMN
Contents:
As described in TS 24.333 [71], the PLMN code of the operator in which the UE is authorised to use ProSe
direct discovery announcing.
Coding:
As defined for the <X>/AnnouncingPolicy/<X>/PLMN leaf in TS 24.333 [71].
- Model
Contents:
Model used for the ProSe direct discovery, as described in TS 24.334 [70].
Coding:
b8
b7
b6
b5
b4
b3
b2
b1
b1 indicates if the UE is authorised for Restricted
Model A announcing policy
b2 indicates if the UE is authorised for Restricted
Model B discoverer policy.
RFU (see TS 31.101 [11])
If the data object is missing, the UE shall behave as if only Restricted Model A announcing policy is allowed. All
other values are reserved.
Unused bytes shall be set to 'FF'.
4.4.8.4
EFPROSEFUNC (HPLMN ProSe Function)
If service n°2 is "available" in the ProSe Service Table, this file shall be present.
This EF contains the IP address of the HPLMN ProSe Function.
NOTE: only usage of the first record is supported in the current release of the specification.
Identifier: '4F03'
SFI: '03'
File size: Z bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to Z
Structure: linear fixed
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
HPLMN ProSe Function Address TLV data
object
HPLMN ProSe Function information
ETSI
M/O
M
Length
Z bytes
3GPP TS 31.102 version 13.3.0 Release 13
160
Description
HPLMN ProSe Function Tag
Length
Address type
HPLMN ProSe Function Address
-
ETSI TS 131 102 V13.3.0 (2016-04)
Value
M/O
Length (bytes)
'80'
A+1
---
M
M
M
M
1
1
1
A
Address type
Contents:
Type of the HPLMN ProSe Function address.
Coding:
A value of '00' indicates FQDN, a value of '01' indicates IPv4, a value of '02' indicates IPv6. All other
values are reserved.
-
HPLMN ProSe Function Address
Contents:
Address of the HPLMN ProSe function.
Coding:
Depending on the Address type. When the HPLMN ProSe Function type is set to '00', the
corresponding HPLMN ProSe Function Address shall be encoded to an octet string according to UTF8 encoding rules as specified in IETF RFC 3629 [48].
Unused bytes shall be set to 'FF'.
4.4.8.5
EFPROSE_RADIO_COM (ProSe Direct Communication Radio Parameters)
If service n°3 is "available" in the ProSe Service Table, this file shall be present.
This EF contains the radio paramenters to be used for ProSe direct communication for public safety when the UE is not
served by E-UTRAN, as described in TS 24.334 [70]. This file shall be used only if the ME is authorized as per content
of EFAD or received service authorization from the ProSe Function.
Identifier: '4F04'
SFI: '04'
File size: Z bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2 to Z + 1
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
ProSe Direct Communication not served by EUTRAN
ProSe Radio parameters TLV data object
The file may contain one or more ProSe Radio parameters TLV data objects.
ProSe Direct Communication not served by E-UTRAN:
ETSI
M/O
M
Length
1 byte
M
Z bytes
3GPP TS 31.102 version 13.3.0 Release 13
161
ETSI TS 131 102 V13.3.0 (2016-04)
Contents:
Indicates if the ME is authorized to perform ProSe Direct Communication and/or one-to-one ProSe direct
communication when not served by E-UTRAN.
Coding:
b8
b7
b6
b5
b4
b3
b2
b1
b1=0 indicates that the UE is not authorised to
perform one-to-many ProSe direct communication when
not served by E-UTRAN
b1=1 indicates that UE is authorised to perform oneto-many ProSe direct communication when not served
by E-UTRAN
b2=0 indicates that the UE is not authorised to
perform one-to-one ProSe direct communication when
not served by E-UTRAN
b2=1 indicates that the UE is authorised to perform
one-to-one ProSe direct communication when not
served by E-UTRAN.
RFU (see TS 31.101 [11])
ProSe Radio parameters information:
Description
Value
M/O/C
ProSe Direct Communication
'A0'
parameters TLV
Length
X
Geographical Area – Polygon Tag
'80'
Length
L1
Geographical Area – Polygon value
-Radio parameters Tag
'81'
Length
L2
Radio parameters value
-Note 1 : The length is coded according to ISO/IEC 8825-1 [35]
Note 2: C; if the Tag is present, this is mandatory.
Length (bytes)
M
1
M
M
M
M
M
M
M
Note 1
1
Note 1
L1
1
Note 1
L2
Each ProSe Radio parameters TLV data object shall contain one or more Geographical Area objects and one Radio
parameters object.
- Geographical Area – Polygon Tag '80'
Contents:
A geographical area defined by a polygon with 3 or more points.
Coding:
1 to 3
Latitude of point 1
M
3 bytes
4 to 6
Longitude of point 1
M
3 bytes
7 to 9
Latitude of point 2
M
3 bytes
10 to 12
Longitude of point 2
M
3 bytes
13 to 15
Latitude of point 3
M
3 bytes
16 to 18
Longitude of point 3
M
3 bytes
:
:
:
:
(6n-5) to 6n-3
Latitude of point n
M
3 bytes
(6n-2) to 6n
Longitude of point n
M
3 bytes
Latitude and longitude are coded as defined in subclause 6.1 of 3GPP TS 23.032 [75].
- Radio parameters Tag '81'
Contents:
The radio parameters used for ProSe Direct Communication
Coding:
Coded as SL-Preconfiguration in 3GPP TS 36.331 [74].
4.4.8.6
EFPROSE_RADIO_MON (ProSe Direct Discovery Monitoring Radio Parameters)
If service n°4 is "available" in the ProSe Service Table, this file shall be present.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
162
ETSI TS 131 102 V13.3.0 (2016-04)
This EF contains the radio paramenters to be used for ProSe direct communication for public safety when the UE is not
served by E-UTRAN, as described in TS 24.334 [70]. This file shall be used only if the ME is authorized as per content
of EFAD or received service authorization from the ProSe Function.
Identifier: '4F05'
SFI: '05'
File size: Z bytes
Structure: transparent
Update activity: low
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2 to Z + 1
Optional
PIN
ADM
ADM
ADM
Description
ProSe Direct Discovery Monitoring not served
by E-UTRAN
ProSe Radio parameters TLV data object
M/O
M
Length
1 byte
M
Z bytes
ProSe Direct Discovery monitoring not served by E-UTRAN:
Contents:
Indicates if the ME is authorized to perform restricted ProSe Direct Discovery monitoring when not served by
E-UTRAN.
Coding:
b8
b7
b6
b5
b4
b3
b2
b1
b1=0 indicates that the UE is not authorised to
perform ProSe direct discovery model A monitoring
when not served by E-UTRAN
b1=1 indicates that the UE is authorised to perform
ProSe direct discovery model A monitoring when not
served by E-UTRAN
b2=0 indicates that the UE is not authorised to
perform ProSe direct discovery model B discoveree
operation when not served by E-UTRAN
b2=1 indicates that the UE is authorised to perform
ProSe direct discovery model B discoveree operation
when not served by E-UTRAN.
RFU (see TS 31.101 [11])
ProSe Radio parameters information
Description
Value
M/O/C
ProSe Radio parameters TLV
'A0'
Length
X
Geographical Area – Polygon Tag
'80'
Length
L1
Geographical Area – Polygon value
-Radio parameters Tag
'81'
Length
L2
Radio parameters value
-Note 1 : The length is coded according to ISO/IEC 8825-1 [35]
Note 2: C; if the Tag is present, this is mandatory.
M
M
M
M
M
M
M
M
Length (bytes)
1
Note 1
1
Note 1
L1
1
Note 1
L2
Each ProSe Radio parameters TLV data object shall contain one or more Geographical Area objects and one Radio
parameters object.
- Geographical Area – Polygon Tag '80'
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
163
ETSI TS 131 102 V13.3.0 (2016-04)
Contents:
A geographical area defined by a polygon with 3 or more points.
Coding:
1 to 3
Latitude of point 1
M
3 bytes
4 to 6
Longitude of point 1
M
3 bytes
7 to 9
Latitude of point 2
M
3 bytes
10 to 12
Longitude of point 2
M
3 bytes
13 to 15
Latitude of point 3
M
3 bytes
16 to 18
Longitude of point 3
M
3 bytes
:
:
:
:
(6n-5) to 6n-3
Latitude of point n
M
3 bytes
(6n-2) to 6n
Longitude of point n
M
3 bytes
Latitude and longitude are coded as defined in subclause 6.1 of 3GPP TS 23.032 [75].
- Radio parameters Tag '81'
Contents:
The radio parameters used for ProSe Direct Communication
Coding:
Coded as SL-Preconfiguration in 3GPP TS 36.331 [74].
4.4.8.7
EFPROSE_RADIO_ANN (ProSe Direct Discovery Announcing Radio Parameters)
If service n°5 is "available" in the ProSe Service Table, this file shall be present.
This EF contains the radio paramenters to be used for ProSe direct communication for public safety when the UE is not
served by E-UTRAN, as described in TS 24.334 [70]. This file shall be used only if the ME is authorized as per content
of EFAD or received service authorization from the ProSe Function.
Identifier: '4F06'
SFI: '06'
File size: Z bytes
Structure: transparent
Update activity: low
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2 to Z + 1
Optional
PIN
ADM
ADM
ADM
Description
ProSe Direct Discovery Announcing not
served by E-UTRAN
ProSe Radio parameters TLV data object
M/O
M
Length
1 byte
M
Z bytes
ProSe Direct Discovery announcing not served by E-UTRAN:
Contents:
Indicates if the ME is authorized to perform restricted ProSe Direct Discovery announcing when not served by
E-UTRAN.
Coding:
b8
b7
b6
b5
b4
b3
b2
b1
b1=0 indicates that the UE is not authorised to
perform ProSe direct discovery model A announcing
when not served by E-UTRAN
b1=1 indicates that the UE is authorised to perform
ProSe direct discovery model A announcing when not
served by E-UTRAN
b2=0 indicates that the UE is not authorised to
perform ProSe direct discovery model B discoverer
operation when not served by E-UTRAN
b2=1 indicates that the UE is authorised to perform
ProSe direct discovery model B discoverer operation
when not served by E-UTRAN.
RFU (see TS 31.101 [11])
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
164
ETSI TS 131 102 V13.3.0 (2016-04)
ProSe Radio parameters information
Description
Value
M/O/C
ProSe Radio parameters TLV
'A0'
Length
X
Geographical Area – Polygon Tag
'80'
Length
L1
Geographical Area – Polygon value
-Radio parameters Tag
'81'
Length
L2
Radio parameters value
-Note 1 : The length is coded according to ISO/IEC 8825-1 [35]
Note 2: C; if the Tag is present, this is mandatory.
M
M
M
M
M
M
M
M
Length (bytes)
1
Note 1
1
Note 1
L1
1
Note 1
L2
Each ProSe Radio parameters TLV data object shall contain one or more Geographical Area objects and one Radio
parameters object.
- Geographical Area – Polygon Tag '80'
Contents:
A geographical area defined by a polygon with 3 or more points.
Coding:
1 to 3
Latitude of point 1
M
3 bytes
4 to 6
Longitude of point 1
M
3 bytes
7 to 9
Latitude of point 2
M
3 bytes
10 to 12
Longitude of point 2
M
3 bytes
13 to 15
Latitude of point 3
M
3 bytes
16 to 18
Longitude of point 3
M
3 bytes
:
:
:
:
(6n-5) to 6n-3
Latitude of point n
M
3 bytes
(6n-2) to 6n
Longitude of point n
M
3 bytes
Latitude and longitude are coded as defined in subclause 6.1 of 3GPP TS 23.032 [75].
- Radio parameters Tag '81'
Contents:
The radio parameters used for ProSe Direct Communication
Coding:
Coded as SL-Preconfiguration in 3GPP TS 36.331 [74].
4.4.8.8
EFPROSE_POLICY (ProSe Policy Parameters)
If service n°6 is "available" in the ProSe Service Table, this file shall be present.
This EF contains the policy paramenters to be used for ProSe direct communication for public safety, as described in TS
24.334 [70]. This file shall be used only if the ME is authorized as per content of EFAD or received service authorization
from the ProSe Function.
Each record shall be associated with a different ProSe group.
Identifier: '4F07'
SFI: '07'
Record size: Z bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to Z
Structure: linear fixed
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
ProSe Policy parameters TLV data object
ProSe Policy parameters information:
ETSI
M/O
M
Length
Z bytes
3GPP TS 31.102 version 13.3.0 Release 13
Description
165
Value
ProSe Policy parameters Tag
'A0'
Length
X
ProSe Layer-2 Group ID tag
'80'
Length
3
ProSe Layer-2 Group ID
-ProSe UE ID tag
'81'
Length
3
ProSe UE ID
-ProSe Group IP multicast address tag
'82'
Length
A
ProSe Group IP multicast address
-Address type tag
'83'
Length
1
Address type
-IPv4 address as source tag
'84'
Length
4
IPv4 address as source
-Group related security tag
'85'
Length
B
Group related security contents
-Application Layer Group ID tag
'86'
Length
C
Application Layer Group ID
-Note:
The length is coded according to ISO/IEC 8825-1 [35]
-
ETSI TS 131 102 V13.3.0 (2016-04)
M/O
Length (bytes)
M
M
M
M
M
M
M
M
M
M
M
M
M
M
O
C
C
M
M
M
O
C
C
1
Note
1
1
3
1
1
3
1
1
A
1
1
1
1
1
4
1
Note
B
1
Note
C
ProSe Layer-2 Group ID tag '80'
Contents:
Contains the ProSe Layer-2 Group ID, as defined in TS 23.303 [73]
Coding:
As per TS 33.303 [72]
-
ProSe UE ID tag '81'
Contents:
Contains the ProSe UE ID, equivalent to the layer-2 source address of the sending UE, as defined in
TS 23.303 [73]
Coding:
As per TS 33.303 [72]
-
ProSe Group IP multicast address tag '82'
Contents:
IPv4 or IPv6 group IP multicast addressed to be used for ProSe direct communication associated with
the corresponding layer-2 group ID.
Coding:
Depending on the Address type
-
Address type tag '83'
Contents:
Type of IP address.
Coding:
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
166
ETSI TS 131 102 V13.3.0 (2016-04)
A value of '01' indicates IPv4, a value of '02' indicates IPv6. All other values are reserved.
-
IPv4 address as source tag '84'
Contents:
IPv4 addressed to be used as source, in case of IPv4 address. This TLV shall be ignored if address
type is different from IPv4.
Coding:
IPv4 address
-
Group related security tag '85'
Contents:
Parameters related to the group security.
Coding:
1 to 32
33
34
35 to B
-
PGK as defined in TS 33.303 [72]
PGK Id as defined in TS 33.303 [72].
Algorithm Info as defined in TS 33.303 [72]
RFU
M
M
M
O
32 bytes
1 byte
1 byte
(B-34) bytes
Application Layer Group ID '86'
Contents:
Application layer group that the UE belongs to.
Coding:
As per TS 23.303 [73]
Unused bytes shall be set to 'FF'.
4.4.8.9
EFPROSE_PLMN (ProSe PLMN Parameters)
If service n°3 is "available" in the ProSe Service Table, this file shall be present.
This EF contains the authorized PLMNs for ProSe direct communication for public safety, as described in TS 24.334
[70]. This file shall be used only if the ME is authorized as per content of EFAD or received service authorization from
the ProSe Function.
Each record shall be associated with a different PLMN.
Identifier: '4F08'
SFI: '08'
Record size: Z bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to Z
Structure: linear fixed
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
ProSe PLMN parameters TLV data object
M/O
O
Length
Z bytes
ProSe Policy parameters information:
Description
Value
ETSI
M/O
Length (bytes)
3GPP TS 31.102 version 13.3.0 Release 13
167
ETSI TS 131 102 V13.3.0 (2016-04)
ProSe PLMN parameters Tag
'A0'
Length
X
PLMN tag
'80'
Length
3
PLMN
-Direct communication authorisation tag
'81'
Length
1
Direct communication authorisation
-NOTE:
The length is coded according to ISO/IEC 8825-1 [35]
-
M
M
M
M
M
O
C
C
1
Note
1
1
3
1
1
1
PLMN tag '80'
Contents:
Contains the PLMNs in which the UE is authorised to perform ProSe direct communication when
served by E-UTRAN
Coding:
According to TS 24.008 [9].
-
Direct communication authorisation tag '81'
Contents:
Indicates if the UE is authorised to use one-to-one and/or one-to-many ProSe direct communication.
Coding:
b8
b7
b6
b5
b4
b3
b2
b1
b1 indicates if the UE is authorised for one-to-many
ProSe direct communication
b2 indicates if the UE is authorised for one-to-one
ProSe direct communication.
RFU (see TS 31.101 [11])
If the data object is missing, the UE shall behave as if only one-to-many ProSe direct communication
is authorized in the PLMN. All other values are reserved.
Unused bytes shall be set to 'FF'.
4.4.8.10
EFPROSE_GC (ProSe Group Counter)
If service n°7 is "available" in the ProSe Service Table, this file shall be present.
This EF contains the PTK ID and Counter associated with the PGK currently in use for a ProSe Group.
Identifier: '4F09'
SFI: '09'
File size: X >= 9 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to L
L+1 to 2xL
:
Structure: Transparent
Optional
Update activity: high
PIN
PIN
ADM
ADM
Description
ProSe Group Counter data object
ProSe Group Counter data object
:
M/O
O
O
:
Length
L bytes
L bytes
:
ProSe Group Counter:
Description
Value
ETSI
M/O
Length (bytes)
3GPP TS 31.102 version 13.3.0 Release 13
168
ETSI TS 131 102 V13.3.0 (2016-04)
ProSe Group Counter Tag
'80'
Length
X >= 7
ProSe Layer-2 Group ID
-PTK ID
-Counter
-RFU
-Note:
The length is coded according to ISO/IEC 8825-1 [35]
M
M
M
M
M
O
1
Note
3
2
2
X
-
ProSe Layer-2 Group ID
Contents:
Contains the ProSe Layer-2 Group ID, as defined in TS 23.303 [73]
Coding:
As per TS 33.303 [72]
-
PTK ID
Contents:
Contains the PTK value, as defined in TS 33.303 [72]
Coding:
As per TS 33.303 [72]
-
Counter
Contents:
Contains the Counter for the PGK used in the group, as defined in TS 33.303 [72]
Coding:
As per TS 33.303 [72]
Unused bytes shall be set to 'FF'.
4.4.8.11
EFPST (ProSe Service Table)
If service n°101 is "available" in the USIM Service Table, this file shall be present. This EF indicates which ProSe
services are available. If a service is not indicated as available in the ProSe Service Table, the ME shall not select this
service.
Identifier: '4F10'
SFI: '10'
File size: X bytes, (X ≥ 1)
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2
etc.
X
-Services
Contents:
Structure: transparent
Update activity: low
PIN
ADM
ADM
ADM
Description
Services n°1 to n°8
Services n°9 to n°16
Services n°(8X-7) to n°(8X)
Service n°1:
Service n°2:
Service n°3:
Service n°4:
Service n°5:
Service n°6:
Service n°7:
Service n°8:
Service n°9:
Service n°10
Service n°11
Optional
M/O
M
O
Length
1 byte
1 byte
O
1 byte
ProSe direct discovery parameters
HPLMN ProSe Function
ProSe Direct Communication radio parameters
ProSe Direct Discovery monitoring radio parameters
ProSe Direct Discovery announcing radio parameters
ProSe policy parameters
ProSe group counter
ProSe Usage Information Reporting configuration
UICC ProSe Direct Communication usage information reporting
ProSe Group Member Discovery parameters
ProSe Relay parameters
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
169
ETSI TS 131 102 V13.3.0 (2016-04)
The EF shall contain at least one byte. Further bytes may be included, but if the EF includes an optional byte, then it is
mandatory for the EF to also contain all bytes before that byte. Other services are possible in the future and will be
coded on further bytes in the EF.
If service n°9 is "available", then service n°8 shall also be "available".
If service n°10 is "available", then service n°1 shall also be "available".
Coding:
Same as coding of USIM Service Table
4.4.8.12
EFPROSE_UIRC (ProSe UsageInformationReportingConfiguration)
If service n°8 is "available" in the ProSe Service Table, this file shall be present.
This EF contains the description of the configuration to be used by the UE for reporting the usage information for direct
communication for public safety, as described in TS 24.334 [70] and TS 32.277 [77]. This file shall be used only if the
UE is authorized for direct communication as per content of EFAD or received service authorization from the ProSe
Function.
Identifier: '4F11'
SFI: '11'
File size: Z bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to Z
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
ProSe
UsageInformationReportingConfiguration TLV
data objects
ETSI
M/O
M
Length
Z bytes
3GPP TS 31.102 version 13.3.0 Release 13
170
ETSI TS 131 102 V13.3.0 (2016-04)
ProSe UsageInformationReportingConfiguration parameters information:
Description
Value
ProSe ServerAddress tag
'80'
Length
A
ProSe ServerAddress
-ProSe CollectionPeriod tag
'81'
Length
3
ProSe CollectionPeriod
-ProSe ReportingWindow tag
'82'
Length
3
ProSe ReportingWindow
-ProSe ReportGroupParameters tag
'83'
Length
1
ProSe ReportGroupParameters
-ProSe
'84'
ReportTimeStampsFirstTransmissionAn
dReception tag
Length
1
ProSe
-ReportTimeStampsFirstTransmissionAn
dReception
ProSe ReportDataTransmitted tag
'85'
Length
1
ProSe ReportDataTransmitted
-ProSe ReportDataReceived tag
'86'
Length
1
ProSe ReportDataReceived
-ProSe
'87'
ReportTimeStampsOutOfCoverage tag
Length
1
ProSe
-ReportTimeStampsOutOfCoverage
ProSe ReportLocationInCoverage tag
'88'
Length
1
ProSe ReportLocationInCoverage
-ProSe ReportRadioParameters tag
'89'
Length
1
ProSe ReportRadioParameters
-NOTE:
The length is coded according to ISO/IEC 8825-1 [35]
M/O
Length (bytes)
C
C
C
M
M
M
M
M
M
O
O
O
O
1
Note
A
1
1
3
1
1
3
1
1
1
1
O
O
1
1
O
O
O
O
O
O
O
1
1
1
1
1
1
1
O
O
1
1
O
O
O
O
O
O
1
1
1
1
1
1
- ProSe ServerAddress
Contents:
As described in TS 24.333 [71], used to determine the IPv4 or IPv6 address the UE or the USIM shall use to
send the usage report to. If no server address is provided, the UE shall upload the usage information reports to
the IP address of the HPLMN ProSe Function. If the USIM supports storage of the usage information, the server
address is mandatory.
Coding:
As defined for the ProSe ServerAddress leaf in TS 24.333 [71].
- ProSe CollectionPeriod
Contents:
As described in TS 24.333 [71], contains the time interval, in unit of minutes, at which the UE shall generate the
usage information reports. Setting the CollectionPeriod to a value of 0 disables generation of usage information
reports at the UE.
Coding:
As defined for the ProSe CollectionPeriod leaf in TS 24.333 [71].
- ProSe ReportingWindow
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
171
ETSI TS 131 102 V13.3.0 (2016-04)
Contents:
As described in TS 24.333 [71], contains the time window, in units of minutes, during which the UE shall upload
the usage information report to the server. Setting the ReportingWindow to a value of 0 disables upload of the
usage information reports by the UE.
Coding:
As defined for the ProSe ReportingWindow leaf in TS 24.333 [71].
- ProSe ReportGroupParameters
Contents:
As described in TS 24.333 [71], indicates whether or not the UE shall report the group parameters for one-tomany ProSe direct communication in the usage information. The default value 0 applies if this TLV is not
provisioned.
Coding:
As defined for the ProSe ReportGroupParameters leaf in TS 24.333 [71].
- ProSe ReportTimeStampsFirstTransmissionAndReception
Contents:
As described in TS 24.333 [71], indicates whether or not the UE shall report the time stamps of the first
transmission/reception during the collection period in the usage information. The default value 0 applies if this
TLV is not provisioned
Coding:
As defined for the ProSe ReportTimeStampsFirstTransmissionAndReception leaf in TS 24.333 [71].
- ProSe ReportDataTransmitted
Contents:
As described in TS 24.333 [71], indicates whether or not the UE shall report the amount of data transmitted
during the collection period in the usage information, and whether with location information. The default value 1
applies if this TLV is not provisioned
Coding:
As defined for the ProSe ReportDataTransmitted leaf in TS 24.333 [71].
- ProSe ReportDataReceived
Contents:
As described in TS 24.333 [71], indicates whether or not the UE shall report the amount of data received during
the collection period in the usage information, and whether with location information. The default value 1
applies if this TLV is not provisioned
Coding:
As defined for the ProSe ReportDataReceived leaf in TS 24.333 [71].
- ProSe ReportTimeStampsOutOfCoverage
Contents:
As described in TS 24.333 [71], indicates whether or not the UE shall report the time stamps when it went in and
out of E-UTRAN coverage during the collection period in the usage information. The default value 0 applies if
this TLV is not provisioned
Coding:
As defined for the ProSe ReportTimeStampsOutOfCoverage leaf in TS 24.333 [71].
- ProSe ReportLocationInCoverage
Contents:
As described in TS 24.333 [71], indicates whether or not the UE shall report the list of locations of the UE when
in E-UTRAN coverage during the collection period in the usage information.
Coding:
As defined for the ProSe ReportLocationInCoverage leaf in TS 24.333 [71].
- ProSe ReportRadioParameters
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
172
ETSI TS 131 102 V13.3.0 (2016-04)
Contents:
As described in TS 24.333 [71], indicates whether or not the UE shall report the radio parameters used for ProSe
direct communication (i.e. indicator of which radio resources used and radio frequency used) during the
reporting period in the usage information.
Coding:
As defined for the ProSe ReportRadioParameters leaf in TS 24.333 [71].
4.4.8.12
EFPROSE_GM_DISCOVERY (ProSe Group Member Discovery Parameters)
If service n°10 is "available" in the ProSe Service Table, this file shall be present.
This EF contains the ProSe discovery parameters for public safety, as described in TS 24.334 [70]. This file shall be
used only if the ME is authorized as per content of EFAD or received service authorization from the ProSe Function.
Identifier: '4F12'
SFI: '12'
Record size: Z bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to Y
Structure: linear fixed
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
Group member discovery parameters TLV
data object
M/O
O
Length
Y bytes
Group member discovery parameters information:
Description
Value
Group member discovery parameters
'A0'
Tag
Length
X
User Info ID tag
'80'
Length
6
User Info ID
-Discovery Group ID tag
'81'
Length
3
Discovery Group ID
-Application Layer Group ID tag
'82'
Length
Y
Application Layer Group ID
-NOTE:
The length is coded according to ISO/IEC 8825-1 [35]
M/O
Length (bytes)
M
1
M
M
M
M
M
M
M
M
M
M
Note
1
1
6
1
1
3
1
Note
Y
Each record shall contain at most one Group member discovery parameters information.
-
User Info ID tag '80'
Contents:
Indicates the user information which is sent by the announcing or discoverer or discoveree UE over
the air during Group Member Discovery procedures.
Coding:
As defined in TS 24.334 [70].
-
Discovery Group ID tag '81'
Contents:
Indicates the group ID of the discovery group that the UE belongs to when group member discovery
is performed.
Coding:
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
173
ETSI TS 131 102 V13.3.0 (2016-04)
As defined in TS 24.334 [70].
-
Application Layer Group ID tag '82'
Contents:
Indicates the Application Layer Group ID identifying an application layer group that the UE belongs
to.
Coding:
As per TS 23.303 [73]
Unused bytes shall be set to 'FF'.
4.4.8.13
EFPROSE_RELAY (ProSe Relay Parameters)
If service n°11 is "available" in the ProSe Service Table, this file shall be present.
This EF contains the authorized PLMNs for ProSe UE-to-network relay for public safety, as described in TS 24.334
[70]. This file shall be used only if the ME is authorized as per content of EFAD or received service authorization from
the ProSe Function.
Each record shall be associated with a different PLMN.
Identifier: '4F13'
SFI: '13'
Record size: Z bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to Z
Structure: linear fixed
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
ProSe Relay parameters TLV data object
M/O
O
Length
Z bytes
ProSe Relay parameters information:
Description
Value
ProSe Relay parameters Tag
'A0'
Length
X
PLMN tag
'80'
Length
3
PLMN
-Relay type tag
'81'
Length
1
Relay type
-NOTE:
The length is coded according to ISO/IEC 8825-1 [35]
-
M/O
Length (bytes)
M
M
M
M
M
M
M
M
1
Note
1
1
3
1
1
1
PLMN tag '80'
Contents:
Contains the PLMNs in which the UE is authorised to act as a ProSe UE-to-network relay and/or use
a ProSe UE-to-network relay.
Coding:
According to TS 24.008 [9].
-
Relay type tag '81'
Contents:
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
174
ETSI TS 131 102 V13.3.0 (2016-04)
Indicates if the UE is authorized to act as a ProSe UE-to-network relay and/or use a ProSe UE-tonetwork relay.
Coding:
b8
b7
b6
b5
b4
b3
b2
b1
b1=0 indicates that the UE is not authorised to
as a ProSe UE-to-network relay.
b1=1 indicates that the UE is authorised to act
ProSe UE-to-network relay.
b2=0 indicates that the UE is not authorised to
a ProSe UE-to-network relay.
b2=1 indicates that the UE is authorised to use
ProSe UE-to-network relay.
RFU (see TS 31.101 [11])
act
as a
use
a
Unused bytes shall be set to 'FF'.
4.4.8.14
EFPROSE_RELAY_DISCOVERY (ProSe Relay Discovery Parameters)
If service n°11 is "available" in the ProSe Service Table, this file shall be present.
This EF contains the ProSe direct discovery parameters when it is used for ProSe UE-to-network relay discovery for
public safety, as described in TS 24.334 [70]. This file shall be used only if the ME is authorized as per content of EFAD
or received service authorization from the ProSe Function.
Identifier: '4F14'
SFI: '14'
File size: Z bytes (Z > 5 bytes)
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to 6
---
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
User Info ID
Remote UE parameters TLV data object
Relay parameters TLV data object
M/O
M
O
O
Length
6 bytes
X bytes
Y bytes
User Info ID
Contents:
Indicates the user information which is sent by the announcing or discoverer or discoveree UE over the air during
Group Member Discovery procedures.
Coding:
As defined in TS 24.334 [70].
Remote UE parameters information:
The EF can contain multiple Remote UE parameters data objects.
Description
Value
ETSI
M/O
Length (bytes)
3GPP TS 31.102 version 13.3.0 Release 13
175
Remote UE parameters Tag
'A0'
Length
X
Relay Service Code tag
'80'
Length
3
Relay Service Code
-User Info ID of Relay tag
'81'
Length
6
User Info ID of Relay
-IP Versions tag
'82'
Length
1
IP Versions
-Security content tag
'83'
Length
Y
Security content
-NOTE:
The length is coded according to ISO/IEC 8825-1 [35]
-
ETSI TS 131 102 V13.3.0 (2016-04)
M
M
M
M
M
O
C
C
M
M
M
M
M
M
1
Note
1
1
3
1
1
6
1
1
1
1
Note
Y
Relay Service Code tag '80'
Contents:
Indicates the connectivity service that the ProSe UE-to-network relay provides to public safety
applications.
Coding:
As defined in TS 24.334 [70].
-
User Info ID of Relay tag '81'
Contents:
Indicates the user information of the ProSe UE-to-network relay that the remote UE seeks to discover
during ProSe UE-to-network relay discovery procedures.
Coding:
As defined in TS 24.334 [70].
-
IP Versions tag '82'
Contents:
Indicates the IP version(s) that the remote UE can use for the relay traffic associated with the Relay
Service Code.
Coding:
A value of '01' indicates IPv4, a value of '02' indicates IPv6, a value of '03' indicates IPv4v6. All other
values are reserved.
-
Security Content tag '83'
Editor"s note: The values of the SecurityContent node are to be decided based on SA3 specification.
Relay parameters information:
The EF can contain multiple Relay parameters data objects.
Description
Value
ETSI
M/O
Length (bytes)
3GPP TS 31.102 version 13.3.0 Release 13
176
Relay parameters Tag
'A1'
Length
X
Relay Service Code tag
'80'
Length
3
Relay Service Code
-PDN type tag
'81'
Length
1
PDN type
-APN tag
'82'
Length
3
APN
-ProSe Relay UE ID tag
'83'
Length
3
ProSe Relay UE ID
-Security content tag
'84'
Length
Y
Security content
-NOTE:
The length is coded according to ISO/IEC 8825-1 [35]
-
ETSI TS 131 102 V13.3.0 (2016-04)
M
M
M
M
M
O
C
C
O
C
C
M
M
M
M
M
M
1
Note
1
1
3
1
1
1
1
1
3
1
1
3
1
Note
Y
Relay Service Code tag '80'
Contents:
Indicates the connectivity service that the ProSe UE-to-network relay provides to public safety
applications.
Coding:
As defined in TS 24.334 [70].
-
PDN type tag '81'
Contents:
Indicates the IP version of the PDN connection to be used for the relayed traffic associated with a
Relay Service Code.
Coding:
A value of '01' indicates IPv4, a value of '02' indicates IPv6. All other values are reserved.
-
APN tag '82'
Contents:
Indicates the PDN connection that the ProSe UE-to-network relay uses for the relayed traffic
associated with a Relay Service Code. If this TLV is missing, then the default APN is used for the
PDN connectivity.
