Data Sheet
Cisco MCS 7825-H3 Unified Communications Manager
Appliance
Cisco Unified Communications Solutions unify voice, video, data, and mobile applications
on fixed and mobile networks enabling easy collaboration every time from any workspace.
Product Overview
The Cisco MCS 7825-H3 Unified Communications Manager Appliance is an integral part of a
complete, scalable architecture for a new generation of high-quality unified communications
solutions that operate on enterprise data networks. A solution that is easy to deploy and highly
cost-effective, this powerful platform delivers the high performance and availability that today’s
enterprise networks demand. The server appliance is preinstalled with an operating system and
the Cisco Unified Communications Manager application. Cisco Unified Communications Manager
is fully operational upon startup, requiring entry of just a few configuration variables such as IP
address and domain.
Key Features and Benefits
Performance
The Cisco MCS 7825-H3 is a robust, highly available server platform designed to support today’s
unified communications applications. It uses a single Intel 3050 2.13-GHz processor.
Serviceability
Serviceable SATA Disk Drives
The Cisco MCS 7825-H3 is configured with two 160-GB Serial Advanced Technology Attachment
(SATA) “cold-pluggable” disk drives, which are accessible through openings in the front bezel of
the server. If a drive fails, you can schedule server downtime, power down the server, and replace
the failed SATA drive by simply removing it (each drive is equipped with a front latch that positively
mates the drive to the server) and replacing it with an unconfigured spare drive.
DAT Tape Drive Support
The Cisco MCS 7825-H3 can support a 36/72-GB universal-serial-bus (USB) external Digital Audio
Tape (DAT) drive (part number DAT-USB-EXT-72=) or an optional 36/72-GB USB rack-mount DAT
drive (part number DAT-USB-RM-72=). This tape drive connects through one of the USB 2.0 ports
provided by the Cisco MCS 7825-H3 server.
Product Specifications
Tables 1 and 2 give specifications of the Cisco MCS 7825-H3.
Table 1.
Product Specifications
Component
Value
Product part number
MCS7825H3-K9-CMC1
Preload
Cisco Unified Communications Manager 7.0
OS
Included
© 1992-2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 6
Data Sheet
Processor
Single Intel Dual Core 3050 2.13 GHz
Memory
2-GB (two 1-GB) PC2-5300 error-correcting-code (ECC) double-data-rate 2 (DDR2)
Hard disks
Two 160-GB SATA 2.5-inch cold-swap drives configured using Redundant Array of Independent
Disks (RAID) 1
Remote management
HP Integrated Lights Out (iLO) Advanced: Supported but not included
Component
Value
Product part number
MCS7825H3-K9-CMB2
Preload
Cisco Unified Communications Manager 6.1
OS
Included
Processor
Single Intel Dual Core 3050 2.13 GHz
Memory
2-GB (2 x 1 GB) PC2-5300 ECC DDR2
Hard disks
Two 160-GB SATA 2.5-inch cold-swap drives configured using RAID 1
Remote management
HP iLO Advanced: Supported but not included
Component
Value
Product part number
MCS7825H3-K9-CMB1
Preload
Cisco Unified Communications Manager 6.0
OS
Included
Processor
Single Intel Dual Core 3050 2.13 GHz
Memory
2-GB (two 1-GB) PC2-5300 ECC DDR2
Hard disks
Two 160-GB SATA 2.5-inch cold-swap drive configured using RAID 1
Remote management
HP iLO Advanced: Supported but not included
Component
Value
Product part number
MCS7825H3-K9-CMA2
Preload
Cisco Unified Communications Manager 5.1
OS
Included
Processor
Single Intel Dual Core 3050 2.13 GHz
Memory
2-GB (two 1-GB) PC2-5300 ECC DDR2
Hard disks
Two 160-GB SATA 2.5-inch cold-swap drives configured using RAID 1
Remote management
HP iLO Advanced: Supported but not included
Table 2.
