WRV54G Firmware v2.39.2 Release Note 2/08/2006 Features added: - Add HTTPS support for Remote Management - Support User Defined ports for Remote Administration - Support PeanutHull DDNS - Open port 60443 (SSL encrypted) for QuickVPN users in case port forwarding is enabled on port 443. Issues fixed: - Modify warning message when the firewall disabled. Now the warning message informs users that Remote Management will be enabled if firewall is disabled. The Remote Management configuration option under Administration->Management is grayed out as a consequence. - Resolved the issue with falsely enabling SSID broadcast. - Resolved issues with MAC Clone - Resolved issue with SNMP traps depending on WAN status - Forced PPP interface netmask to be /32 at PPPoE connection - Resolved issue with email alert using MTA - Resolved issue with NetBIOS broadcast over IPSec tunnel - Resolved issue where DHCP server always replies by unicast at the link layer - Resolved the issue with DNS server's reply to QuickVPN Client - Resolved the issue where QuickVPN cannot work if Domain Name field is left blank - Added timestamp to SYSLOG messages - Resolved various issues with Boingo