Coding:
A network access point name
-
ProSe Relay UE ID tag '83'
Contents:
Indicates the link layer identifier used for direct communication associated with a Relay Service
Code.
Coding:
As defined in TS 24.334 [70].
-
Security Content tag '84'
Editor"s note: The values of the SecurityContent node are to be decided based on SA3 specification.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
177
ETSI TS 131 102 V13.3.0 (2016-04)
Unused bytes shall be set to 'FF'.
4.4.9
4.4.9.1
Contents of files at the DF ACDC level
Introduction
This clause describes the additional files that are used for ACDC configuration.
DFACDC shall be present at the ADFUSIM level if service nº108 is "available" in EFUST (USIM Service Table).
4.4.9.2
EFACDC_LIST (ACDC List)
If service n°108 is "available", this file shall be present.
This EF contains the link to EFs containing the ACDC for each operating system identifier. The ME parses the content
of the EFACDC_LIST and retrieves the file id and optionally the SFI to further access the relevant ACDC configuration.
Identifier: '4F01'
SFI: '01'
File size: Z bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to L1
L1+1 to L1+L2
:
L1+L2+...+L(n1)+1 to
L1+L2+...+Ln
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
ACDC OS TLV data object 1
ACDC OS TLV data object 2
:
ACDC OS TLV data object n
M/O
M
O
:
O
Length
L1 bytes
L2 bytes
:
Ln bytes
ACDC OS TLV data object
Description
Value
M/O/C
ACDC OS tag
'A0'
Length
X+19
OS Id
-File Id
-SFI
-RFU
-Note:
The length is coded according to ISO/IEC 8825-1 [35]
M
M
M
M
M
O
- OS Id
Contents:
The Operating System identifier
Coding:
A Universally Unique IDentifier (UUID) as specified in IETF RFC 4122 [80].
- File Id
Contents:
File Id of the EF containing the ACDC configuration for the Operating System
Coding:
According to TS 31.101 [11]
- SFI
ETSI
Length (bytes)
1
Note
16
2
1
X
3GPP TS 31.102 version 13.3.0 Release 13
178
ETSI TS 131 102 V13.3.0 (2016-04)
Contents:
Short File Identifier of the EF containing configuration for the Operating System
Coding:
According to TS 31.101 [11]. The value '0' indicates that SFI is not allocated for the file.
Unused bytes shall be set to 'FF'.
4.4.9.3
EFACDC_OS_CONFIG (ACDC OS configuration)
This EF contains the ACDC configuration for a specific Operating System. The ME retrieves ths file id or the SFI of the
file from the EFACDC_LIST.
Identifier: '4FXX'
SFI: 'XX' (optional)
File size: Z bytes
Structure: transparent
Update activity: low
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to L1
L1+1 to L1+L2
L1+L2+...+L(n1)+1 to
L1+L2+...+Ln
Optional
PIN
ADM
ADM
ADM
Description
M/O
M
O
:
O
ACDC App Id 1
ACDC App Id 2
:
ACDC App Id n
Length
L1 bytes
L2 bytes
:
Ln bytes
ACDC App Id
Description
Value
M/O/C
ACDC App Id tag
'A0'
Length
X
ACDC category tag
'80'
Length
1
ACDC category
-OS App Id tag
'81'
Length
L
OS App Id
-Note:
The length is coded according to ISO/IEC 8825-1 [35]
M
M
M
M
M
M
M
M
Length (bytes)
1
Note
1
1
1
1
Note
L
- ACDC category
Contents:
The ACDC category indicates the category to which the identified application belongs.
Coding:
As the ACDCCategory leaf in 24.105 [81]
- OS App Id
Contents:
indicates an OS specific application identifier
Coding:
As the OSAppId leaf in 24.105 [81]
Unused bytes shall be set to 'FF'.
4.5
Contents of Efs at the TELECOM level
The Efs in the Dedicated File DFTELECOM contain service related information.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
4.5.1
179
ETSI TS 131 102 V13.3.0 (2016-04)
EFADN (Abbreviated dialling numbers)
In case of a present GSM application on the UICC the first EFADN (i.e. reflected by the first record in EFPBR) of the
DFPHONEBOOK is mapped (with an identifier equal to '6F3A') to DFTELECOM to ensure backwards compatibility.
A 3G ME shall not access this file. The information is accessible for a 3G ME in EFADN under DFPHONEBOOK.
4.5.2
EFEXT1 (Extension1)
In case of a present GSM application on the UICC the first EFEXT1 (i.e. reflected by the first record in EFPBR) of the
DFPHONEBOOK is mapped (with an identifier equal to '6F4A') to DFTELECOM to ensure backwards compatibility.
A 3G ME shall not access this file. The information is accessible for a 3G ME in EFEXT1 under DFPHONEBOOK.
4.5.3
EFECCP (Extended Capability Configuration Parameter)
In case of a present GSM application on the UICC the first EFCCP1 (i.e. reflected by the first record in EFPBR) of the
DFPHONEBOOK is mapped (with an identifier equal to '6F4F') to DFTELECOM to ensure backwards compatibility. There shall
not be any EFCCP (with a file-id of '6F3D') under DFTELECOM because otherwise a GSM terminal could create
inconsistencies within the phonebook.
A 3G ME shall not access this file. The information is accessible for a 3G ME in EFCCP1 under DFPHONEBOOK.
4.5.4
EFSUME (SetUpMenu Elements)
This File is defined in ETSI TS 102 222 [39], and has the file identifier '6F54'.
4.5.5
EFARR (Access Rule Reference)
This EF contains the access rules for files located under the DFTELECOM in the UICC. If the security attribute tag '8B' is
indicated in the FCP it contains a reference to a record in this file.
Structure of EFARR at DFTelecom-level
Identifier: '6F06'
Record length: X bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
Structure: Linear fixed
Mandatory
Update activity: low
ALW
ADM
ADM
ADM
Description
Access Rule TLV data objects
M/O
M
Length
X bytes
This EF contains one or more records containing access rule information according to the reference to expanded format
as defined in ISO/IEC 7816-4 [20]. Each record represents an access rule. Unused bytes in the record are set to 'FF'.
If the card cannot access EFARR, any attempt to access a file with access rules indicated in this EFARR shall not be
granted.
4.5.6
EFICE_DN (In Case of Emergency – Dialling Number)
This EF contains one or more records containing number formatted ICE information, according to TS 22.101 [24].
This file shall be deactivated if the user does not wish the ICE information contained in this file to be available and
activated if the user wishes the ICE information in this file to be available.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
180
ETSI TS 131 102 V13.3.0 (2016-04)
Structure of EFICE_DN at DFTelecom-level
Identifier: '6FE0'
Structure: Linear fixed
Optional
SFI: Optional
Record length: X+14 bytes
Update activity: low
Access Conditions:
READ
ALWAYS
UPDATE
PIN
DEACTIVATE
PIN or Issuer Specified PIN (see Note)
ACTIVATE
PIN or Issuer Specified PIN (see Note)
Bytes
Description
M/O
Length
1 to X
Alpha Identifier
O
X bytes
X+1
Length of BCD number/SSC contents
M
1 byte
X+2
TON and NPI
M
1 byte
X+3 to X+12 Dialling Number/SSC String
M
10 bytes
X+13
Capability/Configuration1 Record Identifier
M
1 byte
X+14
Extension1 Record Identifier
M
1 byte
Note: The Issuer Specified PIN is a PIN with a global key reference (see TS 31.101 [11])
specified by the card Issuer.
Coding:
As for EFADN
4.5.7
EFICE_FF (In Case of Emergency – Free Format)
This EF contains one or more records containing free formatted ICE information, according to TS 22.101 [24].
This file shall be deactivated if the user does not wish the ICE information contained in this file to be available and
activated if the user wishes the ICE information in this file to be available.
Structure of EFICE_FF at DFTelecom-level
Identifier: '6FE1'
Structure: Linear fixed
Optional
SFI: Optional
Record length: >=X+Y bytes
Update activity: low
Access Conditions:
READ
ALWAYS
UPDATE
PIN
DEACTIVATE
PIN or Issuer Specified PIN (see Note)
ACTIVATE
PIN or Issuer Specified PIN (see Note)
Bytes
Description
M/O
Length
1 to X
ICE Free Format Label TLV
M
X bytes
X+1 to X+Y
ICE Free Format Content TLV
M
Y bytes
Note: The Issuer Specified PIN is a PIN with a global key reference (see TS 31.101 [11])
specified by the card Issuer.
- ICE Free Format Label TLV
Contents:
This TLV contains a label that summarises the type of content that is contained in the associated ICE Free
Format Content TLV (e.g. "medical alert information").
Coding:
ICE Free Format Label TLV is coded as follows:
Tag value is '80'
Length is coded according to ISO/IEC 8825-1 [35].
Value is as for value part of the text string TLV in 3GPP TS 31.111 [12]. If the length is 0 and there is
no value part then the terminal shall interpret this as no label is used.
- ICE Free Format Content TLV
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
181
ETSI TS 131 102 V13.3.0 (2016-04)
Contents:
This TLV contains a ICE Free Format Content (e.g. "Allergy to work").
Coding:
ICE Free Format Content TLV is coded as follows:
Tag value is '81'
Length is coded according to ISO/IEC 8825-1 [35].
Value is as for value part of the text string TLV in 3GPP TS 31.111 [12]. If the length is 0 and there is
no value part then the terminal shall interpret this as no label is used.
Padding: unused bytes in each record shall be set to 'FF'.
4.5.8
EFRMA (Remote Management Actions)
This File is defined in ETSI TS 102 222 [39], and has the file identifier '6F53'.
4.5.9
EFPSISMSC (Public Service Identity of the SM-SC)
This file shall be present if and only if service n°12 and n°91 are "available".
This EF contains the Public Service Identity of the SM-SC (either a SIP URI or tel URI) that the ME shall use to submit
SMS over IP as defined in 24.341 [55].
Identifier: '6FE5'
File size: X bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
-
Structure: linear fixed
Optional
Update activity: low
PIN
PIN
ADM
ADM
Description
URI TLV data object
M/O
M
Length
X bytes
URI
Contents:
-
SIP URI or tel URI of the Public Service Identity of the SM-SC.
Coding:
-
4.6
For contents and syntax of URI TLV data object values see IETF RFC 3261 [56]. The URI shall be encoded
to an octet string according to UTF-8 encoding rules as specified in IETF RFC 3629 [57]. The tag value of
the URI TLV data object shall be '80'.
Contents of DFs at the TELECOM level
DFs may be present as child directories of DFTELECOM. The following DFs have been defined:
-
DFGRAPHICS
'5F50'.
-
DFPHONEBOOK
'5F3A'.
(DF for public phone book. This DF has the same structure as DFPHONEBOOK under ADF USIM).
-
DFMULTIMEDIA
'5F3B'.
-
DFMMSS
'5F3C'
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
182
ETSI TS 131 102 V13.3.0 (2016-04)
(The contents of DF for MMSS are defined in C.S0074-A [53]. This DF for MMSS is not applicable to 3GPP only
terminals).
-
DFMCPTT
4.6.1
'5F3D'.
Contents of files at the DFGRAPHICS level
The Efs in the Dedicated File DFGRAPHICS contain graphical information.
4.6.1.1
EFIMG (Image)
Each record of this EF identifies instances of one particular graphical image, which graphical image is identified by this
EF's record number.
Image instances may differ as to their size, having different resolutions, and the way they are coded, using one of
several image coding schemes.
As an example, image k may represent a company logo, of which there are i instances in the UICC, of various
resolutions and perhaps encoded in several image coding schemes. Then, the i instances of the company's logo are
described in record k of this EF.
Identifier: '4F20'
Structure: linear fixed
Optional
Record length: 9n+1 or 9n+2 bytes, (n ≥ 1)
Update activity: low
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
2 to 10
11 to 19
:
9(n-1)+2 to 9n+1
9n + 2
-
PIN
ADM
ADM
ADM
Description
Number of Actual Image Instances
Descriptor of Image Instance 1
Descriptor of Image Instance 2
:
Descriptor of Image Instance n
RFU (see TS 31.101 [11])
M/O
M
M
O
:
O
O
Length
1 byte
9 bytes
9 bytes
:
9 bytes
1 byte
Number of Actual Image Instances.
Contents:
- this byte gives the number of actual image instances described in the following data items (i.e. unused descriptors
are not counted).
Coding:
- binary.
-
Image Instance Descriptor
Contents:
- a description of an image instance.
Coding:
- Byte 1: Image Instance Width
Contents:
- this byte specifies the image instance width, expressed in raster image points.
Coding:
- binary.
Byte 2: Image Instance Height.
Contents:
- this byte specifies the image instance height, expressed in raster image points.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
183
ETSI TS 131 102 V13.3.0 (2016-04)
Coding:
- binary.
Byte 3: Image Coding Scheme.
Contents:
- this byte identifies the image coding scheme that has been used in encoding the image instance.
Coding:
- '11' - basic image coding scheme as defined in annex B;
- '21' - colour image coding scheme as defined in annex B;
- '22' - colour image coding scheme with transparency as defined in annex B;
other values are reserved for future use.
Bytes 4 and 5: Image Instance Data File Identifier.
Contents:
- these bytes identify an EF which is the image instance data file (see clause 4.6.1.2), holding the actual image data
for this particular instance.
Coding:
- byte 4: high byte of Image Instance Data File Identifier;
- byte 5: low byte of Image Instance Data File Identifier.
Bytes 6 and 7: Offset into Image Instance Data File.
Contents:
- these bytes specify an offset into the transparent Image Instance Data File identified in bytes 4 and 5. The data for
this image instance is found starting at this offset in the Image Instance Data File.
Coding:
- byte 6: high byte of offset into Image Instance Data File;
byte 7: low byte of offset into Image Instance Data File.
Bytes 8 and 9: Length of Image Instance Data.
Contents:
- these bytes yield the length of the image instance data, starting at the offset identified in bytes 6 and 7. For the
colour image coding scheme, as defined in annex B, the length of image instance data excludes the CLUT.
Coding:
- byte 8: high byte of Image Instance Data length;
- byte 9: low byte of Image Instance Data length.
NOTE:
4.6.1.2
Transparent image instance data longer than 256 bytes may be read using successive READ BINARY
commands.
EFIIDF (Image Instance Data Files)
Residing under DFGRAPHICS, there may be several image instance data files. Each Image Instance Data File contains data
for one or more image instances. These Efs containing image instance data shall have the following attributes:
Identifier: '4FXX'
File size: Y bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to Y
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
Image Instance Data
ETSI
M/O
M
Length
Y bytes
3GPP TS 31.102 version 13.3.0 Release 13
184
ETSI TS 131 102 V13.3.0 (2016-04)
Contents and coding:
- Image instance data are accessed using the image instance descriptors provided by EFIMG (see clause 4.6.1.1).
The identifier '4FXX' shall be different from one image instance data file to the other. For the range of 'XX',
TS 31.101 [11]. The length Y may be different from one image instance data file to the other.
4.6.1.3
EFICE_graphics (In Case of Emergency – Graphics)
This EF contains ICE graphical information, according to TS 22.101 [24].
This file shall be deactivated if the user does not wish the ICE information contained in this file to be available and
activated if the user wishes the ICE information in this file to be available.
For this EF the Total File Size data object shall be present within the FCP template in order for the ME to fit the picture
to the available memory.
Structure of EFICE_graphics at DFgraphics-level
Identifier: '4F21'
Structure: BER-TLV
Optional
SFI: Optional
Record length: X
Update activity: low
Access Conditions:
READ
ALWAYS
UPDATE
PIN
DEACTIVATE
PIN or Issuer Specified PIN (see Note)
ACTIVATE
PIN or Issuer Specified PIN (see Note)
Bytes
Description
M/O
Length
1 to X
ICE graphics Data object
M
X bytes
Note: The Issuer Specified PIN is a PIN with a global key reference (see TS 31.101 [11])
specified by the card Issuer.
- ICE graphics Data Object
Coding of the ICE graphics Data Objects
Length
Description
1 to T bytes (T ≤ 3) ICE graphics Data Object tag
1 to L (L ≤ 4)
X-L-T bytes
4.6.1.4
Void
4.6.1.5
Void
4.6.2
ICE graphics Data Object
length
ICE graphics Content
Coding
As defined in TS 31.101 [11]
for BER-TLV structured files
As defined in TS 31.101 [11]
for BER-TLV structured files
JPEG format
Status
M
M
M
Contents of files at the DFPHONEBOOK under the DFTELECOM
This DF has the same structure as DFPHONEBOOK under the ADFUSIM.
4.6.3
Contents of files at the DFMULTIMEDIA level
The Efs in the Dedicated File DFMULTIMEDIA contain multimedia information. This DF shall be present if service n°67 is
available, i.e. if the card supports MMS storage.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
4.6.3.1
185
ETSI TS 131 102 V13.3.0 (2016-04)
EFMML (Multimedia Messages List)
If service n°67 is "available", this file shall be present.
This file contains information about the MM data stored in EFMMDF. MM information are encapsulated in a BER-TLV
data object. Each data object in EFMML points to a corresponding MM in EFMMDF.
Identifier: '4F47'
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
Structure: BER-TLV
Update activity: low
Optional
PIN
PIN
ADM
ADM
Description
MM Descriptor Data Object(s)
M/O
M
Length
X bytes
- MM Descriptor Data Object
The content and coding are defined below:
Coding of the MM Descriptor Data Objects
Length
1 to A bytes (A ≤ 3)
Description
MM Descriptor Data Object tag
1 to B bytes (B ≤ 4)
MM Descriptor Data Object length
1 byte
1 byte
1 byte
1 byte
1 byte
1 or 2 bytes
1 byte
1 byte
1 to C bytes (C ≤ 3)
1 byte
1 byte
1 to D bytes (D ≤ 4)
1 byte
1 byte
2 bytes
1 byte
1 byte
1 to E bytes
MMS Implementation tag '80'
MMS Implementation length
MMS Implementation
MM File Identifier / SFI tag '81'
MM File Identifier / SFI length
MM File Identifier / SFI
MM Content Data Object Tag tag '82'
MM Content Data Object Tag length
MM Content Data Object Tag
MM Size tag '83'
MM Size length
MM Size in bytes
MM Status tag '84'
MM Status length
MM Status
MM Alpha Identifier tag '85'
MM Alpha Identifier length
MM Alpha Identifier
Coding
Status
As defined in TS 31.101 [11]
M
for BER-TLV structured files
As defined in TS 31.101 [11]
M
for BER-TLV structured files
M
M
See below
M
M
M
See below
M
M
M
See below
M
M
M
See below
M
M
M
See below
M
M
M
See below
M
- MMS Implementation
Contents:
The MMS Implementation indicates the used implementation type, e.g. WAP.
Coding:
Allocation of bits:
Bit number
Parameter indicated
1
WAP implementation of MMS
2 to 8
Reserved for future use
Bit value
0
1
Meaning
Implementation not supported.
Implementation supported.
- MM File Identifier / SFI
Contents:
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
186
ETSI TS 131 102 V13.3.0 (2016-04)
file identifier or SFI of EFMMDF which contains the actual MM message. If the length of this TLV object is
equal to 1 then the content indicates the SFI of the EFMMDF, the SFI is coded on b1 to b5. Otherwise the TLV
contains the file identifier.
Coding:
according to TS 31.101 [11].
- MM Content Data Object Tag
Contents:
tag indentifying a MM (i.e. identifying a data object) within EFMMDF.
Coding:
according to TS 31.101 [11].
- MM Size
Contents:
size of the corresponding MM stored in EFMMDF.
Coding:
according to TS 31.101 [11].
- MM Status
Contents:
The status bytes contain the status information of the stored Multimedia Message.
Coding:
First byte:
bit b1 indicates whether the MM has been read or not. Bit b2 indicates the MM forwarding status. Bit b3 indicates
whether it is a received MM or an originated MM. Bits b4 to b8 are reserved for future use.
Second byte:
Coding of the second byte depends on whether the MM has been identified as a received MM or originated MM in the
first byte:
- Received MM coding:
bits b1 and b2 are used to provide information on Read-reply reports. Bits b3 to b8 are reserved for
future use.
-
Originated MM coding:
bit b1 is used to provide information on Delivery-report. Bits b2 to b8 are reserved for future use.
First byte:
b8
b7
b6
b5
b4
b3
b2
b1
MM read, bit = 1 / MM not read, bit = 0
MM forwarded, bit = 1
Received MM, bit = 1 / Originated MM, bit = 0
RFU, bit = 0
Second byte coding for Received MM:
b8
b7
b6
b5
b4
b3
b2
b1
Read-reply report requested, bit = 1
Read-reply report sent, bit = 1
Read-reply report created, bit = 1
Delivery report requested, bit = 1
Delivery report creation allowed, bit = 1
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
187
ETSI TS 131 102 V13.3.0 (2016-04)
RFU, bit = 0
Second byte coding for Originated MM:
b8
b7
b6
b5
b4
b3
b2
b1
Delivery report received, bit = 1
Delivery report requested, bit = 1
Read-Reply report requested, bit = 1
Read-Reply report received, bit = 1
MM sent, bit = 1
RFU, bit = 0
- MM Alpha Identifier
Contents:
information about the MM to be displayed to the user (e.g. sender, subject, date etc).
Coding:
this alpha identifier shall use either:
- the SMS default 7-bit coded alphabet as defined in TS 23.038 [5] with bit 8 set to 0. The alpha
identifier shall be left justified. Unused bytes shall be set to 'FF';
- or one of the UCS2 coded options as defined in the annex of TS 31.101 [11].
4.6.3.2
EFMMDF (Multimedia Messages Data File)
If service n°67 is "available", this file shall be present.
Residing under DFMULTIMEDIA, this EF contains Multimedia Messages data. The structure of this EF is BER-TLV (see
TS 31.101 [11]). Each MM in this file is identified by a tag. The tag value for a particular MM in this file is stored in
EFMML.
Identifier: '4F48'
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to X
Structure: BER-TLV
Optional
Update activity: low
PIN
PIN
ADM
ADM
Description
MM Content Data Object(s)
M/O
M
Length
X bytes
- MM Content Data Object
The content and coding are defined below:
Coding of the MM Content Data Objects
Length
Description
1 to T bytes (T ≤ 3) MM Content Data Object tag
1 to L (L ≤ 4)
MM Content Data Object length
X-L-T bytes
MM Content
Coding
As defined in TS 31.101 [11]
for BER-TLV structured files
As defined in TS 31.101 [11]
for BER-TLV structured files
According to MMS
Implementation
Status
M
M
M
Contents:
The Multimedia Message content consists of MM headers and a message body. The content of the Multimedia Message
data depends on whether the MM has been identified as a received MM or an originated MM:
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
188
ETSI TS 131 102 V13.3.0 (2016-04)
-
For a received message, the stored Multimedia Message data consists of the information elements (i.e.
relevant MM control information and MM content) of the MM1_retrieve.RES (see TS 23.140 [38]).
-
For an originated message, the stored Multimedia Message data consists of the information elements (i.e.
relevant MM control information and MM content) of the MM1_submit.REQ (see TS 23.140 [38]).
Coding:
The MM data encapsulation scheme and encoding rules are defined by the MMS Implementation.
4.6.4
Contents of files at the DFMCPTT level
The EFs in the Dedicated File DFMCPTT contain management objects related to MCPTT, as specified in 3GPP TS 23.179
[83].
4.6.4.1
EFMST (MCPTT Service Table)
If service n°109 is "available" in the USIM Service Table or service n°bbb is "available" in the ISIM Service Table, this
file shall be present. This EF indicates the coding of the MCPTT management objects and which MCPTT services are
available. If a service is not indicated as available in the MCPTT Service Table, the ME shall not select this service.
Identifier: '4F01'
SFI: '01'
File size: X bytes, (X ≥ 2)
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1
1
2
etc.
X
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
Coding of the MCPTT management objects
Services n°1 to n°8
Services n°9 to n°16
M/O
M
M
O
Length
1 byte
1 byte
1 byte
O
1 byte
Services n°(8X-7) to n°(8X)
Coding of the MCPTT management objects
Contents:
Indicates the coding used for all the MCPTT management objects.stored in the DFMCPTT.
Coding:
A value of '00' indicates the XML format described in TS 24.383 [xx]. All other values are reserved.
Editor"s Note: the definition of other encoding formats is for future study.
The EF shall contain at least one byte for services. Further bytes may be included, but if the EF includes an optional
byte, then it is mandatory for the EF to also contain all bytes before that byte. Other services are possible in the future
and will be coded on further bytes in the EF.
-Services
Contents:
Service n°1:
Service n°2:
Service n°3:
Service n°4:
UE configuration data
User configuration data
Group configuration data
Service configuration data
Coding:
Same as coding of USIM Service Table.
4.6.4.2
EFMCPTT_UE_CONFIG (MCPTT UE configuration data)
If service n°1 is "available" in the MCPTT Service Table, this file shall be present.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
189
ETSI TS 131 102 V13.3.0 (2016-04)
This EF contains the MCPTT UE configuration data, as specified in TS 24.383 [82] Annex B.2.
Identifier: '4F02'
SFI: '02'
File size: X bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to Y
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
MCPTT UE configuration data
M/O
M
Length
Y bytes
The MCPTT UE configuration data is encoded as specified in the MCPTT Service Table.
Unused bytes shall be set to 'FF'.
4.6.4.3
EFMCPTT_USER_CONFIG (MCPTT User configuration data)
If service n°2 is "available" in the MCPTT Service Table, this file shall be present.
This EF contains the MCPTT User configuration data, as specified in TS 24.383 [82] Annex B.3.
Identifier: '4F03'
SFI: '03'
File size: X bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to Y
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
MCPTT User configuration data
M/O
M
Length
Y bytes
The MCPTT User configuration data is encoded as specified in the MCPTT Service Table.
Unused bytes shall be set to 'FF'.
4.6.4.4
EFMCPTT_GROUP_CONFIG (MCPTT Group configuration data)
If service n°3 is "available" in the MCPTT Service Table, this file shall be present.
This EF contains the MCPTT Group configuration data, as specified in TS 24.383 [82] Annex B.4.
Identifier: '4F04'
SFI: '04'
File size: X bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to Y
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
MCPTT Group configuration data
M/O
M
The MCPTT Group configuration data is encoded as specified in the MCPTT Service Table.
Unused bytes shall be set to 'FF'.
ETSI
Length
Y bytes
3GPP TS 31.102 version 13.3.0 Release 13
4.6.4.5
190
ETSI TS 131 102 V13.3.0 (2016-04)
EFMCPTT_SERVICE_CONFIG (MCPTT Service configuration data)
If service n°4 is "available" in the MCPTT Service Table, this file shall be present.
This EF contains the MCPTT Service configuration data, as specified in TS 24.383 [82] Annex B.5.
Identifier: '4F05'
SFI: '05'
File size: X bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
1 to Y
Structure: transparent
Optional
Update activity: low
PIN
ADM
ADM
ADM
Description
MCPTT Service configuration data
M/O
M
Length
Y bytes
The MCPTT Service configuration data is encoded as specified in the MCPTT Service Table.
Unused bytes shall be set to 'FF'.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
4.7
191
ETSI TS 131 102 V13.3.0 (2016-04)
Files of USIM
This clause contains two figures depicting the file structure of the UICC and the ADFUSIM. ADFUSIM shall be selected
using the AID and information in EFDIR.
MF
'3F00'
DFGSM
'7F20'
see TS
51.011 [18]
DFCD
'7F11'
see TS
31.101 [11]
EFDIR
'2F00'
EFPL
'2F05'
EFARR
'2F06'
EFICCID
'2FE2'
EFUMPC
'2F08'
EFARR
'6F06'
EFADN
'6F3A'
EFFDN
'6F3B'
EFSMS
'6F3C'
EFMSISDN
'6F40'
EFSMSP
'6F42'
EFSMSS
'6F43'
EFLND
'6F44'
EFSMSR
'6F47'
EFSDN
'6F49'
EFEXT1
'6F4A'
EFEXT2
'6F4B'
EFEXT3
'6F4C'
EFBDN
'6F4D'
EFEXT4
'6F4E'
EFECCP
'6F4F'
EFRMA
'6F53'
EFSUME
'6F54'
EFICE_DN
'6FE0'
EFICE_FF
'6FE1'
EFIMG
'4F20'
EFIIDFn
'4FXX'
EFICE graphics
'4F21'
EFPSC
'4F22'
EFCC
'4F23'
EFPUID
'4F24'
EFPBR
'4F30'
EFUID
'4FXX'
EFCCP1
'4FXX'
EFIAP
'4FXX'
EFADN
'4FXX'
EFEXT1
'4FXX'
EFPBC
'4FXX'
EFGRP
'4FXX'
EFAAS
'4FXX'
EFGAS
'4FXX'
EFANR
'4FXX'
EFSNE
'4FXX'
EFEMAIL
'4FXX'
EFPURI
'4FXX'
DFTELECOM
'7F10'
EFPSISMSC
'6FE5'
DFGRAPHICS
'5F50'
DFPHONEBOOK
'5F3A'
DFMULTIMEDIA
'5F3B'
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
EFMML
'4F47'
DFMMSS
'5F3C'
192
ETSI TS 131 102 V13.3.0 (2016-04)
EFMMDF
'4F48'
See
C.S0074A[53]
DFMCPTT
'5F3D'
EFMST
'4F01'
EFMCPTT_UE_CO
EFMCPTT_USER_C
NFIG
ONFIG
CONFIG
CE CONFIG
'4F02'
'4F03'
'4F04'
'4F05'
EFMCPTT_GROUP
EFMCPTT_SERVI
NOTE 1: Files under DFTELECOM with shaded background are defined in TS 51.011 [18].
NOTE 2: The value '6F65' under ADFUSIM was used in earlier versions of this specification, and should not be reassigned in future versions.
NOTE 3: Files under DFMMSS are defined in C.S0074-A [53].
Figure 4.1: File identifiers and directory structures of UICC
ADFUSIM
EFLI
'6F05'
EFARR
'6F06'
EFIMSI
'6F07'
EFKeys
'6F08'
EFKeysPS
'6F09'
EFDCK
'6F2C'
EFHPPLMN
'6F31'
EFCNL
'6F32'
EFACMmax
'6F37'
EFUST
'6F38'
EFACM
'6F39'
EFFDN
'6F3B'
EFSMS
'6F3C'
EFGID1
'6F3E'
EFGID2
'6F3F'
EFMSISDN
'6F40'
EFPUCT
'6F41'
EFSMSP
'6F42'
EFSMSS
'6F43'
EFCBMI
'6F45'
EFSPN
'6F46'
EFSMSR
'6F47'
EFCBMID
'6F48'
EFSDN
'6F49'
EFEXT2
'6F4B'
EFEXT3
'6F4C'
EFBDN
'6F4D'
EFEXT5
'6F4E'
EFCCP2
'6F4F'
EFCBMIR
'6F50'
EFEXT4
'6F55'
EFEST
'6F56'
EFACL
'6F57'
EFCMI
'6F58'
EFSTART-HFN
'6F5B'
EFTHRESHOLD
'6F5C'
EFPLMNwAcT
'6F60'
EFOPLMNwAcT
'6F61'
EFHPLMNwAcT
'6F62'
EFPSLOCI
'6F73'
EFACC
'6F78'
EFFPLMN
'6F7B'
EFLOCI
'6F7E'
EFICI
'6F80'
EFOCI
'6F81'
EFICT
'6F82'
EFOCT
'6F83'
EFAD
'6FAD'
EFVGCS
'6FB1'
EFVGCSS
'6FB2'
EFVBS
'6FB3'
EFVBSS
'6FB4'
EFeMLPP
'6FB5'
EFAaeM
'6FB6'
EFECC
'6FB7'
EFHiddenkey
'6FC3'
EFNETPAR
'6FC4'
EFPNN
'6FC5'
EFOPL
'6FC6'
EFMBDN
'6FC7'
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
193
ETSI TS 131 102 V13.3.0 (2016-04)
EFEXT6
'6FC8'
EFMBI
'6FC9'
EFMWIS
'6FCA'
EFCFIS
'6FCB'
EFEXT7
'6FCC'
EFSPDI
'6FCD'
EFMMSN
'6FCE'
EFEXT8
'6FCF'
EFMMSICP
'6FD0'
EFMMSUP
'6FD1'
EFMMSUCP
'6FD2'
EFNIA
'6FD3'
EFVGCSCA
'6FD4'
EFVBSCA
'6FD5'
EFGBAP
'6FD6'
EFMSK
'6FD7'
EFMUK
'6FD8'
EFEHPLMN
'6FD9'
EFGBANL
'6FDA'
EFEHPLMNPI
'6FDB'
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
194
ETSI TS 131 102 V13.3.0 (2016-04)
EFLRPLMNSI
'6FDC'
EFNAFKCA
'6FDD'
EFSPNI
'6FDE'
EFPNNI
'6FDF'
EFNCP-IP
'6FE2'
EFEPSLOCI
'6FE3'
EFEPSNSC
'6FE4'
EFUFC
'6FE6'
EFUICCIARI
'6FE7'
EFNASCONFIG
'6FE8'
EFPWS
'6FEC'
EFFDNURI
'6FED'
EFBDNURI
'6FEE'
EFSDNURI
'6FEF'
EFIWL
'6FF0'
EFIPS
EFIPD
EFePDGId
EFePDGSelecti
EFePDGIdEm
on
'6FF1'
'6FF2'
'6FF3'
'6FF4'
'6FF5'
EFPSC
'4F22'
EFCC
'4F23'
EFPUID
'4F24'
EFPBR
'4F30'
EFUID
'4FXX'
EFCCP1
'4FXX'
EFIAP
'4FXX'
EFADN
'4FXX'
EFEXT1
'4FXX'
EFPBC
'4FXX'
EFGRP
'4FXX'
EFAAS
'4FXX'
EFGAS
'4FXX'
EFANR
'4FXX'
EFSNE
'4FXX'
EFEMAIL
'4FXX'
EFPURI
'4FXX'
EFKc
'4F20'
EFKcGPRS
'4F52'
EFCPBCCH
'4F63'
EFinvSCAN
'4F64'
EFMexE-ST
'4F40'
EFORPK
'4F41'
EFARPK
'4F42'
EFTPRK
'4F43'
EFTKCDF
'4FXX'
EFSAI
'4F30'
EFSLL
'4F31'
EFPseudo
'4F41'
EFUPLMNWLAN
'4F42'
EF0PLMNWLAN
'4F43'
EFUWSIDL
'4F44'
EFOWSIDL
'4F45'
EFWRI
'4F46'
EFHWSIDL
'4F47'
EFWEHPLMNPI
'4F48'
EFWHPI
'4F49'
EFWLRPLMN
'4F4A'
EFePDGSelecti
onEm
'6FF6'
DFPHONEBOOK
'5F3A'
DFGSM-ACCESS
'5F3B'
DFMexE
'5F3C'
DFSoLSA
'5F70'
DFWLAN
'5F40'
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
195
ETSI TS 131 102 V13.3.0 (2016-04)
EFHPLMNDAI
'4F4B'
DFHNB
'5F50'
EFACSGL
'4F81'
EFCSGT
'4F82'
EFHNBN
'4F83'
EFOCSGL
'4F84'
EFOCSGT
'4F85'
EFPROSE_ANN
EFPROSEFUNC
EFPROSE_RADIO
EFPROSE_RADIO
EFOHNBN
'4F86'
DFProSe
'5F90'
EFPROSE_MON
COM
MON
'4F01'
'4F02'
'4F03'
'4F04'
'4F05'
EFPROSE_RADIO
EFPROSE_POLIC
EFPROSE_PLMN
EFPROSE_GC
EFPST
ANN
Y
'4F06'
'4F07'
'4F08'
'4F09'
'4F10'
EFPROSE_UIRC
EFPROSE_GM_DI
EFPROSE_RELAY
EFPROSE_RELAY
SCOVERY
'4F11'
'4F12'
EFACDC_LIST
EFACDC_OS_CON
'4F01'
'4FXX'
DISCOVERY
'4F13'
'4F14'
DFACDC
'5FA0'
FIG
Figure 4.2: File identifiers and directory structures of USIM
5
Application protocol
The requirements stated in the corresponding section of TS 31.101 [11] apply to the USIM application.