Detailed Specifications of Cisco MCS 7825-H3
Processor at Product Introduction
Maximum processors
1
Processors installed
1 (with 2 cores)
Basic input/output system (BIOS)
type
Flash memory
Memory
Memory maximum
8 GB
Memory bus clock
667 MHz
Memory technology
PC2-5300 667-MHz DDR2 synchronous dynamic RAM (SDRAM)
Total RAM slots
4
Memory maximum
8 GB
© 1992-2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 2 of 6
Data Sheet
RAID Controller
Controller model
Integrated Intel 82801 GR Serial ATA Host Controller with RAID 0/1 support
Interface
SATA
Cache
No
Battery-backed write caching
No
RAID levels supported
0 and 1
Hard disk
Cold-swappable bays
2
Data-transfer rate
150 MB per second
Hard disk average seek time
9 ms
Hard disk interface type
SATA
Network Connectivity
Ethernet network interface card
(NIC)
Dual onboard 10/100/1000
Ethernet connectors
Two RJ-45 connectors on back of server
10BASE-T cable support
EIA Category 3, 4, or 5 unshielded twisted pair (UTP) (2 or 4 pair) up to 328 ft (100m)
100BASE-TX cable support
EIA Category 5 UTP (2 pair) up to 328 ft (100m)
1000BASE-T cable support
EIA category 6 UTP (recommended), 5E UTP, or 5 UTP (2 pair) up to 328 ft (100m)
Expansion Options
8x PCI-Express full height, threequarter length
1
8x PCI-Express low profile, half
length
1
Interface Port Specifications
System management ports
iLO remote
Serial ports
1
Parallel ports
0
USB 2.0 ports
4 (1 at front, 1 internal, 2 back)
Keyboard ports
1
Mouse ports
1
Audio ports
None
Video Graphics Array (VGA) ports
1
Security
● Power-on password
● Keyboard password
● USB port control
● Option to use a selectable boot sequence to prevent unauthorized installation of software or removal of data from the
diskette drive
● Administrator’s password
Power
Power-supply output power
420W (rated steady-state power)
Autoranging AC input
Yes
PFC
Yes
Input requirements range line
voltage
90 to 264 VAC
Nominal line voltage
100 to 120 VAC and 220 to 240 VAC
Rated input current
6A (100 to 120 VAC) to 3A (200 to 240 VAC)
Rated input frequency
47 to 63 Hz
Rated input power
● @ 115V input; Rated input power = 486W (assume Output wattage = 450W)
● @ 230V input; Rated input power = 479W (assume Output wattage = 450W)
© 1992-2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 3 of 6
Data Sheet
Environmental
Operating ambient temperature
50 to 95°F (10 to 35°C)
Operating temperature de-rating
1.8°F per 1000 to 10,000 ft (1°C per 300 to 3000m)
Operating relative humidity
10 to 90% (noncondensing)
Operating maximum wet bulb
temperature
82°F (28°C)
Nonoperating storage temperature
–22 to 140°F (–30 to 60°C)
Nonoperating relative humidity
5 to 95% (noncondensing)
Nonoperating maximum wet bulb
temperature
102°F (38.7°C)
BTU rating
1710 BTU/hr
Sound emissions, idle
6.3 bels (operating)
System Unit
Form factor
Rack-mount 1 rack unit (1RU)
Rack-mounting
Included for standard third-party rack
Weight: Maximum
27.00 lb (12.27 kg)
Dimensions (H x W x D)
1.70 x 16.78 x 24.0 in. (4.32 x 42.62 x 60.96 cm)
Ordering Information
To order this product, visit the Cisco Ordering Home Page and refer to Tables 3 and 4.
You can order the appliance in one of two ways. You can enter UNIFIED-CM-7.0 or UNIFIED-CM6.1 or UNIFIED_CM_6.0 or CallManager-5.1 into the Dynamic Configuration Tool on Cisco.com to
view a list of Cisco Unified Communications Manager Appliances and their associated licenses.
You can also order the components individually using the following product part numbers:
●
MCS7825H3-K9-CMC1 (preloaded with Cisco Unified Communications Manager 7.0)
●
MCS7825H3-K9-CMB2 (preloaded with Cisco Unified Communications Manager 6.1)
●
MCS7825H3-K9-CMB1 (preloaded with Cisco Unified Communications Manager 6.0)
●
MCS7825H3-K9-CMA2 (preloaded with Cisco Unified Communications Manager 5.1)
●
LIC-CM7.0-7825=
●
LIC-CM6.0-7825=
●
LIC-CM5.1-7825=
●
KEY-CCM-ADMIN-K9= (order a minimum quantity of 2)
●
DAT-USB-EXT-72= (optional external USB DAT tape drive)
●
DAT-USB-RM-72= (optional rack-mount USB DAT tape drive)
●
DAT-USB-ADPT= (required if DAT-USB-EXT-72= or DAT-USB-RM-72= are used)
●
MOH-USB-AUDIO= (USB music-on-hold adapter)
Appliance Spares
To order spare appliances, refer to Table 3.
Table 3.
Ordering Information for Spare Appliances
Application
Spare Part Number
Cisco Unified Communications Manager 7.0
MCS7825H3-K9-CMC1
Cisco Unified Communications Manager 6.1
MCS7825H3-K9-CMB2
© 1992-2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 4 of 6
Data Sheet
Cisco Unified Communications Manager 6.0
MCS7825H3-K9-CMB1
Cisco Unified Communications Manager 5.1
MCS7825H3-K9-CMA2
Field-Replaceable Spares
To order spare parts for the servers, refer to Table 4.
Table 4.
Ordering Information for Server Spare Parts
Spare-Part Number
Description
MEM-7825-H3-1GB=
Spare 1-GB SDRAM dual in-line memory module (DIMM) for Cisco MCS 7825-H3 server
HDD-7825-H3-160=
Spare 160-GB SATA hard disk drive, cold-pluggable
DAT-USB-EXT-72=
Spare external USB 36-/72-GB DAT drive
DAT-USB-RM-72=
Spare rack-mount USB 36-/73-GB DAT drive
Warranty Information
Cisco offers a 1-year limited hardware warranty on Cisco media convergence servers. For terms
and conditions of this warranty, refer to
http://www.cisco.com/univercd/cc/td/doc/es_inpck/1y1cen__.htm.
Cisco Unified Communications Services
Cisco Unified Communications Services allows you to accelerate cost savings and productivity
gains associated with deploying a secure, resilient Cisco Unified Communications solution.
Delivered by Cisco and our certified partners, our portfolio of services is based on proven
methodologies for unifying voice, video, data, and mobile applications on fixed and mobile
networks. Our unique lifecycle approach to services enhances your technology experience to
accelerate true business advantage.
Printed in USA
© 1992-2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
C78-394233-01 07/08
Page 5 of 6