The procedures listed in clause "USIM management procedures" are required for execution of the procedures in the
subsequent clauses "USIM security related procedures" and "Subscription related procedures". The procedures listed in
clauses "USIM security related procedures" are mandatory. The procedures listed in "Subscription related procedures"
are only executable if the associated services, which are optional, are provided in the USIM. However, if the procedures
are implemented, it shall be in accordance with clause "Subscription related procedures".
If a procedure is related to a specific service indicated in the USIM Service Table, it shall only be executed if the
corresponding bits denote this service as "service available" (see clause "EFUST"). In all other cases the procedure shall
not start.
5.1
USIM management procedures
If a USIM application is present on the UICC, a 3GPP ME shall only use the USIM application regardless of the radio
access technology in use. In this case, a possibly existing SIM application shall never be used by a 3GPP ME.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
5.1.1
5.1.1.1
196
ETSI TS 131 102 V13.3.0 (2016-04)
Initialisation
USIM application selection
After UICC activation (see TS 31.101 [11]), the ME selects a USIM application. If no EFDIR file is found or no USIM
applications are listed in the EFDIR file, the ME may then try to select the GSM application as specified in
TS 51.011 [18].
NOTE: there may be cards that need to be reset before selecting the GSM application.
After a successful USIM application selection, the selected USIM (AID) is stored on the UICC. This application is
referred to as the last selected USIM application. The last selected USIM application shall be available on the UICC
after a deactivation followed by an activation of the UICC.
If a USIM application is selected using partial DF name, the partial DF name supplied in the command shall uniquely
identify a USIM application. Furthermore if a USIM application is selected using a partial DF name as specified in
TS 31.101 [11] indicating in the SELECT command the last occurrence the UICC shall select the USIM application
stored as the last USIM application. If, in the SELECT command, the options first, next/previous are indicated, they
have no meaning if an application has not been previously selected in the same session and shall return an appropriate
error code.
5.1.1.2
USIM initialisation
The ME requests the emergency call codes. For service requirements, see TS 22.101 [24].
The ME requests the Language Indication. The preferred language selection shall always use the EFLI in preference to
the EFPL at the MF unless any of the following conditions applies:
-
if the EFLI has the value 'FFFF' in its highest priority position, then the preferred language selection shall be the
language preference in the EFPL at the MF level according the procedure defined in TS 31.101 [11];
-
if the ME does not support any of the language codes indicated in EFLI , or if EFLI is not present, then the
language selection shall be as defined in EFPL at the MF level according the procedure defined in
TS 31.101 [11];
-
if neither the languages of EFLI nor EFPL are supported by the terminal, then the terminal shall use its own
internal default selection.
The ME then runs the user verification procedure. If the procedure is not performed successfully, the USIM
initialisation stops.
The ME performs the administrative information request.
The ME performs the USIM Service Table request.
The ME performs the Enabled Services Table Request.
In case FDN is enabled, an ME which does not support FDN shall allow emergency calls but shall not allow MO calls
and MO-SMS.
If BDN is enabled, an ME which does not support Call Control shall allow emergency calls but shall not allow MO
calls.
If ACL is enabled, an ME which does not support ACL shall not send any APN to the network.
If all these procedures have been performed successfully then 3G session shall start. In all other cases 3G session shall
not start.
Afterwards, the ME runs the following procedures if the ME and the USIM support the related services:
-
IMSI request;
-
Access control information request;
-
Higher Priority PLMN search period request;
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
197
ETSI TS 131 102 V13.3.0 (2016-04)
-
EHPLMN request
-
HPLMN selector with Access Technology request;
-
User controlled PLMN selector with Access Technology request;
-
Operator controlled PLMN selector with Access Technology request;
-
GSM initialisation requests;
-
Location Information request for CS-and/or PS-mode and/or EPS;
-
Cipher key and integrity key request for CS- and/or PS-mode;
-
EPS NAS Security Context request for EPS;
-
Forbidden PLMN request;
-
Initialisation value for hyperframe number request;
-
Maximum value of START request;
-
CBMID request;
-
Depending on the further services that are supported by both the ME and the USIM the corresponding Efs have
to be read.
After the USIM initialisation has been completed successfully, the ME is ready for a 3G session and shall indicate this
to the USIM by sending a particular STATUS command.
5.1.1.3
GSM related initialisation procedures
If GSM access is enabled the following procedures shall be performed if the applicable service is enabled and if the ME
supports the GSM compact access technology.
-
Investigation Scan request;
-
CPBCCH information request.
5.1.2
5.1.2.1
Session termination
3G session termination
NOTE 1: This procedure is not to be confused with the deactivation procedure in TS 31.101 [11].
The 3G session is terminated by the ME as follows.
The ME shall indicate to the USIM by sending a particular STATUS command that the termination procedure is
starting.
The ME then runs all the procedures which are necessary to transfer the following subscriber related information to the
USIM, if the ME and the USIM support the related services:
-
Location Information update for CS-and/or PS-domain and/or EPS.
-
Cipher Key and Integrity Key update for CS-and/or PS-domain.
-
EPS NAS Security Context update for EPS domain.
-
Advice of Charge increase.
-
Forbidden PLMN update.
-
GSM Termination procedures.
Finally, the ME deletes all these subscriber related information elements from its memory.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
198
ETSI TS 131 102 V13.3.0 (2016-04)
NOTE 2: If the ME has already updated any of the subscriber related information during the 3G session, and the
value has not changed until 3G session termination, the ME may omit the respective update procedure.
To actually terminate the session, the ME shall then use one of the mechanisms described in TS 31.101 [11].
5.1.2.1.1
GSM termination procedures
If GSM access is enabled the following termination procedures shall be performed if the applicable service is enabled.
-
CPBCCH information update (if the ME supports the GSM compact access technology);
5.1.2.2
3G session reset
The ME shall follow the 3G session termination procedure defined above except that the ME shall use the Application
session reset procedure as described in TS 31.101 [11] instead of one of the mechanisms to terminate the session.
5.1.3
USIM application closure
After termination of the 3G session as defined in 5.1.2 the USIM application may be closed by closing the logical
channels that are used to communicate with this particular USIM application.
5.1.4
Emergency call codes
Request:
The ME performs the reading procedure with EFECC. If EFECC does not contain any valid number,
the ME shall use the emergency numbers it stores for use in setting up an emergency call without a
USIM.
Update:
The ME performs the updating procedure with EFECC.
NOTE:
5.1.5
The update procedure is only applicable when access conditions of ADM for update is set to ALW, PIN
or PIN2.
Language indication
Request:
The ME performs the reading procedure with EFLI.
Update:
The ME performs the updating procedure with EFLI.
5.1.6
Administrative information request
The ME performs the reading procedure with EFAD.
5.1.7
USIM service table request
The ME performs the reading procedure with EFUST.
5.1.8
Void
5.1.9
UICC presence detection
The ME checks for the presence of the UICC according to TS 31.101 [11] within all 30s periods of inactivity on the
UICC-ME interface during a call. If the presence detection according to TS 31.101 [11] fails the call shall be terminated
as soon as possible but at least within 5s after the presence detection has failed. Here a call covers a circuit switched
call, and/or an active PDP context or an active EPS bearer context.
The ME may suspend the UICC presence detection based on STATUS commands in case it has an active PDP context
or an active EPS bearer context, but has not exchanged any data with the network within a 30s period of inactivity on
the UICC-ME interface, and resume it as soon as data is exchanged with the network, sending immediately a new
STATUS command.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
5.1.10
199
ETSI TS 131 102 V13.3.0 (2016-04)
UICC interface in PSM
As defined in 3GPP TS 23.682 [78], PSM is intended for UEs that are expecting only infrequent mobile originating and
terminating services and that can accept a corresponding latency in the mobile terminating communication. In order to
reduce power consumption while in PSM, and only in case the PIN of the USIM is disabled, the ME may optionally
deactivate the UICC (as specified in clause 6A.1 of 3GPP TS 31.101 [11]) after entering the PSM. In this case, the ME
shall re-activate the UICC (as specified in clause 6A.1 of 3GPP TS 31.101 [11]), re-initialize the USIM (as specified in
clause 5.1.1) and take appropriate steps to verify that the same USIM is used, before it can leave the PSM.
Verification shall include at least the check of the content of the following EFs: EFICCID, EFIMSI, EFLOCI, EFPSLOCI and
EFEPSLOCI.
When the UE is in PSM and in case the ME wants to deactivate the UICC, it shall wait until the current proactive UICC
session, if any, is terminated.
5.1.11
UICC interface during eDRX
In order to reduce power consumption when the UE uses extended idle mode DRX cycle, as defined in
3GPP TS 24.301 [51], in case the PIN of the USIM is disabled and deactivation of UICC is authorized in EFAD, the UE
may optionally deactivate the UICC (as specified in clause 6A.1 of 3GPP TS 31.101 [11]) during the extended idle
mode DRX cycle. In this case, the UE shall re-activate the UICC (as specified in clause 6A.1 of 3GPP TS 31.101 [11]),
re-initialize the USIM (as specified in clause 5.1.1) and take appropriate steps to verify that the same USIM is used,
before the end of the extended idle mode DRX cycle or before any other transmission to the network.
Verification shall include at least the check of the content of the following EFs: EFICCID, EFIMSI, EFLOCI, EFPSLOCI and
EFEPSLOCI.
5.2
USIM security related procedures
5.2.1
Authentication algorithms computation
The ME selects a USIM application and uses the AUTHENTICATE command (see 7.1.1). The response is sent to the
ME (in case of the T=0 protocol when requested by a subsequent GET RESPONSE command).
After a successful AUTHENTICATE command, the ME shall perform cipher and integrity key update procedure.
5.2.2
IMSI request
The ME performs the reading procedure with EFIMSI.
5.2.3
Access control information request
The ME performs the reading procedure with EFACC.
5.2.4
Higher Priority PLMN search period request
The ME performs the reading procedure with EFHPPLMN.
5.2.5
Location information
Request:
The ME performs the reading procedure with EFLOCI.
Update:
The ME performs the updating procedure with EFLOCI.
In the case when updating EFLOCI with data containing the TMSI value and the card reports the error '6581' (Memory
Problem), the ME shall terminate 3G operation.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
5.2.6
200
Cipher and Integrity key
Request:
The ME performs the reading procedure with EFKeys.
Update:
The ME performs the updating procedure with EFKeys.
5.2.7
ETSI TS 131 102 V13.3.0 (2016-04)
Forbidden PLMN
Request: The ME performs the reading procedure with EFFPLMN.
Update:
The ME performs the updating procedure with EFFPLMN.
5.2.8
Void
5.2.9
User Identity Request
The ME selects a USIM and performs the reading procedure with EFIMSI.
5.2.10
GSM Cipher key
Requirement:
Service n°27 "available".
Request:
The ME performs the reading procedure with EFKc.
Update:
The ME performs the updating procedure with EFKc.
5.2.11
GPRS Cipher key
Requirement:
Service n°27 "available".
Request:
The ME performs the reading procedure with EFKcGPRS.
Update:
The ME performs the updating procedure with EFKcGPRS.
5.2.12
Initialisation value for Hyperframe number
Request:
The ME performs the reading procedure with EFSTART-HFN.
Update:
The ME performs the updating procedure with EFSTART-HFN.
5.2.13
Request:
5.2.14
Request:
5.2.15
Maximum value of START
The ME performs the reading procedure with EFTHRESHOLD.
HPLMN selector with Access Technology request
The ME performs the reading procedure with EFHPLMNwAcT.
Packet Switched Location information
Request:
The ME performs the reading procedure with EFPSLOCI.
Update:
The ME performs the updating procedure with EFPSLOCI.
5.2.16
Request:
Cipher and Integrity key for Packet Switched domain
The ME performs the reading procedure with EFKeysPS.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
Update:
5.2.17
201
ETSI TS 131 102 V13.3.0 (2016-04)
The ME performs the updating procedure with EFKeysPS.
LSA information
Requirement:
Service n°23 "available".
Request:
The ME performs the reading procedure with EFSAI, EFSLL and its associated LSA Descriptor files.
Update:
The ME performs the updating procedure with EFSLL.
5.2.18
Voice Group Call Services
Requirement:
Service n°57 "available".
Voice Group Call Service
Request:
The ME performs the reading procedure with EFVGCS.
Voice Group Call Service Status
Request:
The ME performs the reading procedure with EFVGCSS.
Update:
The ME performs the updating procedure with EFVGCSS.
5.2.19
Voice Broadcast Services
Requirement:
Service n°58 "available".
Voice Broadcast Service
Request:
The ME performs the reading procedure with EFVBS.
Voice Broadcast Service Status
Request:
The ME performs the reading procedure with EFVBSS.
Update:
The ME performs the updating procedure with EFVBSS.
5.2.20
Generic Bootstrapping architecture (Bootstrap)
The ME uses the AUTHENTICATE command in GBA security context (Bootstrapping Mode) (see 7.1.1). The
response is sent to the ME.
After a successful GBA_U Procedure, the ME shall update the B-TID field and the Key Life Time field in EFGBABP
5.2.21
Generic Bootstrapping architecture (NAF Derivation)
The ME shall first read EFGBABP. The ME then uses the AUTHENTICATE command in GBA security context (NAF
Derviation Mode) (see 7.1.1). The response is sent to the ME.
5.2.22
MSK MIKEY Message Reception
The ME performs the reading of EFMUK and retrieves the Time Stamp Counter Value associated with the involved
MUK. Then it proceeds with Timestamp Payload checking as described in TS 33.246 [43].
5.2.23
MTK MIKEY Message Reception
The ME performs the reading of EFMSK and retrieves the Time Stamp Counter Value associated with the involved MSK.
Then it proceeds with Timestamp Payload checking as described in TS 33.246 [43].
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
5.2.24
Void
5.2.25
EHPLMN request
202
Requirement:
Service n°71 "available".
Request:
The ME performs the reading procedure with EFEHPLMN.
5.2.26
Last RPLMN Selection Indication request
Requirement:
Service n°74 "available".
Request:
The ME performs the reading procedure with EFLRPLMNSI.
5.2.27
EPS Location Information
Requirement:
Service n°85 "available".
Request:
The ME performs the reading procedure with EFEPSLOCI.
Update:
The ME performs the updating procedure with EFEPSLOCI.
5.2.28
ETSI TS 131 102 V13.3.0 (2016-04)
EPS NAS Security Context
Requirement:
Service n°85 "available".
Request:
The ME performs the reading procedure with EFEPSNSC.
Update:
The ME performs the updating procedure with EFEPSNSC.
In order to prevent UICC memory wear out due to excessive writing, the update of EPS NAS security context shall be
according to the rules and procedures specified in TS 33.401 [52].
5.2.29
Non Access Stratum Configuration
Requirement:
Service n°96 "available".
Request:
The ME performs the reading procedure with EFNASCONFIG.
For each NAS configuration parameter, a parameter provided in EFNASCONFIG shall take precedence over the
corresponding parameter stored in the ME's non-volatile memory.
5.2.30
PWS Configuration
Requirement:
Service n°97 "available".
Request:
The ME performs the reading procedure with EFPWS.
5.3
Subscription related procedures
5.3.1
Phone book procedures
5.3.1.1
Initialisation
The ME first reads the content of EFPBR to determine the configuration phonebook. If the EFIAP file is indicated in EFPBR
following tag 'A8' the ME reads the content of EFIAP in order to establish the relation ship between the content in the
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
203
ETSI TS 131 102 V13.3.0 (2016-04)
files indicated using tag 'A9' and files indicated by tag 'A8'. The ME may read the contents of the phone book related
files in any order.
5.3.1.2
Creation/Deletion of information
In order to avoid unlinked data to introduce fragmentation of the files containing phone book data the following
procedures shall be followed when creating a new entry in the phone book. The data related to EFADN is first stored in
the relevant record. As the record number is used as a pointer the reference pointer is now defined for the entry. The
rule for storing additional information for an entry is that the reference pointer shall be created before the actual data is
written to the location.
In case of deletion of a complete or part of an entry the data shall be deleted first followed by the reference pointer for
that data element. In case of deletion of a complete entry the contents of EFADN is the last to be deleted.
5.3.1.3
Hidden phone book entries
If a phone book entry is marked as hidden by means of EFPBC the ME first prompts the user to enter the 'Hidden Key'.
The key presented by the user is compared against the value that is stored in the corresponding EFHiddenkey. Only if the
presented and stored hidden key are identical the ME displays the data stored in this phone book entry. Otherwise the
content of this phone book entry is not displayed by the ME.
Even if the terminal does not support the Hidden Key Procedures, a hidden phone book entry shall not be displayed by
the terminal.
Request:
The ME performs the reading procedure with EFHiddenkey.
Update:
The ME performs the updating procedure with EFHiddenkey.
5.3.2
Dialling numbers
Requirements:
-
Service n°1 "available" for ADN located under the local phonebook;
-
Presence of EFADN in EFPBR for ADN located under the global phonebook;
-
Presence of EFANR in EFPBR for ANR;
-
Service n°2 "available" for FDN;
-
Service n°21 "available" for MSISDN;
-
Service n°4 "available" for SDN;
-
Service n°6 "available" for BDN;
-
Service n°8 "available" for EFOCI;
-
Service n°9 "available" for EFICI.
The following procedures may not only be applied to EFADN and its associated extension files EFCCP1 and EFEXT1 as
described in the procedures below, but also to EFANR, EFFDN, EFMSISDN, EFBDN, EFSDN, EFOCI, EFICI, and EFMBDN and
their associated extension files. If these files are not "available", as denoted in the USIM service table, the current
procedure shall be aborted and the appropriate Efs shall remain unchanged.
As an example, the following procedures are described as applied to ADN.
Update:
The ME analyses and assembles the information to be stored as follows (the byte identifiers used
below correspond to those in the definition of the relevant Efs in the present document):
i) The ME identifies the Alpha-tagging, Capability/Configuration1 Record Identifier and Extension1 Record
Identifier.
ii) The dialling number/SSC string shall be analysed and allocated to the bytes of the EF as follows:
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
204
-
if a "+" is found, the TON identifier is set to "International";
-
if 20 or less "digits" remain, they shall form the dialling number/SSC string;
-
if more than 20 "digits" remain, the procedure shall be as follows:
ETSI TS 131 102 V13.3.0 (2016-04)
- The ME seeks for a free record in EFEXT1. If an Extension1 record is not marked as "free", the ME runs the Purge
procedure. If an Extension1 record is still unavailable, the procedure is aborted.
- The first 20 "digits" are stored in the dialling number/SSC string. The value of the length of BCD number/SSC
contents is set to the maximum value, which is 11. The Extension1 record identifier is coded with the associated record
number in the EFEXT1. The remaining digits are stored in the selected Extension1 record where the type of the record is
set to "additional data". The first byte of the Extension1 record is set with the number of bytes of the remaining
additional data. The number of bytes containing digit information is the sum of the length of BCD number/SSC contents
of EFADN and byte 2 of all associated chained Extension1 records containing additional data.
iii) If a called party subaddress is associated to the ADN/SSC the procedure shall proceed as follows:
-
If the length of the called party subaddress is less than or equal to 11 bytes (see TS 24.008 [9] for coding):
- The ME seeks for a free record in EFEXT1. If an Extension1 record is not marked as "free", the ME runs the Purge
procedure. If an Extension1 record is still unavailable, the procedure is aborted.
- The ME stores the called party subaddress in the Extension1 record, and sets the Extension1 record type to "called
party subaddress".
-
If the length of the called party subaddress is greater than 11 bytes (see TS 24.008 [9] for coding):
-
The ME seeks for two free records in EFEXT1. If no such two records are found, the ME runs the Purge
procedure. If two Extension1 records are still unavailable, the procedure is aborted.
-
The ME stores the called party subaddress in the two Extension1 records. The identifier field in the
Extension1 record containing the first part of the subaddress data is coded with the associated EFEXT1
record number containing the second part of the subaddress data. Both Extension1 record types are set to
"called party subaddress".
Once i), ii), and iii) have been considered the ME performs the updating procedure with EFADN. If the USIM has no
available empty space to store the received ADN/SSC, or if the procedure has been aborted, the ME advises the user.
For reasons of memory efficiency, the ME may analyse all Extension1 records to recognise if the additional or
subaddress data to be stored is already existing in EFEXT1. In this case, the ME may use the existing chain or the last part
of the existing chain from more than one ADN. The ME is only allowed to store extension data in unused records. If
existing records are used for multiple access, the ME shall not change any data in those records to prevent corruption of
existing chains.
Erasure:
The ME sends the identification of the information to be erased. The content of the identified
record in EFADN is marked as "free".
Request:
The ME sends the identification of the information to be read. The ME shall analyse the data of
EFADN to ascertain, whether additional data is associated in EFEXT1 or EFCCP1. If necessary, then the
ME performs the reading procedure on these Efs to assemble the complete ADN/SSC.
Purge:
The ME shall access each EF which references EFEXT1 (EFEXT2, EFEXT6) for storage and shall
identify records in these files using extension data (additional data or called party subaddress).
Note that existing chains have to be followed to the end. All referred Extension1 (Extension2,
Extension6) records are noted by the ME. All Extension1 (Extension2, Extension6) records not
noted are then marked by the ME as "free" by setting the whole record to 'FF'.
The following three procedures are only applicable to service n°2 (FDN).
FDN capability request. The ME shall check the state of service n°2, i.e. if FDN is "enabled" or "disabled". If FDN is
enabled, the ME shall only allow outgoing calls as defined in the fixed number dialling description in TS 22.101 [24].
To ascertain the state of FDN, the ME shall check in EFUST and EFEST if FDN is enabled (service activated and
available). In all other cases service n°2 is disabled.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
205
ETSI TS 131 102 V13.3.0 (2016-04)
FDN enabling is done by activating the FDN service in EFEST.
FDN disabling is done by deactivating the FDN service in EFEST.
The following three procedures are only applicable to service n°6 (BDN).
-
BDN capability request. The ME shall check the state of service n°6, i.e. if BDN is "enabled" or "disabled". To
ascertain the state of BDN, the ME shall check in EFUST and EFEST if BDN is "enabled" (service available and
activated). In all other cases, the BDN service is "disabled".
-
BDN enabling is done by activating the BDN service in EFEST.
-
BDN disabling is done by deactivating the BDN service in EFEST.
5.3.3
Short messages
Requirement:
Service n°10 "available".
Request:
The USIM seeks for the identified short message. If this message is found, the ME performs the
reading procedure with EFSMS.
If service n°10 is "available" and the status of the SMS is '1D' (status report requested, received
and stored in EFSMSR), the ME performs the reading procedure with the corresponding record in
EFSMSR. If the ME does not find a corresponding record in EFSMSR, then the ME shall update the
status of the SMS with '15' (status report requested, received but not stored in EFSMSR).
If the short message is not found within the USIM memory, the USIM indicates that to the ME.
Update:
The ME looks for the next available area to store the short message. If such an area is available, it
performs the updating procedure with EFSMS.
If there is no available empty space in the USIM to store the received short message, a specific
MMI will have to take place in order not to loose the message.
Erasure:
The ME will select in the USIM the message area to be erased. Depending on the MMI, the
message may be read before the area is marked as "free". After performing the updating procedure
with EFSMS, the memory allocated to this short message in the USIM is made available for a new
incoming message. The memory of the USIM may still contain the old message until a new
message is stored in this area.
If service n°11 is "available" and the status of the SMS is '1D' (status report requested, received
and stored in EFSMSR), the ME performs the erasure procedure for EFSMSR with the corresponding
record in EFSMSR.
5.3.4
Advice of charge
Requirement:
Service n°13 "available".
Accumulated Call Meter.
Request:
The ME performs the reading procedure with EFACM. The USIM returns the last updated value of
the ACM.
Initialisation:
The ME performs the updating procedure with EFACM using the new initial value.
Increasing:
The ME performs the increasing procedure with EFACM sending the value which has to be added.
Accumulated Call Meter Maximum Value.
Request:
The ME performs the reading procedure with EFACMmax.
Initialisation:
The ME performs the updating procedure with EFACMmax using the new initial maximum value.
Price per Unit and Currency Table (PUCT).
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
206
Request:
The ME performs the reading procedure with EFPUCT.
Update:
The ME performs the updating procedure with EFPUCT.
5.3.5
ETSI TS 131 102 V13.3.0 (2016-04)
Capability configuration parameters
Requirement:
Service n°14 "available".
Request:
The ME performs the reading procedure with EFCCP2.
Update:
The ME performs the updating procedure with EFCCP2.
Erasure:
The ME sends the identification of the requested information to be erased. The content of the
identified record in EFCCP2 is marked as "free".
5.3.6
User controlled PLMN selector with Access Technology
Requirement:
Service n°20 "available".
Request:
The ME performs the reading procedure with EFPLMNwACT.
Update:
The ME performs the updating procedure with EFPLMNwACT.
5.3.7
Cell broadcast message identifier
Requirement:
Service n°15 "available".
Request:
The ME performs the reading procedure with EFCBMI.
Update:
The ME performs the updating procedure with EFCBMI.
5.3.8
Group identifier level 1
Requirement:
Service n°17 "available".
Request:
The ME performs the reading procedure with EFGID1.
5.3.9
Group identifier level 2
Requirement:
Service n°18 "available".
Request:
The ME performs the reading procedure with EFGID2.
5.3.10
Service provider name
Requirement:
Service n°19 "available".
Request:
The ME performs the reading procedure with EFSPN.
5.3.11
Enhanced multi level precedence and pre-emption service
Requirement:
Service n°24 "available".
Request:
The ME performs the reading procedure with EFeMLPP.
5.3.12
Cell broadcast message identifier ranges
Requirement:
Service n°16 "available".
Request:
The ME performs the reading procedure with EFCBMIR.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
Update:
5.3.13
207
ETSI TS 131 102 V13.3.0 (2016-04)
The ME performs the updating procedure with EFCBMIR.
Short message status report
Requirement:
Service n°11 "available".
Request:
If the status of a stored short message indicates that there is a corresponding status report, the ME
performs the reading procedure on the records of EFSMSR and identifies the record containing the
appropriate status report.
Update:
If a status report is received, the ME first seeks within the SMS record identifiers of EFSMSR for the
same record number it used for the short message in EFSMS. If such a record identifier is found in
EFSMSR, it is used for storage. If such a record identifier is not found, then the ME seeks for a free
entry in EFSMSR for storage. If no free entry is found the ME runs the Purge procedure with
EFSMSR. If there is still no free entry, the status report is not stored.
If the ME found an appropriate record in EFSMSR for storage, it updates the record with the status
report setting the record identifier in EFSMSR to the appropriate record number of the short message
in EFSMS.
The status in EFSMS is updated accordingly by performing the update procedure with EFSMS.
Erasure:
The ME runs the update procedure with EFSMSR by at least storing '00' in the first byte of the
record. The ME may optionally update the following bytes with 'FF'.
Purge:
The ME shall read the SMS record identifier (byte 1) of each record of EFSMSR. With each record
the ME checks the corresponding short messages in EFSMS. If the status (byte 1) of the
corresponding SMS is not equal '1D' (status report requested, received and stored in EFSMSR), the
ME shall perform the erasure procedure with the appropriate record in EFSMSR.
5.3.14
APN Control List
Requirement:
Service n°35 "available".
Request:
The ME performs the reading procedure with EFACL.
Update:
The ME performs the updating procedure with EFACL.
Enabling:
The ME activates service n°3 in EFEST (bit n°3 set to "1").
Disabling:
The ME deactivates service n°3 in EFEST (bit n°3 set to "0").
When the APN Control List service is enabled, the ME shall check that the entire APN of any PDP context is listed in
EFACL before requesting this PDP context activation from the network. If the APN is not present in EFACL, the ME shall
not request the corresponding PDP context activation from the network.
In the case that the APN Control List is enabled and no APN is indicated in the PDP context request, indicating that a
network provided APN is to be used, then the ME shall only request the PDP context activation if "network provided
APN" is contained within EFACL.
If the APN Control List service is enabled and the ME is to provide an APN as part of attach for PDN connectivity, then
the ME shall verify that the APN value is present in the EFACL and if it is not the ME shall not proceed with the attach
procedure. If the APN Control List service is enabled and the ME does not indend to provide an APN as part of the
attach for PDN connectivity and use a network provided APN, the ME shall not check if "network provided APN" is
contained within EFACL.
5.3.15
Depersonalisation Control Keys
Requirement:
Service n°36 "available".
Request:
The ME performs the reading procedure with EFDCK.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
5.3.16
208
Co-operative Network List
Requirement:
Service n°37 "available".
Request:
The ME performs the reading procedure with EFCNL.
5.3.17
CPBCCH information
Requirement:
Service n°39 "available".
Request:
The ME performs the reading procedure with EFCPBCCH.
Update:
The ME performs the updating procedure with EFCPBCCH.
5.3.18
Investigation Scan
Requirement:
Service n°40 "available".
Request:
The ME performs the reading procedure with EFInvScan.
5.3.19
Enabled Services Table Request
Requirement:
Service n°2, 6, 34 or 35 "available".
Request:
The ME performs the reading procedure with EFEST.
Update:
The ME performs the updating procedure with EFEST.
5.3.20
Operator controlled PLMN selector with Access Technology
Requirement:
Request:
5.3.21
ETSI TS 131 102 V13.3.0 (2016-04)
Service n°42 "available".
The ME performs the reading procedure with EFOPLMNwACT
HPLMN selector with Access Technology
Requirement:
Service n°43 "available".
Request:
The ME performs the reading procedure with EFHPLMNwACT
5.3.22
Automatic Answer on eMLPP service
Requirement:
Service n°25 "available"
Request:
The ME performs the reading procedure with EFAaeM.
Update:
The ME performs the updating procedure with EFAaeM.
5.3.23
Network Parameter information
Request:
The ME performs the reading procedure with EFNETPAR.
Update:
The ME performs the updating procedure with EFNETPAR.
5.3.24
PLMN network name
Requirement:
Service n°45 "available".
Request:
The ME performs the reading procedure with EFPNN.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
5.3.25
209
ETSI TS 131 102 V13.3.0 (2016-04)
Operator PLMN List
Requirement:
Service n°46 "available".
Request:
The ME performs the reading procedure with EFOPL
5.3.26
Message Waiting Indication
Requirement:
Service n°48 "available".
Request:
The ME performs the reading procedure with EFMWIS.
Update:
The ME performs the updating procedure with EFMWIS.
5.3.27
Call Forwarding Indication Status
Requirement:
Service n°49 "available".
Request:
The ME performs the reading procedure with EFCFIS.
Update:
The ME performs the updating procedure with EFCFIS.
5.3.28
Service Provider Display Information
Requirement:
Service n°19 and 51 are "available".
Request:
The ME performs the reading procedure with EFSPDI.
Update:
The ME performs the updating procedure with EFSPDI.
5.3.29
MMS Notifications
Requirement:
Service n°52 "available".
Request:
The ME sends the identification of the information to be read, then the ME performs the reading
procedure with EFMMSN. If Service n°53 is available the ME shall analyse the data of EFMMSN to
ascertain, whether additional data is associated in EFEXT8. If necessary, then the ME performs the
reading procedure on EFEXT8 to assemble the complete MMS notification.
Update:
The ME analyses and assembles the MMS notification to be stored as follows:
- if the MMS notification contains not more bytes than the maximum possible number for EFMMSN then the ME
looks for the next available area to store the MMS notification. If such an area is available, it performs the updating
procedure with EFMMSN.
- if the MMS notification contains more bytes than the maximum possible number for EFMMSN then the ME seeks
for a sufficient number of free records in EFEXT8 to store the complete MMS notification.
-
If there is not a sufficient number of EFEXT8 records marked as "free" to store the complete MMS
notification, the procedure is aborted.
-
Otherwise, the ME performs the updating procedure and stores as many bytes as possible in EFMMSN. The
Extension file record number of EFMMSN is coded with the associated record number in the EFEXT8. The
remaining bytes are stored in the selected EFEXT8 record where the type of the record is then set to
"additional data". The second byte of the EFEXT8 record is set with the number of bytes of the remaining
additional data. It is possible, if the number of additional digits exceeds the capacity of the additional
record, to chain another record inside the EFEXT8 by the identifier in the last byte of the record. In this case
byte 2 of each record for additional data within the same chain indicates the number of bytes within the
same record.
The ME is only allowed to store extension data in unused records of EFEXT8
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
210
ETSI TS 131 102 V13.3.0 (2016-04)
If there is no available empty space in the USIM to store the MMS notification, it is up to ME
implementation how the notification is handled.
Erasure:
5.3.30
The ME will select in the USIM the MMS notification to be erased. Depending on the MMI, the
MMS notification may be read before the area is marked as "free". The memory of the USIM may
still contain the old MMS notification until a new message is stored. If Service n°53 is available all
associated records in EFEXT8 are then marked by the ME as "free" by setting them to 'FF'.
MMS Issuer Connectivity Parameters
Requirement:
Service n°52 "available".
Request:
the ME performs the reading procedure with EFMMSICP.
Update:
The ME performs the updating procedure with EFMMSICP.
5.3.31
MMS User Preferences
Requirement:
Service n°52 "available".
Request:
the ME performs the reading procedure with EFMMSUP.
Update:
The ME performs the updating procedure with EFMMSUP.
5.3.32
MMS User Connectivity Parameters
Requirement:
Service n°52 and n°55 "available".
Request:
the ME performs the reading procedure with EFMMSUCP.
Update:
The ME performs the updating procedure with EFMMSUCP.
5.3.33
Network's indication of alerting
Requirement:
Service n°56 "available".
Request:
The ME performs the reading procedure with EFNIA.
5.3.34
Multimedia Messages Storage
If the terminal supports Multimedia Message Storage on the USIM, then the following procedures apply.
As defined in TS 23.140 [38] a Multimedia Message consists of content, or multimedia objects, and headers to describe
various properties of that content. An MM is stored in EFMMDF, a BER-TLV structured file.
A list of multimedia messages is stored in the BER-TLV file EFMMLwhere each data object identifies one Multimedia
Message stored in EFMMDF.
Prerequisite:
Service n°67 "available".
Request:
The ME performs the reading procedures on EFMML to verify the presence and to get the location
information of the targeted MM. Then the ME performs the reading procedure of the EFMMDF file
to get the MM.
Update:
The ME chooses a free identity (i.e. not listed in EFMML) for the multimedia message and check for
available space in the EFMMDF file. This procedure could be done for each update or once at the
startup of the UE and after a REFRESH command involving one of the DFMULTIMEDIA files. Then
the ME performs the following procedures:
If there is no available empty space in the EFMMDF file to store the MM, the procedure is aborted
and the user is notified.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
211
ETSI TS 131 102 V13.3.0 (2016-04)
Else, the ME stores the MM in EFMMDF, then updates the information in EFMML accordingly.
Erasure:
5.3.35
After a successful deletion of an MM in EFMMDF the terminal updates the information in EFMML
accordingly.
Equivalent HPLMN Presentation Indication request
Requirement:
Service n°73 "available".
Request:
The ME performs the reading procedure with EFEHPLMNPI.
5.3.36
NAF Key Centre Address request
Requirement:
Service n°68 and service n°76 "available".
Request:
The ME performs the reading procedure with EFNAFKCA.
5.3.37
Service provider name Icon
Requirement:
Service n°19 and service n°78 "available".
Request:
The ME performs the reading procedure with EFSPN and EFSPNI.
5.3.38
PLMN network name Icon
Requirement:
Service n°45 and service n°79 "available".
Request:
The ME performs the reading procedure with EFPNN and EFPNNI.
5.3.39
ICE Information request
The ICE information shall be accessible even when the security features of the UE or UICC have been enabled. The
ICE access procedure is described in TS 22.030 [4]. The terminal shall discover that the ICE feature is supported by the
ability to select one of the ICE files i.e. EFICE_DN, EFICE_FF or EFICE_graphics.
Request:
The terminal performs the read procedure with EFICE_DN and/or EFICE_FF and/or
EFICE_graphics.
Update:
The terminal performs the update procedure with EFICE_DN and/or EFICE_FF and/or
EFICE_graphics.
Disable ICE display: The terminal performs the deactivate procedure consecutively on all the supported files
(EFICE_DN, EFICE_FF and EFICE_graphics).
Enable ICE display: The terminal performs the activate procedure consecutively on all the supported files (EFICE_DN,
EFICE_FF and EFICE_graphics ).
The content of the EFICE_DN, EFICE_FF and EFICE_graphics shall be preserved when enabling and disabling the ICE display.
5.3.40
eCall Related Procedures
The eCall feature on the USIM provides two numbers, a test number and a reconfiguration number, to the terminal to be
used with the eCall. eCall support on the USIM is indicated in the service table when service '89' is "available".
Depending on the type of eCall support, EFFDN or EFSDN is used to provide the eCall functionality.
5.3.40.1
eCall Only support
Requirement:
Service n° 89 and Service n° 2 are "available" and FDN service is enabled in EFEST.
Request:
The ME performs the reading procedure with EFFDN.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
212
ETSI TS 131 102 V13.3.0 (2016-04)
If eCall only calls are supported, then EFFDN shall only contain two entries. The first entry shall contain the eCall test
number and the second entry shall contain the eCall reconfiguration number. A terminal in eCall only mode performs
the FDN related procedures.
5.3.40.2
eCall and Normal call support
Requirement:
Service n° 89 and Service n° 4 are "available".
Request:
The ME performs the reading procedure with EFSDN.
If eCall and normal calls are supported, then the last two entries of EFSDN shall contain the eCall test number and the
eCall reconfiguration number respectively. A terminal in eCall and normal mode performs the SDN related procedures.
5.3.41
SM-over-IP
Requirement:
Service n°12 and n°91 "available".
Request:
the ME performs the reading procedure with EFPSISMSC.
Update:
The ME performs the updating procedure with EFPSISMSC.
5.3.42
UICC access to IMS
Requirement:
Service n°95 is "available" and the ISIM application defined in TS 31.103 [64] is not present on
the UICC.
Request:
The terminal performs the reading procedure with EFUICCIARI.
The procedures and command for "UICC access to IMS" are defined in TS 31.111 [12]. An ME supporting UICC
access to IMS shall perform the reading procedure with EFUICCIARI prior to sending a registration to the IMS.
5.4
USAT related procedures
5.4.1
Data Download via SMS-PP
Requirement:
USIM Service n°28 "available".
The procedures and commands for Data Download via SMS-PP are defined in TS 31.111 [12].
5.4.2
Image Request
The terminal sends the identification of the information to be read. The terminal shall analyse the data of EFIMG to
identify the files containing the instances of the image. If necessary, then the terminal performs READ BINARY
commands on these files to assemble the complete image instance data.
5.4.3
Data Download via SMS-CB
Requirement:
USIM Service n°29 "available".
The ME shall perform the reading procedure with EFCBMID, and add the message identifiers to the Cell Broadcast search
list. On receiving a cell broadcast message the procedure defined in TS 31.111 [12] applies.
5.4.4
Call Control by USIM
Requirement:
USIM Service n°30 "available".
The procedures and commands for Call Control by USIM are defined in TS 31.111 [12]. It is mandatory for the ME to
perform the procedures if it has indicated that it supports Call Control by USIM in the TERMINAL PROFILE
command.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
5.4.5
213
ETSI TS 131 102 V13.3.0 (2016-04)
MO-SMS control by USIM
Requirement:
USIM Service n°31 "available".
The procedures and commands for MO-SMS control by USIM are defined in TS 31.111 [12]. It is mandatory for the
ME to perform the procedures if it has indicated that it supports MO-SMS control by USIM in the TERMINAL
PROFILE command.
5.4.6
Data Download via USSD and USSD application mode
Requirement:
Service n°70 "available".
The procedures and commands for Data Download via USSD and USSD application mode are defined in
TS 31.111 [12].
5.4.7
Additional TERMINAL PROFILE after UICC activation
Requirement:
USIM Service n°72 "available".
The procedures and commands for Additional TERMINAL PROFILE after UICC activation are defined in
TS 31.111 [12] and allow the ME to send multiple Terminal Profile downloads.
5.4.8
Terminal Applications
Requirement:
Service n°77 "available"
The procedures and commands for "Terminal Applications" are defined in TS 31.111 [12]
5.4.9
Call control on EPS PDN connection by USIM
Requirement:
USIM Service n°87 "available".
The procedures and commands for Call control on EPS PDN connection by USIM are defined in TS 31.111 [12].
5.4.10
Communication Control for IMS by USIM
Requirement:
USIM Service n°93 "available".
The procedures and commands for Communication Control for IMS by USIM are defined in TS 31.111 [12]. It is
mandatory for the ME to perform the procedures if it has indicated that it supports Communication Control for IMS by
USIM in the TERMINAL PROFILE command.
5.4.11
USAT Facility Control
Requirement:
The ME supports the USAT over AT feature specified in TS 31.111 [12].
Request:
The ME performs the reading procedures of EFUFC.
5.4.12
Extended Terminal Applications
Requirement:
Service n°77 and n°94 "available"
The procedures and commands for "Extended Terminal Applications" are defined in TS 31.111 [12].
5.4.13
USAT application pairing procedure
The use of a USIM can be restricted to specific MEs using the USAT Application Pairing procedure and information
stored in the USIM as specified in this specification and defined in 3GPP TS 33.187 [76].
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
214
ETSI TS 131 102 V13.3.0 (2016-04)
To support the USAT Application Pairing procedure, the ME shall support USAT PROVIDE LOCAL INFORMATION
command (IMEI or IMEISV), as specified in 3GPP TS 31.111 [12].
USAT Application Pairing is successful when the IMEI or IMEISV retrieved from the terminal belongs to a range of
values the UICC is configured with in EFIWL.
EFIWL, EFIPS, EFIPD are defined in this document to support this procedure.
If the service n°102 is "available" in the USIM Service Table, the UICC shall start the UICC proactive session
immediately after TERMINAL PROFILE and the first proactive command shall be PROVIDE LOCAL
INFORMATION with IMEI or IMEISV. The ME shall respond with TERMINAL RESPONSE with IMEI or IMEISV
before performing any AUTHENTICATE command.
The UICC shall respond to any AUTHENTICATE command with error status words SW1 SW2 = '69 85' if:
-
IMEI or IMEISV provided by the ME is not in the corresponding white list configured in the USIM (EFIWL)
-
ME has not provided any IMEI
If the AUTHENTICATE command had been executed before the pairing procedure has been successfully performed (in
the case of pre-Rel-12 MEs), the UICC may need to trigger a network attachment procedure by sending a proactive
command REFRESH(3G SESSION RESET).
5.5
MexE related procedures
MexE is an optional feature. The higher level procedures, and contents and coding of the commands are given in
TS 23.057 [30]. Procedures relating to the transmission of commands and responses across the USIM/ME interface are
given in this clause. A USIM or ME supporting MexE shall conform to the requirements given in this clause.
5.5.1
MexE ST
Requirement:
Service n°41 (MexE) "available".
Request:
The ME performs the reading procedure with EFMexE-ST
5.5.2
Operator root public key
Requirement:
Service n°41 (MexE) "available" and MexE ST service n°1 (EFORPK) "available".
Request:
The ME performs the reading procedure with EFORPK. The ME shall analyse the data of EFORPK
(clause 4.4.1.4.2) to identify the files containing the certificate instances. If necessary, then the ME
performs READ BINARY commands on these files to assemble the complete certificate instance
data.
5.5.3
Administrator root public key
Requirement:
Service n°41 (MexE) "available" and MexE ST service n°2 (EFARPK) "available".
Request:
The ME performs the reading procedure with EFARPK. The ME shall analyse the data of EFARPK
(clause 4.4.1.4.3) to identify the file containing the certificate instance. If necessary, then the ME
performs READ BINARY commands on this file to assemble the complete certificate instance
data.
5.5.4
Third Party root public key(s)
Requirement:
Service n°41 (MexE) "available" and MexE ST service n°3 (EFTPRPK) "available".
Request:
The ME performs the reading procedure with EFTPRPK. The ME shall analyse the data of EFTPRPK
(clause 4.4.1.4.4) to identify the files containing the certificate instances. If necessary, then the ME
performs READ BINARY commands on these files to assemble the complete certificate instance
data.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
5.5.5
215
ETSI TS 131 102 V13.3.0 (2016-04)
Trusted Key/Certificates Data Files
Requirement:
Service n°41 (MexE) "available".
Request:
The ME performs the reading procedure with EFTKCDF. The ME shall analyse the data of EFTKCDF
and, if necessary, perform READ BINARY commands on these files
5.6
WLAN related procedures
5.6.1
WLAN Selection related Procedures
Requirement:
service n°62 or n°63 or n°81 or n°82 or n°83 or n°84 or n°88 "available"
The ME shall read the User, Home and Operator controlled WSIDs, the I-WLAN Equivalent HPLMN Presentation
Indication, I-WLAN HPLMN Priority Indication, the I-WLAN Last Registered PLMN and the HPLMN Direct Access
Indicationfrom the corresponding list files (i.e. EFUWSIDL, EFHWSIDL, EFOWSIDL, EFWEHPLMNPI , EFWLRPLMN, EFWHPI and
EFHPLMDAI)to perform WLAN selection procedures as described in TS 24.234 [40].
The user may change the User controlled WSIDs.
5.6.2
WLAN PLMN Selection related procedures
Requirement:
service n°60 or nº61 "available"
The ME shall read the User controlled PLMN selector and/or Operator controlled PLMN selector in EFUPLMNWLAN and
EFOPLMNWLAN respectively for WLAN PLMN Selection procedures as described in TS 24.234 [40].
The user may change the User controlled PLMN selector for WLAN.
5.6.3
WLAN access authentication related procedures
Requirement:
service n°59 "available"
When the ME tries a full authentication, it shall inspect if a valid Pseudonym is available in EFPseudo.and use it as the
user name portion of the NAI for WLAN access authentication following the procedures described in TS 24.234 [40].
The ME shall manage pseudonyms as defined in TS 24.234 [40].
5.6.4
WLAN access re-authentication related procedures
Requirement:
service n°66 "available"
When the ME tries a fast re-authentication, it shall inspect if a valid reauthentication identity is available in EFWRI and
use it as the user name portion of the NAI for WLAN access re-authentication following the procedures described in
TS 24.234 [40].
The ME shall manage re-authentiction identities, Master Key and counter values as described in TS 24.234 [40].
5.7
Network Connectivity Parameters for UICC IP connections related
procedures
The EFNCP-IP access procedures are described in ETSI TS 102 483 [50].
Request:
The terminal performs the read procedure with EFNCP-IP before establishing a remote data link for
UICC remote IP connectivity as described in ETSI TS 102 483 [50].
Refresh: The terminal performs the refresh procedure with EFNCP-IP.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
216
5.8
H(e)NB related procedures
5.8.1
CSG Access Control procedures
Requirement:
Service n°86 is "available"
Request:
The terminal performs the read procedure with EFACSGL.
Update:
The terminal performs the updating procedure with EFACSGL
ETSI TS 131 102 V13.3.0 (2016-04)
The ME shall read the allowed CSG Ids from EFACSGL in order to perform H(e)NB selection procedures. The lists in
EFACSGL shall take precedence over the list stored in the ME non-volatile memory.
Requirement:
Service n°90 is "available"
Request:
The terminal performs the read procedure with with EFOCSGL.
The ME shall read the Operator CSG Ids from EFOCSGL in order to perform H(e)NB selection procedures. The list in
EFOCSGL shall take precedence over the list stored in the ME non-volatile memory.
Requirement:
Service n°92 is "available"
In case of a manual CSG cell selection, the ME shall read EFAD and CSG Lists Display Indicators from EFOCSGL and
display CSG Ids accordingly. The configuration in EFOCSGL shall take precedence over the configuration stored in the
ME non-volatile memory.
If service n°92 is not "available", in case of a manual CSG cell selection, all available CSGs may be displayed without
any restriction.
5.8.2
CSG Type related procedures
Requirement:
Service n°86 is "available"
Request:
The terminal performs the read procedure with EFACSGL and EFCSGT.
Update:
The terminal performs the updating procedure with EFACSGL
The ME shall discover the association between the selected CSG ID and a CSG Type from EFACSGL. If this association
exists, the provided CSG Type shall be displayed.
Requirement:
Service n°90 is "available"
Request:
The terminal performs the read procedure with EFOCSGL and EFOCSGT.
The ME shall discover the association between the selected CSG ID and either a CSG Type from EFACSGL or an
Operator CSG Type from EFOCSGL. The Operator CSG Type has precedence.
5.8.3
HNB name display related procedures
Requirement:
Service n°86 is "available"
Request:
The terminal performs the read procedure with EFACSGL and EFHNBN.
Update:
The terminal performs the updating procedure with EFACSGL and EFHNBN.
The ME shall discover the association between the selected CSG ID and a HNB name from EFACSGL. If this association
exists, the provided HNB name shall be displayed.
Requirement:
Service n°90 is "available"
Request:
The terminal performs the read procedure with EFOCSGL and EFOHNBN.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
217
ETSI TS 131 102 V13.3.0 (2016-04)
The ME shall discover the association between the selected CSG ID and either a HNB Name from EFACSGL or an
Operator HNB from EFOCSGL. The Operator HNB Name has precedence. If this association exists, the HNB Name shall
be displayed.
Requirement:
Service n°92 is "available"
In case of a manual CSG cell selection, the ME shall read EFAD and the CSG Lists Display Indicators from EFOCSGL and
display HNB Name accordingly. The configuration in EFOCSGL shall take precedence over the configuration stored in the
ME non-volatile memory.
If service n°92 is not "available", in case of a manual CSG cell selection, all available CSGs may be displayed without
any restriction.
5.9
ProSe related procedures
5.9.1
ProSe Direct Discovery Provisioning parameters
Requirement:
service n°1 is "available" in the ProSe Service Table.
Request:
The ME performs the reading procedure with EFPROSE_MON. and EFPROSE_ANN.
5.9.2
HPLMN ProSe Function address
Requirement:
service n°2 is "available" in the ProSe Service Table.
Request:
The ME performs the reading procedure with EFPROSEFUNC.
5.9.3
ProSe direct communication related Procedures
Requirement:
service n°3 is "available" in the ProSe Service Table and "Prose services for Public Safety" is
enabled in EFAD or the ME received service authorization from the ProSe Function.
Request:
The ME performs the reading procedure with EFPROSE_RADIO_COM.
5.9.4
ProSe direct discovery related Procedures
Requirement:
service n°4 is "available" in the ProSe Service Table and "Prose services for Public Safety" is
enabled in EFAD or the ME received service authorization from the ProSe Function.
Request:
The ME performs the reading procedure with EFPROSE_RADIO_MON.
Requirement:
service n°5 is "available" in the ProSe Service Table and "Prose services for Public Safety" is
enabled in EFAD or the ME received service authorization from the ProSe Function.
Request:
The ME performs the reading procedure with EFPROSE_RADIO_ANN.
5.9.5
ProSe direct communication related Procedures
Requirement:
service n°6 is "available" in the ProSe Service Table and "Prose services for Public Safety" is
enabled in EFAD or the ME received service authorization from the ProSe Function.
Request:
The ME performs the reading procedure with EFPROSE_POLICY.
5.9.6
ProSe direct communication related Procedures
Requirement:
service n°3 is "available" in the ProSe Service Table and "Prose services for Public Safety" is
enabled in EFAD or the ME received service authorization from the ProSe Function
Request:
The ME performs the reading procedure with EFPROSE_PLMN.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
5.9.7
218
ETSI TS 131 102 V13.3.0 (2016-04)
ProSe Group Counter related Procedures
Requirement:
service n°7 is "available" in the ProSe Service Table.
Request:
The ME performs the reading procedure with EFPROSE_GC. The content from the USIM shall be
combined with that one from the non-volatile memory on the ME, with USIM taking precedence
in case the same group is available in both.
Update:
The ME performs the updating procedure with EFPROSE_GC. If the EF does not have free space, the
ME shall use the non-volatile memory on the ME.
The ME is responsible to remove entries no longer used from the EFPROSE_GC in order to guarantee
that EF is not filled with unnecessary entries.
5.9.8
ProSe Usage Information Reporting Configuration related
Procedures
Requirement:
service n°8 is "available" in the ProSe Service Table.
Request:
The ME performs the reading procedure with EFPROSE_UIRC. The content from the USIM shall be
used by the ME to construct the content of the usage information report according the procedures
defined in TS 24.334[70], with the USIM configuration parameters taking precedence in case the
usage information reporting configuration parameters have also been provisioned in the ME.
5.9.9
ProSe Group Member Discovery related Procedures
Requirement:
service n°10 is "available" in the ProSe Service Table and "Prose services for Public Safety" is
enabled in EFAD or the ME received service authorization from the ProSe Function.
Request:
The ME performs the reading procedure with EFPROSE_GM_DISCOVERY.
5.9.10
ProSe Relay related Procedures
Requirement:
service n°11 is "available" in the ProSe Service Table and "Prose services for Public Safety" is
enabled in EFAD or the ME received service authorization from the ProSe Function.
Request:
The ME performs the reading procedure with EFPROSE_RELAY and EFPROSE_RELAY_DISCOVERY.
5.10
ePDG Selection related procedures
5.10.1
Home ePDG Identifier
Requirement:
service n°106 and n°107 are "available" in the USIM Service Table.
Request:
The ME performs the reading procedure with EFePDGId. The UE then shall use the Home ePDG
identifier(s) present in the EFePDGId to perform the ePDG selection procedure as defined in
3GPP TS 24.302 [79].
If EFePDGId and EFePDGSelection are empty, the UE shall consider "ePDG configuration information is
configured but empty", then the UE shall follow the procedure specified in the "Selection of the
ePDG" UE procedure as defined in 3GPP TS 24.302 [79].
5.10.2
ePDG Selection Information
Requirement:
service n°106 and n°107 are "available" in the USIM Service Table.
Request:
The ME performs the reading procedure with EFePDGSelection. The UE then shall use the ePDG
selection information present in the EFePDGSelection to perform the ePDG selection procedure as
defined in 3GPP TS 24.302 [79].
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
219
ETSI TS 131 102 V13.3.0 (2016-04)
If EFePDGId and EFePDGSelection are empty, the UE shall consider "ePDG configuration information is
configured but empty", then the UE shall follow the procedure specified in the "Selection of the
ePDG" UE procedure as defined in 3GPP TS 24.302 [79].
5.10.3
ePDG configuration information configured but empty
Requirement:
service n°106 is "available" and service n°107 is not "available" in the USIM Service Table.
Request:
The UE shall consider "ePDG configuration information is configured but empty", then the UE
shall follow the procedure specified in the "Selection of the ePDG" UE procedure as defined in
3GPP TS 24.302 [79].
5.11
ACDC related procedures
5.11.1
ACDC Configuration
Requirement:
service n°108 is "available".
Request:
The ME performs the reading procedure with EFACDC.
5.12
MCPTT related procedures
5.12.1
MCPTT UE configuration
Requirement:
service n°1 is "available" in the MCPTT Service Table.
Request:
The ME performs the reading procedure with EFMCPTT_UE_CONFIG.
5.12.2
MCPTT User configuration
Requirement:
service n°2 is "available" in the MCPTT Service Table.
Request:
The ME performs the reading procedure with EFMCPTT_USER_CONFIG.
5.12.3
MCPTT Group configuration
Requirement:
service n°3 is "available" in the MCPTT Service Table.
Request:
The ME performs the reading procedure with EFMCPTT_GROUP_CONFIG.
5.12.4
MCPTT Service configuration
Requirement:
service n°4 is "available" in the MCPTT Service Table.
Request:
The ME performs the reading procedure with EFMCPTT_SERVICE_CONFIG.
5.13
ePDG Selection for Emergency Services related
procedures
5.13.1
Emergency ePDG Identifier
Requirement:
service n°xxx and n°yyy are "available" in the USIM Service Table.
Request:
The ME performs the reading procedure with EFePDGIdEm. The UE then shall use the Emergency
ePDG identifier(s) present in the EFePDGIdEm to perform the ePDG selection procedure.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
220
ETSI TS 131 102 V13.3.0 (2016-04)
If EFePDGIdEm and EFePDGSelectionEm are empty, the UE shall consider that the ePDG configuration
information for Emergency Services is configured but empty.
5.13.2
ePDG Selection Information for Emergency Services
Requirement:
service n°xxx and n°yyy are "available" in the USIM Service Table.
Request:
The ME performs the reading procedure with EFePDGSelectionEm. The UE then shall use the ePDG
selection information for Emergency Services present in the EFePDGSelectionEm to perform the ePDG
selection procedure.
If EFePDGIdEm and EFePDGSelectionEm are empty, the UE shall consider that the ePDG configuration
information for Emergency Services is configured but empty.
5.13.3
ePDG configuration information for Emergency Services configured
but empty
Requirement:
service n°yyy is "available" and service n°xxx is not "available" in the USIM Service Table.
Request:
The UE shall consider the ePDG configuration information is configured but empty.
6
Security features
The security aspects of 3G are specified in TS 33.102 [13] and TS 33.103 [14]. This clause gives information related to
security features supported by the USIM to enable the following:
-
authentication of the USIM to the network;
-
authentication of the network to the USIM;
-
authentication of the user to the USIM;
-
data confidentiality over the radio interface;
-
file access conditions;
-
conversion functions to derive GSM parameters.
6.1
Authentication and key agreement procedure
This clause gives an overview of the authentication mechanism and cipher and integrity key generation which are
invoked by the network. For the specification of the corresponding procedures across the USIM/ME interface see
clause 5.
The mechanism achieves mutual authentication by the user and the network showing knowledge of a secret key K
which is shared between and available only to the USIM and the AuC in the user's HE. In addition, the USIM and the
HE keep track of counters SQNMS and SQNHE respectively to support network authentication. SQNHE is a counter in the
HLR/AuC, individual for each user and SQNMS denotes the highest sequence number the USIM has ever accepted.
When the SN/VLR initiates an authentication and key agreement, it selects the next authentication vector and sends the
parameters RAND and AUTN (authentication token) to the user. Each authentication token consists of the following
components: a sequence number SQN, an Authentication Management Field (AMF) and a message authentication code
MAC over the RAND, SQN and AMF.
The USIM checks whether AUTN can be accepted and, if so, produces a response RES which is sent back to the
SN/VLR. The SN/VLR compares the received RES with XRES. If they match the SN/VLR considers the authentication
and key agreement exchange to be successfully completed. The USIM also computes CK and IK. The established keys
CK and IK will be used by the ME to perform ciphering and integrity functions.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
221
ETSI TS 131 102 V13.3.0 (2016-04)
A permanent secret key K is used in this procedure. This key K has a length of 128 bits and is stored within the USIM
for use in the algorithms described below. Also more than one secret key K can be stored in the USIM. The active key
to be used by the algorithms is signalled within the AMF field in the AUTN.
6.2
Cryptographic Functions
The names and parameters of the cryptographic functions supported by the USIM are defined in TS 33.102 [13]. These
are:
f1:
f1*:
f2:
f3:
f4:
f5:
f5*:
a message authentication function for network authentication used to compute XMAC;
a message authentication function for support to re-synchronisation with the property that no
valuable information can be inferred from the function values of f1* about those of f1, ..., f5, f5*
and vice versa;
a message authentication function for user authentication used to compute SRES;
a key generating function to compute the cipher key CK;
a key generating function to compute the integrity key IK;
a key generating function to compute the anonymity key AK (optional);
a key generating function to compute AK in re-synchronisation procedures with the property that
no valuable information can be inferred from the function values of f5* about those of f1, f1*, f2,
..., f5 and vice versa.
These cryptographic functions may exist either discretely or combined within the USIM.
6.3
GSM Conversion Functions
To gain GSM access, the USIM provides the conversion functions c2 and c3. These functions derive the required GSM
parameters (SRES, cipher key Kc) from available 3G parameters.
6.4
User verification and file access conditions
The security architecture as defined in TS 31.101 [11] applies to the USIM application with the following definitions
and additions.
-
The USIM application shall use a global key reference as PIN and local key reference as PIN2. For access to
DFTELECOM the PIN shall be verified. Access with PIN2 is limited to the ADF(USIM).
-
The only valid values for the usage qualifier are '00' (verification requirement is not used) and '08' (user
authentication knowledge based (PIN)) as defined in ISO/IEC 7816-4 [20].
Disabling of PIN2 is allowed. This is, however, not the case if PIN2 is mapped to the CHV2 of a GSM application.
7
USIM Commands
7.1
AUTHENTICATE
7.1.1
Command description
The function can be used in several different contexts:
-
a 3G security context, when 3G authentication vectors (RAND, XRES, CK, IK, AUTN) are available (i.e. the
UE is located in the UTRAN, or in a GSM radio access network which is connected to a 3G or 3G capable
VLR/SGSN), or
-
a GSM security context, when GSM authentication data are available only (i.e. the UE is located in the GSM
radio access network which is connected to a non-3G capable VLR/SGSN)
-
a VGCS/VBS security context, when VGCS/VBS authentication data is available
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
222
ETSI TS 131 102 V13.3.0 (2016-04)
-
a GBA_U security context, when a GBA bootstrapping procedure is requested
-
a MBMS security context, when a MBMS security procedure is requested
-
a Local Key Establishment security context, when a Local Key Establishment procedure is requested.
The function is used in GSM or 3G security context during the procedure for authenticating the USIM to its HE and
vice versa. In addition, a cipher key and an integrity key are calculated. For the execution of the command the USIM
uses the subscriber authentication key K, which is stored in the USIM.
The function is used in VGCS/VBS security context during the procedure for retrieving the VGCS/VBS Short Term
Key (VSTK) used by the terminal in establishing VGCS/VBS calls.
The function is used in GBA security context in two different modes:
a) Bootstrapping Mode: during the procedure for mutual authenticating of the USIM and the Bootstrapping Server
Function (BSF) and for deriving bootstrapped key material from the AKA run.
b) NAF Derivation Mode: during the procedure for deriving Network Application Function (NAF) specific keys
from previous bootstrapped key material.
The function is used in MBMS security context in two different modes:
a) MSK Update Mode: during the procedure for updating an MBMS Service Key (MSK).
b) MTK Generation Mode: during the procedure for retrieving the MBMS Traffic Key (MTK) used by the terminal
to decrypt MBMS data.
The function is related to a particular USIM and shall not be executable unless the USIM application has been selected
and activated, and the current directory is the USIM ADF or any subdirectory under this ADF and a successful PIN
verification procedure has been performed (see clause 5).
7.1.1.1
3G security context
The USIM first computes the anonymity key AK = f5K (RAND) and retrieves the sequence number SQN = (SQN ⊕
AK) ⊕ AK.
Then the USIM computes XMAC = f1K (SQN || RAND || AMF) and compares this with the MAC which is included in
AUTN. If they are different, the USIM abandons the function.
Next the USIM verifies that the received sequence number SQN is previously unused. If it is unused and its value is
lower than SQNMS, it shall still be accepted if it is among the last 32 sequence numbers generated. A possible
verification method is described in TS 33.102 [13].
NOTE:
This implies that the USIM has to keep a list of the last used sequence numbers and the length of the list
is at least 32 entries.
If the USIM detects the sequence numbers to be invalid, this is considered as a synchronisation failure and the USIM
abandons the function. In this case the command response is AUTS, where:
AUTS = Conc(SQNMS) || MACS;
Conc(SQNMS) = SQNMS ⊕ f5*K(RAND) is the concealed value of the counter SQNMS in the USIM; and.
MACS = f1*K(SQNMS || RAND || AMF) where:
RAND is the random value received in the current user authentication request;
the AMF assumes a dummy value of all zeroes so that it does not need to be transmitted in clear in the
resynchronisation message.
If the sequence number is considered in the correct range, the USIM computes RES = f2K (RAND), the cipher key
CK = f3K (RAND) and the integrity key IK = f4K (RAND) and includes these in the command response. Note that if this
is more efficient, RES, CK and IK could also be computed earlier at any time after receiving RAND.
The use of AMF is HE specific and while processing the command, the content of the AMF has to be interpreted in the
appropriate manner. The AMF may e.g. be used for support of multiple algorithms or keys or for changing the size of
lists, see TS 33.102 [13].
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
223
ETSI TS 131 102 V13.3.0 (2016-04)
If Service n°27 is "available", the USIM calculates the GSM response parameter KC, using the conversion function
defined in TS 33.102 [13].
Input:
-
RAND, AUTN (AUTN:= SQN ⊕ AK || AMF || MAC).
Output:
-
RES, CK, IK if Service n°27 is "not available".
Or
-
RES, CK, IK, KC if Service n°27 is "available".
Or
-
AUTS.
7.1.1.2
GSM security context
USIM operation in an GSM security context is supported if Service n°38 is "available".
The USIM computes RES = f2K (RAND), the cipher key CK = f3K (RAND) and the integrity key IK = f4K (RAND).
Next the USIM calculates the GSM response parameters SRES and KC, using the conversion functions defined in
TS 33.102 [13].
Input:
-
RAND.
Output:
-
SRES; KC.
7.1.1.3
VGCS/VBS security context
USIM operation in a VGCS/VBS security context is supported if both Service n°57 and Service n°64 are 'available'
(VGCS security context) or if both Service n°58 and Service n°65 are "available" (VBS security context).
The USIM computes the Short Term Key (VSTK) associated with a particular VGCS/VBS Group Identifier
(Group_Id). For this computation, the USIM uses the Voice Group (for VGCS) or Broadcast Group (for VBS) Key
(V_Ki) identified by their respective Group_Id and Master Group Key Identifier (VK_Id). The USIM retrieves the
Group_Id and the service flag (VGCS or VBS) from the received Voice Service Identifier (Vservice_Id).
NOTE:
The Group_Id has a variable length according to TS 43.068 [46].
The USIM shall first search if the Group_Id corresponds to a stored VGCS Group Identifier in EFVGCS or a stored VBS
Group Identifier in EFVBS.
Then, the USIM shall retrieve the V_Ki corresponding to the given Group_Id and VK_Id.
Then the USIM uses V_Ki and VSTK_RAND as input parameters for the A8_V key derivation function (as defined in
TS 43.020 [44]) in order to compute and returns VSTK.
Input:
-
Vservice_Id, VK_Id, VSTK_RAND
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
224
ETSI TS 131 102 V13.3.0 (2016-04)
Output:
-
VSTK.
7.1.1.4
GBA security context (Bootstrapping Mode)
USIM operations in GBA security context are supported if service n°68 is "available".
The USIM receives the RAND and AUTN*. The USIM first computes the anonymity key AK = f5K (RAND) and
retrieves the sequence number SQN = (SQN ⊕ AK) ⊕ AK.
The USIM calculates IK = f4K (RAND) and MAC (by performing the MAC modification function described in
TS 33.220 [42]). Then the USIM computes XMAC = f1K (SQN || RAND || AMF) and compares this with the MAC
previously produced. If they are different, the USIM abandons the function.
Then the USIM performs the checking of AUTN* as in UMTS security context. If the USIM detects the sequence
numbers to be invalid, this is considered as a synchronisation failure and the USIM abandons the function. In this case
the command response is AUTS, which is computed as in UMTS security context.
If the sequence number is considered in the correct range, the USIM computes RES = f2K (RAND) and the cipher key
CK = f3K (RAND).
The USIM then derives and stores GBA_U bootstrapped key material from CK, IK values. The USIM shall also stores
RAND in the RAND field of EFGBABP
The USIM stores GBA_U bootstrapped key material from only one bootstrapping procedure. The previous bootstrapped
key material, if present, shall be replaced by the new one. This key material is linked with the data contained in EFGBABP
: RAND, which is updated by the USIM and B-TID, which shall be further updated by the ME.
NOTE:
According to TS 33.220 [42], NAF-specific keys that may be stored on the USIM are not affected by this
bootstrapping operation.
RES is included in the command response after flipping the least significant bit.
Input:
-
RAND, AUTN*
Output:
-
RES
or
-
AUTS
7.1.1.5
GBA security context (NAF Derivation Mode)
USIM operations in GBA security context are supported if service n°68 is "available".
The USIM receives the NAF_ID and IMPI.
The USIM performs Ks_ext_NAF and Ks_int_NAF derivation as defined in TS 33.220 [42] using the key material from
the previous GBA_U bootstrapping procedure.
If no key material is available this is considered as a GBA Bootstrapping failure and the USIM abandons the function.
The status word "6985" (Conditions of use not satisfied) is returned.
Otherwise, the USIM stores Ks_int_NAF and associated B-TID together with NAF_ID. The Ks_int_NAF keys related
to other NAF_Ids, which are already stored in the USIM, shall not be affected. The USIM updates EFGBANL as follows:
-
If a record with the given NAF_ID already exists, the USIM updates the B-TID field of this record with the BTID value associated to the GBA_U bootstrapped key involved in this GBA_U NAF derivation procedure.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
-
ETSI TS 131 102 V13.3.0 (2016-04)
If a record with the given NAF_ID does not exist, the USIM uses an empty record to store the NAF_ID and the
B-TID value associated to the GBA_U bootstrapped key involved in this GBA_U NAF Derivation procedure.
NOTE:
-
225
According to TS 33.220 [42], the USIM can contain several Ks_int_NAF together with the associated BTID and NAF_ID, but there is at most one pair of Ks_int_NAF and associated B-TID stored per NAF_ID.
In case no empty record is available the USIM shall overwrite an existing record to store the NAF_ID and the BTID value associated to the GBA_U bootstrapped key involved in this GBA_U NAF Derivation procedure. To
determine the record to overwrite, the USIM shall construct a list of record numbers by storing in the list first
position the record number of the last used (i.e. involved in an Authentication command) or derived Ks_int_NAF
and by shifting down the remaining list elements. The last record number in this list corresponds to the record to
overwrite when the USIM runs out of free records. If an existing record corresponding to a Ks_int_NAF key in
use is overwritten, the application Ks_int_NAF shall not be affected (e.g. in case a Ks_int_NAF was put into use
as an MBMS MUK key, the MUK key shall continue to be available for the MBMS application).
Then, the USIM returns Ks_ext_NAF.
Input:
-
NAF_ID, IMPI
Output:
-
Ks_ext_NAF
7.1.1.6
MBMS security context (MSK Update Mode)
USIM operations in MBMS security context are supported if service n°69 is "available".
The USIM receives the MIKEY packet containing an MSK update message. First, the USIM uses the MUK ID to
identify the Ks_int_NAF corresponding with a previous bootstrapping procedure.
The USIM shall check if a new NAF derivation procedure involving the received Idi in the MIKEY message has been
performed or if it is the first time that this Idi is used. If this check cannot be performed because the corresponding
Ks_int_NAF key was overwritten, the USIM abandons the function and returns the status word '6985' (Conditions of
use not satisfied). In case of a new NAF derivation procedure or a new Idi, the USIM shall store the last bootstrapped
Ks_int_NAF as the last generated MUK and update EFMUK as follows:
-
If a record with the received Idi (included in the MUK ID: see TS 33.246 [43]) value is already present, then the
MUK ID is stored in the corresponding field of this record, and the associated Time Stamp Counter (TS) field is
reset. Additionally, the USIM internally stores the last successfully used MUK (i.e. MUK that was used during
the last successful MSK update procedure), along with its MUK ID for further use (e.g. to detect Key freshness
failure).
-
If a record with the received Idi does not exist, the USIM uses an empty record to include the MUK ID, and reset
the associated TS field.
-
In case there is no empty record available in EFMUK the USIM abandons the function and the status word '9867'
(Authentication error, no available memory space in EFMUK) is returned.
NOTE:
In case no empty record in EFMUK is available the ME should run a MUK Deletion Mode procedure to
free entries in EFMUK before running an MSK Update Mode procedure that involves a new MUK key.
NOTE:
In case the ME receives the status word '6985', the ME should derive the required Ks_int_NAF key. In
case the corresponding bootstrapping key Ks is still available, the ME should invoke the Authenticate
command in "GBA - NAF derivation Mode" before invoking again the AUTHENTICATE command in
"MBMS - MSK Update Mode". In case the corresponding bootstrapping key has been updated, the ME
should put the new B-TID into use.
If the received MUK ID does not correspond to the last generated MUK (i.e. last bootstrapped MUK) then the USIM
proceeds as follows:
-
If the received MUK ID corresponds to the last successfully used MUK then the USIM uses this MUK to verify
the integrity of the message. If the verification is unsuccessful, the USIM abandons the function and returns the
status word '9862' (Authentication error, incorrect MAC). If the verification is successful, the USIM abandons
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
226
ETSI TS 131 102 V13.3.0 (2016-04)
the function and returns the status word '9865' (Key Freshness Failure), indicating to the ME that the received
MIKEY message is protected using the last successfully used MUK that does not correspond to the last
generated MUK (the new B-TID shall be put into use: see TS 33.246 [43]). In this case, the USIM shall not
return a MIKEY verification message.
-
Otherwise, this is considered as a bootstrapping failure (incorrect MUK) and the USIM abandons the function.
The status word "6A88" (Referenced data not found) is returned.
Otherwise, if the received MUK ID corresponds to the last generated MUK, the USIM uses the MUK value for MSK
validation and derivation functions as described in TS 33.246 [43]. If the validation is unsuccessful, the status word
'9862' (Authentication error, incorrect MAC) is returned and the USIM abandons the function.
After a successful MSK Update procedure the USIM stores the received credentials (e.g. MSK and/or Key Validity
data) and updates EFMSK as follows:
-
If a record with the received Key Domain ID and Key Group part (i.e. Key Group part of the MSK ID) already
exists, USIM stores the older MSK ID (if any) and its associated TS as the 2nd MSK ID and TS. The newer MSK
ID is stored as the 1st MSK ID. In case the received MSK message has the same MSK ID as a stored MSK, the
TS associated to this stored MSK is stored as the 1st TS. Otherwise, the 1st TS value is reset. The number of
stored MSK IDs and corresponding TS shall be set to '02' if the USIM stores two different MSK IDs. The USIM
shall not store two MSK IDs with the same Key Number part in the same record.
-
If a record with the received Key Domain ID and Key Group part does not exist, the USIM uses an empty record
to include those values. The received MSK ID is stored as the 1st MSK ID and the associated TS is reset. The 2nd
MSK ID and the associated TS are set to 'FF FF'. The number of stored MSK IDs and corresponding TS shall be
set to '01'. In case there is no empty record available in EFMSK the USIM abandons the function and the status
word '9866' (Authentication error, no available memory space) is returned.
-
In the case of a BM-SC solicited pull procedure (i.e. when the Key Number part of the MSK ID is set to 0x0),
EFMSK is not updated.
NOTE:
In case no empty record is available the ME should run an MSK Deletion Mode procedure to free entries
in EFMSK before running an MSK Update Mode procedure that contains a new MSK key.
Then, the USIM stores the Time Stamp field (retrieved from the MIKEY message) in its corresponding field under
EFMUK.
The USIM stores internally the last successfully used MUK along with its MUK ID for further use. This MUK may be
used beyond its GBA validity (i.e. after the derivation of a new Ks_int_NAF resulting from a new bootstrap procedure)
to verify the integrity of a MIKEY message in order to detect a synchronization failure. This may occur if the last
derived Ks_int_NAF did not reach the BM-SC.
The MSK is not necessarily updated in the MIKEY message, since a MSK transport message can be sent e.g. to update
the Key Validity data or as part of a BM-SC solicited pull procedure. In such a case the USIM shall use the status word
'9000' to inform the ME that the MIKEY message validation using the last generated MUK has succeeded.
Finally, if the V-bit in the HDR field of the received MIKEY message is set then the USIM shall produce a MSK
Verification Message as described in TS 33.246 [43]. In this case the command response is the MIKEY verification
message.
Input:
-
MIKEY message
Output:
-
MIKEY message
or
-
None
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
227
7.1.1.7
Void
7.1.1.8
MBMS security context (MTK Generation Mode)
ETSI TS 131 102 V13.3.0 (2016-04)
USIM operations in MBMS security context are supported if service n°69 is "available".
The USIM receives the MIKEY message containing an MBMS MTK and a Salt key (if Salt key is available). First, the
USIM retrieves the MSK with the Key Domain ID and the MSK ID given by the Extension payload of the MIKEY
message (as described in TS 33.246 [43]).
If the needed MSK does not exist, this is considered as a MSK failure and the USIM abandons the function. The status
word '6A88' (Referenced data not found) is returned.
If the key validity data of the MSK indicates an invalidated MSK (i.e. SEQl is greater than SEQu) then the USIM
returns the status word '6985' (Conditions of use not satisfied) and abandons the function. SEQl and SEQu are defined
in TS 33.246 [43].
Otherwise, the USIM performs the MBMS Generation and Validation Function (MGV-F) as described in
TS 33.246 [43] using MSK.
If the USIM detects that the given MTK ID is invalid, this is considered as a SEQp freshness failure and the USIM
abandons the function. The status word '9865' (Key freshness failure) is returned.
If the integrity validation of the MIKEY message is unsuccessful, the USIM abandons the function and returns the
status word '9862' (Authentication error, incorrect MAC).
After successful MGV_F procedure the USIM stores the Time Stamp field (retrieved from the MIKEY message) as the
Time Stamp Counter (TS) associated with the involved MSK under EFMSK
The USIM also stores MTK ID (retrieved from the MIKEY message) as the SEQl associated with MSK.
Then, the USIM returns MTK and Salt key (if Salt key is available).
Input:
-
MIKEY message
Output:
-
MTK and Salt (if available).
7.1.1.9
MBMS security context (MSK Deletion Mode)
USIM operations in MBMS security context are supported if service n°69 is "available".
The USIM receives the Key Domain ID and the Key Group part of the MSK ID. The USIM shall identify in the EFMSK
the record containing MSK IDs having this Key Domain ID and Key Group part.
If no record is identified, the USIM abandons the function and returns the status word '6A88' (Referenced data not
found).
If a record is found, the USIM shall delete all corresponding MSKs and set to 'FF' the bytes of this record.
Input:
-
Key Domain ID, MSK ID Key Group part
Output:
-
None.
7.1.1.10
MBMS security context (MUK Deletion Mode)
USIM operations in MBMS security context are supported if service n°69 is "available".
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
228
ETSI TS 131 102 V13.3.0 (2016-04)
The USIM shall identify in EFMUK the record containing the received MUK ID.
If no record is identified, the USIM abandons the function and returns the status word '6A88' (Referenced data not
found).
If a record is found, the USIM shall delete the corresponding MUK and set to 'FF' the bytes of this record. If a
corresponding Ks_int_NAF key is present (i.e. with the same NAF_ID), it shall be deleted and its corresponding record
in EFGBANL shall be set to 'FF'. In case the corresponding Ks key is present (i.e. with the same B-TID), it shall be deleted
and the content of EFGBABP shall be set to 'FF'.
Input:
MUK ID TLV
Output:
-
None
7.1.1.11
Local Key Establishment security context (Key Derivation mode)
USIM operations in this security context are supported if service n°68 and service n°76 are "available".
The USIM receives the NAF_ID corresponding to the NAF Key Centre, the Terminal_ID, the Terminal_appli_ID, the
UICC_appli_ID, RANDx, the Counter Limit value and the MAC as described in TS 33.110 [47].
The USIM uses the NAF_ID to identify the Ks_int_NAF associated to the NAF Key Centre. If no valid Ks_int_NAF is
available, this is considered as a Key Establishment failure and the USIM abandons the function. The status word
'6A88' (Referenced data not found) is returned.
If the Ks_local key derivation is not authorized by the local UICC policy (e.g. Terminal_appli_ID/UICC_appli_ID
association not authorized or Terminal_ID value not authorized), the USIM abandons the function. The status word
'6985' (Conditions of use not satisfied) is returned.
Otherwise, the USIM retrieves the appropriate Ks_int_NAF, derives Ks_local as described in TS 33.110 [47]. The
USIM verifies the MAC value received from the Terminal as described in TS 33.110 [47]:
-
If the verification is unsuccessful, the USIM abandons the function and returns the status word '9862'
(Authentication error, incorrect MAC).
-
If the verification is successful, the USIM stores Ks_local and associated parameters Terminal_ID,
Terminal_appli_ID, UICC_appli_ID, RANDx and the Ks_local Counter Limit. The USIM returns the Local Key
Establishment Operation Response TLV (indicating a successful Key Derivation operation) and a response
MAC, which is derived as described in TS 33.110 [47].
The minimum number of Local keys that can be stored by the USIM shall be defined by the service provider at the preissuance of the card.
In case the maximum number of Local Key was already reached or there is not enough available memory in the USIM,
the USIM shall overwrite a Local Key and its associated data in order to store the new one. To determine the Ks_local
to overwrite, the USIM shall construct a list of Ks_local identifiers by storing in the list first position the Ks_local
identifier of the last used or derived Ks_local and by shifting down the remaining list elements. The last Ks_local
identifier in this list corresponds to the Ks_local to overwrite when the USIM runs out of free memory or when the
maximum number of Ks_local keys is reached. If an existing Ks_local in use is overwritten, the application using
Ks_local shall not be affected.
Input:
-
Local Key Establishment Mode (Key Derivation mode), Counter Limit, request MAC, Key Identifier (i.e.
NAF_ID, Terminal_ID, Terminal_appli_ID, UICC_appli_ID, RANDx)
Output:
-
Key Derivation operation status, response MAC.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
7.1.1.12
229
ETSI TS 131 102 V13.3.0 (2016-04)
Local Key Establishment security context (Key Availability Check mode)
USIM operations in this security context are supported if service n°68 and service n°76 are "available".
The USIM receives a Ks_local identifier. The USIM checks if a corresponding valid Ks_local is available. If a valid
Ks_local key is available the Local Key Establishment Operation Response TLV (indicating a successful Key
Availability Check operation) is returned. In case no valid Ks_local key is available the command fails and the status
word '6A88' (Referenced data not found) is returned.
Input:
Local Key Establishment Mode (Key Availability Check mode), Key identifier (i.e. NAF_ID, Terminal_ID,
Terminal_appli_ID, UICC_appli_ID, RANDx).
Output:
-
7.1.2
Key Availability Check Operation Status.
Command parameters and data
This command can be used with an EVEN or an ODD instruction (INS) code. The EVEN instruction code can be used
when the challenge data provided by the terminal is not TLV encapsulated data and the length of the challenge data
provided by the terminal is less than 256 bytes.
The ODD instruction code shall be used with the security context specified in table 2, when challenge and response data
is TLV encapsulated regardless of their length. Terminals and UICCs that do not support security context requiring
TLV format (e.g. MBMS), do not have to support AUTHENTICATE command with ODD instruction code.
EVEN INS code
Code
CLA
INS
P1
P2
Lc
Data
Le
Value
As specified in TS 31.101 [11]
'88'
'00'
See table 1 below
See below
See below
'00', or maximum length of data expected in
response
Parameter P2 specifies the authentication context as follows:
Table 1: Coding of the reference control P2
Coding
b8-b1
'1-------'
'----- XXX'
Meaning
Specific reference data (e.g. DF
specific/application dependant key)
Authentication context:
000 GSM context
001 3G context
010 VGCS/VBS context
100 GBA context
All other codings are RFU.
ODD INS code
The authentication data and the authentication response data are encapsulated in BER-TLV objects structured using tag
'73' for BER-TLV structured data and tag '53' otherwise.
How this command can chain successive blocks of authentication data, or authentication response data is described in
TS 31 101 [11].
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
230
ETSI TS 131 102 V13.3.0 (2016-04)
If P1 indicates "First block of authentication data" or "Next block of authentication data":
Input:
-
Authentication data encapsulated in a BER-TLV data object.
Output:
-
None.
Code
CLA
INS
P1
P2
Lc
Data
Le
Value
As specified in TS 31.101 [11]
'89'
As specified in TS 31.101 [11]
See table 2 below
Length of the subsequent data field
Authentication related data
Not present
If P1 indicates "First block of authentication response data" or "Next block of authentication response data":
Input:
-
None.
Output:
-
Authentication response data encapsulated in a BER-TLV data object.
Code
CLA
INS
P1
P2
Lc
Data
Le
Value
As specified in TS 31.101 [11]
'89'
As specified in TS 31.101 [11]
See table 2 below
Not present
Not present
Length of the response data
Parameter P1 is used to control the data exchange between the terminal and the UICC as defined in TS 31.101 [11].
Parameter P2 specifies the authentication context as follows:
Table 2: Coding of the reference control P2
Coding
b8-b1
'1-------'
'----- XXX'
Meaning
Specific reference data (e.g. DF specific/application dependant key)
Authentication context:
101 MBMS context
110 Local Key Establishment mode
All other codings are RFU.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
231
ETSI TS 131 102 V13.3.0 (2016-04)
Command parameters/data:
7.1.2.1
GSM/3G security context
Byte(s)
Description
1
Length of RAND (L1)
2 to (L1+1)
RAND
(L1+2)
Length of AUTN (L2)
(see note)
(L1+3) to
AUTN
(see note)
(L1+L2+2)
Note: Parameter present if and only if in 3G security context.
Length
1
L1
1
L2
The coding of AUTN is described in TS 33.102 [13]. The most significant bit of RAND is coded on bit 8 of byte 2. The
most significant bit of AUTN is coded on bit 8 of byte (L1+3).
Response parameters/data, case 1, 3G security context, command successful:
Byte(s)
Description
1
"Successful 3G authentication" tag = 'DB'
2
Length of RES (L3)
3 to (L3+2)
RES
(L3+3)
Length of CK (L4)
(L3+4) to
CK
(L3+L4+3)
(L3+L4+4)
Length of IK (L5)
(L3+L4+5) to
IK
(L3+L4+L5+4)
(L3+L4+L5+5)
Length of KC (= 8)
(see note)
(L3+L4+L5+6
(see note)
KC
to
(L3+L4+L5+13)
Note:
Parameter present if and only if Service n°27 is "available".
Length
1
1
L3
1
L4
1
L5
1
8
The most significant bit of RES is coded on bit 8 of byte 3. The most significant bit of CK is coded on bit 8 of byte
(L3+4). The most significant bit of IK is coded on bit 8 of byte (L3+L4+5).
Response parameters/data, case 2, 3G security context, synchronisation failure:
Byte(s)
1
2
3 to (L1+2)
Description
"Synchronisation failure" tag = 'DC'
Length of AUTS (L1)
AUTS
Length
1
1
L1
The coding of AUTS is described in TS 33.102 [13]. The most significant bit of AUTS is coded on bit 8 of byte 3.
Response parameters/data, case 3, GSM security context, command successful:
Byte(s)
1
2 to 5
6
7 to 14
Description
Length of SRES (= 4)
SRES
Length of KC (= 8)
KC
Length
1
4
1
8
The most significant bit of SRES is coded on bit 8 of byte 2. The most significant bit of Kc is coded on bit 8 of byte 7.
7.1.2.2
VGCS/VBS security context
Byte(s)
1
2 to 5
Description
Length of Vservice_Id
Vservice_Id
Length
1
4
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
6
7
8
9 to L1+8
232
ETSI TS 131 102 V13.3.0 (2016-04)
Length of VK_Id
VK_Id
Length of VSTK_RAND (L1)
VSTK_RAND
1
1
1
L1
Vservice_Id is coded in the same way as the octets 2-5 in the Descriptive group or broadcast call reference information
element as defined in TS 24.008 [9].
An Example for the coding of Vservice_Id can be found in Annex K.
The coding of VK_Id is as follows:
Coding of VK_Id
Coding
b8-b1
'00000001'
'00000010'
Meaning
st
Corresponds to the 1 group key
nd
Corresponds to the 2 group key
The coding of VSTK_RAND is described in TS 43.020 [44]. The VSTK_RAND shall be inserted left-aligned into the
L1 bytes, with unused bits to the right set to zero.
Response parameters/data, VGCS/VBS security context, command successful:
Byte(s)
1
2
3 to 18
7.1.2.3
Description
"Successful VGCS/VBS operation" tag = 'DB'
Length of VSTK (16)
VSTK
Length
1
1
16
GBA security context (Bootstrapping Mode)
Byte(s)
1
2
3 to (L1+2)
(L1+3)
(L1+4) to
(L1+L2+3)
Description
'GBA Security Context Bootstrapping Mode' tag = "DD"
Length of RAND (L1)
RAND
Length of AUTN (L2)
AUTN
Length
1
1
L1
1
L2
Response parameters/data, GBA security context (Bootstrapping Mode), synchronisation failure:
Byte(s)
1
2
3 to (L1+2)
Description
"Synchronisation failure" tag = 'DC'
Length of AUTS (L1)
AUTS
Length
1
1
L1
AUTS coded as for UMTS Security context.
Response parameters/data, GBA security context (Bootstrapping Mode), command successful:
Byte(s)
1
2
3 to (L+2)
Description
"Successful GBA operation" tag = 'DB'
Length of RES (L)
RES
RES coded as for UMTS Security context.
ETSI
Length
1
1
L
3GPP TS 31.102 version 13.3.0 Release 13
7.1.2.4
233
ETSI TS 131 102 V13.3.0 (2016-04)
GBA security context (NAF Derivation Mode)
Byte(s)
1
2
3 to (L1+2)
(L1+3)
(L1+4) to
(L1+L2+3)
Description
'GBA Security Context NAF Derivation Mode' tag = "DE"
Length of NAF_ID (L1)
NAF_ID
Length of IMPI (L2)
IMPI
Length
1
1
L1
1
L2
Response parameters/data, GBA security context (NAF Derivation Mode), command successful:
Byte(s)
1
2
3 to (L+2)
Description
"Successful GBA operation" tag = 'DB'
Length of Ks_ext_NAF (L)
Ks_ext_NAF
Length
1
1
L
Coding of Ks_ext_NAF as described in TS 33.220 [42].
7.1.2.5
MBMS security context (All Modes)
Byte(s)
1
2 to 1+A bytes (A ≤ 4)
A+2
A+3 to (A+L1+1)
Description
MBMS Data Object tag ("53")
MBMS Data Object length (L1)
MBMS Security Context Mode
MIKEY message or Key Domain ID ||
MSK ID Key Group part or MUK ID TLV
Coding
As defined in TS 31.101 [11] for
BER-TLV data object
As defined in TS 31.101 [11] for
BER-TLV data object
See below
Length
1
A
1
L1-1
Only the MIKEY message shall be transmitted in the MBMS security context mode '01' or '02'.
Only the Key Domain ID (coded on 3 bytes as described in TS 33.246 [43]) concatenated with the Key Group part of
the MSK ID (coded on two bytes as described in TS 33.246 [43] where the last transmitted byte represents the least
significant byte of the Key Group part) shall be transmitted in the MBMS security context mode '03'.
Only the MUK ID TLV shall be transmitted in the MBMS security context mode '04'. The MUK ID TLV, containing
the MUK Idr and MUK Idi only, shall be encoded as described in clause 4.2.81.
Parameter MBMS Security Context Mode specifies the MBMS mode in which MBMS security procedure is performed
as follows:
Coding of MBMS Security Context Mode
Coding
'01'
"02'
'03'
'04'
Meaning
MSK Update Mode
MTK Generation Mode
MSK Deletion Mode
MUK Deletion Mode
Response parameters/data, MBMS security context (MSK Update Mode), command successful:
Byte(s)
1
Description
Coding
Length
MBMS operation response Data Object tag
As defined in TS 31.101 [11] for
1
("53")
BER-TLV data object
2 to 1+A bytes (A ≤ 4)
MBMS operation response Data Object length As defined in TS 31.101 [11] for
A
(L)
BER-TLV data object
A+2
"Successful MBMS operation" tag = 'DB' (see
1
note 1)
A+3 to (A+L+1)
MIKEY message (see note 1)
L-1
NOTE 1: Parameter present if a MIKEY verification message is returned. Otherwise, the USIM returns "53 01 DB"
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
234
ETSI TS 131 102 V13.3.0 (2016-04)
Response parameters/data, MBMS security context (MTK Generation Mode), command successful:
Byte(s)
1
2 to 1+A bytes (A ≤ 4)
A+2
A+3 to (A+L+1)
Description
MBMS operation response Data Object tag
("53")
MBMS operation response Data Object length
(L)
"Successful MBMS operation" tag = 'DB'
MTK || Salt (if Salt key is available)
Coding
Length
As defined in TS 31.101 [11] for
1
BER-TLV data object
As defined in TS 31.101 [11] for
A
BER-TLV data object
1
L-1
Response parameters/data, MBMS security context (MSK and MUK Deletion Mode), command successful:
Byte(s)
1
Description
Coding
Length
MBMS operation response Data Object tag
As defined in TS 31.101 [11] for
1
("53")
BER-TLV data object
MBMS operation response Data Object length As defined in TS 31.101 [11] for
1
BER-TLV data object
"Successful MBMS operation" tag = 'DB'
1
2
3
The coding of parameters is described in TS 33.246 [43].
Note: The constructed TLV tag value 'AE' is used by OMA BCAST Smart Card Profile [49] for the encapsulation
of command and response parameters/data.
7.1.2.6
Local Key Establishment security context (All Modes)
The Local Key Establishment Control TLV is included in the command data to indicate the security context mode. The
Local Key Establishment Control TLV is also included in the response data to indicate the operation status.
Table 3: Coding of the Local Key Establishment Control TLV
Tag Value
Length
'80'
Coded according to
ISO/IEC 8825-1 [35]
Value / Meaning
Local Key Establishment context:
'01': Key Derivation mode
'02': Key Availability Check mode
Operation Status:
'DB': Successful Operation
7.1.2.6.1
Local Key Establishment security context (Key Derivation mode)
Command parameters/data:
Byte(s)
1
Description
Key Derivation Data Object tag ("73")
2 to A+1 bytes (A ≤ 4)
Key Derivation Data Object length (L)
A+2 to (A+L+1)
-
Key Derivation Data Object
Coding
As defined in TS 31.101 [11] for
BER-TLV data object
As defined in TS 31.101 [11] for
BER-TLV data object
Length
1
A
L
Key Derivation Data Object content: The TLVs defined in table 4 are included in the Key Derivation Data
Object.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
235
ETSI TS 131 102 V13.3.0 (2016-04)
Table 4: Coding of the Key Derivation Data Object
Description
Local Key Establishment Control
TLV
Value
M/O
Length (bytes)
Coded as defined in
M
B
section 7.1.2.6. The
value field shall be set
to '01'
Counter Limit tag
'81'
M
1
Length
C
M
Note 1
Counter Limit
Coded as defined in
M
C
TS 33.110 [47]
Request MAC tag
'82'
M
1
Length
D
M
Note 1
Request MAC
Coded as defined in
M
D (see Note 3)
TS 33.110 [47]
Key Identifier tag
'A0'
M
1
Length
E (see Note 2)
M
Note 1
NAF_ID tag
'83'
M
1
Length
F
M
Note 1
NAF_ID
Coded as defined in
M
F
TS 33.220 [42]
Terminal_ID tag
'84'
M
1
Length
G
M
Note 1
Terminal_ID
Coded as defined in
M
G
TS 33.110 [47]
Terminal_appli_ID tag
'85'
M
1
Length
H
M
Note 1
Terminal_appli_ID
Coded as defined in
M
H
TS 33.110 [47]
UICC_appli_ID tag
'86'
M
1
Length
I
M
Note 1
UICC_appli_ID
Coded as defined in
M
I
TS 33.110 [47]
RANDx tag
'87'
M
1
Length
J
M
Note 1
RANDx
Coded as defined in
M
J (see Note 4)
TS 33.110 [47]
Note 1: The length is coded according to ISO/IEC 8825-1 [35].
Note 2: The Key Identifier TLV is a constructed TLV containing the following primitive
TLVs: NAF_ID, Terminal_ID, Terminal_appli_ID, UICC_appli_ID and RANDx. E
is the length of the constructed Key Identifier value.
Note 3: The most significant bit of the request MAC is coded on bit 8 of the first byte
following the MAC Length.
Note 4: The most significant bit of the RANDx is coded on bit 8 of the first byte following
the RANDx Length.
Response parameters/data, Local Key Establishment security context (Key Derivation mode), command successful:
Byte(s)
1
Description
Key Derivation Operation Response Data
Object tag ("73")
2 to A1+1 bytes (A1 ≤ 4) Key Derivation Operation Response Data
Object length (L1)
A1+2 to (A1+L1+1)
Key Derivation Operation Response Data
Object
Coding
Length
As defined in TS 31.101 [11] for
1
BER-TLV data object
As defined in TS 31.101 [11] for
A1
BER-TLV data object
L1
Key Derivation Operation Response Data Object content: The TLVs defined in table 5 are included in the Key
Derivation Operation Response Data Object.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
236
ETSI TS 131 102 V13.3.0 (2016-04)
Table 5: Coding of the Key Derivation Operation Response Data Object
Description
Local Key Establishment Control
TLV
Value
M/O
Length (bytes)
Coded as defined in
M
B
section 7.1.2.6. The
value field shall be
set to 'DB'
Response MAC tag
'82'
M
1
Length
C
M
Note 1
Response MAC
Coded as defined in
M
C (see Note 2)
TS 33.110 [47]
Note 1: The length is coded according to ISO/IEC 8825-1 [35].
Note 2: The most significant bit of the response MAC is coded on bit 8 of the first byte
following the MAC length.
7.1.2.6.2
Local Key Establishment security context (Key Availability Check mode)
Command parameters/data:
Byte(s)
1
2 to 1+A bytes (A ≤ 4)
A+2 to (A+L+1)
-
Description
Key Availability Check Data Object tag
("73")
Key Availability Check Data Object
length (L)
Key Availability Check Data Object
Coding
As defined in TS 31.101 [11] for
BER-TLV data object
As defined in TS 31.101 [11] for
BER-TLV data object
Length
1
A
L
Key Availability Check Data Object content: The TLVs defined in table 6 are included in the Key Availability
Check Data Object.
Table 6: Coding of the Key Availability Check Data Object
Description
Local Key Establishment
Control TLV
Key Identifier TLV
Value
Coded as defined in
section 7.1.2.6. The value
field shall be set to '02'
Coded as defined in
section 7.1.2.6.1
M/O
M
Length (bytes)
B
M
C
Response parameters/data, Local Key Establishment security context (Key Availability Check mode), command
successful:
Byte(s)
1
Description
Key Availability Check Operation Response
Data Object tag ('73')
2 to 1+A1 bytes (A1 ≤ 4) Key Availability Check Operation Response
Data Object length (L1)
A1+2 to (A1+L1+1)
Key Availability Check Operation Response
Data Object
-
Coding
Length
As defined in TS 31.101 [11] for
1
BER-TLV data object
As defined in TS 31.101 [11] for
A1
BER-TLV data object
L1
Key Availability Check Operation Response Data Object content: The TLV defined in table 7 is included in the
Key Availability Check Operation Response Data Object.
Table 7: Coding of the Key Availability Check Operation Response Data Object
Description
Local Key Establishment Control TLV
Value
Coded as defined in
section 7.1.2.6. The
value field shall be
set to 'DB'
ETSI
M/O
M
Length (bytes)
B
3GPP TS 31.102 version 13.3.0 Release 13
237
ETSI TS 131 102 V13.3.0 (2016-04)
7.2
Void
7.3
Status Conditions Returned by the USIM
Status of the card after processing of the command is coded in the status bytes SW1 and SW2. This clause specifies the
coding of the status bytes in the following tables, in addition to the ones defined in TS 31.101 [11].
7.3.1
Security management
SW1
'98'
'98'
'98'
'98'
'98'
SW2
'62'
'64'
'65'
'66'
'67'
Error description
- Authentication error, incorrect MAC
- Authentication error, security context not supported
- Key freshness failure
- Authentication error, no memory space available
- Authentication error, no memory space available in EFMUK
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
7.3.2
238
ETSI TS 131 102 V13.3.0 (2016-04)
Status Words of the Commands
The following table shows for each command the possible status conditions returned (marked by an asterisk *).
Commands and status words
AUTHENTICATE
Status Words
90 00
*
91 XX
*
93 00
98 50
98 62
*
98 64
*
98 65
*
98 66
*
98 67
*
62 00
*
62 81
62 82
62 83
62 F1
*
62 F3
*
63 CX
63 F1
*
64 00
*
65 00
*
65 81
*
67 00
*
67 XX – (see note)
*
68 00
*
68 81
*
68 82
*
69 81
69 82
*
69 83
69 84
*
69 85
*
69 86
6A 80
6A 81
*
6A 82
6A 83
6A 86
*
6A 87
6A 88
*
6B 00
*
6E 00
*
6F 00
*
6F XX – (see note)
*
NOTE: Except SW2 = '00'.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
7.4
239
ETSI TS 131 102 V13.3.0 (2016-04)
Optional commands
The following command is optional for the USIM application:
-
GET CHALLENGE command as defined in TS 31.101 [11].
Note: OMA BCAST Smart Card Profile [49] defines a command using instruction code INS '1B'
8
Void
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
240
ETSI TS 131 102 V13.3.0 (2016-04)
Annex A (informative):
EF changes via Data Download or USAT applications
This annex defines if changing the content of an EF by the network (e.g. by sending an SMS), or by a USAT
Application, is advisable. Updating of certain EFs "over the air" such as EFACC could result in unpredictable behaviour
of the UE; these are marked "Caution" in the table below. Certain EFs are marked "No"; under no circumstances should
"over the air" changes of these EFs be considered.
File identification
'2F00'
'2F05'
'2F06'
'2F08'
'2FE2'
'4F01'
'4F01'
'4F01'
'4F02'
'4F02'
'4F03'
'4F03'
'4F04'
'4F04'
'4F05'
'4F05'
'4F06'
'4F07'
'4F08'
'4F09'
'4F10'
'4F11'
'4F12'
'4F13'
'4F14'
'4F20'
"4F20"
'4FXX'
'4FXX'
'4F21'
'4FXX'
'4F22'
'4F23'
'4F24'
'4F30'
'4FXX'
'4F30'
'4F31'
'4FXX'
"4F52"
'4F63'
'4F64"
'4FXX'
'4FXX'
'4FXX'
'4FXX'
'4FXX'
'4FXX'
'4FXX'
'4FXX'
'4FXX'
Description
Change advised
Application directory
Caution
Preferred languages
Yes
Access rule reference
Caution
UICC Maximum Power Consumption
No
ICC identification
No
ProSe Monitoring Parameters
Yes
ACDC List
Yes
MCPTT Service Table
Yes
ProSe Announcing Parameters
Yes
MCPTT UE configuration data
Yes
HPLMN ProSe Function
Yes
MCPTT User configuration data
Yes
ProSe Direct Communication Radio Parameters
Yes
MCPTT Group configuration data
Yes
ProSe Direct Discovery Monitoring Radio Parameters
Yes
MCPTT Service configuration data
Yes
ProSe Direct Discovery Announcing Radio Parameters
Yes
ProSe Policy Parameters
Yes
ProSe PLMN Parameters
Yes
ProSe Group Counter
No
ProSe Service Table
Caution
ProSe UsageInformationReportingConfiguration
Caution (Note 4)
ProSe Group Member Discovery Parameters
Yes
ProSe Relay Parameters
Yes
ProSe Relay Discovery Parameters
Yes
Image data
Yes
GSM Ciphering key Kc
No
Image Instance data Files
Yes
ACDC OS Configuration
Yes
ICE graphics
Yes
Unique identifier
Yes
Phone book synchronisation counter
Yes
Change counter
Yes
Previous unique identifier
Yes
Phone book reference file
Yes
Capability configuration parameters 1
Yes
SoLSA Access Indicator
Caution
SoLSA LSA List
Caution
LSA Descriptor files
Caution
GPRS Ciphring key KcGPRS
No
CPBCCH Information
No
Investigation Scan
Caution
Additional number alpha string
Yes
Additional number
Yes
Second name entry
Yes
Grouping information alpha string
Yes
Phone book control
Yes
E-mail addresses
Yes
Index administration phone book
Yes
Extension 1
Yes
Abbreviated dialling numbers
Yes
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
File identification
'4FXX'
'4F41'
'4F42'
'4F43'
'4F44'
'4F45'
'4F46'
4F47'
'4F47'
'4F48'
'4F48'
'4F49'
'4F4A'
'4F4B'
'4F81'
'4F82'
'4F83'
'4F84'
'4F85'
'4F86'
'6F05'
"6F06"
'6F07'
'6F08'
'6F09'
'6F2C'
'6F31'
'6F32'
'6F37'
'6F38'
'6F39'
'6F3B'
'6F3C'
'6F3E'
'6F3F'
'6F40'
'6F41'
'6F42'
'6F43'
'6F45'
'6F46'
'6F47'
'6F48'
'6F49'
'6F4B'
'6F4C'
'6F4D'
'6F4E'
'6F4F'
'6F50'
'6F54'
"6F55"
'6F56'
'6F57'
'6F58'
'6F5B'
'6F5C'
'6F60'
'6F61'
'6F62'
'6F73'
241
ETSI TS 131 102 V13.3.0 (2016-04)
Description
Change advised
Grouping file
Yes
Pseudonym
Caution
User controlled PLMN selector for I-WLAN
No
Operator controlled PLMN selector for I-WLAN
Caution
User controlled WSID List
No
Operator controlled WSID List
Caution
WLAN Reauthentication Identity
No
Home I-WLAN Specific Identifier List
Yes
Multimedia Messages List
Yes
I-WLAN Equivalent HPLMN Presentation Indication
Yes
Multimedia Messages Data File
Yes
I-WLAN HPLMN Priority Indication
Yes
I-WLAN Last Registered PLMN
Caution
HPLMN Direct Access Indicator
Yes
Allowed CSG lists
Yes
CSG Type
Yes
HNB name
Yes
Operator CSG lists
Yes
Operator CSG Type
Yes
Operator HNB name
Yes
Language indication
Yes
Access rule reference (under ADFUSIM and DFTELECOM)
Caution
IMSI
Caution (Note 1)
Ciphering and integrity keys
No
Ciphering and integrity keys for packet switched
No
domain
De-personalization Control Keys
Caution
Higher Priority PLMN search period
Caution
Co-operative network list
Caution
ACM maximum value
Yes
USIM service table
Caution
Accumulated call meter
Yes
Fixed dialling numbers
Yes (Note 2)
Short messages
Yes
Group identifier level 1
Yes
Group identifier level 2
Yes
MSISDN storage
Yes
PUCT
Yes
SMS parameters
Yes
SMS status
Yes
CBMI
Caution
Service provider name
Yes
Short message status reports
Yes
CBMID
Yes
Service Dialling Numbers
Yes (Note 2)
Extension 2
Yes
Extension 3
Yes
Barred dialling numbers
Yes
Extension 5
Yes
Capability configuration parameters 2
Yes
CBMIR
Yes
SetUp Menu Elements
Yes
Extension 4
Yes
Enabled services table
Caution
Access point name control list
Yes
Comparison method information
Yes
Initialisation value for Hyperframe number
Caution
Maximum value of START
Yes
User controlled PLMN selector with Access Technology
No
Operator controlled PLMN selector with Access
Caution
Technology
HPLMN selector with Access Technology
Caution
Packet switched location information
Caution (Note 1)
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
File identification
'6F78'
'6F7B'
'6F7E'
'6F80'
'6F81'
'6F82'
'6F83'
'6FAD'
'6FB1'
'6FB2'
'6FB3'
'6FB4'
'6FB5'
'6FB6'
'6FB7'
'6FC3'
'6FC4'
'6FC5'
'6FC6'
'6FC7'
'6FC8'
'6FC9'
'6FCA'
'6FCB'
'6FCC'
'6FCD'
'6FCE'
'6FCF'
'6FD0'
'6FD1'
'6FD2'
'6FD3'
'6FD4'
'6FD5'
'6FD6'
'6FD7'
'6FD8'
'6FD9'
'6FDA'
'6FDB'
'6FDC'
'6FDD'
'6FDE'
'6FDF'
'6FE0'
'6FE1'
'6FE2'
'6FE3'
'6FE4'
'6FE5'
'6FE6'
'6FE7'
'6FE8'
'6FE9'
'6FEA'
'6FEB'
'6FEC'
'6FED'
'6FEE'
'6FEF'
'6FF0'
'6FF1'
242
Description
Access control class
Forbidden PLMNs
Location information
Incoming call information
Outgoing call information
Incoming call timer
Outgoing call timer
Administrative data
Voice Group Call Service
Voice Group Call Service Status
Voice Broadcast Service
Voice Broadcast Service Status
Enhanced Multi Level Pre-emption and Priority
Automatic Answer for eMLPP Service
Emergency Call Codes
Key for hidden phone book entries
Network Parameters
PLMN Network Name
Operator Network List
Mailbox Dialling Numbers
Extension 6
Mailbox Identifier
Message Waiting Indication Status
Call Forwarding Indication Status
Extension 7
Service Provider Display Information
MMS Notification
Extension 8
MMS Issuer Connectivity Parameters
MMS User Preferences
MMS User Connectivity Parameters
Network's indication of alerting (NIA)
Voice Group Call Service Ciphering Algorithm
Voice Broadcast Service Ciphering Algorithm
GBA Bootstrapping parameters
MBMS Service Keys List
MBMS User Key
EHPLMN
GBA NAF List
EHPLMN Presentation Indication
Last RPLMN Selection Indication
NAF Key Centre Address
Service Provider Name Icon
PLMN Network Name Icon
In Case of Emergency – Dialling Number
In Case of Emergency – Free Format
Network Connectivity Parameters for UICC IP
connections
EPS location information
EPS NAS Security Context
Public Service Identity of the SM-SC
USAT Facility Control
UICC IARI
Non Access Stratum Configuration
UICC certificate
Relay Node ID
Max value of Secure Channel counter
Public Warning System
FDN URI
BDN URI
SDN URI
IMEI(SV) White List
IMEI(SV) Pairing Status
ETSI
ETSI TS 131 102 V13.3.0 (2016-04)
Change advised
Caution
Caution
No (Note 1)
Yes
Yes
Yes
Yes
Caution
Yes
Yes
Yes
Yes
Yes
Yes
Caution
No
No
Yes
Yes
Yes
Yes
Caution
Caution
Caution
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Caution
Yes
Yes
Caution
Caution
Caution
Caution
Caution
Caution
Caution
Caution
Yes
Yes
Yes
Yes
Yes
Caution (Note 1)
Caution
Yes
Caution
Caution (Note 3)
Yes
Yes
Yes
Caution
Yes
Yes
Yes
Yes
Yes
Caution
3GPP TS 31.102 version 13.3.0 Release 13
File identification
'6FF2'
'6FF3'
'6FF4'
"6FF5"
"6FF6"
NOTE1:
NOTE2:
NOTE3:
NOTE4:
243
ETSI TS 131 102 V13.3.0 (2016-04)
Description
IMEI(SV) Pairing Devices
Home ePDG Identifier
ePDG Selection Information
Emergency ePDG Identifier
ePDG Selection Information for Emergency Services
Change advised
Caution
Yes
Yes
Yes
Yes
If EFIMSI is changed, the UICC should issue REFRESH as defined in TS 31.111 and update
EFLOCI, EFPSLOCI and EFEPSLOCI accordingly.
This file may contain eCALL related test and reconfiguration numbers.
If EFUICCIARI is changed, the UICC shall issue a REFRESH command as defined in TS 31.111.
The ME shall read the updated list of IARIs associated with active applications installed on the
UICC.
Updating EFProSe_UIRC Over-The-Air, especially adding more parameters to the report, may
cause a reduction of number of reports to be able to be stored in the UE.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
244
ETSI TS 131 102 V13.3.0 (2016-04)
Annex B (normative):
Image Coding Schemes
The following image coding schemes are applicable to rectangular raster images. Raster image points are assumed to be
of square shape. They are numbered sequentially from 1 onwards, starting at the upper left corner, proceeding line by
line downwards, each line in turn proceeding from left to right, and ending at the image's lower right corner.
The following example illustrates the numbering scheme for raster image points by showing how the corner points are
numbered, assuming an image length of x points and an image height of y points.
1
x
(x * (y-1) + 1)
B.1
(x * y)
Basic Image Coding Scheme
This coding scheme applies to rectangular raster images made up of raster points that are either set or not set. This
coding scheme does not support any notion of colour. Image data are coded as follows:
Byte(s)
1
2
3 to K+2
Description
image width = X
image height = Y
image body
Length
1
1
K
Coding of image body:
-
The status of each raster image point is coded in one bit, to indicate whether the point is set (status = 1) or not set
(status = 0).
Byte 1:
B8
b7
b6
b5
b4
b3
b2
b1
status
status
status
status
status
status
status
status
of
of
of
of
of
of
of
of
raster
raster
raster
raster
raster
raster
raster
raster
point
point
point
point
point
point
point
point
8
7
6
5
4
3
2
1
status
status
status
status
status
status
status
status
of
of
of
of
of
of
of
of
raster
raster
raster
raster
raster
raster
raster
raster
point
point
point
point
point
point
point
point
16
15
14
13
12
11
10
9
Byte 2:
B8
b7
b6
b5
b4
b3
b2
b1
etc.
Unused bits shall be set to 1.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
B.2
245
ETSI TS 131 102 V13.3.0 (2016-04)
Colour Image Coding Scheme
This coding scheme applies to coloured rectangular raster images. Raster image point colours are defined as references
into a colour look-up table (CLUT), which contains a subset of the red-green-blue colour space. The CLUT in turn is
located in the same transparent file as the image instance data themselves, at an offset defined within the image instance
data.
Image data are coded as follows:
Byte(s)
1
2
3
4
5 to 6
7 to K+6
Description
Image width = X
Image height = Y
Bits per raster image point = B
Number of CLUT entries = C
Location of CLUT (Colour Look-up Table)
Image body
Length
1
1
1
1
2
K
Bits per raster image point:
Contents:
- the number B of bits used to encode references into the CLUT, thus defining a raster image point's colour. B
shall have a value between 1 and 8.
Coding:
- binary.
Number of entries in CLUT:
Contents:
- the number C of entries in the CLUT which may be referenced from inside the image body. CLUT entries are
numbered from 0 to C-1. C shall have a value between 1 and 2**B.
Coding:
- binary. The value 0 shall be interpreted as 256.
Location of CLUT:
Contents:
- this item specifies where the CLUT for this image instance may be found. The CLUT is always located in the same
transparent file as the image instance data themselves, at an offset determined by these two bytes.
Coding:
- Byte 1: high byte of offset into Image Instance File.
- Byte 2: low byte of offset into Image Instance File.
Image body:
Coding:
- each raster image point uses B bits to reference one of the C CLUT entries for this image instance. The CLUT entry
being thus referenced yields the raster image point's colour. The image body is arrayed as for the Basic Colour Image
Coding Scheme, that is, starting with the highest bit of the first raster image point's colour information.
Byte 1:
B8
b7
b6
b5
b4
b3
b2
b1
... etc
... etc
... etc
... etc
... etc
Bit B-2 of raster point 1 CLUT reference
Bit B-1 of raster point 1 CLUT reference
Bit B (MSB) of raster point 1 CLUT reference
etc.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
246
ETSI TS 131 102 V13.3.0 (2016-04)
Unused bits shall be set to 1.
The CLUT (Colour Look-up Table) for an image instance with C colours is defined as follows:
Contents:
- C CLUT entries defining one colour each.
Coding:
- the C CLUT entries are arranged sequentially:
Byte(s) of CLUT
1-3
...
3*(C-1) +1 to 3*C
CLUT Entry
entry 0
...
Entry C-1
Each CLUT entry in turn comprises 3 bytes defining one colour in the red-green-blue colour space:
Byte(s) of CLUT entry
1
2
3
Intensity of Colour
Red
Green
Blue
A value of 'FF' means maximum intensity, so the definition 'FF' '00' 00' stands for fully saturated red.
NOTE 1: Two or more image instances located in the same file can share a single CLUT.
NOTE 2: Most MEs capable of displaying colour images are likely to support at least a basic palette of red, green,
blue and white.
B.3
Colour Image Coding Scheme with Transparency
This coding scheme is identical to the Colour Image Coding Scheme as defined in appendix B.2, with the following
exception:
-
Entry number C-1in the colour look-up table (CLUT), where C is the number of entries in the CLUT,
defines transparency. Raster image points which point to this entry are transparent, so that the underlying
colour in the display is shown.
The three colour-coding bytes of entry number C-1 in the CLUT are of no importance when referenced from images
using the '22' coding scheme.
NOTE:
Two different descriptors in the EFIMG file with Image Coding Scheme '21' and '22' may point to the same
actual image instance. In that case, the descriptor with Image Coding Scheme '21' would describe an
image where a raster image point pointing to entry number C-1 in the CLUT would have the colour
described in that CLUT entry, while the descriptor with Image Coding Scheme '22' would describe an
image where a raster image point pointing to entry number C-1 in the CLUT is transparent.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
247
ETSI TS 131 102 V13.3.0 (2016-04)
Annex C (informative):
Structure of the Network parameters TLV objects
Structure of the GSM network parameter TLV object, 0<= m <=32
Tag
Length
'A0'
Tag
Currently
Camped
Frequenc
y
'80'
Length
BCCH
Frequenc
y
downlink
'02'
Tag
Neighbour
BCCH
Frequency
Length
BCCH
Neighbour
Frequency
1
BCCH
Neighbour
Frequency
2
…………
BCCH
Neighbour
Frequency
m
'81'
Structure of the FDD network parameter TLV object, 0 <= m <= 32
Tag
Length
'A1'
Tag
Intra
frequency
carrier
'80'
Length
Intra
Frequency
downlink
carrier
Primary
Scrambling
code 1
Primary
Scrambling
code m
Tag
Inter
frequency
carrier
'81'
Lengt
h
Inter
Frequency
downlink
carrier
Primary
Scrambling
code n1
Lengt
h
Inter
Frequency
downlink
carrier
Primary
Scrambling
code n1
Structure of the TDD network parameter TLV object, 0 <= m <= 32
Tag
'A2'
Length
Tag
Intra
frequency
carrier
'80'
Length
Intra
Frequency
downlink
carrier
Primary
Scrambling
code 1
Primary
Scrambling
code m
ETSI
Tag
Inter
frequency
carrier
'81'
3GPP TS 31.102 version 13.3.0 Release 13
248
ETSI TS 131 102 V13.3.0 (2016-04)
Annex D (informative):
Tags defined in 31.102
Tag
'43'
'45'
'53'
Name of Data Element
Full name for network IEI
Short name for network IEI
MBMS Data Object
'53'
MBMS operation response Data Object
The following tags are encapsulated within '53'
'DB'
successful MBMS operation tag
Key Derivation Data Object
The following tags are encapsulated within '73'
'80'
Local Key Establishment Control tag
'81' Counter limit tag
'82' Request MAC tag
'83' NAF_ID tag
'84' Terminal_ID tag
'85' Terminal_appli_ID_tag
'86' UICC_appli_ID tag
'87' RANDx tag
'A0' Key Identifier tag
Key Derivation Operation Response Object
The following tags are encapsulated within '73'
'80'
Local Key Establishment Control tag
'82' Request MAC tag
'73'
'73'
'73'
Usage
PLMN Network Name (EFPNN)
PLMN Network Name (EFPNN)
AUTHENTICATE command parameter,
in MBMS security context
Response to AUTHENTICATE
command, in MBMS security context
AUTHENTICATE command parameter,
in Local Key Establishment security
context
Response to AUTHENTICATE
command, in Local Key Establishment
security context
'80'
'80'
'80'
'80'
Key Availability Check Data Object
The following tags are encapsulated within '73'
'80'
Local Key Establishment Control tag
'A0' Key Identifier tag
NAF_ID tag
NAF Key Centre address tag
Icon Tag (Icon link is URI)
Reauthentication Identity tag
'80'
NAS signalling priority Tag
'80'
MMS Implementation tag
'80'
'80'
'80'
'80'
'80'
IARI TLV TAG
Graphics CSG Type tag (Icon link is URI)
HNB Name tag
PLMN Additional information tag
ICE Free Format Label tag
'80'
HPLMN ProSe Function tag
'80'
'80'
ProSe Group Counter
ProSe ServerAddress tag
'80'
'80'
Home ePDG Identifier TLV
ePDG Selection Information TLV
'80'
Emergency ePDG Identifier TLV
'80'
ePDG Selection Information for Emergency Services TLV
'81'
'81'
'81'
B-TID tag
Icon Tag (Icon link is record number)
Master key tag
'81'
Time Stamp counter tag
AUTHENTICATE command parameter
in Local Key Establishment security
context
ETSI
GBA NAF List (EFGBANL)
NAF Key Centre Address (EFNAFKCA)
Service Provider Name Icon (EFSPNI)
WLAN Reauthentication Identity
(EFWRI)
Non Access Stratum Configuration
(EFNASCONFIG)
MMS User Preference (EFMMSUP)
Multimedia Messages List (EFMML)
UICC IARI (EFUICCIARI)
CSG Type (EFCSGT)
Home NodeB Name (EFHNBN)
PLMN Network Name (EFPNN)
In Case of Emergency – Free Format
(EFICE-FF)
Address of the HPLMN ProSe Function
(EFPROSEFUNC)
Counter for ProSe group (EFPROSE_GC)
Server address for usage information
reports (EFPROSE_UIRC)
Home ePDG Identifier (EFePDGId)
ePDG Selection Information
(EFePDGSelection)
Emergency ePDG Identifier
(EFePDGIdEm)
ePDG Selection Information for
Emergency Services (EFePDGSelectionEm)
GBA NAF List (EFGBANL)
Service Provider Name Icon (EFSPNI)
WLAN Reauthentication Identity
(EFWRI)
MBMS User Key (EFMUK)
3GPP TS 31.102 version 13.3.0 Release 13
249
'81'
'81'
MMS User preference profile name tag
Login Tag
'81'
NMO I Behaviour Tag
'81'
'81'
Graphics CSG Type tag (Icon link is record number)
ICE Free Format Content tag
'81'
'81'
MM File Identifier / SFI tag
ProSe CollectionPeriod tag
'82'
Counter tag
'82'
'82'
MMS User Preference information tag
Password Tag
'82'
Attach with IMSI Tag
'82'
'82'
MM Content Data Object Tag
ProSe ReportingWindow tag
'83'
Data Destination Address Range Tag
'83'
Minimum Periodic Search Timer Tag
'83'
'83'
MM Size tag
ProSe ReportGroupParameters tag
'84'
Bearer Description Tag
'84'
Extended access barring Tag
'84'
'84'
'85'
MM Status tag
ProSe ReportTimeStampsFirstTransmissionAndReception tag
Timer T3245 Behaviour Tag
'85'
'85'
MM Alpha Identifier tag
ProSe ReportDataTransmitted tag
'86'
Override NAS signalling low priority Tag
'86'
ProSe ReportDataReceived tag
'87'
Override Extended access barring Tag
'87'
'88'
ProSe ReportTimeStampsOutOfCoverage tag
Fast First Higher Priority PLMN Search Tag
'88'
'89'
'89'
ProSe ReportLocationInCoverage tag
Text CSG Type tag
E-UTRA Disabling Allowed for EMM cause #15 Tag
'89'
ProSe ReportRadioParameters tag
'8A'
SM RetryWaitTime Tag
'8B'
SM RetryAtRATChange Tag
'A0'
MUK ID tag
The following tags are encapsulated within 'A0'
'80'
MUk IDr tag
'82'
MUk IDi tag
EPS NAS security Context tag
The following tags are encapsulated within 'A0'
'80'
Key set identifier KSIASME Tag
'81'
ASME key (KASME) Tag
'82'
Uplink NAS count Tag
'A0'
ETSI TS 131 102 V13.3.0 (2016-04)
MMS User Preference (EFMMSUP)
Network Connectivity Parameters for
USIM IP connections (EFNCP-IP)
Non Access Stratum Configuration
(EFNASCONFIG)
CSG Type (EFCSGT)
In Case of Emergency – Free Format
(EFICE-FF)
Multimedia Messages List (EFMML)
Collection Period Parameter
(EFPROSE_UIRC)
WLAN Reauthentication Identity
(EFWRI)
MMS User Preference (EFMMSUP)
Network Connectivity Parameters for
USIM IP connections (EFNCP-IP)
Non Access Stratum Configuration
(EFNASCONFIG)
Multimedia Messages List (EFMML)
Reporting Window Parameter
(EFPROSE_UIRC)
Network Connectivity Parameters for
USIM IP connections (EFNCP-IP)
Non Access Stratum Configuration
(EFNASCONFIG)
Multimedia Messages List (EFMML)
Reporting Parameter for Goups
(EFPROSE_UIRC)
Network Connectivity Parameters for
USIM IP connections (EFNCP-IP)
Non Access Stratum Configuration
(EFNASCONFIG)
Multimedia Messages List (EFMML)
Reporting Parameter (EFPROSE_UIRC)
Non Access Stratum Configuration
(EFNASCONFIG)
Multimedia Messages List (EFMML)
Reporting Parameter for transmitted
Data (EFPROSE_UIRC)
Non Access Stratum Configuration
(EFNASCONFIG)
Reporting Parameter for received Data
(EFPROSE_UIRC)
Non Access Stratum Configuration
(EFNASCONFIG)
Reporting Parameter (EFPROSE_UIRC)
Non Access Stratum Configuration
(EFNASCONFIG)
Reporting Parameter (EFPROSE_UIRC)
CSG Type (EFCSGT)
Non Access Stratum Configuration
(EFNASCONFIG)
Reporting Parameter for Radio
Parameters (EFPROSE_UIRC)
Non Access Stratum Configuration
(EFNASCONFIG)
Non Access Stratum Configuration
(EFNASCONFIG)
MBMS User Key (EFMUK)
EPS NAS Security Context (EFEPSPSC)
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
'A0'
'A0'
'A0'
'A0'
'A0'
'A0'
'A0'
'A0'
'A0'
'A0'
'A0'
'A0'
'A0'
'A0'
'A0'
250
'83'
Downlink NAS count Tag
'84'
Identifiers of selected NAS integrity and encryption
algorithms Tag
CSG List TLV object tag
The following tags are encapsulated within 'A0'
'80'
PLMN tag
'81'
CSG Information tag
GSM cell information
The following tags are encapsulated within 'A0':
'80'
GSM Camping Frequency Information data object
'81'
GSM Neighbour Frequency Information data object
Operator CSG List TLV object Tag
The following tags are encapsulated within 'A0'
'80'
PLMN Tag
'81'
CSG Information Tag
'82'
CSG Display indicator tag
ProSe Discovery monitoring parameters
The following tags are encapsulated within 'A0':
'80'
PLMN tag
'81'
RFU
'82'
Model tag
ProSe Discovery announcing parameters
The following tags are encapsulated within 'A0':
'80'
PLMN tag
'81'
Range tag
'82'
Model tag
ProSe Policy parameters
The following tags are encapsulated within 'A0':
'80'
ProSe Layer-2 Group ID tag
'81'
ProSe UE ID tag
'82'
ProSe Group IP multicast address tag
'83'
Address type tag
'84'
Ipv4 address as source tag
'85'
Group related security tag
'86'
Application Layer Group ID tag
ProSe PLMN Parameters tag
The following tags are encapsulated within 'A0'
'80' PLMN tag
'81'
Direct communication authorisation tag
ProSe Direct Communication parameters tag
The following tags are encapsulated within 'A0'
'80'
Geographical Area – Polygon tag
'81'
Radio parameters tag
ProSe Radio parameters tag
The following tags are encapsulated within 'A0'
'80'
Geographical Area – Polygon tag
'81'
Radio parameters tag
ProSe Radio parameters tag
The following tags are encapsulated within 'A0'
'80'
Geographical Area – Polygon tag
'81'
Radio parameters tag
ACDC OS tag
ACDC App Id tag
The following tags are encapsulated within 'A0'
'80'
ACDC category tag
'81'
OS App Id tag
Group member discovery parameters tag
The following tags are encapsulated within 'A0'
'80'
User Info ID tag
'81'
Discovery Group ID tag
'82'
Application Layer Group ID tag
ProSe Relay Parameters tag
The following tags are encapsulated within 'A0'
'80'
PLMN tag
'81'
Relay type tag
Remote UE parameters tag
The following tags are encapsulated within 'A0'
'80'
Relay Service Code tag
ETSI
ETSI TS 131 102 V13.3.0 (2016-04)
Allowed CSG List (EFACSGL)
Network Parameters (EFNETPAR)
Operator CSG Lists (EFOCSGL)
ProSe Monitoring Parameters
(EFPROSE_MON)
ProSe Announcing Parameters
(EFPROSE_ANN)
ProSe Policy Parameters
(EFPROSE_POLICY)
ProSe PLMN Parameters
(EFPROSE_PRMN)
ProSe Direct Communication Radio
Parameters (EF PROSE_RADIO_COM)
ProSe Direct Discovery Monitoring
Radio Parameters (EFPROSE_RADIO_MON)
ProSe Direct Discovery Announcing
Radio Parameters (EFPROSE_RADIO_ANN)
ACDC List (EFACDC_LIST)
ACDC OS Configuration
(EFACDC_OS_CONFIG)
ProSe Group Member Discovery
Parameters (EFPROSE_GM_DISCOVERY)
ProSe Relay Parameters
(EFPROSE_RELAY)
ProSe Relay Discovery Parameters
(EFPROSE_RELAY_DISCOVERY)
3GPP TS 31.102 version 13.3.0 Release 13
251
'DB'
'DB'
'DB'
'DC'
'DD'
'DD'
'81'
User Info ID of Relay tag
'82'
IP Versions tag
'83'
Security content tag
FDD cell information
The following tags are encapsulated within 'A1':
'80'
FDD Intra Frequency Information data object
'81'
FDD Inter Frequency Information data object
Relay parameters tag
The following tags are encapsulated within 'A0'
'80'
Relay Service Code tag
'81'
PDN type tag
'82'
APN tag
'83'
ProSe Relay UE ID tag
'84'
Security content tag
TDD frequency information
The following tags are encapsulated within 'A2':
'80'
TDD Intra Frequency Information data object
'81'
TDD Inter Frequency Information data object
Service provider display information
The following tags are encapsulated within 'A3':
'80'
Service provider PLMN list
Indicator for type 1 EFs (amount of records equal to master EF)
The following tags are encapsulated within 'A8':
'C0' EFADN data object
'C1' EFIAP data object
'C3' EFSNE data object
'C4' EFANR data object
'C5' EFPBC data object
'C6' EFGRP data object
'C9' EFUID data object
'CA' EFEMAIL data object
'CC' EFPURI data object
Indicator for type 2 EFs (EFs linked via the index administration file)
The following tags are encapsulated within 'A9':
'C3' EFSNE data object
'C4' EFANR data object
'CA' EFEMAIL data object
'CC' EFPURI data object
Indicator for type 3 EFs (EFs addressed inside an object using a
record identifier as a pointer)
The following tags are encapsulated within 'AA':
'C2' EFEXT1 data object
'C7' EFAAS data object
'C8' EFGAS data object
'CB' EFCCP1 data object
MMS Connectivity Parameters:
The following are encapsulated under "AB":
'80' MMS Implementation Tag
'81' MMS Relay/Server Tag
'82' Interface to core network and bearer Tag
'83' Gateway Tag
'84' Reserved for 3GPP2: MMS Authentication Mechanism Tag
'85' Reserved for 3GPP2: MMS Authentication User Name Tag
Successful 3G authentication
Successful VGCS/VBS operation authentication tag
Successful GBA operation tag
Synchronisation failure
Access Point Name
GBA Security Context Bootstrapping Mode tag
'DE'
GBA Security Context NAF Derivation Mode tag
'A1'
'A1'
'A2'
'A3'
'A8'
'A9'
'AA'
'AB'
NOTE:
ETSI TS 131 102 V13.3.0 (2016-04)
Network Parameters (EFNETPAR)
ProSe Relay Discovery Parameters
(EFPROSE_RELAY_DISCOVERY)
Network Parameters (EFNETPAR)
Service Provider Display Information
(EFSPDI)
Phone Book Reference File (EFPBR)
Phone Book Reference File (EFPBR)
Phone Book Reference File (EFPBR)
MMS Connectivity Parameters
(EFMMSICP / EFMMSUCP)
Response to AUTHENTICATE
Response to AUTHENTICATE
Response to AUTHENTICATE
Response to AUTHENTICATE
APN Control List (EFACL)
AUTHENTICATE command parameter,
in GBA security context
Response to AUTHENTICATE
the value 'FF' is an invalid tag value. For ASN.1 tag assignment rules see ISO/IEC 8825-1 [35]
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
252
ETSI TS 131 102 V13.3.0 (2016-04)
Annex E (informative):
Suggested contents of the EFs at pre-personalization
If EFs have an unassigned value, it may not be clear from the main text what this value should be. This annex suggests
values in these cases.
File Identification
'2F00'
'2F05'
'2F06'
'2F08'
'2FE2'
'4F01'
'4F01'
'4F01'
'4F02'
'4F02'
'4F03'
'4F03'
'4F04'
'4F04'
'4F05'
'4F05'
'4F06'
'4F07'
'4F08'
'4F09'
'4F10'
'4F11'
'4F12'
'4F13'
'4F14'
'4F20'
"4F20"
'4FXX'
'4FXX'
'4F21'
'4FXX'
'4F22'
'4F23'
'4F24'
'4F30'
'4F30'
'4F31'
'4FXX'
'4FXX'
"4F52"
'4F63'
'4F64'
'4FXX'
'4FXX'
'4FXX'
'4FXX'
'4FXX'
'4FXX'
'4FXX'
'4FXX'
Description
Application directory
Preferred languages
Access rule reference
UICC Maximum Power Consumption
ICC identification
ProSe Monitoring Parameters
ACDC List
MCPTT Service Table
ProSe Announcing Parameters
MCPTT UE configuration data
HPLMN ProSe Function
MCPTT User configuration data
ProSe Direct Communication Radio
Parameters
MCPTT Group configuration data
ProSe Direct Discovery Monitoring Radio
Parameters
MCPTT Service configuration data
ProSe Direct Discovery Announcing Radio
Parameters
ProSe Policy Parameters
ProSe PLMN Parameters
ProSe Group Counter
ProSe Service Table
ProSe
UsageInformationReportingConfiguration
ProSe Group Member Discovery Parameters
ProSe Relay Parameters
ProSe Relay Discovery Parameters
Image data
GSM Ciphering key Kc
Image instance data files
ACDC OS Configuration
ICE graphics
Unique identifier
Phone book synchronisation counter
Change counter
Previous unique identifier
Phone book reference file
SoLSA Access Indicator
SoLSA LSA List
LSA Descriptor files
Capability configuration parameters 1
GPRS Ciphring key KcGPRS
CPBCCH Information
Investigation PLMN scan
E-mail addresses
Additional number alpha string
Second name entry
Abbreviated dialling numbers
Grouping file
Grouping information alpha string
Phone book control
Index administration phone book
ETSI
Value
Card issuer/operator dependent
'FF…FF'
Card issuer/operator dependent
Card issuer/operator dependent
operator dependent
Operator dependent
Operator dependent
'0000'
Operator dependent
Operator dependent
Operator dependent
Operator dependent
Operator dependent
Operator dependent
Operator dependent
Operator dependent
Operator dependent
Operator dependent
Operator dependent
'FF…FF'
Operator dependent
Operator dependent
Operator dependent
Operator dependent
Operator dependent
'00FF...FF'
'FF...FF07'
'FF…FF'
Operator dependent
'FF…FF'
'0000'
'00000000'
'0000'
'0000'
Operator dependent
'00FF...FF'
'FF...FF'
'FF…FF'
'FF…FF'
'FF...FF07'
'FF..FF'
'00'
'FF…FF'
'FF…FF'
'FF…FF'
'FF...FF'
'00…00'
'FF…FF'
'0000'
'FF…FF'
3GPP TS 31.102 version 13.3.0 Release 13
'4FXX'
'4FXX'
'4F41'
'4F42'
'4F43'
'4F44'
'4F45'
'4F46'
'4F47'
'4F47'
'4F48'
'4F48'
'4F49'
'4F4A'
'4F4B'
'4F81'
'4F82'
'4F83'
'4F84'
'4F85'
'4F86'
'6F05'
'6F06'
'6F07'
'6F08'
'6F09'
'6F2C'
'6F31'
'6F32'
'6F37'
'6F38'
'6F39'
'6F3B'
'6F3C'
'6F3E'
'6F3F'
'6F40'
'6F41'
'6F42'
'6F43'
'6F45'
'6F46'
'6F47'
'6F48'
'6F49'
'6F4B'
'6F4C'
'6F4D'
'6F4E'
'6F4F'
'6F50'
'6F54'
'6F55'
'6F56'
'6F57'
'6F58'
'6F5B'
'6F5C'
'6F60'
253
Additional number
Extension 1
Pseudonym
User Controlled PLMN selector for I-WLAN
Operator Controlled PLMN selector for IWLAN
User Controlled WSID list
Operator controlled WSID list
WLAN Reauthentication Identity
Home I-WLAN Specific Identifier List
Multimedia Messages List
I-WLAN Equivalent HPLMN Presentation
Indication
Multimedia Messages Data File
I-WLAN HPLMN Indication
I-WLAN Last Registered PLMN
HPLMN Direct Access Indicator
Allowed CSG lists
CSG Type
HNB name
Operator CSG lists
Operator CSG Type
Operator HNB name
Language indication
Access rule reference (under ADFUSIM and
DFTELECOM)
IMSI
Ciphering and integrity keys
Ciphering and integrity keys for packet
switched domain
De-personalization control keys
Higher Priority PLMN search period
Co-operative network list
ACM maximum value
USIM service table
Accumulated call meter
Fixed dialling numbers
Short messages
Group identifier level 1
Group identifier level 2
MSISDN storage
PUCT
SMS parameters
SMS status
CBMI
Service provider name
Short message status reports
CBMID
Service Dialling Numbers
Extension 2
Extension 3
Barred Dialling Numbers
Extension 5
Capability configuration parameters 2
CBMIR
SetUp Menu Elements
Extension 4
Enabled services table
Access point name control list
Comparison method information
Initialisation value for Hyperframe number
Maximum value of START
User controlled PLMN selector with Access
Technology
ETSI
ETSI TS 131 102 V13.3.0 (2016-04)
'FF…FF'
'00FF...FF'
'0000FF…FF'
'FF…FF'
Operator dependent
'00FF…FF'
Operator dependent
'FF…FF'
Operator dependent
'FF…FF'
Operator dependent
'FF…FF'
Operator dependent
'FFFFFF'
Operator dependent
Operator dependent
Operator dependent
Operator dependent
Operator dependent
Operator dependent
Operator dependent
'FF…FF'
Card issuer/operator dependent
Operator dependent
'07FF…FF'
'07FF…FF'
'FF…FF'
'FF'
'FF…FF'
'000000' (see note 1)
Operator dependent
'000000'
'FF...FF'
'00FF...FF'
Operator dependent
Operator dependent
'FF...FF'
'FFFFFF0000'
'FF...FF'
'FF...FF'
'FF...FF'
Operator dependent
'00FF…FF'
'FF...FF'
'FF...FF'
'00FF...FF'
'00FF...FF'
'FF...FF'
'00FF...FF'
'FF...FF'
'FF...FF'
Operator dependent
'00FF...FF'
Operator dependent
'00FF…FF'
'FF…FF'
'F0 00 00 F0 00 00'
Operator dependent
'FFFFFF0000..FFFFFF0000'
3GPP TS 31.102 version 13.3.0 Release 13
'6F61'
'6F62'
'6F73'
'6F78'
'6F7B'
'6F7E
'6F80'
'6F81'
'6F82'
'6F83'
'6FAD'
'6FB1'
'6FB2'
'6FB3'
'6FB4'
'6FB5'
'6FB6'
'6FB7'
'6FC3'
'6FC4'
'6FC5'
'6FC6'
'6FC7'
'6FC8'
'6FC9'
'6FCA'
'6FCB'
'6FCC'
'6FCD'
'6FCE'
'6FCF'
'6FD0'
'6FD1'
'6FD2'
'6FD3'
'6FD4'
'6FD5'
'6FD6'
'6FD7'
'6FD8'
'6FD9'
'6FDA'
'6FDB'
'6FDC'
'6FDD'
'6FDE'
'6FDF'
'6FE0'
'6FE1'
'6FE2'
254
Operator controlled PLMN selector with
Access Technology
HPLMN selector with Access Technology
Packet switched location information
'6FE3'
Access control class
Forbidden PLMNs
Location information
Incoming call information
Outgoing call information
Incoming call timer
Outgoing call timer
Administrative data
Voice Group Call Service
Voice Group Call Service Status
Voice Broadcast Service
Voice Broadcast Service Status
EMLPP
AaeM
Emergency call codes
Key for hidden phone book entries
Network Parameters
PLMN Network Name
Operator Network List
Mailbox Dialling Numbers
Extension 6
Mailbox Identifier
Message Waiting Indication Status
Call Forwarding Indication Status
Extension 7
Service Provider Display Information
MMS Notification
Extension 8
MMS Issuer Connectivity Parameters
MMS User Preferences
MMS User Connectivity Parameters
Network's Indication of Alerting (NIA)
Voice Group Call Service Ciphering Algorithm
Voice Broadcast Service Ciphering Algorithm
GBA Bootstrapping parameters
MBMS Service Keys List
MBMS User Key
EHPLMN
GBA NAF List
EHPLMN Presentation Indication
Last RPLMN Selection Indication
NAF Key Centre Address
Service Provider Name Icon
PLMN Network Name Icon
In Case of Emergency – Dialling Number
In Case of Emergency – Free Format
Network Connectivity Parameters for UICC IP
connections
EPS location information
'6FE4'
'6FE5'
'6FE6'
EPS NAS Security Context
Public Service Identity of the SM-SC
USAT Facility Control
'6FE7'
'6FE8'
'6FE9'
'6FEA'
UICC IARI
Non Access Stratum Configuration
UICC certificate
Relay Node ID
ETSI
ETSI TS 131 102 V13.3.0 (2016-04)
'FFFFFF0000..FFFFFF0000'
'FFFFFF0000..FFFFFF0000'
'FFFFFFFF FFFFFF xxxxxx 0000 FF 01' (see
note 2)
Operator dependent
'FF...FF'
'FFFFFFFF xxxxxx 0000 FF 01' (see note 2)
'FF…FF 000000 00 01FFFF'
'FF…FF 000000 01FFFF'
'000000'
'000000'
Operator dependent
Operator dependent
Operator dependent
Operator dependent
Operator dependent
Operator dependent
'00'
Operator dependent
'FF…FF'
'FF…FF'
Operator dependent
Operator dependent
Operator dependent
'00 FF...FF'
Operator dependent
'00 00 00 00 00'
'xx 00 FF...FF'
'00 FF...FF'
'00 00 00 FF…FF'
'00FF...FF'
'FF…FF'
'FF…FF'
'FF…FF'
'FF...FF'
'00…00'
'00…00'
'FF…FF'
'FF…FF'
'FF…FF'
'FF…FF' or xxxxxx (see Note 2)
'FF…FF'
'00'
'00'
'FF…FF'
'00 FF…FF'
'00 FF…FF'
Operator dependent
Operator dependent
Operator dependent
'FFFFFFFFFFFFFFFFFFFFFFFF xxxxxx0000
01' (see note 2)
'FF…FF'
Operator dependent
'80 1E 60 C0 1E 90 00 80 04 00 00 00
00 00 00 00 00 F0 00 00 00 00 40 00
00 00 00 00 00 80'
Operator dependent
Operator dependent
Card Issuer / Operator dependent
Operator dependent
3GPP TS 31.102 version 13.3.0 Release 13
255
'6FEB'
'6FEC'
'6FED'
'6FEE'
'6FEF'
"6FF0"
Max value of Secure Channel counter
Public Warning System
FDN URI
BDN URI
SDN URI
IMEI(SV) White List
"6FF1"
"6FF2"
'6FF3'
'6FF4'
"6FF5"
"6FF6"
IMEI(SV) Pairing Status
IMEI(SV) Pairing Devices
Home ePDG Identifier
ePDG Selection Information
Emergency ePDG Identifier
ePDG Selection Information for Emergency
Services
ETSI TS 131 102 V13.3.0 (2016-04)
FF..FF
Operator dependent
'FF…FF'
'FF…FF'
'FF…FF'
Operator dependent (at least 1 range of
IMEI(SV) values)
'FF…FF'
'FF…FF'
'FF…FF'
'FF…FF'
'FF…FF'
'FF…FF'
NOTE 1: The value '000000' means that ACMmax is not valid, i.e. there is no restriction on the ACM. When
assigning a value to ACMmax, care should be taken not to use values too close to the maximum possible
value 'FFFFFF', because the INCREASE command does not update EFACM if the units to be added would
exceed 'FFFFFF'. This could affect the call termination procedure of the Advice of Charge function.
NOTE 2: xxxxxx stands for any valid MCC and MNC, coded according to TS 24.008 [9].
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
256
ETSI TS 131 102 V13.3.0 (2016-04)
Annex F (informative):
Examples of coding of LSA Descriptor files for SoLSA
The length of all the records is determined by the LSA descriptor containing the largest number of bytes. Combinations
containing different numbers of LSa IDs, LAC+ CI and CI or LAC can therefore be done. Various examples are show.
Due to the OTA management of the records it is recommended that the record length is maximum 100 bytes in order to
leave room for command descriptor and signature information in the SMS.
This first example contains two LSAs, one described by two LSa IDs and another described by three Cell IDs, giving a
record length of 8 bytes.
st
1 record:
2
nd
record:
LSA descriptor
type = LSA ID
and number = 2
(1 byte)
LSA ID (3 bytes)
LSA ID (3 bytes)
Identifier (1 byte)
LSA descriptor
type = CI and
number = 3
(1 byte)
CI (2 bytes)
CI (2 bytes)
CI (2 bytes)
Identifier (1 byte)
The second example contains two LSAs, one described by one LSA ID and one described by two Cell Ids, giving a
record length of 6 bytes.
st
1 record:
2
nd
record:
LSA descriptor
type = LSA ID
and number = 1
(1 byte)
LSA ID (3 bytes)
'FF'
Identifier (1 byte)
LSA descriptor
type = CI and
number = 2
(1 byte)
CI (2 bytes)
CI (2 bytes)
Identifier (1 byte)
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
257
ETSI TS 131 102 V13.3.0 (2016-04)
Annex G (informative):
Phonebook Example
This example phonebook has more than 254 entries. Additional number (3 additional numbers) information, second
name and e-mail information can be added to each ADN entry. In addition each entry has a 2 byte Unique ID (UID)
attached to it. The phonebook also contains three files that are shared EFEXT1, EFAAS and EFGAS. These files are
addressed from inside a file. EFEXT1 is addressed via EFADN, EFADN1, EFAAS is addressed via EFANRA, EFANRA1, EFANRB,
EFANRB1, EFANRC, EFANRC1 and EFGAS is addressed via EFGRP, EFGRP1. The phonebook supports two levels of grouping
and hidden entries in EFPBC.
Two records are needed in the phonebook reference file PBR '4F30' for supporting more than 254 entries. The content
of the phonebook reference file PBR '4F30' records is as shown in table G.2. The structure of the DFPHONEBOOK is shown
in table G.1.
The content of phonebook entries in the range from 1-508 is described in the tables G.3 and G.4.
Table G.1: Structure of EFs inside DFPHONEBOOK
DFPHONEBOOK
'5F3A'
Common Files
EFPBR
'4F30'
EFEXT1
'4F4A'
EFAAS
'4F4B'
EFGAS
'4F4C'
EFPSC
'4F22'
EFCC
'4F23'
EFPUID
'4F24'
EFADN
'4F3A'
EFPBC
'4F09'
EFANRA
'4F11'
EFANRB
'4F13'
EFEMAIL
'4F50'
EFSNE
'4F19'
EFUID
'4F21'
EFGRP
'4F26'
EFADN1
'4F3B'
EFPBC1
'4F0A'
EFANRA1
'4F12'
EFANRB1
'4F14'
EFEMAIL1
'4F51'
EFSNE1
'4F1A'
EFUID1
'4F20'
EFGRP1
'4F25'
PhoneBook Set1
EFPURI
'4F54'
EFANRC
'4F15'
PhoneBook Set2
EFPURI1
'4F55'
ETSI
EFANRC1
'4F16'
3GPP TS 31.102 version 13.3.0 Release 13
258
ETSI TS 131 102 V13.3.0 (2016-04)
Table G.2: Contents of EFPBR
Rec 1 Tag'A8' L='2D'
(for Phonebook Set1)
Tag'C0' L='03' '4F3A'
'01'
Tag'C5' L='03' '4F09'
'02'
Tag'C6' L='03' '4F26'
'03'
Tag'C4' L='03' '4F11'
'04'
Tag'C4' L='03' '4F13'
'05'
Tag'C4' L='03' '4F15'
'06'
Tag'C3' L='03' '4F19'
'07'
Tag'C9' L='03' '4F21'
'12'
Tag'CA' L='03' '4F50'
'09'
Tag'CC' L='03' '4F54'
'16'
Tag'C7' L='03' '4F4B'
'14'
Tag'C8' L='03' '4F4C'
'15'
Tag'AA' L='0F'
Tag'C2' L='03' '4F4A'
Rec 2 Tag'A8' L='2D'
'08'
(for Phonebook Set 2)
Tag'C0' L='03' '4F3B'
'0A'
Tag'C5' L='03' '4F0A'
'0B'
Tag'C6' L='03' '4F25'
'0C'
Tag'C4' L='03' '4F12'
'0D
Tag'C4' L='03' '4F14'
'0E'
Tag'C4' L='03' '4F16'
'0F'
Tag'C3' L='03' '4F1A'
'10'
Tag'C9' L='03' '4F20'
'13'
Tag'CA' L='03' '4F51'
'11'
Tag'CC L='03' '4F55'
'
'17'
Tag'C7' L='03' '4F4B'
'14'
Tag'C8' L='03' "4F4C
'15'
Tag'AA' L='0F'
Tag'C2' L='03' '4F4A'
'08'
Table G.3: Structure of the 254 first entries in the phonebook
Phone
book
entry
#1
#2
ADN
PBC
GRP
ANRA
ANRB
ANRC
'4F3A'
'4F09'
'4F26'
'4F11'
'4F13'
'4F15'
SFI '01'
SFI '02' SFI '03' SFI '04' SFI '05' SFI '06'
ADN
EXT1
Hidden Rec n°1 ANRA
ANRB
ANRC
Content Ident. (AID rec Rec n°3 Rec n°1 Rec n°1 Rec n°1
Bytes
(Byte
N° 3)
'00'
(1X+14):
(X+13)) Rec '02'
SNE
'4F19'
SFI '07'
Second
Name
Alpha
String
ADN
EXT1
Content Ident.
Bytes
(Byte
(1X+14):
(X+13)) Rec '2A'
Second
Name
Alpha
String
Not
Hidden
Rec n°2 ANRA
ANRB
ANRC
Rec n°1 Rec n°2 Rec n°2 Rec n°2
Rec n°3
#3
:
:
:
# 254
ETSI
UID
EXT1
'4F21'
'4F4A'
SFI '12' SFI '08'
UID
Rec '02'
UID
AAS
GAS
EMAIL
PUR
'4F4B'
'4F4C'
'4F50'
'4F54
SFI '14' SFI '15' SFI '09' SFI '1
Record
Record
email
SIP
numbers no.'s as address URI/T
defined
as
L UR
defined in in GRP
the
ANRs
Rec '2A' Record
Record
email
SIP
numbers no.'s as address URI/T
defined
as
L UR
defined in in GRP
the
ANRs
3GPP TS 31.102 version 13.3.0 Release 13
259
ETSI TS 131 102 V13.3.0 (2016-04)
Table G.4: Structure of phone book entries 255 to 508 (Rec 1-254)
Phone
book
entry
#255
#256
ADN1
PBC1
GRP1 ANRA1
'4F3B'
'4F0A'
'4F25'
'4F12'
SFI '0A'
SFI '0B' SFI '0C' SFI '0D'
ADN
EXT1
Hidden Rec n°1 ANRA1
Content Ident.
(AID
Rec n°3 Rec n°1
Bytes
(Byte
Rec n°
'00'
(1X+14):
3)
(X+13)) Rec '03'
ADN
EXT1
Content Ident.
Bytes
(Byte
(1X+14):
(X+13)) Rec '2B'
Not
Hidden
ANRB1
'4F14'
SFI '0E'
ANRB1
Rec n°1
ANRC1
'4F16'
SFI '0F'
ANRC1
Rec n°1
SNE1
'4F1A'
SFI '10'
Second
Name
Alpha
String
Rec n°2 ANRA1 ANRB1 ANRC1
Rec n°1 Rec n°2 Rec n°2 Rec n°2
Rec n°3
Second
Name
Alpha
String
#257
:
:
:
#508
ETSI
UID1
EXT1
'4F20'
'4F4A'
SFI '13' SFI '08'
UID
Rec '03'
UID
AAS
GAS
EMAIL1 PUR
'4F4B'
'4F4C'
'4F51'
'4F55
SFI '14' SFI '15' SFI '11' SFI '1
Record
Record
email
SIP
numbers no.'s as address URI/T
defined
as
L UR
in
defined in
GRP1
the
ANRs
Rec '2B' Record
Record
email
SIP
numbers no.'s as address URI/T
defined
as
L UR
in
defined in
GRP1
the
ANRs
3GPP TS 31.102 version 13.3.0 Release 13
260
ETSI TS 131 102 V13.3.0 (2016-04)
Figure G.1: Structure and Relations of the Example Phone Book
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
261
ETSI TS 131 102 V13.3.0 (2016-04)
Annex H (normative):
List of SFI Values
This annex lists SFI values assigned in the present document.
H.1
List of SFI Values at the USIM ADF Level
File Identification
SFI
Description
'6FB7'
'01'
Emergency call codes
'6F05'
'02'
Language indication
'6FAD'
'03'
Administrative data
'6F38'
'04'
USIM service table
'6F56'
'05'
Enabled services table
'6F78'
'06'
Access control class
'6F07'
'07'
IMSI
'6F08'
'08'
Ciphering and integrity keys
'6F09'
'09'
Ciphering and integrity keys for packet switched domain
'6F60'
'0A'
User PLMN selector
'6F7E
'0B'
Location information
'6F73'
'0C'
Packet switched location information
'6F7B'
'0D'
Forbidden PLMNs
'6F48'
'0E'
CBMID
'6F5B'
'0F'
Hyperframe number
'6F5C'
'10'
Maximum value of hyperframe number
'6F61'
'11'
Operator PLMN selector
'6F31'
'12'
Higher Priority PLMN search period
'6F62'
'13'
Preferred HPLMN access technology
'6F80'
'14'
Incoming call information
'6F81'
'15'
Outgoing call information
'6F4F'
'16'
Capability configuration parameters 2
'6F06'
'17'
Access Rule Reference
'6FC5'
'19'
PLMN Network Name
'6FC6'
'1A'
Operator Network List
'6FCD'
'1B'
Service Provider Display Information
"6F39"
"1C"
Accumulated Call Meter (see note)
'6FD9'
'1D'
Equivalent HPLMN
'6FE3'
'1E'
EPS location information
'6FE4'
'18'
EPS NAS Security Context
NOTE:
When used the value "1C" shall be used as SFI for EFACM, for compatibility reasons the terminal shall
accept other values.
All other SFI values are reserved for future use.
H.2
List of SFI Values at the DF GSM-ACCESS Level
File Identification
'4F20'
'4F52'
SFI
'01'
'02'
Description
GSM Ciphering Key Kc
GPRS Ciphering Key KcGPRS
All other SFI values are reserved for future use.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
H.3
262
ETSI TS 131 102 V13.3.0 (2016-04)
List of SFI Values at the DF WLAN Level
File Identification
'4F41'
'4F42'
'4F43'
'4F44'
'4F45'
'4F46'
'4F47'
'4F48'
'4F49'
'4F4A'
'4F4B'
SFI
'01'
'02'
'03'
'04'
'05'
'06'
'07'
'08'
'09'
'0A'
'0B'
Description
Pseudonym
User controlled PLMN for WLAN
Operator controlled PLMN for WLAN
User controlled WSID list
Operator controlled WSID list
WLAN Reauthentication Identity
Home I-WLAN Specific Identifier List
I-WLAN Equivalent HPLMN Presentation Indication
I-WLAN HPLMN Priority Indication
I-WLAN Last Registered PLMN
HPLMN Direct Access Indicator
All other SFI values are reserved for future use.
H.4
List of SFI Values at the DF HNB Level
File Identification
'4F81'
'4F82'
'4F83'
'4F84'
'4F85'
'4F86'
SFI
'01'
'02'
'03'
'04'
'05'
'06'
Description
Allowed CSG lists
CSG Type
HNB name
Operator CSG lists
Operator CSG Type
Operator HNB name
All other SFI values are reserved for future use.
H.5
List of SFI Values at the DF ProSe Level
File Identification
'4F01'
'4F02'
'4F03'
'4F04'
'4F05'
'4F06'
'4F07'
'4F08'
'4F09'
'4F10'
'4F11'
'4F12'
'4F13'
'4F14'
SFI
'01'
'02'
'03'
'04'
'05'
'06'
'07'
'08'
'09'
'10'
'11'
'12'
'13'
'14'
Description
ProSe Monitoring Parameters
ProSe Announcing Parameters
HPLMN ProSe Function
ProSe Direct Communication Radio Parameters
ProSe Direct Discovery Monitoring Radio Parameters
ProSe Direct Discovery Announcing Radio Parameters
ProSe Policy Parameters
ProSe PLMN Parameters
ProSe Group Counter
ProSe Service Table
ProSe UsageInformationReportingConfiguration
ProSe Group Member Discovery Parameters
ProSe Relay Parameters
ProSe Relay Discovery Parameters
All other SFI values are reserved for future use.
H.6
List of SFI Values at the DF ACDC Level
File Identification
'4F01'
SFI
'01'
Description
ACDC List
Other SFI values can be allocated to various EFACDC_OS_CONFIG: these are listed inside EFACDC_LIST.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
H.7
263
ETSI TS 131 102 V13.3.0 (2016-04)
List of SFI Values at the DF MCPTT Level
File Identification
'4F01'
'4F02'
'4F03'
'4F04'
'4F05'
SFI
'01'
'02'
'03'
'04'
'05'
Description
MCPTT Service Table
MCPTT UE configuration data
MCPTT User configuration data
MCPTT Group configuration data
MCPTT Service configuration data
All other SFI values are reserved for future use.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
264
ETSI TS 131 102 V13.3.0 (2016-04)
Annex I (informative):
USIM Application Session Activation/Termination
The purpose of this annex is to illustrate the different Application Session procedures.
Terminal
Application selection
UICC
Select AID=USIM
(P2='00')
…
Select File
Id
Application initialisation
procedure
Read Binary
…
Application initialisation
procedure is terminated
Status
(P1='01')
Figure I.1 USIM Application Session Activation procedure
Terminal
Application
termination procedure
is started
UICC
Status
(P1='02')
…
Select File
Id
Application termination
procedure
Update Binary
…
Select AID=USIM
(P2='4X')
Application closure
Figure I.2 USIM Application Session Termination procedure
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
265
ETSI TS 131 102 V13.3.0 (2016-04)
Annex J (informative):
Example of MMS coding
This annex gives an example for the coding of MMS User Preferences, while the MMS User Information Preference
parameters are coded according to the WAP implementation of MMS.
J.1
Coding example for MMS User Preferences
0x80 MMS Implementation Tag
0x01 (Length = "1")
0x01 (MMS implementation information = "(WAP")
0x81 MMS User Preference Profile Name Tag
0x0E (Length = "14")
43 68 72 69 73 74 6D 61 73 20 43 61 72 64
(profile name = "Christmas Card"; 14 characters, 14 Bytes)
0x82 MMS User Information Preference Information Tag
0x19 (Length = "25")
0x14 0x80 (visibility: = "hide"; 2 Bytes)
0x06 0x80 (delivery report: = "yes"; 2 Bytes)
0x10 0x80 (read-reply: = "yes"; 2 Bytes)
0x0F 0x81 (priority: = "normal"; 2 Bytes)
0x07 0x07 0x80 0x05 0x11 0x22 0x33 0x44 0x55
(Delivery-Time-Tag, Value-Length, Absolute-Token-Tag, Date-Value-Length, Date-Value; 9 Bytes)
0x08 0x06 0x81 0x04 0x55 0x22 0x33 0x44
(Expiry Tag, Value-Length, Relative-Token-Tag, Delta-Second-Value-Length, Delta-Second-Value; 8
Bytes)
J.2
Coding Example for MMS Issuer/User Connectivity
Parameters
0xAB MMS Connectivity Parameters Tag
0x81 0x88 (Length = "136") (Length bytes greater than 127 are coded onto 2 bytes according to ISO/IEC 8825-1 [35])
0x80 MMS Implementation Tag
0x01 (Length = "1")
0x01 (MMS implementation information = "WAP"; 1 Byte)
0x81 MMS Relay/Server Tag
0x17 (Length = "23")
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
266
ETSI TS 131 102 V13.3.0 (2016-04)
0x68 0x74 0x74 0x70 0x3A 0x2F 0x2F 0x6D 0x6D 0x73 0x2D 0x6F 0x70 0x65 0x72 0x61 0x74
0x6F 0x72 0x2E 0x63 0x6F 0x6D
(MMS Relay/Server information = "http://mms-operator.com"; 23 characters; 23 Bytes)
0x82 Interface to Core Network and Bearer Tag
0x32 (Length = "50")
0x10 0xAA (bearer = "GSM-CSD"; 2 Bytes)
0x08 0x2B 0x34 0x39 0x35 0x33 0x34 0x31 0x39 0x30 0x36 0x00
(address = "+495341906", 12 Bytes)
0x09 0x87 (type of address = "E164"; 2 Bytes)
0x25 0xC5 (speed = "autobauding"; 2 Bytes)
0x0A 0x90 (call type = "ANALOG_MODEM"; 2 Bytes)
0x0C 0x9A (authentication type = "PAP"; 2 Bytes)
0x0D 0x64 0x75 0x6D 0x6D 0x79 0x11 0x6E 0x61 0x6D 0x65 0x00
(authentication id = "dummy_name"; 12 Bytes)
0x0E 0x64 0x75 0x6D 0x6D 0x79 0x11 0x70 0x61 0x73 0x73 0x77 0x6F 0x72 0x64 0x00
(authentication pw = "dummy_password"; 16 Bytes)
0x83 Gateway Tag
0x36 (Length = "54")
0x20 0x31 0x37 0x30 0x2E 0x31 0x38 0x37 0x2E 0x35 0x31 0x2E 0x33 0x00
(address = "170.187.51.3"; 14 Bytes)
0x21 0x85 (type of address = "IPv4"; 2 Bytes)
0x23 0x39 0x32 0x30 0x33 0x00 (port = "9203"; 6 Bytes)
0x24 0xCB (service = "CO-WSP"; 2 Bytes)
0x19 0x9C (authentication type = "HTTP BASIC"; 2 Bytes)
0x1A 0x64 0x75 0x6D 0x6D 0x79 0x11 0x6E 0x61 0x6D 0x65 0x00
(authentication id = "dummy_name"; 12 Bytes)
0x1B 0x64 0x75 0x6D 0x6D 0x79 0x11 0x70 0x61 0x73 0x73 0x77 0x6F 0x72 0x64 0x00
(authentication pw = "dummy_password"; 16 Bytes)
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
267
ETSI TS 131 102 V13.3.0 (2016-04)
Annex K (informative):
Examples of VService_Id coding
This annex gives examples for the coding of VService_Id,
It is assumed that:
-
acknowledgement flag bit is set to 0;
-
the call priority bits are set to 0.
GroupId
00000000
00000001
00000012
00000123
00001234
00012345
00123456
01234567
12345678
99999999
13452670
Content of EFVBS or EFVGCs
F0FFFFFF
F1FFFFFF
21FFFFFF
21F3FFFF
2143FFFF
2143F5FF
214365FF
214365F7
21436587
99999999
31546207
VService_Id(vbs)
00000000
00000020
00000180
00000F60
00009A40
00060720
003C4800
025AD0E0
178C29C0
BEBC1FE0
19A8AFC0
ETSI
VService_Id(vgcs)
00000010
00000030
00000190
00000F70
00009A50
00060730
003C4810
025AD0F0
178C29D0
BEBC1FF0
19A8AFD0
3GPP TS 31.102 version 13.3.0 Release 13
268
ETSI TS 131 102 V13.3.0 (2016-04)
Annex L : USIM-INI and USIM-RN for Relay Nodes
(normative)
L.1
Introduction
USIM-RN and USIM-INI are used for Relay Node network connections establishment.
USIM-INI, if present on the UICC, and USIM-RN include at least all mandatory files defined for a USIM in the present
document, with the exception of files related to emergency calls.
Editor"s note: It is FFS whether the list of files mandatory to support can be reduced further.
USIM-INI is only required in case of a certificate based solution as described in TS 33.401 [52].
For the certificate-based solution, the UICC shall support BIP-UICC server mode (see TS 31.111 [12]) and may support
the Inter-Chip USB UICC/terminal interface (see TS 31.101 [11]) to perform the TLS handshake.
The USIM-RN is used to ensure a one to one binding with the Relay Node. The security architecture for Relay Nodes is
defined in TS 33.401 [52].
L.2
Application selection procedure
Application selection is performed according to the procedures defined in clause 5.1.1.1. The following provisions
apply:
When using pre-shared keys, only a USIM-RN is required, and the Relay Node will establish directly a secure channel
with USIM-RN. It is assumed that the Relay Node knows the "3G application code" within the PIX value reserved for
3GPP USIM-RN.
When using certificate based procedure, the UICC inserted in the Relay Node shall contains two USIMs, the USIM-RN
and USIM-INI. In case initial provisioning is required, the Relay Node will first select USIM-INI, either by direct
application selection or by use of the EF_DIR file.
1. Direct application selection: with full or with partial AID. It is assumed that the Relay Node knows the "3G
application code" within the PIX value reserved for 3GPP USIM-INI.
2. By use of the EF_DIR file: The Relay Node identifies the USIM-INI, which is characterised by an AID with a
"3G application code" within the PIX value reserved for 3GPP USIM-INI, see TS 31.101 [11], and selects the
USIM-INI by AID. The AID of the USIM-RN is characterised by an AID with a "3G application code" within
the PIX value reserved for 3GPP USIM-RN, see TS 31.101 [11]. If the only applications present in EF_DIR are
a USIM-RN and a USIM-INI, the terminal omits user presentation and proceeds to application selection.
The USIM applications USIM-INI and USIM-RN are not simultaneously active. USIM-INI is used to establish an
initial network connection and USIM-INI is deactivated once the network related operations are finished. USIM-INI is
deactivated prior to activating USIM-RN.
USIM-INI may be selected on any logical channel, see TS 31.101 [11]. Prior to selecting USIM-RN a new logical
channel shall be opened using the MANAGE CHANNEL command as specified in TS 31.101 [11], an application to
application secure channel can only be established on a logical channel different from channel 0. USIM-RN is then
selected on the new logical channel.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
269
ETSI TS 131 102 V13.3.0 (2016-04)
USIM-RN shall be configured to support implicit and explicit application selection. The Relay Node will first select
USIM-INI, according to the application selection mechanisms specified in TS 31.101 [11]. When the USIM-RN is
selected explicitly, the Relay Node shall send a SELECT by AID APDU command in clear text prior to secure channel
establishment. The implicit selection mechanism is performed by specifying USIM-RN AID in the MANAGE
SECURE CHANNEL – Establish Master SA command.
L.3
Secure channel operation
The USIM-RN shall allow communication only via "Secured APDU" secure channel as defined in ETSI TS 102 484
[66].
NOTE: The above implies in particular that the AUTHENTICATE command to the USIM-RN is not executed
outside the secure channel.In case the pre-shared key solution is used to establish the secure channel only the USIM-RN
is required for establishing the connection, and the Relay Node will establish directly a secure channel with the USIMRN before attaching to the network. The initial network connection using USIM-INI is not required in this case, and
hence USIM-INI is not required.
In case the certificate based solution is used, the UICC inserted in the Relay Node shall contain two USIMs, USIM-RN
and USIM-INI. A TLS handshake shall be used to provide key material for the Master SA for the secured APDU
protocol, according to ETSI TS 102 484 [66].
L.4
Support of commands
The Relay Node may limit the set of APDU commands encapsulated in TRANSACT DATA command to the strict
minimum (READ BINARY, READ RECORD, SELECT, STATUS, UPDATE BINARY, UPDATE RECORD,
AUTHENTICATE).
The Relay Node and the UICC shall support letter class 'e' toolkit commands for BIP, see TS 31.111 [12]. In order to
support toolkit the TERMINAL PROFILE, TERMINAL RESPONSE, ENVELOPE and FETCH commands need to be
supported. These commands are not issued on the secure channel. According to TS 31.111 [12], USAT commands shall
be sent on logical channel 0.
L.5
Storage of certificates
If the UICC supports the certificate based procedure, the UICC shall be provisioned with the UICC certificate and the
root certificate. The UICC certificate, which is used as a server certificate in the TLS handshake, is stored in EFCERT in
USIM-INI as it needs to be accessed by the RN for reading the CRL distribution point before establishing the secure
channel, for details cf. TS 33.401 [52]. The root certificate, which is used to verify the RN certificate in the TLS
handshake, is only needed for UICC-internal purposes and need not be stored in an EF.
L.6
Relay Node files support
L.6.1
USIM-INI Files
L.6.1.1
EFCERT (UICC Certificate)
This file contains the UICC Certificate.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
Identifier: '6FE9'
270
Structure: transparent
File size: N bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
ETSI TS 131 102 V13.3.0 (2016-04)
Update activity: low
ALW
ADM
ADM
ADM
Bytes
Description
X
UICC Certificate
The format is as specified in TS 33.401 [52].
L.6.2
L.6.2.1
Optional
M/O
M
Length
X
USIM-RN Files
eFRNid (Relay Node identifier)
This EF contains the Relay Node identifier the USIM-RN is bound to, see TS 33.401 [52].
An USIM-RN shall contain this file. The content of this file is not intended to be read on UICC-RN interface. It serves
as a storage location for the Relay Node identifier to which the UICC is bound. The file content is described for the
purpose of Over-The-Air update.
Identifier: '6FEA'
Structure: transparent
File size: N bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
NOTE:
Optional
Update activity: low
ADM
ADM
ADM
ADM
Description
Country Tag '80'
Country Length = 2
Country code (ASCII characters)
Organization Tag '81'
Organization Length
Organization name (characters coded in UTF8)
Common Name Tag '82'
Common Name Length
Common Name (characters coded in UTF8)
Serial Number Tag '82'
Serial Number Length
Serial Number (characters coded in ASCII)
C: if the Tag is present, this is mandatory
ETSI
M/O
O
C
C
M
M
M
Length
1 byte
1 byte
2 bytes
1 byte
1 byte
K bytes
M
M
M
O
C
C
1 byte
1 byte
L bytes
1 byte
1 byte
M bytes
3GPP TS 31.102 version 13.3.0 Release 13
L.6.2.2
271
ETSI TS 131 102 V13.3.0 (2016-04)
EFSCCmax (maximum value of Secure Channel Counter)
This EF contains the maximum number of transaction allowed with the same Connection SA, when a secure channel is
established. When the counter value in TRANSACT DATA command reaches the maximum value, the terminal shall
derive new key material using Manage Secure Channel APDU – establish SA – Connection SA, see ETSI TS 102.484
[66].
An USIM with an Application ID in the USIM-RN range shall contain this file.
Identifier: '6FEB'
Structure: transparent
File size: 8 bytes
Access Conditions:
READ
UPDATE
DEACTIVATE
ACTIVATE
Bytes
8
NOTE:
Optional
Update activity: low
ALW
ADM
ADM
ADM
Description
Secure Channel counter
M/O
M
Length
8 byte
The value of the Secure channel counter is set at personalisation. It is not intended to be updated or modified
as a result of establishing a new Connection SA.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
272
ETSI TS 131 102 V13.3.0 (2016-04)
Annex M : USIM application dedicated for IOPS (normative)
M.1
Introduction
IOPS allows to provide network service to Public Safety users even in the case the network has no or only limited
backhaul connectivity. One of the main issues in such cases is the missing backhaul to perform authentication. A
solution has been defined by using local HSSs which take over the responsibility for authentication in IOPS mode.
A problem identified for IOPS security when making use of local HSS is the higher probability of a compromise of a
local HSS. Therefore the security solution described in TS 33.401 uses a local HSS with different authentication
credentials than the standard HSS in normal operation. Additionally there might be several local HSSs and to further
reduce the impact of possible compromised local HSSs, each local HSS should use different authentication credentials.
The security solution described in 3GPP TS 33.401 [52] is based on a USIM application dedicated for IOPS and using
derived individual keys per local HSS.
3GPP TS 23.401 [69] Annex K specifies a PLMN identity dedicated for IOPS mode of operation. Additionally a USIM
dedicated for IOPS uses an Access Control Class of '11' or '15'.
M.2
Features of the USIM dedicated for IOPS
The USIM dedicated for IOPS may be implemented as a single USIM on a UICC or as a secondary USIM application
together with a normal USIM on one UICC. The USIM for IOPS is a regular USIM application and contains all
mandatory EFs for a USIM and may also include any of the optional EFs defined for a USIM.
The USIM dedicated for IOPS nevertheless has some specifics:
- As specified in 3GPP TS 23.401 [69] Annex K, the Access Control Class in EFACC is set to either '11' or '15'. The
specific values for the Access Control Class prevent UEs with different Access Control Classes from trying to
attach to the IOPS network.
- The entry for the USIM dedicated for IOPS in EFDIR has a label starting with 'USIM-IOPS'.
In case multiple local HSSs are to be supported, The USIM should also support:
- The AMF (Authentication Management Field) mechanism as described in 3GPP TS 33.401 [52] Annex F.4.1 is
supported.
- An Operator specific mechanism to derive local HSS individual keys is supported (see 3GPP TS 33.401 [52]
Annex F.4).
NOTE:
M.3
The mechanism to derive local HSS specific keys in the USIM dedicated for IOPS is specific to an
Operator and needs to be agreed for the local HSS and the USIM. One example mechanism is described
in 3GPP TS 33.401 [52] Annex F.4.2.
Selection mechanisms
The method for selecting a USIM dedicated for IOPS is left to ME implementation.
ETSI
3GPP TS 31.102 version 13.3.0 Release 13
273
ETSI TS 131 102 V13.3.0 (2016-04)
Annex N (informative):
Change history
The table below indicates all CRs that have been incorporated into the present document since it was initially approved.
TSG # /
Date
TP-27
TP-27
TSG Doc.
WG doc
CR
Rev
Cat
TP-050018
T3-050189
0264
1
F
CT-28
CT-28
CP-050136
CP-050139
C6-050402
C6-050370
0277
0272
A
CT-28
CT-28
CT-28
CT-28
CT-28
CT-28
CT-28
CT-29
CT-29
CT-30
CT-30
CT-31
CP-050139
CP-050139
CP-050139
CP-050139
CP-050139
CP-050139
CP-050139
CP-050460
CP-050460
CP-050499
CP-050499
CP-060018
C6-050372
C6-050374
C6-050376
C6-050404
C6-050478
C6-050483
C6-050406
C6-050689
C6-050729
C6-050876
C6-050898
C6-060158
0285
0280
0282
0287
0289
0291
0278
0294
0295
0298
0297
0304
A
A
A
A
A
A
F
F
F
F
A
A
2
2
1
CT-31
CP-060023
C6-060119
0299
C
CT-31
CT-31
CT-31
CT-32
CT-32
CT-33
CP-060023
CP-060023
CP-060156
CP-060239
CP-060239
CP-060385
C6-060122
C6-060184
C6-060121
C6-060277
C6-060279
C6-060601
0302
0305
0301
0308
0310
0318
1
F
C
A
A
a
F
CT-34
CT-34
CT-34
CT-34
CP-060541
CP-060541
CP-060541
CP-060541
C6-060781
C6-060808
C6-060785
C6-060764
0320
0322
0324
0327
1
2
1
-
A
A
A
A
CT-34
CT-34
CT-35
CT-35
CT-35
CT-35
CT-36
CT-36
CT-36
2007-06
CT-37
CT-37
CT-38
CT-38
CT-38
CT-39
CT-39
CT-39
CT-39
CP-060541
CP-060547
CP-070072
CP-070067
CP-070067
CP-070071
CP-070305
CP-070299
CP-070464
CP-070620
CP-070611
CP-070840
CP-070840
CP-070841
CP-080166
CP-080167
CP-080168
CP-080168
C6-060817
C6-060788
C6-070059
C6-070120
C6-070133
C6-070123
C6-070311
C6-070310
C6-070417
C6-070434
C6-070523
C6-070586
C6-070884
C6-080063
C6-080059
C6-080014
C6-080064
0332
0331
0340
0334
0336
0339
0341
0349
0350
0347
0352
0355
0354
0343
0365
0362
0360
0366
2
2
1
1
1
1
3
5
1
1
1
A
F
F
B
B
A
B
F
A
B
A
F
F
B
A
A
F
B
CT-39
CP-080168
C6-080070
0357
3
B
CT-40
CT-41
CT-41
CT-41
CP-080385
CP-080582
CP-080642
CP-080642
C6-080147
C6-080273
C6-080266
C6-080289
0368
0372
0373
0375
1
2
2
F
A
B
B
1
-
Subject/Comment
Creation of Rel-7 version based on v6.9.0
Correction to overcome IMSI number space limitation – inclusion
of EHPLMN
ISO/IEC 7816-series revision
Essential correction of the phonebook (access to mapped filed &
"hidden key" coding)
Added EF_ARR under DF_TELECOM
Modifications regarding WLAN
Alignment of MBMS procedures with TS 33.246
Number of stored MSKs
Essential correction of phonebook support
Corrections to eMLPP and AAeM
Correction to EF-HPLMN
Clarification on ADM access condition
Editorial corrections
Clarifications in DF_PHONEBOOK level
NAF Id alignment with TS 33.246
Addition of mandatory UST services id references for
VGCS/VBS security context definition
Change to allow PNN segmentation of the HPLMN and
EHPLMN support
Indication of services in the USIM
Correction of service numbers associated to the UST
Padding of VSTK_RAND
MCC Completion of implementation of C6-060184
USAT related procedures - Additional Terminal Profile
VService_Id coding examples
Essential correction of the authenticate command in order to
process message longer than 255 bytes
Correction of the MSK Update procedures
Clarification of the USIM behavior when MSK key is not updated
Correction of MBMS Security Context description
Correction of the references to a non-exisiting table in
Authenticate command description
Correction of the MUK Update procedures
Correction of the Tables in section 7.1.2.5
Correction of the EHPLMN SFI
Presentation of EHPLMN
Last RPLMN Selection Indication
MSK management procedures
Presentation of additional information in manual selection mode
Correction of EF-IMG and EF-IIDF
GBA NAF Keys and MUKs storage policy
Correction to implementation of '0x' as '04' in 7.1.2.5 (MCC)
Key Establishment mechanism: alignment with TS 33.110
Inconsistency in the MSK update procedures
Correction of reference to 3GPP TS 23.140
Completion of missing "Terminal Applications" entry in the UST
Reservation of parameters for OMA BCAST Smart Card Profile
MBMS security – Authentication error 9866
Add the support of EHPLMN in the automatic network selection
Correction of UST due to error in CR implementation
Correction of typo in the description of one of the fields of
EFMBI.
Storage of SPN and PNN in graphic format
Note: changes to clauses 5.3.10 and 5.3.24 have been moved to
new sections with appropriate names.
Clarification of content of EFUID
Authentication of GBA
Introduction of ICE information in the UICC
Configuration of Network Connectivity parameters for UICC
ETSI
New
7.0.0
7.0.0
7.1.0
7.1.0
7.1.0
7.1.0
7.1.0
7.1.0
7.1.0
7.1.0
7.1.0
7.2.0
7.2.0
7.3.0
7.3.0
7.4.0
7.4.0
7.4.0
7.4.0
7.4.0
7.4.1
7.5.0
7.5.0
7.6.0
7.7.0
7.7.0
7.7.0
7.7.0
7.7.0
7.7.0
7.8.0
7.8.0
7.8.0
7.8.0
7.9.0
7.9.0
7.9.0
7.9.1
7.10.0
7.10.0
7.11.0
7.11.0
8.0.0
8.1.0
8.1.0
8.1.0
8.1.0
8.1.0
8.2.0
8.3.0
8.3.0
8.3.0
3GPP TS 31.102 version 13.3.0 Release 13
274
CT-41
CT-42
CT-42
CT-42
CT-42
CP-080642
CP-080904
CP-080904
CP-080904
CP-080909
C6-080245
C6-080469
C6-080468
C6-080444
C6-080409
0376
0374
0380
0382
0383
5
4
1
-
B
B
B
B
F
CT-42
CT-43
CT-43
CT-43
CT-43
CT-43
CP-080961
CP-090188
CP-090188
CP-090188
CP-090192
CP-090198
-------------C6-090007
C6-090056
C6-090077
C6-090074
C6-090080
0385
0386
0387
0390
0388
0384
2
1
1
5
B
F
F
B
B
F
CT-44
CP-090451
C6-090110
0391
-
F
CT-44
CP-090451
C6-090188
0392
2
F
CT-44
CT-44
CT-44
CT-44
CT-44
CT-45
CT-45
CT-45
CT-45
CT-45
CT-46
CT-46
CP-090479
CP-090479
CP-090451
CP-090451
CP-090451
CP-090712
CP-090712
CP-090713
CP-090714
CP-090714
CP-090991
CP-090991
----------------------------C6-090112
C6-090116
C6-090160
C6-090305
C6-090301
C6-090309
C6-090304
C6-090307
C6-090415
C6-090423
0396
0398
0399
0400
0405
0402
0406
0409
0412
0416
0423
0428
2
2
1
1
2
3
2
-
D
A
F
F
C
F
F
F
F
B
F
D
CT-46
CT-46
CT-46
CT-47
CT-47
CT-47
CT-47
CT-48
CT-49
CP-090992
CP-090990
CP-090990
CP-100187
CP-100187
CP-100188
CP-100189
CP-100391
CP-100585
C6-090440
C6-090460
C6-090500
C6-100031
C6-100055
C6-100111
C6-100115
C6-100260
C6-100403
0425
0410
0427
0429
0431
0432
0433
0434
0446
3
1
1
A
B
A
F
F
B
B
F
A
CT-49
CT-49
CT-49
CT-50
CT-50
CT-50
CT-50
CT-50
CT-51
CT-51
CT-51
CT-51
CT-51
CT-51
CT-51
CT-51
CT-52
CT-52
CT-53
CT-53
CT-53
CT-55
CT-55
CT-55
CT-55
CT-55
CT-55
CT-56
CT-56
CT-57
CT-58
CP-100586
CP-100587
CP-100587
CP-100826
CP-100827
CP-100827
CP-100826
CP-100823
CP-110236
CP-110239
CP-110244
CP-110244
CP-110242
CP-110297
CP-110302
CP-110235
CP-110516
CP-110527
CP-110593
CP-110703
CP-110595
CP-120173
CP-120143
CP-120181
CP-120145
CP-120145
CP-120145
CP-120385
CP-120386
CP-120620
CP-120866
C6-100358
C6-100328
C6-100387
C6-100596
C6-100617
C6-100618
C6-100643
C6-1006428
C6-110191
C6-110062
C6-110089
C6-110064
C6-110092
0443
0438
0439
0450
0448
0451
0466
0462
0464
0467
0469
0470
0471
0472
0473
0475
0482
0479
0483
0485
0484
0503
0504
0510
0509
0511
0512
0516
0519
0535
0546
C6-110160
----------------------------C6-110414
C6-110411
C6-120074
C6-120091
C6-120096
C6-120100
C6-120221
C6-120277
C6-120440
C6-120565
1
1
1
1
1
5
1
1
1
3
7
1
2
3
2
2
1
1
1
1
1
A
F
F
F
F
F
A
B
B
B
B
D
F
B
B
B
A
C
A
F
F
A
D
A
A
A
A
A
B
A
A
ETSI TS 131 102 V13.3.0 (2016-04)
remote IP connections
Introduction of new access technologies for LTE
Storage of EPS Mobility Management parameters
USIM provisioning for home (e)NodeB
Support for LTE in the EF-Operator PLMN
Correction to Example for MMS Issuer/User Connectivity
Parameters
Addition of I-WLAN related files and procedures
Removal of KNASint and KNASenc in EFEPSNSC
Correction of EF EPSNSC
Support of EPS in USAT: extension of Call control
HPLMN Direct Access Indicator for I-WLAN
Correction of Network Connectivity parameters for UICC remote
IP connections (Email approval)
correction of coding of suggested contents of the EF_EPSLOCI
at pre-personalization
correction of update status via Data Download or USAT
Application for EF_EPSLOCI and EF_EPSNSC
Editorial modifications of File structure overview
Correction of wrong file names
Removal of NH and NCC parameters from EFEPSNSC
Correction for EPS in USIM security related procedures
Allowed CSG List updateable by ME
eCALL related enhancements
Correction of coding of CSG ID
Essential correction of EFSPDI encoding
Align files at Telecom level according to TS 102 222
Support For Multimode System Selection Storage
Correction to application session termination
Editorial correction on tables in NAF Key Centre tag and NAF
Key Centre information
Correction of incorrect tag value
Introduction of operator controlled CSG list for H(e)NB
Correction of Allowed CSG list
Correction to EF_ACSGL access condition
Correction to informative Annex D
Introduction of Indicator for Inhibition of Allowed CSG List
Introduction of ICE (In Case of Emergency) graphics files
ICE graphics related procedure
Introduction of an ISIM EF to support Public Service Identity for
SMS over IP
Update of reference to ETSI TS 102 483
Alignment of HNB and HeNB to the service requirements
Update reference to 3GPP2 specifications
Correction to Issuer specified PIN for ICE files
Allocation of File ID for EF_ICE-graphics
ETSI SCP specification reference update
Correction of EF_EPSNSC content description
Communication control for IMS procedures in USIM
Introduction of Smart Card Web Server launch functionality
Addition of an EF for USAT facility control
Addition of 'Extended Terminal Application' support in EF_UST
Correction to coding of EF_MMSICP
CSG lists display Control
Introduction of the IARI list in the USIM
Non-Access Stratum (NAS) configuration parameters
Procedures for Relay Node USIM
Essential correction to EPS NAS security context update
Priority for NAS configuration parameters
Clarification of ACL in EPS Network
Correction to NAS configuration parameters coding
Correction of service required for EF-EST to be present
Correction of EF_ICON references in EF_LAUNCH_SCWS
Corrections in the section DFs at the USIM ADF level
Correction to Allowed CSG list and Operator CSG list coding
Update of reference to ETSI TS 102 484
Correction to EF_UICCIARI section number
FID allocation and other corrections to USIM for Relay Nodes
Correction to reference for CSG Type in EFCSGT
Adding new NAS configuration parameter for SIMTC
Update of reference to ASN.1 coding specification
Correction of update activity for EF_MSK
ETSI
8.3.0
8.4.0
8.4.0
8.4.0
8.4.0
8.4.0
8.5.0
8.5.0
8.5.0
8.5.0
8.5.0
8.6.0
8.6.0
8.6.0
8.6.0
8.6.0
8.6.0
8.6.0
8.7.0
8.7.0
8.7.0
9.0.0
9.0.0
9.1.0
9.1.0
9.1.0
9.1.0
9.1.0
9.2.0
9.2.0
9.2.0
9.2.0
9.3.0
9.4.0
9.4.0
9.4.0
9.4.0
9.5.0
9.5.0
9.5.0
9.5.0
10.0.0
10.1.0
10.1.0
10.1.0
10.1.0
10.1.0
10.1.0
10.1.0
10.1.0
10.2.0
10.2.0
10.3.0
10.3.0
11.0.0
11.1.0
11.1.0
11.1.0
11.1.0
11.1.0
11.1.0
11.2.0
11.2.0
11.3.0
11.4.0
3GPP TS 31.102 version 13.3.0 Release 13
275
CT-58
CT-58
CT-58
CT-60
CT-60
CP-120867
CP-120867
CP-120867
CP-130361
CP-130362
C6-120610
C6-120574
C6-120604
C6-130196
C6-130170
0536
0539
0517
0558
0552
2
1
2
1
1
A
A
B
A
D
CT-61
CT-61
CP-130530
CP-130531
C6-130379
C6-130384
0562
0565
2
2
A
F
CT-62
CT-63
CT-63
CT-63
CT-64
CT-64
CT-64
CP-130794
CP-140161
CP-140161
CP-140162
CP-140423
CP-140431
CP-140432
C6-130537
C6-140077
C6-140109
C6-140080
C6-140278
C6-140231
C6-140271
0567
0572
0571
0569
0568
0581
0573
CT-64
CT-65
CT-65
CT-65
CP-140441
CP-140699
CP-140699
CP-140699
C6-140280
C6-140472
C6-140477
C6-140482
CT-65
CT-65
CP-140699
CP-140699
CT-65
1
B
B
B
B
B
F
F
0580
0588
0587
0593
1
1
1
1
F
B
B
B
C6-140491
C6-140492
0589
0590
2
2
B
B
CP-140699
C6-140493
0591
2
B
CT-65
CP-140699
C6-140494
0592
2
B
CT-65
CP-140700
C6-140495
0600
1
C
CT-65
CP-140701
C6-140504
0595
2
A
CT-65
CT-65
CT-66
CT-66
CT-66
CT-66
CT-66
CP-140703
CP-140708
CP-140955
CP-140955
CP-140955
CP-140955
CP-140955
C6-140505
C6-140502
C6-140624
C6-140710
C6-140711
C6-140724
C6-140726
0586
0601
0602
0604
0605
0603
0611
3
2
1
2
3
B
F
D
F
F
F
B
CT-66
CT-66
CT-66
CT-66
CT-66
CP-140956
CP-140956
CP-140957
CP-140957
CP-140957
C6-140722
C6-140723
C6-140727
C6-140728
C6-140729
0609
0610
0597
0598
0596
1
1
6
6
3
C
C
B
B
B
CT-67
CT-67
CT-67
CT-67
CP-150154
CP-150154
CP-150154
CP-150154
C6-150077
C6-150078
C6-150081
C6-150082
0613
0614
0616
0615
1
1
1
1
F
C
B
B
CT-67
CT-67
CT-67
CT-68
CT-68
CP-150155
CP-150156
CP-150180
CP-150382
CP-150383
C6-150096
C6-150100
3
3
2
C6-150203
C6-150205
0617
0622
0612
0626
0627
B
F
F
F
F
CT-68
CT-68
CT-68
CT-68
CT-69
CP-150379
CP-150384
CP-150381
CP-150394
CP-150563
C6-150267
C6-150274
C6-150290
C6-150311
C6-150423
0635
0625
0628
0629
0638
1
1
1
2
A
F
B
B
F
CT-69
CT-69
CT-69
CT-70
CT-70
CT-70
CT-70
CT-71
CP-150563
CP-150563
CP-150561
CP-150830
CP-150829
CP-150832
CP-150833
CP-160149
C6-150468
C6-150464
C6-150478
C6-150608
C6-150618
C6-150635
C6-150637
C6-160105
0639
0641
0648
0659
0645
0637
0651
0688
1
1
C
B
A
A
F
B
B
B
1
4
1
3
2
4
1
1
ETSI TS 131 102 V13.3.0 (2016-04)
HPLMN or RPLMN selection clarification
Clarification for CSG Display Control during manual selection
Addition of EF with PWS configuration
Essential correction of CSG Type coding description
Correction of file name for User controlled PLMN selector for
WLAN in the WLAN related procedure
Handling of Multiple CSG ID display indicators for same PLMN id
Usage of SMS record identifier of EFSMSR as pattern for
SEARCH RECORD
Fast higher priority PLMN search upon entering VPLMN
Addition of POLL INTERVAL ENVELOPE command
Presence detection due to active PDP context
URI support for USIM Phonebook
New UICC service in UST for URI support
New UICC service in UST for URI support
Addition of configuration parameter for EMM cause #15
extension
Correction of length coding for EFPSEUDO
Addition of DF for ProSe configuration
Enablement of ProSe functionality for Public Safety
Addition of EFs with monitoring and announcing information for
ProSe Direct Discovery
Addition of a EF with IP address of the ProSe Function
Addition of EF with radio parameters for public safety ProSe
direct communication in out of coverage scenario
Addition of EF with policy parameters for public safety ProSe
direct services in out of coverage scenario
Addition of EF with parameters for public safety ProSe direct
communication for PLMNs different from HPLMN
Removal of USIM Service Table Service for Poll Interval
Negotiation
'Override NAS signalling low priority' and 'Override Extended
access barring' linkage
Extension of URI support by USIM services
Correction of change request implementation errors
Removal of editor's notes for ProSe files
Changes to ProSe Radio Parameters for Direct Communication
Changes for ProSe Policy Parameters
Removal of unnecessary items in ProSe parameters
Addition of EF to store PTK ID and counter for ProSe direct
communication
Extension of URI support by USIM BDN service
Extension of URI support by USIM SDN service
USAT Pairing whitelist file
USAT Application Pairing: Pairing Status and IMEISV Files
USAT Application Pairing for MTC device reference and
procedure
Removal of circles geographical areas
ProSe Service Table
ProSe Direct Communication usage monitoring
Addition of services for ProSe Direct Communication usage
information storage and reporting
Addition of UE configuration parameters for SM Retry restriction
Correction of Annex D list of tags
Clarification of Direct Communication Radio Parameters
Geographical Area in Direct Communication Radio Parameters
Clarification of text for UE configuration parameters for SM Retry
restriction
Correct file access conditions to activate/deactivate
Correction for FDN and BDN usage in case of IMS
URI support for SMS indicator in UST
Support of Enhanced IMS Call Control by USIM
Clarification to the applicability of the UE retry wait time value or
behaviour
Replacement of EF LAUNCH SCWS with EF LAUNCH PAD
UICC interface in Power Saving Mode (PSM)
Alignment of EFs at the MF level with TS 31.101
Alignment of the EFIPS record length
Correction of EF NASconfig
ePDG Configuration Information
UICC interface during eDRX
Addition of ACDC configuration parameters
ETSI
11.4.0
11.4.0
11.4.0
11.5.0
12.0.0
12.1.0
12.1.0
12.2.0
12.3.0
12.3.0
12.3.0
12.4.0
12.4.0
12.4.0
12.4.0
12.5.0
12.5.0
12.5.0
12.5.0
12.5.0
12.5.0
12.5.0
12.5.0
12.5.0
12.5.0
12.5.0
12.6.0
12.6.0
12.6.0
12.6.0
12.6.0
12.6.0
12.6.0
12.6.0
12.6.0
12.6.0
12.7.0
12.7.0
12.7.0
12.7.0
12.7.0
12.7.0
12.7.0
12.8.0
12.8.0
12.8.0
12.8.1
13.0.0
13.0.0
13.1.0
13.1.0
13.1.0
13.1.0
13.2.0
13.2.0
13.2.0
13.2.0
13.3.0
3GPP TS 31.102 version 13.3.0 Release 13
276
CT-71
CT-71
CP-160148
CP-160148
C6-160028
C6-160029
0666
0667
F
B
CT-71
CT-71
CT-71
CT-71
CT-71
CT-71
CT-71
CT-71
CT-71
CT-71
CT-71
CP-160148
CP-160148
CP-160148
CP-160148
CP-160148
CP-160148
CP-160147
CP-160146
CP-160143
CP-160145
CP-160150
C6-160066
C6-160067
C6-160068
C6-160069
C6-160070
C6-160071
C6-160103
C6-160091
C6-160042
C6-160052
C6-160058
0664
0665
0668
0669
0675
0676
0680
0679
0674
0670
0672
1
1
1
1
1
1
3
1
1
1
B
B
B
B
B
B
B
B
D
C
B
CT-71
CP-160141
C6-160094
0682
1
A
CT-71
CT-71
CT-71
CT-71
CP-160144
CP-160144
CP-160144
CP-160144
C6-160041
C6-160056
C6-160077
C6-160107
0673
0677
0663
0671
1
2
2
D
F
F
F
ETSI TS 131 102 V13.3.0 (2016-04)
Update of ProSe ReportGroupParameters in EF-PROSE_UIRC
Authorization for one-to-one direct communcation when not
served by E-UTRAN
Addition of model for direct discovery for public safety.
Addition of radio parameters for ProSe Direct Discovery
Authorization for one-to-one direct communication
Addition of Application Layer Group ID
Addition of ProSe discovery parameters
Addition of ProSe relay configuration
USIM application dedicated for IOPS
Addition of MCPTT related parameters
Editorial modification of EF-PROSE_GC
Making Local Phone Book Optional
ePDG Configuration Information for Emergency Services over
WLAN
Essential correction of EF-EPSNSC for invalid stored EPS NAS
security context
Editorial correction to EF-NASCONFIG
ePDG Configuration Information alignment with SA2 agreement
Correction of presence condition of EFPNN and EFOPL
Correction to UICC interface in PSM
ETSI
13.3.0
13.3.0
13.3.0
13.3.0
13.3.0
13.3.0
13.3.0
13.3.0
13.3.0
13.3.0
13.3.0
13.3.0
13.3.0
13.3.0
13.3.0
13.3.0
13.3.0
13.3.0
3GPP TS 31.102 version 13.3.0 Release 13
277
History
Document history
V13.2.0
January 2016
Publication
V13.3.0
April 2016
Publication
ETSI
ETSI TS 131 102 V13.3.0 (2016-04)